8940 errors
1113 warnings

Errors and warnings:

Severity	Code	Description	Project	File	Line	Suppression State
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ExternalResourceDBServer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceDBServer\CS\Application.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ExternalResourceDBServer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceDBServer\CS\Application.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ExternalResourceDBServer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceDBServer\CS\Application.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ExternalResourceDBServer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceDBServer\CS\Application.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ExternalResourceDBServer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceDBServer\CS\Application.cs	33	Active
Error	CS0246	The type or namespace name 'IExternalDBApplication' could not be found (are you missing a using directive or an assembly reference?)	ExternalResourceDBServer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceDBServer\CS\Application.cs	45	Active
Error	CS0246	The type or namespace name 'ExternalDBApplicationResult' could not be found (are you missing a using directive or an assembly reference?)	ExternalResourceDBServer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceDBServer\CS\Application.cs	57	Active
Error	CS0246	The type or namespace name 'ControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	ExternalResourceDBServer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceDBServer\CS\Application.cs	57	Active
Error	CS0246	The type or namespace name 'ExternalDBApplicationResult' could not be found (are you missing a using directive or an assembly reference?)	ExternalResourceDBServer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceDBServer\CS\Application.cs	81	Active
Error	CS0246	The type or namespace name 'ControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	ExternalResourceDBServer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceDBServer\CS\Application.cs	81	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ExternalResourceDBServer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceDBServer\CS\KeynotesDatabase.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ExternalResourceDBServer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceDBServer\CS\KeynotesDatabase.cs	29	Active
Error	CS0246	The type or namespace name 'KeyBasedTreeEntriesLoadContent' could not be found (are you missing a using directive or an assembly reference?)	ExternalResourceDBServer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceDBServer\CS\KeynotesDatabase.cs	72	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ExternalResourceDBServer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceDBServer\CS\SampleExternalResourceDBServer.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ExternalResourceDBServer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceDBServer\CS\SampleExternalResourceDBServer.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ExternalResourceDBServer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceDBServer\CS\SampleExternalResourceDBServer.cs	32	Active
Error	CS0246	The type or namespace name 'IExternalResourceServer' could not be found (are you missing a using directive or an assembly reference?)	ExternalResourceDBServer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceDBServer\CS\SampleExternalResourceDBServer.cs	56	Active
Error	CS0246	The type or namespace name 'ExternalServiceId' could not be found (are you missing a using directive or an assembly reference?)	ExternalResourceDBServer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceDBServer\CS\SampleExternalResourceDBServer.cs	73	Active
Error	CS0246	The type or namespace name 'ExternalResourceType' could not be found (are you missing a using directive or an assembly reference?)	ExternalResourceDBServer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceDBServer\CS\SampleExternalResourceDBServer.cs	146	Active
Error	CS0246	The type or namespace name 'ExternalResourceBrowserData' could not be found (are you missing a using directive or an assembly reference?)	ExternalResourceDBServer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceDBServer\CS\SampleExternalResourceDBServer.cs	166	Active
Error	CS0246	The type or namespace name 'ExternalResourceReference' could not be found (are you missing a using directive or an assembly reference?)	ExternalResourceDBServer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceDBServer\CS\SampleExternalResourceDBServer.cs	196	Active
Error	CS0246	The type or namespace name 'ExternalResourceReference' could not be found (are you missing a using directive or an assembly reference?)	ExternalResourceDBServer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceDBServer\CS\SampleExternalResourceDBServer.cs	252	Active
Error	CS0246	The type or namespace name 'ExternalResourceType' could not be found (are you missing a using directive or an assembly reference?)	ExternalResourceDBServer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceDBServer\CS\SampleExternalResourceDBServer.cs	268	Active
Error	CS0246	The type or namespace name 'ExternalResourceReference' could not be found (are you missing a using directive or an assembly reference?)	ExternalResourceDBServer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceDBServer\CS\SampleExternalResourceDBServer.cs	268	Active
Error	CS0246	The type or namespace name 'ExternalResourceLoadContext' could not be found (are you missing a using directive or an assembly reference?)	ExternalResourceDBServer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceDBServer\CS\SampleExternalResourceDBServer.cs	268	Active
Error	CS0246	The type or namespace name 'ExternalResourceLoadContent' could not be found (are you missing a using directive or an assembly reference?)	ExternalResourceDBServer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceDBServer\CS\SampleExternalResourceDBServer.cs	268	Active
Error	CS0246	The type or namespace name 'ResourceVersionStatus' could not be found (are you missing a using directive or an assembly reference?)	ExternalResourceDBServer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceDBServer\CS\SampleExternalResourceDBServer.cs	310	Active
Error	CS0246	The type or namespace name 'ExternalResourceReference' could not be found (are you missing a using directive or an assembly reference?)	ExternalResourceDBServer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceDBServer\CS\SampleExternalResourceDBServer.cs	310	Active
Error	CS0246	The type or namespace name 'ExternalResourceServerExtensions' could not be found (are you missing a using directive or an assembly reference?)	ExternalResourceDBServer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceDBServer\CS\SampleExternalResourceDBServer.cs	330	Active
Error	CS0246	The type or namespace name 'ExternalResourceReference' could not be found (are you missing a using directive or an assembly reference?)	ExternalResourceDBServer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceDBServer\CS\SampleExternalResourceDBServer.cs	395	Active
Error	CS0246	The type or namespace name 'ExternalResourceBrowserData' could not be found (are you missing a using directive or an assembly reference?)	ExternalResourceDBServer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceDBServer\CS\SampleExternalResourceDBServer.cs	418	Active
Error	CS0246	The type or namespace name 'ExternalResourceReference' could not be found (are you missing a using directive or an assembly reference?)	ExternalResourceDBServer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceDBServer\CS\SampleExternalResourceDBServer.cs	490	Active
Error	CS0246	The type or namespace name 'ExternalResourceBrowserData' could not be found (are you missing a using directive or an assembly reference?)	ExternalResourceDBServer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceDBServer\CS\SampleExternalResourceDBServer.cs	511	Active
Error	CS0246	The type or namespace name 'ExternalResourceReference' could not be found (are you missing a using directive or an assembly reference?)	ExternalResourceDBServer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceDBServer\CS\SampleExternalResourceDBServer.cs	560	Active
Error	CS0246	The type or namespace name 'ExternalResourceLoadContent' could not be found (are you missing a using directive or an assembly reference?)	ExternalResourceDBServer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceDBServer\CS\SampleExternalResourceDBServer.cs	560	Active
Error	CS0246	The type or namespace name 'ExternalResourceReference' could not be found (are you missing a using directive or an assembly reference?)	ExternalResourceDBServer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceDBServer\CS\SampleExternalResourceDBServer.cs	605	Active
Error	CS0246	The type or namespace name 'ExternalResourceLoadContent' could not be found (are you missing a using directive or an assembly reference?)	ExternalResourceDBServer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceDBServer\CS\SampleExternalResourceDBServer.cs	605	Active
Error	CS0246	The type or namespace name 'ExternalResourceReference' could not be found (are you missing a using directive or an assembly reference?)	ExternalResourceDBServer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceDBServer\CS\SampleExternalResourceDBServer.cs	639	Active
Error	CS0246	The type or namespace name 'ExternalResourceReference' could not be found (are you missing a using directive or an assembly reference?)	ExternalResourceDBServer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceDBServer\CS\SampleExternalResourceDBServer.cs	683	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ExternalResourceDBServer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceDBServer\CS\ServerInterfaceExtensionsForRevitLinks.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ExternalResourceDBServer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceDBServer\CS\ServerInterfaceExtensionsForRevitLinks.cs	29	Active
Error	CS0246	The type or namespace name 'IGetLocalPathForOpenCallback' could not be found (are you missing a using directive or an assembly reference?)	ExternalResourceDBServer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceDBServer\CS\ServerInterfaceExtensionsForRevitLinks.cs	39	Active
Error	CS0246	The type or namespace name 'ExternalResourceReference' could not be found (are you missing a using directive or an assembly reference?)	ExternalResourceDBServer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceDBServer\CS\ServerInterfaceExtensionsForRevitLinks.cs	45	Active
Error	CS0246	The type or namespace name 'IOnLocalLinkSharedCoordinatesSavedCallback' could not be found (are you missing a using directive or an assembly reference?)	ExternalResourceDBServer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceDBServer\CS\ServerInterfaceExtensionsForRevitLinks.cs	58	Active
Error	CS0246	The type or namespace name 'ExternalResourceReference' could not be found (are you missing a using directive or an assembly reference?)	ExternalResourceDBServer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceDBServer\CS\ServerInterfaceExtensionsForRevitLinks.cs	65	Active
Error	BC40056	Namespace or type specified in the Imports 'Autodesk.Revit' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.	RevitViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Viewers\RevitViewer\VB.NET\Main.vb	28	Active
Error	BC40056	Namespace or type specified in the Imports 'Autodesk.Revit.DB' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.	RevitViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Viewers\RevitViewer\VB.NET\Main.vb	29	Active
Error	BC40056	Namespace or type specified in the Imports 'Autodesk.Revit.UI' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.	RevitViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Viewers\RevitViewer\VB.NET\Main.vb	30	Active
Error	BC30002	Type 'Autodesk.Revit.Attributes.Transaction' is not defined.	RevitViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Viewers\RevitViewer\VB.NET\Main.vb	36	Active
Error	BC30451	'Autodesk' is not declared. It may be inaccessible due to its protection level.	RevitViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Viewers\RevitViewer\VB.NET\Main.vb	36	Active
Error	BC30002	Type 'Autodesk.Revit.Attributes.Regeneration' is not defined.	RevitViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Viewers\RevitViewer\VB.NET\Main.vb	37	Active
Error	BC30451	'Autodesk' is not declared. It may be inaccessible due to its protection level.	RevitViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Viewers\RevitViewer\VB.NET\Main.vb	37	Active
Error	BC30002	Type 'Autodesk.Revit.Attributes.Journaling' is not defined.	RevitViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Viewers\RevitViewer\VB.NET\Main.vb	38	Active
Error	BC30451	'Autodesk' is not declared. It may be inaccessible due to its protection level.	RevitViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Viewers\RevitViewer\VB.NET\Main.vb	38	Active
Error	BC30002	Type 'IExternalCommand' is not defined.	RevitViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Viewers\RevitViewer\VB.NET\Main.vb	40	Active
Error	BC30002	Type 'ExternalCommandData' is not defined.	RevitViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Viewers\RevitViewer\VB.NET\Main.vb	58	Active
Error	BC30002	Type 'Autodesk.Revit.DB.ElementSet' is not defined.	RevitViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Viewers\RevitViewer\VB.NET\Main.vb	58	Active
Error	BC30002	Type 'Autodesk.Revit.UI.Result' is not defined.	RevitViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Viewers\RevitViewer\VB.NET\Main.vb	58	Active
Error	BC30002	Type 'IExternalCommand' is not defined.	RevitViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Viewers\RevitViewer\VB.NET\Main.vb	58	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SchemaWrapperTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageManager\SchemaWrapperTools\CS\FieldData.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SchemaWrapperTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageManager\SchemaWrapperTools\CS\FieldData.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SchemaWrapperTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageManager\SchemaWrapperTools\CS\FieldData.cs	29	Active
Error	CS0246	The type or namespace name 'ForgeTypeId' could not be found (are you missing a using directive or an assembly reference?)	SchemaWrapperTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageManager\SchemaWrapperTools\CS\FieldData.cs	56	Active
Error	CS0246	The type or namespace name 'ForgeTypeId' could not be found (are you missing a using directive or an assembly reference?)	SchemaWrapperTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageManager\SchemaWrapperTools\CS\FieldData.cs	68	Active
Error	CS0246	The type or namespace name 'ForgeTypeId' could not be found (are you missing a using directive or an assembly reference?)	SchemaWrapperTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageManager\SchemaWrapperTools\CS\FieldData.cs	119	Active
Error	CS0246	The type or namespace name 'ForgeTypeId' could not be found (are you missing a using directive or an assembly reference?)	SchemaWrapperTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageManager\SchemaWrapperTools\CS\FieldData.cs	139	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SchemaWrapperTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageManager\SchemaWrapperTools\CS\SchemaDataWrapper.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SchemaWrapperTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageManager\SchemaWrapperTools\CS\SchemaDataWrapper.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SchemaWrapperTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageManager\SchemaWrapperTools\CS\SchemaDataWrapper.cs	29	Active
Error	CS0246	The type or namespace name 'AccessLevel' could not be found (are you missing a using directive or an assembly reference?)	SchemaWrapperTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageManager\SchemaWrapperTools\CS\SchemaDataWrapper.cs	60	Active
Error	CS0246	The type or namespace name 'AccessLevel' could not be found (are you missing a using directive or an assembly reference?)	SchemaWrapperTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageManager\SchemaWrapperTools\CS\SchemaDataWrapper.cs	60	Active
Error	CS0246	The type or namespace name 'ForgeTypeId' could not be found (are you missing a using directive or an assembly reference?)	SchemaWrapperTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageManager\SchemaWrapperTools\CS\SchemaDataWrapper.cs	81	Active
Error	CS0246	The type or namespace name 'AccessLevel' could not be found (are you missing a using directive or an assembly reference?)	SchemaWrapperTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageManager\SchemaWrapperTools\CS\SchemaDataWrapper.cs	112	Active
Error	CS0246	The type or namespace name 'AccessLevel' could not be found (are you missing a using directive or an assembly reference?)	SchemaWrapperTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageManager\SchemaWrapperTools\CS\SchemaDataWrapper.cs	121	Active
Error	CS0246	The type or namespace name 'AccessLevel' could not be found (are you missing a using directive or an assembly reference?)	SchemaWrapperTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageManager\SchemaWrapperTools\CS\SchemaDataWrapper.cs	177	Active
Error	CS0246	The type or namespace name 'AccessLevel' could not be found (are you missing a using directive or an assembly reference?)	SchemaWrapperTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageManager\SchemaWrapperTools\CS\SchemaDataWrapper.cs	178	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SchemaWrapperTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageManager\SchemaWrapperTools\CS\SchemaWrapper.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SchemaWrapperTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageManager\SchemaWrapperTools\CS\SchemaWrapper.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SchemaWrapperTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageManager\SchemaWrapperTools\CS\SchemaWrapper.cs	29	Active
Error	CS0246	The type or namespace name 'Schema' could not be found (are you missing a using directive or an assembly reference?)	SchemaWrapperTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageManager\SchemaWrapperTools\CS\SchemaWrapper.cs	57	Active
Error	CS0246	The type or namespace name 'AccessLevel' could not be found (are you missing a using directive or an assembly reference?)	SchemaWrapperTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageManager\SchemaWrapperTools\CS\SchemaWrapper.cs	103	Active
Error	CS0246	The type or namespace name 'AccessLevel' could not be found (are you missing a using directive or an assembly reference?)	SchemaWrapperTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageManager\SchemaWrapperTools\CS\SchemaWrapper.cs	103	Active
Error	CS0246	The type or namespace name 'AccessLevel' could not be found (are you missing a using directive or an assembly reference?)	SchemaWrapperTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageManager\SchemaWrapperTools\CS\SchemaWrapper.cs	144	Active
Error	CS0246	The type or namespace name 'AccessLevel' could not be found (are you missing a using directive or an assembly reference?)	SchemaWrapperTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageManager\SchemaWrapperTools\CS\SchemaWrapper.cs	144	Active
Error	CS0246	The type or namespace name 'Schema' could not be found (are you missing a using directive or an assembly reference?)	SchemaWrapperTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageManager\SchemaWrapperTools\CS\SchemaWrapper.cs	150	Active
Error	CS0246	The type or namespace name 'ForgeTypeId' could not be found (are you missing a using directive or an assembly reference?)	SchemaWrapperTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageManager\SchemaWrapperTools\CS\SchemaWrapper.cs	166	Active
Error	CS0246	The type or namespace name 'Entity' could not be found (are you missing a using directive or an assembly reference?)	SchemaWrapperTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageManager\SchemaWrapperTools\CS\SchemaWrapper.cs	309	Active
Error	CS0246	The type or namespace name 'Schema' could not be found (are you missing a using directive or an assembly reference?)	SchemaWrapperTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageManager\SchemaWrapperTools\CS\SchemaWrapper.cs	323	Active
Error	CS0246	The type or namespace name 'Field' could not be found (are you missing a using directive or an assembly reference?)	SchemaWrapperTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageManager\SchemaWrapperTools\CS\SchemaWrapper.cs	372	Active
Error	CS0246	The type or namespace name 'Entity' could not be found (are you missing a using directive or an assembly reference?)	SchemaWrapperTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageManager\SchemaWrapperTools\CS\SchemaWrapper.cs	372	Active
Error	CS0246	The type or namespace name 'Schema' could not be found (are you missing a using directive or an assembly reference?)	SchemaWrapperTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageManager\SchemaWrapperTools\CS\SchemaWrapper.cs	479	Active
Error	CS0246	The type or namespace name 'Schema' could not be found (are you missing a using directive or an assembly reference?)	SchemaWrapperTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageManager\SchemaWrapperTools\CS\SchemaWrapper.cs	485	Active
Error	CS0246	The type or namespace name 'Schema' could not be found (are you missing a using directive or an assembly reference?)	SchemaWrapperTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageManager\SchemaWrapperTools\CS\SchemaWrapper.cs	519	Active
Error	CS0246	The type or namespace name 'SchemaBuilder' could not be found (are you missing a using directive or an assembly reference?)	SchemaWrapperTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageManager\SchemaWrapperTools\CS\SchemaWrapper.cs	522	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	APIAppStartup	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\APIAppStartup\CS\AppSample.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	APIAppStartup	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\APIAppStartup\CS\AppSample.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	APIAppStartup	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\APIAppStartup\CS\AppSample.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	APIAppStartup	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\APIAppStartup\CS\AppSample.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	APIAppStartup	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\APIAppStartup\CS\AppSample.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	APIAppStartup	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\APIAppStartup\CS\AppSample.cs	37	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	APIAppStartup	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\APIAppStartup\CS\AppSample.cs	37	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	APIAppStartup	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\APIAppStartup\CS\AppSample.cs	38	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	APIAppStartup	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\APIAppStartup\CS\AppSample.cs	38	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	APIAppStartup	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\APIAppStartup\CS\AppSample.cs	39	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	APIAppStartup	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\APIAppStartup\CS\AppSample.cs	39	Active
Error	CS0246	The type or namespace name 'IExternalApplication' could not be found (are you missing a using directive or an assembly reference?)	APIAppStartup	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\APIAppStartup\CS\AppSample.cs	40	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	APIAppStartup	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\APIAppStartup\CS\AppSample.cs	44	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	APIAppStartup	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\APIAppStartup\CS\AppSample.cs	44	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	APIAppStartup	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\APIAppStartup\CS\AppSample.cs	50	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	APIAppStartup	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\APIAppStartup\CS\AppSample.cs	50	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AddSpaceAndZone	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\Command.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AddSpaceAndZone	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\Command.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AddSpaceAndZone	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\Command.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AddSpaceAndZone	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\Command.cs	36	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	AddSpaceAndZone	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\Command.cs	36	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AddSpaceAndZone	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\Command.cs	37	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	AddSpaceAndZone	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\Command.cs	37	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AddSpaceAndZone	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\Command.cs	38	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	AddSpaceAndZone	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\Command.cs	38	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	AddSpaceAndZone	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\Command.cs	39	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AddSpaceAndZone	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\Command.cs	57	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AddSpaceAndZone	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\Command.cs	57	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	AddSpaceAndZone	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\Command.cs	59	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AddSpaceAndZone	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\DataManager.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AddSpaceAndZone	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\DataManager.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AddSpaceAndZone	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\DataManager.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AddSpaceAndZone	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\DataManager.cs	30	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	AddSpaceAndZone	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\DataManager.cs	39	Active
Error	CS0246	The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)	AddSpaceAndZone	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\DataManager.cs	40	Active
Error	CS0246	The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)	AddSpaceAndZone	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\DataManager.cs	43	Active
Error	CS0246	The type or namespace name 'Phase' could not be found (are you missing a using directive or an assembly reference?)	AddSpaceAndZone	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\DataManager.cs	44	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	AddSpaceAndZone	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\DataManager.cs	50	Active
Error	CS0246	The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)	AddSpaceAndZone	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\DataManager.cs	114	Active
Error	CS0246	The type or namespace name 'Space' could not be found (are you missing a using directive or an assembly reference?)	AddSpaceAndZone	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\DataManager.cs	174	Active
Error	CS0246	The type or namespace name 'Zone' could not be found (are you missing a using directive or an assembly reference?)	AddSpaceAndZone	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\DataManager.cs	183	Active
Error	CS0246	The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)	AddSpaceAndZone	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\DataManager.cs	192	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AddSpaceAndZone	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\MainForm.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AddSpaceAndZone	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\MainForm.cs	31	Active
Error	CS0246	The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)	AddSpaceAndZone	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\MainForm.cs	117	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AddSpaceAndZone	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\SpaceItem.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AddSpaceAndZone	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\SpaceItem.cs	28	Active
Error	CS0246	The type or namespace name 'Space' could not be found (are you missing a using directive or an assembly reference?)	AddSpaceAndZone	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\SpaceItem.cs	39	Active
Error	CS0246	The type or namespace name 'Space' could not be found (are you missing a using directive or an assembly reference?)	AddSpaceAndZone	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\SpaceItem.cs	40	Active
Error	CS0246	The type or namespace name 'Space' could not be found (are you missing a using directive or an assembly reference?)	AddSpaceAndZone	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\SpaceItem.cs	57	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AddSpaceAndZone	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\SpaceManager.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AddSpaceAndZone	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\SpaceManager.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AddSpaceAndZone	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\SpaceManager.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AddSpaceAndZone	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\SpaceManager.cs	30	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	AddSpaceAndZone	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\SpaceManager.cs	39	Active
Error	CS0246	The type or namespace name 'Space' could not be found (are you missing a using directive or an assembly reference?)	AddSpaceAndZone	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\SpaceManager.cs	40	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	AddSpaceAndZone	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\SpaceManager.cs	47	Active
Error	CS0246	The type or namespace name 'Space' could not be found (are you missing a using directive or an assembly reference?)	AddSpaceAndZone	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\SpaceManager.cs	47	Active
Error	CS0246	The type or namespace name 'Space' could not be found (are you missing a using directive or an assembly reference?)	AddSpaceAndZone	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\SpaceManager.cs	58	Active
Error	CS0246	The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)	AddSpaceAndZone	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\SpaceManager.cs	58	Active
Error	CS0246	The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)	AddSpaceAndZone	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\SpaceManager.cs	68	Active
Error	CS0246	The type or namespace name 'Phase' could not be found (are you missing a using directive or an assembly reference?)	AddSpaceAndZone	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\SpaceManager.cs	68	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AddSpaceAndZone	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\SpaceNode.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AddSpaceAndZone	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\SpaceNode.cs	29	Active
Error	CS0246	The type or namespace name 'Space' could not be found (are you missing a using directive or an assembly reference?)	AddSpaceAndZone	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\SpaceNode.cs	40	Active
Error	CS0246	The type or namespace name 'Space' could not be found (are you missing a using directive or an assembly reference?)	AddSpaceAndZone	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\SpaceNode.cs	46	Active
Error	CS0246	The type or namespace name 'Space' could not be found (are you missing a using directive or an assembly reference?)	AddSpaceAndZone	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\SpaceNode.cs	56	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AddSpaceAndZone	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\ZoneEditorForm.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AddSpaceAndZone	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\ZoneEditorForm.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AddSpaceAndZone	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\ZoneEditorForm.Designer.cs	22	Active
Error	CS0246	The type or namespace name 'Zone' could not be found (are you missing a using directive or an assembly reference?)	AddSpaceAndZone	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\ZoneEditorForm.Designer.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AddSpaceAndZone	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\ZoneManager.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AddSpaceAndZone	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\ZoneManager.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AddSpaceAndZone	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\ZoneManager.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AddSpaceAndZone	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\ZoneManager.cs	29	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	AddSpaceAndZone	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\ZoneManager.cs	38	Active
Error	CS0246	The type or namespace name 'Zone' could not be found (are you missing a using directive or an assembly reference?)	AddSpaceAndZone	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\ZoneManager.cs	39	Active
Error	CS0246	The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)	AddSpaceAndZone	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\ZoneManager.cs	40	Active
Error	CS0246	The type or namespace name 'Zone' could not be found (are you missing a using directive or an assembly reference?)	AddSpaceAndZone	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\ZoneManager.cs	41	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	AddSpaceAndZone	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\ZoneManager.cs	48	Active
Error	CS0246	The type or namespace name 'Zone' could not be found (are you missing a using directive or an assembly reference?)	AddSpaceAndZone	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\ZoneManager.cs	48	Active
Error	CS0246	The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)	AddSpaceAndZone	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\ZoneManager.cs	59	Active
Error	CS0246	The type or namespace name 'Phase' could not be found (are you missing a using directive or an assembly reference?)	AddSpaceAndZone	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\ZoneManager.cs	59	Active
Error	CS0246	The type or namespace name 'SpaceSet' could not be found (are you missing a using directive or an assembly reference?)	AddSpaceAndZone	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\ZoneManager.cs	72	Active
Error	CS0246	The type or namespace name 'SpaceSet' could not be found (are you missing a using directive or an assembly reference?)	AddSpaceAndZone	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\ZoneManager.cs	81	Active
Error	CS0246	The type or namespace name 'Zone' could not be found (are you missing a using directive or an assembly reference?)	AddSpaceAndZone	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\ZoneManager.cs	91	Active
Error	CS0246	The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)	AddSpaceAndZone	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\ZoneManager.cs	91	Active
Error	CS0246	The type or namespace name 'Zone' could not be found (are you missing a using directive or an assembly reference?)	AddSpaceAndZone	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\ZoneManager.cs	100	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AddSpaceAndZone	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\ZoneNode.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AddSpaceAndZone	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\ZoneNode.cs	28	Active
Error	CS0246	The type or namespace name 'Zone' could not be found (are you missing a using directive or an assembly reference?)	AddSpaceAndZone	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\ZoneNode.cs	39	Active
Error	CS0246	The type or namespace name 'Zone' could not be found (are you missing a using directive or an assembly reference?)	AddSpaceAndZone	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\ZoneNode.cs	45	Active
Error	CS0246	The type or namespace name 'Zone' could not be found (are you missing a using directive or an assembly reference?)	AddSpaceAndZone	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\ZoneNode.cs	56	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AllViews	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AllViews\CS\AllViews.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AllViews	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AllViews\CS\AllViews.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AllViews	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AllViews\CS\AllViews.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AllViews	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AllViews\CS\AllViews.cs	40	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	AllViews	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AllViews\CS\AllViews.cs	40	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AllViews	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AllViews\CS\AllViews.cs	41	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	AllViews	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AllViews\CS\AllViews.cs	41	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AllViews	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AllViews\CS\AllViews.cs	42	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	AllViews	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AllViews\CS\AllViews.cs	42	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	AllViews	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AllViews\CS\AllViews.cs	43	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AllViews	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AllViews\CS\AllViews.cs	62	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AllViews	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AllViews\CS\AllViews.cs	62	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AllViews	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AllViews\CS\AllViews.cs	63	Active
Error	CS0246	The type or namespace name 'ViewSet' could not be found (are you missing a using directive or an assembly reference?)	AllViews	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AllViews\CS\AllViews.cs	107	Active
Error	CS0246	The type or namespace name 'ViewSet' could not be found (are you missing a using directive or an assembly reference?)	AllViews	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AllViews\CS\AllViews.cs	108	Active
Error	CS0246	The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)	AllViews	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AllViews\CS\AllViews.cs	109	Active
Error	CS0246	The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)	AllViews	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AllViews\CS\AllViews.cs	110	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	AllViews	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AllViews\CS\AllViews.cs	159	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	AllViews	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AllViews\CS\AllViews.cs	169	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	AllViews	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AllViews\CS\AllViews.cs	263	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	AllViews	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AllViews\CS\AllViews.cs	304	Active
Error	CS0246	The type or namespace name 'ViewSet' could not be found (are you missing a using directive or an assembly reference?)	AllViews	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AllViews\CS\AllViews.cs	331	Active
Error	CS0246	The type or namespace name 'ViewSheet' could not be found (are you missing a using directive or an assembly reference?)	AllViews	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AllViews\CS\AllViews.cs	331	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AllViews	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AllViews\CS\AllViews.cs	377	Active
Error	CS0246	The type or namespace name 'BoundingBoxUV' could not be found (are you missing a using directive or an assembly reference?)	AllViews	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AllViews\CS\AllViews.cs	377	Active
Error	CS0246	The type or namespace name 'BoundingBoxUV' could not be found (are you missing a using directive or an assembly reference?)	AllViews	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AllViews\CS\AllViews.cs	389	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AllViews	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AllViews\CS\AllViews.cs	424	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AnalyticalSupportData_Info	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalyticalSupportData_Info\CS\AnalyticalSupportData_Info.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AnalyticalSupportData_Info	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalyticalSupportData_Info\CS\AnalyticalSupportData_Info.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AnalyticalSupportData_Info	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalyticalSupportData_Info\CS\AnalyticalSupportData_Info.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AnalyticalSupportData_Info	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalyticalSupportData_Info\CS\AnalyticalSupportData_Info.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AnalyticalSupportData_Info	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalyticalSupportData_Info\CS\AnalyticalSupportData_Info.cs	39	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	AnalyticalSupportData_Info	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalyticalSupportData_Info\CS\AnalyticalSupportData_Info.cs	39	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AnalyticalSupportData_Info	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalyticalSupportData_Info\CS\AnalyticalSupportData_Info.cs	40	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	AnalyticalSupportData_Info	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalyticalSupportData_Info\CS\AnalyticalSupportData_Info.cs	40	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AnalyticalSupportData_Info	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalyticalSupportData_Info\CS\AnalyticalSupportData_Info.cs	41	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	AnalyticalSupportData_Info	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalyticalSupportData_Info\CS\AnalyticalSupportData_Info.cs	41	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	AnalyticalSupportData_Info	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalyticalSupportData_Info\CS\AnalyticalSupportData_Info.cs	42	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	AnalyticalSupportData_Info	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalyticalSupportData_Info\CS\AnalyticalSupportData_Info.cs	45	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AnalyticalSupportData_Info	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalyticalSupportData_Info\CS\AnalyticalSupportData_Info.cs	75	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AnalyticalSupportData_Info	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalyticalSupportData_Info\CS\AnalyticalSupportData_Info.cs	75	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	AnalyticalSupportData_Info	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalyticalSupportData_Info\CS\AnalyticalSupportData_Info.cs	77	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	AnalyticalSupportData_Info	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalyticalSupportData_Info\CS\AnalyticalSupportData_Info.cs	107	Active
Error	CS0246	The type or namespace name 'AnalyticalModel' could not be found (are you missing a using directive or an assembly reference?)	AnalyticalSupportData_Info	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalyticalSupportData_Info\CS\AnalyticalSupportData_Info.cs	216	Active
Error	BC2017	could not find library 'Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Viewers\RevitViewer\VB.NET\bin\RevitViewer.dll'	AnalyticalViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Viewers\AnalyticalViewer\VB.NET\vbc	1	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AppearanceAssetEditing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AppearanceAssetEditing\CS\Application.cs	24	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AppearanceAssetEditing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AppearanceAssetEditing\CS\Application.cs	25	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AppearanceAssetEditing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AppearanceAssetEditing\CS\Application.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AppearanceAssetEditing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AppearanceAssetEditing\CS\Application.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AppearanceAssetEditing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AppearanceAssetEditing\CS\Application.cs	28	Active
Error	CS0246	The type or namespace name 'IExternalApplication' could not be found (are you missing a using directive or an assembly reference?)	AppearanceAssetEditing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AppearanceAssetEditing\CS\Application.cs	35	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AppearanceAssetEditing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AppearanceAssetEditing\CS\Application.cs	43	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	AppearanceAssetEditing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AppearanceAssetEditing\CS\Application.cs	44	Active
Error	CS0246	The type or namespace name 'Material' could not be found (are you missing a using directive or an assembly reference?)	AppearanceAssetEditing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AppearanceAssetEditing\CS\Application.cs	45	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	AppearanceAssetEditing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AppearanceAssetEditing\CS\Application.cs	46	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	AppearanceAssetEditing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AppearanceAssetEditing\CS\Application.cs	55	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	AppearanceAssetEditing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AppearanceAssetEditing\CS\Application.cs	55	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	AppearanceAssetEditing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AppearanceAssetEditing\CS\Application.cs	74	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	AppearanceAssetEditing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AppearanceAssetEditing\CS\Application.cs	74	Active
Error	CS0246	The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)	AppearanceAssetEditing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AppearanceAssetEditing\CS\Application.cs	89	Active
Error	CS0246	The type or namespace name 'Color' could not be found (are you missing a using directive or an assembly reference?)	AppearanceAssetEditing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AppearanceAssetEditing\CS\Application.cs	111	Active
Error	CS0246	The type or namespace name 'Color' could not be found (are you missing a using directive or an assembly reference?)	AppearanceAssetEditing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AppearanceAssetEditing\CS\Application.cs	111	Active
Error	CS0246	The type or namespace name 'ISelectionFilter' could not be found (are you missing a using directive or an assembly reference?)	AppearanceAssetEditing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AppearanceAssetEditing\CS\Application.cs	124	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	AppearanceAssetEditing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AppearanceAssetEditing\CS\Application.cs	126	Active
Error	CS0246	The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)	AppearanceAssetEditing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AppearanceAssetEditing\CS\Application.cs	128	Active
Error	CS0246	The type or namespace name 'Reference' could not be found (are you missing a using directive or an assembly reference?)	AppearanceAssetEditing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AppearanceAssetEditing\CS\Application.cs	134	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	AppearanceAssetEditing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AppearanceAssetEditing\CS\Application.cs	134	Active
Error	CS0246	The type or namespace name 'IdlingEventArgs' could not be found (are you missing a using directive or an assembly reference?)	AppearanceAssetEditing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AppearanceAssetEditing\CS\Application.cs	301	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AppearanceAssetEditing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AppearanceAssetEditing\CS\Command.cs	24	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AppearanceAssetEditing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AppearanceAssetEditing\CS\Command.cs	25	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AppearanceAssetEditing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AppearanceAssetEditing\CS\Command.cs	32	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	AppearanceAssetEditing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AppearanceAssetEditing\CS\Command.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AppearanceAssetEditing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AppearanceAssetEditing\CS\Command.cs	33	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	AppearanceAssetEditing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AppearanceAssetEditing\CS\Command.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AppearanceAssetEditing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AppearanceAssetEditing\CS\Command.cs	34	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	AppearanceAssetEditing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AppearanceAssetEditing\CS\Command.cs	34	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	AppearanceAssetEditing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AppearanceAssetEditing\CS\Command.cs	35	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	AppearanceAssetEditing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AppearanceAssetEditing\CS\Command.cs	53	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	AppearanceAssetEditing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AppearanceAssetEditing\CS\Command.cs	53	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	AppearanceAssetEditing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AppearanceAssetEditing\CS\Command.cs	54	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AppearanceAssetEditing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AppearanceAssetEditing\CS\RequestHandler.cs	24	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AppearanceAssetEditing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AppearanceAssetEditing\CS\RequestHandler.cs	25	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AppearanceAssetEditing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AppearanceAssetEditing\CS\RequestHandler.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AppearanceAssetEditing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AppearanceAssetEditing\CS\RequestHandler.cs	27	Active
Error	BC40056	Namespace or type specified in the Imports 'Autodesk.Revit' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.	ArchSample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ArchSample\VB.NET\Command.vb	23	Active
Error	BC40056	Namespace or type specified in the Imports 'Autodesk.Revit.UI' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.	ArchSample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ArchSample\VB.NET\Command.vb	24	Active
Error	BC40056	Namespace or type specified in the Imports 'Autodesk.Revit.DB' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.	ArchSample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ArchSample\VB.NET\Command.vb	25	Active
Error	BC30002	Type 'Autodesk.Revit.Attributes.Transaction' is not defined.	ArchSample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ArchSample\VB.NET\Command.vb	29	Active
Error	BC30451	'Autodesk' is not declared. It may be inaccessible due to its protection level.	ArchSample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ArchSample\VB.NET\Command.vb	29	Active
Error	BC30002	Type 'Autodesk.Revit.Attributes.Regeneration' is not defined.	ArchSample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ArchSample\VB.NET\Command.vb	30	Active
Error	BC30451	'Autodesk' is not declared. It may be inaccessible due to its protection level.	ArchSample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ArchSample\VB.NET\Command.vb	30	Active
Error	BC30002	Type 'Autodesk.Revit.Attributes.Journaling' is not defined.	ArchSample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ArchSample\VB.NET\Command.vb	31	Active
Error	BC30451	'Autodesk' is not declared. It may be inaccessible due to its protection level.	ArchSample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ArchSample\VB.NET\Command.vb	31	Active
Error	BC30002	Type 'IExternalCommand' is not defined.	ArchSample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ArchSample\VB.NET\Command.vb	33	Active
Error	BC30002	Type 'ExternalCommandData' is not defined.	ArchSample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ArchSample\VB.NET\Command.vb	51	Active
Error	BC30002	Type 'Autodesk.Revit.DB.ElementSet' is not defined.	ArchSample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ArchSample\VB.NET\Command.vb	51	Active
Error	BC30002	Type 'Autodesk.Revit.UI.Result' is not defined.	ArchSample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ArchSample\VB.NET\Command.vb	52	Active
Error	BC30002	Type 'IExternalCommand' is not defined.	ArchSample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ArchSample\VB.NET\Command.vb	52	Active
Error	BC30002	Type 'Autodesk.Revit.ApplicationServices.Application' is not defined.	ArchSample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ArchSample\VB.NET\Command.vb	145	Active
Error	BC30002	Type 'Autodesk.Revit.DB.ElementSet' is not defined.	ArchSample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ArchSample\VB.NET\Command.vb	146	Active
Error	BC30002	Type 'Autodesk.Revit.ApplicationServices.Application' is not defined.	ArchSample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ArchSample\VB.NET\Command.vb	232	Active
Error	BC30002	Type 'Autodesk.Revit.DB.Element' is not defined.	ArchSample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ArchSample\VB.NET\Command.vb	233	Active
Error	BC30002	Type 'Autodesk.Revit.ApplicationServices.Application' is not defined.	ArchSample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ArchSample\VB.NET\Command.vb	291	Active
Error	BC30002	Type 'Autodesk.Revit.DB.ElementSet' is not defined.	ArchSample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ArchSample\VB.NET\Command.vb	292	Active
Error	BC30002	Type 'Autodesk.Revit.UI.UIApplication' is not defined.	ArchSample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ArchSample\VB.NET\Command.vb	373	Active
Error	BC30002	Type 'Autodesk.Revit.DB.Document' is not defined.	ArchSample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ArchSample\VB.NET\Command.vb	374	Active
Error	BC30002	Type 'ElementSet' is not defined.	ArchSample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ArchSample\VB.NET\Command.vb	374	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AreaReinCurve	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinCurve\CS\AreaReinCurve.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AreaReinCurve	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinCurve\CS\AreaReinCurve.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AreaReinCurve	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinCurve\CS\AreaReinCurve.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AreaReinCurve	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinCurve\CS\AreaReinCurve.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AreaReinCurve	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinCurve\CS\AreaReinCurve.cs	34	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	AreaReinCurve	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinCurve\CS\AreaReinCurve.cs	34	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AreaReinCurve	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinCurve\CS\AreaReinCurve.cs	35	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	AreaReinCurve	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinCurve\CS\AreaReinCurve.cs	35	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AreaReinCurve	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinCurve\CS\AreaReinCurve.cs	36	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	AreaReinCurve	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinCurve\CS\AreaReinCurve.cs	36	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	AreaReinCurve	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinCurve\CS\AreaReinCurve.cs	37	Active
Error	CS0246	The type or namespace name 'AreaReinforcement' could not be found (are you missing a using directive or an assembly reference?)	AreaReinCurve	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinCurve\CS\AreaReinCurve.cs	39	Active
Error	CS0246	The type or namespace name 'AreaReinforcementCurve' could not be found (are you missing a using directive or an assembly reference?)	AreaReinCurve	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinCurve\CS\AreaReinCurve.cs	40	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	AreaReinCurve	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinCurve\CS\AreaReinCurve.cs	41	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AreaReinCurve	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinCurve\CS\AreaReinCurve.cs	59	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	AreaReinCurve	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinCurve\CS\AreaReinCurve.cs	59	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AreaReinCurve	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinCurve\CS\AreaReinCurve.cs	60	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	AreaReinCurve	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinCurve\CS\AreaReinCurve.cs	126	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AreaReinCurve	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinCurve\CS\GeomUtil.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AreaReinCurve	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinCurve\CS\GeomUtil.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AreaReinCurve	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinCurve\CS\GeomUtil.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AreaReinCurve	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinCurve\CS\GeomUtil.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AreaReinCurve	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinCurve\CS\GeomUtil.cs	34	Active
Error	CS0246	The type or namespace name 'CurveArray' could not be found (are you missing a using directive or an assembly reference?)	AreaReinCurve	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinCurve\CS\GeomUtil.cs	53	Active
Error	CS0246	The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)	AreaReinCurve	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinCurve\CS\GeomUtil.cs	100	Active
Error	CS0246	The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)	AreaReinCurve	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinCurve\CS\GeomUtil.cs	100	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AreaReinCurve	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinCurve\CS\GeomUtil.cs	120	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AreaReinCurve	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinCurve\CS\GeomUtil.cs	120	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AreaReinCurve	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinCurve\CS\GeomUtil.cs	120	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AreaReinCurve	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinCurve\CS\GeomUtil.cs	136	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AreaReinCurve	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinCurve\CS\GeomUtil.cs	136	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AreaReinCurve	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinCurve\CS\ParameterUtil.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AreaReinCurve	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinCurve\CS\ParameterUtil.cs	30	Active
Error	CS0246	The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)	AreaReinCurve	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinCurve\CS\ParameterUtil.cs	43	Active
Error	CS0246	The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)	AreaReinCurve	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinCurve\CS\ParameterUtil.cs	68	Active
Error	CS0246	The type or namespace name 'ParameterSet' could not be found (are you missing a using directive or an assembly reference?)	AreaReinCurve	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinCurve\CS\ParameterUtil.cs	68	Active
Error	CS0246	The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)	AreaReinCurve	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinCurve\CS\ParameterUtil.cs	90	Active
Error	CS0246	The type or namespace name 'BuiltInParameter' could not be found (are you missing a using directive or an assembly reference?)	AreaReinCurve	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinCurve\CS\ParameterUtil.cs	90	Active
Error	CS0246	The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)	AreaReinCurve	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinCurve\CS\ParameterUtil.cs	114	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AreaReinParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\AreaReinData.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AreaReinParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\AreaReinData.cs	31	Active
Error	CS0246	The type or namespace name 'AreaReinforcement' could not be found (are you missing a using directive or an assembly reference?)	AreaReinParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\AreaReinData.cs	43	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AreaReinParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\AreaReinParameters.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AreaReinParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\AreaReinParameters.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AreaReinParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\AreaReinParameters.cs	34	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AreaReinParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\AreaReinParameters.cs	35	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AreaReinParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\AreaReinParameters.cs	40	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	AreaReinParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\AreaReinParameters.cs	40	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AreaReinParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\AreaReinParameters.cs	41	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	AreaReinParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\AreaReinParameters.cs	41	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AreaReinParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\AreaReinParameters.cs	42	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	AreaReinParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\AreaReinParameters.cs	42	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	AreaReinParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\AreaReinParameters.cs	43	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	AreaReinParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\AreaReinParameters.cs	45	Active
Error	CS0246	The type or namespace name 'AreaReinforcement' could not be found (are you missing a using directive or an assembly reference?)	AreaReinParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\AreaReinParameters.cs	48	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AreaReinParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\AreaReinParameters.cs	66	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	AreaReinParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\AreaReinParameters.cs	67	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	AreaReinParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\AreaReinParameters.cs	69	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	AreaReinParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\AreaReinParameters.cs	107	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AreaReinParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\AreaReinParameters.cs	205	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	AreaReinParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\AreaReinParameters.cs	205	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AreaReinParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\AreaReinParameters.cs	206	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	AreaReinParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\AreaReinParameters.cs	206	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	AreaReinParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\AreaReinParameters.cs	207	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AreaReinParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\AreaReinParameters.cs	209	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	AreaReinParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\AreaReinParameters.cs	210	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	AreaReinParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\AreaReinParameters.cs	212	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AreaReinParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\FloorAreaReinData.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AreaReinParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\FloorAreaReinData.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AreaReinParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\FloorAreaReinData.cs	34	Active
Error	CS0246	The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)	AreaReinParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\FloorAreaReinData.cs	43	Active
Error	CS0246	The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)	AreaReinParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\FloorAreaReinData.cs	45	Active
Error	CS0246	The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)	AreaReinParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\FloorAreaReinData.cs	46	Active
Error	CS0246	The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)	AreaReinParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\FloorAreaReinData.cs	47	Active
Error	CS0246	The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)	AreaReinParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\FloorAreaReinData.cs	50	Active
Error	CS0246	The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)	AreaReinParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\FloorAreaReinData.cs	51	Active
Error	CS0246	The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)	AreaReinParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\FloorAreaReinData.cs	52	Active
Error	CS0246	The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)	AreaReinParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\FloorAreaReinData.cs	55	Active
Error	CS0246	The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)	AreaReinParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\FloorAreaReinData.cs	56	Active
Error	CS0246	The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)	AreaReinParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\FloorAreaReinData.cs	57	Active
Error	CS0246	The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)	AreaReinParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\FloorAreaReinData.cs	60	Active
Error	CS0246	The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)	AreaReinParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\FloorAreaReinData.cs	61	Active
Error	CS0246	The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)	AreaReinParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\FloorAreaReinData.cs	62	Active
Error	CS0246	The type or namespace name 'AreaReinforcement' could not be found (are you missing a using directive or an assembly reference?)	AreaReinParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\FloorAreaReinData.cs	69	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AreaReinParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\FloorAreaReinData.cs	141	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AreaReinParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\FloorAreaReinData.cs	154	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AreaReinParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\FloorAreaReinData.cs	184	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AreaReinParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\FloorAreaReinData.cs	197	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AreaReinParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\FloorAreaReinData.cs	227	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AreaReinParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\FloorAreaReinData.cs	240	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AreaReinParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\FloorAreaReinData.cs	270	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AreaReinParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\FloorAreaReinData.cs	283	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AreaReinParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\HookTypeConverter.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AreaReinParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\HookTypeConverter.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AreaReinParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\ParameterUtil.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AreaReinParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\ParameterUtil.cs	32	Active
Error	CS0246	The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)	AreaReinParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\ParameterUtil.cs	49	Active
Error	CS0246	The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)	AreaReinParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\ParameterUtil.cs	74	Active
Error	CS0246	The type or namespace name 'ParameterSet' could not be found (are you missing a using directive or an assembly reference?)	AreaReinParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\ParameterUtil.cs	74	Active
Error	CS0246	The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)	AreaReinParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\ParameterUtil.cs	96	Active
Error	CS0246	The type or namespace name 'BuiltInParameter' could not be found (are you missing a using directive or an assembly reference?)	AreaReinParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\ParameterUtil.cs	96	Active
Error	CS0246	The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)	AreaReinParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\ParameterUtil.cs	120	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AreaReinParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\WallAreaReinData.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AreaReinParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\WallAreaReinData.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AreaReinParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\WallAreaReinData.cs	34	Active
Error	CS0246	The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)	AreaReinParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\WallAreaReinData.cs	43	Active
Error	CS0246	The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)	AreaReinParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\WallAreaReinData.cs	45	Active
Error	CS0246	The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)	AreaReinParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\WallAreaReinData.cs	46	Active
Error	CS0246	The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)	AreaReinParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\WallAreaReinData.cs	47	Active
Error	CS0246	The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)	AreaReinParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\WallAreaReinData.cs	50	Active
Error	CS0246	The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)	AreaReinParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\WallAreaReinData.cs	51	Active
Error	CS0246	The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)	AreaReinParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\WallAreaReinData.cs	52	Active
Error	CS0246	The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)	AreaReinParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\WallAreaReinData.cs	55	Active
Error	CS0246	The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)	AreaReinParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\WallAreaReinData.cs	56	Active
Error	CS0246	The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)	AreaReinParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\WallAreaReinData.cs	57	Active
Error	CS0246	The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)	AreaReinParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\WallAreaReinData.cs	60	Active
Error	CS0246	The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)	AreaReinParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\WallAreaReinData.cs	61	Active
Error	CS0246	The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)	AreaReinParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\WallAreaReinData.cs	62	Active
Error	CS0246	The type or namespace name 'AreaReinforcement' could not be found (are you missing a using directive or an assembly reference?)	AreaReinParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\WallAreaReinData.cs	64	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AreaReinParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\WallAreaReinData.cs	135	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AreaReinParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\WallAreaReinData.cs	148	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AreaReinParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\WallAreaReinData.cs	178	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AreaReinParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\WallAreaReinData.cs	191	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AreaReinParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\WallAreaReinData.cs	221	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AreaReinParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\WallAreaReinData.cs	234	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AreaReinParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\WallAreaReinData.cs	264	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AreaReinParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\WallAreaReinData.cs	277	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AttachedDetailGroup	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AttachedDetailGroup\CS\Application.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AttachedDetailGroup	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AttachedDetailGroup\CS\Application.cs	33	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	AttachedDetailGroup	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AttachedDetailGroup\CS\Application.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AttachedDetailGroup	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AttachedDetailGroup\CS\Application.cs	34	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	AttachedDetailGroup	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AttachedDetailGroup\CS\Application.cs	34	Active
Error	CS0246	The type or namespace name 'IExternalApplication' could not be found (are you missing a using directive or an assembly reference?)	AttachedDetailGroup	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AttachedDetailGroup\CS\Application.cs	35	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	AttachedDetailGroup	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AttachedDetailGroup\CS\Application.cs	44	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	AttachedDetailGroup	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AttachedDetailGroup\CS\Application.cs	44	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	AttachedDetailGroup	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AttachedDetailGroup\CS\Application.cs	54	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	AttachedDetailGroup	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AttachedDetailGroup\CS\Application.cs	54	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	AttachedDetailGroup	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AttachedDetailGroup\CS\Application.cs	66	Active
Error	CS0246	The type or namespace name 'PushButton' could not be found (are you missing a using directive or an assembly reference?)	AttachedDetailGroup	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AttachedDetailGroup\CS\Application.cs	97	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AttachedDetailGroup	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AttachedDetailGroup\CS\AttachedDetailGroupHideAllCommand.cs	23	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AttachedDetailGroup	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AttachedDetailGroup\CS\AttachedDetailGroupHideAllCommand.cs	24	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AttachedDetailGroup	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AttachedDetailGroup\CS\AttachedDetailGroupHideAllCommand.cs	31	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	AttachedDetailGroup	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AttachedDetailGroup\CS\AttachedDetailGroupHideAllCommand.cs	31	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	AttachedDetailGroup	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AttachedDetailGroup\CS\AttachedDetailGroupHideAllCommand.cs	32	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	AttachedDetailGroup	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AttachedDetailGroup\CS\AttachedDetailGroupHideAllCommand.cs	43	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	AttachedDetailGroup	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AttachedDetailGroup\CS\AttachedDetailGroupHideAllCommand.cs	43	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AttachedDetailGroup	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AttachedDetailGroup\CS\AttachedDetailGroupHideAllCommand.cs	43	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AttachedDetailGroup	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AttachedDetailGroup\CS\AttachedDetailGroupShowAllCommand.cs	23	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AttachedDetailGroup	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AttachedDetailGroup\CS\AttachedDetailGroupShowAllCommand.cs	24	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AttachedDetailGroup	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AttachedDetailGroup\CS\AttachedDetailGroupShowAllCommand.cs	31	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	AttachedDetailGroup	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AttachedDetailGroup\CS\AttachedDetailGroupShowAllCommand.cs	31	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	AttachedDetailGroup	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AttachedDetailGroup\CS\AttachedDetailGroupShowAllCommand.cs	32	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	AttachedDetailGroup	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AttachedDetailGroup\CS\AttachedDetailGroupShowAllCommand.cs	43	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	AttachedDetailGroup	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AttachedDetailGroup\CS\AttachedDetailGroupShowAllCommand.cs	43	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AttachedDetailGroup	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AttachedDetailGroup\CS\AttachedDetailGroupShowAllCommand.cs	43	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AttachedDetailGroup	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AttachedDetailGroup\CS\GroupHelper.cs	23	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AttachedDetailGroup	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AttachedDetailGroup\CS\GroupHelper.cs	24	Active
Error	CS0246	The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)	AttachedDetailGroup	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AttachedDetailGroup\CS\GroupHelper.cs	40	Active
Error	CS0246	The type or namespace name 'Group' could not be found (are you missing a using directive or an assembly reference?)	AttachedDetailGroup	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AttachedDetailGroup\CS\GroupHelper.cs	40	Active
Error	CS0246	The type or namespace name 'Group' could not be found (are you missing a using directive or an assembly reference?)	AttachedDetailGroup	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AttachedDetailGroup\CS\GroupHelper.cs	81	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	AttachedDetailGroup	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AttachedDetailGroup\CS\GroupHelper.cs	81	Active
Error	CS0246	The type or namespace name 'View' could not be found (are you missing a using directive or an assembly reference?)	AttachedDetailGroup	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AttachedDetailGroup\CS\GroupHelper.cs	81	Active
Error	CS0246	The type or namespace name 'Group' could not be found (are you missing a using directive or an assembly reference?)	AttachedDetailGroup	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AttachedDetailGroup\CS\GroupHelper.cs	100	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	AttachedDetailGroup	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AttachedDetailGroup\CS\GroupHelper.cs	100	Active
Error	CS0246	The type or namespace name 'View' could not be found (are you missing a using directive or an assembly reference?)	AttachedDetailGroup	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AttachedDetailGroup\CS\GroupHelper.cs	100	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AutoJoin	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoJoin\CS\AutoJoin.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AutoJoin	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoJoin\CS\AutoJoin.cs	27	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	AutoJoin	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoJoin\CS\AutoJoin.cs	49	Active
Error	CS0246	The type or namespace name 'GeomCombination' could not be found (are you missing a using directive or an assembly reference?)	AutoJoin	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoJoin\CS\AutoJoin.cs	96	Active
Error	CS0246	The type or namespace name 'CombinableElement' could not be found (are you missing a using directive or an assembly reference?)	AutoJoin	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoJoin\CS\AutoJoin.cs	96	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	AutoJoin	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoJoin\CS\AutoJoin.cs	96	Active
Error	CS0246	The type or namespace name 'CombinableElement' could not be found (are you missing a using directive or an assembly reference?)	AutoJoin	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoJoin\CS\AutoJoin.cs	185	Active
Error	CS0246	The type or namespace name 'CombinableElement' could not be found (are you missing a using directive or an assembly reference?)	AutoJoin	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoJoin\CS\AutoJoin.cs	185	Active
Error	CS0246	The type or namespace name 'CombinableElement' could not be found (are you missing a using directive or an assembly reference?)	AutoJoin	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoJoin\CS\AutoJoin.cs	196	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AutoJoin	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoJoin\CS\Command.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AutoJoin	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoJoin\CS\Command.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AutoJoin	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoJoin\CS\Command.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AutoJoin	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoJoin\CS\Command.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AutoJoin	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoJoin\CS\Command.cs	38	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	AutoJoin	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoJoin\CS\Command.cs	38	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AutoJoin	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoJoin\CS\Command.cs	39	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	AutoJoin	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoJoin\CS\Command.cs	39	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AutoJoin	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoJoin\CS\Command.cs	40	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	AutoJoin	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoJoin\CS\Command.cs	40	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	AutoJoin	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoJoin\CS\Command.cs	41	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AutoJoin	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoJoin\CS\Command.cs	62	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	AutoJoin	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoJoin\CS\Command.cs	62	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AutoJoin	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoJoin\CS\Command.cs	63	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AutoJoin	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoJoin\CS\Intersection.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AutoJoin	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoJoin\CS\Intersection.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AutoJoin	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoJoin\CS\Intersection.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AutoJoin	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoJoin\CS\Intersection.cs	30	Active
Error	CS0246	The type or namespace name 'GeometryObject' could not be found (are you missing a using directive or an assembly reference?)	AutoJoin	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoJoin\CS\Intersection.cs	45	Active
Error	CS0246	The type or namespace name 'GeometryObject' could not be found (are you missing a using directive or an assembly reference?)	AutoJoin	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoJoin\CS\Intersection.cs	45	Active
Error	CS0246	The type or namespace name 'GeometryObject' could not be found (are you missing a using directive or an assembly reference?)	AutoJoin	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoJoin\CS\Intersection.cs	72	Active
Error	CS0246	The type or namespace name 'Face' could not be found (are you missing a using directive or an assembly reference?)	AutoJoin	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoJoin\CS\Intersection.cs	72	Active
Error	CS0246	The type or namespace name 'Face' could not be found (are you missing a using directive or an assembly reference?)	AutoJoin	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoJoin\CS\Intersection.cs	88	Active
Error	CS0246	The type or namespace name 'Solid' could not be found (are you missing a using directive or an assembly reference?)	AutoJoin	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoJoin\CS\Intersection.cs	100	Active
Error	CS0246	The type or namespace name 'Face' could not be found (are you missing a using directive or an assembly reference?)	AutoJoin	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoJoin\CS\Intersection.cs	100	Active
Error	CS0246	The type or namespace name 'GeometryObject' could not be found (are you missing a using directive or an assembly reference?)	AutoJoin	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoJoin\CS\Intersection.cs	108	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	AutoJoin	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoJoin\CS\Intersection.cs	108	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	AutoJoin	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoJoin\CS\Intersection.cs	123	Active
Error	CS0246	The type or namespace name 'Solid' could not be found (are you missing a using directive or an assembly reference?)	AutoJoin	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoJoin\CS\Intersection.cs	136	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	AutoJoin	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoJoin\CS\Intersection.cs	136	Active
Error	CS0246	The type or namespace name 'Face' could not be found (are you missing a using directive or an assembly reference?)	AutoJoin	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoJoin\CS\Intersection.cs	144	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	AutoJoin	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoJoin\CS\Intersection.cs	144	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AutoParameter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoParameter\CS\Command.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AutoParameter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoParameter\CS\Command.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AutoParameter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoParameter\CS\Command.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AutoParameter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoParameter\CS\Command.cs	39	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	AutoParameter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoParameter\CS\Command.cs	39	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AutoParameter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoParameter\CS\Command.cs	40	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	AutoParameter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoParameter\CS\Command.cs	40	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AutoParameter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoParameter\CS\Command.cs	41	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	AutoParameter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoParameter\CS\Command.cs	41	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	AutoParameter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoParameter\CS\Command.cs	42	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AutoParameter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoParameter\CS\Command.cs	45	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AutoParameter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoParameter\CS\Command.cs	63	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	AutoParameter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoParameter\CS\Command.cs	63	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	AutoParameter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoParameter\CS\Command.cs	65	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AutoParameter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoParameter\CS\Command.cs	140	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	AutoParameter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoParameter\CS\Command.cs	140	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AutoParameter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoParameter\CS\Command.cs	141	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	AutoParameter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoParameter\CS\Command.cs	141	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AutoParameter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoParameter\CS\Command.cs	142	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	AutoParameter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoParameter\CS\Command.cs	142	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	AutoParameter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoParameter\CS\Command.cs	143	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AutoParameter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoParameter\CS\Command.cs	146	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AutoParameter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoParameter\CS\Command.cs	164	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	AutoParameter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoParameter\CS\Command.cs	164	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	AutoParameter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoParameter\CS\Command.cs	166	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AutoParameter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoParameter\CS\FamilyParameterAssigner.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AutoParameter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoParameter\CS\FamilyParameterAssigner.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AutoParameter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoParameter\CS\FamilyParameterAssigner.cs	42	Active
Error	CS0246	The type or namespace name 'FamilyManager' could not be found (are you missing a using directive or an assembly reference?)	AutoParameter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoParameter\CS\FamilyParameterAssigner.cs	43	Active
Error	CS0246	The type or namespace name 'DefinitionFile' could not be found (are you missing a using directive or an assembly reference?)	AutoParameter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoParameter\CS\FamilyParameterAssigner.cs	50	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AutoParameter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoParameter\CS\FamilyParameterAssigner.cs	64	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	AutoParameter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoParameter\CS\FamilyParameterAssigner.cs	64	Active
Error	CS0246	The type or namespace name 'BuiltInParameterGroup' could not be found (are you missing a using directive or an assembly reference?)	AutoParameter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoParameter\CS\FamilyParameterAssigner.cs	405	Active
Error	CS0246	The type or namespace name 'BuiltInParameterGroup' could not be found (are you missing a using directive or an assembly reference?)	AutoParameter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoParameter\CS\FamilyParameterAssigner.cs	409	Active
Error	CS0246	The type or namespace name 'ParameterType' could not be found (are you missing a using directive or an assembly reference?)	AutoParameter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoParameter\CS\FamilyParameterAssigner.cs	414	Active
Error	CS0246	The type or namespace name 'ParameterType' could not be found (are you missing a using directive or an assembly reference?)	AutoParameter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoParameter\CS\FamilyParameterAssigner.cs	418	Active
Error	CS0246	The type or namespace name 'BuiltInParameterGroup' could not be found (are you missing a using directive or an assembly reference?)	AutoParameter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoParameter\CS\FamilyParameterAssigner.cs	466	Active
Error	CS0246	The type or namespace name 'ParameterType' could not be found (are you missing a using directive or an assembly reference?)	AutoParameter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoParameter\CS\FamilyParameterAssigner.cs	466	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AutoRoute	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AutoRoute	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AutoRoute	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AutoRoute	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AutoRoute	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AutoRoute	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs	34	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AutoRoute	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs	41	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	AutoRoute	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs	41	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AutoRoute	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs	42	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	AutoRoute	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs	42	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AutoRoute	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs	43	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	AutoRoute	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs	43	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	AutoRoute	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs	44	Active
Error	CS0246	The type or namespace name 'Application' could not be found (are you missing a using directive or an assembly reference?)	AutoRoute	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs	49	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	AutoRoute	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs	54	Active
Error	CS0246	The type or namespace name 'MechanicalSystem' could not be found (are you missing a using directive or an assembly reference?)	AutoRoute	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs	59	Active
Error	CS0246	The type or namespace name 'DuctType' could not be found (are you missing a using directive or an assembly reference?)	AutoRoute	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs	64	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AutoRoute	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs	69	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	AutoRoute	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs	74	Active
Error	CS0246	The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)	AutoRoute	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs	79	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AutoRoute	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs	130	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	AutoRoute	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs	130	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	AutoRoute	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs	131	Active
Error	CS0246	The type or namespace name 'Connector' could not be found (are you missing a using directive or an assembly reference?)	AutoRoute	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs	377	Active
Error	CS0246	The type or namespace name 'Connector' could not be found (are you missing a using directive or an assembly reference?)	AutoRoute	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs	472	Active
Error	CS0246	The type or namespace name 'Connector' could not be found (are you missing a using directive or an assembly reference?)	AutoRoute	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs	472	Active
Error	CS0246	The type or namespace name 'Connector' could not be found (are you missing a using directive or an assembly reference?)	AutoRoute	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs	502	Active
Error	CS0246	The type or namespace name 'Connector' could not be found (are you missing a using directive or an assembly reference?)	AutoRoute	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs	502	Active
Error	CS0246	The type or namespace name 'Connector' could not be found (are you missing a using directive or an assembly reference?)	AutoRoute	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs	502	Active
Error	CS0246	The type or namespace name 'Connector' could not be found (are you missing a using directive or an assembly reference?)	AutoRoute	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs	562	Active
Error	CS0246	The type or namespace name 'Connector' could not be found (are you missing a using directive or an assembly reference?)	AutoRoute	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs	591	Active
Error	CS0246	The type or namespace name 'Connector' could not be found (are you missing a using directive or an assembly reference?)	AutoRoute	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs	686	Active
Error	CS0246	The type or namespace name 'Connector' could not be found (are you missing a using directive or an assembly reference?)	AutoRoute	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs	686	Active
Error	CS0246	The type or namespace name 'Connector' could not be found (are you missing a using directive or an assembly reference?)	AutoRoute	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs	716	Active
Error	CS0246	The type or namespace name 'Connector' could not be found (are you missing a using directive or an assembly reference?)	AutoRoute	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs	716	Active
Error	CS0246	The type or namespace name 'Connector' could not be found (are you missing a using directive or an assembly reference?)	AutoRoute	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs	716	Active
Error	CS0246	The type or namespace name 'Connector' could not be found (are you missing a using directive or an assembly reference?)	AutoRoute	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs	776	Active
Error	CS0246	The type or namespace name 'Connector' could not be found (are you missing a using directive or an assembly reference?)	AutoRoute	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs	802	Active
Error	CS0246	The type or namespace name 'MechanicalSystem' could not be found (are you missing a using directive or an assembly reference?)	AutoRoute	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs	821	Active
Error	CS0246	The type or namespace name 'DuctSystemType' could not be found (are you missing a using directive or an assembly reference?)	AutoRoute	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs	821	Active
Error	CS0246	The type or namespace name 'Connector' could not be found (are you missing a using directive or an assembly reference?)	AutoRoute	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs	854	Active
Error	CS0246	The type or namespace name 'Connector' could not be found (are you missing a using directive or an assembly reference?)	AutoRoute	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs	859	Active
Error	CS0246	The type or namespace name 'Connector' could not be found (are you missing a using directive or an assembly reference?)	AutoRoute	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs	913	Active
Error	CS0246	The type or namespace name 'ConnectorSet' could not be found (are you missing a using directive or an assembly reference?)	AutoRoute	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs	931	Active
Error	CS0246	The type or namespace name 'ConnectorSet' could not be found (are you missing a using directive or an assembly reference?)	AutoRoute	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs	943	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AutoRoute	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs	943	Active
Error	CS0246	The type or namespace name 'Connector' could not be found (are you missing a using directive or an assembly reference?)	AutoRoute	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs	972	Active
Error	CS0246	The type or namespace name 'ConnectorManager' could not be found (are you missing a using directive or an assembly reference?)	AutoRoute	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs	972	Active
Error	CS0246	The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)	AutoRoute	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs	1004	Active
Error	CS0246	The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)	AutoRoute	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs	1013	Active
Error	CS0246	The type or namespace name 'MechanicalSystem' could not be found (are you missing a using directive or an assembly reference?)	AutoRoute	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs	1045	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	AutoRoute	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs	1071	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AutoRoute	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs	1071	Active
Error	CS0246	The type or namespace name 'MEPSystem' could not be found (are you missing a using directive or an assembly reference?)	AutoRoute	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs	1081	Active
Error	CS0246	The type or namespace name 'Connector' could not be found (are you missing a using directive or an assembly reference?)	AutoRoute	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs	1107	Active
Error	CS0246	The type or namespace name 'ConnectorManager' could not be found (are you missing a using directive or an assembly reference?)	AutoRoute	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs	1157	Active
Error	CS0246	The type or namespace name 'Connector' could not be found (are you missing a using directive or an assembly reference?)	AutoRoute	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs	1174	Active
Error	CS0246	The type or namespace name 'Connector' could not be found (are you missing a using directive or an assembly reference?)	AutoRoute	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs	1225	Active
Error	CS0246	The type or namespace name 'Connector' could not be found (are you missing a using directive or an assembly reference?)	AutoRoute	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs	1248	Active
Error	CS0246	The type or namespace name 'ConnectorSet' could not be found (are you missing a using directive or an assembly reference?)	AutoRoute	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs	1262	Active
Error	CS0246	The type or namespace name 'ConnectorSet' could not be found (are you missing a using directive or an assembly reference?)	AutoRoute	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs	1300	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AutoStamp	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\AutoStamp\CS\Application.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AutoStamp	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\AutoStamp\CS\Application.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AutoStamp	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\AutoStamp\CS\Application.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AutoStamp	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\AutoStamp\CS\Application.cs	38	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	AutoStamp	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\AutoStamp\CS\Application.cs	38	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AutoStamp	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\AutoStamp\CS\Application.cs	39	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	AutoStamp	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\AutoStamp\CS\Application.cs	39	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AutoStamp	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\AutoStamp\CS\Application.cs	40	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	AutoStamp	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\AutoStamp\CS\Application.cs	40	Active
Error	CS0246	The type or namespace name 'IExternalApplication' could not be found (are you missing a using directive or an assembly reference?)	AutoStamp	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\AutoStamp\CS\Application.cs	41	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AutoStamp	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\AutoStamp\CS\Application.cs	57	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	AutoStamp	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\AutoStamp\CS\Application.cs	57	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AutoStamp	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\AutoStamp\CS\Application.cs	71	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	AutoStamp	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\AutoStamp\CS\Application.cs	71	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AutoStamp	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\AutoStamp\CS\EventsReactor.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AutoStamp	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\AutoStamp\CS\EventsReactor.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AutoStamp	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\AutoStamp\CS\EventsReactor.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AutoStamp	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\AutoStamp\CS\EventsReactor.cs	66	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AutoStamp	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\AutoStamp\CS\EventsReactor.cs	110	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AutoStamp	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\AutoStamp\CS\EventsReactor.cs	177	Active
Error	CS0246	The type or namespace name 'RevitAPIEventArgs' could not be found (are you missing a using directive or an assembly reference?)	AutoStamp	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\AutoStamp\CS\EventsReactor.cs	235	Active
Error	CS0246	The type or namespace name 'View' could not be found (are you missing a using directive or an assembly reference?)	AutoStamp	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\AutoStamp\CS\EventsReactor.cs	269	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AutoTagRooms	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoTagRooms\CS\AutoTagRoomsForm.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AutoTagRooms	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoTagRooms\CS\AutoTagRoomsForm.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AutoTagRooms	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoTagRooms\CS\Command.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AutoTagRooms	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoTagRooms\CS\Command.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AutoTagRooms	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoTagRooms\CS\Command.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AutoTagRooms	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoTagRooms\CS\Command.cs	36	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	AutoTagRooms	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoTagRooms\CS\Command.cs	36	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AutoTagRooms	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoTagRooms\CS\Command.cs	37	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	AutoTagRooms	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoTagRooms\CS\Command.cs	37	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AutoTagRooms	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoTagRooms\CS\Command.cs	38	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	AutoTagRooms	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoTagRooms\CS\Command.cs	38	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	AutoTagRooms	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoTagRooms\CS\Command.cs	39	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AutoTagRooms	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoTagRooms\CS\Command.cs	57	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AutoTagRooms	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoTagRooms\CS\Command.cs	57	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	AutoTagRooms	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoTagRooms\CS\Command.cs	59	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AutoTagRooms	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoTagRooms\CS\RoomsData.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AutoTagRooms	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoTagRooms\CS\RoomsData.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AutoTagRooms	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoTagRooms\CS\RoomsData.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AutoTagRooms	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoTagRooms\CS\RoomsData.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AutoTagRooms	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoTagRooms\CS\RoomsData.cs	34	Active
Error	CS0246	The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)	AutoTagRooms	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoTagRooms\CS\RoomsData.cs	44	Active
Error	CS0246	The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)	AutoTagRooms	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoTagRooms\CS\RoomsData.cs	46	Active
Error	CS0246	The type or namespace name 'Room' could not be found (are you missing a using directive or an assembly reference?)	AutoTagRooms	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoTagRooms\CS\RoomsData.cs	48	Active
Error	CS0246	The type or namespace name 'RoomTagType' could not be found (are you missing a using directive or an assembly reference?)	AutoTagRooms	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoTagRooms\CS\RoomsData.cs	50	Active
Error	CS0246	The type or namespace name 'RoomTag' could not be found (are you missing a using directive or an assembly reference?)	AutoTagRooms	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoTagRooms\CS\RoomsData.cs	52	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	AutoTagRooms	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoTagRooms\CS\RoomsData.cs	58	Active
Error	CS0246	The type or namespace name 'Room' could not be found (are you missing a using directive or an assembly reference?)	AutoTagRooms	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoTagRooms\CS\RoomsData.cs	69	Active
Error	CS0246	The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)	AutoTagRooms	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoTagRooms\CS\RoomsData.cs	80	Active
Error	CS0246	The type or namespace name 'RoomTagType' could not be found (are you missing a using directive or an assembly reference?)	AutoTagRooms	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoTagRooms\CS\RoomsData.cs	91	Active
Error	CS0246	The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)	AutoTagRooms	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoTagRooms\CS\RoomsData.cs	161	Active
Error	CS0246	The type or namespace name 'RoomTagType' could not be found (are you missing a using directive or an assembly reference?)	AutoTagRooms	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoTagRooms\CS\RoomsData.cs	161	Active
Error	CS0246	The type or namespace name 'Room' could not be found (are you missing a using directive or an assembly reference?)	AutoTagRooms	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoTagRooms\CS\RoomsData.cs	193	Active
Error	CS0246	The type or namespace name 'RoomTagType' could not be found (are you missing a using directive or an assembly reference?)	AutoTagRooms	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoTagRooms\CS\RoomsData.cs	193	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AutoUpdate	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\AutoUpdate\CS\ExternalApplication.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AutoUpdate	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\AutoUpdate\CS\ExternalApplication.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AutoUpdate	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\AutoUpdate\CS\ExternalApplication.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AutoUpdate	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\AutoUpdate\CS\ExternalApplication.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AutoUpdate	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\AutoUpdate\CS\ExternalApplication.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AutoUpdate	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\AutoUpdate\CS\ExternalApplication.cs	43	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	AutoUpdate	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\AutoUpdate\CS\ExternalApplication.cs	43	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AutoUpdate	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\AutoUpdate\CS\ExternalApplication.cs	44	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	AutoUpdate	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\AutoUpdate\CS\ExternalApplication.cs	44	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AutoUpdate	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\AutoUpdate\CS\ExternalApplication.cs	45	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	AutoUpdate	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\AutoUpdate\CS\ExternalApplication.cs	45	Active
Error	CS0246	The type or namespace name 'IExternalApplication' could not be found (are you missing a using directive or an assembly reference?)	AutoUpdate	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\AutoUpdate\CS\ExternalApplication.cs	46	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AutoUpdate	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\AutoUpdate\CS\ExternalApplication.cs	78	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	AutoUpdate	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\AutoUpdate\CS\ExternalApplication.cs	78	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AutoUpdate	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\AutoUpdate\CS\ExternalApplication.cs	111	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	AutoUpdate	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\AutoUpdate\CS\ExternalApplication.cs	111	Active
Error	CS0246	The type or namespace name 'DocumentOpenedEventArgs' could not be found (are you missing a using directive or an assembly reference?)	AutoUpdate	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\AutoUpdate\CS\ExternalApplication.cs	126	Active
Error	CS0246	The type or namespace name 'DocumentOpenedEventArgs' could not be found (are you missing a using directive or an assembly reference?)	AutoUpdate	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\AutoUpdate\CS\ExternalApplication.cs	166	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AvoidObstruction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Command.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AvoidObstruction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Command.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AvoidObstruction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Command.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AvoidObstruction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Command.cs	36	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	AvoidObstruction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Command.cs	36	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AvoidObstruction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Command.cs	37	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	AvoidObstruction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Command.cs	37	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AvoidObstruction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Command.cs	38	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	AvoidObstruction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Command.cs	38	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	AvoidObstruction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Command.cs	39	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AvoidObstruction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Command.cs	59	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	AvoidObstruction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Command.cs	59	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AvoidObstruction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Command.cs	59	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AvoidObstruction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Detector.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AvoidObstruction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Detector.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AvoidObstruction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Detector.cs	29	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	AvoidObstruction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Detector.cs	41	Active
Error	CS0246	The type or namespace name 'View3D' could not be found (are you missing a using directive or an assembly reference?)	AvoidObstruction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Detector.cs	46	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	AvoidObstruction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Detector.cs	52	Active
Error	CS0246	The type or namespace name 'ReferenceWithContext' could not be found (are you missing a using directive or an assembly reference?)	AvoidObstruction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Detector.cs	72	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AvoidObstruction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Detector.cs	72	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AvoidObstruction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Detector.cs	72	Active
Error	CS0246	The type or namespace name 'ReferenceWithContext' could not be found (are you missing a using directive or an assembly reference?)	AvoidObstruction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Detector.cs	95	Active
Error	CS0246	The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)	AvoidObstruction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Detector.cs	95	Active
Error	CS0246	The type or namespace name 'ReferenceWithContext' could not be found (are you missing a using directive or an assembly reference?)	AvoidObstruction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Detector.cs	130	Active
Error	CS0246	The type or namespace name 'ReferenceWithContext' could not be found (are you missing a using directive or an assembly reference?)	AvoidObstruction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Detector.cs	130	Active
Error	CS0246	The type or namespace name 'ReferenceWithContext' could not be found (are you missing a using directive or an assembly reference?)	AvoidObstruction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Detector.cs	149	Active
Error	CS0246	The type or namespace name 'ReferenceWithContext' could not be found (are you missing a using directive or an assembly reference?)	AvoidObstruction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Detector.cs	149	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AvoidObstruction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Resolver.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AvoidObstruction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Resolver.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AvoidObstruction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Resolver.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AvoidObstruction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Resolver.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AvoidObstruction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Resolver.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AvoidObstruction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Resolver.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AvoidObstruction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Resolver.cs	34	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	AvoidObstruction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Resolver.cs	47	Active
Error	CS0246	The type or namespace name 'Application' could not be found (are you missing a using directive or an assembly reference?)	AvoidObstruction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Resolver.cs	52	Active
Error	CS0246	The type or namespace name 'PipingSystemType' could not be found (are you missing a using directive or an assembly reference?)	AvoidObstruction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Resolver.cs	60	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	AvoidObstruction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Resolver.cs	66	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AvoidObstruction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Resolver.cs	105	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AvoidObstruction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Resolver.cs	105	Active
Error	CS0246	The type or namespace name 'Pipe' could not be found (are you missing a using directive or an assembly reference?)	AvoidObstruction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Resolver.cs	125	Active
Error	CS0246	The type or namespace name 'Pipe' could not be found (are you missing a using directive or an assembly reference?)	AvoidObstruction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Resolver.cs	249	Active
Error	CS0246	The type or namespace name 'ReferenceWithContext' could not be found (are you missing a using directive or an assembly reference?)	AvoidObstruction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Resolver.cs	249	Active
Error	CS0246	The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)	AvoidObstruction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Resolver.cs	270	Active
Error	CS0246	The type or namespace name 'Pipe' could not be found (are you missing a using directive or an assembly reference?)	AvoidObstruction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Resolver.cs	270	Active
Error	CS0246	The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)	AvoidObstruction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Resolver.cs	370	Active
Error	CS0246	The type or namespace name 'Pipe' could not be found (are you missing a using directive or an assembly reference?)	AvoidObstruction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Resolver.cs	370	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AvoidObstruction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Resolver.cs	370	Active
Error	CS0246	The type or namespace name 'ReferenceWithContext' could not be found (are you missing a using directive or an assembly reference?)	AvoidObstruction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Resolver.cs	397	Active
Error	CS0246	The type or namespace name 'ReferenceWithContext' could not be found (are you missing a using directive or an assembly reference?)	AvoidObstruction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Resolver.cs	397	Active
Error	CS0246	The type or namespace name 'Pipe' could not be found (are you missing a using directive or an assembly reference?)	AvoidObstruction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Resolver.cs	432	Active
Error	CS0246	The type or namespace name 'Pipe' could not be found (are you missing a using directive or an assembly reference?)	AvoidObstruction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Resolver.cs	487	Active
Error	CS0246	The type or namespace name 'Pipe' could not be found (are you missing a using directive or an assembly reference?)	AvoidObstruction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Resolver.cs	487	Active
Error	CS0246	The type or namespace name 'Connector' could not be found (are you missing a using directive or an assembly reference?)	AvoidObstruction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Resolver.cs	499	Active
Error	CS0246	The type or namespace name 'Pipe' could not be found (are you missing a using directive or an assembly reference?)	AvoidObstruction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Resolver.cs	499	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AvoidObstruction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Resolver.cs	499	Active
Error	CS0246	The type or namespace name 'Connector' could not be found (are you missing a using directive or an assembly reference?)	AvoidObstruction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Resolver.cs	519	Active
Error	CS0246	The type or namespace name 'Pipe' could not be found (are you missing a using directive or an assembly reference?)	AvoidObstruction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Resolver.cs	519	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AvoidObstruction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Resolver.cs	519	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AvoidObstruction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Section.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AvoidObstruction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Section.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AvoidObstruction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Section.cs	39	Active
Error	CS0246	The type or namespace name 'ReferenceWithContext' could not be found (are you missing a using directive or an assembly reference?)	AvoidObstruction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Section.cs	54	Active
Error	CS0246	The type or namespace name 'Pipe' could not be found (are you missing a using directive or an assembly reference?)	AvoidObstruction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Section.cs	60	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AvoidObstruction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Section.cs	66	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AvoidObstruction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Section.cs	78	Active
Error	CS0246	The type or namespace name 'Pipe' could not be found (are you missing a using directive or an assembly reference?)	AvoidObstruction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Section.cs	87	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AvoidObstruction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Section.cs	95	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AvoidObstruction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Section.cs	106	Active
Error	CS0246	The type or namespace name 'ReferenceWithContext' could not be found (are you missing a using directive or an assembly reference?)	AvoidObstruction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Section.cs	117	Active
Error	CS0246	The type or namespace name 'ReferenceWithContext' could not be found (are you missing a using directive or an assembly reference?)	AvoidObstruction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Section.cs	151	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	AvoidObstruction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Section.cs	151	Active
Error	CS0246	The type or namespace name 'ReferenceWithContext' could not be found (are you missing a using directive or an assembly reference?)	AvoidObstruction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Section.cs	184	Active
Error	CS0246	The type or namespace name 'ReferenceWithContext' could not be found (are you missing a using directive or an assembly reference?)	AvoidObstruction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Section.cs	184	Active
Error	CS0246	The type or namespace name 'ReferenceWithContext' could not be found (are you missing a using directive or an assembly reference?)	AvoidObstruction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Section.cs	184	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	BRepBuilderExample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\Application.cs	34	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	BRepBuilderExample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\Application.cs	35	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	BRepBuilderExample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\Application.cs	36	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	BRepBuilderExample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\Application.cs	37	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	BRepBuilderExample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\Application.cs	38	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	BRepBuilderExample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\Application.cs	45	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	BRepBuilderExample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\Application.cs	45	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	BRepBuilderExample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\Application.cs	46	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	BRepBuilderExample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\Application.cs	46	Active
Error	CS0246	The type or namespace name 'IExternalApplication' could not be found (are you missing a using directive or an assembly reference?)	BRepBuilderExample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\Application.cs	47	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	BRepBuilderExample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\Application.cs	57	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	BRepBuilderExample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\Application.cs	57	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	BRepBuilderExample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\Application.cs	67	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	BRepBuilderExample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\Application.cs	67	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	BRepBuilderExample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\Application.cs	82	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	BRepBuilderExample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\CreateCube.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	BRepBuilderExample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\CreateCube.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	BRepBuilderExample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\CreateCube.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	BRepBuilderExample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\CreateCube.cs	38	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	BRepBuilderExample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\CreateCube.cs	38	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	BRepBuilderExample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\CreateCube.cs	39	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	BRepBuilderExample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\CreateCube.cs	57	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	BRepBuilderExample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\CreateCube.cs	57	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	BRepBuilderExample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\CreateCube.cs	57	Active
Error	CS0246	The type or namespace name 'BRepBuilder' could not be found (are you missing a using directive or an assembly reference?)	BRepBuilderExample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\CreateCube.cs	92	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	BRepBuilderExample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\CreateCube.cs	216	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	BRepBuilderExample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\CreateNURBS.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	BRepBuilderExample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\CreateNURBS.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	BRepBuilderExample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\CreateNURBS.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	BRepBuilderExample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\CreateNURBS.cs	37	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	BRepBuilderExample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\CreateNURBS.cs	37	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	BRepBuilderExample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\CreateNURBS.cs	38	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	BRepBuilderExample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\CreateNURBS.cs	56	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	BRepBuilderExample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\CreateNURBS.cs	56	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	BRepBuilderExample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\CreateNURBS.cs	56	Active
Error	CS0246	The type or namespace name 'BRepBuilder' could not be found (are you missing a using directive or an assembly reference?)	BRepBuilderExample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\CreateNURBS.cs	87	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	BRepBuilderExample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\CreateNURBS.cs	149	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	BRepBuilderExample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\CreatePeriodic.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	BRepBuilderExample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\CreatePeriodic.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	BRepBuilderExample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\CreatePeriodic.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	BRepBuilderExample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\CreatePeriodic.cs	37	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	BRepBuilderExample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\CreatePeriodic.cs	37	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	BRepBuilderExample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\CreatePeriodic.cs	38	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	BRepBuilderExample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\CreatePeriodic.cs	56	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	BRepBuilderExample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\CreatePeriodic.cs	56	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	BRepBuilderExample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\CreatePeriodic.cs	56	Active
Error	CS0246	The type or namespace name 'BRepBuilder' could not be found (are you missing a using directive or an assembly reference?)	BRepBuilderExample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\CreatePeriodic.cs	82	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	BRepBuilderExample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\CreatePeriodic.cs	259	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	BeamAndSlabNewParameter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BeamAndSlabNewParameter\CS\BeamAndSlabNewParameter.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	BeamAndSlabNewParameter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BeamAndSlabNewParameter\CS\BeamAndSlabNewParameter.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	BeamAndSlabNewParameter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BeamAndSlabNewParameter\CS\BeamAndSlabNewParameter.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	BeamAndSlabNewParameter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BeamAndSlabNewParameter\CS\BeamAndSlabNewParameter.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	BeamAndSlabNewParameter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BeamAndSlabNewParameter\CS\BeamAndSlabNewParameter.cs	41	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	BeamAndSlabNewParameter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BeamAndSlabNewParameter\CS\BeamAndSlabNewParameter.cs	41	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	BeamAndSlabNewParameter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BeamAndSlabNewParameter\CS\BeamAndSlabNewParameter.cs	42	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	BeamAndSlabNewParameter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BeamAndSlabNewParameter\CS\BeamAndSlabNewParameter.cs	42	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	BeamAndSlabNewParameter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BeamAndSlabNewParameter\CS\BeamAndSlabNewParameter.cs	43	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	BeamAndSlabNewParameter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BeamAndSlabNewParameter\CS\BeamAndSlabNewParameter.cs	43	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	BeamAndSlabNewParameter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BeamAndSlabNewParameter\CS\BeamAndSlabNewParameter.cs	44	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	BeamAndSlabNewParameter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BeamAndSlabNewParameter\CS\BeamAndSlabNewParameter.cs	46	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	BeamAndSlabNewParameter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BeamAndSlabNewParameter\CS\BeamAndSlabNewParameter.cs	47	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	BeamAndSlabNewParameter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BeamAndSlabNewParameter\CS\BeamAndSlabNewParameter.cs	65	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	BeamAndSlabNewParameter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BeamAndSlabNewParameter\CS\BeamAndSlabNewParameter.cs	65	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	BeamAndSlabNewParameter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BeamAndSlabNewParameter\CS\BeamAndSlabNewParameter.cs	67	Active
Error	CS0246	The type or namespace name 'DefinitionFile' could not be found (are you missing a using directive or an assembly reference?)	BeamAndSlabNewParameter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BeamAndSlabNewParameter\CS\BeamAndSlabNewParameter.cs	346	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	BeamAndSlabNewParameter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BeamAndSlabNewParameter\CS\BeamAndSlabNewParameterForm.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	BoundaryConditions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BoundaryConditions\CS\BCProperties.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	BoundaryConditions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BoundaryConditions\CS\BCProperties.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	BoundaryConditions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BoundaryConditions\CS\BCProperties.cs	180	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	BoundaryConditions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BoundaryConditions\CS\BCProperties.cs	484	Active
Error	CS0246	The type or namespace name 'BuiltInParameterGroup' could not be found (are you missing a using directive or an assembly reference?)	BoundaryConditions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BoundaryConditions\CS\BCProperties.cs	591	Active
Error	CS0246	The type or namespace name 'BuiltInParameterGroup' could not be found (are you missing a using directive or an assembly reference?)	BoundaryConditions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BoundaryConditions\CS\BCProperties.cs	633	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	BoundaryConditions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BoundaryConditions\CS\BoundaryConditionsData.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	BoundaryConditions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BoundaryConditions\CS\BoundaryConditionsData.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	BoundaryConditions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BoundaryConditions\CS\BoundaryConditionsData.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	BoundaryConditions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BoundaryConditions\CS\BoundaryConditionsData.cs	48	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	BoundaryConditions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BoundaryConditions\CS\BoundaryConditionsData.cs	52	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	BoundaryConditions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BoundaryConditions\CS\BoundaryConditionsData.cs	80	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	BoundaryConditions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BoundaryConditions\CS\BoundaryConditionsData.cs	91	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	BoundaryConditions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BoundaryConditions\CS\BoundaryConditionsData.cs	104	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	BoundaryConditions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BoundaryConditions\CS\BoundaryConditionsData.cs	105	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	BoundaryConditions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BoundaryConditions\CS\BoundaryConditionsData.cs	115	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	BoundaryConditions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BoundaryConditions\CS\BoundaryConditionsData.cs	188	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	BoundaryConditions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BoundaryConditions\CS\BoundaryConditionsData.cs	214	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	BoundaryConditions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BoundaryConditions\CS\BoundaryConditionsData.cs	214	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	BoundaryConditions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BoundaryConditions\CS\BoundaryConditionsData.cs	250	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	BoundaryConditions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BoundaryConditions\CS\BoundaryConditionsData.cs	250	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	BoundaryConditions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BoundaryConditions\CS\BoundaryConditionsData.cs	267	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	BoundaryConditions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BoundaryConditions\CS\BoundaryConditionsData.cs	267	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	BoundaryConditions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BoundaryConditions\CS\Command.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	BoundaryConditions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BoundaryConditions\CS\Command.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	BoundaryConditions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BoundaryConditions\CS\Command.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	BoundaryConditions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BoundaryConditions\CS\Command.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	BoundaryConditions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BoundaryConditions\CS\Command.cs	39	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	BoundaryConditions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BoundaryConditions\CS\Command.cs	39	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	BoundaryConditions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BoundaryConditions\CS\Command.cs	40	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	BoundaryConditions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BoundaryConditions\CS\Command.cs	40	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	BoundaryConditions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BoundaryConditions\CS\Command.cs	41	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	BoundaryConditions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BoundaryConditions\CS\Command.cs	41	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	BoundaryConditions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BoundaryConditions\CS\Command.cs	42	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	BoundaryConditions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BoundaryConditions\CS\Command.cs	60	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	BoundaryConditions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BoundaryConditions\CS\Command.cs	60	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	BoundaryConditions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BoundaryConditions\CS\Command.cs	62	Active
Error	CS0246	The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)	BoundaryConditions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BoundaryConditions\CS\Command.cs	134	Active
Error	BC30002	Type 'Autodesk.Revit.UI.UIApplication' is not defined.	BrowseBindings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BrowseBindings\VB.NET\BindingsBrowserForm.vb	101	Active
Error	BC30002	Type 'Autodesk.Revit.UI.UIApplication' is not defined.	BrowseBindings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BrowseBindings\VB.NET\BindingsBrowserForm.vb	111	Active
Error	BC30002	Type 'Autodesk.Revit.DB.Document' is not defined.	BrowseBindings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BrowseBindings\VB.NET\BindingsBrowserForm.vb	132	Active
Error	BC30002	Type 'Autodesk.Revit.UI.UIApplication' is not defined.	BrowseBindings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BrowseBindings\VB.NET\BindingsBrowserForm.vb	138	Active
Error	BC40056	Namespace or type specified in the Imports 'Autodesk.Revit.DB' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.	BrowseBindings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BrowseBindings\VB.NET\Command.vb	25	Active
Error	BC40056	Namespace or type specified in the Imports 'Autodesk.Revit.UI' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.	BrowseBindings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BrowseBindings\VB.NET\Command.vb	26	Active
Error	BC30002	Type 'Autodesk.Revit.Attributes.Transaction' is not defined.	BrowseBindings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BrowseBindings\VB.NET\Command.vb	28	Active
Error	BC30451	'Autodesk' is not declared. It may be inaccessible due to its protection level.	BrowseBindings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BrowseBindings\VB.NET\Command.vb	28	Active
Error	BC30002	Type 'Autodesk.Revit.Attributes.Regeneration' is not defined.	BrowseBindings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BrowseBindings\VB.NET\Command.vb	29	Active
Error	BC30451	'Autodesk' is not declared. It may be inaccessible due to its protection level.	BrowseBindings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BrowseBindings\VB.NET\Command.vb	29	Active
Error	BC30002	Type 'Autodesk.Revit.Attributes.Journaling' is not defined.	BrowseBindings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BrowseBindings\VB.NET\Command.vb	30	Active
Error	BC30451	'Autodesk' is not declared. It may be inaccessible due to its protection level.	BrowseBindings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BrowseBindings\VB.NET\Command.vb	30	Active
Error	BC30002	Type 'Autodesk.Revit.UI.IExternalCommand' is not defined.	BrowseBindings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BrowseBindings\VB.NET\Command.vb	32	Active
Error	BC30002	Type 'Autodesk.Revit.UI.ExternalCommandData' is not defined.	BrowseBindings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BrowseBindings\VB.NET\Command.vb	50	Active
Error	BC30002	Type 'Autodesk.Revit.DB.ElementSet' is not defined.	BrowseBindings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BrowseBindings\VB.NET\Command.vb	50	Active
Error	BC30002	Type 'Autodesk.Revit.UI.Result' is not defined.	BrowseBindings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BrowseBindings\VB.NET\Command.vb	50	Active
Error	BC30002	Type 'Autodesk.Revit.UI.IExternalCommand' is not defined.	BrowseBindings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BrowseBindings\VB.NET\Command.vb	50	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CancelSave	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\CancelSave\CS\CancelSave.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CancelSave	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\CancelSave\CS\CancelSave.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CancelSave	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\CancelSave\CS\CancelSave.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CancelSave	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\CancelSave\CS\CancelSave.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CancelSave	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\CancelSave\CS\CancelSave.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CancelSave	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\CancelSave\CS\CancelSave.cs	34	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CancelSave	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\CancelSave\CS\CancelSave.cs	42	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	CancelSave	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\CancelSave\CS\CancelSave.cs	42	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CancelSave	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\CancelSave\CS\CancelSave.cs	43	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	CancelSave	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\CancelSave\CS\CancelSave.cs	43	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CancelSave	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\CancelSave\CS\CancelSave.cs	44	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	CancelSave	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\CancelSave\CS\CancelSave.cs	44	Active
Error	CS0246	The type or namespace name 'IExternalApplication' could not be found (are you missing a using directive or an assembly reference?)	CancelSave	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\CancelSave\CS\CancelSave.cs	45	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CancelSave	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\CancelSave\CS\CancelSave.cs	66	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	CancelSave	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\CancelSave\CS\CancelSave.cs	66	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CancelSave	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\CancelSave\CS\CancelSave.cs	84	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	CancelSave	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\CancelSave\CS\CancelSave.cs	84	Active
Error	CS0246	The type or namespace name 'RevitAPIPostDocEventArgs' could not be found (are you missing a using directive or an assembly reference?)	CancelSave	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\CancelSave\CS\CancelSave.cs	108	Active
Error	CS0246	The type or namespace name 'RevitAPIPreDocEventArgs' could not be found (are you missing a using directive or an assembly reference?)	CancelSave	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\CancelSave\CS\CancelSave.cs	140	Active
Error	CS0246	The type or namespace name 'DocumentClosingEventArgs' could not be found (are you missing a using directive or an assembly reference?)	CancelSave	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\CancelSave\CS\CancelSave.cs	176	Active
Error	CS0246	The type or namespace name 'DocumentClosedEventArgs' could not be found (are you missing a using directive or an assembly reference?)	CancelSave	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\CancelSave\CS\CancelSave.cs	181	Active
Error	CS0246	The type or namespace name 'RevitAPIPreDocEventArgs' could not be found (are you missing a using directive or an assembly reference?)	CancelSave	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\CancelSave\CS\CancelSave.cs	195	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	CancelSave	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\CancelSave\CS\CancelSave.cs	240	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CancelSave	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\CancelSave\CS\CancelSave.cs	252	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CancelSave	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\CancelSave\CS\LogManager.cs	28	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	CancelSave	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\CancelSave\CS\LogManager.cs	96	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CapitalizeAllTextNotes	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CapitalizeAllTextNotes\CS\Command.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CapitalizeAllTextNotes	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CapitalizeAllTextNotes\CS\Command.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CapitalizeAllTextNotes	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CapitalizeAllTextNotes\CS\Command.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CapitalizeAllTextNotes	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CapitalizeAllTextNotes\CS\Command.cs	38	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	CapitalizeAllTextNotes	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CapitalizeAllTextNotes\CS\Command.cs	38	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CapitalizeAllTextNotes	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CapitalizeAllTextNotes\CS\Command.cs	39	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	CapitalizeAllTextNotes	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CapitalizeAllTextNotes\CS\Command.cs	39	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	CapitalizeAllTextNotes	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CapitalizeAllTextNotes\CS\Command.cs	40	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	CapitalizeAllTextNotes	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CapitalizeAllTextNotes\CS\Command.cs	58	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	CapitalizeAllTextNotes	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CapitalizeAllTextNotes\CS\Command.cs	58	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	CapitalizeAllTextNotes	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CapitalizeAllTextNotes\CS\Command.cs	59	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ChangesMonitor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DocumentChanged\CS\ChangesMonitor.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ChangesMonitor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DocumentChanged\CS\ChangesMonitor.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ChangesMonitor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DocumentChanged\CS\ChangesMonitor.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ChangesMonitor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DocumentChanged\CS\ChangesMonitor.cs	41	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	ChangesMonitor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DocumentChanged\CS\ChangesMonitor.cs	41	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ChangesMonitor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DocumentChanged\CS\ChangesMonitor.cs	42	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	ChangesMonitor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DocumentChanged\CS\ChangesMonitor.cs	42	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ChangesMonitor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DocumentChanged\CS\ChangesMonitor.cs	43	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	ChangesMonitor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DocumentChanged\CS\ChangesMonitor.cs	43	Active
Error	CS0246	The type or namespace name 'IExternalApplication' could not be found (are you missing a using directive or an assembly reference?)	ChangesMonitor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DocumentChanged\CS\ChangesMonitor.cs	44	Active
Error	CS0246	The type or namespace name 'ControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	ChangesMonitor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DocumentChanged\CS\ChangesMonitor.cs	53	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	ChangesMonitor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DocumentChanged\CS\ChangesMonitor.cs	99	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	ChangesMonitor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DocumentChanged\CS\ChangesMonitor.cs	99	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	ChangesMonitor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DocumentChanged\CS\ChangesMonitor.cs	127	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	ChangesMonitor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DocumentChanged\CS\ChangesMonitor.cs	127	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ChangesMonitor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DocumentChanged\CS\ChangesMonitor.cs	142	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	ChangesMonitor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DocumentChanged\CS\ChangesMonitor.cs	176	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	ChangesMonitor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DocumentChanged\CS\ChangesMonitor.cs	176	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ChangesMonitor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DocumentChanged\CS\ChangesMonitor.cs	248	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	ChangesMonitor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DocumentChanged\CS\ChangesMonitor.cs	248	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ChangesMonitor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DocumentChanged\CS\ChangesMonitor.cs	249	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	ChangesMonitor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DocumentChanged\CS\ChangesMonitor.cs	249	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	ChangesMonitor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DocumentChanged\CS\ChangesMonitor.cs	250	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	ChangesMonitor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DocumentChanged\CS\ChangesMonitor.cs	269	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	ChangesMonitor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DocumentChanged\CS\ChangesMonitor.cs	269	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	ChangesMonitor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DocumentChanged\CS\ChangesMonitor.cs	269	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CompoundStructure	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CompoundStructure\CS\Command.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CompoundStructure	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CompoundStructure\CS\Command.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CompoundStructure	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CompoundStructure\CS\Command.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CompoundStructure	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CompoundStructure\CS\Command.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CompoundStructure	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CompoundStructure\CS\Command.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CompoundStructure	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CompoundStructure\CS\Command.cs	40	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	CompoundStructure	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CompoundStructure\CS\Command.cs	40	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CompoundStructure	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CompoundStructure\CS\Command.cs	41	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	CompoundStructure	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CompoundStructure\CS\Command.cs	41	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CompoundStructure	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CompoundStructure\CS\Command.cs	42	Active
Error	CS0246	The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)	CompoundStructure	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CompoundStructure\CS\Command.cs	47	Active
Error	CS0246	The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)	CompoundStructure	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CompoundStructure\CS\Command.cs	51	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	CompoundStructure	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CompoundStructure\CS\Command.cs	69	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CompoundStructure	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CompoundStructure\CS\Command.cs	69	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	CompoundStructure	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CompoundStructure\CS\Command.cs	69	Active
Error	CS0246	The type or namespace name 'Wall' could not be found (are you missing a using directive or an assembly reference?)	CompoundStructure	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CompoundStructure\CS\Command.cs	122	Active
Error	CS0246	The type or namespace name 'WallSweepInfo' could not be found (are you missing a using directive or an assembly reference?)	CompoundStructure	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CompoundStructure\CS\Command.cs	220	Active
Error	CS0246	The type or namespace name 'Material' could not be found (are you missing a using directive or an assembly reference?)	CompoundStructure	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CompoundStructure\CS\Command.cs	234	Active
Error	CS0246	The type or namespace name 'Material' could not be found (are you missing a using directive or an assembly reference?)	CompoundStructure	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CompoundStructure\CS\Command.cs	252	Active
Error	CS0246	The type or namespace name 'Material' could not be found (are you missing a using directive or an assembly reference?)	CompoundStructure	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CompoundStructure\CS\Command.cs	310	Active
Error	CS0246	The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)	CompoundStructure	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CompoundStructure\CS\Command.cs	353	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateAirHandler	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateAirHandler\CS\Command.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateAirHandler	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateAirHandler\CS\Command.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateAirHandler	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateAirHandler\CS\Command.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateAirHandler	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateAirHandler\CS\Command.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateAirHandler	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateAirHandler\CS\Command.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateAirHandler	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateAirHandler\CS\Command.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateAirHandler	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateAirHandler\CS\Command.cs	38	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	CreateAirHandler	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateAirHandler\CS\Command.cs	38	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateAirHandler	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateAirHandler\CS\Command.cs	39	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	CreateAirHandler	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateAirHandler\CS\Command.cs	39	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateAirHandler	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateAirHandler\CS\Command.cs	40	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	CreateAirHandler	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateAirHandler\CS\Command.cs	40	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	CreateAirHandler	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateAirHandler\CS\Command.cs	41	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateAirHandler	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateAirHandler\CS\Command.cs	46	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateAirHandler	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateAirHandler\CS\Command.cs	51	Active
Error	CS0246	The type or namespace name 'FamilyItemFactory' could not be found (are you missing a using directive or an assembly reference?)	CreateAirHandler	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateAirHandler\CS\Command.cs	56	Active
Error	CS0246	The type or namespace name 'Extrusion' could not be found (are you missing a using directive or an assembly reference?)	CreateAirHandler	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateAirHandler\CS\Command.cs	61	Active
Error	CS0246	The type or namespace name 'CombinableElementArray' could not be found (are you missing a using directive or an assembly reference?)	CreateAirHandler	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateAirHandler\CS\Command.cs	66	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateAirHandler	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateAirHandler\CS\Command.cs	72	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateAirHandler	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateAirHandler\CS\Command.cs	111	Active
Error	CS0246	The type or namespace name 'Transaction' could not be found (are you missing a using directive or an assembly reference?)	CreateAirHandler	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateAirHandler\CS\Command.cs	159	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateAirHandler	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateAirHandler\CS\Command.cs	179	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	CreateAirHandler	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateAirHandler\CS\Command.cs	179	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	CreateAirHandler	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateAirHandler\CS\Command.cs	180	Active
Error	CS0246	The type or namespace name 'PlanarFace' could not be found (are you missing a using directive or an assembly reference?)	CreateAirHandler	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateAirHandler\CS\Command.cs	228	Active
Error	CS0246	The type or namespace name 'Extrusion' could not be found (are you missing a using directive or an assembly reference?)	CreateAirHandler	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateAirHandler\CS\Command.cs	228	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\BeamSystemBuilder.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\BeamSystemBuilder.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\BeamSystemData.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\BeamSystemData.cs	34	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\BeamSystemData.cs	35	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\BeamSystemData.cs	36	Active
Error	CS0246	The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\BeamSystemData.cs	48	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\BeamSystemData.cs	58	Active
Error	CS0246	The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\BeamSystemData.cs	63	Active
Error	CS0246	The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\BeamSystemData.cs	69	Active
Error	CS0246	The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\BeamSystemData.cs	85	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\BeamSystemData.cs	96	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\BeamSystemData.cs	115	Active
Error	CS0246	The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\BeamSystemData.cs	143	Active
Error	CS0246	The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\BeamSystemData.cs	221	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\BeamSystemParams.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\BeamSystemParams.cs	33	Active
Error	CS0246	The type or namespace name 'BeamSystemJustifyType' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\BeamSystemParams.cs	86	Active
Error	CS0246	The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\BeamSystemParams.cs	94	Active
Error	CS0246	The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\BeamSystemParams.cs	138	Active
Error	CS0246	The type or namespace name 'LayoutRule' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\BeamSystemParams.cs	210	Active
Error	CS0246	The type or namespace name 'LayoutRuleClearSpacing' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\BeamSystemParams.cs	221	Active
Error	CS0246	The type or namespace name 'LayoutRule' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\BeamSystemParams.cs	226	Active
Error	CS0246	The type or namespace name 'BeamSystemJustifyType' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\BeamSystemParams.cs	264	Active
Error	CS0246	The type or namespace name 'LayoutRuleFixedDistance' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\BeamSystemParams.cs	294	Active
Error	CS0246	The type or namespace name 'LayoutRule' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\BeamSystemParams.cs	299	Active
Error	CS0246	The type or namespace name 'BeamSystemJustifyType' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\BeamSystemParams.cs	348	Active
Error	CS0246	The type or namespace name 'LayoutRuleFixedNumber' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\BeamSystemParams.cs	368	Active
Error	CS0246	The type or namespace name 'LayoutRule' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\BeamSystemParams.cs	397	Active
Error	CS0246	The type or namespace name 'LayoutRuleMaximumSpacing' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\BeamSystemParams.cs	422	Active
Error	CS0246	The type or namespace name 'LayoutRule' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\BeamSystemParams.cs	451	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\BeamSystemSketch.cs	32	Active
Error	CS0246	The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\BeamSystemSketch.cs	68	Active
Error	CS0246	The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\BeamSystemSketch.cs	106	Active
Error	CS0246	The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\BeamSystemSketch.cs	133	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\BeamTypeConverter.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\BeamTypeConverter.cs	34	Active
Error	CS0246	The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\BeamTypeConverter.cs	46	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\Command.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\Command.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\Command.cs	34	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\Command.cs	39	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	CreateBeamSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\Command.cs	39	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\Command.cs	40	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	CreateBeamSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\Command.cs	40	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\Command.cs	41	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	CreateBeamSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\Command.cs	41	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\Command.cs	42	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\Command.cs	60	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\Command.cs	60	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\Command.cs	60	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\GeometryUtil.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\GeometryUtil.cs	41	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\GeometryUtil.cs	49	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\GeometryUtil.cs	49	Active
Error	CS0246	The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\GeometryUtil.cs	62	Active
Error	CS0246	The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\GeometryUtil.cs	62	Active
Error	CS0246	The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\GeometryUtil.cs	148	Active
Error	CS0246	The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\GeometryUtil.cs	169	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\Line2D.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\LineSketch.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamsColumnsBraces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\CS\CreateBeamsColumnsBraces.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamsColumnsBraces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\CS\CreateBeamsColumnsBraces.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamsColumnsBraces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\CS\CreateBeamsColumnsBraces.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamsColumnsBraces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\CS\CreateBeamsColumnsBraces.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamsColumnsBraces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\CS\CreateBeamsColumnsBraces.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamsColumnsBraces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\CS\CreateBeamsColumnsBraces.cs	34	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamsColumnsBraces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\CS\CreateBeamsColumnsBraces.cs	36	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamsColumnsBraces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\CS\CreateBeamsColumnsBraces.cs	37	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamsColumnsBraces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\CS\CreateBeamsColumnsBraces.cs	44	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	CreateBeamsColumnsBraces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\CS\CreateBeamsColumnsBraces.cs	44	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamsColumnsBraces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\CS\CreateBeamsColumnsBraces.cs	45	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	CreateBeamsColumnsBraces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\CS\CreateBeamsColumnsBraces.cs	45	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamsColumnsBraces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\CS\CreateBeamsColumnsBraces.cs	46	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	CreateBeamsColumnsBraces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\CS\CreateBeamsColumnsBraces.cs	46	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamsColumnsBraces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\CS\CreateBeamsColumnsBraces.cs	47	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamsColumnsBraces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\CS\CreateBeamsColumnsBraces.cs	49	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamsColumnsBraces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\CS\CreateBeamsColumnsBraces.cs	56	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamsColumnsBraces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\CS\CreateBeamsColumnsBraces.cs	107	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamsColumnsBraces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\CS\CreateBeamsColumnsBraces.cs	107	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamsColumnsBraces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\CS\CreateBeamsColumnsBraces.cs	107	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamsColumnsBraces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\CS\CreateBeamsColumnsBraces.cs	322	Active
Error	CS0246	The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamsColumnsBraces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\CS\CreateBeamsColumnsBraces.cs	322	Active
Error	CS0246	The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamsColumnsBraces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\CS\CreateBeamsColumnsBraces.cs	322	Active
Error	CS0246	The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamsColumnsBraces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\CS\CreateBeamsColumnsBraces.cs	322	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamsColumnsBraces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\CS\CreateBeamsColumnsBraces.cs	375	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamsColumnsBraces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\CS\CreateBeamsColumnsBraces.cs	375	Active
Error	CS0246	The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamsColumnsBraces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\CS\CreateBeamsColumnsBraces.cs	375	Active
Error	CS0246	The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamsColumnsBraces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\CS\CreateBeamsColumnsBraces.cs	375	Active
Error	CS0246	The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamsColumnsBraces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\CS\CreateBeamsColumnsBraces.cs	375	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamsColumnsBraces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\CS\CreateBeamsColumnsBraces.cs	398	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamsColumnsBraces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\CS\CreateBeamsColumnsBraces.cs	398	Active
Error	CS0246	The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamsColumnsBraces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\CS\CreateBeamsColumnsBraces.cs	398	Active
Error	CS0246	The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamsColumnsBraces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\CS\CreateBeamsColumnsBraces.cs	398	Active
Error	CS0246	The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamsColumnsBraces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\CS\CreateBeamsColumnsBraces.cs	398	Active
Error	CS0246	The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamsColumnsBraces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\CS\CreateBeamsColumnsBraces.cs	452	Active
Error	CS0246	The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamsColumnsBraces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\CS\CreateBeamsColumnsBraces.cs	465	Active
Error	CS0246	The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamsColumnsBraces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\CS\CreateBeamsColumnsBraces.cs	489	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateBeamsColumnsBraces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\CS\CreateBeamsColumnsBracesForm.cs	30	Active
Error	BC40056	Namespace or type specified in the Imports 'Autodesk.Revit' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.	CreateBeamsColumnsBraces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\VB.NET\CreateBeamsColumnsBraces.vb	28	Active
Error	BC40056	Namespace or type specified in the Imports 'Autodesk.Revit.DB.Events' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.	CreateBeamsColumnsBraces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\VB.NET\CreateBeamsColumnsBraces.vb	29	Active
Error	BC40056	Namespace or type specified in the Imports 'Autodesk.Revit.DB' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.	CreateBeamsColumnsBraces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\VB.NET\CreateBeamsColumnsBraces.vb	30	Active
Error	BC40056	Namespace or type specified in the Imports 'Autodesk.Revit.UI' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.	CreateBeamsColumnsBraces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\VB.NET\CreateBeamsColumnsBraces.vb	31	Active
Error	BC40056	Namespace or type specified in the Imports 'Autodesk.Revit.DB.Structure' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.	CreateBeamsColumnsBraces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\VB.NET\CreateBeamsColumnsBraces.vb	32	Active
Error	BC40056	Namespace or type specified in the Imports 'Autodesk.Revit.Creation' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.	CreateBeamsColumnsBraces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\VB.NET\CreateBeamsColumnsBraces.vb	33	Active
Error	BC30002	Type 'Autodesk.Revit.Attributes.Transaction' is not defined.	CreateBeamsColumnsBraces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\VB.NET\CreateBeamsColumnsBraces.vb	36	Active
Error	BC30451	'Autodesk' is not declared. It may be inaccessible due to its protection level.	CreateBeamsColumnsBraces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\VB.NET\CreateBeamsColumnsBraces.vb	36	Active
Error	BC30002	Type 'Autodesk.Revit.Attributes.Regeneration' is not defined.	CreateBeamsColumnsBraces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\VB.NET\CreateBeamsColumnsBraces.vb	37	Active
Error	BC30451	'Autodesk' is not declared. It may be inaccessible due to its protection level.	CreateBeamsColumnsBraces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\VB.NET\CreateBeamsColumnsBraces.vb	37	Active
Error	BC30002	Type 'Autodesk.Revit.Attributes.Journaling' is not defined.	CreateBeamsColumnsBraces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\VB.NET\CreateBeamsColumnsBraces.vb	38	Active
Error	BC30451	'Autodesk' is not declared. It may be inaccessible due to its protection level.	CreateBeamsColumnsBraces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\VB.NET\CreateBeamsColumnsBraces.vb	38	Active
Error	BC30002	Type 'IExternalCommand' is not defined.	CreateBeamsColumnsBraces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\VB.NET\CreateBeamsColumnsBraces.vb	40	Active
Error	BC30002	Type 'Autodesk.Revit.UI.UIApplication' is not defined.	CreateBeamsColumnsBraces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\VB.NET\CreateBeamsColumnsBraces.vb	41	Active
Error	BC30002	Type 'Autodesk.Revit.DB.UV' is not defined.	CreateBeamsColumnsBraces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\VB.NET\CreateBeamsColumnsBraces.vb	47	Active
Error	BC30002	Type 'Autodesk.Revit.UI.ExternalCommandData' is not defined.	CreateBeamsColumnsBraces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\VB.NET\CreateBeamsColumnsBraces.vb	101	Active
Error	BC30002	Type 'Autodesk.Revit.DB.ElementSet' is not defined.	CreateBeamsColumnsBraces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\VB.NET\CreateBeamsColumnsBraces.vb	101	Active
Error	BC30002	Type 'Autodesk.Revit.UI.Result' is not defined.	CreateBeamsColumnsBraces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\VB.NET\CreateBeamsColumnsBraces.vb	101	Active
Error	BC30002	Type 'Autodesk.Revit.UI.IExternalCommand' is not defined.	CreateBeamsColumnsBraces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\VB.NET\CreateBeamsColumnsBraces.vb	101	Active
Error	BC30002	Type 'Autodesk.Revit.DB.UV' is not defined.	CreateBeamsColumnsBraces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\VB.NET\CreateBeamsColumnsBraces.vb	324	Active
Error	BC30002	Type 'Autodesk.Revit.DB.FamilySymbol' is not defined.	CreateBeamsColumnsBraces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\VB.NET\CreateBeamsColumnsBraces.vb	324	Active
Error	BC30002	Type 'Autodesk.Revit.DB.Level' is not defined.	CreateBeamsColumnsBraces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\VB.NET\CreateBeamsColumnsBraces.vb	324	Active
Error	BC30002	Type 'Autodesk.Revit.DB.Level' is not defined.	CreateBeamsColumnsBraces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\VB.NET\CreateBeamsColumnsBraces.vb	324	Active
Error	BC30002	Type 'Autodesk.Revit.DB.UV' is not defined.	CreateBeamsColumnsBraces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\VB.NET\CreateBeamsColumnsBraces.vb	372	Active
Error	BC30002	Type 'Autodesk.Revit.DB.UV' is not defined.	CreateBeamsColumnsBraces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\VB.NET\CreateBeamsColumnsBraces.vb	372	Active
Error	BC30002	Type 'Autodesk.Revit.DB.Level' is not defined.	CreateBeamsColumnsBraces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\VB.NET\CreateBeamsColumnsBraces.vb	372	Active
Error	BC30002	Type 'Autodesk.Revit.DB.Level' is not defined.	CreateBeamsColumnsBraces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\VB.NET\CreateBeamsColumnsBraces.vb	372	Active
Error	BC30002	Type 'Autodesk.Revit.DB.FamilySymbol' is not defined.	CreateBeamsColumnsBraces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\VB.NET\CreateBeamsColumnsBraces.vb	372	Active
Error	BC30002	Type 'Autodesk.Revit.DB.UV' is not defined.	CreateBeamsColumnsBraces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\VB.NET\CreateBeamsColumnsBraces.vb	394	Active
Error	BC30002	Type 'Autodesk.Revit.DB.UV' is not defined.	CreateBeamsColumnsBraces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\VB.NET\CreateBeamsColumnsBraces.vb	394	Active
Error	BC30002	Type 'Autodesk.Revit.DB.Level' is not defined.	CreateBeamsColumnsBraces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\VB.NET\CreateBeamsColumnsBraces.vb	394	Active
Error	BC30002	Type 'Autodesk.Revit.DB.Level' is not defined.	CreateBeamsColumnsBraces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\VB.NET\CreateBeamsColumnsBraces.vb	394	Active
Error	BC30002	Type 'Autodesk.Revit.DB.FamilySymbol' is not defined.	CreateBeamsColumnsBraces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\VB.NET\CreateBeamsColumnsBraces.vb	394	Active
Error	BC30002	Type 'Autodesk.Revit.DB.FamilySymbol' is not defined.	CreateBeamsColumnsBraces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\VB.NET\CreateBeamsColumnsBraces.vb	441	Active
Error	BC30002	Type 'Autodesk.Revit.DB.FamilySymbol' is not defined.	CreateBeamsColumnsBraces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\VB.NET\CreateBeamsColumnsBraces.vb	455	Active
Error	BC30002	Type 'Autodesk.Revit.DB.FamilySymbol' is not defined.	CreateBeamsColumnsBraces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\VB.NET\CreateBeamsColumnsBraces.vb	470	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateComplexAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\AreaReinData.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateComplexAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\AreaReinData.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateComplexAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\AreaReinData.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateComplexAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\AreaReinData.cs	34	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateComplexAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\AreaReinData.cs	35	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	CreateComplexAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\AreaReinData.cs	43	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	CreateComplexAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\AreaReinData.cs	48	Active
Error	CS0246	The type or namespace name 'AreaReinforcement' could not be found (are you missing a using directive or an assembly reference?)	CreateComplexAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\AreaReinData.cs	74	Active
Error	CS0246	The type or namespace name 'AreaReinforcement' could not be found (are you missing a using directive or an assembly reference?)	CreateComplexAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\AreaReinData.cs	97	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateComplexAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\CreateComplexAreaRein.cs	23	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateComplexAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\CreateComplexAreaRein.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateComplexAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\CreateComplexAreaRein.cs	34	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateComplexAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\CreateComplexAreaRein.cs	35	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateComplexAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\CreateComplexAreaRein.cs	37	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateComplexAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\CreateComplexAreaRein.cs	40	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	CreateComplexAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\CreateComplexAreaRein.cs	40	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateComplexAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\CreateComplexAreaRein.cs	41	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	CreateComplexAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\CreateComplexAreaRein.cs	41	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateComplexAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\CreateComplexAreaRein.cs	42	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	CreateComplexAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\CreateComplexAreaRein.cs	42	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	CreateComplexAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\CreateComplexAreaRein.cs	43	Active
Error	CS0246	The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)	CreateComplexAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\CreateComplexAreaRein.cs	45	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	CreateComplexAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\CreateComplexAreaRein.cs	46	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateComplexAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\CreateComplexAreaRein.cs	65	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	CreateComplexAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\CreateComplexAreaRein.cs	65	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateComplexAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\CreateComplexAreaRein.cs	66	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	CreateComplexAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\CreateComplexAreaRein.cs	128	Active
Error	CS0246	The type or namespace name 'Floor' could not be found (are you missing a using directive or an assembly reference?)	CreateComplexAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\CreateComplexAreaRein.cs	139	Active
Error	CS0246	The type or namespace name 'Reference' could not be found (are you missing a using directive or an assembly reference?)	CreateComplexAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\CreateComplexAreaRein.cs	139	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	CreateComplexAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\CreateComplexAreaRein.cs	139	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateComplexAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\GeomHelper.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateComplexAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\GeomHelper.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateComplexAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\GeomHelper.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateComplexAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\GeomHelper.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateComplexAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\GeomHelper.cs	34	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	CreateComplexAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\GeomHelper.cs	43	Active
Error	CS0246	The type or namespace name 'Floor' could not be found (are you missing a using directive or an assembly reference?)	CreateComplexAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\GeomHelper.cs	60	Active
Error	CS0246	The type or namespace name 'Reference' could not be found (are you missing a using directive or an assembly reference?)	CreateComplexAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\GeomHelper.cs	60	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	CreateComplexAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\GeomHelper.cs	60	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	CreateComplexAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\GeomHelper.cs	100	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	CreateComplexAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\GeomHelper.cs	100	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateComplexAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\GeomUtil.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateComplexAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\GeomUtil.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateComplexAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\GeomUtil.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateComplexAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\GeomUtil.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateComplexAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\GeomUtil.cs	34	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateComplexAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\GeomUtil.cs	35	Active
Error	CS0246	The type or namespace name 'FaceArray' could not be found (are you missing a using directive or an assembly reference?)	CreateComplexAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\GeomUtil.cs	50	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateComplexAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\GeomUtil.cs	82	Active
Error	CS0246	The type or namespace name 'Face' could not be found (are you missing a using directive or an assembly reference?)	CreateComplexAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\GeomUtil.cs	82	Active
Error	CS0246	The type or namespace name 'Face' could not be found (are you missing a using directive or an assembly reference?)	CreateComplexAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\GeomUtil.cs	102	Active
Error	CS0246	The type or namespace name 'Face' could not be found (are you missing a using directive or an assembly reference?)	CreateComplexAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\GeomUtil.cs	123	Active
Error	CS0246	The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)	CreateComplexAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\GeomUtil.cs	123	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	CreateComplexAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\GeomUtil.cs	145	Active
Error	CS0246	The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)	CreateComplexAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\GeomUtil.cs	192	Active
Error	CS0246	The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)	CreateComplexAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\GeomUtil.cs	205	Active
Error	CS0246	The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)	CreateComplexAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\GeomUtil.cs	205	Active
Error	CS0246	The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)	CreateComplexAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\GeomUtil.cs	228	Active
Error	CS0246	The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)	CreateComplexAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\GeomUtil.cs	228	Active
Error	CS0246	The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)	CreateComplexAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\GeomUtil.cs	249	Active
Error	CS0246	The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)	CreateComplexAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\GeomUtil.cs	249	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateComplexAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\GeomUtil.cs	269	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateComplexAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\GeomUtil.cs	269	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateComplexAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\GeomUtil.cs	269	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateComplexAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\GeomUtil.cs	285	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateComplexAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\GeomUtil.cs	285	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateComplexAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\GeomUtil.cs	285	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateComplexAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\GeomUtil.cs	301	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateComplexAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\GeomUtil.cs	301	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateComplexAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\GeomUtil.cs	317	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateComplexAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\GeomUtil.cs	317	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateComplexAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\GeomUtil.cs	317	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateComplexAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\GeomUtil.cs	341	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateComplexAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\GeomUtil.cs	341	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateComplexAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\ParameterUtil.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateComplexAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\ParameterUtil.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateComplexAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\ParameterUtil.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateComplexAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\ParameterUtil.cs	34	Active
Error	CS0246	The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)	CreateComplexAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\ParameterUtil.cs	66	Active
Error	CS0246	The type or namespace name 'ParameterSet' could not be found (are you missing a using directive or an assembly reference?)	CreateComplexAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\ParameterUtil.cs	66	Active
Error	CS0246	The type or namespace name 'BuiltInParameter' could not be found (are you missing a using directive or an assembly reference?)	CreateComplexAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\ParameterUtil.cs	88	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateDimensions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateDimensions\CS\Command.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateDimensions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateDimensions\CS\Command.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateDimensions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateDimensions\CS\Command.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateDimensions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateDimensions\CS\Command.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateDimensions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateDimensions\CS\Command.cs	34	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateDimensions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateDimensions\CS\Command.cs	42	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	CreateDimensions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateDimensions\CS\Command.cs	42	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateDimensions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateDimensions\CS\Command.cs	43	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	CreateDimensions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateDimensions\CS\Command.cs	43	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateDimensions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateDimensions\CS\Command.cs	44	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	CreateDimensions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateDimensions\CS\Command.cs	44	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	CreateDimensions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateDimensions\CS\Command.cs	45	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	CreateDimensions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateDimensions\CS\Command.cs	47	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateDimensions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateDimensions\CS\Command.cs	68	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	CreateDimensions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateDimensions\CS\Command.cs	68	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateDimensions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateDimensions\CS\Command.cs	68	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateFillPattern	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateFillPattern\CS\Command.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateFillPattern	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateFillPattern\CS\Command.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateFillPattern	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateFillPattern\CS\Command.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateFillPattern	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateFillPattern\CS\Command.cs	39	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	CreateFillPattern	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateFillPattern\CS\Command.cs	39	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateFillPattern	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateFillPattern\CS\Command.cs	40	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	CreateFillPattern	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateFillPattern\CS\Command.cs	40	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateFillPattern	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateFillPattern\CS\Command.cs	41	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	CreateFillPattern	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateFillPattern\CS\Command.cs	41	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	CreateFillPattern	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateFillPattern\CS\Command.cs	42	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	CreateFillPattern	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateFillPattern\CS\Command.cs	60	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	CreateFillPattern	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateFillPattern\CS\Command.cs	60	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	CreateFillPattern	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateFillPattern\CS\Command.cs	61	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateFillPattern	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateFillPattern\CS\FillPatternForm.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateFillPattern	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateFillPattern\CS\FillPatternForm.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateFillPattern	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateFillPattern\CS\FillPatternForm.cs	34	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateFillPattern	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateFillPattern\CS\FillPatternForm.cs	36	Active
Error	CS0246	The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)	CreateFillPattern	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateFillPattern\CS\FillPatternForm.cs	48	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	CreateFillPattern	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateFillPattern\CS\FillPatternForm.cs	52	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	CreateFillPattern	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateFillPattern\CS\FillPatternForm.cs	57	Active
Error	CS0246	The type or namespace name 'FillPatternElement' could not be found (are you missing a using directive or an assembly reference?)	CreateFillPattern	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateFillPattern\CS\FillPatternForm.cs	124	Active
Error	CS0246	The type or namespace name 'FillPatternElement' could not be found (are you missing a using directive or an assembly reference?)	CreateFillPattern	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateFillPattern\CS\FillPatternForm.cs	148	Active
Error	CS0246	The type or namespace name 'FillGrid' could not be found (are you missing a using directive or an assembly reference?)	CreateFillPattern	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateFillPattern\CS\FillPatternForm.cs	192	Active
Error	CS0246	The type or namespace name 'UV' could not be found (are you missing a using directive or an assembly reference?)	CreateFillPattern	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateFillPattern\CS\FillPatternForm.cs	192	Active
Error	CS0246	The type or namespace name 'LinePatternElement' could not be found (are you missing a using directive or an assembly reference?)	CreateFillPattern	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateFillPattern\CS\FillPatternForm.cs	220	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	CreateFillPattern	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateFillPattern\CS\FillPatternForm.cs	297	Active
Error	CS0246	The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)	CreateFillPattern	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateFillPattern\CS\FillPatternForm.cs	297	Active
Error	CS0246	The type or namespace name 'Wall' could not be found (are you missing a using directive or an assembly reference?)	CreateFillPattern	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateFillPattern\CS\FillPatternForm.cs	350	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	CreateFillPattern	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateFillPattern\CS\FillPatternForm.cs	435	Active
Error	BC40056	Namespace or type specified in the Imports 'Autodesk.Revit.DB' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.	CreateShared	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateShared\VB.NET\Command1.vb	26	Active
Error	BC30002	Type 'Autodesk.Revit.Attributes.Transaction' is not defined.	CreateShared	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateShared\VB.NET\Command1.vb	28	Active
Error	BC30451	'Autodesk' is not declared. It may be inaccessible due to its protection level.	CreateShared	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateShared\VB.NET\Command1.vb	28	Active
Error	BC30002	Type 'Autodesk.Revit.Attributes.Regeneration' is not defined.	CreateShared	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateShared\VB.NET\Command1.vb	29	Active
Error	BC30451	'Autodesk' is not declared. It may be inaccessible due to its protection level.	CreateShared	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateShared\VB.NET\Command1.vb	29	Active
Error	BC30002	Type 'Autodesk.Revit.Attributes.Journaling' is not defined.	CreateShared	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateShared\VB.NET\Command1.vb	30	Active
Error	BC30451	'Autodesk' is not declared. It may be inaccessible due to its protection level.	CreateShared	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateShared\VB.NET\Command1.vb	30	Active
Error	BC30002	Type 'Autodesk.Revit.UI.IExternalCommand' is not defined.	CreateShared	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateShared\VB.NET\Command1.vb	32	Active
Error	BC30002	Type 'Autodesk.Revit.UI.ExternalCommandData' is not defined.	CreateShared	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateShared\VB.NET\Command1.vb	50	Active
Error	BC30002	Type 'Autodesk.Revit.DB.ElementSet' is not defined.	CreateShared	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateShared\VB.NET\Command1.vb	51	Active
Error	BC30002	Type 'Autodesk.Revit.UI.Result' is not defined.	CreateShared	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateShared\VB.NET\Command1.vb	51	Active
Error	BC30002	Type 'Autodesk.Revit.UI.IExternalCommand' is not defined.	CreateShared	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateShared\VB.NET\Command1.vb	52	Active
Error	BC40056	Namespace or type specified in the Imports 'Autodesk.Revit.DB' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.	CreateShared	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateShared\VB.NET\Command2.vb	25	Active
Error	BC30002	Type 'Autodesk.Revit.Attributes.Transaction' is not defined.	CreateShared	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateShared\VB.NET\Command2.vb	27	Active
Error	BC30451	'Autodesk' is not declared. It may be inaccessible due to its protection level.	CreateShared	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateShared\VB.NET\Command2.vb	27	Active
Error	BC30002	Type 'Autodesk.Revit.Attributes.Regeneration' is not defined.	CreateShared	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateShared\VB.NET\Command2.vb	28	Active
Error	BC30451	'Autodesk' is not declared. It may be inaccessible due to its protection level.	CreateShared	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateShared\VB.NET\Command2.vb	28	Active
Error	BC30002	Type 'Autodesk.Revit.Attributes.Journaling' is not defined.	CreateShared	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateShared\VB.NET\Command2.vb	29	Active
Error	BC30451	'Autodesk' is not declared. It may be inaccessible due to its protection level.	CreateShared	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateShared\VB.NET\Command2.vb	29	Active
Error	BC30002	Type 'Autodesk.Revit.UI.IExternalCommand' is not defined.	CreateShared	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateShared\VB.NET\Command2.vb	31	Active
Error	BC30002	Type 'Autodesk.Revit.UI.ExternalCommandData' is not defined.	CreateShared	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateShared\VB.NET\Command2.vb	49	Active
Error	BC30002	Type 'Autodesk.Revit.DB.ElementSet' is not defined.	CreateShared	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateShared\VB.NET\Command2.vb	50	Active
Error	BC30002	Type 'Autodesk.Revit.UI.Result' is not defined.	CreateShared	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateShared\VB.NET\Command2.vb	50	Active
Error	BC30002	Type 'Autodesk.Revit.UI.IExternalCommand' is not defined.	CreateShared	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateShared\VB.NET\Command2.vb	51	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateSimpleAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\AreaReinData.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateSimpleAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\AreaReinData.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateSimpleAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\AreaReinData.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateSimpleAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\AreaReinData.cs	34	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateSimpleAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\AreaReinData.cs	35	Active
Error	CS0246	The type or namespace name 'AreaReinforcement' could not be found (are you missing a using directive or an assembly reference?)	CreateSimpleAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\AreaReinData.cs	72	Active
Error	CS0246	The type or namespace name 'AreaReinforcement' could not be found (are you missing a using directive or an assembly reference?)	CreateSimpleAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\AreaReinData.cs	168	Active
Error	CS0246	The type or namespace name 'AreaReinforcement' could not be found (are you missing a using directive or an assembly reference?)	CreateSimpleAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\AreaReinData.cs	276	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateSimpleAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\CreateSimpleAreaRein.cs	23	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateSimpleAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\CreateSimpleAreaRein.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateSimpleAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\CreateSimpleAreaRein.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateSimpleAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\CreateSimpleAreaRein.cs	34	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateSimpleAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\CreateSimpleAreaRein.cs	36	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateSimpleAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\CreateSimpleAreaRein.cs	42	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	CreateSimpleAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\CreateSimpleAreaRein.cs	42	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateSimpleAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\CreateSimpleAreaRein.cs	43	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	CreateSimpleAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\CreateSimpleAreaRein.cs	43	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateSimpleAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\CreateSimpleAreaRein.cs	44	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	CreateSimpleAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\CreateSimpleAreaRein.cs	44	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	CreateSimpleAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\CreateSimpleAreaRein.cs	45	Active
Error	CS0246	The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)	CreateSimpleAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\CreateSimpleAreaRein.cs	47	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	CreateSimpleAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\CreateSimpleAreaRein.cs	48	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateSimpleAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\CreateSimpleAreaRein.cs	66	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	CreateSimpleAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\CreateSimpleAreaRein.cs	66	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateSimpleAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\CreateSimpleAreaRein.cs	67	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	CreateSimpleAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\CreateSimpleAreaRein.cs	103	Active
Error	CS0246	The type or namespace name 'Floor' could not be found (are you missing a using directive or an assembly reference?)	CreateSimpleAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\CreateSimpleAreaRein.cs	158	Active
Error	CS0246	The type or namespace name 'Wall' could not be found (are you missing a using directive or an assembly reference?)	CreateSimpleAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\CreateSimpleAreaRein.cs	206	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateSimpleAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\GeomHelper.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateSimpleAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\GeomHelper.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateSimpleAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\GeomHelper.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateSimpleAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\GeomHelper.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateSimpleAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\GeomHelper.cs	34	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	CreateSimpleAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\GeomHelper.cs	43	Active
Error	CS0246	The type or namespace name 'Wall' could not be found (are you missing a using directive or an assembly reference?)	CreateSimpleAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\GeomHelper.cs	60	Active
Error	CS0246	The type or namespace name 'Reference' could not be found (are you missing a using directive or an assembly reference?)	CreateSimpleAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\GeomHelper.cs	60	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	CreateSimpleAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\GeomHelper.cs	60	Active
Error	CS0246	The type or namespace name 'Floor' could not be found (are you missing a using directive or an assembly reference?)	CreateSimpleAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\GeomHelper.cs	114	Active
Error	CS0246	The type or namespace name 'Reference' could not be found (are you missing a using directive or an assembly reference?)	CreateSimpleAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\GeomHelper.cs	114	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	CreateSimpleAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\GeomHelper.cs	114	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateSimpleAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\GeomUtil.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateSimpleAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\GeomUtil.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateSimpleAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\GeomUtil.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateSimpleAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\GeomUtil.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateSimpleAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\GeomUtil.cs	34	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateSimpleAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\GeomUtil.cs	35	Active
Error	CS0246	The type or namespace name 'FaceArray' could not be found (are you missing a using directive or an assembly reference?)	CreateSimpleAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\GeomUtil.cs	49	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateSimpleAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\GeomUtil.cs	82	Active
Error	CS0246	The type or namespace name 'Face' could not be found (are you missing a using directive or an assembly reference?)	CreateSimpleAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\GeomUtil.cs	82	Active
Error	CS0246	The type or namespace name 'Face' could not be found (are you missing a using directive or an assembly reference?)	CreateSimpleAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\GeomUtil.cs	100	Active
Error	CS0246	The type or namespace name 'Face' could not be found (are you missing a using directive or an assembly reference?)	CreateSimpleAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\GeomUtil.cs	121	Active
Error	CS0246	The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)	CreateSimpleAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\GeomUtil.cs	121	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	CreateSimpleAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\GeomUtil.cs	143	Active
Error	CS0246	The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)	CreateSimpleAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\GeomUtil.cs	191	Active
Error	CS0246	The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)	CreateSimpleAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\GeomUtil.cs	191	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateSimpleAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\GeomUtil.cs	211	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateSimpleAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\GeomUtil.cs	211	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateSimpleAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\GeomUtil.cs	211	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateSimpleAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\GeomUtil.cs	227	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateSimpleAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\GeomUtil.cs	227	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateSimpleAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\GeomUtil.cs	227	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateSimpleAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\GeomUtil.cs	251	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateSimpleAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\GeomUtil.cs	251	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateSimpleAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\ParameterUtil.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateSimpleAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\ParameterUtil.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateSimpleAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\ParameterUtil.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateSimpleAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\ParameterUtil.cs	34	Active
Error	CS0246	The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)	CreateSimpleAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\ParameterUtil.cs	56	Active
Error	CS0246	The type or namespace name 'ParameterSet' could not be found (are you missing a using directive or an assembly reference?)	CreateSimpleAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\ParameterUtil.cs	56	Active
Error	CS0246	The type or namespace name 'BuiltInParameter' could not be found (are you missing a using directive or an assembly reference?)	CreateSimpleAreaRein	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\ParameterUtil.cs	78	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateTrianglesTopography	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateTrianglesTopography\CS\Command.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateTrianglesTopography	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateTrianglesTopography\CS\Command.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateTrianglesTopography	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateTrianglesTopography\CS\Command.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateTrianglesTopography	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateTrianglesTopography\CS\Command.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateTrianglesTopography	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateTrianglesTopography\CS\Command.cs	38	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	CreateTrianglesTopography	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateTrianglesTopography\CS\Command.cs	38	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateTrianglesTopography	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateTrianglesTopography\CS\Command.cs	39	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	CreateTrianglesTopography	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateTrianglesTopography\CS\Command.cs	39	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	CreateTrianglesTopography	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateTrianglesTopography\CS\Command.cs	40	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	CreateTrianglesTopography	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateTrianglesTopography\CS\Command.cs	58	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	CreateTrianglesTopography	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateTrianglesTopography\CS\Command.cs	58	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	CreateTrianglesTopography	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateTrianglesTopography\CS\Command.cs	58	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateTrianglesTopography	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateTrianglesTopography\CS\TrianglesData.cs	23	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	CreateTrianglesTopography	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateTrianglesTopography\CS\TrianglesData.cs	40	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateTruss	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateTruss\CS\CreateTruss.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateTruss	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateTruss\CS\CreateTruss.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateTruss	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateTruss\CS\CreateTruss.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateTruss	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateTruss\CS\CreateTruss.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateTruss	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateTruss\CS\CreateTruss.cs	34	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateTruss	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateTruss\CS\CreateTruss.cs	35	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateTruss	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateTruss\CS\CreateTruss.cs	43	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	CreateTruss	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateTruss\CS\CreateTruss.cs	43	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateTruss	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateTruss\CS\CreateTruss.cs	44	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	CreateTruss	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateTruss\CS\CreateTruss.cs	44	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateTruss	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateTruss\CS\CreateTruss.cs	45	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	CreateTruss	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateTruss\CS\CreateTruss.cs	45	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	CreateTruss	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateTruss\CS\CreateTruss.cs	46	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateTruss	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateTruss\CS\CreateTruss.cs	51	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateTruss	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateTruss\CS\CreateTruss.cs	56	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateTruss	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateTruss\CS\CreateTruss.cs	61	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateTruss	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateTruss\CS\CreateTruss.cs	66	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateTruss	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateTruss\CS\CreateTruss.cs	85	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateTruss	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateTruss\CS\CreateTruss.cs	85	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	CreateTruss	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateTruss\CS\CreateTruss.cs	87	Active
Error	CS0246	The type or namespace name 'ModelCurve' could not be found (are you missing a using directive or an assembly reference?)	CreateTruss	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateTruss\CS\CreateTruss.cs	249	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateTruss	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateTruss\CS\CreateTruss.cs	249	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateTruss	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateTruss\CS\CreateTruss.cs	249	Active
Error	CS0246	The type or namespace name 'SketchPlane' could not be found (are you missing a using directive or an assembly reference?)	CreateTruss	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateTruss\CS\CreateTruss.cs	249	Active
Error	CS0246	The type or namespace name 'TrussCurveType' could not be found (are you missing a using directive or an assembly reference?)	CreateTruss	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateTruss\CS\CreateTruss.cs	249	Active
Error	CS0246	The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)	CreateTruss	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateTruss\CS\CreateTruss.cs	264	Active
Error	CS0246	The type or namespace name 'ReferencePlane' could not be found (are you missing a using directive or an assembly reference?)	CreateTruss	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateTruss\CS\CreateTruss.cs	264	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateTruss	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateTruss\CS\CreateTruss.cs	285	Active
Error	CS0246	The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)	CreateTruss	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateTruss\CS\CreateTruss.cs	285	Active
Error	CS0246	The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)	CreateTruss	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateTruss\CS\CreateTruss.cs	285	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateViewSection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\Command.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateViewSection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\Command.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateViewSection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\Command.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateViewSection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\Command.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateViewSection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\Command.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateViewSection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\Command.cs	41	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	CreateViewSection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\Command.cs	41	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateViewSection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\Command.cs	42	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	CreateViewSection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\Command.cs	42	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateViewSection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\Command.cs	43	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	CreateViewSection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\Command.cs	43	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	CreateViewSection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\Command.cs	44	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateViewSection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\Command.cs	47	Active
Error	CS0246	The type or namespace name 'BoundingBoxXYZ' could not be found (are you missing a using directive or an assembly reference?)	CreateViewSection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\Command.cs	51	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateViewSection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\Command.cs	52	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateViewSection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\Command.cs	92	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	CreateViewSection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\Command.cs	92	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateViewSection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\Command.cs	93	Active
Error	CS0246	The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)	CreateViewSection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\Command.cs	254	Active
Error	CS0246	The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)	CreateViewSection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\Command.cs	283	Active
Error	CS0246	The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)	CreateViewSection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\Command.cs	321	Active
Error	CS0246	The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)	CreateViewSection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\Command.cs	376	Active
Error	CS0246	The type or namespace name 'Wall' could not be found (are you missing a using directive or an assembly reference?)	CreateViewSection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\Command.cs	420	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateViewSection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\Command.cs	438	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	CreateViewSection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\Command.cs	438	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateViewSection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\Command.cs	439	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	CreateViewSection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\Command.cs	439	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	CreateViewSection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\Command.cs	440	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateViewSection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\Command.cs	442	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	CreateViewSection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\Command.cs	443	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	CreateViewSection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\Command.cs	445	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateViewSection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\XYZMath.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateViewSection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\XYZMath.cs	49	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateViewSection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\XYZMath.cs	49	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateViewSection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\XYZMath.cs	49	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateViewSection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\XYZMath.cs	64	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateViewSection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\XYZMath.cs	64	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateViewSection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\XYZMath.cs	78	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateViewSection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\XYZMath.cs	78	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateViewSection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\XYZMath.cs	78	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateViewSection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\XYZMath.cs	94	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateViewSection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\XYZMath.cs	94	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateViewSection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\XYZMath.cs	114	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateViewSection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\XYZMath.cs	114	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateViewSection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\XYZMath.cs	130	Active
Error	CS0246	The type or namespace name 'CurveArray' could not be found (are you missing a using directive or an assembly reference?)	CreateViewSection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\XYZMath.cs	130	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateViewSection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\XYZMath.cs	192	Active
Error	CS0246	The type or namespace name 'CurveArray' could not be found (are you missing a using directive or an assembly reference?)	CreateViewSection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\XYZMath.cs	192	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateViewSection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\XYZMath.cs	219	Active
Error	CS0246	The type or namespace name 'CurveArray' could not be found (are you missing a using directive or an assembly reference?)	CreateViewSection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\XYZMath.cs	219	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateWallinBeamProfile	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateWallinBeamProfile\CS\CreateWallinBeamProfile.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateWallinBeamProfile	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateWallinBeamProfile\CS\CreateWallinBeamProfile.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateWallinBeamProfile	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateWallinBeamProfile\CS\CreateWallinBeamProfile.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateWallinBeamProfile	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateWallinBeamProfile\CS\CreateWallinBeamProfile.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateWallinBeamProfile	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateWallinBeamProfile\CS\CreateWallinBeamProfile.cs	34	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateWallinBeamProfile	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateWallinBeamProfile\CS\CreateWallinBeamProfile.cs	41	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	CreateWallinBeamProfile	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateWallinBeamProfile\CS\CreateWallinBeamProfile.cs	41	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateWallinBeamProfile	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateWallinBeamProfile\CS\CreateWallinBeamProfile.cs	42	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	CreateWallinBeamProfile	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateWallinBeamProfile\CS\CreateWallinBeamProfile.cs	42	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateWallinBeamProfile	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateWallinBeamProfile\CS\CreateWallinBeamProfile.cs	43	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	CreateWallinBeamProfile	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateWallinBeamProfile\CS\CreateWallinBeamProfile.cs	43	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	CreateWallinBeamProfile	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateWallinBeamProfile\CS\CreateWallinBeamProfile.cs	44	Active
Error	CS0246	The type or namespace name 'WallType' could not be found (are you missing a using directive or an assembly reference?)	CreateWallinBeamProfile	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateWallinBeamProfile\CS\CreateWallinBeamProfile.cs	47	Active
Error	CS0246	The type or namespace name 'WallType' could not be found (are you missing a using directive or an assembly reference?)	CreateWallinBeamProfile	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateWallinBeamProfile\CS\CreateWallinBeamProfile.cs	50	Active
Error	CS0246	The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)	CreateWallinBeamProfile	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateWallinBeamProfile\CS\CreateWallinBeamProfile.cs	51	Active
Error	CS0246	The type or namespace name 'WallType' could not be found (are you missing a using directive or an assembly reference?)	CreateWallinBeamProfile	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateWallinBeamProfile\CS\CreateWallinBeamProfile.cs	61	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateWallinBeamProfile	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateWallinBeamProfile\CS\CreateWallinBeamProfile.cs	123	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	CreateWallinBeamProfile	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateWallinBeamProfile\CS\CreateWallinBeamProfile.cs	123	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateWallinBeamProfile	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateWallinBeamProfile\CS\CreateWallinBeamProfile.cs	124	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateWallinBeamProfile	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateWallinBeamProfile\CS\CreateWallinBeamProfile.cs	169	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateWallinBeamProfile	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateWallinBeamProfile\CS\CreateWallinBeamProfile.cs	262	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateWallinBeamProfile	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateWallinBeamProfile\CS\CreateWallinBeamProfile.cs	336	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateWallinBeamProfile	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateWallinBeamProfile\CS\CreateWallinBeamProfile.cs	336	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateWallsUnderBeams	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateWallsUnderBeams\CS\CreateWallsUnderBeams.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateWallsUnderBeams	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateWallsUnderBeams\CS\CreateWallsUnderBeams.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateWallsUnderBeams	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateWallsUnderBeams\CS\CreateWallsUnderBeams.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateWallsUnderBeams	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateWallsUnderBeams\CS\CreateWallsUnderBeams.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateWallsUnderBeams	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateWallsUnderBeams\CS\CreateWallsUnderBeams.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateWallsUnderBeams	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateWallsUnderBeams\CS\CreateWallsUnderBeams.cs	40	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	CreateWallsUnderBeams	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateWallsUnderBeams\CS\CreateWallsUnderBeams.cs	40	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateWallsUnderBeams	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateWallsUnderBeams\CS\CreateWallsUnderBeams.cs	41	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	CreateWallsUnderBeams	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateWallsUnderBeams\CS\CreateWallsUnderBeams.cs	41	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateWallsUnderBeams	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateWallsUnderBeams\CS\CreateWallsUnderBeams.cs	42	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	CreateWallsUnderBeams	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateWallsUnderBeams\CS\CreateWallsUnderBeams.cs	42	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	CreateWallsUnderBeams	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateWallsUnderBeams\CS\CreateWallsUnderBeams.cs	43	Active
Error	CS0246	The type or namespace name 'WallType' could not be found (are you missing a using directive or an assembly reference?)	CreateWallsUnderBeams	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateWallsUnderBeams\CS\CreateWallsUnderBeams.cs	46	Active
Error	CS0246	The type or namespace name 'WallType' could not be found (are you missing a using directive or an assembly reference?)	CreateWallsUnderBeams	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateWallsUnderBeams\CS\CreateWallsUnderBeams.cs	48	Active
Error	CS0246	The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)	CreateWallsUnderBeams	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateWallsUnderBeams\CS\CreateWallsUnderBeams.cs	49	Active
Error	CS0246	The type or namespace name 'WallType' could not be found (are you missing a using directive or an assembly reference?)	CreateWallsUnderBeams	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateWallsUnderBeams\CS\CreateWallsUnderBeams.cs	58	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateWallsUnderBeams	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateWallsUnderBeams\CS\CreateWallsUnderBeams.cs	120	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	CreateWallsUnderBeams	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateWallsUnderBeams\CS\CreateWallsUnderBeams.cs	120	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateWallsUnderBeams	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateWallsUnderBeams\CS\CreateWallsUnderBeams.cs	121	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CreateWallsUnderBeams	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateWallsUnderBeams\CS\CreateWallsUnderBeams.cs	188	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CurtainSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\Command.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CurtainSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\Command.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CurtainSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\Command.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CurtainSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\Command.cs	37	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	CurtainSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\Command.cs	37	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CurtainSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\Command.cs	38	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	CurtainSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\Command.cs	38	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CurtainSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\Command.cs	39	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	CurtainSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\Command.cs	39	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	CurtainSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\Command.cs	40	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CurtainSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\Command.cs	59	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	CurtainSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\Command.cs	59	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CurtainSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\Command.cs	59	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CurtainSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\CurtainSystem\MassChecker.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CurtainSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\CurtainSystem\MassChecker.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CurtainSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\CurtainSystem\MassChecker.cs	29	Active
Error	CS0246	The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)	CurtainSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\CurtainSystem\MassChecker.cs	89	Active
Error	CS0246	The type or namespace name 'FaceArray' could not be found (are you missing a using directive or an assembly reference?)	CurtainSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\CurtainSystem\MassChecker.cs	120	Active
Error	CS0246	The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)	CurtainSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\CurtainSystem\MassChecker.cs	222	Active
Error	CS0246	The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)	CurtainSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\CurtainSystem\MassChecker.cs	222	Active
Error	CS0246	The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)	CurtainSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\CurtainSystem\MassChecker.cs	285	Active
Error	CS0246	The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)	CurtainSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\CurtainSystem\MassChecker.cs	285	Active
Error	CS0246	The type or namespace name 'FaceArray' could not be found (are you missing a using directive or an assembly reference?)	CurtainSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\CurtainSystem\MassChecker.cs	305	Active
Error	CS0246	The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)	CurtainSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\CurtainSystem\MassChecker.cs	305	Active
Error	CS0246	The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)	CurtainSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\CurtainSystem\MassChecker.cs	352	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CurtainSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\CurtainSystem\SystemData.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CurtainSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\CurtainSystem\SystemData.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CurtainSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\CurtainSystem\SystemData.cs	236	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CurtainSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\CurtainSystem\SystemData.cs	240	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CurtainSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\Data\MyDocument.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CurtainSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\Data\MyDocument.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CurtainSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\Data\MyDocument.cs	32	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	CurtainSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\Data\MyDocument.cs	42	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	CurtainSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\Data\MyDocument.cs	46	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CurtainSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\Data\MyDocument.cs	59	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CurtainSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\Data\MyDocument.cs	64	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CurtainSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\Data\MyDocument.cs	72	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CurtainSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\Data\MyDocument.cs	73	Active
Error	CS0246	The type or namespace name 'FaceArray' could not be found (are you missing a using directive or an assembly reference?)	CurtainSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\Data\MyDocument.cs	96	Active
Error	CS0246	The type or namespace name 'FaceArray' could not be found (are you missing a using directive or an assembly reference?)	CurtainSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\Data\MyDocument.cs	100	Active
Error	CS0246	The type or namespace name 'CurtainSystemType' could not be found (are you missing a using directive or an assembly reference?)	CurtainSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\Data\MyDocument.cs	113	Active
Error	CS0246	The type or namespace name 'CurtainSystemType' could not be found (are you missing a using directive or an assembly reference?)	CurtainSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\Data\MyDocument.cs	117	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	CurtainSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\Data\MyDocument.cs	199	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CurtainSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\UI\CurtainForm.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CurtainSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\UI\CurtainForm.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CurtainSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\Utility\MathTools.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CurtainSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\Utility\MathTools.cs	116	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\Command.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\Command.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\Command.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\Command.cs	36	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\Command.cs	36	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\Command.cs	37	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\Command.cs	37	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\Command.cs	38	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\Command.cs	38	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\Command.cs	39	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\Command.cs	61	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\Command.cs	61	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\Command.cs	61	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\GridCoordinates.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\GridCoordinates.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\GridDrawing.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\GridDrawing.cs	31	Active
Error	CS0246	The type or namespace name 'CurtainGridLine' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\GridDrawing.cs	1080	Active
Error	CS0246	The type or namespace name 'CurveArray' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\GridDrawing.cs	1115	Active
Error	CS0246	The type or namespace name 'CurveArray' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\GridDrawing.cs	1192	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\GridForm.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\GridForm.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\GridGeometry.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\GridGeometry.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\GridGeometry.cs	33	Active
Error	CS0246	The type or namespace name 'CurtainGrid' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\GridGeometry.cs	47	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\GridGeometry.cs	53	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\GridGeometry.cs	56	Active
Error	CS0246	The type or namespace name 'MullionType' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\GridGeometry.cs	59	Active
Error	CS0246	The type or namespace name 'CurtainGridLine' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\GridGeometry.cs	62	Active
Error	CS0246	The type or namespace name 'CurtainGridLine' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\GridGeometry.cs	65	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\GridGeometry.cs	68	Active
Error	CS0246	The type or namespace name 'CurtainGridLine' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\GridGeometry.cs	74	Active
Error	CS0246	The type or namespace name 'CurtainGrid' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\GridGeometry.cs	84	Active
Error	CS0246	The type or namespace name 'MullionType' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\GridGeometry.cs	106	Active
Error	CS0246	The type or namespace name 'CurtainGridLine' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\GridGeometry.cs	121	Active
Error	CS0246	The type or namespace name 'CurtainGridLine' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\GridGeometry.cs	132	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\GridGeometry.cs	143	Active
Error	CS0246	The type or namespace name 'CurtainGridLine' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\GridGeometry.cs	162	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\GridGeometry.cs	1034	Active
Error	CS0246	The type or namespace name 'CurtainCell' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\GridGeometry.cs	1034	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\GridGeometry.cs	1074	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\GridGeometry.cs	1074	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\GridGeometry.cs	1074	Active
Error	CS0246	The type or namespace name 'CurtainCell' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\GridGeometry.cs	1128	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\GridGeometry.cs	1128	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\GridGeometry.cs	1128	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\GridProperties.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\GridProperties.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\MathTools.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\MathTools.cs	119	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\MyDocument.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\MyDocument.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\MyDocument.cs	34	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\MyDocument.cs	45	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\MyDocument.cs	49	Active
Error	CS0246	The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\MyDocument.cs	58	Active
Error	CS0246	The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\MyDocument.cs	62	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\MyDocument.cs	71	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\MyDocument.cs	75	Active
Error	CS0246	The type or namespace name 'WallType' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\MyDocument.cs	84	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\MyDocument.cs	87	Active
Error	CS0246	The type or namespace name 'Wall' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\MyDocument.cs	93	Active
Error	CS0246	The type or namespace name 'ForgeTypeId' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\MyDocument.cs	105	Active
Error	CS0246	The type or namespace name 'WallType' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\MyDocument.cs	116	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\MyDocument.cs	127	Active
Error	CS0246	The type or namespace name 'Wall' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\MyDocument.cs	149	Active
Error	CS0246	The type or namespace name 'ForgeTypeId' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\MyDocument.cs	202	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\MyDocument.cs	243	Active
Error	CS0246	The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\MyDocument.cs	330	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\MyDocument.cs	349	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\Unit.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\Unit.cs	30	Active
Error	CS0246	The type or namespace name 'ForgeTypeId' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\Unit.cs	52	Active
Error	CS0246	The type or namespace name 'ForgeTypeId' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\Unit.cs	69	Active
Error	CS0246	The type or namespace name 'ForgeTypeId' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\Unit.cs	83	Active
Error	CS0246	The type or namespace name 'ForgeTypeId' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\Unit.cs	96	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\Utility.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\Utility.cs	29	Active
Error	CS0246	The type or namespace name 'WallType' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\Utility.cs	36	Active
Error	CS0246	The type or namespace name 'WallType' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\Utility.cs	52	Active
Error	CS0246	The type or namespace name 'WallType' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\Utility.cs	52	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\Utility.cs	67	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\Utility.cs	83	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\Utility.cs	83	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\WallGeometry.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\WallGeometry.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\WallGeometry.cs	47	Active
Error	CS0246	The type or namespace name 'WallType' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\WallGeometry.cs	50	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\WallGeometry.cs	56	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\WallGeometry.cs	62	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\WallGeometry.cs	91	Active
Error	CS0246	The type or namespace name 'WallType' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\WallGeometry.cs	106	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\WallGeometry.cs	136	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\WallGeometry.cs	166	Active
Error	CS0246	The type or namespace name 'Wall' could not be found (are you missing a using directive or an assembly reference?)	CurtainWallGrid	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\WallGeometry.cs	200	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CurvedBeam	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurvedBeam\CS\CurvedBeam.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CurvedBeam	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurvedBeam\CS\CurvedBeam.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CurvedBeam	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurvedBeam\CS\CurvedBeam.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CurvedBeam	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurvedBeam\CS\CurvedBeam.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CurvedBeam	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurvedBeam\CS\CurvedBeam.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CurvedBeam	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurvedBeam\CS\CurvedBeam.cs	40	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	CurvedBeam	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurvedBeam\CS\CurvedBeam.cs	40	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CurvedBeam	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurvedBeam\CS\CurvedBeam.cs	41	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	CurvedBeam	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurvedBeam\CS\CurvedBeam.cs	41	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CurvedBeam	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurvedBeam\CS\CurvedBeam.cs	42	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	CurvedBeam	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurvedBeam\CS\CurvedBeam.cs	42	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	CurvedBeam	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurvedBeam\CS\CurvedBeam.cs	43	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CurvedBeam	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurvedBeam\CS\CurvedBeam.cs	46	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CurvedBeam	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurvedBeam\CS\CurvedBeam.cs	94	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	CurvedBeam	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurvedBeam\CS\CurvedBeam.cs	94	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CurvedBeam	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurvedBeam\CS\CurvedBeam.cs	94	Active
Error	CS0246	The type or namespace name 'Arc' could not be found (are you missing a using directive or an assembly reference?)	CurvedBeam	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurvedBeam\CS\CurvedBeam.cs	185	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	CurvedBeam	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurvedBeam\CS\CurvedBeam.cs	200	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	CurvedBeam	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurvedBeam\CS\CurvedBeam.cs	218	Active
Error	CS0246	The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)	CurvedBeam	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurvedBeam\CS\CurvedBeam.cs	256	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	CurvedBeam	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurvedBeam\CS\CurvedBeam.cs	256	Active
Error	CS0246	The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)	CurvedBeam	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurvedBeam\CS\CurvedBeam.cs	256	Active
Error	CS0246	The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)	CurvedBeam	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurvedBeam\CS\CurvedBeam.cs	296	Active
Error	CS0246	The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)	CurvedBeam	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurvedBeam\CS\CurvedBeam.cs	313	Active
Error	CS0246	The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)	CurvedBeam	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurvedBeam\CS\CurvedBeam.cs	340	Active
Error	CS0246	The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)	CurvedBeam	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurvedBeam\CS\CurvedBeam.cs	357	Active
Error	CS0246	The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)	CurvedBeam	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurvedBeam\CS\CurvedBeam.cs	375	Active
Error	CS0246	The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)	CurvedBeam	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurvedBeam\CS\CurvedBeam.cs	398	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CurvedBeam	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurvedBeam\CS\CurvedBeamForm.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	CurvedBeam	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurvedBeam\CS\CurvedBeamForm.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Custom2DExporter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\Command.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Custom2DExporter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\Command.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Custom2DExporter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\Command.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Custom2DExporter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\Command.cs	38	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	Custom2DExporter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\Command.cs	38	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Custom2DExporter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\Command.cs	39	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	Custom2DExporter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\Command.cs	39	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Custom2DExporter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\Command.cs	40	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	Custom2DExporter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\Command.cs	40	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	Custom2DExporter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\Command.cs	41	Active
Error	CS0246	The type or namespace name 'ViewType' could not be found (are you missing a using directive or an assembly reference?)	Custom2DExporter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\Command.cs	48	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Custom2DExporter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\Command.cs	62	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Custom2DExporter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\Command.cs	74	Active
Error	CS0246	The type or namespace name 'DisplayStyle' could not be found (are you missing a using directive or an assembly reference?)	Custom2DExporter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\Command.cs	75	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	Custom2DExporter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\Command.cs	79	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	Custom2DExporter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\Command.cs	151	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	Custom2DExporter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\Command.cs	151	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	Custom2DExporter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\Command.cs	152	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Custom2DExporter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\TessellatedGeomAndText2DExportContext.cs	7	Active
Error	CS0246	The type or namespace name 'IExportContext2D' could not be found (are you missing a using directive or an assembly reference?)	Custom2DExporter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\TessellatedGeomAndText2DExportContext.cs	25	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	Custom2DExporter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\TessellatedGeomAndText2DExportContext.cs	31	Active
Error	CS0246	The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)	Custom2DExporter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\TessellatedGeomAndText2DExportContext.cs	44	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	Custom2DExporter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\TessellatedGeomAndText2DExportContext.cs	72	Active
Error	CS0246	The type or namespace name 'RenderNodeAction' could not be found (are you missing a using directive or an assembly reference?)	Custom2DExporter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\TessellatedGeomAndText2DExportContext.cs	91	Active
Error	CS0246	The type or namespace name 'ViewNode' could not be found (are you missing a using directive or an assembly reference?)	Custom2DExporter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\TessellatedGeomAndText2DExportContext.cs	91	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	Custom2DExporter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\TessellatedGeomAndText2DExportContext.cs	96	Active
Error	CS0246	The type or namespace name 'RenderNodeAction' could not be found (are you missing a using directive or an assembly reference?)	Custom2DExporter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\TessellatedGeomAndText2DExportContext.cs	100	Active
Error	CS0246	The type or namespace name 'InstanceNode' could not be found (are you missing a using directive or an assembly reference?)	Custom2DExporter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\TessellatedGeomAndText2DExportContext.cs	100	Active
Error	CS0246	The type or namespace name 'InstanceNode' could not be found (are you missing a using directive or an assembly reference?)	Custom2DExporter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\TessellatedGeomAndText2DExportContext.cs	105	Active
Error	CS0246	The type or namespace name 'RenderNodeAction' could not be found (are you missing a using directive or an assembly reference?)	Custom2DExporter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\TessellatedGeomAndText2DExportContext.cs	109	Active
Error	CS0246	The type or namespace name 'LinkNode' could not be found (are you missing a using directive or an assembly reference?)	Custom2DExporter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\TessellatedGeomAndText2DExportContext.cs	109	Active
Error	CS0246	The type or namespace name 'LinkNode' could not be found (are you missing a using directive or an assembly reference?)	Custom2DExporter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\TessellatedGeomAndText2DExportContext.cs	114	Active
Error	CS0246	The type or namespace name 'RenderNodeAction' could not be found (are you missing a using directive or an assembly reference?)	Custom2DExporter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\TessellatedGeomAndText2DExportContext.cs	118	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	Custom2DExporter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\TessellatedGeomAndText2DExportContext.cs	118	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	Custom2DExporter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\TessellatedGeomAndText2DExportContext.cs	123	Active
Error	CS0246	The type or namespace name 'RenderNodeAction' could not be found (are you missing a using directive or an assembly reference?)	Custom2DExporter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\TessellatedGeomAndText2DExportContext.cs	127	Active
Error	CS0246	The type or namespace name 'ElementNode' could not be found (are you missing a using directive or an assembly reference?)	Custom2DExporter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\TessellatedGeomAndText2DExportContext.cs	127	Active
Error	CS0246	The type or namespace name 'ElementNode' could not be found (are you missing a using directive or an assembly reference?)	Custom2DExporter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\TessellatedGeomAndText2DExportContext.cs	136	Active
Error	CS0246	The type or namespace name 'RenderNodeAction' could not be found (are you missing a using directive or an assembly reference?)	Custom2DExporter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\TessellatedGeomAndText2DExportContext.cs	142	Active
Error	CS0246	The type or namespace name 'FaceNode' could not be found (are you missing a using directive or an assembly reference?)	Custom2DExporter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\TessellatedGeomAndText2DExportContext.cs	142	Active
Error	CS0246	The type or namespace name 'FaceNode' could not be found (are you missing a using directive or an assembly reference?)	Custom2DExporter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\TessellatedGeomAndText2DExportContext.cs	147	Active
Error	CS0246	The type or namespace name 'RenderNodeAction' could not be found (are you missing a using directive or an assembly reference?)	Custom2DExporter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\TessellatedGeomAndText2DExportContext.cs	151	Active
Error	CS0246	The type or namespace name 'CurveNode' could not be found (are you missing a using directive or an assembly reference?)	Custom2DExporter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\TessellatedGeomAndText2DExportContext.cs	151	Active
Error	CS0246	The type or namespace name 'RenderNodeAction' could not be found (are you missing a using directive or an assembly reference?)	Custom2DExporter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\TessellatedGeomAndText2DExportContext.cs	176	Active
Error	CS0246	The type or namespace name 'PolylineNode' could not be found (are you missing a using directive or an assembly reference?)	Custom2DExporter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\TessellatedGeomAndText2DExportContext.cs	176	Active
Error	CS0246	The type or namespace name 'RenderNodeAction' could not be found (are you missing a using directive or an assembly reference?)	Custom2DExporter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\TessellatedGeomAndText2DExportContext.cs	189	Active
Error	CS0246	The type or namespace name 'FaceEdgeNode' could not be found (are you missing a using directive or an assembly reference?)	Custom2DExporter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\TessellatedGeomAndText2DExportContext.cs	189	Active
Error	CS0246	The type or namespace name 'RenderNodeAction' could not be found (are you missing a using directive or an assembly reference?)	Custom2DExporter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\TessellatedGeomAndText2DExportContext.cs	205	Active
Error	CS0246	The type or namespace name 'FaceSilhouetteNode' could not be found (are you missing a using directive or an assembly reference?)	Custom2DExporter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\TessellatedGeomAndText2DExportContext.cs	205	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Custom2DExporter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\TessellatedGeomAndText2DExportContext.cs	210	Active
Error	CS0246	The type or namespace name 'LightNode' could not be found (are you missing a using directive or an assembly reference?)	Custom2DExporter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\TessellatedGeomAndText2DExportContext.cs	216	Active
Error	CS0246	The type or namespace name 'RPCNode' could not be found (are you missing a using directive or an assembly reference?)	Custom2DExporter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\TessellatedGeomAndText2DExportContext.cs	220	Active
Error	CS0246	The type or namespace name 'MaterialNode' could not be found (are you missing a using directive or an assembly reference?)	Custom2DExporter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\TessellatedGeomAndText2DExportContext.cs	224	Active
Error	CS0246	The type or namespace name 'PolymeshTopology' could not be found (are you missing a using directive or an assembly reference?)	Custom2DExporter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\TessellatedGeomAndText2DExportContext.cs	228	Active
Error	CS0246	The type or namespace name 'LineSegment' could not be found (are you missing a using directive or an assembly reference?)	Custom2DExporter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\TessellatedGeomAndText2DExportContext.cs	232	Active
Error	CS0246	The type or namespace name 'PolylineSegments' could not be found (are you missing a using directive or an assembly reference?)	Custom2DExporter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\TessellatedGeomAndText2DExportContext.cs	243	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Custom2DExporter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\Utilities.cs	3	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	Custom2DExporter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\Utilities.cs	17	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	Custom2DExporter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\Utilities.cs	17	Active
Error	CS0246	The type or namespace name 'Plane' could not be found (are you missing a using directive or an assembly reference?)	Custom2DExporter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\Utilities.cs	32	Active
Error	CS0246	The type or namespace name 'View' could not be found (are you missing a using directive or an assembly reference?)	Custom2DExporter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\Utilities.cs	32	Active
Error	CS0246	The type or namespace name 'View' could not be found (are you missing a using directive or an assembly reference?)	Custom2DExporter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\Utilities.cs	45	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	Custom2DExporter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\Utilities.cs	45	Active
Error	CS0246	The type or namespace name 'View' could not be found (are you missing a using directive or an assembly reference?)	Custom2DExporter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\Utilities.cs	80	Active
Error	CS0246	The type or namespace name 'View' could not be found (are you missing a using directive or an assembly reference?)	Custom2DExporter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\Utilities.cs	100	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	Custom2DExporter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\Utilities.cs	100	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DWGFamilyCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\DWGFamilyCreation\CS\Command.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DWGFamilyCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\DWGFamilyCreation\CS\Command.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DWGFamilyCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\DWGFamilyCreation\CS\Command.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DWGFamilyCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\DWGFamilyCreation\CS\Command.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DWGFamilyCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\DWGFamilyCreation\CS\Command.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DWGFamilyCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\DWGFamilyCreation\CS\Command.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DWGFamilyCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\DWGFamilyCreation\CS\Command.cs	41	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	DWGFamilyCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\DWGFamilyCreation\CS\Command.cs	41	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DWGFamilyCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\DWGFamilyCreation\CS\Command.cs	42	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	DWGFamilyCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\DWGFamilyCreation\CS\Command.cs	42	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DWGFamilyCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\DWGFamilyCreation\CS\Command.cs	43	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	DWGFamilyCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\DWGFamilyCreation\CS\Command.cs	43	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	DWGFamilyCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\DWGFamilyCreation\CS\Command.cs	44	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DWGFamilyCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\DWGFamilyCreation\CS\Command.cs	49	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	DWGFamilyCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\DWGFamilyCreation\CS\Command.cs	53	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DWGFamilyCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\DWGFamilyCreation\CS\Command.cs	71	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	DWGFamilyCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\DWGFamilyCreation\CS\Command.cs	71	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DWGFamilyCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\DWGFamilyCreation\CS\Command.cs	72	Active
Error	CS0246	The type or namespace name 'View' could not be found (are you missing a using directive or an assembly reference?)	DWGFamilyCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\DWGFamilyCreation\CS\Command.cs	151	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DatumsModification	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationApp.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DatumsModification	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationApp.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DatumsModification	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationApp.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DatumsModification	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationApp.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DatumsModification	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationApp.cs	34	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DatumsModification	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationApp.cs	41	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	DatumsModification	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationApp.cs	41	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DatumsModification	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationApp.cs	42	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	DatumsModification	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationApp.cs	42	Active
Error	CS0246	The type or namespace name 'IExternalApplication' could not be found (are you missing a using directive or an assembly reference?)	DatumsModification	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationApp.cs	43	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	DatumsModification	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationApp.cs	54	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	DatumsModification	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationApp.cs	54	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	DatumsModification	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationApp.cs	64	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	DatumsModification	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationApp.cs	64	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DatumsModification	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationCmd.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DatumsModification	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationCmd.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DatumsModification	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationCmd.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DatumsModification	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationCmd.cs	38	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	DatumsModification	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationCmd.cs	38	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DatumsModification	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationCmd.cs	39	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	DatumsModification	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationCmd.cs	39	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	DatumsModification	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationCmd.cs	40	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	DatumsModification	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationCmd.cs	85	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	DatumsModification	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationCmd.cs	85	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	DatumsModification	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationCmd.cs	86	Active
Error	CS0246	The type or namespace name 'Leader' could not be found (are you missing a using directive or an assembly reference?)	DatumsModification	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationCmd.cs	154	Active
Error	CS0246	The type or namespace name 'Leader' could not be found (are you missing a using directive or an assembly reference?)	DatumsModification	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationCmd.cs	154	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DatumsModification	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationCmd.cs	174	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	DatumsModification	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationCmd.cs	174	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DatumsModification	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationCmd.cs	175	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	DatumsModification	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationCmd.cs	175	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	DatumsModification	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationCmd.cs	176	Active
Error	CS0246	The type or namespace name 'DatumPlane' could not be found (are you missing a using directive or an assembly reference?)	DatumsModification	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationCmd.cs	182	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	DatumsModification	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationCmd.cs	201	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	DatumsModification	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationCmd.cs	201	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	DatumsModification	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationCmd.cs	202	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	DatumsModification	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationCmd.cs	257	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	DatumsModification	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationCmd.cs	257	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	DatumsModification	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationCmd.cs	257	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	DatumsModification	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationCmd.cs	257	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DatumsModification	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationCmd.cs	284	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	DatumsModification	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationCmd.cs	284	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DatumsModification	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationCmd.cs	285	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	DatumsModification	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationCmd.cs	285	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	DatumsModification	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationCmd.cs	286	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	DatumsModification	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationCmd.cs	292	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	DatumsModification	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationCmd.cs	311	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	DatumsModification	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationCmd.cs	311	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	DatumsModification	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationCmd.cs	312	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DeckProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeckProperties\CS\Command.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DeckProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeckProperties\CS\Command.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DeckProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeckProperties\CS\Command.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DeckProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeckProperties\CS\Command.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DeckProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeckProperties\CS\Command.cs	38	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	DeckProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeckProperties\CS\Command.cs	38	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DeckProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeckProperties\CS\Command.cs	39	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	DeckProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeckProperties\CS\Command.cs	39	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DeckProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeckProperties\CS\Command.cs	40	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	DeckProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeckProperties\CS\Command.cs	40	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	DeckProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeckProperties\CS\Command.cs	41	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	DeckProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeckProperties\CS\Command.cs	44	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DeckProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeckProperties\CS\Command.cs	62	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DeckProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeckProperties\CS\Command.cs	62	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	DeckProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeckProperties\CS\Command.cs	64	Active
Error	CS0246	The type or namespace name 'Floor' could not be found (are you missing a using directive or an assembly reference?)	DeckProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeckProperties\CS\Command.cs	122	Active
Error	CS0246	The type or namespace name 'CompoundStructureLayer' could not be found (are you missing a using directive or an assembly reference?)	DeckProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeckProperties\CS\Command.cs	150	Active
Error	CS0246	The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)	DeckProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeckProperties\CS\Command.cs	183	Active
Error	CS0246	The type or namespace name 'CompoundStructureLayer' could not be found (are you missing a using directive or an assembly reference?)	DeckProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeckProperties\CS\Command.cs	213	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DeleteDimensions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeleteDimensions\CS\DeleteDimesions.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DeleteDimensions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeleteDimensions\CS\DeleteDimesions.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DeleteDimensions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeleteDimensions\CS\DeleteDimesions.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DeleteDimensions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeleteDimensions\CS\DeleteDimesions.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DeleteDimensions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeleteDimensions\CS\DeleteDimesions.cs	39	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	DeleteDimensions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeleteDimensions\CS\DeleteDimesions.cs	39	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DeleteDimensions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeleteDimensions\CS\DeleteDimesions.cs	40	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	DeleteDimensions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeleteDimensions\CS\DeleteDimesions.cs	40	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DeleteDimensions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeleteDimensions\CS\DeleteDimesions.cs	41	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	DeleteDimensions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeleteDimensions\CS\DeleteDimesions.cs	41	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	DeleteDimensions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeleteDimensions\CS\DeleteDimesions.cs	42	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DeleteDimensions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeleteDimensions\CS\DeleteDimesions.cs	60	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	DeleteDimensions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeleteDimensions\CS\DeleteDimesions.cs	60	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DeleteDimensions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeleteDimensions\CS\DeleteDimesions.cs	61	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DeleteObject	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeleteObject\CS\DeleteObject.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DeleteObject	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeleteObject\CS\DeleteObject.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DeleteObject	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeleteObject\CS\DeleteObject.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DeleteObject	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeleteObject\CS\DeleteObject.cs	35	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	DeleteObject	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeleteObject\CS\DeleteObject.cs	35	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DeleteObject	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeleteObject\CS\DeleteObject.cs	36	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	DeleteObject	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeleteObject\CS\DeleteObject.cs	36	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DeleteObject	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeleteObject\CS\DeleteObject.cs	37	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	DeleteObject	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeleteObject\CS\DeleteObject.cs	37	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DeleteObject	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeleteObject\CS\DeleteObject.cs	38	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DeleteObject	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeleteObject\CS\DeleteObject.cs	56	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DeleteObject	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeleteObject\CS\DeleteObject.cs	57	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DeleteObject	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeleteObject\CS\DeleteObject.cs	58	Active
Error	BC40056	Namespace or type specified in the Imports 'Autodesk.Revit.DB' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.	DeleteObject	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeleteObject\VB.NET\DeleteObject.vb	26	Active
Error	BC30002	Type 'Autodesk.Revit.Attributes.Transaction' is not defined.	DeleteObject	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeleteObject\VB.NET\DeleteObject.vb	32	Active
Error	BC30451	'Autodesk' is not declared. It may be inaccessible due to its protection level.	DeleteObject	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeleteObject\VB.NET\DeleteObject.vb	32	Active
Error	BC30002	Type 'Autodesk.Revit.Attributes.Regeneration' is not defined.	DeleteObject	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeleteObject\VB.NET\DeleteObject.vb	33	Active
Error	BC30451	'Autodesk' is not declared. It may be inaccessible due to its protection level.	DeleteObject	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeleteObject\VB.NET\DeleteObject.vb	33	Active
Error	BC30002	Type 'Autodesk.Revit.Attributes.Journaling' is not defined.	DeleteObject	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeleteObject\VB.NET\DeleteObject.vb	34	Active
Error	BC30451	'Autodesk' is not declared. It may be inaccessible due to its protection level.	DeleteObject	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeleteObject\VB.NET\DeleteObject.vb	34	Active
Error	BC30002	Type 'Autodesk.Revit.UI.IExternalCommand' is not defined.	DeleteObject	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeleteObject\VB.NET\DeleteObject.vb	36	Active
Error	BC30002	Type 'Autodesk.Revit.UI.ExternalCommandData' is not defined.	DeleteObject	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeleteObject\VB.NET\DeleteObject.vb	54	Active
Error	BC30002	Type 'Autodesk.Revit.DB.ElementSet' is not defined.	DeleteObject	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeleteObject\VB.NET\DeleteObject.vb	55	Active
Error	BC30002	Type 'Autodesk.Revit.UI.Result' is not defined.	DeleteObject	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeleteObject\VB.NET\DeleteObject.vb	56	Active
Error	BC30002	Type 'Autodesk.Revit.UI.IExternalCommand' is not defined.	DeleteObject	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeleteObject\VB.NET\DeleteObject.vb	57	Active
Error	BC40056	Namespace or type specified in the Imports 'Autodesk' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.	DesignOptionReader	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DesignOptionReader\VB.NET\Command.vb	22	Active
Error	BC40056	Namespace or type specified in the Imports 'Autodesk.Revit.DB' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.	DesignOptionReader	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DesignOptionReader\VB.NET\Command.vb	23	Active
Error	BC30002	Type 'Autodesk.Revit.Attributes.Transaction' is not defined.	DesignOptionReader	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DesignOptionReader\VB.NET\Command.vb	25	Active
Error	BC30451	'Autodesk' is not declared. It may be inaccessible due to its protection level.	DesignOptionReader	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DesignOptionReader\VB.NET\Command.vb	25	Active
Error	BC30002	Type 'Autodesk.Revit.Attributes.Regeneration' is not defined.	DesignOptionReader	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DesignOptionReader\VB.NET\Command.vb	26	Active
Error	BC30451	'Autodesk' is not declared. It may be inaccessible due to its protection level.	DesignOptionReader	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DesignOptionReader\VB.NET\Command.vb	26	Active
Error	BC30002	Type 'Autodesk.Revit.Attributes.Journaling' is not defined.	DesignOptionReader	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DesignOptionReader\VB.NET\Command.vb	27	Active
Error	BC30451	'Autodesk' is not declared. It may be inaccessible due to its protection level.	DesignOptionReader	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DesignOptionReader\VB.NET\Command.vb	27	Active
Error	BC30002	Type 'Autodesk.Revit.UI.IExternalCommand' is not defined.	DesignOptionReader	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DesignOptionReader\VB.NET\Command.vb	30	Active
Error	BC30002	Type 'Autodesk.Revit.UI.ExternalCommandData' is not defined.	DesignOptionReader	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DesignOptionReader\VB.NET\Command.vb	48	Active
Error	BC30002	Type 'Autodesk.Revit.DB.ElementSet' is not defined.	DesignOptionReader	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DesignOptionReader\VB.NET\Command.vb	49	Active
Error	BC30002	Type 'Autodesk.Revit.UI.Result' is not defined.	DesignOptionReader	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DesignOptionReader\VB.NET\Command.vb	50	Active
Error	BC30002	Type 'Autodesk.Revit.UI.IExternalCommand' is not defined.	DesignOptionReader	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DesignOptionReader\VB.NET\Command.vb	50	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DimensionLeaderEnd	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DimensionLeaderEnd\CS\Command.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DimensionLeaderEnd	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DimensionLeaderEnd\CS\Command.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DimensionLeaderEnd	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DimensionLeaderEnd\CS\Command.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DimensionLeaderEnd	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DimensionLeaderEnd\CS\Command.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DimensionLeaderEnd	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DimensionLeaderEnd\CS\Command.cs	39	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	DimensionLeaderEnd	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DimensionLeaderEnd\CS\Command.cs	39	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DimensionLeaderEnd	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DimensionLeaderEnd\CS\Command.cs	40	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	DimensionLeaderEnd	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DimensionLeaderEnd\CS\Command.cs	40	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	DimensionLeaderEnd	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DimensionLeaderEnd\CS\Command.cs	41	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	DimensionLeaderEnd	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DimensionLeaderEnd\CS\Command.cs	60	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	DimensionLeaderEnd	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DimensionLeaderEnd\CS\Command.cs	60	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	DimensionLeaderEnd	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DimensionLeaderEnd\CS\Command.cs	61	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	DimensionLeaderEnd	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DimensionLeaderEnd\CS\Command.cs	122	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	DimensionLeaderEnd	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DimensionLeaderEnd\CS\Command.cs	122	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	DimensionLeaderEnd	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DimensionLeaderEnd\CS\Command.cs	122	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DimensionLeaderEnd	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DimensionLeaderEnd\CS\Command.cs	134	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	DimensionLeaderEnd	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DimensionLeaderEnd\CS\Command.cs	134	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DimensionLeaderEnd	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DimensionLeaderEnd\CS\Command.cs	135	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	DimensionLeaderEnd	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DimensionLeaderEnd\CS\Command.cs	135	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	DimensionLeaderEnd	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DimensionLeaderEnd\CS\Command.cs	136	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	DimensionLeaderEnd	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DimensionLeaderEnd\CS\Command.cs	154	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	DimensionLeaderEnd	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DimensionLeaderEnd\CS\Command.cs	154	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	DimensionLeaderEnd	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DimensionLeaderEnd\CS\Command.cs	155	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DirectionCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\Commands.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DirectionCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\Commands.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DirectionCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\Commands.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DirectionCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\Commands.cs	35	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	DirectionCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\Commands.cs	35	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DirectionCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\Commands.cs	36	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	DirectionCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\Commands.cs	36	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DirectionCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\Commands.cs	37	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	DirectionCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\Commands.cs	37	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	DirectionCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\Commands.cs	38	Active
Error	CS0246	The type or namespace name 'AddInId' could not be found (are you missing a using directive or an assembly reference?)	DirectionCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\Commands.cs	40	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	DirectionCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\Commands.cs	57	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	DirectionCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\Commands.cs	57	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	DirectionCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\Commands.cs	59	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DirectionCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\Commands.cs	75	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	DirectionCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\Commands.cs	75	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DirectionCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\Commands.cs	76	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	DirectionCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\Commands.cs	76	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	DirectionCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\Commands.cs	77	Active
Error	CS0246	The type or namespace name 'AddInId' could not be found (are you missing a using directive or an assembly reference?)	DirectionCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\Commands.cs	79	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	DirectionCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\Commands.cs	96	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	DirectionCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\Commands.cs	96	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	DirectionCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\Commands.cs	98	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DirectionCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\Commands.cs	113	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	DirectionCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\Commands.cs	113	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DirectionCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\Commands.cs	114	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	DirectionCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\Commands.cs	114	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	DirectionCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\Commands.cs	116	Active
Error	CS0246	The type or namespace name 'AddInId' could not be found (are you missing a using directive or an assembly reference?)	DirectionCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\Commands.cs	118	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	DirectionCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\Commands.cs	135	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	DirectionCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\Commands.cs	135	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	DirectionCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\Commands.cs	137	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DirectionCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\Commands.cs	153	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	DirectionCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\Commands.cs	153	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DirectionCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\Commands.cs	154	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	DirectionCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\Commands.cs	154	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	DirectionCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\Commands.cs	155	Active
Error	CS0246	The type or namespace name 'AddInId' could not be found (are you missing a using directive or an assembly reference?)	DirectionCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\Commands.cs	157	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	DirectionCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\Commands.cs	174	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	DirectionCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\Commands.cs	174	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	DirectionCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\Commands.cs	176	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DirectionCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\FindSouthFacing.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DirectionCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\FindSouthFacing.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DirectionCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\FindSouthFacing.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DirectionCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\FindSouthFacing.cs	37	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	DirectionCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\FindSouthFacing.cs	49	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	DirectionCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\FindSouthFacing.cs	68	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	DirectionCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\FindSouthFacing.cs	80	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	DirectionCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\FindSouthFacing.cs	80	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	DirectionCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\FindSouthFacing.cs	111	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	DirectionCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\FindSouthFacing.cs	126	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DirectionCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\FindSouthFacing.cs	141	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	DirectionCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\FindSouthFacing.cs	142	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DirectionCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\FindSouthFacingWalls.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DirectionCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\FindSouthFacingWalls.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DirectionCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\FindSouthFacingWalls.cs	37	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	DirectionCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\FindSouthFacingWalls.cs	37	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DirectionCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\FindSouthFacingWalls.cs	38	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	DirectionCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\FindSouthFacingWalls.cs	38	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DirectionCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\FindSouthFacingWalls.cs	39	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	DirectionCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\FindSouthFacingWalls.cs	39	Active
Error	CS0246	The type or namespace name 'Wall' could not be found (are you missing a using directive or an assembly reference?)	DirectionCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\FindSouthFacingWalls.cs	84	Active
Error	CS0246	The type or namespace name 'ElementType' could not be found (are you missing a using directive or an assembly reference?)	DirectionCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\FindSouthFacingWalls.cs	100	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	DirectionCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\FindSouthFacingWalls.cs	114	Active
Error	CS0246	The type or namespace name 'Wall' could not be found (are you missing a using directive or an assembly reference?)	DirectionCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\FindSouthFacingWalls.cs	114	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DirectionCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\FindSouthFacingWindows.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DirectionCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\FindSouthFacingWindows.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DirectionCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\FindSouthFacingWindows.cs	30	Active
Error	CS0246	The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)	DirectionCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\FindSouthFacingWindows.cs	79	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	DirectionCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\FindSouthFacingWindows.cs	100	Active
Error	CS0246	The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)	DirectionCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\FindSouthFacingWindows.cs	100	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	DirectionCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\FindSouthFacingWindows.cs	141	Active
Error	CS0246	The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)	DirectionCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\FindSouthFacingWindows.cs	141	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DisableCommand	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisableCommand\CS\Application.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DisableCommand	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisableCommand\CS\Application.cs	30	Active
Error	CS0246	The type or namespace name 'IExternalApplication' could not be found (are you missing a using directive or an assembly reference?)	DisableCommand	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisableCommand\CS\Application.cs	37	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	DisableCommand	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisableCommand\CS\Application.cs	46	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	DisableCommand	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisableCommand\CS\Application.cs	46	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	DisableCommand	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisableCommand\CS\Application.cs	83	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	DisableCommand	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisableCommand\CS\Application.cs	83	Active
Error	CS0246	The type or namespace name 'ExecutedEventArgs' could not be found (are you missing a using directive or an assembly reference?)	DisableCommand	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisableCommand\CS\Application.cs	98	Active
Error	CS0246	The type or namespace name 'RevitCommandId' could not be found (are you missing a using directive or an assembly reference?)	DisableCommand	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisableCommand\CS\Application.cs	130	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DisplacementElementAnimation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\Application.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DisplacementElementAnimation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\Application.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DisplacementElementAnimation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\Application.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DisplacementElementAnimation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\Application.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DisplacementElementAnimation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\Application.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DisplacementElementAnimation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\Application.cs	42	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	DisplacementElementAnimation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\Application.cs	42	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DisplacementElementAnimation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\Application.cs	43	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	DisplacementElementAnimation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\Application.cs	43	Active
Error	CS0246	The type or namespace name 'IExternalApplication' could not be found (are you missing a using directive or an assembly reference?)	DisplacementElementAnimation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\Application.cs	44	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	DisplacementElementAnimation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\Application.cs	52	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	DisplacementElementAnimation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\Application.cs	52	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	DisplacementElementAnimation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\Application.cs	62	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	DisplacementElementAnimation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\Application.cs	62	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	DisplacementElementAnimation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\Application.cs	74	Active
Error	CS0246	The type or namespace name 'PushButton' could not be found (are you missing a using directive or an assembly reference?)	DisplacementElementAnimation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\Application.cs	90	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DisplacementElementAnimation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\DisplacementStructureModelAnimator.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DisplacementElementAnimation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\DisplacementStructureModelAnimator.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DisplacementElementAnimation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\DisplacementStructureModelAnimator.cs	30	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	DisplacementElementAnimation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\DisplacementStructureModelAnimator.cs	172	Active
Error	CS0246	The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)	DisplacementElementAnimation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\DisplacementStructureModelAnimator.cs	173	Active
Error	CS0246	The type or namespace name 'BuiltInCategory' could not be found (are you missing a using directive or an assembly reference?)	DisplacementElementAnimation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\DisplacementStructureModelAnimator.cs	173	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	DisplacementElementAnimation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\DisplacementStructureModelAnimator.cs	192	Active
Error	CS0246	The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)	DisplacementElementAnimation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\DisplacementStructureModelAnimator.cs	193	Active
Error	CS0246	The type or namespace name 'BuiltInCategory' could not be found (are you missing a using directive or an assembly reference?)	DisplacementElementAnimation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\DisplacementStructureModelAnimator.cs	193	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	DisplacementElementAnimation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\DisplacementStructureModelAnimator.cs	218	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	DisplacementElementAnimation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\DisplacementStructureModelAnimator.cs	218	Active
Error	CS0246	The type or namespace name 'View' could not be found (are you missing a using directive or an assembly reference?)	DisplacementElementAnimation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\DisplacementStructureModelAnimator.cs	218	Active
Error	CS0246	The type or namespace name 'DisplacementElement' could not be found (are you missing a using directive or an assembly reference?)	DisplacementElementAnimation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\DisplacementStructureModelAnimator.cs	282	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	DisplacementElementAnimation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\DisplacementStructureModelAnimator.cs	292	Active
Error	CS0246	The type or namespace name 'DisplacementElement' could not be found (are you missing a using directive or an assembly reference?)	DisplacementElementAnimation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\DisplacementStructureModelAnimator.cs	292	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	DisplacementElementAnimation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\DisplacementStructureModelAnimator.cs	315	Active
Error	CS0246	The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)	DisplacementElementAnimation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\DisplacementStructureModelAnimator.cs	315	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	DisplacementElementAnimation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\DisplacementStructureModelAnimator.cs	315	Active
Error	CS0246	The type or namespace name 'IdlingEventArgs' could not be found (are you missing a using directive or an assembly reference?)	DisplacementElementAnimation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\DisplacementStructureModelAnimator.cs	360	Active
Error	CS0246	The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)	DisplacementElementAnimation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\DisplacementStructureModelAnimator.cs	377	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	DisplacementElementAnimation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\DisplacementStructureModelAnimator.cs	388	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	DisplacementElementAnimation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\DisplacementStructureModelAnimator.cs	388	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	DisplacementElementAnimation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\DisplacementStructureModelAnimator.cs	399	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	DisplacementElementAnimation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\DisplacementStructureModelAnimator.cs	399	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	DisplacementElementAnimation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\DisplacementStructureModelAnimator.cs	409	Active
Error	CS0246	The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)	DisplacementElementAnimation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\DisplacementStructureModelAnimator.cs	409	Active
Error	CS0246	The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)	DisplacementElementAnimation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\DisplacementStructureModelAnimator.cs	428	Active
Error	CS0246	The type or namespace name 'DisplacementElement' could not be found (are you missing a using directive or an assembly reference?)	DisplacementElementAnimation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\DisplacementStructureModelAnimator.cs	433	Active
Error	CS0246	The type or namespace name 'DisplacementElement' could not be found (are you missing a using directive or an assembly reference?)	DisplacementElementAnimation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\DisplacementStructureModelAnimator.cs	439	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	DisplacementElementAnimation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\DisplacementStructureModelAnimator.cs	484	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DisplacementElementAnimation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\DisplacementStructureModelAnimatorCommand.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DisplacementElementAnimation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\DisplacementStructureModelAnimatorCommand.cs	34	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	DisplacementElementAnimation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\DisplacementStructureModelAnimatorCommand.cs	34	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	DisplacementElementAnimation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\DisplacementStructureModelAnimatorCommand.cs	35	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	DisplacementElementAnimation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\DisplacementStructureModelAnimatorCommand.cs	39	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	DisplacementElementAnimation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\DisplacementStructureModelAnimatorCommand.cs	39	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DisplacementElementAnimation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\DisplacementStructureModelAnimatorCommand.cs	39	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DisplacementElementAnimation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\DisplacementStructureModelAnimatorCommand.cs	52	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	DisplacementElementAnimation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\DisplacementStructureModelAnimatorCommand.cs	52	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	DisplacementElementAnimation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\DisplacementStructureModelAnimatorCommand.cs	53	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	DisplacementElementAnimation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\DisplacementStructureModelAnimatorCommand.cs	59	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	DisplacementElementAnimation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\DisplacementStructureModelAnimatorCommand.cs	59	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DisplacementElementAnimation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\DisplacementStructureModelAnimatorCommand.cs	59	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DistanceToPanels	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\DistanceToPanels\CS\Command.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DistanceToPanels	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\DistanceToPanels\CS\Command.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DistanceToPanels	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\DistanceToPanels\CS\Command.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DistanceToPanels	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\DistanceToPanels\CS\Command.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DistanceToPanels	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\DistanceToPanels\CS\Command.cs	38	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	DistanceToPanels	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\DistanceToPanels\CS\Command.cs	38	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DistanceToPanels	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\DistanceToPanels\CS\Command.cs	39	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	DistanceToPanels	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\DistanceToPanels\CS\Command.cs	39	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DistanceToPanels	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\DistanceToPanels\CS\Command.cs	40	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	DistanceToPanels	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\DistanceToPanels\CS\Command.cs	40	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	DistanceToPanels	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\DistanceToPanels\CS\Command.cs	41	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DistanceToPanels	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\DistanceToPanels\CS\Command.cs	46	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DistanceToPanels	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\DistanceToPanels\CS\Command.cs	50	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DistanceToPanels	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\DistanceToPanels\CS\Command.cs	68	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	DistanceToPanels	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\DistanceToPanels\CS\Command.cs	68	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DistanceToPanels	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\DistanceToPanels\CS\Command.cs	68	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DistanceToPanels	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\DistanceToPanels\CS\Command.cs	138	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	DistanceToPanels	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\DistanceToPanels\CS\Command.cs	138	Active
Error	CS0246	The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)	DistanceToPanels	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\DistanceToPanels\CS\Command.cs	161	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DistanceToSurfaces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\DistanceToSurfaces\CS\Command.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DistanceToSurfaces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\DistanceToSurfaces\CS\Command.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DistanceToSurfaces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\DistanceToSurfaces\CS\Command.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DistanceToSurfaces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\DistanceToSurfaces\CS\Command.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DistanceToSurfaces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\DistanceToSurfaces\CS\Command.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DistanceToSurfaces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\DistanceToSurfaces\CS\Command.cs	35	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	DistanceToSurfaces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\DistanceToSurfaces\CS\Command.cs	35	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DistanceToSurfaces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\DistanceToSurfaces\CS\Command.cs	36	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	DistanceToSurfaces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\DistanceToSurfaces\CS\Command.cs	36	Active
Error	CS0246	The type or namespace name 'IExternalApplication' could not be found (are you missing a using directive or an assembly reference?)	DistanceToSurfaces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\DistanceToSurfaces\CS\Command.cs	37	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	DistanceToSurfaces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\DistanceToSurfaces\CS\Command.cs	39	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	DistanceToSurfaces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\DistanceToSurfaces\CS\Command.cs	39	Active
Error	CS0246	The type or namespace name 'DocumentOpenedEventArgs' could not be found (are you missing a using directive or an assembly reference?)	DistanceToSurfaces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\DistanceToSurfaces\CS\Command.cs	45	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	DistanceToSurfaces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\DistanceToSurfaces\CS\Command.cs	84	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	DistanceToSurfaces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\DistanceToSurfaces\CS\Command.cs	84	Active
Error	CS0246	The type or namespace name 'IUpdater' could not be found (are you missing a using directive or an assembly reference?)	DistanceToSurfaces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\DistanceToSurfaces\CS\Command.cs	87	Active
Error	CS0246	The type or namespace name 'AddInId' could not be found (are you missing a using directive or an assembly reference?)	DistanceToSurfaces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\DistanceToSurfaces\CS\Command.cs	89	Active
Error	CS0246	The type or namespace name 'UpdaterId' could not be found (are you missing a using directive or an assembly reference?)	DistanceToSurfaces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\DistanceToSurfaces\CS\Command.cs	90	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	DistanceToSurfaces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\DistanceToSurfaces\CS\Command.cs	91	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	DistanceToSurfaces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\DistanceToSurfaces\CS\Command.cs	92	Active
Error	CS0246	The type or namespace name 'AddInId' could not be found (are you missing a using directive or an assembly reference?)	DistanceToSurfaces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\DistanceToSurfaces\CS\Command.cs	93	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	DistanceToSurfaces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\DistanceToSurfaces\CS\Command.cs	93	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	DistanceToSurfaces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\DistanceToSurfaces\CS\Command.cs	93	Active
Error	CS0246	The type or namespace name 'UpdaterData' could not be found (are you missing a using directive or an assembly reference?)	DistanceToSurfaces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\DistanceToSurfaces\CS\Command.cs	100	Active
Error	CS0246	The type or namespace name 'ChangePriority' could not be found (are you missing a using directive or an assembly reference?)	DistanceToSurfaces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\DistanceToSurfaces\CS\Command.cs	161	Active
Error	CS0246	The type or namespace name 'UpdaterId' could not be found (are you missing a using directive or an assembly reference?)	DistanceToSurfaces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\DistanceToSurfaces\CS\Command.cs	162	Active
Error	CS0246	The type or namespace name 'FaceArray' could not be found (are you missing a using directive or an assembly reference?)	DistanceToSurfaces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\DistanceToSurfaces\CS\Command.cs	165	Active
Error	CS0246	The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)	DistanceToSurfaces	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\DistanceToSurfaces\CS\Command.cs	165	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DividedSurfaceByIntersects	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\DividedSurfaceByIntersects\CS\Command.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DividedSurfaceByIntersects	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\DividedSurfaceByIntersects\CS\Command.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DividedSurfaceByIntersects	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\DividedSurfaceByIntersects\CS\Command.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DividedSurfaceByIntersects	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\DividedSurfaceByIntersects\CS\Command.cs	30	Active
Error	CS0246	The type or namespace name 'TransactionAttribute' could not be found (are you missing a using directive or an assembly reference?)	DividedSurfaceByIntersects	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\DividedSurfaceByIntersects\CS\Command.cs	37	Active
Error	CS0246	The type or namespace name 'Transaction' could not be found (are you missing a using directive or an assembly reference?)	DividedSurfaceByIntersects	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\DividedSurfaceByIntersects\CS\Command.cs	37	Active
Error	CS0103	The name 'TransactionMode' does not exist in the current context	DividedSurfaceByIntersects	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\DividedSurfaceByIntersects\CS\Command.cs	37	Active
Error	CS0246	The type or namespace name 'RegenerationAttribute' could not be found (are you missing a using directive or an assembly reference?)	DividedSurfaceByIntersects	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\DividedSurfaceByIntersects\CS\Command.cs	38	Active
Error	CS0246	The type or namespace name 'Regeneration' could not be found (are you missing a using directive or an assembly reference?)	DividedSurfaceByIntersects	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\DividedSurfaceByIntersects\CS\Command.cs	38	Active
Error	CS0103	The name 'RegenerationOption' does not exist in the current context	DividedSurfaceByIntersects	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\DividedSurfaceByIntersects\CS\Command.cs	38	Active
Error	CS0246	The type or namespace name 'JournalingAttribute' could not be found (are you missing a using directive or an assembly reference?)	DividedSurfaceByIntersects	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\DividedSurfaceByIntersects\CS\Command.cs	39	Active
Error	CS0246	The type or namespace name 'Journaling' could not be found (are you missing a using directive or an assembly reference?)	DividedSurfaceByIntersects	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\DividedSurfaceByIntersects\CS\Command.cs	39	Active
Error	CS0103	The name 'JournalingMode' does not exist in the current context	DividedSurfaceByIntersects	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\DividedSurfaceByIntersects\CS\Command.cs	39	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	DividedSurfaceByIntersects	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\DividedSurfaceByIntersects\CS\Command.cs	40	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	DividedSurfaceByIntersects	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\DividedSurfaceByIntersects\CS\Command.cs	45	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DividedSurfaceByIntersects	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\DividedSurfaceByIntersects\CS\Command.cs	63	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	DividedSurfaceByIntersects	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\DividedSurfaceByIntersects\CS\Command.cs	63	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DividedSurfaceByIntersects	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\DividedSurfaceByIntersects\CS\Command.cs	63	Active
Error	CS0246	The type or namespace name 'DividedSurface' could not be found (are you missing a using directive or an assembly reference?)	DividedSurfaceByIntersects	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\DividedSurfaceByIntersects\CS\Command.cs	119	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	DividedSurfaceByIntersects	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\DividedSurfaceByIntersects\CS\Command.cs	124	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	DividedSurfaceByIntersects	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\DividedSurfaceByIntersects\CS\Command.cs	132	Active
Error	CS0246	The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)	DividedSurfaceByIntersects	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\DividedSurfaceByIntersects\CS\Command.cs	149	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DockableDialogs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\APIUtility\APIUtility.cs	42	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DockableDialogs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\APIUtility\APIUtility.cs	43	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DockableDialogs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\APIUtility\APIUtility.cs	46	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DockableDialogs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\APIUtility\APIUtility.cs	47	Active
Error	CS0246	The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)	DockableDialogs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\APIUtility\APIUtility.cs	60	Active
Error	CS0246	The type or namespace name 'DockablePaneId' could not be found (are you missing a using directive or an assembly reference?)	DockableDialogs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\APIUtility\APIUtility.cs	92	Active
Error	CS0246	The type or namespace name 'DockablePane' could not be found (are you missing a using directive or an assembly reference?)	DockableDialogs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\APIUtility\APIUtility.cs	109	Active
Error	CS0246	The type or namespace name 'DockablePaneState' could not be found (are you missing a using directive or an assembly reference?)	DockableDialogs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\APIUtility\APIUtility.cs	119	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DockableDialogs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\APIUtility\APIUtility.cs	133	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DockableDialogs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\APIUtility\APIUtilityCommandParser.cs	42	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DockableDialogs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\APIUtility\APIUtilityCommandParser.cs	43	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DockableDialogs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\APIUtility\APIUtilityCommandParser.cs	46	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DockableDialogs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\APIUtility\APIUtilityCommandParser.cs	47	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DockableDialogs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\Application\ThisApplication.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DockableDialogs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\Application\ThisApplication.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DockableDialogs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\Application\ThisApplication.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DockableDialogs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\Application\ThisApplication.cs	41	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	DockableDialogs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\Application\ThisApplication.cs	41	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DockableDialogs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\Application\ThisApplication.cs	42	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	DockableDialogs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\Application\ThisApplication.cs	42	Active
Error	CS0246	The type or namespace name 'IExternalApplication' could not be found (are you missing a using directive or an assembly reference?)	DockableDialogs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\Application\ThisApplication.cs	43	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	DockableDialogs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\Application\ThisApplication.cs	49	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	DockableDialogs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\Application\ThisApplication.cs	49	Active
Error	CS0246	The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)	DockableDialogs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\Application\ThisApplication.cs	57	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	DockableDialogs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\Application\ThisApplication.cs	66	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	DockableDialogs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\Application\ThisApplication.cs	75	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	DockableDialogs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\Application\ThisApplication.cs	75	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DockableDialogs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\Application\ThisApplication.cs	117	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DockableDialogs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\Application\ThisApplication.cs	159	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DockableDialogs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\DockingSetupDialog\DockingSetupDialog.xaml.cs	111	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DockableDialogs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\DockingSetupDialog\DockingSetupDialog.xaml.cs	170	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DockableDialogs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\ExternalEvents\APIExternalEventHandler.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DockableDialogs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\ExternalEvents\APIExternalEventHandler.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DockableDialogs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\ExternalEvents\APIExternalEventHandler.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DockableDialogs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\ExternalEvents\APIExternalEventHandler.cs	30	Active
Error	CS0246	The type or namespace name 'IExternalEventHandler' could not be found (are you missing a using directive or an assembly reference?)	DockableDialogs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\ExternalEvents\APIExternalEventHandler.cs	37	Active
Error	CS0246	The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)	DockableDialogs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\ExternalEvents\APIExternalEventHandler.cs	42	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DockableDialogs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\MainPage\MainPage.xaml.cs	42	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DockableDialogs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\MainPage\MainPage.xaml.cs	48	Active
Error	CS0246	The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)	DockableDialogs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\MainPage\MainPage.xaml.cs	57	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DockableDialogs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\MainPage\MainPage.xaml.cs	131	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DockableDialogs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\MainPage\MainPage.xaml.cs	132	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DockableDialogs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\MainPage\MainPage.xaml.cs	143	Active
Error	CS0246	The type or namespace name 'DockPosition' could not be found (are you missing a using directive or an assembly reference?)	DockableDialogs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\MainPage\MainPage.xaml.cs	202	Active
Error	CS0246	The type or namespace name 'DockPosition' could not be found (are you missing a using directive or an assembly reference?)	DockableDialogs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\MainPage\MainPage.xaml.cs	214	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DockableDialogs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\TopLevelCommands\ExternalCommandHidePage.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DockableDialogs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\TopLevelCommands\ExternalCommandHidePage.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DockableDialogs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\TopLevelCommands\ExternalCommandHidePage.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DockableDialogs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\TopLevelCommands\ExternalCommandHidePage.cs	33	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	DockableDialogs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\TopLevelCommands\ExternalCommandHidePage.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DockableDialogs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\TopLevelCommands\ExternalCommandHidePage.cs	34	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	DockableDialogs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\TopLevelCommands\ExternalCommandHidePage.cs	34	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	DockableDialogs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\TopLevelCommands\ExternalCommandHidePage.cs	35	Active
Error	CS0246	The type or namespace name 'IExternalCommandAvailability' could not be found (are you missing a using directive or an assembly reference?)	DockableDialogs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\TopLevelCommands\ExternalCommandHidePage.cs	35	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	DockableDialogs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\TopLevelCommands\ExternalCommandHidePage.cs	37	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	DockableDialogs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\TopLevelCommands\ExternalCommandHidePage.cs	37	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	DockableDialogs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\TopLevelCommands\ExternalCommandHidePage.cs	38	Active
Error	CS0246	The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)	DockableDialogs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\TopLevelCommands\ExternalCommandHidePage.cs	56	Active
Error	CS0246	The type or namespace name 'CategorySet' could not be found (are you missing a using directive or an assembly reference?)	DockableDialogs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\TopLevelCommands\ExternalCommandHidePage.cs	56	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DockableDialogs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\TopLevelCommands\ExternalCommandRegisterPage.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DockableDialogs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\TopLevelCommands\ExternalCommandRegisterPage.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DockableDialogs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\TopLevelCommands\ExternalCommandRegisterPage.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DockableDialogs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\TopLevelCommands\ExternalCommandRegisterPage.cs	33	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	DockableDialogs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\TopLevelCommands\ExternalCommandRegisterPage.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DockableDialogs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\TopLevelCommands\ExternalCommandRegisterPage.cs	34	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	DockableDialogs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\TopLevelCommands\ExternalCommandRegisterPage.cs	34	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	DockableDialogs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\TopLevelCommands\ExternalCommandRegisterPage.cs	35	Active
Error	CS0246	The type or namespace name 'IExternalCommandAvailability' could not be found (are you missing a using directive or an assembly reference?)	DockableDialogs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\TopLevelCommands\ExternalCommandRegisterPage.cs	35	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	DockableDialogs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\TopLevelCommands\ExternalCommandRegisterPage.cs	37	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	DockableDialogs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\TopLevelCommands\ExternalCommandRegisterPage.cs	37	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	DockableDialogs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\TopLevelCommands\ExternalCommandRegisterPage.cs	38	Active
Error	CS0246	The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)	DockableDialogs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\TopLevelCommands\ExternalCommandRegisterPage.cs	64	Active
Error	CS0246	The type or namespace name 'CategorySet' could not be found (are you missing a using directive or an assembly reference?)	DockableDialogs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\TopLevelCommands\ExternalCommandRegisterPage.cs	64	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DockableDialogs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\TopLevelCommands\ExternalCommandShowPage.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DockableDialogs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\TopLevelCommands\ExternalCommandShowPage.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DockableDialogs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\TopLevelCommands\ExternalCommandShowPage.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DockableDialogs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\TopLevelCommands\ExternalCommandShowPage.cs	33	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	DockableDialogs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\TopLevelCommands\ExternalCommandShowPage.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DockableDialogs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\TopLevelCommands\ExternalCommandShowPage.cs	34	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	DockableDialogs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\TopLevelCommands\ExternalCommandShowPage.cs	34	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	DockableDialogs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\TopLevelCommands\ExternalCommandShowPage.cs	35	Active
Error	CS0246	The type or namespace name 'IExternalCommandAvailability' could not be found (are you missing a using directive or an assembly reference?)	DockableDialogs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\TopLevelCommands\ExternalCommandShowPage.cs	35	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	DockableDialogs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\TopLevelCommands\ExternalCommandShowPage.cs	37	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	DockableDialogs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\TopLevelCommands\ExternalCommandShowPage.cs	37	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	DockableDialogs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\TopLevelCommands\ExternalCommandShowPage.cs	38	Active
Error	CS0246	The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)	DockableDialogs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\TopLevelCommands\ExternalCommandShowPage.cs	56	Active
Error	CS0246	The type or namespace name 'CategorySet' could not be found (are you missing a using directive or an assembly reference?)	DockableDialogs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\TopLevelCommands\ExternalCommandShowPage.cs	56	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DockableDialogs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\Utility\Constants.cs	28	Active
Error	CS0246	The type or namespace name 'DockablePaneId' could not be found (are you missing a using directive or an assembly reference?)	DockableDialogs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\Utility\Constants.cs	44	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DockableDialogs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\Utility\Log.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\Command.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\Command.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\Command.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\Command.cs	41	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\Command.cs	41	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\Command.cs	42	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\Command.cs	42	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\Command.cs	43	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\Command.cs	43	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\Command.cs	44	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\Command.cs	64	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\Command.cs	64	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\Command.cs	66	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\Command.cs	122	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\Command.cs	122	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\Command.cs	123	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\Command.cs	123	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\Command.cs	124	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\Command.cs	144	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\Command.cs	144	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\Command.cs	144	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\Command.cs	194	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\Command.cs	194	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\Command.cs	195	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\Command.cs	195	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\Command.cs	196	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\Command.cs	216	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\Command.cs	216	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\Command.cs	216	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorFamily.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorFamily.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorFamily.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorFamily.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorFamily.cs	30	Active
Error	CS0246	The type or namespace name 'Family' could not be found (are you missing a using directive or an assembly reference?)	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorFamily.cs	43	Active
Error	CS0246	The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorFamily.cs	47	Active
Error	CS0246	The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorFamily.cs	49	Active
Error	CS0246	The type or namespace name 'Family' could not be found (are you missing a using directive or an assembly reference?)	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorFamily.cs	132	Active
Error	CS0246	The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorFamily.cs	132	Active
Error	CS0246	The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorFamily.cs	177	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorFamilyGeometry.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorFamilyGeometry.cs	28	Active
Error	CS0246	The type or namespace name 'Options' could not be found (are you missing a using directive or an assembly reference?)	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorFamilyGeometry.cs	42	Active
Error	CS0246	The type or namespace name 'BoundingBoxXYZ' could not be found (are you missing a using directive or an assembly reference?)	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorFamilyGeometry.cs	44	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorFamilyGeometry.cs	46	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorFamilyGeometry.cs	72	Active
Error	CS0246	The type or namespace name 'ViewPlan' could not be found (are you missing a using directive or an assembly reference?)	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorFamilyGeometry.cs	111	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorFamilyGeometry.cs	111	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorFamilyGeometry.cs	130	Active
Error	CS0246	The type or namespace name 'GeometryObject' could not be found (are you missing a using directive or an assembly reference?)	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorFamilyGeometry.cs	181	Active
Error	CS0246	The type or namespace name 'GeometryObject' could not be found (are you missing a using directive or an assembly reference?)	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorFamilyGeometry.cs	200	Active
Error	CS0246	The type or namespace name 'GeometryObject' could not be found (are you missing a using directive or an assembly reference?)	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorFamilyGeometry.cs	214	Active
Error	CS0246	The type or namespace name 'GeometryObject' could not be found (are you missing a using directive or an assembly reference?)	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorFamilyGeometry.cs	224	Active
Error	CS0246	The type or namespace name 'GeometryObject' could not be found (are you missing a using directive or an assembly reference?)	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorFamilyGeometry.cs	240	Active
Error	CS0246	The type or namespace name 'GeometryObject' could not be found (are you missing a using directive or an assembly reference?)	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorFamilyGeometry.cs	252	Active
Error	CS0246	The type or namespace name 'GeometryObject' could not be found (are you missing a using directive or an assembly reference?)	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorFamilyGeometry.cs	285	Active
Error	CS0246	The type or namespace name 'GeometryObject' could not be found (are you missing a using directive or an assembly reference?)	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorFamilyGeometry.cs	302	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorSharedParameters.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorSharedParameters.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorSharedParameters.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorSharedParameters.cs	29	Active
Error	CS0246	The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorSharedParameters.cs	49	Active
Error	CS0246	The type or namespace name 'DefinitionFile' could not be found (are you missing a using directive or an assembly reference?)	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorSharedParameters.cs	137	Active
Error	CS0246	The type or namespace name 'Application' could not be found (are you missing a using directive or an assembly reference?)	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorSharedParameters.cs	137	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorSharedParameters.cs	174	Active
Error	CS0246	The type or namespace name 'BuiltInCategory' could not be found (are you missing a using directive or an assembly reference?)	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorSharedParameters.cs	174	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorSwingData.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorSwingData.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorSwingData.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorSwingData.cs	49	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorSwingData.cs	91	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorSwingData.cs	115	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorSwingData.cs	115	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorSwingData.cs	237	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorSwingData.cs	308	Active
Error	CS0246	The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorSwingData.cs	308	Active
Error	CS0246	The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorSwingData.cs	380	Active
Error	CS0246	The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorSwingData.cs	404	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorSwingData.cs	450	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\ExternalApplication.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\ExternalApplication.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\ExternalApplication.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\ExternalApplication.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\ExternalApplication.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\ExternalApplication.cs	43	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\ExternalApplication.cs	43	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\ExternalApplication.cs	44	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\ExternalApplication.cs	44	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\ExternalApplication.cs	45	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\ExternalApplication.cs	45	Active
Error	CS0246	The type or namespace name 'IExternalApplication' could not be found (are you missing a using directive or an assembly reference?)	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\ExternalApplication.cs	46	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\ExternalApplication.cs	51	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\ExternalApplication.cs	68	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\ExternalApplication.cs	68	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\ExternalApplication.cs	141	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\ExternalApplication.cs	141	Active
Error	CS0246	The type or namespace name 'DocumentSavingEventArgs' could not be found (are you missing a using directive or an assembly reference?)	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\ExternalApplication.cs	154	Active
Error	CS0246	The type or namespace name 'DocumentSavingAsEventArgs' could not be found (are you missing a using directive or an assembly reference?)	DoorSwing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\ExternalApplication.cs	198	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DuplicateGraphics	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\Application.cs	40	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DuplicateGraphics	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\Application.cs	41	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DuplicateGraphics	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\Application.cs	42	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DuplicateGraphics	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\Application.cs	43	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DuplicateGraphics	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\Application.cs	44	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DuplicateGraphics	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\Application.cs	53	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	DuplicateGraphics	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\Application.cs	53	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DuplicateGraphics	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\Application.cs	54	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	DuplicateGraphics	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\Application.cs	54	Active
Error	CS0246	The type or namespace name 'IExternalApplication' could not be found (are you missing a using directive or an assembly reference?)	DuplicateGraphics	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\Application.cs	55	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	DuplicateGraphics	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\Application.cs	64	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	DuplicateGraphics	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\Application.cs	64	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	DuplicateGraphics	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\Application.cs	90	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	DuplicateGraphics	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\Application.cs	90	Active
Error	CS0246	The type or namespace name 'DocumentClosingEventArgs' could not be found (are you missing a using directive or an assembly reference?)	DuplicateGraphics	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\Application.cs	103	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	DuplicateGraphics	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\Application.cs	114	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	DuplicateGraphics	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\Application.cs	126	Active
Error	CS0246	The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)	DuplicateGraphics	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\Application.cs	138	Active
Error	CS0246	The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)	DuplicateGraphics	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\Application.cs	166	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	DuplicateGraphics	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\Application.cs	197	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	DuplicateGraphics	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\Application.cs	242	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	DuplicateGraphics	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\Application.cs	243	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DuplicateGraphics	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\Command.cs	24	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DuplicateGraphics	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\Command.cs	25	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DuplicateGraphics	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\Command.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DuplicateGraphics	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\Command.cs	34	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	DuplicateGraphics	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\Command.cs	34	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DuplicateGraphics	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\Command.cs	35	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	DuplicateGraphics	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\Command.cs	35	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	DuplicateGraphics	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\Command.cs	36	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	DuplicateGraphics	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\Command.cs	54	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	DuplicateGraphics	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\Command.cs	54	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	DuplicateGraphics	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\Command.cs	54	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DuplicateGraphics	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\Command.cs	73	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	DuplicateGraphics	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\Command.cs	73	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DuplicateGraphics	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\Command.cs	74	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	DuplicateGraphics	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\Command.cs	74	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	DuplicateGraphics	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\Command.cs	75	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	DuplicateGraphics	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\Command.cs	93	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	DuplicateGraphics	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\Command.cs	93	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	DuplicateGraphics	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\Command.cs	93	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DuplicateGraphics	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\RevitElementDrawingServer.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DuplicateGraphics	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\RevitElementDrawingServer.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DuplicateGraphics	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\RevitElementDrawingServer.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DuplicateGraphics	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\RevitElementDrawingServer.cs	31	Active
Error	CS0246	The type or namespace name 'IDirectContext3DServer' could not be found (are you missing a using directive or an assembly reference?)	DuplicateGraphics	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\RevitElementDrawingServer.cs	39	Active
Error	CS0246	The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)	DuplicateGraphics	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\RevitElementDrawingServer.cs	41	Active
Error	CS0246	The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)	DuplicateGraphics	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\RevitElementDrawingServer.cs	41	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	DuplicateGraphics	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\RevitElementDrawingServer.cs	41	Active
Error	CS0246	The type or namespace name 'ExternalServiceId' could not be found (are you missing a using directive or an assembly reference?)	DuplicateGraphics	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\RevitElementDrawingServer.cs	52	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DuplicateGraphics	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\RevitElementDrawingServer.cs	67	Active
Error	CS0246	The type or namespace name 'Outline' could not be found (are you missing a using directive or an assembly reference?)	DuplicateGraphics	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\RevitElementDrawingServer.cs	80	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DuplicateGraphics	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\RevitElementDrawingServer.cs	80	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DuplicateGraphics	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\RevitElementDrawingServer.cs	98	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DuplicateGraphics	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\RevitElementDrawingServer.cs	101	Active
Error	CS0246	The type or namespace name 'DisplayStyle' could not be found (are you missing a using directive or an assembly reference?)	DuplicateGraphics	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\RevitElementDrawingServer.cs	101	Active
Error	CS0246	The type or namespace name 'GeometryElement' could not be found (are you missing a using directive or an assembly reference?)	DuplicateGraphics	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\RevitElementDrawingServer.cs	152	Active
Error	CS0246	The type or namespace name 'DisplayStyle' could not be found (are you missing a using directive or an assembly reference?)	DuplicateGraphics	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\RevitElementDrawingServer.cs	152	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	DuplicateGraphics	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\RevitElementDrawingServer.cs	390	Active
Error	CS0246	The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)	DuplicateGraphics	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\RevitElementDrawingServer.cs	397	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	DuplicateGraphics	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\RevitElementDrawingServer.cs	398	Active
Error	CS0246	The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)	DuplicateGraphics	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\RevitElementDrawingServer.cs	399	Active
Error	CS0246	The type or namespace name 'Mesh' could not be found (are you missing a using directive or an assembly reference?)	DuplicateGraphics	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\RevitElementDrawingServer.cs	410	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	DuplicateGraphics	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\RevitElementDrawingServer.cs	410	Active
Error	CS0246	The type or namespace name 'ColorWithTransparency' could not be found (are you missing a using directive or an assembly reference?)	DuplicateGraphics	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\RevitElementDrawingServer.cs	410	Active
Error	CS0246	The type or namespace name 'Mesh' could not be found (are you missing a using directive or an assembly reference?)	DuplicateGraphics	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\RevitElementDrawingServer.cs	417	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	DuplicateGraphics	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\RevitElementDrawingServer.cs	418	Active
Error	CS0246	The type or namespace name 'ColorWithTransparency' could not be found (are you missing a using directive or an assembly reference?)	DuplicateGraphics	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\RevitElementDrawingServer.cs	419	Active
Error	CS0246	The type or namespace name 'DisplayStyle' could not be found (are you missing a using directive or an assembly reference?)	DuplicateGraphics	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\RevitElementDrawingServer.cs	426	Active
Error	CS0246	The type or namespace name 'DisplayStyle' could not be found (are you missing a using directive or an assembly reference?)	DuplicateGraphics	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\RevitElementDrawingServer.cs	433	Active
Error	CS0246	The type or namespace name 'DisplayStyle' could not be found (are you missing a using directive or an assembly reference?)	DuplicateGraphics	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\RevitElementDrawingServer.cs	448	Active
Error	CS0246	The type or namespace name 'VertexFormatBits' could not be found (are you missing a using directive or an assembly reference?)	DuplicateGraphics	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\RevitElementDrawingServer.cs	450	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	DuplicateGraphics	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\RevitElementDrawingServer.cs	453	Active
Error	CS0246	The type or namespace name 'VertexBuffer' could not be found (are you missing a using directive or an assembly reference?)	DuplicateGraphics	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\RevitElementDrawingServer.cs	458	Active
Error	CS0246	The type or namespace name 'IndexBuffer' could not be found (are you missing a using directive or an assembly reference?)	DuplicateGraphics	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\RevitElementDrawingServer.cs	459	Active
Error	CS0246	The type or namespace name 'VertexFormat' could not be found (are you missing a using directive or an assembly reference?)	DuplicateGraphics	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\RevitElementDrawingServer.cs	460	Active
Error	CS0246	The type or namespace name 'EffectInstance' could not be found (are you missing a using directive or an assembly reference?)	DuplicateGraphics	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\RevitElementDrawingServer.cs	461	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DuplicateViews	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\Application.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DuplicateViews	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\Application.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DuplicateViews	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\Application.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DuplicateViews	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\Application.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DuplicateViews	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\Application.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DuplicateViews	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\Application.cs	42	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	DuplicateViews	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\Application.cs	42	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DuplicateViews	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\Application.cs	43	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	DuplicateViews	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\Application.cs	43	Active
Error	CS0246	The type or namespace name 'IExternalApplication' could not be found (are you missing a using directive or an assembly reference?)	DuplicateViews	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\Application.cs	44	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	DuplicateViews	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\Application.cs	52	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	DuplicateViews	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\Application.cs	52	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	DuplicateViews	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\Application.cs	62	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	DuplicateViews	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\Application.cs	62	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	DuplicateViews	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\Application.cs	71	Active
Error	CS0246	The type or namespace name 'PushButton' could not be found (are you missing a using directive or an assembly reference?)	DuplicateViews	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\Application.cs	91	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DuplicateViews	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\DuplicateAcrossDocumentsCommand.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DuplicateViews	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\DuplicateAcrossDocumentsCommand.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DuplicateViews	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\DuplicateAcrossDocumentsCommand.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DuplicateViews	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\DuplicateAcrossDocumentsCommand.cs	36	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	DuplicateViews	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\DuplicateAcrossDocumentsCommand.cs	36	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	DuplicateViews	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\DuplicateAcrossDocumentsCommand.cs	37	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	DuplicateViews	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\DuplicateAcrossDocumentsCommand.cs	48	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	DuplicateViews	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\DuplicateAcrossDocumentsCommand.cs	48	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DuplicateViews	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\DuplicateAcrossDocumentsCommand.cs	48	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DuplicateViews	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\DuplicateViewUtils.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DuplicateViews	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\DuplicateViewUtils.cs	28	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	DuplicateViews	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\DuplicateViewUtils.cs	43	Active
Error	CS0246	The type or namespace name 'ViewSchedule' could not be found (are you missing a using directive or an assembly reference?)	DuplicateViews	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\DuplicateViewUtils.cs	44	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	DuplicateViews	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\DuplicateViewUtils.cs	45	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	DuplicateViews	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\DuplicateViewUtils.cs	62	Active
Error	CS0246	The type or namespace name 'ViewDrafting' could not be found (are you missing a using directive or an assembly reference?)	DuplicateViews	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\DuplicateViewUtils.cs	63	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	DuplicateViews	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\DuplicateViewUtils.cs	64	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	DuplicateViews	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\DuplicateViewUtils.cs	106	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	DuplicateViews	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\DuplicateViewUtils.cs	106	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	DuplicateViews	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\DuplicateViewUtils.cs	106	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	DuplicateViews	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\DuplicateViewUtils.cs	107	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	DuplicateViews	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\DuplicateViewUtils.cs	108	Active
Error	CS0246	The type or namespace name 'View' could not be found (are you missing a using directive or an assembly reference?)	DuplicateViews	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\DuplicateViewUtils.cs	181	Active
Error	CS0246	The type or namespace name 'View' could not be found (are you missing a using directive or an assembly reference?)	DuplicateViews	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\DuplicateViewUtils.cs	182	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	DuplicateViews	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\DuplicateViewUtils.cs	227	Active
Error	CS0246	The type or namespace name 'View' could not be found (are you missing a using directive or an assembly reference?)	DuplicateViews	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\DuplicateViewUtils.cs	227	Active
Error	CS0246	The type or namespace name 'IDuplicateTypeNamesHandler' could not be found (are you missing a using directive or an assembly reference?)	DuplicateViews	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\DuplicateViewUtils.cs	237	Active
Error	CS0246	The type or namespace name 'DuplicateTypeAction' could not be found (are you missing a using directive or an assembly reference?)	DuplicateViews	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\DuplicateViewUtils.cs	246	Active
Error	CS0246	The type or namespace name 'DuplicateTypeNamesHandlerArgs' could not be found (are you missing a using directive or an assembly reference?)	DuplicateViews	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\DuplicateViewUtils.cs	246	Active
Error	CS0246	The type or namespace name 'IFailuresPreprocessor' could not be found (are you missing a using directive or an assembly reference?)	DuplicateViews	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\DuplicateViewUtils.cs	258	Active
Error	CS0246	The type or namespace name 'FailureProcessingResult' could not be found (are you missing a using directive or an assembly reference?)	DuplicateViews	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\DuplicateViewUtils.cs	267	Active
Error	CS0246	The type or namespace name 'FailuresAccessor' could not be found (are you missing a using directive or an assembly reference?)	DuplicateViews	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\DuplicateViewUtils.cs	267	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DynamicModelUpdate	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DynamicModelUpdate\CS\Application.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DynamicModelUpdate	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DynamicModelUpdate\CS\Application.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DynamicModelUpdate	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DynamicModelUpdate\CS\Application.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DynamicModelUpdate	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DynamicModelUpdate\CS\Application.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DynamicModelUpdate	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DynamicModelUpdate\CS\Application.cs	39	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	DynamicModelUpdate	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DynamicModelUpdate\CS\Application.cs	39	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DynamicModelUpdate	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DynamicModelUpdate\CS\Application.cs	40	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	DynamicModelUpdate	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DynamicModelUpdate\CS\Application.cs	42	Active
Error	CS0246	The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)	DynamicModelUpdate	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DynamicModelUpdate\CS\Application.cs	43	Active
Error	CS0246	The type or namespace name 'AddInId' could not be found (are you missing a using directive or an assembly reference?)	DynamicModelUpdate	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DynamicModelUpdate\CS\Application.cs	47	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	DynamicModelUpdate	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DynamicModelUpdate\CS\Application.cs	49	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	DynamicModelUpdate	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DynamicModelUpdate\CS\Application.cs	50	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	DynamicModelUpdate	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DynamicModelUpdate\CS\Application.cs	52	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	DynamicModelUpdate	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DynamicModelUpdate\CS\Application.cs	52	Active
Error	CS0538	'IExternalCommand' in explicit interface declaration is not an interface	DynamicModelUpdate	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DynamicModelUpdate\CS\Application.cs	52	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	DynamicModelUpdate	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DynamicModelUpdate\CS\Application.cs	52	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	DynamicModelUpdate	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DynamicModelUpdate\CS\Application.cs	52	Active
Error	CS0246	The type or namespace name 'DocumentClosingEventArgs' could not be found (are you missing a using directive or an assembly reference?)	DynamicModelUpdate	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DynamicModelUpdate\CS\Application.cs	161	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DynamicModelUpdate	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DynamicModelUpdate\CS\SectionUpdater.cs	25	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DynamicModelUpdate	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DynamicModelUpdate\CS\SectionUpdater.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	DynamicModelUpdate	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DynamicModelUpdate\CS\SectionUpdater.cs	27	Active
Error	CS0246	The type or namespace name 'IUpdater' could not be found (are you missing a using directive or an assembly reference?)	DynamicModelUpdate	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DynamicModelUpdate\CS\SectionUpdater.cs	35	Active
Error	CS0246	The type or namespace name 'AddInId' could not be found (are you missing a using directive or an assembly reference?)	DynamicModelUpdate	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DynamicModelUpdate\CS\SectionUpdater.cs	37	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	DynamicModelUpdate	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DynamicModelUpdate\CS\SectionUpdater.cs	43	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	DynamicModelUpdate	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DynamicModelUpdate\CS\SectionUpdater.cs	50	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	DynamicModelUpdate	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DynamicModelUpdate\CS\SectionUpdater.cs	50	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	DynamicModelUpdate	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DynamicModelUpdate\CS\SectionUpdater.cs	50	Active
Error	CS0246	The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)	DynamicModelUpdate	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DynamicModelUpdate\CS\SectionUpdater.cs	50	Active
Error	CS0246	The type or namespace name 'UpdaterData' could not be found (are you missing a using directive or an assembly reference?)	DynamicModelUpdate	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DynamicModelUpdate\CS\SectionUpdater.cs	64	Active
Error	CS0246	The type or namespace name 'UpdaterId' could not be found (are you missing a using directive or an assembly reference?)	DynamicModelUpdate	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DynamicModelUpdate\CS\SectionUpdater.cs	89	Active
Error	CS0246	The type or namespace name 'ChangePriority' could not be found (are you missing a using directive or an assembly reference?)	DynamicModelUpdate	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DynamicModelUpdate\CS\SectionUpdater.cs	104	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	DynamicModelUpdate	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DynamicModelUpdate\CS\SectionUpdater.cs	111	Active
Error	CS0246	The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)	DynamicModelUpdate	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DynamicModelUpdate\CS\SectionUpdater.cs	111	Active
Error	CS0246	The type or namespace name 'ViewSection' could not be found (are you missing a using directive or an assembly reference?)	DynamicModelUpdate	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DynamicModelUpdate\CS\SectionUpdater.cs	111	Active
Error	CS0246	The type or namespace name 'UpdaterId' could not be found (are you missing a using directive or an assembly reference?)	DynamicModelUpdate	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DynamicModelUpdate\CS\SectionUpdater.cs	193	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	DynamicModelUpdate	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DynamicModelUpdate\CS\SectionUpdater.cs	194	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	DynamicModelUpdate	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DynamicModelUpdate\CS\SectionUpdater.cs	195	Active
Error	CS0246	The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)	DynamicModelUpdate	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DynamicModelUpdate\CS\SectionUpdater.cs	196	Active
Error	BC2017	could not find library 'Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Viewers\RevitViewer\VB.NET\bin\RevitViewer.dll'	ElementViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Viewers\ElementViewer\VB.NET\vbc	1	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	EnergyAnalysisModel	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\EnergyAnalysisModel\CS\Command.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	EnergyAnalysisModel	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\EnergyAnalysisModel\CS\Command.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	EnergyAnalysisModel	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\EnergyAnalysisModel\CS\Command.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	EnergyAnalysisModel	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\EnergyAnalysisModel\CS\Command.cs	40	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	EnergyAnalysisModel	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\EnergyAnalysisModel\CS\Command.cs	40	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	EnergyAnalysisModel	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\EnergyAnalysisModel\CS\Command.cs	41	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	EnergyAnalysisModel	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\EnergyAnalysisModel\CS\Command.cs	41	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	EnergyAnalysisModel	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\EnergyAnalysisModel\CS\Command.cs	42	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	EnergyAnalysisModel	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\EnergyAnalysisModel\CS\Command.cs	42	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	EnergyAnalysisModel	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\EnergyAnalysisModel\CS\Command.cs	43	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	EnergyAnalysisModel	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\EnergyAnalysisModel\CS\Command.cs	62	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	EnergyAnalysisModel	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\EnergyAnalysisModel\CS\Command.cs	62	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	EnergyAnalysisModel	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\EnergyAnalysisModel\CS\Command.cs	63	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	EnergyAnalysisModel	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\EnergyAnalysisModel\CS\EnergyAnalysisModel.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	EnergyAnalysisModel	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\EnergyAnalysisModel\CS\EnergyAnalysisModel.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	EnergyAnalysisModel	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\EnergyAnalysisModel\CS\EnergyAnalysisModel.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	EnergyAnalysisModel	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\EnergyAnalysisModel\CS\EnergyAnalysisModel.cs	31	Active
Error	CS0246	The type or namespace name 'EnergyAnalysisDetailModel' could not be found (are you missing a using directive or an assembly reference?)	EnergyAnalysisModel	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\EnergyAnalysisModel\CS\EnergyAnalysisModel.cs	38	Active
Error	CS0246	The type or namespace name 'EnergyAnalysisDetailModelOptions' could not be found (are you missing a using directive or an assembly reference?)	EnergyAnalysisModel	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\EnergyAnalysisModel\CS\EnergyAnalysisModel.cs	40	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	EnergyAnalysisModel	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\EnergyAnalysisModel\CS\EnergyAnalysisModel.cs	42	Active
Error	CS0246	The type or namespace name 'EnergyAnalysisDetailModelOptions' could not be found (are you missing a using directive or an assembly reference?)	EnergyAnalysisModel	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\EnergyAnalysisModel\CS\EnergyAnalysisModel.cs	45	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	EnergyAnalysisModel	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\EnergyAnalysisModel\CS\EnergyAnalysisModel.cs	61	Active
Error	CS0246	The type or namespace name 'EnergyAnalysisSurface' could not be found (are you missing a using directive or an assembly reference?)	EnergyAnalysisModel	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\EnergyAnalysisModel\CS\EnergyAnalysisModel.cs	157	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ErrorHandling	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ErrorHandling\CS\Command.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ErrorHandling	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ErrorHandling\CS\Command.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ErrorHandling	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ErrorHandling\CS\Command.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ErrorHandling	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ErrorHandling\CS\Command.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ErrorHandling	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ErrorHandling\CS\Command.cs	38	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	ErrorHandling	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ErrorHandling\CS\Command.cs	38	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ErrorHandling	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ErrorHandling\CS\Command.cs	39	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	ErrorHandling	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ErrorHandling\CS\Command.cs	39	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ErrorHandling	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ErrorHandling\CS\Command.cs	40	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	ErrorHandling	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ErrorHandling\CS\Command.cs	40	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	ErrorHandling	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ErrorHandling\CS\Command.cs	41	Active
Error	CS0246	The type or namespace name 'IExternalApplication' could not be found (are you missing a using directive or an assembly reference?)	ErrorHandling	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ErrorHandling\CS\Command.cs	41	Active
Error	CS0246	The type or namespace name 'FailureDefinitionId' could not be found (are you missing a using directive or an assembly reference?)	ErrorHandling	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ErrorHandling\CS\Command.cs	46	Active
Error	CS0246	The type or namespace name 'FailureDefinitionId' could not be found (are you missing a using directive or an assembly reference?)	ErrorHandling	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ErrorHandling\CS\Command.cs	50	Active
Error	CS0246	The type or namespace name 'FailureDefinition' could not be found (are you missing a using directive or an assembly reference?)	ErrorHandling	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ErrorHandling\CS\Command.cs	54	Active
Error	CS0246	The type or namespace name 'FailureDefinition' could not be found (are you missing a using directive or an assembly reference?)	ErrorHandling	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ErrorHandling\CS\Command.cs	58	Active
Error	CS0246	The type or namespace name 'Application' could not be found (are you missing a using directive or an assembly reference?)	ErrorHandling	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ErrorHandling\CS\Command.cs	62	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	ErrorHandling	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ErrorHandling\CS\Command.cs	66	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	ErrorHandling	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ErrorHandling\CS\Command.cs	74	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	ErrorHandling	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ErrorHandling\CS\Command.cs	74	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	ErrorHandling	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ErrorHandling\CS\Command.cs	84	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	ErrorHandling	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ErrorHandling\CS\Command.cs	84	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ErrorHandling	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ErrorHandling\CS\Command.cs	133	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	ErrorHandling	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ErrorHandling\CS\Command.cs	133	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ErrorHandling	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ErrorHandling\CS\Command.cs	134	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ErrorHandling	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ErrorHandling\CS\Command.cs	254	Active
Error	CS0246	The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)	ErrorHandling	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ErrorHandling\CS\Command.cs	289	Active
Error	CS0246	The type or namespace name 'IFailuresPreprocessor' could not be found (are you missing a using directive or an assembly reference?)	ErrorHandling	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ErrorHandling\CS\Command.cs	314	Active
Error	CS0246	The type or namespace name 'FailureProcessingResult' could not be found (are you missing a using directive or an assembly reference?)	ErrorHandling	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ErrorHandling\CS\Command.cs	321	Active
Error	CS0246	The type or namespace name 'FailuresAccessor' could not be found (are you missing a using directive or an assembly reference?)	ErrorHandling	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ErrorHandling\CS\Command.cs	321	Active
Error	CS0246	The type or namespace name 'IFailuresProcessor' could not be found (are you missing a using directive or an assembly reference?)	ErrorHandling	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ErrorHandling\CS\Command.cs	366	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	ErrorHandling	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ErrorHandling\CS\Command.cs	372	Active
Error	CS0246	The type or namespace name 'FailureProcessingResult' could not be found (are you missing a using directive or an assembly reference?)	ErrorHandling	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ErrorHandling\CS\Command.cs	381	Active
Error	CS0246	The type or namespace name 'FailuresAccessor' could not be found (are you missing a using directive or an assembly reference?)	ErrorHandling	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ErrorHandling\CS\Command.cs	381	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	EventsMonitor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\EventsMonitor\CS\Command.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	EventsMonitor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\EventsMonitor\CS\Command.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	EventsMonitor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\EventsMonitor\CS\Command.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	EventsMonitor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\EventsMonitor\CS\Command.cs	42	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	EventsMonitor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\EventsMonitor\CS\Command.cs	42	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	EventsMonitor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\EventsMonitor\CS\Command.cs	43	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	EventsMonitor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\EventsMonitor\CS\Command.cs	43	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	EventsMonitor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\EventsMonitor\CS\Command.cs	44	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	EventsMonitor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\EventsMonitor\CS\Command.cs	44	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	EventsMonitor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\EventsMonitor\CS\Command.cs	45	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	EventsMonitor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\EventsMonitor\CS\Command.cs	64	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	EventsMonitor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\EventsMonitor\CS\Command.cs	64	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	EventsMonitor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\EventsMonitor\CS\Command.cs	66	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	EventsMonitor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\EventsMonitor\CS\EventManager.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	EventsMonitor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\EventsMonitor\CS\EventManager.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	EventsMonitor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\EventsMonitor\CS\EventManager.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	EventsMonitor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\EventsMonitor\CS\EventManager.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	EventsMonitor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\EventsMonitor\CS\EventManager.cs	33	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	EventsMonitor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\EventsMonitor\CS\EventManager.cs	50	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	EventsMonitor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\EventsMonitor\CS\EventManager.cs	71	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	EventsMonitor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\EventsMonitor\CS\EventsSettingForm.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	EventsMonitor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\EventsMonitor\CS\ExternalApplication.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	EventsMonitor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\EventsMonitor\CS\ExternalApplication.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	EventsMonitor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\EventsMonitor\CS\ExternalApplication.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	EventsMonitor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\EventsMonitor\CS\ExternalApplication.cs	42	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	EventsMonitor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\EventsMonitor\CS\ExternalApplication.cs	42	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	EventsMonitor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\EventsMonitor\CS\ExternalApplication.cs	43	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	EventsMonitor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\EventsMonitor\CS\ExternalApplication.cs	43	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	EventsMonitor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\EventsMonitor\CS\ExternalApplication.cs	44	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	EventsMonitor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\EventsMonitor\CS\ExternalApplication.cs	44	Active
Error	CS0246	The type or namespace name 'IExternalApplication' could not be found (are you missing a using directive or an assembly reference?)	EventsMonitor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\EventsMonitor\CS\ExternalApplication.cs	45	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	EventsMonitor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\EventsMonitor\CS\ExternalApplication.cs	55	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	EventsMonitor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\EventsMonitor\CS\ExternalApplication.cs	216	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	EventsMonitor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\EventsMonitor\CS\ExternalApplication.cs	216	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	EventsMonitor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\EventsMonitor\CS\ExternalApplication.cs	287	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	EventsMonitor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\EventsMonitor\CS\ExternalApplication.cs	287	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	EventsMonitor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\EventsMonitor\CS\ExternalApplication.cs	319	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	EventsMonitor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\EventsMonitor\CS\JournalProcessor.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	EventsMonitor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\EventsMonitor\CS\JournalProcessor.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	EventsMonitor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\EventsMonitor\CS\LogManager.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	EventsMonitor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\EventsMonitor\CS\LogManager.cs	32	Active
Error	CS0006	Metadata file 'Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageManager\SchemaWrapperTools\CS\bin\Debug\SchemaWrapperTools.dll' could not be found	ExtensibleStorageManager	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageManager\ExtensibleStorageManager\CS\CSC	1	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ExtensibleStorageUtility	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageUtility\CS\DeleteStorage.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ExtensibleStorageUtility	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageUtility\CS\DeleteStorage.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ExtensibleStorageUtility	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageUtility\CS\DeleteStorage.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ExtensibleStorageUtility	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageUtility\CS\DeleteStorage.cs	39	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	ExtensibleStorageUtility	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageUtility\CS\DeleteStorage.cs	39	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ExtensibleStorageUtility	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageUtility\CS\DeleteStorage.cs	40	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	ExtensibleStorageUtility	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageUtility\CS\DeleteStorage.cs	40	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	ExtensibleStorageUtility	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageUtility\CS\DeleteStorage.cs	41	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	ExtensibleStorageUtility	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageUtility\CS\DeleteStorage.cs	43	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	ExtensibleStorageUtility	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageUtility\CS\DeleteStorage.cs	43	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	ExtensibleStorageUtility	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageUtility\CS\DeleteStorage.cs	43	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ExtensibleStorageUtility	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageUtility\CS\QueryStorage.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ExtensibleStorageUtility	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageUtility\CS\QueryStorage.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ExtensibleStorageUtility	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageUtility\CS\QueryStorage.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ExtensibleStorageUtility	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageUtility\CS\QueryStorage.cs	41	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	ExtensibleStorageUtility	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageUtility\CS\QueryStorage.cs	41	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ExtensibleStorageUtility	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageUtility\CS\QueryStorage.cs	42	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	ExtensibleStorageUtility	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageUtility\CS\QueryStorage.cs	42	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	ExtensibleStorageUtility	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageUtility\CS\QueryStorage.cs	43	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	ExtensibleStorageUtility	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageUtility\CS\QueryStorage.cs	45	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	ExtensibleStorageUtility	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageUtility\CS\QueryStorage.cs	45	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	ExtensibleStorageUtility	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageUtility\CS\QueryStorage.cs	45	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ExtensibleStorageUtility	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageUtility\CS\Utility.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ExtensibleStorageUtility	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageUtility\CS\Utility.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ExtensibleStorageUtility	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageUtility\CS\Utility.cs	30	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	ExtensibleStorageUtility	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageUtility\CS\Utility.cs	41	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	ExtensibleStorageUtility	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageUtility\CS\Utility.cs	63	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	ExtensibleStorageUtility	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageUtility\CS\Utility.cs	83	Active
Error	CS0246	The type or namespace name 'Schema' could not be found (are you missing a using directive or an assembly reference?)	ExtensibleStorageUtility	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageUtility\CS\Utility.cs	83	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	ExtensibleStorageUtility	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageUtility\CS\Utility.cs	104	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	ExtensibleStorageUtility	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageUtility\CS\Utility.cs	104	Active
Error	CS0246	The type or namespace name 'Schema' could not be found (are you missing a using directive or an assembly reference?)	ExtensibleStorageUtility	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageUtility\CS\Utility.cs	104	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	ExtensibleStorageUtility	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageUtility\CS\Utility.cs	116	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	ExtensibleStorageUtility	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageUtility\CS\Utility.cs	116	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ExternalCommandRegistration	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalCommand\CS\ExternalCommandRegistration\AvailabilityClass.cs	26	Active
Error	CS0246	The type or namespace name 'IExternalCommandAvailability' could not be found (are you missing a using directive or an assembly reference?)	ExternalCommandRegistration	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalCommand\CS\ExternalCommandRegistration\AvailabilityClass.cs	36	Active
Error	CS0246	The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)	ExternalCommandRegistration	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalCommand\CS\ExternalCommandRegistration\AvailabilityClass.cs	40	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ExternalCommandRegistration	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalCommand\CS\ExternalCommandRegistration\AvailabilityClass.cs	41	Active
Error	CS0246	The type or namespace name 'IExternalCommandAvailability' could not be found (are you missing a using directive or an assembly reference?)	ExternalCommandRegistration	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalCommand\CS\ExternalCommandRegistration\AvailabilityClass.cs	65	Active
Error	CS0246	The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)	ExternalCommandRegistration	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalCommand\CS\ExternalCommandRegistration\AvailabilityClass.cs	69	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ExternalCommandRegistration	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalCommand\CS\ExternalCommandRegistration\AvailabilityClass.cs	70	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ExternalCommandRegistration	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalCommand\CS\ExternalCommandRegistration\ExternalCommandClass.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ExternalCommandRegistration	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalCommand\CS\ExternalCommandRegistration\ExternalCommandClass.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ExternalCommandRegistration	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalCommand\CS\ExternalCommandRegistration\ExternalCommandClass.cs	35	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	ExternalCommandRegistration	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalCommand\CS\ExternalCommandRegistration\ExternalCommandClass.cs	35	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ExternalCommandRegistration	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalCommand\CS\ExternalCommandRegistration\ExternalCommandClass.cs	36	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	ExternalCommandRegistration	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalCommand\CS\ExternalCommandRegistration\ExternalCommandClass.cs	36	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ExternalCommandRegistration	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalCommand\CS\ExternalCommandRegistration\ExternalCommandClass.cs	37	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	ExternalCommandRegistration	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalCommand\CS\ExternalCommandRegistration\ExternalCommandClass.cs	37	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	ExternalCommandRegistration	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalCommand\CS\ExternalCommandRegistration\ExternalCommandClass.cs	38	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	ExternalCommandRegistration	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalCommand\CS\ExternalCommandRegistration\ExternalCommandClass.cs	42	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	ExternalCommandRegistration	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalCommand\CS\ExternalCommandRegistration\ExternalCommandClass.cs	42	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ExternalCommandRegistration	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalCommand\CS\ExternalCommandRegistration\ExternalCommandClass.cs	43	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ExternalCommandRegistration	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalCommand\CS\ExternalCommandRegistration\ExternalCommandClass.cs	77	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	ExternalCommandRegistration	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalCommand\CS\ExternalCommandRegistration\ExternalCommandClass.cs	77	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ExternalCommandRegistration	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalCommand\CS\ExternalCommandRegistration\ExternalCommandClass.cs	78	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	ExternalCommandRegistration	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalCommand\CS\ExternalCommandRegistration\ExternalCommandClass.cs	78	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	ExternalCommandRegistration	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalCommand\CS\ExternalCommandRegistration\ExternalCommandClass.cs	79	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	ExternalCommandRegistration	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalCommand\CS\ExternalCommandRegistration\ExternalCommandClass.cs	83	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	ExternalCommandRegistration	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalCommand\CS\ExternalCommandRegistration\ExternalCommandClass.cs	83	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ExternalCommandRegistration	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalCommand\CS\ExternalCommandRegistration\ExternalCommandClass.cs	84	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ExternalCommandRegistration	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalCommand\CS\ExternalCommandRegistration\ExternalCommandClass.cs	98	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	ExternalCommandRegistration	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalCommand\CS\ExternalCommandRegistration\ExternalCommandClass.cs	98	Active
Error	CS0246	The type or namespace name 'IExternalApplication' could not be found (are you missing a using directive or an assembly reference?)	ExternalCommandRegistration	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalCommand\CS\ExternalCommandRegistration\ExternalCommandClass.cs	99	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	ExternalCommandRegistration	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalCommand\CS\ExternalCommandRegistration\ExternalCommandClass.cs	103	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	ExternalCommandRegistration	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalCommand\CS\ExternalCommandRegistration\ExternalCommandClass.cs	103	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	ExternalCommandRegistration	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalCommand\CS\ExternalCommandRegistration\ExternalCommandClass.cs	109	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	ExternalCommandRegistration	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalCommand\CS\ExternalCommandRegistration\ExternalCommandClass.cs	109	Active
Error	CS0006	Metadata file 'Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceDBServer\CS\bin\Debug\ExternalResourceDBServer.dll' could not be found	ExternalResourceUIServer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceUIServer\CS\CSC	1	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\Ancillaries.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\Ancillaries.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\Ancillaries.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\Ancillaries.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\Ancillaries.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\Ancillaries.cs	39	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\Ancillaries.cs	39	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\Ancillaries.cs	40	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\Ancillaries.cs	40	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\Ancillaries.cs	41	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\Ancillaries.cs	59	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\Ancillaries.cs	59	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\Ancillaries.cs	60	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ButtonGroupExclusions.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ButtonGroupExclusions.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ButtonGroupExclusions.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ButtonGroupExclusions.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ButtonGroupExclusions.cs	38	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ButtonGroupExclusions.cs	38	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ButtonGroupExclusions.cs	39	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ButtonGroupExclusions.cs	39	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ButtonGroupExclusions.cs	40	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ButtonGroupExclusions.cs	58	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ButtonGroupExclusions.cs	58	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ButtonGroupExclusions.cs	59	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ChangeService.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ChangeService.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ChangeService.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ChangeService.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ChangeService.cs	38	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ChangeService.cs	38	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ChangeService.cs	39	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ChangeService.cs	39	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ChangeService.cs	40	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ChangeService.cs	58	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ChangeService.cs	58	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ChangeService.cs	59	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ChangeService.cs	124	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ChangeService.cs	124	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ChangeService.cs	125	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ChangeService.cs	125	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ChangeService.cs	126	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ChangeService.cs	144	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ChangeService.cs	144	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ChangeService.cs	145	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ChangeService.cs	226	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ChangeService.cs	226	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ChangeService.cs	227	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ChangeService.cs	227	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ChangeService.cs	228	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ChangeService.cs	246	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ChangeService.cs	246	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ChangeService.cs	247	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ConvertToFabrication.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ConvertToFabrication.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ConvertToFabrication.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ConvertToFabrication.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ConvertToFabrication.cs	38	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ConvertToFabrication.cs	38	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ConvertToFabrication.cs	39	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ConvertToFabrication.cs	39	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ConvertToFabrication.cs	40	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ConvertToFabrication.cs	58	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ConvertToFabrication.cs	58	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ConvertToFabrication.cs	59	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\CustomData.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\CustomData.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\CustomData.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\CustomData.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\CustomData.cs	32	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\CustomData.cs	49	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\CustomData.cs	49	Active
Error	CS0246	The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\CustomData.cs	49	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\CustomData.cs	178	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\CustomData.cs	178	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\CustomData.cs	179	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\CustomData.cs	179	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\CustomData.cs	180	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\CustomData.cs	198	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\CustomData.cs	198	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\CustomData.cs	199	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\CustomData.cs	212	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\CustomData.cs	212	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\CustomData.cs	213	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\CustomData.cs	213	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\CustomData.cs	214	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\CustomData.cs	232	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\CustomData.cs	232	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\CustomData.cs	233	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ExportToMAJ.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ExportToMAJ.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ExportToMAJ.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ExportToMAJ.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ExportToMAJ.cs	40	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ExportToMAJ.cs	40	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ExportToMAJ.cs	41	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ExportToMAJ.cs	41	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ExportToMAJ.cs	42	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ExportToMAJ.cs	60	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ExportToMAJ.cs	60	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ExportToMAJ.cs	61	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ExportToPCF.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ExportToPCF.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ExportToPCF.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ExportToPCF.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ExportToPCF.cs	41	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ExportToPCF.cs	41	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ExportToPCF.cs	42	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ExportToPCF.cs	42	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ExportToPCF.cs	43	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ExportToPCF.cs	61	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ExportToPCF.cs	61	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ExportToPCF.cs	62	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabPartGeometry.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabPartGeometry.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabPartGeometry.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabPartGeometry.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabPartGeometry.cs	41	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabPartGeometry.cs	41	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabPartGeometry.cs	42	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabPartGeometry.cs	42	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabPartGeometry.cs	43	Active
Error	CS0246	The type or namespace name 'Mesh' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabPartGeometry.cs	45	Active
Error	CS0246	The type or namespace name 'GeometryElement' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabPartGeometry.cs	45	Active
Error	CS0246	The type or namespace name 'Mesh' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabPartGeometry.cs	70	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabPartGeometry.cs	118	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabPartGeometry.cs	118	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabPartGeometry.cs	119	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabricationPartLayout.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabricationPartLayout.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabricationPartLayout.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabricationPartLayout.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabricationPartLayout.cs	39	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabricationPartLayout.cs	39	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabricationPartLayout.cs	40	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabricationPartLayout.cs	40	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabricationPartLayout.cs	41	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabricationPartLayout.cs	43	Active
Error	CS0246	The type or namespace name 'FabricationService' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabricationPartLayout.cs	44	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabricationPartLayout.cs	82	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabricationPartLayout.cs	82	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabricationPartLayout.cs	83	Active
Error	CS0246	The type or namespace name 'FabricationPart' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabricationPartLayout.cs	633	Active
Error	CS0246	The type or namespace name 'FabricationPart' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabricationPartLayout.cs	667	Active
Error	CS0246	The type or namespace name 'Connector' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabricationPartLayout.cs	704	Active
Error	CS0246	The type or namespace name 'Connector' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabricationPartLayout.cs	704	Active
Error	CS0246	The type or namespace name 'Connector' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabricationPartLayout.cs	748	Active
Error	CS0246	The type or namespace name 'Connector' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabricationPartLayout.cs	748	Active
Error	CS0246	The type or namespace name 'FabricationPartJustification' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabricationPartLayout.cs	748	Active
Error	CS0246	The type or namespace name 'FabricationServiceButton' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabricationPartLayout.cs	784	Active
Error	CS0246	The type or namespace name 'FabricationService' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabricationPartLayout.cs	784	Active
Error	CS0246	The type or namespace name 'FabricationPart' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabricationPartLayout.cs	819	Active
Error	CS0246	The type or namespace name 'FabricationServiceButton' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabricationPartLayout.cs	819	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabricationPartLayout.cs	819	Active
Error	CS0246	The type or namespace name 'Connector' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabricationPartLayout.cs	843	Active
Error	CS0246	The type or namespace name 'ConnectorManager' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabricationPartLayout.cs	843	Active
Error	CS0246	The type or namespace name 'Connector' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabricationPartLayout.cs	863	Active
Error	CS0246	The type or namespace name 'ConnectorManager' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabricationPartLayout.cs	863	Active
Error	CS0246	The type or namespace name 'Connector' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabricationPartLayout.cs	883	Active
Error	CS0246	The type or namespace name 'ConnectorManager' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabricationPartLayout.cs	883	Active
Error	CS0246	The type or namespace name 'FabricationConfiguration' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabricationPartLayout.cs	905	Active
Error	CS0246	The type or namespace name 'FabricationConfiguration' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabricationPartLayout.cs	930	Active
Error	CS0246	The type or namespace name 'FabricationConfiguration' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabricationPartLayout.cs	955	Active
Error	CS0246	The type or namespace name 'FabricationConfiguration' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabricationPartLayout.cs	980	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\HangerRods.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\HangerRods.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\HangerRods.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\HangerRods.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\HangerRods.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\HangerRods.cs	41	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\HangerRods.cs	41	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\HangerRods.cs	42	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\HangerRods.cs	42	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\HangerRods.cs	43	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\HangerRods.cs	61	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\HangerRods.cs	61	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\HangerRods.cs	62	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\HangerRods.cs	104	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\HangerRods.cs	104	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\HangerRods.cs	105	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\HangerRods.cs	105	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\HangerRods.cs	106	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\HangerRods.cs	124	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\HangerRods.cs	124	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\HangerRods.cs	125	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\HangerRods.cs	176	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\HangerRods.cs	176	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\HangerRods.cs	177	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\HangerRods.cs	177	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\HangerRods.cs	178	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\HangerRods.cs	196	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\HangerRods.cs	196	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\HangerRods.cs	197	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\HangerRods.cs	248	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\HangerRods.cs	248	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\HangerRods.cs	249	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\HangerRods.cs	249	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\HangerRods.cs	250	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\HangerRods.cs	268	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\HangerRods.cs	268	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\HangerRods.cs	269	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\HangerRods.cs	320	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\HangerRods.cs	320	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\HangerRods.cs	321	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\HangerRods.cs	321	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\HangerRods.cs	322	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\HangerRods.cs	340	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\HangerRods.cs	340	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\HangerRods.cs	341	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ItemFile.cs	1	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ItemFile.cs	2	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ItemFile.cs	14	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ItemFile.cs	14	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ItemFile.cs	15	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ItemFile.cs	15	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ItemFile.cs	16	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ItemFile.cs	34	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ItemFile.cs	34	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ItemFile.cs	35	Active
Error	CS0246	The type or namespace name 'FabricationItemFile' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ItemFile.cs	132	Active
Error	CS0246	The type or namespace name 'FabricationItemFolder' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ItemFile.cs	132	Active
Error	CS0246	The type or namespace name 'FabricationItemFile' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ItemFile.cs	147	Active
Error	CS0246	The type or namespace name 'FabricationItemFolder' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ItemFile.cs	147	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ItemFile.cs	180	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ItemFile.cs	180	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ItemFile.cs	181	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ItemFile.cs	181	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ItemFile.cs	182	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ItemFile.cs	200	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ItemFile.cs	200	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ItemFile.cs	201	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\OptimizeStraights.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\OptimizeStraights.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\OptimizeStraights.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\OptimizeStraights.cs	37	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\OptimizeStraights.cs	37	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\OptimizeStraights.cs	38	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\OptimizeStraights.cs	38	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\OptimizeStraights.cs	39	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\OptimizeStraights.cs	57	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\OptimizeStraights.cs	57	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\OptimizeStraights.cs	58	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\PartInfo.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\PartInfo.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\PartInfo.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\PartInfo.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\PartInfo.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\PartInfo.cs	40	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\PartInfo.cs	40	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\PartInfo.cs	41	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\PartInfo.cs	41	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\PartInfo.cs	42	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\PartInfo.cs	60	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\PartInfo.cs	60	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\PartInfo.cs	61	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\PartInfo.cs	155	Active
Error	CS0246	The type or namespace name 'ForgeTypeId' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\PartInfo.cs	155	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\PartRenumber.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\PartRenumber.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\PartRenumber.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\PartRenumber.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\PartRenumber.cs	39	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\PartRenumber.cs	39	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\PartRenumber.cs	40	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\PartRenumber.cs	40	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\PartRenumber.cs	41	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\PartRenumber.cs	68	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\PartRenumber.cs	68	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\PartRenumber.cs	69	Active
Error	CS0246	The type or namespace name 'FabricationPart' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\PartRenumber.cs	175	Active
Error	CS0246	The type or namespace name 'FabricationPart' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\PartRenumber.cs	185	Active
Error	CS0246	The type or namespace name 'FabricationPart' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\PartRenumber.cs	201	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\SplitStraight.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\SplitStraight.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\SplitStraight.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\SplitStraight.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\SplitStraight.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\SplitStraight.cs	40	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\SplitStraight.cs	40	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\SplitStraight.cs	41	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\SplitStraight.cs	41	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\SplitStraight.cs	42	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\SplitStraight.cs	60	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\SplitStraight.cs	60	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\SplitStraight.cs	61	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\StretchAndFit.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\StretchAndFit.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\StretchAndFit.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\StretchAndFit.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\StretchAndFit.cs	38	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\StretchAndFit.cs	38	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\StretchAndFit.cs	39	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\StretchAndFit.cs	39	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\StretchAndFit.cs	40	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\StretchAndFit.cs	58	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\StretchAndFit.cs	58	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\StretchAndFit.cs	59	Active
Error	CS0246	The type or namespace name 'Connector' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\StretchAndFit.cs	125	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\StretchAndFit.cs	125	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\StretchAndFit.cs	125	Active
Error	CS0246	The type or namespace name 'Connector' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\StretchAndFit.cs	152	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\StretchAndFit.cs	152	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	FabricationPartLayout	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\StretchAndFit.cs	152	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FamilyParametersOrder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyParametersOrder\CS\Command.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FamilyParametersOrder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyParametersOrder\CS\Command.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FamilyParametersOrder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyParametersOrder\CS\Command.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FamilyParametersOrder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyParametersOrder\CS\Command.cs	38	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	FamilyParametersOrder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyParametersOrder\CS\Command.cs	38	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FamilyParametersOrder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyParametersOrder\CS\Command.cs	39	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	FamilyParametersOrder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyParametersOrder\CS\Command.cs	39	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FamilyParametersOrder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyParametersOrder\CS\Command.cs	40	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	FamilyParametersOrder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyParametersOrder\CS\Command.cs	40	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	FamilyParametersOrder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyParametersOrder\CS\Command.cs	41	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	FamilyParametersOrder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyParametersOrder\CS\Command.cs	65	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	FamilyParametersOrder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyParametersOrder\CS\Command.cs	65	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	FamilyParametersOrder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyParametersOrder\CS\Command.cs	66	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FamilyParametersOrder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyParametersOrder\CS\ExternalApplication.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FamilyParametersOrder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyParametersOrder\CS\ExternalApplication.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FamilyParametersOrder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyParametersOrder\CS\ExternalApplication.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FamilyParametersOrder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyParametersOrder\CS\ExternalApplication.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FamilyParametersOrder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyParametersOrder\CS\ExternalApplication.cs	42	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	FamilyParametersOrder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyParametersOrder\CS\ExternalApplication.cs	42	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FamilyParametersOrder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyParametersOrder\CS\ExternalApplication.cs	43	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	FamilyParametersOrder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyParametersOrder\CS\ExternalApplication.cs	43	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FamilyParametersOrder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyParametersOrder\CS\ExternalApplication.cs	44	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	FamilyParametersOrder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyParametersOrder\CS\ExternalApplication.cs	44	Active
Error	CS0246	The type or namespace name 'IExternalApplication' could not be found (are you missing a using directive or an assembly reference?)	FamilyParametersOrder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyParametersOrder\CS\ExternalApplication.cs	45	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FamilyParametersOrder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyParametersOrder\CS\ExternalApplication.cs	61	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	FamilyParametersOrder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyParametersOrder\CS\ExternalApplication.cs	61	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FamilyParametersOrder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyParametersOrder\CS\ExternalApplication.cs	87	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	FamilyParametersOrder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyParametersOrder\CS\ExternalApplication.cs	87	Active
Error	CS0246	The type or namespace name 'DocumentOpenedEventArgs' could not be found (are you missing a using directive or an assembly reference?)	FamilyParametersOrder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyParametersOrder\CS\ExternalApplication.cs	100	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FamilyParametersOrder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyParametersOrder\CS\SortFamilyFilesParamsForm.cs	34	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FamilyParametersOrder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyParametersOrder\CS\SortFamilyFilesParamsForm.cs	35	Active
Error	CS0246	The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)	FamilyParametersOrder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyParametersOrder\CS\SortFamilyFilesParamsForm.cs	51	Active
Error	CS0246	The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)	FamilyParametersOrder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyParametersOrder\CS\SortFamilyFilesParamsForm.cs	57	Active
Error	CS0246	The type or namespace name 'ParametersOrder' could not be found (are you missing a using directive or an assembly reference?)	FamilyParametersOrder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyParametersOrder\CS\SortFamilyFilesParamsForm.cs	76	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FamilyParametersOrder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyParametersOrder\CS\SortLoadedFamiliesParamsForm.cs	34	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FamilyParametersOrder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyParametersOrder\CS\SortLoadedFamiliesParamsForm.cs	35	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	FamilyParametersOrder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyParametersOrder\CS\SortLoadedFamiliesParamsForm.cs	52	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	FamilyParametersOrder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyParametersOrder\CS\SortLoadedFamiliesParamsForm.cs	58	Active
Error	CS0246	The type or namespace name 'ParametersOrder' could not be found (are you missing a using directive or an assembly reference?)	FamilyParametersOrder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyParametersOrder\CS\SortLoadedFamiliesParamsForm.cs	68	Active
Error	CS0246	The type or namespace name 'IFamilyLoadOptions' could not be found (are you missing a using directive or an assembly reference?)	FamilyParametersOrder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyParametersOrder\CS\SortLoadedFamiliesParamsForm.cs	150	Active
Error	CS0246	The type or namespace name 'Family' could not be found (are you missing a using directive or an assembly reference?)	FamilyParametersOrder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyParametersOrder\CS\SortLoadedFamiliesParamsForm.cs	158	Active
Error	CS0246	The type or namespace name 'FamilySource' could not be found (are you missing a using directive or an assembly reference?)	FamilyParametersOrder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyParametersOrder\CS\SortLoadedFamiliesParamsForm.cs	158	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FindColumns	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\FindColumns\CS\FindColumns.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FindColumns	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\FindColumns\CS\FindColumns.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FindColumns	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\FindColumns\CS\FindColumns.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FindColumns	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\FindColumns\CS\FindColumns.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FindColumns	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\FindColumns\CS\FindColumns.cs	37	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	FindColumns	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\FindColumns\CS\FindColumns.cs	37	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FindColumns	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\FindColumns\CS\FindColumns.cs	38	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	FindColumns	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\FindColumns\CS\FindColumns.cs	38	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	FindColumns	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\FindColumns\CS\FindColumns.cs	39	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	FindColumns	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\FindColumns\CS\FindColumns.cs	55	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	FindColumns	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\FindColumns\CS\FindColumns.cs	55	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	FindColumns	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\FindColumns\CS\FindColumns.cs	60	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FindColumns	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\FindColumns\CS\FindColumns.cs	65	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FindColumns	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\FindColumns\CS\FindColumns.cs	70	Active
Error	CS0246	The type or namespace name 'View3D' could not be found (are you missing a using directive or an assembly reference?)	FindColumns	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\FindColumns\CS\FindColumns.cs	75	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FindColumns	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\FindColumns\CS\FindColumns.cs	95	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	FindColumns	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\FindColumns\CS\FindColumns.cs	95	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FindColumns	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\FindColumns\CS\FindColumns.cs	97	Active
Error	CS0246	The type or namespace name 'Wall' could not be found (are you missing a using directive or an assembly reference?)	FindColumns	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\FindColumns\CS\FindColumns.cs	162	Active
Error	CS0246	The type or namespace name 'Wall' could not be found (are you missing a using directive or an assembly reference?)	FindColumns	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\FindColumns\CS\FindColumns.cs	174	Active
Error	CS0246	The type or namespace name 'Wall' could not be found (are you missing a using directive or an assembly reference?)	FindColumns	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\FindColumns\CS\FindColumns.cs	195	Active
Error	CS0246	The type or namespace name 'LocationCurve' could not be found (are you missing a using directive or an assembly reference?)	FindColumns	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\FindColumns\CS\FindColumns.cs	195	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	FindColumns	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\FindColumns\CS\FindColumns.cs	195	Active
Error	CS0246	The type or namespace name 'Wall' could not be found (are you missing a using directive or an assembly reference?)	FindColumns	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\FindColumns\CS\FindColumns.cs	211	Active
Error	CS0246	The type or namespace name 'LocationCurve' could not be found (are you missing a using directive or an assembly reference?)	FindColumns	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\FindColumns\CS\FindColumns.cs	211	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	FindColumns	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\FindColumns\CS\FindColumns.cs	211	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	FindColumns	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\FindColumns\CS\FindColumns.cs	232	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	FindColumns	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\FindColumns\CS\FindColumns.cs	232	Active
Error	CS0246	The type or namespace name 'Wall' could not be found (are you missing a using directive or an assembly reference?)	FindColumns	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\FindColumns\CS\FindColumns.cs	232	Active
Error	CS0246	The type or namespace name 'Wall' could not be found (are you missing a using directive or an assembly reference?)	FindColumns	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\FindColumns\CS\FindColumns.cs	245	Active
Error	CS0246	The type or namespace name 'LocationCurve' could not be found (are you missing a using directive or an assembly reference?)	FindColumns	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\FindColumns\CS\FindColumns.cs	245	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	FindColumns	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\FindColumns\CS\FindColumns.cs	245	Active
Error	CS0246	The type or namespace name 'Wall' could not be found (are you missing a using directive or an assembly reference?)	FindColumns	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\FindColumns\CS\FindColumns.cs	269	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	FindColumns	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\FindColumns\CS\FindColumns.cs	286	Active
Error	CS0246	The type or namespace name 'Wall' could not be found (are you missing a using directive or an assembly reference?)	FindColumns	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\FindColumns\CS\FindColumns.cs	286	Active
Error	CS0246	The type or namespace name 'LocationCurve' could not be found (are you missing a using directive or an assembly reference?)	FindColumns	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\FindColumns\CS\FindColumns.cs	286	Active
Error	CS0246	The type or namespace name 'ReferenceWithContext' could not be found (are you missing a using directive or an assembly reference?)	FindColumns	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\FindColumns\CS\FindColumns.cs	304	Active
Error	CS0246	The type or namespace name 'Wall' could not be found (are you missing a using directive or an assembly reference?)	FindColumns	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\FindColumns\CS\FindColumns.cs	304	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	FindColumns	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\FindColumns\CS\FindColumns.cs	348	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	FindColumns	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\FindColumns\CS\FindColumns.cs	348	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	FindColumns	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\FindColumns\CS\FindColumns.cs	362	Active
Error	CS0246	The type or namespace name 'Wall' could not be found (are you missing a using directive or an assembly reference?)	FindColumns	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\FindColumns\CS\FindColumns.cs	362	Active
Error	CS0246	The type or namespace name 'LocationCurve' could not be found (are you missing a using directive or an assembly reference?)	FindColumns	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\FindColumns\CS\FindColumns.cs	362	Active
Error	CS0246	The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)	FindColumns	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\FindColumns\CS\FindColumns.cs	385	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	FindColumns	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\FindColumns\CS\FindColumns.cs	398	Active
Error	BC40056	Namespace or type specified in the Imports 'Autodesk.Revit' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.	FireRating	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ApplyParameter.vb	22	Active
Error	BC40056	Namespace or type specified in the Imports 'Autodesk.Revit.UI' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.	FireRating	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ApplyParameter.vb	23	Active
Error	BC30002	Type 'Autodesk.Revit.Attributes.Transaction' is not defined.	FireRating	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ApplyParameter.vb	25	Active
Error	BC30451	'Autodesk' is not declared. It may be inaccessible due to its protection level.	FireRating	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ApplyParameter.vb	25	Active
Error	BC30002	Type 'Autodesk.Revit.Attributes.Regeneration' is not defined.	FireRating	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ApplyParameter.vb	26	Active
Error	BC30451	'Autodesk' is not declared. It may be inaccessible due to its protection level.	FireRating	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ApplyParameter.vb	26	Active
Error	BC30002	Type 'Autodesk.Revit.Attributes.Journaling' is not defined.	FireRating	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ApplyParameter.vb	27	Active
Error	BC30451	'Autodesk' is not declared. It may be inaccessible due to its protection level.	FireRating	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ApplyParameter.vb	27	Active
Error	BC30002	Type 'Autodesk.Revit.UI.IExternalCommand' is not defined.	FireRating	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ApplyParameter.vb	30	Active
Error	BC30002	Type 'ExternalCommandData' is not defined.	FireRating	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ApplyParameter.vb	48	Active
Error	BC30002	Type 'Autodesk.Revit.DB.ElementSet' is not defined.	FireRating	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ApplyParameter.vb	48	Active
Error	BC30002	Type 'Autodesk.Revit.UI.Result' is not defined.	FireRating	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ApplyParameter.vb	48	Active
Error	BC30002	Type 'Autodesk.Revit.UI.IExternalCommand' is not defined.	FireRating	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ApplyParameter.vb	48	Active
Error	BC30002	Type 'Autodesk.Revit.ApplicationServices.Application' is not defined.	FireRating	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ApplyParameter.vb	90	Active
Error	BC30002	Type 'Autodesk.Revit.DB.DefinitionFile' is not defined.	FireRating	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ApplyParameter.vb	90	Active
Error	BC30002	Type 'Autodesk.Revit.DB.DefinitionFile' is not defined.	FireRating	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ApplyParameter.vb	112	Active
Error	BC30002	Type 'Autodesk.Revit.DB.DefinitionGroup' is not defined.	FireRating	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ApplyParameter.vb	112	Active
Error	BC30002	Type 'Autodesk.Revit.DB.DefinitionGroup' is not defined.	FireRating	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ApplyParameter.vb	124	Active
Error	BC30002	Type 'Autodesk.Revit.DB.Definition' is not defined.	FireRating	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ApplyParameter.vb	124	Active
Error	BC40056	Namespace or type specified in the Imports 'Autodesk.Revit' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.	FireRating	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ExportFireRating.vb	23	Active
Error	BC40056	Namespace or type specified in the Imports 'Autodesk.Revit.DB' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.	FireRating	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ExportFireRating.vb	24	Active
Error	BC40056	Namespace or type specified in the Imports 'Autodesk.Revit.UI' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.	FireRating	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ExportFireRating.vb	25	Active
Error	BC30002	Type 'Autodesk.Revit.Attributes.Transaction' is not defined.	FireRating	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ExportFireRating.vb	28	Active
Error	BC30451	'Autodesk' is not declared. It may be inaccessible due to its protection level.	FireRating	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ExportFireRating.vb	28	Active
Error	BC30002	Type 'Autodesk.Revit.Attributes.Regeneration' is not defined.	FireRating	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ExportFireRating.vb	29	Active
Error	BC30451	'Autodesk' is not declared. It may be inaccessible due to its protection level.	FireRating	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ExportFireRating.vb	29	Active
Error	BC30002	Type 'Autodesk.Revit.Attributes.Journaling' is not defined.	FireRating	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ExportFireRating.vb	30	Active
Error	BC30451	'Autodesk' is not declared. It may be inaccessible due to its protection level.	FireRating	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ExportFireRating.vb	30	Active
Error	BC30002	Type 'Autodesk.Revit.UI.IExternalCommand' is not defined.	FireRating	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ExportFireRating.vb	33	Active
Error	BC30002	Type 'ExternalCommandData' is not defined.	FireRating	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ExportFireRating.vb	51	Active
Error	BC30002	Type 'Autodesk.Revit.DB.ElementSet' is not defined.	FireRating	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ExportFireRating.vb	51	Active
Error	BC30002	Type 'Autodesk.Revit.UI.Result' is not defined.	FireRating	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ExportFireRating.vb	51	Active
Error	BC30002	Type 'Autodesk.Revit.UI.IExternalCommand' is not defined.	FireRating	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ExportFireRating.vb	51	Active
Error	BC30002	Type 'Autodesk.Revit.ApplicationServices.Application' is not defined.	FireRating	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ExportFireRating.vb	91	Active
Error	BC30002	Type 'Autodesk.Revit.ApplicationServices.Application' is not defined.	FireRating	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ExportFireRating.vb	138	Active
Error	BC30002	Type 'Autodesk.Revit.DB.ElementSet' is not defined.	FireRating	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ExportFireRating.vb	138	Active
Error	BC40056	Namespace or type specified in the Imports 'Autodesk.Revit' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.	FireRating	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ImportFireRating.vb	23	Active
Error	BC40056	Namespace or type specified in the Imports 'Autodesk.Revit.DB' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.	FireRating	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ImportFireRating.vb	24	Active
Error	BC40056	Namespace or type specified in the Imports 'Autodesk.Revit.UI' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.	FireRating	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ImportFireRating.vb	25	Active
Error	BC30002	Type 'Autodesk.Revit.Attributes.Transaction' is not defined.	FireRating	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ImportFireRating.vb	28	Active
Error	BC30451	'Autodesk' is not declared. It may be inaccessible due to its protection level.	FireRating	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ImportFireRating.vb	28	Active
Error	BC30002	Type 'Autodesk.Revit.Attributes.Regeneration' is not defined.	FireRating	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ImportFireRating.vb	29	Active
Error	BC30451	'Autodesk' is not declared. It may be inaccessible due to its protection level.	FireRating	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ImportFireRating.vb	29	Active
Error	BC30002	Type 'Autodesk.Revit.Attributes.Journaling' is not defined.	FireRating	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ImportFireRating.vb	30	Active
Error	BC30451	'Autodesk' is not declared. It may be inaccessible due to its protection level.	FireRating	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ImportFireRating.vb	30	Active
Error	BC30002	Type 'Autodesk.Revit.UI.IExternalCommand' is not defined.	FireRating	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ImportFireRating.vb	34	Active
Error	BC30002	Type 'ExternalCommandData' is not defined.	FireRating	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ImportFireRating.vb	52	Active
Error	BC30002	Type 'Autodesk.Revit.DB.ElementSet' is not defined.	FireRating	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ImportFireRating.vb	52	Active
Error	BC30002	Type 'Autodesk.Revit.UI.Result' is not defined.	FireRating	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ImportFireRating.vb	52	Active
Error	BC30002	Type 'Autodesk.Revit.UI.IExternalCommand' is not defined.	FireRating	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ImportFireRating.vb	52	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FoundationSlab	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\Command.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FoundationSlab	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\Command.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FoundationSlab	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\Command.cs	35	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	FoundationSlab	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\Command.cs	35	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FoundationSlab	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\Command.cs	36	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	FoundationSlab	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\Command.cs	36	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FoundationSlab	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\Command.cs	37	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	FoundationSlab	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\Command.cs	37	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	FoundationSlab	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\Command.cs	38	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FoundationSlab	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\Command.cs	57	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	FoundationSlab	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\Command.cs	57	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FoundationSlab	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\Command.cs	57	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FoundationSlab	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\RegularSlab.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FoundationSlab	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\RegularSlab.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FoundationSlab	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\RegularSlab.cs	29	Active
Error	CS0246	The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)	FoundationSlab	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\RegularSlab.cs	40	Active
Error	CS0246	The type or namespace name 'ElementType' could not be found (are you missing a using directive or an assembly reference?)	FoundationSlab	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\RegularSlab.cs	41	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FoundationSlab	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\RegularSlab.cs	43	Active
Error	CS0246	The type or namespace name 'CurveArray' could not be found (are you missing a using directive or an assembly reference?)	FoundationSlab	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\RegularSlab.cs	44	Active
Error	CS0246	The type or namespace name 'CurveArray' could not be found (are you missing a using directive or an assembly reference?)	FoundationSlab	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\RegularSlab.cs	45	Active
Error	CS0246	The type or namespace name 'BoundingBoxXYZ' could not be found (are you missing a using directive or an assembly reference?)	FoundationSlab	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\RegularSlab.cs	46	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FoundationSlab	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\RegularSlab.cs	84	Active
Error	CS0246	The type or namespace name 'CurveArray' could not be found (are you missing a using directive or an assembly reference?)	FoundationSlab	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\RegularSlab.cs	92	Active
Error	CS0246	The type or namespace name 'CurveArray' could not be found (are you missing a using directive or an assembly reference?)	FoundationSlab	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\RegularSlab.cs	100	Active
Error	CS0246	The type or namespace name 'BoundingBoxXYZ' could not be found (are you missing a using directive or an assembly reference?)	FoundationSlab	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\RegularSlab.cs	108	Active
Error	CS0246	The type or namespace name 'Floor' could not be found (are you missing a using directive or an assembly reference?)	FoundationSlab	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\RegularSlab.cs	119	Active
Error	CS0246	The type or namespace name 'CurveArray' could not be found (are you missing a using directive or an assembly reference?)	FoundationSlab	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\RegularSlab.cs	119	Active
Error	CS0246	The type or namespace name 'BoundingBoxXYZ' could not be found (are you missing a using directive or an assembly reference?)	FoundationSlab	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\RegularSlab.cs	119	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FoundationSlab	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\RegularSlab.cs	150	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FoundationSlab	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\RegularSlab.cs	150	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FoundationSlab	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\Sketch.cs	31	Active
Error	CS0246	The type or namespace name 'CurveArray' could not be found (are you missing a using directive or an assembly reference?)	FoundationSlab	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\Sketch.cs	90	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FoundationSlab	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\SlabData.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FoundationSlab	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\SlabData.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FoundationSlab	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\SlabData.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FoundationSlab	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\SlabData.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FoundationSlab	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\SlabData.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FoundationSlab	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\SlabData.cs	44	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FoundationSlab	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\SlabData.cs	45	Active
Error	CS0246	The type or namespace name 'FloorType' could not be found (are you missing a using directive or an assembly reference?)	FoundationSlab	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\SlabData.cs	47	Active
Error	CS0246	The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)	FoundationSlab	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\SlabData.cs	49	Active
Error	CS0246	The type or namespace name 'View' could not be found (are you missing a using directive or an assembly reference?)	FoundationSlab	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\SlabData.cs	51	Active
Error	CS0246	The type or namespace name 'Floor' could not be found (are you missing a using directive or an assembly reference?)	FoundationSlab	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\SlabData.cs	53	Active
Error	CS0246	The type or namespace name 'FloorType' could not be found (are you missing a using directive or an assembly reference?)	FoundationSlab	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\SlabData.cs	61	Active
Error	CS0246	The type or namespace name 'FloorType' could not be found (are you missing a using directive or an assembly reference?)	FoundationSlab	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\SlabData.cs	76	Active
Error	CS0246	The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)	FoundationSlab	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\SlabData.cs	94	Active
Error	CS0246	The type or namespace name 'BoundingBoxXYZ' could not be found (are you missing a using directive or an assembly reference?)	FoundationSlab	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\SlabData.cs	272	Active
Error	CS0246	The type or namespace name 'Floor' could not be found (are you missing a using directive or an assembly reference?)	FoundationSlab	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\SlabData.cs	272	Active
Error	CS0246	The type or namespace name 'CurveArray' could not be found (are you missing a using directive or an assembly reference?)	FoundationSlab	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\SlabData.cs	298	Active
Error	CS0246	The type or namespace name 'Floor' could not be found (are you missing a using directive or an assembly reference?)	FoundationSlab	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\SlabData.cs	298	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FrameBuilder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\Command.cs	22	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FrameBuilder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\Command.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FrameBuilder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\Command.cs	37	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	FrameBuilder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\Command.cs	37	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FrameBuilder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\Command.cs	38	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	FrameBuilder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\Command.cs	38	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FrameBuilder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\Command.cs	39	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	FrameBuilder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\Command.cs	39	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	FrameBuilder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\Command.cs	40	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FrameBuilder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\Command.cs	59	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	FrameBuilder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\Command.cs	59	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FrameBuilder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\Command.cs	60	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FrameBuilder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\CreateFrameForm.cs	34	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FrameBuilder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\CreateFrameForm.cs	35	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FrameBuilder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\DuplicateTypeForm.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FrameBuilder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\DuplicateTypeForm.cs	33	Active
Error	CS0246	The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)	FrameBuilder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\DuplicateTypeForm.cs	40	Active
Error	CS0246	The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)	FrameBuilder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\DuplicateTypeForm.cs	41	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FrameBuilder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameBuilder.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FrameBuilder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameBuilder.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FrameBuilder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameBuilder.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FrameBuilder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameBuilder.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FrameBuilder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameBuilder.cs	34	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FrameBuilder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameBuilder.cs	36	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FrameBuilder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameBuilder.cs	44	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FrameBuilder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameBuilder.cs	45	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FrameBuilder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameBuilder.cs	149	Active
Error	CS0246	The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)	FrameBuilder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameBuilder.cs	170	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FrameBuilder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameBuilder.cs	170	Active
Error	CS0246	The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)	FrameBuilder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameBuilder.cs	170	Active
Error	CS0246	The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)	FrameBuilder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameBuilder.cs	170	Active
Error	CS0246	The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)	FrameBuilder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameBuilder.cs	196	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FrameBuilder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameBuilder.cs	196	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FrameBuilder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameBuilder.cs	196	Active
Error	CS0246	The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)	FrameBuilder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameBuilder.cs	196	Active
Error	CS0246	The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)	FrameBuilder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameBuilder.cs	218	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FrameBuilder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameBuilder.cs	218	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FrameBuilder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameBuilder.cs	218	Active
Error	CS0246	The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)	FrameBuilder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameBuilder.cs	218	Active
Error	CS0246	The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)	FrameBuilder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameBuilder.cs	218	Active
Error	CS0246	The type or namespace name 'BuiltInParameter' could not be found (are you missing a using directive or an assembly reference?)	FrameBuilder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameBuilder.cs	253	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FrameBuilder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameBuilder.cs	253	Active
Error	CS0246	The type or namespace name 'BuiltInParameter' could not be found (are you missing a using directive or an assembly reference?)	FrameBuilder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameBuilder.cs	272	Active
Error	CS0246	The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)	FrameBuilder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameBuilder.cs	288	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	FrameBuilder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameBuilder.cs	305	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FrameBuilder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameBuilder.cs	305	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FrameBuilder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameBuilder.cs	305	Active
Error	CS0246	The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)	FrameBuilder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameBuilder.cs	320	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FrameBuilder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameBuilder.cs	320	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FrameBuilder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameBuilder.cs	320	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FrameBuilder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameData.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FrameBuilder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameData.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FrameBuilder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameData.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FrameBuilder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameData.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FrameBuilder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameData.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FrameBuilder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameData.cs	61	Active
Error	CS0246	The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)	FrameBuilder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameData.cs	65	Active
Error	CS0246	The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)	FrameBuilder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameData.cs	66	Active
Error	CS0246	The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)	FrameBuilder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameData.cs	67	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	FrameBuilder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameData.cs	69	Active
Error	CS0246	The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)	FrameBuilder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameData.cs	72	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	FrameBuilder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameData.cs	77	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FrameBuilder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameData.cs	234	Active
Error	CS0246	The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)	FrameBuilder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameData.cs	264	Active
Error	CS0246	The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)	FrameBuilder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameData.cs	275	Active
Error	CS0246	The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)	FrameBuilder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameData.cs	286	Active
Error	CS0246	The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)	FrameBuilder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameData.cs	297	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	FrameBuilder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameData.cs	322	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	FrameBuilder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameData.cs	432	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FrameBuilder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameTypeParameters.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FrameBuilder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameTypeParameters.cs	32	Active
Error	CS0246	The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)	FrameBuilder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameTypeParameters.cs	39	Active
Error	CS0246	The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)	FrameBuilder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameTypeParameters.cs	40	Active
Error	CS0246	The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)	FrameBuilder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameTypeParameters.cs	85	Active
Error	CS0246	The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)	FrameBuilder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameTypeParameters.cs	109	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FrameBuilder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameTypesMgr.cs	22	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FrameBuilder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameTypesMgr.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FrameBuilder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameTypesMgr.cs	32	Active
Error	CS0246	The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)	FrameBuilder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameTypesMgr.cs	40	Active
Error	CS0246	The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)	FrameBuilder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameTypesMgr.cs	42	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	FrameBuilder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameTypesMgr.cs	43	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	FrameBuilder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameTypesMgr.cs	48	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	FrameBuilder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameTypesMgr.cs	71	Active
Error	CS0246	The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)	FrameBuilder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameTypesMgr.cs	88	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FrameBuilder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameTypesMgr.cs	101	Active
Error	CS0246	The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)	FrameBuilder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameTypesMgr.cs	116	Active
Error	CS0246	The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)	FrameBuilder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameTypesMgr.cs	143	Active
Error	CS0246	The type or namespace name 'ElementType' could not be found (are you missing a using directive or an assembly reference?)	FrameBuilder	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameTypesMgr.cs	143	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FreeFormElement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\Application.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FreeFormElement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\Application.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FreeFormElement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\Application.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FreeFormElement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\Application.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FreeFormElement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\Application.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FreeFormElement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\Application.cs	42	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	FreeFormElement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\Application.cs	42	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FreeFormElement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\Application.cs	43	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	FreeFormElement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\Application.cs	43	Active
Error	CS0246	The type or namespace name 'IExternalApplication' could not be found (are you missing a using directive or an assembly reference?)	FreeFormElement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\Application.cs	44	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	FreeFormElement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\Application.cs	52	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	FreeFormElement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\Application.cs	52	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	FreeFormElement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\Application.cs	62	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	FreeFormElement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\Application.cs	62	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	FreeFormElement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\Application.cs	75	Active
Error	CS0246	The type or namespace name 'PushButton' could not be found (are you missing a using directive or an assembly reference?)	FreeFormElement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\Application.cs	91	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FreeFormElement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\CreateNegativeBlockCommand.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FreeFormElement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\CreateNegativeBlockCommand.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FreeFormElement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\CreateNegativeBlockCommand.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FreeFormElement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\CreateNegativeBlockCommand.cs	38	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	FreeFormElement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\CreateNegativeBlockCommand.cs	38	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	FreeFormElement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\CreateNegativeBlockCommand.cs	39	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	FreeFormElement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\CreateNegativeBlockCommand.cs	43	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	FreeFormElement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\CreateNegativeBlockCommand.cs	43	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FreeFormElement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\CreateNegativeBlockCommand.cs	43	Active
Error	CS0246	The type or namespace name 'ISelectionFilter' could not be found (are you missing a using directive or an assembly reference?)	FreeFormElement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\CreateNegativeBlockCommand.cs	99	Active
Error	CS0246	The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)	FreeFormElement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\CreateNegativeBlockCommand.cs	101	Active
Error	CS0246	The type or namespace name 'Reference' could not be found (are you missing a using directive or an assembly reference?)	FreeFormElement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\CreateNegativeBlockCommand.cs	109	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	FreeFormElement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\CreateNegativeBlockCommand.cs	109	Active
Error	CS0246	The type or namespace name 'ISelectionFilter' could not be found (are you missing a using directive or an assembly reference?)	FreeFormElement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\CreateNegativeBlockCommand.cs	118	Active
Error	CS0246	The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)	FreeFormElement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\CreateNegativeBlockCommand.cs	120	Active
Error	CS0246	The type or namespace name 'Reference' could not be found (are you missing a using directive or an assembly reference?)	FreeFormElement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\CreateNegativeBlockCommand.cs	137	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	FreeFormElement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\CreateNegativeBlockCommand.cs	137	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FreeFormElement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\FreeFormElementUtils.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	FreeFormElement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\FreeFormElementUtils.cs	30	Active
Error	CS0246	The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)	FreeFormElement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\FreeFormElementUtils.cs	55	Active
Error	CS0246	The type or namespace name 'Reference' could not be found (are you missing a using directive or an assembly reference?)	FreeFormElement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\FreeFormElementUtils.cs	55	Active
Error	CS0246	The type or namespace name 'IFamilyLoadOptions' could not be found (are you missing a using directive or an assembly reference?)	FreeFormElement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\FreeFormElementUtils.cs	55	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	FreeFormElement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\FreeFormElementUtils.cs	169	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	FreeFormElement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\FreeFormElementUtils.cs	169	Active
Error	CS0246	The type or namespace name 'Reference' could not be found (are you missing a using directive or an assembly reference?)	FreeFormElement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\FreeFormElementUtils.cs	169	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	FreeFormElement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\FreeFormElementUtils.cs	217	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	FreeFormElement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\FreeFormElementUtils.cs	217	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	FreeFormElement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\FreeFormElementUtils.cs	244	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	FreeFormElement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\FreeFormElementUtils.cs	254	Active
Error	CS0246	The type or namespace name 'Solid' could not be found (are you missing a using directive or an assembly reference?)	FreeFormElement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\FreeFormElementUtils.cs	284	Active
Error	CS0246	The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)	FreeFormElement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\FreeFormElementUtils.cs	284	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GenerateFloor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenerateFloor\CS\Command.cs	25	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GenerateFloor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenerateFloor\CS\Command.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GenerateFloor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenerateFloor\CS\Command.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GenerateFloor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenerateFloor\CS\Command.cs	34	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	GenerateFloor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenerateFloor\CS\Command.cs	34	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GenerateFloor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenerateFloor\CS\Command.cs	35	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	GenerateFloor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenerateFloor\CS\Command.cs	35	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GenerateFloor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenerateFloor\CS\Command.cs	36	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	GenerateFloor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenerateFloor\CS\Command.cs	36	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	GenerateFloor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenerateFloor\CS\Command.cs	37	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GenerateFloor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenerateFloor\CS\Command.cs	56	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GenerateFloor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenerateFloor\CS\Command.cs	56	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GenerateFloor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenerateFloor\CS\Command.cs	57	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	GenerateFloor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenerateFloor\CS\Command.cs	102	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GenerateFloor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenerateFloor\CS\Data.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GenerateFloor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenerateFloor\CS\Data.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GenerateFloor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenerateFloor\CS\Data.cs	31	Active
Error	CS0246	The type or namespace name 'FloorType' could not be found (are you missing a using directive or an assembly reference?)	GenerateFloor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenerateFloor\CS\Data.cs	44	Active
Error	CS0246	The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)	GenerateFloor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenerateFloor\CS\Data.cs	45	Active
Error	CS0246	The type or namespace name 'CurveArray' could not be found (are you missing a using directive or an assembly reference?)	GenerateFloor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenerateFloor\CS\Data.cs	46	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GenerateFloor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenerateFloor\CS\Data.cs	51	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	GenerateFloor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenerateFloor\CS\Data.cs	52	Active
Error	CS0246	The type or namespace name 'FloorType' could not be found (are you missing a using directive or an assembly reference?)	GenerateFloor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenerateFloor\CS\Data.cs	57	Active
Error	CS0246	The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)	GenerateFloor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenerateFloor\CS\Data.cs	72	Active
Error	CS0246	The type or namespace name 'CurveArray' could not be found (are you missing a using directive or an assembly reference?)	GenerateFloor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenerateFloor\CS\Data.cs	87	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	GenerateFloor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenerateFloor\CS\Data.cs	165	Active
Error	CS0246	The type or namespace name 'FilteredElementIterator' could not be found (are you missing a using directive or an assembly reference?)	GenerateFloor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenerateFloor\CS\Data.cs	204	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	GenerateFloor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenerateFloor\CS\Data.cs	229	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	GenerateFloor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenerateFloor\CS\Data.cs	252	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GenerateFloor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenerateFloor\CS\Data.cs	305	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	GenerateFloor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenerateFloor\CS\Data.cs	330	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	GenerateFloor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenerateFloor\CS\Data.cs	330	Active
Error	CS0246	The type or namespace name 'CurveArray' could not be found (are you missing a using directive or an assembly reference?)	GenerateFloor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenerateFloor\CS\Data.cs	354	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	GenerateFloor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenerateFloor\CS\Data.cs	394	Active
Error	CS0246	The type or namespace name 'CurveArray' could not be found (are you missing a using directive or an assembly reference?)	GenerateFloor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenerateFloor\CS\Data.cs	394	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GenerateFloor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenerateFloor\CS\Data.cs	394	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	GenerateFloor	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenerateFloor\CS\Data.cs	394	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GenericModelCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\GenericModelCreation\CS\Command.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GenericModelCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\GenericModelCreation\CS\Command.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GenericModelCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\GenericModelCreation\CS\Command.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GenericModelCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\GenericModelCreation\CS\Command.cs	39	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	GenericModelCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\GenericModelCreation\CS\Command.cs	39	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GenericModelCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\GenericModelCreation\CS\Command.cs	40	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	GenericModelCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\GenericModelCreation\CS\Command.cs	40	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GenericModelCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\GenericModelCreation\CS\Command.cs	41	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	GenericModelCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\GenericModelCreation\CS\Command.cs	41	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	GenericModelCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\GenericModelCreation\CS\Command.cs	42	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GenericModelCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\GenericModelCreation\CS\Command.cs	46	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GenericModelCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\GenericModelCreation\CS\Command.cs	48	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GenericModelCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\GenericModelCreation\CS\Command.cs	50	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GenericModelCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\GenericModelCreation\CS\Command.cs	74	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	GenericModelCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\GenericModelCreation\CS\Command.cs	74	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	GenericModelCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\GenericModelCreation\CS\Command.cs	76	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GenericModelCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\GenericModelCreation\CS\Command.cs	382	Active
Error	CS0246	The type or namespace name 'SketchPlane' could not be found (are you missing a using directive or an assembly reference?)	GenericModelCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\GenericModelCreation\CS\Command.cs	394	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GenericModelCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\GenericModelCreation\CS\Command.cs	394	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GenericModelCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\GenericModelCreation\CS\Command.cs	394	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GenericStructuralConnection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\Command.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GenericStructuralConnection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\Command.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GenericStructuralConnection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\Command.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GenericStructuralConnection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\Command.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GenericStructuralConnection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\Command.cs	34	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GenericStructuralConnection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\Command.cs	35	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GenericStructuralConnection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\Command.cs	42	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	GenericStructuralConnection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\Command.cs	42	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GenericStructuralConnection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\Command.cs	43	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	GenericStructuralConnection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\Command.cs	43	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GenericStructuralConnection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\Command.cs	44	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	GenericStructuralConnection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\Command.cs	44	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	GenericStructuralConnection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\Command.cs	45	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	GenericStructuralConnection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\Command.cs	65	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	GenericStructuralConnection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\Command.cs	65	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	GenericStructuralConnection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\Command.cs	65	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GenericStructuralConnection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\CommandOptions.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GenericStructuralConnection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\CommandOptions.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GenericStructuralConnection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\CommandOptions.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GenericStructuralConnection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\DetailedStructuralConnectionOps.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GenericStructuralConnection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\DetailedStructuralConnectionOps.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GenericStructuralConnection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\DetailedStructuralConnectionOps.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GenericStructuralConnection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\DetailedStructuralConnectionOps.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GenericStructuralConnection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\DetailedStructuralConnectionOps.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GenericStructuralConnection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\DetailedStructuralConnectionOps.cs	34	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GenericStructuralConnection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\DetailedStructuralConnectionOps.cs	35	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	GenericStructuralConnection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\DetailedStructuralConnectionOps.cs	50	Active
Error	CS0246	The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)	GenericStructuralConnection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\DetailedStructuralConnectionOps.cs	50	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	GenericStructuralConnection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\DetailedStructuralConnectionOps.cs	93	Active
Error	CS0246	The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)	GenericStructuralConnection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\DetailedStructuralConnectionOps.cs	93	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	GenericStructuralConnection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\DetailedStructuralConnectionOps.cs	136	Active
Error	CS0246	The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)	GenericStructuralConnection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\DetailedStructuralConnectionOps.cs	136	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	GenericStructuralConnection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\DetailedStructuralConnectionOps.cs	175	Active
Error	CS0246	The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)	GenericStructuralConnection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\DetailedStructuralConnectionOps.cs	175	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	GenericStructuralConnection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\DetailedStructuralConnectionOps.cs	233	Active
Error	CS0246	The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)	GenericStructuralConnection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\DetailedStructuralConnectionOps.cs	233	Active
Error	CS0246	The type or namespace name 'Schema' could not be found (are you missing a using directive or an assembly reference?)	GenericStructuralConnection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\DetailedStructuralConnectionOps.cs	274	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	GenericStructuralConnection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\DetailedStructuralConnectionOps.cs	274	Active
Error	CS0246	The type or namespace name 'StructuralConnectionHandler' could not be found (are you missing a using directive or an assembly reference?)	GenericStructuralConnection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\DetailedStructuralConnectionOps.cs	274	Active
Error	CS0246	The type or namespace name 'StructuralConnectionHandler' could not be found (are you missing a using directive or an assembly reference?)	GenericStructuralConnection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\DetailedStructuralConnectionOps.cs	291	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	GenericStructuralConnection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\DetailedStructuralConnectionOps.cs	291	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GenericStructuralConnection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\GenericStructuralConnectionOps.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GenericStructuralConnection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\GenericStructuralConnectionOps.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GenericStructuralConnection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\GenericStructuralConnectionOps.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GenericStructuralConnection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\GenericStructuralConnectionOps.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GenericStructuralConnection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\GenericStructuralConnectionOps.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GenericStructuralConnection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\GenericStructuralConnectionOps.cs	34	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	GenericStructuralConnection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\GenericStructuralConnectionOps.cs	49	Active
Error	CS0246	The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)	GenericStructuralConnection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\GenericStructuralConnectionOps.cs	49	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	GenericStructuralConnection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\GenericStructuralConnectionOps.cs	86	Active
Error	CS0246	The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)	GenericStructuralConnection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\GenericStructuralConnectionOps.cs	86	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	GenericStructuralConnection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\GenericStructuralConnectionOps.cs	126	Active
Error	CS0246	The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)	GenericStructuralConnection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\GenericStructuralConnectionOps.cs	126	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	GenericStructuralConnection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\GenericStructuralConnectionOps.cs	167	Active
Error	CS0246	The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)	GenericStructuralConnection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\GenericStructuralConnectionOps.cs	167	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GenericStructuralConnection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\StructuralConnectionSelectionFilter.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GenericStructuralConnection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\StructuralConnectionSelectionFilter.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GenericStructuralConnection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\StructuralConnectionSelectionFilter.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GenericStructuralConnection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\StructuralConnectionSelectionFilter.cs	31	Active
Error	CS0246	The type or namespace name 'ISelectionFilter' could not be found (are you missing a using directive or an assembly reference?)	GenericStructuralConnection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\StructuralConnectionSelectionFilter.cs	38	Active
Error	CS0246	The type or namespace name 'LogicalOrFilter' could not be found (are you missing a using directive or an assembly reference?)	GenericStructuralConnection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\StructuralConnectionSelectionFilter.cs	40	Active
Error	CS0246	The type or namespace name 'LogicalOrFilter' could not be found (are you missing a using directive or an assembly reference?)	GenericStructuralConnection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\StructuralConnectionSelectionFilter.cs	46	Active
Error	CS0246	The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)	GenericStructuralConnection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\StructuralConnectionSelectionFilter.cs	56	Active
Error	CS0246	The type or namespace name 'Reference' could not be found (are you missing a using directive or an assembly reference?)	GenericStructuralConnection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\StructuralConnectionSelectionFilter.cs	66	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	GenericStructuralConnection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\StructuralConnectionSelectionFilter.cs	66	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GenericStructuralConnection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\StructuralConnectionSelectionUtils.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GenericStructuralConnection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\StructuralConnectionSelectionUtils.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GenericStructuralConnection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\StructuralConnectionSelectionUtils.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GenericStructuralConnection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\StructuralConnectionSelectionUtils.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GenericStructuralConnection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\StructuralConnectionSelectionUtils.cs	32	Active
Error	CS0246	The type or namespace name 'StructuralConnectionHandler' could not be found (are you missing a using directive or an assembly reference?)	GenericStructuralConnection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\StructuralConnectionSelectionUtils.cs	45	Active
Error	CS0246	The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)	GenericStructuralConnection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\StructuralConnectionSelectionUtils.cs	45	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	GenericStructuralConnection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\StructuralConnectionSelectionUtils.cs	68	Active
Error	CS0246	The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)	GenericStructuralConnection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\StructuralConnectionSelectionUtils.cs	68	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GeometryCreation_BooleanOperation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\AnalysisVisualizationFramework .cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GeometryCreation_BooleanOperation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\AnalysisVisualizationFramework .cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GeometryCreation_BooleanOperation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\AnalysisVisualizationFramework .cs	42	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GeometryCreation_BooleanOperation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\AnalysisVisualizationFramework .cs	58	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GeometryCreation_BooleanOperation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\AnalysisVisualizationFramework .cs	68	Active
Error	CS0246	The type or namespace name 'Solid' could not be found (are you missing a using directive or an assembly reference?)	GeometryCreation_BooleanOperation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\AnalysisVisualizationFramework .cs	82	Active
Error	CS0246	The type or namespace name 'Face' could not be found (are you missing a using directive or an assembly reference?)	GeometryCreation_BooleanOperation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\AnalysisVisualizationFramework .cs	167	Active
Error	CS0246	The type or namespace name 'UV' could not be found (are you missing a using directive or an assembly reference?)	GeometryCreation_BooleanOperation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\AnalysisVisualizationFramework .cs	167	Active
Error	CS0246	The type or namespace name 'ValueAtPoint' could not be found (are you missing a using directive or an assembly reference?)	GeometryCreation_BooleanOperation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\AnalysisVisualizationFramework .cs	167	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GeometryCreation_BooleanOperation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\BooleanOperation.cs	27	Active
Error	CS0246	The type or namespace name 'Solid' could not be found (are you missing a using directive or an assembly reference?)	GeometryCreation_BooleanOperation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\BooleanOperation.cs	39	Active
Error	CS0246	The type or namespace name 'Solid' could not be found (are you missing a using directive or an assembly reference?)	GeometryCreation_BooleanOperation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\BooleanOperation.cs	39	Active
Error	CS0246	The type or namespace name 'Solid' could not be found (are you missing a using directive or an assembly reference?)	GeometryCreation_BooleanOperation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\BooleanOperation.cs	39	Active
Error	CS0246	The type or namespace name 'Solid' could not be found (are you missing a using directive or an assembly reference?)	GeometryCreation_BooleanOperation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\BooleanOperation.cs	50	Active
Error	CS0246	The type or namespace name 'Solid' could not be found (are you missing a using directive or an assembly reference?)	GeometryCreation_BooleanOperation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\BooleanOperation.cs	50	Active
Error	CS0246	The type or namespace name 'Solid' could not be found (are you missing a using directive or an assembly reference?)	GeometryCreation_BooleanOperation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\BooleanOperation.cs	50	Active
Error	CS0246	The type or namespace name 'Solid' could not be found (are you missing a using directive or an assembly reference?)	GeometryCreation_BooleanOperation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\BooleanOperation.cs	61	Active
Error	CS0246	The type or namespace name 'Solid' could not be found (are you missing a using directive or an assembly reference?)	GeometryCreation_BooleanOperation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\BooleanOperation.cs	61	Active
Error	CS0246	The type or namespace name 'Solid' could not be found (are you missing a using directive or an assembly reference?)	GeometryCreation_BooleanOperation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\BooleanOperation.cs	61	Active
Error	CS0246	The type or namespace name 'Solid' could not be found (are you missing a using directive or an assembly reference?)	GeometryCreation_BooleanOperation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\BooleanOperation.cs	71	Active
Error	CS0246	The type or namespace name 'Solid' could not be found (are you missing a using directive or an assembly reference?)	GeometryCreation_BooleanOperation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\BooleanOperation.cs	71	Active
Error	CS0246	The type or namespace name 'Solid' could not be found (are you missing a using directive or an assembly reference?)	GeometryCreation_BooleanOperation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\BooleanOperation.cs	81	Active
Error	CS0246	The type or namespace name 'Solid' could not be found (are you missing a using directive or an assembly reference?)	GeometryCreation_BooleanOperation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\BooleanOperation.cs	81	Active
Error	CS0246	The type or namespace name 'Solid' could not be found (are you missing a using directive or an assembly reference?)	GeometryCreation_BooleanOperation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\BooleanOperation.cs	91	Active
Error	CS0246	The type or namespace name 'Solid' could not be found (are you missing a using directive or an assembly reference?)	GeometryCreation_BooleanOperation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\BooleanOperation.cs	91	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GeometryCreation_BooleanOperation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\Command.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GeometryCreation_BooleanOperation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\Command.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GeometryCreation_BooleanOperation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\Command.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GeometryCreation_BooleanOperation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\Command.cs	39	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	GeometryCreation_BooleanOperation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\Command.cs	39	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GeometryCreation_BooleanOperation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\Command.cs	40	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	GeometryCreation_BooleanOperation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\Command.cs	40	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	GeometryCreation_BooleanOperation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\Command.cs	41	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	GeometryCreation_BooleanOperation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\Command.cs	59	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	GeometryCreation_BooleanOperation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\Command.cs	59	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	GeometryCreation_BooleanOperation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\Command.cs	60	Active
Error	CS0246	The type or namespace name 'Solid' could not be found (are you missing a using directive or an assembly reference?)	GeometryCreation_BooleanOperation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\Command.cs	103	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GeometryCreation_BooleanOperation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\GeometryCreation.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GeometryCreation_BooleanOperation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\GeometryCreation.cs	41	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GeometryCreation_BooleanOperation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\GeometryCreation.cs	57	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GeometryCreation_BooleanOperation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\GeometryCreation.cs	67	Active
Error	CS0246	The type or namespace name 'Solid' could not be found (are you missing a using directive or an assembly reference?)	GeometryCreation_BooleanOperation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\GeometryCreation.cs	83	Active
Error	CS0246	The type or namespace name 'CurveLoop' could not be found (are you missing a using directive or an assembly reference?)	GeometryCreation_BooleanOperation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\GeometryCreation.cs	83	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	GeometryCreation_BooleanOperation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\GeometryCreation.cs	83	Active
Error	CS0246	The type or namespace name 'Solid' could not be found (are you missing a using directive or an assembly reference?)	GeometryCreation_BooleanOperation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\GeometryCreation.cs	96	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GeometryCreation_BooleanOperation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\GeometryCreation.cs	96	Active
Error	CS0246	The type or namespace name 'CurveLoop' could not be found (are you missing a using directive or an assembly reference?)	GeometryCreation_BooleanOperation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\GeometryCreation.cs	96	Active
Error	CS0246	The type or namespace name 'Solid' could not be found (are you missing a using directive or an assembly reference?)	GeometryCreation_BooleanOperation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\GeometryCreation.cs	109	Active
Error	CS0246	The type or namespace name 'CurveLoop' could not be found (are you missing a using directive or an assembly reference?)	GeometryCreation_BooleanOperation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\GeometryCreation.cs	109	Active
Error	CS0246	The type or namespace name 'CurveLoop' could not be found (are you missing a using directive or an assembly reference?)	GeometryCreation_BooleanOperation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\GeometryCreation.cs	109	Active
Error	CS0246	The type or namespace name 'Solid' could not be found (are you missing a using directive or an assembly reference?)	GeometryCreation_BooleanOperation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\GeometryCreation.cs	121	Active
Error	CS0246	The type or namespace name 'CurveLoop' could not be found (are you missing a using directive or an assembly reference?)	GeometryCreation_BooleanOperation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\GeometryCreation.cs	121	Active
Error	CS0246	The type or namespace name 'CurveLoop' could not be found (are you missing a using directive or an assembly reference?)	GeometryCreation_BooleanOperation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\GeometryCreation.cs	121	Active
Error	CS0246	The type or namespace name 'VertexPair' could not be found (are you missing a using directive or an assembly reference?)	GeometryCreation_BooleanOperation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\GeometryCreation.cs	121	Active
Error	CS0246	The type or namespace name 'Solid' could not be found (are you missing a using directive or an assembly reference?)	GeometryCreation_BooleanOperation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\GeometryCreation.cs	134	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	GeometryCreation_BooleanOperation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\GeometryCreation.cs	134	Active
Error	CS0246	The type or namespace name 'CurveLoop' could not be found (are you missing a using directive or an assembly reference?)	GeometryCreation_BooleanOperation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\GeometryCreation.cs	134	Active
Error	CS0246	The type or namespace name 'VertexPair' could not be found (are you missing a using directive or an assembly reference?)	GeometryCreation_BooleanOperation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\GeometryCreation.cs	134	Active
Error	CS0246	The type or namespace name 'Solid' could not be found (are you missing a using directive or an assembly reference?)	GeometryCreation_BooleanOperation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\GeometryCreation.cs	145	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	GeometryCreation_BooleanOperation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\GeometryCreation.cs	145	Active
Error	CS0246	The type or namespace name 'Solid' could not be found (are you missing a using directive or an assembly reference?)	GeometryCreation_BooleanOperation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\GeometryCreation.cs	178	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	GeometryCreation_BooleanOperation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\GeometryCreation.cs	178	Active
Error	CS0246	The type or namespace name 'Solid' could not be found (are you missing a using directive or an assembly reference?)	GeometryCreation_BooleanOperation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\GeometryCreation.cs	208	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	GeometryCreation_BooleanOperation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\GeometryCreation.cs	208	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GetSetDefaultTypes	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\DefaultElementTypes.xaml.cs	35	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GetSetDefaultTypes	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\DefaultElementTypes.xaml.cs	36	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GetSetDefaultTypes	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\DefaultElementTypes.xaml.cs	43	Active
Error	CS0246	The type or namespace name 'DockablePaneId' could not be found (are you missing a using directive or an assembly reference?)	GetSetDefaultTypes	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\DefaultElementTypes.xaml.cs	45	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	GetSetDefaultTypes	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\DefaultElementTypes.xaml.cs	126	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GetSetDefaultTypes	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\DefaultElementTypes.xaml.cs	174	Active
Error	CS0246	The type or namespace name 'ExternalEvent' could not be found (are you missing a using directive or an assembly reference?)	GetSetDefaultTypes	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\DefaultElementTypes.xaml.cs	184	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	GetSetDefaultTypes	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\DefaultElementTypes.xaml.cs	186	Active
Error	CS0246	The type or namespace name 'ElementTypeGroup' could not be found (are you missing a using directive or an assembly reference?)	GetSetDefaultTypes	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\DefaultElementTypes.xaml.cs	187	Active
Error	CS0246	The type or namespace name 'ElementTypeGroup' could not be found (are you missing a using directive or an assembly reference?)	GetSetDefaultTypes	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\DefaultElementTypes.xaml.cs	231	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	GetSetDefaultTypes	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\DefaultElementTypes.xaml.cs	240	Active
Error	CS0246	The type or namespace name 'IExternalEventHandler' could not be found (are you missing a using directive or an assembly reference?)	GetSetDefaultTypes	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\DefaultElementTypes.xaml.cs	288	Active
Error	CS0246	The type or namespace name 'ElementTypeGroup' could not be found (are you missing a using directive or an assembly reference?)	GetSetDefaultTypes	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\DefaultElementTypes.xaml.cs	290	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	GetSetDefaultTypes	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\DefaultElementTypes.xaml.cs	291	Active
Error	CS0246	The type or namespace name 'ElementTypeGroup' could not be found (are you missing a using directive or an assembly reference?)	GetSetDefaultTypes	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\DefaultElementTypes.xaml.cs	292	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	GetSetDefaultTypes	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\DefaultElementTypes.xaml.cs	292	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GetSetDefaultTypes	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\DefaultElementTypes.xaml.cs	304	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GetSetDefaultTypes	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\DefaultFamilyTypes.xaml.cs	36	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GetSetDefaultTypes	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\DefaultFamilyTypes.xaml.cs	37	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GetSetDefaultTypes	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\DefaultFamilyTypes.xaml.cs	44	Active
Error	CS0246	The type or namespace name 'DockablePaneId' could not be found (are you missing a using directive or an assembly reference?)	GetSetDefaultTypes	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\DefaultFamilyTypes.xaml.cs	46	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	GetSetDefaultTypes	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\DefaultFamilyTypes.xaml.cs	61	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	GetSetDefaultTypes	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\DefaultFamilyTypes.xaml.cs	109	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GetSetDefaultTypes	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\DefaultFamilyTypes.xaml.cs	133	Active
Error	CS0246	The type or namespace name 'ExternalEvent' could not be found (are you missing a using directive or an assembly reference?)	GetSetDefaultTypes	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\DefaultFamilyTypes.xaml.cs	143	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	GetSetDefaultTypes	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\DefaultFamilyTypes.xaml.cs	145	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	GetSetDefaultTypes	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\DefaultFamilyTypes.xaml.cs	188	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	GetSetDefaultTypes	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\DefaultFamilyTypes.xaml.cs	197	Active
Error	CS0246	The type or namespace name 'IExternalEventHandler' could not be found (are you missing a using directive or an assembly reference?)	GetSetDefaultTypes	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\DefaultFamilyTypes.xaml.cs	245	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	GetSetDefaultTypes	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\DefaultFamilyTypes.xaml.cs	247	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	GetSetDefaultTypes	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\DefaultFamilyTypes.xaml.cs	248	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	GetSetDefaultTypes	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\DefaultFamilyTypes.xaml.cs	249	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	GetSetDefaultTypes	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\DefaultFamilyTypes.xaml.cs	249	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GetSetDefaultTypes	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\DefaultFamilyTypes.xaml.cs	261	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GetSetDefaultTypes	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\ThisApplication.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GetSetDefaultTypes	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\ThisApplication.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GetSetDefaultTypes	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\ThisApplication.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GetSetDefaultTypes	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\ThisApplication.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GetSetDefaultTypes	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\ThisApplication.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GetSetDefaultTypes	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\ThisApplication.cs	37	Active
Error	CS0246	The type or namespace name 'IExternalApplication' could not be found (are you missing a using directive or an assembly reference?)	GetSetDefaultTypes	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\ThisApplication.cs	47	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	GetSetDefaultTypes	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\ThisApplication.cs	51	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	GetSetDefaultTypes	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\ThisApplication.cs	51	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	GetSetDefaultTypes	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\ThisApplication.cs	56	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	GetSetDefaultTypes	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\ThisApplication.cs	56	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GetSetDefaultTypes	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\ThisApplication.cs	94	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GetSetDefaultTypes	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\ThisCommand.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GetSetDefaultTypes	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\ThisCommand.cs	31	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	GetSetDefaultTypes	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\ThisCommand.cs	31	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	GetSetDefaultTypes	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\ThisCommand.cs	32	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	GetSetDefaultTypes	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\ThisCommand.cs	36	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	GetSetDefaultTypes	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\ThisCommand.cs	36	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GetSetDefaultTypes	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\ThisCommand.cs	36	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GridCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\Command.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GridCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\Command.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GridCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\Command.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GridCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\Command.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GridCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\Command.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GridCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\Command.cs	39	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	GridCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\Command.cs	39	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GridCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\Command.cs	40	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	GridCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\Command.cs	40	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GridCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\Command.cs	41	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	GridCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\Command.cs	41	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	GridCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\Command.cs	42	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GridCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\Command.cs	60	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	GridCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\Command.cs	60	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GridCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\Command.cs	61	Active
Error	CS0246	The type or namespace name 'CurveArray' could not be found (are you missing a using directive or an assembly reference?)	GridCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\Command.cs	155	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	GridCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\Command.cs	155	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	GridCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\Command.cs	194	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	GridCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\Command.cs	194	Active
Error	CS0246	The type or namespace name 'ForgeTypeId' could not be found (are you missing a using directive or an assembly reference?)	GridCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\Command.cs	219	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	GridCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\Command.cs	219	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	GridCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\Command.cs	239	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GridCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateGridsData.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GridCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateGridsData.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GridCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateGridsData.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GridCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateGridsData.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GridCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateGridsData.cs	45	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GridCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateGridsData.cs	49	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GridCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateGridsData.cs	53	Active
Error	CS0246	The type or namespace name 'ForgeTypeId' could not be found (are you missing a using directive or an assembly reference?)	GridCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateGridsData.cs	61	Active
Error	CS0246	The type or namespace name 'ForgeTypeId' could not be found (are you missing a using directive or an assembly reference?)	GridCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateGridsData.cs	72	Active
Error	CS0246	The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)	GridCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateGridsData.cs	98	Active
Error	CS0246	The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)	GridCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateGridsData.cs	112	Active
Error	CS0246	The type or namespace name 'ForgeTypeId' could not be found (are you missing a using directive or an assembly reference?)	GridCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateGridsData.cs	112	Active
Error	CS0246	The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)	GridCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateGridsData.cs	127	Active
Error	CS0246	The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)	GridCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateGridsData.cs	127	Active
Error	CS0246	The type or namespace name 'Arc' could not be found (are you missing a using directive or an assembly reference?)	GridCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateGridsData.cs	152	Active
Error	CS0246	The type or namespace name 'Arc' could not be found (are you missing a using directive or an assembly reference?)	GridCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateGridsData.cs	152	Active
Error	CS0246	The type or namespace name 'Arc' could not be found (are you missing a using directive or an assembly reference?)	GridCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateGridsData.cs	213	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GridCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateGridsData.cs	213	Active
Error	CS0246	The type or namespace name 'Arc' could not be found (are you missing a using directive or an assembly reference?)	GridCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateGridsData.cs	244	Active
Error	CS0246	The type or namespace name 'Arc' could not be found (are you missing a using directive or an assembly reference?)	GridCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateGridsData.cs	244	Active
Error	CS0246	The type or namespace name 'Arc' could not be found (are you missing a using directive or an assembly reference?)	GridCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateGridsData.cs	244	Active
Error	CS0246	The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)	GridCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateGridsData.cs	270	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GridCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateGridsData.cs	270	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GridCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateGridsData.cs	270	Active
Error	CS0246	The type or namespace name 'Grid' could not be found (are you missing a using directive or an assembly reference?)	GridCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateGridsData.cs	280	Active
Error	CS0246	The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)	GridCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateGridsData.cs	280	Active
Error	CS0246	The type or namespace name 'Grid' could not be found (are you missing a using directive or an assembly reference?)	GridCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateGridsData.cs	290	Active
Error	CS0246	The type or namespace name 'Arc' could not be found (are you missing a using directive or an assembly reference?)	GridCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateGridsData.cs	290	Active
Error	CS0246	The type or namespace name 'Grid' could not be found (are you missing a using directive or an assembly reference?)	GridCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateGridsData.cs	301	Active
Error	CS0246	The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)	GridCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateGridsData.cs	301	Active
Error	CS0246	The type or namespace name 'CurveArray' could not be found (are you missing a using directive or an assembly reference?)	GridCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateGridsData.cs	310	Active
Error	CS0246	The type or namespace name 'CurveArray' could not be found (are you missing a using directive or an assembly reference?)	GridCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateGridsData.cs	334	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	GridCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateGridsData.cs	334	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GridCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateOrthogonalGridsData.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GridCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateOrthogonalGridsData.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GridCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateOrthogonalGridsData.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GridCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateOrthogonalGridsData.cs	32	Active
Error	CS0246	The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)	GridCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateOrthogonalGridsData.cs	223	Active
Error	CS0246	The type or namespace name 'ForgeTypeId' could not be found (are you missing a using directive or an assembly reference?)	GridCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateOrthogonalGridsData.cs	223	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GridCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateRadialAndArcGridsData.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GridCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateRadialAndArcGridsData.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GridCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateRadialAndArcGridsData.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GridCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateRadialAndArcGridsData.cs	32	Active
Error	CS0246	The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)	GridCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateRadialAndArcGridsData.cs	274	Active
Error	CS0246	The type or namespace name 'ForgeTypeId' could not be found (are you missing a using directive or an assembly reference?)	GridCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateRadialAndArcGridsData.cs	274	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GridCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateWithSeletedCurvesData.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GridCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateWithSeletedCurvesData.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GridCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateWithSeletedCurvesData.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GridCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateWithSeletedCurvesData.cs	32	Active
Error	CS0246	The type or namespace name 'CurveArray' could not be found (are you missing a using directive or an assembly reference?)	GridCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateWithSeletedCurvesData.cs	43	Active
Error	CS0246	The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)	GridCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateWithSeletedCurvesData.cs	106	Active
Error	CS0246	The type or namespace name 'CurveArray' could not be found (are you missing a using directive or an assembly reference?)	GridCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateWithSeletedCurvesData.cs	106	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GridCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\GridCreationOptionData.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GridCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\GridCreationOptionData.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GridCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\Unit.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GridCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\Unit.cs	31	Active
Error	CS0246	The type or namespace name 'ForgeTypeId' could not be found (are you missing a using directive or an assembly reference?)	GridCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\Unit.cs	47	Active
Error	CS0246	The type or namespace name 'ForgeTypeId' could not be found (are you missing a using directive or an assembly reference?)	GridCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\Unit.cs	58	Active
Error	CS0246	The type or namespace name 'ForgeTypeId' could not be found (are you missing a using directive or an assembly reference?)	GridCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\Unit.cs	68	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	GridCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\Validation.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	HelloRevit	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\HelloRevit\CS\Command.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	HelloRevit	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\HelloRevit\CS\Command.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	HelloRevit	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\HelloRevit\CS\Command.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	HelloRevit	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\HelloRevit\CS\Command.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	HelloRevit	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\HelloRevit\CS\Command.cs	38	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	HelloRevit	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\HelloRevit\CS\Command.cs	38	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	HelloRevit	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\HelloRevit\CS\Command.cs	39	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	HelloRevit	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\HelloRevit\CS\Command.cs	39	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	HelloRevit	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\HelloRevit\CS\Command.cs	40	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	HelloRevit	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\HelloRevit\CS\Command.cs	40	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	HelloRevit	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\HelloRevit\CS\Command.cs	41	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	HelloRevit	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\HelloRevit\CS\Command.cs	61	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	HelloRevit	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\HelloRevit\CS\Command.cs	61	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	HelloRevit	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\HelloRevit\CS\Command.cs	62	Active
Error	BC40056	Namespace or type specified in the Imports 'Autodesk' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.	HelloRevit	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\HelloRevit\VB.NET\HelloRevit.vb	24	Active
Error	BC40056	Namespace or type specified in the Imports 'Autodesk.Revit.DB' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.	HelloRevit	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\HelloRevit\VB.NET\HelloRevit.vb	25	Active
Error	BC40056	Namespace or type specified in the Imports 'Autodesk.Revit.UI' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.	HelloRevit	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\HelloRevit\VB.NET\HelloRevit.vb	26	Active
Error	BC40056	Namespace or type specified in the Imports 'Autodesk.Revit.ApplicationServices' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.	HelloRevit	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\HelloRevit\VB.NET\HelloRevit.vb	27	Active
Error	BC30002	Type 'Autodesk.Revit.Attributes.Transaction' is not defined.	HelloRevit	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\HelloRevit\VB.NET\HelloRevit.vb	33	Active
Error	BC30451	'Autodesk' is not declared. It may be inaccessible due to its protection level.	HelloRevit	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\HelloRevit\VB.NET\HelloRevit.vb	33	Active
Error	BC30002	Type 'Autodesk.Revit.Attributes.Regeneration' is not defined.	HelloRevit	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\HelloRevit\VB.NET\HelloRevit.vb	34	Active
Error	BC30451	'Autodesk' is not declared. It may be inaccessible due to its protection level.	HelloRevit	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\HelloRevit\VB.NET\HelloRevit.vb	34	Active
Error	BC30002	Type 'Autodesk.Revit.Attributes.Journaling' is not defined.	HelloRevit	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\HelloRevit\VB.NET\HelloRevit.vb	35	Active
Error	BC30451	'Autodesk' is not declared. It may be inaccessible due to its protection level.	HelloRevit	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\HelloRevit\VB.NET\HelloRevit.vb	35	Active
Error	BC30002	Type 'Autodesk.Revit.UI.IExternalCommand' is not defined.	HelloRevit	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\HelloRevit\VB.NET\HelloRevit.vb	38	Active
Error	BC30002	Type 'Autodesk.Revit.UI.ExternalCommandData' is not defined.	HelloRevit	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\HelloRevit\VB.NET\HelloRevit.vb	56	Active
Error	BC30002	Type 'Autodesk.Revit.DB.ElementSet' is not defined.	HelloRevit	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\HelloRevit\VB.NET\HelloRevit.vb	57	Active
Error	BC30002	Type 'Autodesk.Revit.UI.Result' is not defined.	HelloRevit	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\HelloRevit\VB.NET\HelloRevit.vb	58	Active
Error	BC30002	Type 'Autodesk.Revit.UI.IExternalCommand' is not defined.	HelloRevit	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\HelloRevit\VB.NET\HelloRevit.vb	58	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Command.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Command.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Command.cs	37	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Command.cs	37	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Command.cs	38	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Command.cs	38	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Command.cs	39	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Command.cs	39	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Command.cs	40	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Command.cs	58	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Command.cs	58	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Command.cs	59	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportBaseOptionsData.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportBaseOptionsData.cs	46	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportBaseOptionsData.cs	71	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportBaseOptionsData.cs	76	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportBaseOptionsData.cs	81	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportBaseOptionsData.cs	106	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportBaseOptionsData.cs	111	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportBaseOptionsData.cs	121	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportBaseOptionsData.cs	126	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportBaseOptionsData.cs	152	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportBaseOptionsData.cs	163	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportBaseOptionsData.cs	226	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportBaseOptionsData.cs	237	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportBaseOptionsData.cs	300	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportBaseOptionsData.cs	311	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportBaseOptionsData.cs	337	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportBaseOptionsData.cs	348	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportData.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportData.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportData.cs	32	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportData.cs	45	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportData.cs	50	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportData.cs	98	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportData.cs	109	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportData.cs	242	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportDataWithViews.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportDataWithViews.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportDataWithViews.cs	29	Active
Error	CS0246	The type or namespace name 'ViewSet' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportDataWithViews.cs	47	Active
Error	CS0246	The type or namespace name 'ViewSet' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportDataWithViews.cs	74	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportDataWithViews.cs	108	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportDGNData.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportDGNData.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportDGNData.cs	31	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportDGNData.cs	195	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportDGNOptionsForm.cs	34	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportDWFData.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportDWFData.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportDWFData.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportDWFData.cs	56	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportDWFData.cs	60	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportDWFData.cs	64	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportDWFData.cs	116	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportDWFData.cs	131	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportDWFData.cs	146	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportDWFData.cs	165	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportDWGData.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportDWGData.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportDWGData.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportDWGData.cs	54	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportDWGData.cs	59	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportDWGData.cs	92	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportDWGData.cs	103	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportDWGData.cs	122	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportDXFData.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportDXFData.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportDXFData.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportDXFData.cs	54	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportDXFData.cs	59	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportDXFData.cs	92	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportDXFData.cs	103	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportDXFData.cs	122	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportFBXData.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportFBXData.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportFBXData.cs	29	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportFBXData.cs	43	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportGBXMLData.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportGBXMLData.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportGBXMLData.cs	29	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportGBXMLData.cs	43	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportIMGData.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportIMGData.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportIMGData.cs	32	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportIMGData.cs	53	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportIMGOptionsForm.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportIMGOptionsForm.cs	33	Active
Error	CS0246	The type or namespace name 'ImageExportOptions' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportIMGOptionsForm.cs	46	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportSATData.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportSATData.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportSATData.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportSATData.cs	49	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportSATData.cs	54	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportSATData.cs	73	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportSATData.cs	84	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportSATData.cs	103	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportWithViewsForm.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\SelectViewsData.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\SelectViewsData.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\SelectViewsData.cs	30	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\SelectViewsData.cs	43	Active
Error	CS0246	The type or namespace name 'ViewSet' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\SelectViewsData.cs	48	Active
Error	CS0246	The type or namespace name 'ViewSet' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\SelectViewsData.cs	53	Active
Error	CS0246	The type or namespace name 'ViewSet' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\SelectViewsData.cs	58	Active
Error	CS0246	The type or namespace name 'ViewSet' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\SelectViewsData.cs	70	Active
Error	CS0246	The type or namespace name 'ViewSet' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\SelectViewsData.cs	85	Active
Error	CS0246	The type or namespace name 'ViewSet' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\SelectViewsData.cs	100	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\SelectViewsData.cs	132	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Import\ImportData.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Import\ImportData.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Import\ImportData.cs	31	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Import\ImportData.cs	44	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Import\ImportData.cs	48	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Import\ImportData.cs	79	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Import\ImportData.cs	161	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Import\ImportDWGData.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Import\ImportDWGData.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Import\ImportDWGData.cs	30	Active
Error	CS0246	The type or namespace name 'ViewSet' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Import\ImportDWGData.cs	48	Active
Error	CS0246	The type or namespace name 'View' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Import\ImportDWGData.cs	53	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Import\ImportDWGData.cs	63	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Import\ImportDWGData.cs	68	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Import\ImportDWGData.cs	88	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Import\ImportDWGData.cs	93	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Import\ImportDWGData.cs	103	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Import\ImportDWGData.cs	108	Active
Error	CS0246	The type or namespace name 'ViewSet' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Import\ImportDWGData.cs	152	Active
Error	CS0246	The type or namespace name 'View' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Import\ImportDWGData.cs	168	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Import\ImportDWGData.cs	196	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Import\ImportDWGData.cs	208	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Import\ImportDWGData.cs	268	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Import\ImportDWGData.cs	280	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Import\ImportDWGData.cs	308	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Import\ImportDWGData.cs	320	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Import\ImportDWGData.cs	395	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Import\ImportDWGForm.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Import\ImportDWGForm.cs	34	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Import\ImportDWGForm.cs	35	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Import\ImportGBXMLData.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Import\ImportGBXMLData.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Import\ImportGBXMLData.cs	29	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Import\ImportGBXMLData.cs	43	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Import\ImportImageData.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Import\ImportImageData.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Import\ImportImageData.cs	30	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Import\ImportImageData.cs	44	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Import\ImportInventorData.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Import\ImportInventorData.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Import\ImportInventorData.cs	29	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Import\ImportInventorData.cs	43	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\MainData.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\MainData.cs	30	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\MainData.cs	106	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\MainData.cs	114	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\MainData.cs	141	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Unit.cs	27	Active
Error	CS0246	The type or namespace name 'ForgeTypeId' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Unit.cs	45	Active
Error	CS0246	The type or namespace name 'ForgeTypeId' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Unit.cs	56	Active
Error	CS0246	The type or namespace name 'ForgeTypeId' could not be found (are you missing a using directive or an assembly reference?)	ImportExport	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Unit.cs	66	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	InPlaceMembers	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InPlaceMembers\CS\Command.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	InPlaceMembers	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InPlaceMembers\CS\Command.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	InPlaceMembers	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InPlaceMembers\CS\Command.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	InPlaceMembers	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InPlaceMembers\CS\Command.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	InPlaceMembers	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InPlaceMembers\CS\Command.cs	40	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	InPlaceMembers	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InPlaceMembers\CS\Command.cs	40	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	InPlaceMembers	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InPlaceMembers\CS\Command.cs	41	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	InPlaceMembers	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InPlaceMembers\CS\Command.cs	41	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	InPlaceMembers	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InPlaceMembers\CS\Command.cs	42	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	InPlaceMembers	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InPlaceMembers\CS\Command.cs	42	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	InPlaceMembers	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InPlaceMembers\CS\Command.cs	43	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	InPlaceMembers	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InPlaceMembers\CS\Command.cs	45	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	InPlaceMembers	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InPlaceMembers\CS\Command.cs	63	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	InPlaceMembers	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InPlaceMembers\CS\Command.cs	63	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	InPlaceMembers	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InPlaceMembers\CS\Command.cs	64	Active
Error	CS0246	The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)	InPlaceMembers	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InPlaceMembers\CS\Command.cs	108	Active
Error	CS0246	The type or namespace name 'AnalyticalModel' could not be found (are you missing a using directive or an assembly reference?)	InPlaceMembers	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InPlaceMembers\CS\Command.cs	108	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	InPlaceMembers	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InPlaceMembers\CS\GraphicsData.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	InPlaceMembers	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InPlaceMembers\CS\GraphicsData.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	InPlaceMembers	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InPlaceMembers\CS\GraphicsData.cs	73	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	InPlaceMembers	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InPlaceMembers\CS\GraphicsData.cs	78	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	InPlaceMembers	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InPlaceMembers\CS\GraphicsData.cs	83	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	InPlaceMembers	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InPlaceMembers\CS\GraphicsData.cs	88	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	InPlaceMembers	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InPlaceMembers\CS\GraphicsData.cs	270	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	InPlaceMembers	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InPlaceMembers\CS\GraphicsData.cs	271	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	InPlaceMembers	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InPlaceMembers\CS\GraphicsData.cs	302	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	InPlaceMembers	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InPlaceMembers\CS\GraphicsData.cs	338	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	InPlaceMembers	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InPlaceMembers\CS\GraphicsData.cs	354	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	InPlaceMembers	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InPlaceMembers\CS\GraphicsData.cs	354	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	InPlaceMembers	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InPlaceMembers\CS\GraphicsData.cs	362	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	InPlaceMembers	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InPlaceMembers\CS\GraphicsData.cs	362	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	InPlaceMembers	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InPlaceMembers\CS\GraphicsData.cs	376	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	InPlaceMembers	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InPlaceMembers\CS\GraphicsData.cs	376	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	InPlaceMembers	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InPlaceMembers\CS\GraphicsData.cs	394	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	InPlaceMembers	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InPlaceMembers\CS\GraphicsData.cs	394	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	InPlaceMembers	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InPlaceMembers\CS\GraphicsDataFactory.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	InPlaceMembers	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InPlaceMembers\CS\GraphicsDataFactory.cs	31	Active
Error	CS0246	The type or namespace name 'AnalyticalModel' could not be found (are you missing a using directive or an assembly reference?)	InPlaceMembers	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InPlaceMembers\CS\GraphicsDataFactory.cs	46	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	InPlaceMembers	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InPlaceMembers\CS\Properties.cs	25	Active
Error	CS0246	The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)	InPlaceMembers	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InPlaceMembers\CS\Properties.cs	131	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	InvisibleParam	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InvisibleParam\CS\Command.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	InvisibleParam	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InvisibleParam\CS\Command.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	InvisibleParam	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InvisibleParam\CS\Command.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	InvisibleParam	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InvisibleParam\CS\Command.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	InvisibleParam	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InvisibleParam\CS\Command.cs	40	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	InvisibleParam	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InvisibleParam\CS\Command.cs	40	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	InvisibleParam	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InvisibleParam\CS\Command.cs	41	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	InvisibleParam	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InvisibleParam\CS\Command.cs	41	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	InvisibleParam	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InvisibleParam\CS\Command.cs	42	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	InvisibleParam	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InvisibleParam\CS\Command.cs	42	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	InvisibleParam	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InvisibleParam\CS\Command.cs	43	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	InvisibleParam	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InvisibleParam\CS\Command.cs	63	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	InvisibleParam	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InvisibleParam\CS\Command.cs	64	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	InvisibleParam	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InvisibleParam\CS\Command.cs	64	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Journaling	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Journaling\CS\Command.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Journaling	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Journaling\CS\Command.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Journaling	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Journaling\CS\Command.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Journaling	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Journaling\CS\Command.cs	37	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	Journaling	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Journaling\CS\Command.cs	37	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Journaling	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Journaling\CS\Command.cs	38	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	Journaling	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Journaling\CS\Command.cs	38	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Journaling	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Journaling\CS\Command.cs	39	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	Journaling	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Journaling\CS\Command.cs	39	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	Journaling	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Journaling\CS\Command.cs	40	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Journaling	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Journaling\CS\Command.cs	59	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Journaling	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Journaling\CS\Command.cs	59	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	Journaling	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Journaling\CS\Command.cs	61	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Journaling	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Journaling\CS\Journaling.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Journaling	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Journaling\CS\Journaling.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Journaling	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Journaling\CS\Journaling.cs	34	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Journaling	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Journaling\CS\Journaling.cs	35	Active
Error	CS0246	The type or namespace name 'WallType' could not be found (are you missing a using directive or an assembly reference?)	Journaling	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Journaling\CS\Journaling.cs	44	Active
Error	CS0246	The type or namespace name 'WallType' could not be found (are you missing a using directive or an assembly reference?)	Journaling	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Journaling\CS\Journaling.cs	46	Active
Error	CS0246	The type or namespace name 'WallType' could not be found (are you missing a using directive or an assembly reference?)	Journaling	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Journaling\CS\Journaling.cs	46	Active
Error	CS0246	The type or namespace name 'WallType' could not be found (are you missing a using directive or an assembly reference?)	Journaling	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Journaling\CS\Journaling.cs	46	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	Journaling	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Journaling\CS\Journaling.cs	53	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Journaling	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Journaling\CS\Journaling.cs	56	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Journaling	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Journaling\CS\Journaling.cs	57	Active
Error	CS0246	The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)	Journaling	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Journaling\CS\Journaling.cs	58	Active
Error	CS0246	The type or namespace name 'WallType' could not be found (are you missing a using directive or an assembly reference?)	Journaling	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Journaling\CS\Journaling.cs	59	Active
Error	CS0246	The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)	Journaling	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Journaling\CS\Journaling.cs	61	Active
Error	CS0246	The type or namespace name 'WallType' could not be found (are you missing a using directive or an assembly reference?)	Journaling	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Journaling\CS\Journaling.cs	62	Active
Error	CS0246	The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)	Journaling	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Journaling\CS\Journaling.cs	69	Active
Error	CS0246	The type or namespace name 'WallType' could not be found (are you missing a using directive or an assembly reference?)	Journaling	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Journaling\CS\Journaling.cs	81	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	Journaling	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Journaling\CS\Journaling.cs	95	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Journaling	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Journaling\CS\Journaling.cs	141	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Journaling	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Journaling\CS\Journaling.cs	141	Active
Error	CS0246	The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)	Journaling	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Journaling\CS\Journaling.cs	141	Active
Error	CS0246	The type or namespace name 'WallType' could not be found (are you missing a using directive or an assembly reference?)	Journaling	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Journaling\CS\Journaling.cs	141	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Journaling	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Journaling\CS\Journaling.cs	307	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Journaling	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Journaling\CS\Journaling.cs	344	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Journaling	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Journaling\CS\JournalingForm.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Journaling	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Journaling\CS\JournalingForm.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Journaling	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Journaling\CS\PointUserControl.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Journaling	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Journaling\CS\PointUserControl.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Journaling	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Journaling\CS\PointUserControl.cs	63	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	LevelsProperty	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\LevelsProperty\CS\Command.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	LevelsProperty	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\LevelsProperty\CS\Command.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	LevelsProperty	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\LevelsProperty\CS\Command.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	LevelsProperty	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\LevelsProperty\CS\Command.cs	37	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	LevelsProperty	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\LevelsProperty\CS\Command.cs	37	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	LevelsProperty	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\LevelsProperty\CS\Command.cs	38	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	LevelsProperty	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\LevelsProperty\CS\Command.cs	38	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	LevelsProperty	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\LevelsProperty\CS\Command.cs	39	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	LevelsProperty	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\LevelsProperty\CS\Command.cs	39	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	LevelsProperty	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\LevelsProperty\CS\Command.cs	40	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	LevelsProperty	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\LevelsProperty\CS\Command.cs	60	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	LevelsProperty	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\LevelsProperty\CS\Command.cs	60	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	LevelsProperty	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\LevelsProperty\CS\Command.cs	60	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	LevelsProperty	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\LevelsProperty\CS\Command.cs	105	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	LevelsProperty	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\LevelsProperty\CS\Command.cs	106	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	LevelsProperty	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\LevelsProperty\CS\LevelsForm.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	LevelsProperty	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\LevelsProperty\CS\Unit.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	LevelsProperty	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\LevelsProperty\CS\Unit.cs	28	Active
Error	CS0246	The type or namespace name 'ForgeTypeId' could not be found (are you missing a using directive or an assembly reference?)	LevelsProperty	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\LevelsProperty\CS\Unit.cs	44	Active
Error	CS0246	The type or namespace name 'ForgeTypeId' could not be found (are you missing a using directive or an assembly reference?)	LevelsProperty	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\LevelsProperty\CS\Unit.cs	55	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Loads	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\LoadCaseDeal.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Loads	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\LoadCaseDeal.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Loads	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\LoadCaseDeal.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Loads	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\LoadCaseDeal.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Loads	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\LoadCaseDeal.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Loads	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\LoadCaseDeal.cs	43	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Loads	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\LoadCaseMap.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Loads	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\LoadCaseMap.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Loads	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\LoadCaseMap.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Loads	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\LoadCaseMap.cs	32	Active
Error	CS0246	The type or namespace name 'LoadCase' could not be found (are you missing a using directive or an assembly reference?)	Loads	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\LoadCaseMap.cs	41	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Loads	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\LoadCaseMap.cs	44	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Loads	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\LoadCaseMap.cs	45	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Loads	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\LoadCaseMap.cs	77	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Loads	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\LoadCaseMap.cs	93	Active
Error	CS0246	The type or namespace name 'LoadCase' could not be found (are you missing a using directive or an assembly reference?)	Loads	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\LoadCaseMap.cs	110	Active
Error	CS0246	The type or namespace name 'LoadNature' could not be found (are you missing a using directive or an assembly reference?)	Loads	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\LoadCaseMap.cs	125	Active
Error	CS0246	The type or namespace name 'LoadNature' could not be found (are you missing a using directive or an assembly reference?)	Loads	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\LoadCaseMap.cs	148	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Loads	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\LoadCaseTabPage.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Loads	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\LoadCombinationDeal.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Loads	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\LoadCombinationDeal.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Loads	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\LoadCombinationDeal.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Loads	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\LoadCombinationDeal.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Loads	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\LoadCombinationDeal.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Loads	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\LoadCombinationDeal.cs	44	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Loads	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\LoadCombinationDeal.cs	45	Active
Error	CS0246	The type or namespace name 'LoadUsage' could not be found (are you missing a using directive or an assembly reference?)	Loads	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\LoadCombinationDeal.cs	384	Active
Error	CS0246	The type or namespace name 'LoadCase' could not be found (are you missing a using directive or an assembly reference?)	Loads	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\LoadCombinationDeal.cs	403	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Loads	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\LoadCombinationMap.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Loads	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\LoadCombinationMap.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Loads	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\LoadCombinationMap.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Loads	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\LoadCombinationMap.cs	31	Active
Error	CS0246	The type or namespace name 'LoadCombination' could not be found (are you missing a using directive or an assembly reference?)	Loads	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\LoadCombinationMap.cs	110	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Loads	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\LoadCombinationsTabPage.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Loads	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\LoadCombinationUsageMap.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Loads	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\Loads.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Loads	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\Loads.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Loads	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\Loads.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Loads	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\Loads.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Loads	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\Loads.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Loads	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\Loads.cs	40	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	Loads	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\Loads.cs	40	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Loads	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\Loads.cs	41	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	Loads	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\Loads.cs	41	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Loads	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\Loads.cs	42	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	Loads	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\Loads.cs	42	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	Loads	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\Loads.cs	43	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Loads	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\Loads.cs	47	Active
Error	CS0246	The type or namespace name 'LoadUsage' could not be found (are you missing a using directive or an assembly reference?)	Loads	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\Loads.cs	54	Active
Error	CS0246	The type or namespace name 'Category' could not be found (are you missing a using directive or an assembly reference?)	Loads	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\Loads.cs	62	Active
Error	CS0246	The type or namespace name 'LoadCase' could not be found (are you missing a using directive or an assembly reference?)	Loads	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\Loads.cs	63	Active
Error	CS0246	The type or namespace name 'LoadNature' could not be found (are you missing a using directive or an assembly reference?)	Loads	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\Loads.cs	64	Active
Error	CS0246	The type or namespace name 'LoadNature' could not be found (are you missing a using directive or an assembly reference?)	Loads	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\Loads.cs	97	Active
Error	CS0246	The type or namespace name 'LoadCase' could not be found (are you missing a using directive or an assembly reference?)	Loads	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\Loads.cs	108	Active
Error	CS0246	The type or namespace name 'Category' could not be found (are you missing a using directive or an assembly reference?)	Loads	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\Loads.cs	119	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Loads	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\Loads.cs	141	Active
Error	CS0246	The type or namespace name 'LoadUsage' could not be found (are you missing a using directive or an assembly reference?)	Loads	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\Loads.cs	163	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Loads	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\Loads.cs	268	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	Loads	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\Loads.cs	268	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Loads	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\Loads.cs	269	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ManipulateForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\ManipulateForm\CS\Command.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ManipulateForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\ManipulateForm\CS\Command.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ManipulateForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\ManipulateForm\CS\Command.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ManipulateForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\ManipulateForm\CS\Command.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ManipulateForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\ManipulateForm\CS\Command.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ManipulateForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\ManipulateForm\CS\Command.cs	40	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	ManipulateForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\ManipulateForm\CS\Command.cs	40	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ManipulateForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\ManipulateForm\CS\Command.cs	41	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	ManipulateForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\ManipulateForm\CS\Command.cs	41	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ManipulateForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\ManipulateForm\CS\Command.cs	42	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	ManipulateForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\ManipulateForm\CS\Command.cs	42	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	ManipulateForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\ManipulateForm\CS\Command.cs	43	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	ManipulateForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\ManipulateForm\CS\Command.cs	48	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ManipulateForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\ManipulateForm\CS\Command.cs	110	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	ManipulateForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\ManipulateForm\CS\Command.cs	110	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ManipulateForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\ManipulateForm\CS\Command.cs	111	Active
Error	CS0246	The type or namespace name 'Form' could not be found (are you missing a using directive or an assembly reference?)	ManipulateForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\ManipulateForm\CS\Command.cs	163	Active
Error	CS0246	The type or namespace name 'ReferenceArray' could not be found (are you missing a using directive or an assembly reference?)	ManipulateForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\ManipulateForm\CS\Command.cs	185	Active
Error	CS0246	The type or namespace name 'Form' could not be found (are you missing a using directive or an assembly reference?)	ManipulateForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\ManipulateForm\CS\Command.cs	219	Active
Error	CS0246	The type or namespace name 'Form' could not be found (are you missing a using directive or an assembly reference?)	ManipulateForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\ManipulateForm\CS\Command.cs	236	Active
Error	CS0246	The type or namespace name 'Form' could not be found (are you missing a using directive or an assembly reference?)	ManipulateForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\ManipulateForm\CS\Command.cs	250	Active
Error	CS0246	The type or namespace name 'Form' could not be found (are you missing a using directive or an assembly reference?)	ManipulateForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\ManipulateForm\CS\Command.cs	291	Active
Error	CS0246	The type or namespace name 'Form' could not be found (are you missing a using directive or an assembly reference?)	ManipulateForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\ManipulateForm\CS\Command.cs	323	Active
Error	CS0246	The type or namespace name 'Reference' could not be found (are you missing a using directive or an assembly reference?)	ManipulateForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\ManipulateForm\CS\Command.cs	348	Active
Error	CS0246	The type or namespace name 'Form' could not be found (are you missing a using directive or an assembly reference?)	ManipulateForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\ManipulateForm\CS\Command.cs	348	Active
Error	CS0246	The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)	ManipulateForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\ManipulateForm\CS\Command.cs	377	Active
Error	CS0246	The type or namespace name 'Form' could not be found (are you missing a using directive or an assembly reference?)	ManipulateForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\ManipulateForm\CS\Command.cs	377	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ManipulateForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\ManipulateForm\CS\Command.cs	377	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ManipulateForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\ManipulateForm\CS\Command.cs	377	Active
Error	CS0246	The type or namespace name 'Form' could not be found (are you missing a using directive or an assembly reference?)	ManipulateForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\ManipulateForm\CS\Command.cs	420	Active
Error	CS0246	The type or namespace name 'Reference' could not be found (are you missing a using directive or an assembly reference?)	ManipulateForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\ManipulateForm\CS\Command.cs	420	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ManipulateForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\ManipulateForm\CS\Command.cs	420	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	MaterialProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\CS\MaterialProperties.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	MaterialProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\CS\MaterialProperties.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	MaterialProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\CS\MaterialProperties.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	MaterialProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\CS\MaterialProperties.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	MaterialProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\CS\MaterialProperties.cs	35	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	MaterialProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\CS\MaterialProperties.cs	44	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	MaterialProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\CS\MaterialProperties.cs	44	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	MaterialProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\CS\MaterialProperties.cs	45	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	MaterialProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\CS\MaterialProperties.cs	45	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	MaterialProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\CS\MaterialProperties.cs	46	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	MaterialProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\CS\MaterialProperties.cs	46	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	MaterialProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\CS\MaterialProperties.cs	47	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	MaterialProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\CS\MaterialProperties.cs	54	Active
Error	CS0246	The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)	MaterialProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\CS\MaterialProperties.cs	56	Active
Error	CS0246	The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)	MaterialProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\CS\MaterialProperties.cs	57	Active
Error	CS0246	The type or namespace name 'StructuralAssetClass' could not be found (are you missing a using directive or an assembly reference?)	MaterialProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\CS\MaterialProperties.cs	66	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	MaterialProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\CS\MaterialProperties.cs	160	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	MaterialProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\CS\MaterialProperties.cs	160	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	MaterialProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\CS\MaterialProperties.cs	161	Active
Error	CS0246	The type or namespace name 'StructuralAssetClass' could not be found (are you missing a using directive or an assembly reference?)	MaterialProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\CS\MaterialProperties.cs	194	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	MaterialProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\CS\MaterialProperties.cs	420	Active
Error	CS0246	The type or namespace name 'StructuralAssetClass' could not be found (are you missing a using directive or an assembly reference?)	MaterialProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\CS\MaterialProperties.cs	591	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	MaterialProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\CS\MaterialProperties.cs	630	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	MaterialProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\CS\MaterialProperties.cs	641	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	MaterialProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\CS\MaterialProperties.cs	661	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	MaterialProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\CS\MaterialPropertiesForm.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	MaterialProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\CS\MaterialPropertiesForm.cs	32	Active
Error	BC40056	Namespace or type specified in the Imports 'Autodesk.Revit.DB' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.	MaterialProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\VB.NET\MaterialProperties.vb	30	Active
Error	BC40056	Namespace or type specified in the Imports 'Autodesk.Revit.UI' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.	MaterialProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\VB.NET\MaterialProperties.vb	31	Active
Error	BC40056	Namespace or type specified in the Imports 'Autodesk.Revit.DB.Structure' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.	MaterialProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\VB.NET\MaterialProperties.vb	32	Active
Error	BC30002	Type 'Autodesk.Revit.Attributes.Transaction' is not defined.	MaterialProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\VB.NET\MaterialProperties.vb	44	Active
Error	BC30451	'Autodesk' is not declared. It may be inaccessible due to its protection level.	MaterialProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\VB.NET\MaterialProperties.vb	44	Active
Error	BC30002	Type 'Autodesk.Revit.Attributes.Regeneration' is not defined.	MaterialProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\VB.NET\MaterialProperties.vb	45	Active
Error	BC30451	'Autodesk' is not declared. It may be inaccessible due to its protection level.	MaterialProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\VB.NET\MaterialProperties.vb	45	Active
Error	BC30002	Type 'Autodesk.Revit.Attributes.Journaling' is not defined.	MaterialProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\VB.NET\MaterialProperties.vb	46	Active
Error	BC30451	'Autodesk' is not declared. It may be inaccessible due to its protection level.	MaterialProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\VB.NET\MaterialProperties.vb	46	Active
Error	BC30002	Type 'Autodesk.Revit.UI.IExternalCommand' is not defined.	MaterialProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\VB.NET\MaterialProperties.vb	48	Active
Error	BC30002	Type 'Autodesk.Revit.UI.UIApplication' is not defined.	MaterialProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\VB.NET\MaterialProperties.vb	59	Active
Error	BC30002	Type 'Autodesk.Revit.DB.FamilyInstance' is not defined.	MaterialProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\VB.NET\MaterialProperties.vb	64	Active
Error	BC30002	Type 'Parameter' is not defined.	MaterialProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\VB.NET\MaterialProperties.vb	67	Active
Error	BC30002	Type 'StructuralAssetClass' is not defined.	MaterialProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\VB.NET\MaterialProperties.vb	75	Active
Error	BC30002	Type 'Autodesk.Revit.UI.ExternalCommandData' is not defined.	MaterialProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\VB.NET\MaterialProperties.vb	159	Active
Error	BC30002	Type 'Autodesk.Revit.DB.ElementSet' is not defined.	MaterialProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\VB.NET\MaterialProperties.vb	161	Active
Error	BC30002	Type 'Autodesk.Revit.UI.Result' is not defined.	MaterialProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\VB.NET\MaterialProperties.vb	162	Active
Error	BC30002	Type 'Autodesk.Revit.UI.IExternalCommand' is not defined.	MaterialProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\VB.NET\MaterialProperties.vb	162	Active
Error	BC30002	Type 'StructuralAssetClass' is not defined.	MaterialProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\VB.NET\MaterialProperties.vb	189	Active
Error	BC30002	Type 'Autodesk.Revit.DB.Material' is not defined.	MaterialProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\VB.NET\MaterialProperties.vb	367	Active
Error	BC30002	Type 'Autodesk.Revit.DB.Material' is not defined.	MaterialProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\VB.NET\MaterialProperties.vb	514	Active
Error	BC30002	Type 'StructuralAssetClass' is not defined.	MaterialProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\VB.NET\MaterialProperties.vb	514	Active
Error	BC30002	Type 'Autodesk.Revit.DB.Material' is not defined.	MaterialProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\VB.NET\MaterialProperties.vb	549	Active
Error	BC30002	Type 'Autodesk.Revit.DB.Material' is not defined.	MaterialProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\VB.NET\MaterialProperties.vb	555	Active
Error	BC30002	Type 'Autodesk.Revit.DB.Material' is not defined.	MaterialProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\VB.NET\MaterialProperties.vb	568	Active
Error	BC40056	Namespace or type specified in the Imports 'Autodesk.Revit.DB' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.	MaterialProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\VB.NET\MaterialPropertiesForm.vb	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	MaterialQuantities	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialQuantities\CS\MaterialQuantities.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	MaterialQuantities	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialQuantities\CS\MaterialQuantities.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	MaterialQuantities	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialQuantities\CS\MaterialQuantities.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	MaterialQuantities	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialQuantities\CS\MaterialQuantities.cs	39	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	MaterialQuantities	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialQuantities\CS\MaterialQuantities.cs	39	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	MaterialQuantities	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialQuantities\CS\MaterialQuantities.cs	40	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	MaterialQuantities	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialQuantities\CS\MaterialQuantities.cs	40	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	MaterialQuantities	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialQuantities\CS\MaterialQuantities.cs	41	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	MaterialQuantities	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialQuantities\CS\MaterialQuantities.cs	41	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	MaterialQuantities	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialQuantities\CS\MaterialQuantities.cs	43	Active
Error	CS0246	The type or namespace name 'AddInId' could not be found (are you missing a using directive or an assembly reference?)	MaterialQuantities	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialQuantities\CS\MaterialQuantities.cs	45	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	MaterialQuantities	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialQuantities\CS\MaterialQuantities.cs	62	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	MaterialQuantities	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialQuantities\CS\MaterialQuantities.cs	62	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	MaterialQuantities	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialQuantities\CS\MaterialQuantities.cs	64	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	MaterialQuantities	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialQuantities\CS\MaterialQuantities.cs	96	Active
Error	CS0246	The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)	MaterialQuantities	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialQuantities\CS\MaterialQuantities.cs	163	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	MaterialQuantities	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialQuantities\CS\MaterialQuantities.cs	178	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	MaterialQuantities	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialQuantities\CS\MaterialQuantities.cs	278	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	MaterialQuantities	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialQuantities\CS\MaterialQuantities.cs	279	Active
Error	CS0246	The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)	MaterialQuantities	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialQuantities\CS\MaterialQuantities.cs	317	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	MaterialQuantities	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialQuantities\CS\MaterialQuantities.cs	393	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	MaterialQuantities	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialQuantities\CS\MaterialQuantities.cs	413	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	MaterialQuantities	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialQuantities\CS\MaterialQuantities.cs	413	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	MaterialQuantities	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialQuantities\CS\MaterialQuantities.cs	418	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	MaterialQuantities	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialQuantities\CS\MaterialQuantities.cs	431	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	MeasureHeight	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\MeasureHeight\CS\MeasureHeight.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	MeasureHeight	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\MeasureHeight\CS\MeasureHeight.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	MeasureHeight	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\MeasureHeight\CS\MeasureHeight.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	MeasureHeight	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\MeasureHeight\CS\MeasureHeight.cs	38	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	MeasureHeight	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\MeasureHeight\CS\MeasureHeight.cs	38	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	MeasureHeight	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\MeasureHeight\CS\MeasureHeight.cs	39	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	MeasureHeight	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\MeasureHeight\CS\MeasureHeight.cs	39	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	MeasureHeight	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\MeasureHeight\CS\MeasureHeight.cs	40	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	MeasureHeight	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\MeasureHeight\CS\MeasureHeight.cs	40	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	MeasureHeight	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\MeasureHeight\CS\MeasureHeight.cs	41	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	MeasureHeight	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\MeasureHeight\CS\MeasureHeight.cs	47	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	MeasureHeight	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\MeasureHeight\CS\MeasureHeight.cs	52	Active
Error	CS0246	The type or namespace name 'View3D' could not be found (are you missing a using directive or an assembly reference?)	MeasureHeight	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\MeasureHeight\CS\MeasureHeight.cs	57	Active
Error	CS0246	The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)	MeasureHeight	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\MeasureHeight\CS\MeasureHeight.cs	62	Active
Error	CS0246	The type or namespace name 'Floor' could not be found (are you missing a using directive or an assembly reference?)	MeasureHeight	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\MeasureHeight\CS\MeasureHeight.cs	67	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	MeasureHeight	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\MeasureHeight\CS\MeasureHeight.cs	87	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	MeasureHeight	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\MeasureHeight\CS\MeasureHeight.cs	87	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	MeasureHeight	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\MeasureHeight\CS\MeasureHeight.cs	87	Active
Error	CS0246	The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)	MeasureHeight	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\MeasureHeight\CS\MeasureHeight.cs	153	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	MeasurePanelArea	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\MeasurePanelArea\CS\Command.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	MeasurePanelArea	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\MeasurePanelArea\CS\Command.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	MeasurePanelArea	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\MeasurePanelArea\CS\Command.cs	35	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	MeasurePanelArea	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\MeasurePanelArea\CS\Command.cs	35	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	MeasurePanelArea	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\MeasurePanelArea\CS\Command.cs	36	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	MeasurePanelArea	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\MeasurePanelArea\CS\Command.cs	36	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	MeasurePanelArea	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\MeasurePanelArea\CS\Command.cs	37	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	MeasurePanelArea	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\MeasurePanelArea\CS\Command.cs	37	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	MeasurePanelArea	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\MeasurePanelArea\CS\Command.cs	38	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	MeasurePanelArea	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\MeasurePanelArea\CS\Command.cs	56	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	MeasurePanelArea	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\MeasurePanelArea\CS\Command.cs	56	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	MeasurePanelArea	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\MeasurePanelArea\CS\Command.cs	56	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	MeasurePanelArea	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\MeasurePanelArea\CS\FormPanelArea.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	MeasurePanelArea	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\MeasurePanelArea\CS\FormPanelArea.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	MeasurePanelArea	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\MeasurePanelArea\CS\FormPanelArea.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	MeasurePanelArea	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\MeasurePanelArea\CS\FormPanelArea.cs	34	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	MeasurePanelArea	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\MeasurePanelArea\CS\FormPanelArea.cs	35	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	MeasurePanelArea	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\MeasurePanelArea\CS\FormPanelArea.cs	36	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	MeasurePanelArea	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\MeasurePanelArea\CS\FormPanelArea.cs	48	Active
Error	CS0246	The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)	MeasurePanelArea	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\MeasurePanelArea\CS\FormPanelArea.cs	52	Active
Error	CS0246	The type or namespace name 'DividedSurface' could not be found (are you missing a using directive or an assembly reference?)	MeasurePanelArea	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\MeasurePanelArea\CS\FormPanelArea.cs	91	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	MeasurePanelArea	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\MeasurePanelArea\CS\FormPanelArea.cs	104	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	MeasurePanelArea	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\MeasurePanelArea\CS\FormPanelArea.cs	149	Active
Error	CS0246	The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)	MeasurePanelArea	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\MeasurePanelArea\CS\FormPanelArea.cs	227	Active
Error	CS0246	The type or namespace name 'DividedSurface' could not be found (are you missing a using directive or an assembly reference?)	MeasurePanelArea	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\MeasurePanelArea\CS\FormPanelArea.cs	286	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ModelLines	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelLines\CS\Command.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ModelLines	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelLines\CS\Command.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ModelLines	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelLines\CS\Command.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ModelLines	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelLines\CS\Command.cs	36	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	ModelLines	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelLines\CS\Command.cs	36	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ModelLines	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelLines\CS\Command.cs	37	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	ModelLines	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelLines\CS\Command.cs	37	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ModelLines	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelLines\CS\Command.cs	38	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	ModelLines	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelLines\CS\Command.cs	38	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	ModelLines	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelLines\CS\Command.cs	39	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ModelLines	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelLines\CS\Command.cs	57	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ModelLines	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelLines\CS\Command.cs	57	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	ModelLines	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelLines\CS\Command.cs	59	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ModelLines	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelLines\CS\Information.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ModelLines	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelLines\CS\Information.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ModelLines	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelLines\CS\ModelLines.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ModelLines	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelLines\CS\ModelLines.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ModelLines	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelLines\CS\ModelLines.cs	42	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ModelLines	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelLines\CS\ModelLines.cs	43	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ModelLines	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelLines\CS\ModelLines.cs	44	Active
Error	CS0246	The type or namespace name 'ModelCurveArray' could not be found (are you missing a using directive or an assembly reference?)	ModelLines	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelLines\CS\ModelLines.cs	46	Active
Error	CS0246	The type or namespace name 'ModelCurveArray' could not be found (are you missing a using directive or an assembly reference?)	ModelLines	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelLines\CS\ModelLines.cs	47	Active
Error	CS0246	The type or namespace name 'ModelCurveArray' could not be found (are you missing a using directive or an assembly reference?)	ModelLines	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelLines\CS\ModelLines.cs	48	Active
Error	CS0246	The type or namespace name 'ModelCurveArray' could not be found (are you missing a using directive or an assembly reference?)	ModelLines	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelLines\CS\ModelLines.cs	49	Active
Error	CS0246	The type or namespace name 'ModelCurveArray' could not be found (are you missing a using directive or an assembly reference?)	ModelLines	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelLines\CS\ModelLines.cs	50	Active
Error	CS0246	The type or namespace name 'SketchPlane' could not be found (are you missing a using directive or an assembly reference?)	ModelLines	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelLines\CS\ModelLines.cs	51	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ModelLines	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelLines\CS\ModelLines.cs	159	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ModelLines	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelLines\CS\ModelLines.cs	208	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ModelLines	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelLines\CS\ModelLines.cs	208	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ModelLines	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelLines\CS\ModelLines.cs	241	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ModelLines	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelLines\CS\ModelLines.cs	241	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ModelLines	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelLines\CS\ModelLines.cs	287	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ModelLines	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelLines\CS\ModelLines.cs	287	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ModelLines	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelLines\CS\ModelLines.cs	287	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ModelLines	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelLines\CS\ModelLines.cs	332	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ModelLines	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelLines\CS\ModelLines.cs	505	Active
Error	CS0246	The type or namespace name 'SketchPlane' could not be found (are you missing a using directive or an assembly reference?)	ModelLines	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelLines\CS\ModelLines.cs	520	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ModelLines	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelLines\CS\ModelLinesForm.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ModelLines	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelLines\CS\PointUserControl.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ModelLines	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelLines\CS\PointUserControl.cs	66	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ModelLines	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelLines\CS\SketchPlaneForm.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ModelLines	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelLines\CS\SketchPlaneForm.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ModelessForm_ExternalEvent	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_ExternalEvent\CS\Application.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ModelessForm_ExternalEvent	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_ExternalEvent\CS\Application.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ModelessForm_ExternalEvent	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_ExternalEvent\CS\Application.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ModelessForm_ExternalEvent	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_ExternalEvent\CS\Application.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ModelessForm_ExternalEvent	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_ExternalEvent\CS\Application.cs	33	Active
Error	CS0246	The type or namespace name 'IExternalApplication' could not be found (are you missing a using directive or an assembly reference?)	ModelessForm_ExternalEvent	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_ExternalEvent\CS\Application.cs	40	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	ModelessForm_ExternalEvent	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_ExternalEvent\CS\Application.cs	53	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	ModelessForm_ExternalEvent	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_ExternalEvent\CS\Application.cs	53	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	ModelessForm_ExternalEvent	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_ExternalEvent\CS\Application.cs	68	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	ModelessForm_ExternalEvent	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_ExternalEvent\CS\Application.cs	68	Active
Error	CS0246	The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)	ModelessForm_ExternalEvent	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_ExternalEvent\CS\Application.cs	83	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ModelessForm_ExternalEvent	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_ExternalEvent\CS\Command.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ModelessForm_ExternalEvent	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_ExternalEvent\CS\Command.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ModelessForm_ExternalEvent	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_ExternalEvent\CS\Command.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ModelessForm_ExternalEvent	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_ExternalEvent\CS\Command.cs	38	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	ModelessForm_ExternalEvent	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_ExternalEvent\CS\Command.cs	38	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ModelessForm_ExternalEvent	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_ExternalEvent\CS\Command.cs	39	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	ModelessForm_ExternalEvent	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_ExternalEvent\CS\Command.cs	39	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	ModelessForm_ExternalEvent	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_ExternalEvent\CS\Command.cs	40	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	ModelessForm_ExternalEvent	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_ExternalEvent\CS\Command.cs	58	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	ModelessForm_ExternalEvent	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_ExternalEvent\CS\Command.cs	58	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	ModelessForm_ExternalEvent	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_ExternalEvent\CS\Command.cs	59	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ModelessForm_ExternalEvent	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_ExternalEvent\CS\ModelessForm.cs	24	Active
Error	CS0246	The type or namespace name 'ExternalEvent' could not be found (are you missing a using directive or an assembly reference?)	ModelessForm_ExternalEvent	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_ExternalEvent\CS\ModelessForm.cs	45	Active
Error	CS0246	The type or namespace name 'ExternalEvent' could not be found (are you missing a using directive or an assembly reference?)	ModelessForm_ExternalEvent	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_ExternalEvent\CS\ModelessForm.cs	52	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ModelessForm_ExternalEvent	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_ExternalEvent\CS\RequestHandler.cs	25	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ModelessForm_ExternalEvent	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_ExternalEvent\CS\RequestHandler.cs	26	Active
Error	CS0246	The type or namespace name 'IExternalEventHandler' could not be found (are you missing a using directive or an assembly reference?)	ModelessForm_ExternalEvent	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_ExternalEvent\CS\RequestHandler.cs	34	Active
Error	CS0246	The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)	ModelessForm_ExternalEvent	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_ExternalEvent\CS\RequestHandler.cs	37	Active
Error	CS0246	The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)	ModelessForm_ExternalEvent	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_ExternalEvent\CS\RequestHandler.cs	69	Active
Error	CS0246	The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)	ModelessForm_ExternalEvent	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_ExternalEvent\CS\RequestHandler.cs	147	Active
Error	CS0246	The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)	ModelessForm_ExternalEvent	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_ExternalEvent\CS\RequestHandler.cs	193	Active
Error	CS0246	The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)	ModelessForm_ExternalEvent	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_ExternalEvent\CS\RequestHandler.cs	203	Active
Error	CS0246	The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)	ModelessForm_ExternalEvent	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_ExternalEvent\CS\RequestHandler.cs	208	Active
Error	CS0246	The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)	ModelessForm_ExternalEvent	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_ExternalEvent\CS\RequestHandler.cs	220	Active
Error	CS0246	The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)	ModelessForm_ExternalEvent	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_ExternalEvent\CS\RequestHandler.cs	225	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ModelessForm_IdlingEvent	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_IdlingEvent\CS\Application.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ModelessForm_IdlingEvent	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_IdlingEvent\CS\Application.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ModelessForm_IdlingEvent	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_IdlingEvent\CS\Application.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ModelessForm_IdlingEvent	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_IdlingEvent\CS\Application.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ModelessForm_IdlingEvent	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_IdlingEvent\CS\Application.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ModelessForm_IdlingEvent	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_IdlingEvent\CS\Application.cs	34	Active
Error	CS0246	The type or namespace name 'IExternalApplication' could not be found (are you missing a using directive or an assembly reference?)	ModelessForm_IdlingEvent	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_IdlingEvent\CS\Application.cs	41	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	ModelessForm_IdlingEvent	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_IdlingEvent\CS\Application.cs	54	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	ModelessForm_IdlingEvent	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_IdlingEvent\CS\Application.cs	54	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	ModelessForm_IdlingEvent	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_IdlingEvent\CS\Application.cs	73	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	ModelessForm_IdlingEvent	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_IdlingEvent\CS\Application.cs	73	Active
Error	CS0246	The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)	ModelessForm_IdlingEvent	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_IdlingEvent\CS\Application.cs	88	Active
Error	CS0246	The type or namespace name 'IdlingEventArgs' could not be found (are you missing a using directive or an assembly reference?)	ModelessForm_IdlingEvent	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_IdlingEvent\CS\Application.cs	112	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ModelessForm_IdlingEvent	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_IdlingEvent\CS\Command.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ModelessForm_IdlingEvent	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_IdlingEvent\CS\Command.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ModelessForm_IdlingEvent	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_IdlingEvent\CS\Command.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ModelessForm_IdlingEvent	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_IdlingEvent\CS\Command.cs	38	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	ModelessForm_IdlingEvent	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_IdlingEvent\CS\Command.cs	38	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ModelessForm_IdlingEvent	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_IdlingEvent\CS\Command.cs	39	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	ModelessForm_IdlingEvent	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_IdlingEvent\CS\Command.cs	39	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	ModelessForm_IdlingEvent	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_IdlingEvent\CS\Command.cs	40	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	ModelessForm_IdlingEvent	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_IdlingEvent\CS\Command.cs	58	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	ModelessForm_IdlingEvent	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_IdlingEvent\CS\Command.cs	58	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	ModelessForm_IdlingEvent	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_IdlingEvent\CS\Command.cs	59	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ModelessForm_IdlingEvent	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_IdlingEvent\CS\RequestHandler.cs	25	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ModelessForm_IdlingEvent	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_IdlingEvent\CS\RequestHandler.cs	26	Active
Error	CS0246	The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)	ModelessForm_IdlingEvent	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_IdlingEvent\CS\RequestHandler.cs	37	Active
Error	CS0246	The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)	ModelessForm_IdlingEvent	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_IdlingEvent\CS\RequestHandler.cs	44	Active
Error	CS0246	The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)	ModelessForm_IdlingEvent	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_IdlingEvent\CS\RequestHandler.cs	115	Active
Error	CS0246	The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)	ModelessForm_IdlingEvent	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_IdlingEvent\CS\RequestHandler.cs	161	Active
Error	CS0246	The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)	ModelessForm_IdlingEvent	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_IdlingEvent\CS\RequestHandler.cs	171	Active
Error	CS0246	The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)	ModelessForm_IdlingEvent	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_IdlingEvent\CS\RequestHandler.cs	176	Active
Error	CS0246	The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)	ModelessForm_IdlingEvent	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_IdlingEvent\CS\RequestHandler.cs	188	Active
Error	CS0246	The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)	ModelessForm_IdlingEvent	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_IdlingEvent\CS\RequestHandler.cs	193	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	MoveLinear	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MoveLinear\CS\Command.cs	25	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	MoveLinear	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MoveLinear\CS\Command.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	MoveLinear	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MoveLinear\CS\Command.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	MoveLinear	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MoveLinear\CS\Command.cs	34	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	MoveLinear	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MoveLinear\CS\Command.cs	34	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	MoveLinear	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MoveLinear\CS\Command.cs	35	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	MoveLinear	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MoveLinear\CS\Command.cs	35	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	MoveLinear	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MoveLinear\CS\Command.cs	36	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	MoveLinear	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MoveLinear\CS\Command.cs	36	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	MoveLinear	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MoveLinear\CS\Command.cs	37	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	MoveLinear	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MoveLinear\CS\Command.cs	56	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	MoveLinear	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MoveLinear\CS\Command.cs	56	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	MoveLinear	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MoveLinear\CS\Command.cs	56	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	MultiplanarRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\Command.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	MultiplanarRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\Command.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	MultiplanarRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\Command.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	MultiplanarRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\Command.cs	36	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	MultiplanarRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\Command.cs	36	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	MultiplanarRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\Command.cs	37	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	MultiplanarRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\Command.cs	37	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	MultiplanarRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\Command.cs	38	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	MultiplanarRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\Command.cs	38	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	MultiplanarRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\Command.cs	39	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	MultiplanarRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\Command.cs	58	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	MultiplanarRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\Command.cs	58	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	MultiplanarRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\Command.cs	59	Active
Error	CS0246	The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)	MultiplanarRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\Command.cs	155	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	MultiplanarRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\CorbelFrame.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	MultiplanarRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\CorbelFrame.cs	28	Active
Error	CS0246	The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)	MultiplanarRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\CorbelFrame.cs	51	Active
Error	CS0246	The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)	MultiplanarRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\CorbelFrame.cs	56	Active
Error	CS0246	The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)	MultiplanarRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\CorbelFrame.cs	61	Active
Error	CS0246	The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)	MultiplanarRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\CorbelFrame.cs	66	Active
Error	CS0246	The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)	MultiplanarRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\CorbelFrame.cs	75	Active
Error	CS0246	The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)	MultiplanarRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\CorbelFrame.cs	75	Active
Error	CS0246	The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)	MultiplanarRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\CorbelFrame.cs	75	Active
Error	CS0246	The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)	MultiplanarRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\CorbelFrame.cs	75	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	MultiplanarRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\CorbelFrame.cs	88	Active
Error	CS0246	The type or namespace name 'RebarShape' could not be found (are you missing a using directive or an assembly reference?)	MultiplanarRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\CorbelFrame.cs	204	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	MultiplanarRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\CorbelFrame.cs	204	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	MultiplanarRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\CorbelFrame.cs	294	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	MultiplanarRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\CorbelFrame.cs	294	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	MultiplanarRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\CorbelFrame.cs	294	Active
Error	CS0246	The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)	MultiplanarRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\CorbelFrame.cs	316	Active
Error	CS0246	The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)	MultiplanarRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\CorbelFrame.cs	321	Active
Error	CS0246	The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)	MultiplanarRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\CorbelFrame.cs	346	Active
Error	CS0246	The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)	MultiplanarRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\CorbelFrame.cs	347	Active
Error	CS0246	The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)	MultiplanarRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\CorbelFrame.cs	366	Active
Error	CS0246	The type or namespace name 'Rebar' could not be found (are you missing a using directive or an assembly reference?)	MultiplanarRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\CorbelFrame.cs	574	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	MultiplanarRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\CorbelReinforcementOptions.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	MultiplanarRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\CorbelReinforcementOptions.cs	28	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	MultiplanarRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\CorbelReinforcementOptions.cs	41	Active
Error	CS0246	The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)	MultiplanarRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\CorbelReinforcementOptions.cs	46	Active
Error	CS0246	The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)	MultiplanarRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\CorbelReinforcementOptions.cs	51	Active
Error	CS0246	The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)	MultiplanarRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\CorbelReinforcementOptions.cs	56	Active
Error	CS0246	The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)	MultiplanarRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\CorbelReinforcementOptions.cs	61	Active
Error	CS0246	The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)	MultiplanarRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\CorbelReinforcementOptions.cs	66	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	MultiplanarRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\CorbelReinforcementOptions.cs	82	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	MultiplanarRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\CorbelReinforcementOptionsForm.cs	9	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	MultiplanarRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\CorbelReinforcementOptionsForm.cs	10	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	MultiplanarRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\GeometryUtil.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	MultiplanarRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\GeometryUtil.cs	28	Active
Error	CS0246	The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)	MultiplanarRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\GeometryUtil.cs	43	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	MultiplanarRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\GeometryUtil.cs	146	Active
Error	CS0246	The type or namespace name 'PlanarFace' could not be found (are you missing a using directive or an assembly reference?)	MultiplanarRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\GeometryUtil.cs	146	Active
Error	CS0246	The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)	MultiplanarRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\GeometryUtil.cs	146	Active
Error	CS0246	The type or namespace name 'PlanarFace' could not be found (are you missing a using directive or an assembly reference?)	MultiplanarRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\GeometryUtil.cs	147	Active
Error	CS0246	The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)	MultiplanarRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\GeometryUtil.cs	147	Active
Error	CS0246	The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)	MultiplanarRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\GeometryUtil.cs	148	Active
Error	CS0246	The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)	MultiplanarRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\GeometryUtil.cs	148	Active
Error	CS0246	The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)	MultiplanarRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\GeometryUtil.cs	215	Active
Error	CS0246	The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)	MultiplanarRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\GeometryUtil.cs	216	Active
Error	CS0246	The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)	MultiplanarRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\GeometryUtil.cs	216	Active
Error	CS0246	The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)	MultiplanarRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\GeometryUtil.cs	216	Active
Error	CS0246	The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)	MultiplanarRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\GeometryUtil.cs	216	Active
Error	CS0246	The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)	MultiplanarRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\GeometryUtil.cs	216	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	MultiplanarRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\GeometryUtil.cs	217	Active
Error	CS0246	The type or namespace name 'PlanarFace' could not be found (are you missing a using directive or an assembly reference?)	MultiplanarRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\GeometryUtil.cs	217	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	MultiplanarRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\GeometryUtil.cs	272	Active
Error	CS0246	The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)	MultiplanarRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\GeometryUtil.cs	272	Active
Error	CS0246	The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)	MultiplanarRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\GeometryUtil.cs	272	Active
Error	CS0246	The type or namespace name 'Solid' could not be found (are you missing a using directive or an assembly reference?)	MultiplanarRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\GeometryUtil.cs	298	Active
Error	CS0246	The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)	MultiplanarRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\GeometryUtil.cs	298	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	MultiplanarRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\GeometryUtil.cs	348	Active
Error	CS0246	The type or namespace name 'Face' could not be found (are you missing a using directive or an assembly reference?)	MultiplanarRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\GeometryUtil.cs	348	Active
Error	CS0246	The type or namespace name 'PlanarFace' could not be found (are you missing a using directive or an assembly reference?)	MultiplanarRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\GeometryUtil.cs	362	Active
Error	CS0246	The type or namespace name 'PlanarFace' could not be found (are you missing a using directive or an assembly reference?)	MultiplanarRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\GeometryUtil.cs	362	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	MultiplanarRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\SharedParameterUtil.cs	24	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	MultiplanarRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\SharedParameterUtil.cs	25	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	MultiplanarRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\SharedParameterUtil.cs	26	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	MultiplanarRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\SharedParameterUtil.cs	44	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	MultiplanarRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\SharedParameterUtil.cs	44	Active
Error	CS0246	The type or namespace name 'ExternalDefinition' could not be found (are you missing a using directive or an assembly reference?)	MultiplanarRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\SharedParameterUtil.cs	56	Active
Error	CS0246	The type or namespace name 'Application' could not be found (are you missing a using directive or an assembly reference?)	MultiplanarRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\SharedParameterUtil.cs	56	Active
Error	CS0246	The type or namespace name 'ExternalDefinition' could not be found (are you missing a using directive or an assembly reference?)	MultiplanarRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\SharedParameterUtil.cs	68	Active
Error	CS0246	The type or namespace name 'Application' could not be found (are you missing a using directive or an assembly reference?)	MultiplanarRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\SharedParameterUtil.cs	68	Active
Error	CS0246	The type or namespace name 'DefinitionFile' could not be found (are you missing a using directive or an assembly reference?)	MultiplanarRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\SharedParameterUtil.cs	91	Active
Error	CS0246	The type or namespace name 'Application' could not be found (are you missing a using directive or an assembly reference?)	MultiplanarRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\SharedParameterUtil.cs	91	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	MultithreadedCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\MultithreadedCalculation\CS\MultithreadedCalculation.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	MultithreadedCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\MultithreadedCalculation\CS\MultithreadedCalculation.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	MultithreadedCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\MultithreadedCalculation\CS\MultithreadedCalculation.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	MultithreadedCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\MultithreadedCalculation\CS\MultithreadedCalculation.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	MultithreadedCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\MultithreadedCalculation\CS\MultithreadedCalculation.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	MultithreadedCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\MultithreadedCalculation\CS\MultithreadedCalculation.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	MultithreadedCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\MultithreadedCalculation\CS\MultithreadedCalculation.cs	41	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	MultithreadedCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\MultithreadedCalculation\CS\MultithreadedCalculation.cs	41	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	MultithreadedCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\MultithreadedCalculation\CS\MultithreadedCalculation.cs	42	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	MultithreadedCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\MultithreadedCalculation\CS\MultithreadedCalculation.cs	42	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	MultithreadedCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\MultithreadedCalculation\CS\MultithreadedCalculation.cs	43	Active
Error	CS0246	The type or namespace name 'UpdaterId' could not be found (are you missing a using directive or an assembly reference?)	MultithreadedCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\MultithreadedCalculation\CS\MultithreadedCalculation.cs	45	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	MultithreadedCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\MultithreadedCalculation\CS\MultithreadedCalculation.cs	50	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	MultithreadedCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\MultithreadedCalculation\CS\MultithreadedCalculation.cs	51	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	MultithreadedCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\MultithreadedCalculation\CS\MultithreadedCalculation.cs	53	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	MultithreadedCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\MultithreadedCalculation\CS\MultithreadedCalculation.cs	53	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	MultithreadedCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\MultithreadedCalculation\CS\MultithreadedCalculation.cs	53	Active
Error	CS0246	The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)	MultithreadedCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\MultithreadedCalculation\CS\MultithreadedCalculation.cs	107	Active
Error	CS0246	The type or namespace name 'Face' could not be found (are you missing a using directive or an assembly reference?)	MultithreadedCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\MultithreadedCalculation\CS\MultithreadedCalculation.cs	136	Active
Error	CS0246	The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)	MultithreadedCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\MultithreadedCalculation\CS\MultithreadedCalculation.cs	136	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	MultithreadedCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\MultithreadedCalculation\CS\MultithreadedCalculation.cs	136	Active
Error	CS0246	The type or namespace name 'IUpdater' could not be found (are you missing a using directive or an assembly reference?)	MultithreadedCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\MultithreadedCalculation\CS\MultithreadedCalculation.cs	211	Active
Error	CS0246	The type or namespace name 'AddInId' could not be found (are you missing a using directive or an assembly reference?)	MultithreadedCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\MultithreadedCalculation\CS\MultithreadedCalculation.cs	216	Active
Error	CS0246	The type or namespace name 'UpdaterData' could not be found (are you missing a using directive or an assembly reference?)	MultithreadedCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\MultithreadedCalculation\CS\MultithreadedCalculation.cs	223	Active
Error	CS0246	The type or namespace name 'ChangePriority' could not be found (are you missing a using directive or an assembly reference?)	MultithreadedCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\MultithreadedCalculation\CS\MultithreadedCalculation.cs	250	Active
Error	CS0246	The type or namespace name 'UpdaterId' could not be found (are you missing a using directive or an assembly reference?)	MultithreadedCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\MultithreadedCalculation\CS\MultithreadedCalculation.cs	251	Active
Error	CS0246	The type or namespace name 'UV' could not be found (are you missing a using directive or an assembly reference?)	MultithreadedCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\MultithreadedCalculation\CS\MultithreadedCalculation.cs	261	Active
Error	CS0246	The type or namespace name 'UV' could not be found (are you missing a using directive or an assembly reference?)	MultithreadedCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\MultithreadedCalculation\CS\MultithreadedCalculation.cs	262	Active
Error	CS0246	The type or namespace name 'UV' could not be found (are you missing a using directive or an assembly reference?)	MultithreadedCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\MultithreadedCalculation\CS\MultithreadedCalculation.cs	266	Active
Error	CS0246	The type or namespace name 'UV' could not be found (are you missing a using directive or an assembly reference?)	MultithreadedCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\MultithreadedCalculation\CS\MultithreadedCalculation.cs	268	Active
Error	CS0246	The type or namespace name 'ValueAtPoint' could not be found (are you missing a using directive or an assembly reference?)	MultithreadedCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\MultithreadedCalculation\CS\MultithreadedCalculation.cs	269	Active
Error	CS0246	The type or namespace name 'UV' could not be found (are you missing a using directive or an assembly reference?)	MultithreadedCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\MultithreadedCalculation\CS\MultithreadedCalculation.cs	271	Active
Error	CS0246	The type or namespace name 'UV' could not be found (are you missing a using directive or an assembly reference?)	MultithreadedCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\MultithreadedCalculation\CS\MultithreadedCalculation.cs	271	Active
Error	CS0246	The type or namespace name 'IdlingEventArgs' could not be found (are you missing a using directive or an assembly reference?)	MultithreadedCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\MultithreadedCalculation\CS\MultithreadedCalculation.cs	299	Active
Error	CS0246	The type or namespace name 'UV' could not be found (are you missing a using directive or an assembly reference?)	MultithreadedCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\MultithreadedCalculation\CS\MultithreadedCalculation.cs	386	Active
Error	CS0246	The type or namespace name 'UV' could not be found (are you missing a using directive or an assembly reference?)	MultithreadedCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\MultithreadedCalculation\CS\MultithreadedCalculation.cs	409	Active
Error	CS0246	The type or namespace name 'UV' could not be found (are you missing a using directive or an assembly reference?)	MultithreadedCalculation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\MultithreadedCalculation\CS\MultithreadedCalculation.cs	411	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs	38	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	NewForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs	38	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs	39	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	NewForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs	39	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs	40	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	NewForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs	40	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	NewForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs	41	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs	60	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	NewForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs	60	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs	60	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs	104	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	NewForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs	104	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs	105	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	NewForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs	105	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	NewForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs	106	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs	125	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	NewForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs	125	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs	125	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs	167	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	NewForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs	167	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs	168	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	NewForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs	168	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	NewForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs	169	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs	188	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	NewForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs	188	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs	188	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs	236	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	NewForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs	236	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs	237	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	NewForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs	237	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	NewForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs	238	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs	257	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	NewForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs	257	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs	257	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs	326	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	NewForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs	326	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs	327	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	NewForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs	327	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	NewForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs	328	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs	347	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	NewForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs	347	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs	347	Active
Error	CS0246	The type or namespace name 'ModelCurve' could not be found (are you missing a using directive or an assembly reference?)	NewForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs	431	Active
Error	CS0246	The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)	NewForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs	431	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs	431	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs	431	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs	431	Active
Error	CS0246	The type or namespace name 'ModelCurve' could not be found (are you missing a using directive or an assembly reference?)	NewForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs	458	Active
Error	CS0246	The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)	NewForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs	458	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs	458	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs	458	Active
Error	CS0246	The type or namespace name 'ModelCurve' could not be found (are you missing a using directive or an assembly reference?)	NewForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs	479	Active
Error	CS0246	The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)	NewForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs	479	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs	479	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs	479	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs	479	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Command.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Command.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Command.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Command.cs	37	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Command.cs	37	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Command.cs	38	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Command.cs	38	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Command.cs	39	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Command.cs	39	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Command.cs	40	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Command.cs	60	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Command.cs	60	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Command.cs	61	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\CreationMgr.cs	40	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\CreationMgr.cs	106	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\FasciaCreator.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\FasciaCreator.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\FasciaCreator.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\FasciaCreator.cs	43	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\FasciaCreator.cs	51	Active
Error	CS0246	The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\FasciaCreator.cs	51	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\FasciaCreator.cs	57	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\FasciaCreator.cs	116	Active
Error	CS0246	The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\FasciaCreator.cs	116	Active
Error	CS0246	The type or namespace name 'HostedSweep' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\FasciaCreator.cs	158	Active
Error	CS0246	The type or namespace name 'ElementType' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\FasciaCreator.cs	158	Active
Error	CS0246	The type or namespace name 'ReferenceArray' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\FasciaCreator.cs	158	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\GutterCreator.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\GutterCreator.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\GutterCreator.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\GutterCreator.cs	43	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\GutterCreator.cs	51	Active
Error	CS0246	The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\GutterCreator.cs	51	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\GutterCreator.cs	57	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\GutterCreator.cs	116	Active
Error	CS0246	The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\GutterCreator.cs	116	Active
Error	CS0246	The type or namespace name 'HostedSweep' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\GutterCreator.cs	159	Active
Error	CS0246	The type or namespace name 'ElementType' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\GutterCreator.cs	159	Active
Error	CS0246	The type or namespace name 'ReferenceArray' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\GutterCreator.cs	159	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\HostedSweepCreator.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\HostedSweepCreator.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\HostedSweepCreator.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\HostedSweepCreator.cs	56	Active
Error	CS0246	The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\HostedSweepCreator.cs	56	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\HostedSweepCreator.cs	72	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\HostedSweepCreator.cs	125	Active
Error	CS0246	The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\HostedSweepCreator.cs	136	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\HostedSweepCreator.cs	154	Active
Error	CS0246	The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\HostedSweepCreator.cs	159	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\HostedSweepCreator.cs	164	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\HostedSweepCreator.cs	170	Active
Error	CS0246	The type or namespace name 'HostedSweep' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\HostedSweepCreator.cs	187	Active
Error	CS0246	The type or namespace name 'ElementType' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\HostedSweepCreator.cs	187	Active
Error	CS0246	The type or namespace name 'ReferenceArray' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\HostedSweepCreator.cs	187	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\HostedSweepCreator.cs	194	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\SlabEdgeCreator.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\SlabEdgeCreator.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\SlabEdgeCreator.cs	42	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\SlabEdgeCreator.cs	50	Active
Error	CS0246	The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\SlabEdgeCreator.cs	50	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\SlabEdgeCreator.cs	56	Active
Error	CS0246	The type or namespace name 'HostedSweep' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\SlabEdgeCreator.cs	118	Active
Error	CS0246	The type or namespace name 'ElementType' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\SlabEdgeCreator.cs	118	Active
Error	CS0246	The type or namespace name 'ReferenceArray' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\SlabEdgeCreator.cs	118	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\SlabEdgeCreator.cs	130	Active
Error	CS0246	The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\SlabEdgeCreator.cs	130	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Data\CreationData.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Data\CreationData.cs	27	Active
Error	CS0246	The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Data\CreationData.cs	42	Active
Error	CS0246	The type or namespace name 'ElementType' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Data\CreationData.cs	49	Active
Error	CS0246	The type or namespace name 'ElementType' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Data\CreationData.cs	74	Active
Error	CS0246	The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Data\CreationData.cs	79	Active
Error	CS0246	The type or namespace name 'ElementType' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Data\CreationData.cs	84	Active
Error	CS0246	The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Data\CreationData.cs	89	Active
Error	CS0246	The type or namespace name 'ElementType' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Data\CreationData.cs	163	Active
Error	CS0246	The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Data\CreationData.cs	172	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Data\ModificationData.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Data\ModificationData.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Data\ModificationData.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Data\ModificationData.cs	29	Active
Error	CS0246	The type or namespace name 'HostedSweep' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Data\ModificationData.cs	43	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Data\ModificationData.cs	53	Active
Error	CS0246	The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Data\ModificationData.cs	58	Active
Error	CS0246	The type or namespace name 'Transaction' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Data\ModificationData.cs	63	Active
Error	CS0246	The type or namespace name 'HostedSweep' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Data\ModificationData.cs	71	Active
Error	CS0246	The type or namespace name 'ElementType' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Data\ModificationData.cs	103	Active
Error	CS0246	The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Data\ModificationData.cs	122	Active
Error	CS0246	The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Data\ModificationData.cs	140	Active
Error	CS0246	The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Data\ModificationData.cs	383	Active
Error	CS0246	The type or namespace name 'TransactionStatus' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Data\ModificationData.cs	389	Active
Error	CS0246	The type or namespace name 'TransactionStatus' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Data\ModificationData.cs	394	Active
Error	CS0246	The type or namespace name 'TransactionStatus' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Data\ModificationData.cs	399	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Forms\EdgeFetchForm.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Forms\EdgeFetchForm.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Forms\EdgeFetchForm.cs	66	Active
Error	CS0246	The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Forms\EdgeFetchForm.cs	360	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Forms\EdgeFormUITypeEditor.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Forms\HostedSweepModifyForm.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Forms\HostedSweepModifyForm.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Geom\ElementGeometry.cs	26	Active
Error	CS0246	The type or namespace name 'Solid' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Geom\ElementGeometry.cs	43	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Geom\ElementGeometry.cs	48	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Geom\ElementGeometry.cs	53	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Geom\ElementGeometry.cs	59	Active
Error	CS0246	The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Geom\ElementGeometry.cs	69	Active
Error	CS0246	The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Geom\ElementGeometry.cs	81	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Geom\ElementGeometry.cs	87	Active
Error	CS0246	The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Geom\ElementGeometry.cs	113	Active
Error	CS0246	The type or namespace name 'Solid' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Geom\ElementGeometry.cs	126	Active
Error	CS0246	The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Geom\ElementGeometry.cs	135	Active
Error	CS0246	The type or namespace name 'Solid' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Geom\ElementGeometry.cs	146	Active
Error	CS0246	The type or namespace name 'BoundingBoxXYZ' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Geom\ElementGeometry.cs	146	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Geom\ElementGeometry.cs	234	Active
Error	CS0246	The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Geom\ElementGeometry.cs	283	Active
Error	CS0246	The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Geom\ElementGeometry.cs	306	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Geom\ElementGeometry.cs	306	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Geom\TrackBall.cs	27	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Geom\TrackBall.cs	57	Active
Error	CS0246	The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Geom\TrackBall.cs	62	Active
Error	CS0246	The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Geom\TrackBall.cs	72	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	NewHostedSweep	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Geom\TrackBall.cs	94	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewOpenings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\Command.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewOpenings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\Command.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewOpenings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\Command.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewOpenings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\Command.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewOpenings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\Command.cs	41	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	NewOpenings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\Command.cs	41	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewOpenings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\Command.cs	42	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	NewOpenings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\Command.cs	42	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewOpenings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\Command.cs	43	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	NewOpenings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\Command.cs	43	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	NewOpenings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\Command.cs	44	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewOpenings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\Command.cs	63	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	NewOpenings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\Command.cs	63	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewOpenings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\Command.cs	64	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewOpenings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\MathTools.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewOpenings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\MathTools.cs	139	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewOpenings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\NewOpeningsForm.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewOpenings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\Profile.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewOpenings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\Profile.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewOpenings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\Profile.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewOpenings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\Profile.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewOpenings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\Profile.cs	46	Active
Error	CS0246	The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)	NewOpenings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\Profile.cs	51	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewOpenings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\Profile.cs	56	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewOpenings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\Profile.cs	61	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewOpenings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\Profile.cs	66	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewOpenings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\Profile.cs	106	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	NewOpenings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\Profile.cs	106	Active
Error	CS0246	The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)	NewOpenings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\Profile.cs	121	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewOpenings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\Profile.cs	121	Active
Error	CS0246	The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)	NewOpenings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\Profile.cs	163	Active
Error	CS0246	The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)	NewOpenings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\Profile.cs	193	Active
Error	CS0246	The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)	NewOpenings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\Profile.cs	193	Active
Error	CS0246	The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)	NewOpenings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\Profile.cs	278	Active
Error	CS0246	The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)	NewOpenings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\Profile.cs	278	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewOpenings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\ProfileFloor.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewOpenings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\ProfileFloor.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewOpenings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\ProfileFloor.cs	29	Active
Error	CS0246	The type or namespace name 'Floor' could not be found (are you missing a using directive or an assembly reference?)	NewOpenings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\ProfileFloor.cs	41	Active
Error	CS0246	The type or namespace name 'Floor' could not be found (are you missing a using directive or an assembly reference?)	NewOpenings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\ProfileFloor.cs	48	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	NewOpenings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\ProfileFloor.cs	48	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewOpenings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\ProfileWall.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewOpenings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\ProfileWall.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewOpenings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\ProfileWall.cs	29	Active
Error	CS0246	The type or namespace name 'Wall' could not be found (are you missing a using directive or an assembly reference?)	NewOpenings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\ProfileWall.cs	40	Active
Error	CS0246	The type or namespace name 'Wall' could not be found (are you missing a using directive or an assembly reference?)	NewOpenings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\ProfileWall.cs	47	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	NewOpenings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\ProfileWall.cs	47	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewPathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\Command.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewPathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\Command.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewPathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\Command.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewPathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\Command.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewPathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\Command.cs	39	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	NewPathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\Command.cs	39	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewPathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\Command.cs	40	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	NewPathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\Command.cs	40	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewPathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\Command.cs	41	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	NewPathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\Command.cs	41	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	NewPathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\Command.cs	42	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewPathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\Command.cs	61	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	NewPathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\Command.cs	61	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewPathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\Command.cs	62	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewPathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\MathTools.cs	25	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewPathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\MathTools.cs	114	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewPathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\NewPathReinforcementForm.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewPathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\NewPathReinforcementForm.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewPathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\NewPathReinforcementForm.cs	33	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	NewPathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\NewPathReinforcementForm.cs	52	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	NewPathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\NewPathReinforcementForm.cs	325	Active
Error	CS0246	The type or namespace name 'PathReinforcement' could not be found (are you missing a using directive or an assembly reference?)	NewPathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\NewPathReinforcementForm.cs	325	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	NewPathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\NewPathReinforcementForm.cs	358	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewPathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\Profile.cs	25	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewPathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\Profile.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewPathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\Profile.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewPathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\Profile.cs	28	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	NewPathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\Profile.cs	44	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewPathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\Profile.cs	49	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewPathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\Profile.cs	54	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewPathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\Profile.cs	59	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewPathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\Profile.cs	70	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	NewPathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\Profile.cs	93	Active
Error	CS0246	The type or namespace name 'PathReinforcement' could not be found (are you missing a using directive or an assembly reference?)	NewPathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\Profile.cs	106	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	NewPathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\Profile.cs	113	Active
Error	CS0246	The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)	NewPathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\Profile.cs	113	Active
Error	CS0246	The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)	NewPathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\Profile.cs	153	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewPathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\Profile.cs	153	Active
Error	CS0246	The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)	NewPathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\Profile.cs	195	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewPathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\ProfileFloor.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewPathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\ProfileFloor.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewPathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\ProfileFloor.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewPathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\ProfileFloor.cs	29	Active
Error	CS0246	The type or namespace name 'Floor' could not be found (are you missing a using directive or an assembly reference?)	NewPathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\ProfileFloor.cs	41	Active
Error	CS0246	The type or namespace name 'Floor' could not be found (are you missing a using directive or an assembly reference?)	NewPathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\ProfileFloor.cs	48	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	NewPathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\ProfileFloor.cs	48	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	NewPathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\ProfileFloor.cs	62	Active
Error	CS0246	The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)	NewPathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\ProfileFloor.cs	62	Active
Error	CS0246	The type or namespace name 'PathReinforcement' could not be found (are you missing a using directive or an assembly reference?)	NewPathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\ProfileFloor.cs	106	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewPathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\ProfileWall.cs	25	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewPathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\ProfileWall.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewPathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\ProfileWall.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewPathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\ProfileWall.cs	28	Active
Error	CS0246	The type or namespace name 'Wall' could not be found (are you missing a using directive or an assembly reference?)	NewPathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\ProfileWall.cs	40	Active
Error	CS0246	The type or namespace name 'Wall' could not be found (are you missing a using directive or an assembly reference?)	NewPathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\ProfileWall.cs	47	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	NewPathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\ProfileWall.cs	47	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	NewPathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\ProfileWall.cs	61	Active
Error	CS0246	The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)	NewPathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\ProfileWall.cs	61	Active
Error	CS0246	The type or namespace name 'PathReinforcement' could not be found (are you missing a using directive or an assembly reference?)	NewPathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\ProfileWall.cs	153	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Command.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Command.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Command.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Command.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Command.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Command.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Command.cs	34	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Command.cs	42	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Command.cs	42	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Command.cs	43	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Command.cs	43	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Command.cs	44	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Command.cs	44	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Command.cs	45	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Command.cs	63	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Command.cs	63	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Command.cs	63	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Constraints\ConstraintOnArcShape.cs	28	Active
Error	CS0246	The type or namespace name 'RebarShapeDefinitionByArc' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Constraints\ConstraintOnArcShape.cs	68	Active
Error	CS0246	The type or namespace name 'RebarShapeArcReferenceType' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Constraints\ConstraintOnArcShape.cs	126	Active
Error	CS0246	The type or namespace name 'RebarShapeArcReferenceType' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Constraints\ConstraintOnArcShape.cs	137	Active
Error	CS0246	The type or namespace name 'RebarShapeArcReferenceType' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Constraints\ConstraintOnArcShape.cs	161	Active
Error	CS0246	The type or namespace name 'RebarShapeArcReferenceType' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Constraints\ConstraintOnArcShape.cs	172	Active
Error	CS0246	The type or namespace name 'RebarShapeArcReferenceType' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Constraints\ConstraintOnArcShape.cs	197	Active
Error	CS0246	The type or namespace name 'RebarShapeArcReferenceType' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Constraints\ConstraintOnArcShape.cs	208	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Constraints\ConstraintOnRebarShape.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Constraints\ConstraintOnSegmentShape.cs	28	Active
Error	CS0246	The type or namespace name 'RebarShapeDefinitionBySegments' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Constraints\ConstraintOnSegmentShape.cs	69	Active
Error	CS0246	The type or namespace name 'RebarShapeVertexTurn' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Constraints\ConstraintOnSegmentShape.cs	91	Active
Error	CS0246	The type or namespace name 'RebarShapeBendAngle' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Constraints\ConstraintOnSegmentShape.cs	96	Active
Error	CS0246	The type or namespace name 'RebarShapeVertexTurn' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Constraints\ConstraintOnSegmentShape.cs	130	Active
Error	CS0246	The type or namespace name 'RebarShapeBendAngle' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Constraints\ConstraintOnSegmentShape.cs	145	Active
Error	CS0246	The type or namespace name 'RebarShapeVertexTurn' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Constraints\ConstraintOnSegmentShape.cs	180	Active
Error	CS0246	The type or namespace name 'RebarShapeBendAngle' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Constraints\ConstraintOnSegmentShape.cs	185	Active
Error	CS0246	The type or namespace name 'RebarShapeVertexTurn' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Constraints\ConstraintOnSegmentShape.cs	227	Active
Error	CS0246	The type or namespace name 'RebarShapeBendAngle' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Constraints\ConstraintOnSegmentShape.cs	236	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Forms\AddParameterForm.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Forms\NewRebarForm.cs	35	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Forms\NewRebarForm.cs	36	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Forms\NewRebarForm.cs	37	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Forms\NewRebarForm.cs	38	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Forms\NewRebarForm.cs	55	Active
Error	CS0246	The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Forms\NewRebarForm.cs	60	Active
Error	CS0246	The type or namespace name 'RebarShape' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Forms\NewRebarForm.cs	65	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Forms\NewRebarForm.cs	89	Active
Error	CS0246	The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Forms\NewRebarForm.cs	106	Active
Error	CS0246	The type or namespace name 'RebarShape' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Forms\NewRebarForm.cs	117	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Forms\NewRebarShapeForm.cs	34	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Forms\NewRebarShapeForm.cs	35	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Forms\NewRebarShapeForm.cs	36	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Forms\NewRebarShapeForm.cs	53	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Forms\NewRebarShapeForm.cs	58	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Forms\NewRebarShapeForm.cs	83	Active
Error	CS0246	The type or namespace name 'RebarHookOrientation' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Forms\NewRebarShapeForm.cs	127	Active
Error	CS0246	The type or namespace name 'RebarHookOrientation' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Forms\NewRebarShapeForm.cs	139	Active
Error	CS0246	The type or namespace name 'DefinitionGroup' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Forms\NewRebarShapeForm.cs	152	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeometrySupport.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeometrySupport.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeometrySupport.cs	35	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeometrySupport.cs	36	Active
Error	CS0246	The type or namespace name 'Solid' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeometrySupport.cs	46	Active
Error	CS0246	The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeometrySupport.cs	51	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeometrySupport.cs	56	Active
Error	CS0246	The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeometrySupport.cs	61	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeometrySupport.cs	66	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeometrySupport.cs	71	Active
Error	CS0246	The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeometrySupport.cs	80	Active
Error	CS0246	The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeometrySupport.cs	102	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeometrySupport.cs	190	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeometrySupport.cs	190	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeometrySupport.cs	212	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeometrySupport.cs	212	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeometrySupport.cs	248	Active
Error	CS0246	The type or namespace name 'Solid' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeometrySupport.cs	279	Active
Error	CS0246	The type or namespace name 'Face' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeometrySupport.cs	307	Active
Error	CS0246	The type or namespace name 'Solid' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeometrySupport.cs	307	Active
Error	CS0246	The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeometrySupport.cs	371	Active
Error	CS0246	The type or namespace name 'EdgeArray' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeometrySupport.cs	371	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeomUtil.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeomUtil.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeomUtil.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeomUtil.cs	34	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeomUtil.cs	35	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeomUtil.cs	65	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeomUtil.cs	65	Active
Error	CS0246	The type or namespace name 'Face' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeomUtil.cs	82	Active
Error	CS0246	The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeomUtil.cs	82	Active
Error	CS0246	The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeomUtil.cs	83	Active
Error	CS0246	The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeomUtil.cs	83	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeomUtil.cs	136	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeomUtil.cs	136	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeomUtil.cs	153	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeomUtil.cs	153	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeomUtil.cs	169	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeomUtil.cs	169	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeomUtil.cs	186	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeomUtil.cs	200	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeomUtil.cs	200	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeomUtil.cs	200	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeomUtil.cs	215	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeomUtil.cs	215	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeomUtil.cs	215	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeomUtil.cs	230	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeomUtil.cs	230	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeomUtil.cs	245	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeomUtil.cs	245	Active
Error	CS0246	The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeomUtil.cs	245	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeomUtil.cs	273	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeomUtil.cs	273	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeomUtil.cs	273	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeomUtil.cs	288	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeomUtil.cs	288	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Parameters\RebarShapeParameter.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Parameters\RebarShapeParameter.cs	27	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Parameters\RebarShapeParameter.cs	42	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Parameters\RebarShapeParameter.cs	70	Active
Error	CS0246	The type or namespace name 'ExternalDefinition' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Parameters\RebarShapeParameter.cs	88	Active
Error	CS0246	The type or namespace name 'DefinitionGroup' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Parameters\RebarShapeParameter.cs	88	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Parameters\RebarShapeParameter.cs	107	Active
Error	CS0246	The type or namespace name 'DefinitionGroup' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Parameters\RebarShapeParameter.cs	107	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Parameters\RebarShapeParameterDouble.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Parameters\RebarShapeParameterDouble.cs	67	Active
Error	CS0246	The type or namespace name 'DefinitionGroup' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Parameters\RebarShapeParameterDouble.cs	67	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Parameters\RebarShapeParameterFormula.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Parameters\RebarShapeParameterFormula.cs	67	Active
Error	CS0246	The type or namespace name 'DefinitionGroup' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Parameters\RebarShapeParameterFormula.cs	67	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\RebarCreator.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\RebarCreator.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\RebarCreator.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\RebarCreator.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\RebarCreator.cs	46	Active
Error	CS0246	The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\RebarCreator.cs	51	Active
Error	CS0246	The type or namespace name 'Rebar' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\RebarCreator.cs	61	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\RebarCreator.cs	68	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\RebarShapeDef\RebarShapeDef.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\RebarShapeDef\RebarShapeDef.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\RebarShapeDef\RebarShapeDef.cs	28	Active
Error	CS0246	The type or namespace name 'RebarShapeDefinition' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\RebarShapeDef\RebarShapeDef.cs	41	Active
Error	CS0246	The type or namespace name 'RebarShapeDefinition' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\RebarShapeDef\RebarShapeDef.cs	56	Active
Error	CS0246	The type or namespace name 'RebarShapeDefinition' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\RebarShapeDef\RebarShapeDef.cs	81	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\RebarShapeDef\RebarShapeDef.cs	124	Active
Error	CS0246	The type or namespace name 'DefinitionGroup' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\RebarShapeDef\RebarShapeDef.cs	124	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\RebarShapeDef\RebarShapeDefByArc.cs	27	Active
Error	CS0246	The type or namespace name 'RebarShapeDefinitionByArc' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\RebarShapeDef\RebarShapeDefByArc.cs	36	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\RebarShapeDef\RebarShapeDefBySegment.cs	27	Active
Error	CS0246	The type or namespace name 'RebarShapeDefinitionBySegments' could not be found (are you missing a using directive or an assembly reference?)	NewRebar	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\RebarShapeDef\RebarShapeDefBySegment.cs	36	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\Command.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\Command.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\Command.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\Command.cs	39	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\Command.cs	39	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\Command.cs	40	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\Command.cs	40	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\Command.cs	41	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\Command.cs	41	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\Command.cs	42	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\Command.cs	45	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\Command.cs	50	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\Command.cs	74	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\Command.cs	74	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\Command.cs	76	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofForms\CustomTypeConverter.cs	28	Active
Error	CS0246	The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofForms\CustomTypeConverter.cs	41	Active
Error	CS0246	The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofForms\CustomTypeConverter.cs	47	Active
Error	CS0246	The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofForms\CustomTypeConverter.cs	61	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofForms\ExtrusionRoofWrapper.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofForms\ExtrusionRoofWrapper.cs	30	Active
Error	CS0246	The type or namespace name 'ExtrusionRoof' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofForms\ExtrusionRoofWrapper.cs	42	Active
Error	CS0246	The type or namespace name 'ExtrusionRoof' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofForms\ExtrusionRoofWrapper.cs	48	Active
Error	CS0246	The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofForms\ExtrusionRoofWrapper.cs	120	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofForms\FootPrintRoofWrapper.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofForms\FootPrintRoofWrapper.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofForms\FootPrintRoofWrapper.cs	46	Active
Error	CS0246	The type or namespace name 'BoundingBoxXYZ' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofForms\FootPrintRoofWrapper.cs	46	Active
Error	CS0246	The type or namespace name 'FootPrintRoof' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofForms\FootPrintRoofWrapper.cs	60	Active
Error	CS0246	The type or namespace name 'ModelCurve' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofForms\FootPrintRoofWrapper.cs	62	Active
Error	CS0246	The type or namespace name 'BoundingBoxXYZ' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofForms\FootPrintRoofWrapper.cs	64	Active
Error	CS0246	The type or namespace name 'FootPrintRoof' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofForms\FootPrintRoofWrapper.cs	70	Active
Error	CS0246	The type or namespace name 'ModelCurve' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofForms\FootPrintRoofWrapper.cs	70	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofForms\FootPrintRoofWrapper.cs	94	Active
Error	CS0246	The type or namespace name 'ModelCurve' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofForms\FootPrintRoofWrapper.cs	108	Active
Error	CS0246	The type or namespace name 'FootPrintRoof' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofForms\FootPrintRoofWrapper.cs	228	Active
Error	CS0246	The type or namespace name 'BoundingBoxXYZ' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofForms\FootPrintRoofWrapper.cs	235	Active
Error	CS0246	The type or namespace name 'FootPrintRoof' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofForms\FootPrintRoofWrapper.cs	243	Active
Error	CS0246	The type or namespace name 'BoundingBoxXYZ' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofForms\FootPrintRoofWrapper.cs	268	Active
Error	CS0246	The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofForms\FootPrintRoofWrapper.cs	298	Active
Error	CS0246	The type or namespace name 'EaveCutterType' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofForms\FootPrintRoofWrapper.cs	320	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofForms\GraphicsControl.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofForms\RoofEditorForm.cs	31	Active
Error	CS0246	The type or namespace name 'RoofBase' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofForms\RoofEditorForm.cs	41	Active
Error	CS0246	The type or namespace name 'RoofBase' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofForms\RoofEditorForm.cs	64	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofForms\RoofForm.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofForms\RoofForm.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofForms\RoofItem.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofForms\RoofItem.cs	38	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofForms\RoofItem.cs	44	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofForms\RoofItem.cs	96	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\ExtrusionRoofManager.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\ExtrusionRoofManager.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\ExtrusionRoofManager.cs	30	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\ExtrusionRoofManager.cs	40	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\ExtrusionRoofManager.cs	42	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\ExtrusionRoofManager.cs	44	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\ExtrusionRoofManager.cs	50	Active
Error	CS0246	The type or namespace name 'ExtrusionRoof' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\ExtrusionRoofManager.cs	67	Active
Error	CS0246	The type or namespace name 'CurveArray' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\ExtrusionRoofManager.cs	67	Active
Error	CS0246	The type or namespace name 'ReferencePlane' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\ExtrusionRoofManager.cs	67	Active
Error	CS0246	The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\ExtrusionRoofManager.cs	67	Active
Error	CS0246	The type or namespace name 'RoofType' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\ExtrusionRoofManager.cs	67	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\FootPrintRoofManager.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\FootPrintRoofManager.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\FootPrintRoofManager.cs	29	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\FootPrintRoofManager.cs	39	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\FootPrintRoofManager.cs	41	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\FootPrintRoofManager.cs	43	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\FootPrintRoofManager.cs	49	Active
Error	CS0246	The type or namespace name 'FootPrintRoof' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\FootPrintRoofManager.cs	63	Active
Error	CS0246	The type or namespace name 'CurveArray' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\FootPrintRoofManager.cs	63	Active
Error	CS0246	The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\FootPrintRoofManager.cs	63	Active
Error	CS0246	The type or namespace name 'RoofType' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\FootPrintRoofManager.cs	63	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\RoofsManager.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\RoofsManager.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\RoofsManager.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\RoofsManager.cs	33	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\RoofsManager.cs	54	Active
Error	CS0246	The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\RoofsManager.cs	56	Active
Error	CS0246	The type or namespace name 'RoofType' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\RoofsManager.cs	58	Active
Error	CS0246	The type or namespace name 'Selection' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\RoofsManager.cs	65	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\RoofsManager.cs	68	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\RoofsManager.cs	69	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\RoofsManager.cs	72	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\RoofsManager.cs	75	Active
Error	CS0246	The type or namespace name 'ReferencePlane' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\RoofsManager.cs	78	Active
Error	CS0246	The type or namespace name 'Transaction' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\RoofsManager.cs	81	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\RoofsManager.cs	90	Active
Error	CS0246	The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\RoofsManager.cs	167	Active
Error	CS0246	The type or namespace name 'RoofType' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\RoofsManager.cs	178	Active
Error	CS0246	The type or namespace name 'ReferencePlane' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\RoofsManager.cs	189	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\RoofsManager.cs	200	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\RoofsManager.cs	211	Active
Error	CS0246	The type or namespace name 'CurveArray' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\RoofsManager.cs	222	Active
Error	CS0246	The type or namespace name 'CurveArray' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\RoofsManager.cs	233	Active
Error	CS0246	The type or namespace name 'CurveArray' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\RoofsManager.cs	245	Active
Error	CS0246	The type or namespace name 'CurveArray' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\RoofsManager.cs	261	Active
Error	CS0246	The type or namespace name 'FootPrintRoof' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\RoofsManager.cs	324	Active
Error	CS0246	The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\RoofsManager.cs	324	Active
Error	CS0246	The type or namespace name 'RoofType' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\RoofsManager.cs	324	Active
Error	CS0246	The type or namespace name 'CurveArray' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\RoofsManager.cs	339	Active
Error	CS0246	The type or namespace name 'ExtrusionRoof' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\RoofsManager.cs	389	Active
Error	CS0246	The type or namespace name 'ReferencePlane' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\RoofsManager.cs	389	Active
Error	CS0246	The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\RoofsManager.cs	390	Active
Error	CS0246	The type or namespace name 'RoofType' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\RoofsManager.cs	390	Active
Error	CS0246	The type or namespace name 'TransactionStatus' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\RoofsManager.cs	405	Active
Error	CS0246	The type or namespace name 'TransactionStatus' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\RoofsManager.cs	418	Active
Error	CS0246	The type or namespace name 'TransactionStatus' could not be found (are you missing a using directive or an assembly reference?)	NewRoof	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\RoofsManager.cs	426	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\Command.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\Command.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\Command.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\Command.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\Command.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\Command.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\Command.cs	40	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\Command.cs	40	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\Command.cs	41	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\Command.cs	41	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\Command.cs	42	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\Command.cs	42	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\Command.cs	43	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\Command.cs	46	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\Command.cs	51	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\Command.cs	75	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\Command.cs	75	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\Command.cs	76	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\GeometryData.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\GeometryData.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\GeometryData.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\GeometryData.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\GeometryData.cs	33	Active
Error	CS0246	The type or namespace name 'BoundingBoxXYZ' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\GeometryData.cs	44	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\GeometryData.cs	46	Active
Error	CS0246	The type or namespace name 'ViewDetailLevel' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\GeometryData.cs	65	Active
Error	CS0246	The type or namespace name 'View' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\GeometryData.cs	65	Active
Error	CS0246	The type or namespace name 'View' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\GeometryData.cs	84	Active
Error	CS0246	The type or namespace name 'GeometryObject' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\GeometryData.cs	103	Active
Error	CS0246	The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\GeometryData.cs	103	Active
Error	CS0246	The type or namespace name 'GeometryObject' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\GeometryData.cs	122	Active
Error	CS0246	The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\GeometryData.cs	122	Active
Error	CS0246	The type or namespace name 'GeometryObject' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\GeometryData.cs	170	Active
Error	CS0246	The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\GeometryData.cs	170	Active
Error	CS0246	The type or namespace name 'GeometryObject' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\GeometryData.cs	196	Active
Error	CS0246	The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\GeometryData.cs	196	Active
Error	CS0246	The type or namespace name 'GeometryObject' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\GeometryData.cs	217	Active
Error	CS0246	The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\GeometryData.cs	217	Active
Error	CS0246	The type or namespace name 'GeometryObject' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\GeometryData.cs	236	Active
Error	CS0246	The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\GeometryData.cs	236	Active
Error	CS0246	The type or namespace name 'GeometryObject' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\GeometryData.cs	272	Active
Error	CS0246	The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\GeometryData.cs	272	Active
Error	CS0246	The type or namespace name 'GeometryObject' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\GeometryData.cs	298	Active
Error	CS0246	The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\GeometryData.cs	298	Active
Error	CS0246	The type or namespace name 'GeometryObject' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\GeometryData.cs	325	Active
Error	CS0246	The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\GeometryData.cs	325	Active
Error	CS0246	The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\GeometryData.cs	349	Active
Error	CS0246	The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\GeometryData.cs	349	Active
Error	CS0246	The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\GeometryData.cs	349	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\Graphics2DData.cs	30	Active
Error	CS0246	The type or namespace name 'UV' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\Graphics2DData.cs	103	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\Graphics3DData.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\Graphics3DData.cs	31	Active
Error	CS0246	The type or namespace name 'BoundingBoxXYZ' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\Graphics3DData.cs	96	Active
Error	CS0246	The type or namespace name 'BoundingBoxXYZ' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\Graphics3DData.cs	205	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\Graphics3DData.cs	218	Active
Error	CS0246	The type or namespace name 'BoundingBoxXYZ' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\Graphics3DData.cs	218	Active
Error	CS0246	The type or namespace name 'BoundingBoxXYZ' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\Graphics3DData.cs	337	Active
Error	CS0246	The type or namespace name 'BoundingBoxXYZ' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\Graphics3DData.cs	349	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\MathUtil.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\MathUtil.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\MathUtil.cs	45	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\MathUtil.cs	45	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\MathUtil.cs	45	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\MathUtil.cs	96	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\MathUtil.cs	96	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\MathUtil.cs	96	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\MathUtil.cs	112	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\MathUtil.cs	112	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\MathUtil.cs	112	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\MathUtil.cs	128	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\MathUtil.cs	128	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\MathUtil.cs	139	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\MathUtil.cs	139	Active
Error	CS0246	The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\MathUtil.cs	139	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\MathUtil.cs	168	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\MathUtil.cs	178	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\ModelData.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\ModelData.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\ModelData.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\ModelData.cs	34	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\ModelData.cs	35	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\ModelData.cs	36	Active
Error	CS0246	The type or namespace name 'BoundingBoxXYZ' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\ModelData.cs	46	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\ModelData.cs	47	Active
Error	CS0246	The type or namespace name 'UV' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\ModelData.cs	48	Active
Error	CS0246	The type or namespace name 'AnalyticalModel' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\ModelData.cs	104	Active
Error	CS0246	The type or namespace name 'AnalyticalModel' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\ModelData.cs	114	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\ObjectViewer.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\ObjectViewer.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\ObjectViewer.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\ObjectViewer.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\ObjectViewer.cs	34	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\ObjectViewer.cs	35	Active
Error	CS0246	The type or namespace name 'View' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\ObjectViewer.cs	59	Active
Error	CS0246	The type or namespace name 'ViewDetailLevel' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\ObjectViewer.cs	61	Active
Error	CS0246	The type or namespace name 'View' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\ObjectViewer.cs	62	Active
Error	CS0246	The type or namespace name 'View' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\ObjectViewer.cs	91	Active
Error	CS0246	The type or namespace name 'View' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\ObjectViewer.cs	108	Active
Error	CS0246	The type or namespace name 'ViewDetailLevel' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\ObjectViewer.cs	119	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\ObjectViewerForm.cs	34	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\Para.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\Para.cs	30	Active
Error	CS0246	The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\Para.cs	39	Active
Error	CS0246	The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\Para.cs	93	Active
Error	CS0246	The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\Para.cs	122	Active
Error	CS0246	The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\Para.cs	159	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\ParasFactory.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\ParasFactory.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\ParasFactory.cs	32	Active
Error	CS0246	The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\ParasFactory.cs	41	Active
Error	CS0246	The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\ParasFactory.cs	49	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\Sketch.cs	31	Active
Error	CS0246	The type or namespace name 'BoundingBoxXYZ' could not be found (are you missing a using directive or an assembly reference?)	ObjectViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\Sketch.cs	391	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Openings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Openings\CS\BoundingBox.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Openings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Openings\CS\BoundingBox.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Openings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Openings\CS\BoundingBox.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Openings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Openings\CS\BoundingBox.cs	30	Active
Error	CS0246	The type or namespace name 'BoundingBoxXYZ' could not be found (are you missing a using directive or an assembly reference?)	Openings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Openings\CS\BoundingBox.cs	39	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Openings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Openings\CS\BoundingBox.cs	49	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Openings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Openings\CS\BoundingBox.cs	54	Active
Error	CS0246	The type or namespace name 'BoundingBoxXYZ' could not be found (are you missing a using directive or an assembly reference?)	Openings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Openings\CS\BoundingBox.cs	96	Active
Error	CS0246	The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)	Openings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Openings\CS\BoundingBox.cs	109	Active
Error	CS0246	The type or namespace name 'SketchPlane' could not be found (are you missing a using directive or an assembly reference?)	Openings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Openings\CS\BoundingBox.cs	185	Active
Error	CS0246	The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)	Openings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Openings\CS\BoundingBox.cs	185	Active
Error	CS0246	The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)	Openings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Openings\CS\BoundingBox.cs	185	Active
Error	CS0246	The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)	Openings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Openings\CS\BoundingBox.cs	214	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Openings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Openings\CS\Command.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Openings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Openings\CS\Command.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Openings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Openings\CS\Command.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Openings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Openings\CS\Command.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Openings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Openings\CS\Command.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Openings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Openings\CS\Command.cs	39	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	Openings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Openings\CS\Command.cs	39	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Openings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Openings\CS\Command.cs	40	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	Openings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Openings\CS\Command.cs	40	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Openings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Openings\CS\Command.cs	41	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	Openings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Openings\CS\Command.cs	41	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	Openings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Openings\CS\Command.cs	42	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Openings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Openings\CS\Command.cs	62	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	Openings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Openings\CS\Command.cs	62	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Openings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Openings\CS\Command.cs	63	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Openings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Openings\CS\LineSketch.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Openings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Openings\CS\OpeningInfo.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Openings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Openings\CS\OpeningInfo.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Openings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Openings\CS\OpeningInfo.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Openings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Openings\CS\OpeningInfo.cs	31	Active
Error	CS0246	The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)	Openings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Openings\CS\OpeningInfo.cs	42	Active
Error	CS0246	The type or namespace name 'Opening' could not be found (are you missing a using directive or an assembly reference?)	Openings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Openings\CS\OpeningInfo.cs	44	Active
Error	CS0246	The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)	Openings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Openings\CS\OpeningInfo.cs	55	Active
Error	CS0246	The type or namespace name 'Opening' could not be found (are you missing a using directive or an assembly reference?)	Openings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Openings\CS\OpeningInfo.cs	71	Active
Error	CS0246	The type or namespace name 'Opening' could not be found (are you missing a using directive or an assembly reference?)	Openings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Openings\CS\OpeningInfo.cs	155	Active
Error	CS0246	The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)	Openings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Openings\CS\OpeningInfo.cs	155	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	Openings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Openings\CS\OpeningInfo.cs	212	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	Openings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Openings\CS\OpeningInfo.cs	212	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	Openings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Openings\CS\OpeningInfo.cs	244	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Openings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Openings\CS\OpeningProperty.cs	28	Active
Error	CS0246	The type or namespace name 'Opening' could not be found (are you missing a using directive or an assembly reference?)	Openings	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Openings\CS\OpeningProperty.cs	47	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PanelEdgeLengthAngle	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PanelEdgeLengthAngle\CS\Command.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PanelEdgeLengthAngle	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PanelEdgeLengthAngle\CS\Command.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PanelEdgeLengthAngle	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PanelEdgeLengthAngle\CS\Command.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PanelEdgeLengthAngle	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PanelEdgeLengthAngle\CS\Command.cs	37	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	PanelEdgeLengthAngle	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PanelEdgeLengthAngle\CS\Command.cs	37	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PanelEdgeLengthAngle	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PanelEdgeLengthAngle\CS\Command.cs	38	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	PanelEdgeLengthAngle	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PanelEdgeLengthAngle\CS\Command.cs	38	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PanelEdgeLengthAngle	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PanelEdgeLengthAngle\CS\Command.cs	39	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	PanelEdgeLengthAngle	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PanelEdgeLengthAngle\CS\Command.cs	39	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	PanelEdgeLengthAngle	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PanelEdgeLengthAngle\CS\Command.cs	40	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PanelEdgeLengthAngle	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PanelEdgeLengthAngle\CS\Command.cs	45	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PanelEdgeLengthAngle	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PanelEdgeLengthAngle\CS\Command.cs	49	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PanelEdgeLengthAngle	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PanelEdgeLengthAngle\CS\Command.cs	67	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	PanelEdgeLengthAngle	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PanelEdgeLengthAngle\CS\Command.cs	67	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PanelEdgeLengthAngle	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PanelEdgeLengthAngle\CS\Command.cs	67	Active
Error	CS0246	The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)	PanelEdgeLengthAngle	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PanelEdgeLengthAngle\CS\Command.cs	95	Active
Error	CS0246	The type or namespace name 'DividedSurface' could not be found (are you missing a using directive or an assembly reference?)	PanelEdgeLengthAngle	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PanelEdgeLengthAngle\CS\Command.cs	95	Active
Error	CS0246	The type or namespace name 'EdgeArray' could not be found (are you missing a using directive or an assembly reference?)	PanelEdgeLengthAngle	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PanelEdgeLengthAngle\CS\Command.cs	119	Active
Error	CS0246	The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)	PanelEdgeLengthAngle	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PanelEdgeLengthAngle\CS\Command.cs	119	Active
Error	CS0246	The type or namespace name 'EdgeArray' could not be found (are you missing a using directive or an assembly reference?)	PanelEdgeLengthAngle	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PanelEdgeLengthAngle\CS\Command.cs	171	Active
Error	CS0246	The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)	PanelEdgeLengthAngle	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PanelEdgeLengthAngle\CS\Command.cs	213	Active
Error	CS0246	The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)	PanelEdgeLengthAngle	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PanelEdgeLengthAngle\CS\Command.cs	213	Active
Error	CS0246	The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)	PanelEdgeLengthAngle	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PanelEdgeLengthAngle\CS\Command.cs	259	Active
Error	CS0246	The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)	PanelEdgeLengthAngle	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PanelEdgeLengthAngle\CS\Command.cs	290	Active
Error	CS0246	The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)	PanelEdgeLengthAngle	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PanelEdgeLengthAngle\CS\Command.cs	309	Active
Error	CS0246	The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)	PanelEdgeLengthAngle	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PanelEdgeLengthAngle\CS\Command.cs	316	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PanelSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\CSVTranslator.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PanelSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\CSVTranslator.cs	28	Active
Error	CS0246	The type or namespace name 'PanelScheduleView' could not be found (are you missing a using directive or an assembly reference?)	PanelSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\CSVTranslator.cs	41	Active
Error	CS0246	The type or namespace name 'PanelScheduleView' could not be found (are you missing a using directive or an assembly reference?)	PanelSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\CSVTranslator.cs	89	Active
Error	CS0246	The type or namespace name 'SectionType' could not be found (are you missing a using directive or an assembly reference?)	PanelSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\CSVTranslator.cs	89	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PanelSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\HTMLTranslator.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PanelSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\HTMLTranslator.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PanelSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\HTMLTranslator.cs	28	Active
Error	CS0246	The type or namespace name 'PanelScheduleView' could not be found (are you missing a using directive or an assembly reference?)	PanelSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\HTMLTranslator.cs	41	Active
Error	CS0246	The type or namespace name 'PanelScheduleView' could not be found (are you missing a using directive or an assembly reference?)	PanelSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\HTMLTranslator.cs	99	Active
Error	CS0246	The type or namespace name 'SectionType' could not be found (are you missing a using directive or an assembly reference?)	PanelSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\HTMLTranslator.cs	99	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PanelSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\InstanceViewCreation.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PanelSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\InstanceViewCreation.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PanelSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\InstanceViewCreation.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PanelSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\InstanceViewCreation.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PanelSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\InstanceViewCreation.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PanelSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\InstanceViewCreation.cs	37	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	PanelSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\InstanceViewCreation.cs	37	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PanelSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\InstanceViewCreation.cs	38	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	PanelSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\InstanceViewCreation.cs	38	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PanelSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\InstanceViewCreation.cs	39	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	PanelSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\InstanceViewCreation.cs	39	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	PanelSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\InstanceViewCreation.cs	40	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PanelSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\InstanceViewCreation.cs	58	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	PanelSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\InstanceViewCreation.cs	58	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PanelSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\InstanceViewCreation.cs	59	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PanelSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\PanelScheduleExport.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PanelSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\PanelScheduleExport.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PanelSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\PanelScheduleExport.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PanelSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\PanelScheduleExport.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PanelSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\PanelScheduleExport.cs	36	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	PanelSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\PanelScheduleExport.cs	36	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PanelSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\PanelScheduleExport.cs	37	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	PanelSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\PanelScheduleExport.cs	37	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PanelSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\PanelScheduleExport.cs	38	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	PanelSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\PanelScheduleExport.cs	38	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	PanelSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\PanelScheduleExport.cs	39	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PanelSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\PanelScheduleExport.cs	57	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	PanelSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\PanelScheduleExport.cs	57	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PanelSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\PanelScheduleExport.cs	58	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PanelSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\SheetImport.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PanelSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\SheetImport.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PanelSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\SheetImport.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PanelSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\SheetImport.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PanelSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\SheetImport.cs	36	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	PanelSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\SheetImport.cs	36	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PanelSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\SheetImport.cs	37	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	PanelSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\SheetImport.cs	37	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PanelSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\SheetImport.cs	38	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	PanelSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\SheetImport.cs	38	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	PanelSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\SheetImport.cs	39	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PanelSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\SheetImport.cs	57	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	PanelSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\SheetImport.cs	57	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PanelSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\SheetImport.cs	58	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PanelSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\Translator.cs	25	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PanelSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\Translator.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PanelSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\Translator.cs	27	Active
Error	CS0246	The type or namespace name 'PanelScheduleView' could not be found (are you missing a using directive or an assembly reference?)	PanelSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\Translator.cs	39	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PanelSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\Translator.cs	69	Active
Error	CS0246	The type or namespace name 'PanelScheduleView' could not be found (are you missing a using directive or an assembly reference?)	PanelSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\Translator.cs	69	Active
Error	CS0246	The type or namespace name 'SectionType' could not be found (are you missing a using directive or an assembly reference?)	PanelSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\Translator.cs	69	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ParameterUtils	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ParameterUtils\CS\Command.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ParameterUtils	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ParameterUtils\CS\Command.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ParameterUtils	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ParameterUtils\CS\Command.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ParameterUtils	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ParameterUtils\CS\Command.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ParameterUtils	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ParameterUtils\CS\Command.cs	38	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	ParameterUtils	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ParameterUtils\CS\Command.cs	38	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ParameterUtils	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ParameterUtils\CS\Command.cs	39	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	ParameterUtils	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ParameterUtils\CS\Command.cs	39	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ParameterUtils	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ParameterUtils\CS\Command.cs	40	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	ParameterUtils	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ParameterUtils\CS\Command.cs	40	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	ParameterUtils	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ParameterUtils\CS\Command.cs	41	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ParameterUtils	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ParameterUtils\CS\Command.cs	60	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	ParameterUtils	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ParameterUtils\CS\Command.cs	60	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	ParameterUtils	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ParameterUtils\CS\Command.cs	61	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ParameterValuesFromImage	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\ParameterValuesFromImage\CS\Command.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ParameterValuesFromImage	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\ParameterValuesFromImage\CS\Command.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ParameterValuesFromImage	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\ParameterValuesFromImage\CS\Command.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ParameterValuesFromImage	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\ParameterValuesFromImage\CS\Command.cs	38	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	ParameterValuesFromImage	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\ParameterValuesFromImage\CS\Command.cs	38	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ParameterValuesFromImage	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\ParameterValuesFromImage\CS\Command.cs	39	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	ParameterValuesFromImage	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\ParameterValuesFromImage\CS\Command.cs	39	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	ParameterValuesFromImage	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\ParameterValuesFromImage\CS\Command.cs	40	Active
Error	CS0246	The type or namespace name 'AddInId' could not be found (are you missing a using directive or an assembly reference?)	ParameterValuesFromImage	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\ParameterValuesFromImage\CS\Command.cs	42	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	ParameterValuesFromImage	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\ParameterValuesFromImage\CS\Command.cs	60	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	ParameterValuesFromImage	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\ParameterValuesFromImage\CS\Command.cs	60	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	ParameterValuesFromImage	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\ParameterValuesFromImage\CS\Command.cs	60	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PathOfTravel	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PathOfTravel	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PathOfTravel	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PathOfTravel	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs	34	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PathOfTravel	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs	35	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PathOfTravel	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs	36	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PathOfTravel	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs	64	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	PathOfTravel	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs	64	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PathOfTravel	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs	65	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	PathOfTravel	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs	65	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PathOfTravel	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs	66	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	PathOfTravel	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs	66	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	PathOfTravel	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs	67	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	PathOfTravel	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs	86	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	PathOfTravel	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs	86	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	PathOfTravel	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs	87	Active
Error	CS0246	The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)	PathOfTravel	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs	136	Active
Error	CS0246	The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)	PathOfTravel	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs	169	Active
Error	CS0246	The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)	PathOfTravel	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs	211	Active
Error	CS0246	The type or namespace name 'ISelectionFilter' could not be found (are you missing a using directive or an assembly reference?)	PathOfTravel	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs	225	Active
Error	CS0246	The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)	PathOfTravel	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs	227	Active
Error	CS0246	The type or namespace name 'Reference' could not be found (are you missing a using directive or an assembly reference?)	PathOfTravel	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs	236	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	PathOfTravel	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs	236	Active
Error	CS0246	The type or namespace name 'ISelectionFilter' could not be found (are you missing a using directive or an assembly reference?)	PathOfTravel	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs	246	Active
Error	CS0246	The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)	PathOfTravel	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs	248	Active
Error	CS0246	The type or namespace name 'Reference' could not be found (are you missing a using directive or an assembly reference?)	PathOfTravel	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs	257	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	PathOfTravel	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs	257	Active
Error	CS0246	The type or namespace name 'Room' could not be found (are you missing a using directive or an assembly reference?)	PathOfTravel	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs	275	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	PathOfTravel	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs	275	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	PathOfTravel	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs	320	Active
Error	CS0246	The type or namespace name 'Room' could not be found (are you missing a using directive or an assembly reference?)	PathOfTravel	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs	320	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	PathOfTravel	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs	337	Active
Error	CS0246	The type or namespace name 'ViewPlan' could not be found (are you missing a using directive or an assembly reference?)	PathOfTravel	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs	337	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	PathOfTravel	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs	392	Active
Error	CS0246	The type or namespace name 'ViewPlan' could not be found (are you missing a using directive or an assembly reference?)	PathOfTravel	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs	392	Active
Error	CS0246	The type or namespace name 'Room' could not be found (are you missing a using directive or an assembly reference?)	PathOfTravel	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs	392	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	PathOfTravel	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs	392	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	PathOfTravel	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs	450	Active
Error	CS0246	The type or namespace name 'ViewPlan' could not be found (are you missing a using directive or an assembly reference?)	PathOfTravel	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs	450	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	PathOfTravel	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs	450	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	PathOfTravel	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs	450	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	PathOfTravel	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs	493	Active
Error	CS0246	The type or namespace name 'ViewPlan' could not be found (are you missing a using directive or an assembly reference?)	PathOfTravel	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs	493	Active
Error	CS0246	The type or namespace name 'Room' could not be found (are you missing a using directive or an assembly reference?)	PathOfTravel	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs	493	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	PathOfTravel	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs	493	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	PathOfTravel	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs	523	Active
Error	CS0246	The type or namespace name 'ViewPlan' could not be found (are you missing a using directive or an assembly reference?)	PathOfTravel	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs	523	Active
Error	CS0246	The type or namespace name 'Room' could not be found (are you missing a using directive or an assembly reference?)	PathOfTravel	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs	523	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	PathOfTravel	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs	523	Active
Error	CS0246	The type or namespace name 'PathOfTravelCalculationStatus' could not be found (are you missing a using directive or an assembly reference?)	PathOfTravel	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs	540	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathReinforcement\CS\BarTypeConverter.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathReinforcement\CS\BarTypeConverter.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathReinforcement\CS\Command.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathReinforcement\CS\Command.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathReinforcement\CS\Command.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathReinforcement\CS\Command.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathReinforcement\CS\Command.cs	40	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	PathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathReinforcement\CS\Command.cs	40	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathReinforcement\CS\Command.cs	41	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	PathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathReinforcement\CS\Command.cs	41	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathReinforcement\CS\Command.cs	42	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	PathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathReinforcement\CS\Command.cs	42	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	PathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathReinforcement\CS\Command.cs	43	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathReinforcement\CS\Command.cs	78	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	PathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathReinforcement\CS\Command.cs	78	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathReinforcement\CS\Command.cs	79	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathReinforcement\CS\MathTools.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathReinforcement\CS\MathTools.cs	131	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathReinforcement\CS\PathReinforcementForm.cs	43	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathReinforcement\CS\PathReinforcementForm.cs	65	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathReinforcement\CS\PathReinforcementForm.cs	66	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathReinforcement\CS\PathReinProperties.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathReinforcement\CS\PathReinProperties.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathReinforcement\CS\PathReinProperties.cs	77	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathReinforcement\CS\PathReinProperties.cs	102	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathReinforcement\CS\PathReinProperties.cs	125	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathReinforcement\CS\PathReinProperties.cs	264	Active
Error	CS0246	The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)	PathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathReinforcement\CS\PathReinProperties.cs	318	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathReinforcement\CS\Profile.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathReinforcement\CS\Profile.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathReinforcement\CS\Profile.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathReinforcement\CS\Profile.cs	43	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathReinforcement\CS\Profile.cs	48	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	PathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathReinforcement\CS\Profile.cs	54	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	PathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathReinforcement\CS\Profile.cs	59	Active
Error	CS0246	The type or namespace name 'BoundingBoxUV' could not be found (are you missing a using directive or an assembly reference?)	PathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathReinforcement\CS\Profile.cs	65	Active
Error	CS0246	The type or namespace name 'UV' could not be found (are you missing a using directive or an assembly reference?)	PathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathReinforcement\CS\Profile.cs	71	Active
Error	CS0246	The type or namespace name 'UV' could not be found (are you missing a using directive or an assembly reference?)	PathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathReinforcement\CS\Profile.cs	76	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathReinforcement\CS\Profile.cs	83	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	PathReinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathReinforcement\CS\Profile.cs	83	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PerformanceAdviserControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PerformanceAdviserControl\CS\Application.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PerformanceAdviserControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PerformanceAdviserControl\CS\Application.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PerformanceAdviserControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PerformanceAdviserControl\CS\Application.cs	36	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PerformanceAdviserControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PerformanceAdviserControl\CS\Application.cs	70	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PerformanceAdviserControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PerformanceAdviserControl\CS\Application.cs	70	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PerformanceAdviserControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PerformanceAdviserControl\CS\Application.cs	105	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PerformanceAdviserControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PerformanceAdviserControl\CS\Application.cs	105	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PerformanceAdviserControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PerformanceAdviserControl\CS\FlippedDoorCheck.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PerformanceAdviserControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PerformanceAdviserControl\CS\FlippedDoorCheck.cs	35	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PerformanceAdviserControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PerformanceAdviserControl\CS\FlippedDoorCheck.cs	59	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PerformanceAdviserControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PerformanceAdviserControl\CS\FlippedDoorCheck.cs	79	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PerformanceAdviserControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PerformanceAdviserControl\CS\FlippedDoorCheck.cs	79	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PerformanceAdviserControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PerformanceAdviserControl\CS\FlippedDoorCheck.cs	99	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PerformanceAdviserControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PerformanceAdviserControl\CS\FlippedDoorCheck.cs	133	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PerformanceAdviserControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PerformanceAdviserControl\CS\FlippedDoorCheck.cs	133	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PerformanceAdviserControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PerformanceAdviserControl\CS\FlippedDoorCheck.cs	167	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PerformanceAdviserControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PerformanceAdviserControl\CS\FlippedDoorCheck.cs	176	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PerformanceAdviserControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PerformanceAdviserControl\CS\FlippedDoorCheck.cs	188	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PerformanceAdviserControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PerformanceAdviserControl\CS\FlippedDoorCheck.cs	203	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PerformanceAdviserControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PerformanceAdviserControl\CS\FlippedDoorCheck.cs	208	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PerformanceAdviserControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PerformanceAdviserControl\CS\FlippedDoorCheck.cs	213	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PerformanceAdviserControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PerformanceAdviserControl\CS\RuleInfo.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PerformanceAdviserControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PerformanceAdviserControl\CS\RuleInfo.cs	27	Active
Error	CS0246	The type or namespace name 'PerformanceAdviserRuleId' could not be found (are you missing a using directive or an assembly reference?)	PerformanceAdviserControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PerformanceAdviserControl\CS\RuleInfo.cs	37	Active
Error	CS0246	The type or namespace name 'PerformanceAdviserRuleId' could not be found (are you missing a using directive or an assembly reference?)	PerformanceAdviserControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PerformanceAdviserControl\CS\RuleInfo.cs	46	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PerformanceAdviserControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PerformanceAdviserControl\CS\TestDisplayDialog.cs	30	Active
Error	CS0246	The type or namespace name 'PerformanceAdviser' could not be found (are you missing a using directive or an assembly reference?)	PerformanceAdviserControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PerformanceAdviserControl\CS\TestDisplayDialog.cs	42	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	PerformanceAdviserControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PerformanceAdviserControl\CS\TestDisplayDialog.cs	42	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PerformanceAdviserControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PerformanceAdviserControl\CS\TestDisplayDialog.cs	140	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PerformanceAdviserControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PerformanceAdviserControl\CS\TestDisplayDialog.cs	141	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PerformanceAdviserControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PerformanceAdviserControl\CS\UICommand.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PerformanceAdviserControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PerformanceAdviserControl\CS\UICommand.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PerformanceAdviserControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PerformanceAdviserControl\CS\UICommand.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PerformanceAdviserControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PerformanceAdviserControl\CS\UICommand.cs	32	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	PerformanceAdviserControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PerformanceAdviserControl\CS\UICommand.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PerformanceAdviserControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PerformanceAdviserControl\CS\UICommand.cs	33	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	PerformanceAdviserControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PerformanceAdviserControl\CS\UICommand.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PerformanceAdviserControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PerformanceAdviserControl\CS\UICommand.cs	34	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	PerformanceAdviserControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PerformanceAdviserControl\CS\UICommand.cs	34	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PerformanceAdviserControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PerformanceAdviserControl\CS\UICommand.cs	35	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	PerformanceAdviserControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PerformanceAdviserControl\CS\UICommand.cs	57	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	PerformanceAdviserControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PerformanceAdviserControl\CS\UICommand.cs	57	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PerformanceAdviserControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PerformanceAdviserControl\CS\UICommand.cs	57	Active
Error	BC40056	Namespace or type specified in the Imports 'Autodesk' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.	PhaseSample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PhaseSample\VB.NET\Command.vb	22	Active
Error	BC30002	Type 'Autodesk.Revit.Attributes.Transaction' is not defined.	PhaseSample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PhaseSample\VB.NET\Command.vb	23	Active
Error	BC30451	'Autodesk' is not declared. It may be inaccessible due to its protection level.	PhaseSample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PhaseSample\VB.NET\Command.vb	23	Active
Error	BC30002	Type 'Autodesk.Revit.Attributes.Regeneration' is not defined.	PhaseSample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PhaseSample\VB.NET\Command.vb	24	Active
Error	BC30451	'Autodesk' is not declared. It may be inaccessible due to its protection level.	PhaseSample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PhaseSample\VB.NET\Command.vb	24	Active
Error	BC30002	Type 'Autodesk.Revit.Attributes.Journaling' is not defined.	PhaseSample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PhaseSample\VB.NET\Command.vb	25	Active
Error	BC30451	'Autodesk' is not declared. It may be inaccessible due to its protection level.	PhaseSample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PhaseSample\VB.NET\Command.vb	25	Active
Error	BC30002	Type 'Autodesk.Revit.UI.IExternalCommand' is not defined.	PhaseSample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PhaseSample\VB.NET\Command.vb	28	Active
Error	BC30002	Type 'Autodesk.Revit.UI.ExternalCommandData' is not defined.	PhaseSample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PhaseSample\VB.NET\Command.vb	46	Active
Error	BC30002	Type 'Autodesk.Revit.DB.ElementSet' is not defined.	PhaseSample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PhaseSample\VB.NET\Command.vb	46	Active
Error	BC30002	Type 'Autodesk.Revit.UI.Result' is not defined.	PhaseSample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PhaseSample\VB.NET\Command.vb	46	Active
Error	BC30002	Type 'Autodesk.Revit.UI.IExternalCommand' is not defined.	PhaseSample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PhaseSample\VB.NET\Command.vb	46	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PhysicalProp	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PhysicalProp\CS\Command.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PhysicalProp	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PhysicalProp\CS\Command.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PhysicalProp	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PhysicalProp\CS\Command.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PhysicalProp	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PhysicalProp\CS\Command.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PhysicalProp	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PhysicalProp\CS\Command.cs	37	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	PhysicalProp	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PhysicalProp\CS\Command.cs	37	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PhysicalProp	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PhysicalProp\CS\Command.cs	38	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	PhysicalProp	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PhysicalProp\CS\Command.cs	38	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PhysicalProp	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PhysicalProp\CS\Command.cs	39	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	PhysicalProp	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PhysicalProp\CS\Command.cs	39	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PhysicalProp	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PhysicalProp\CS\Command.cs	40	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PhysicalProp	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PhysicalProp\CS\Command.cs	58	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	PhysicalProp	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PhysicalProp\CS\Command.cs	58	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	PhysicalProp	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PhysicalProp\CS\Command.cs	59	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PlaceFamilyInstanceByFace	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlaceFamilyInstanceByFace\CS\Command.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PlaceFamilyInstanceByFace	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlaceFamilyInstanceByFace\CS\Command.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PlaceFamilyInstanceByFace	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlaceFamilyInstanceByFace\CS\Command.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PlaceFamilyInstanceByFace	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlaceFamilyInstanceByFace\CS\Command.cs	37	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	PlaceFamilyInstanceByFace	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlaceFamilyInstanceByFace\CS\Command.cs	37	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PlaceFamilyInstanceByFace	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlaceFamilyInstanceByFace\CS\Command.cs	38	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	PlaceFamilyInstanceByFace	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlaceFamilyInstanceByFace\CS\Command.cs	38	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PlaceFamilyInstanceByFace	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlaceFamilyInstanceByFace\CS\Command.cs	39	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	PlaceFamilyInstanceByFace	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlaceFamilyInstanceByFace\CS\Command.cs	39	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	PlaceFamilyInstanceByFace	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlaceFamilyInstanceByFace\CS\Command.cs	40	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PlaceFamilyInstanceByFace	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlaceFamilyInstanceByFace\CS\Command.cs	58	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PlaceFamilyInstanceByFace	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlaceFamilyInstanceByFace\CS\Command.cs	58	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	PlaceFamilyInstanceByFace	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlaceFamilyInstanceByFace\CS\Command.cs	60	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PlaceFamilyInstanceByFace	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlaceFamilyInstanceByFace\CS\FamilyInstanceCreator.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PlaceFamilyInstanceByFace	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlaceFamilyInstanceByFace\CS\FamilyInstanceCreator.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PlaceFamilyInstanceByFace	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlaceFamilyInstanceByFace\CS\FamilyInstanceCreator.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PlaceFamilyInstanceByFace	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlaceFamilyInstanceByFace\CS\FamilyInstanceCreator.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PlaceFamilyInstanceByFace	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlaceFamilyInstanceByFace\CS\FamilyInstanceCreator.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PlaceFamilyInstanceByFace	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlaceFamilyInstanceByFace\CS\FamilyInstanceCreator.cs	34	Active
Error	CS0246	The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)	PlaceFamilyInstanceByFace	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlaceFamilyInstanceByFace\CS\FamilyInstanceCreator.cs	45	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PlaceFamilyInstanceByFace	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlaceFamilyInstanceByFace\CS\FamilyInstanceCreator.cs	47	Active
Error	CS0246	The type or namespace name 'Face' could not be found (are you missing a using directive or an assembly reference?)	PlaceFamilyInstanceByFace	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlaceFamilyInstanceByFace\CS\FamilyInstanceCreator.cs	51	Active
Error	CS0246	The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)	PlaceFamilyInstanceByFace	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlaceFamilyInstanceByFace\CS\FamilyInstanceCreator.cs	53	Active
Error	CS0246	The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)	PlaceFamilyInstanceByFace	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlaceFamilyInstanceByFace\CS\FamilyInstanceCreator.cs	75	Active
Error	CS0246	The type or namespace name 'Face' could not be found (are you missing a using directive or an assembly reference?)	PlaceFamilyInstanceByFace	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlaceFamilyInstanceByFace\CS\FamilyInstanceCreator.cs	86	Active
Error	CS0246	The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)	PlaceFamilyInstanceByFace	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlaceFamilyInstanceByFace\CS\FamilyInstanceCreator.cs	97	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PlaceFamilyInstanceByFace	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlaceFamilyInstanceByFace\CS\FamilyInstanceCreator.cs	137	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PlaceFamilyInstanceByFace	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlaceFamilyInstanceByFace\CS\FamilyInstanceCreator.cs	248	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PlaceFamilyInstanceByFace	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlaceFamilyInstanceByFace\CS\FamilyInstanceCreator.cs	248	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PlaceFamilyInstanceByFace	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlaceFamilyInstanceByFace\CS\FamilyInstanceCreator.cs	273	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PlaceFamilyInstanceByFace	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlaceFamilyInstanceByFace\CS\FamilyInstanceCreator.cs	273	Active
Error	CS0246	The type or namespace name 'BoundingBoxXYZ' could not be found (are you missing a using directive or an assembly reference?)	PlaceFamilyInstanceByFace	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlaceFamilyInstanceByFace\CS\FamilyInstanceCreator.cs	340	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PlaceFamilyInstanceByFace	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlaceFamilyInstanceByFace\CS\FamilyInstanceCreator.cs	469	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	PlaceFamilyInstanceByFace	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlaceFamilyInstanceByFace\CS\FamilyInstanceCreator.cs	469	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PlaceFamilyInstanceByFace	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlaceFamilyInstanceByFace\CS\FamilyInstanceCreator.cs	469	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PlaceFamilyInstanceByFace	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlaceFamilyInstanceByFace\CS\PlaceFamilyInstanceForm.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PlaceFamilyInstanceByFace	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlaceFamilyInstanceByFace\CS\PointUserControl.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PlaceFamilyInstanceByFace	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlaceFamilyInstanceByFace\CS\PointUserControl.cs	66	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PlaceFamilyInstanceByFace	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlaceFamilyInstanceByFace\CS\PointUserControl.cs	81	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PlacementOptions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlacementOptions\CS\Command.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PlacementOptions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlacementOptions\CS\Command.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PlacementOptions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlacementOptions\CS\Command.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PlacementOptions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlacementOptions\CS\Command.cs	39	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	PlacementOptions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlacementOptions\CS\Command.cs	39	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PlacementOptions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlacementOptions\CS\Command.cs	40	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	PlacementOptions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlacementOptions\CS\Command.cs	40	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	PlacementOptions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlacementOptions\CS\Command.cs	41	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	PlacementOptions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlacementOptions\CS\Command.cs	59	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	PlacementOptions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlacementOptions\CS\Command.cs	59	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	PlacementOptions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlacementOptions\CS\Command.cs	60	Active
Error	CS0246	The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)	PlacementOptions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlacementOptions\CS\Command.cs	129	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	PlacementOptions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlacementOptions\CS\Command.cs	129	Active
Error	CS0246	The type or namespace name 'BuiltInCategory' could not be found (are you missing a using directive or an assembly reference?)	PlacementOptions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlacementOptions\CS\Command.cs	129	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PlacementOptions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlacementOptions\CS\FacebasedForm.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PlacementOptions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlacementOptions\CS\FacebasedForm.cs	33	Active
Error	CS0246	The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)	PlacementOptions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlacementOptions\CS\FacebasedForm.cs	42	Active
Error	CS0246	The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)	PlacementOptions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlacementOptions\CS\FacebasedForm.cs	43	Active
Error	CS0246	The type or namespace name 'PromptForFamilyInstancePlacementOptions' could not be found (are you missing a using directive or an assembly reference?)	PlacementOptions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlacementOptions\CS\FacebasedForm.cs	44	Active
Error	CS0246	The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)	PlacementOptions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlacementOptions\CS\FacebasedForm.cs	49	Active
Error	CS0246	The type or namespace name 'PromptForFamilyInstancePlacementOptions' could not be found (are you missing a using directive or an assembly reference?)	PlacementOptions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlacementOptions\CS\FacebasedForm.cs	71	Active
Error	CS0246	The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)	PlacementOptions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlacementOptions\CS\FacebasedForm.cs	82	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PlacementOptions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlacementOptions\CS\SketchbasedForm.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PlacementOptions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlacementOptions\CS\SketchbasedForm.cs	33	Active
Error	CS0246	The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)	PlacementOptions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlacementOptions\CS\SketchbasedForm.cs	42	Active
Error	CS0246	The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)	PlacementOptions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlacementOptions\CS\SketchbasedForm.cs	43	Active
Error	CS0246	The type or namespace name 'PromptForFamilyInstancePlacementOptions' could not be found (are you missing a using directive or an assembly reference?)	PlacementOptions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlacementOptions\CS\SketchbasedForm.cs	44	Active
Error	CS0246	The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)	PlacementOptions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlacementOptions\CS\SketchbasedForm.cs	49	Active
Error	CS0246	The type or namespace name 'PromptForFamilyInstancePlacementOptions' could not be found (are you missing a using directive or an assembly reference?)	PlacementOptions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlacementOptions\CS\SketchbasedForm.cs	71	Active
Error	CS0246	The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)	PlacementOptions	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlacementOptions\CS\SketchbasedForm.cs	82	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\FileBasedPointCloud.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\FileBasedPointCloud.cs	32	Active
Error	CS0246	The type or namespace name 'IPointCloudAccess' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\FileBasedPointCloud.cs	62	Active
Error	CS0246	The type or namespace name 'PointCloudColorEncoding' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\FileBasedPointCloud.cs	111	Active
Error	CS0246	The type or namespace name 'IPointSetIterator' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\FileBasedPointCloud.cs	122	Active
Error	CS0246	The type or namespace name 'PointCloudFilter' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\FileBasedPointCloud.cs	122	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\FileBasedPointCloud.cs	122	Active
Error	CS0246	The type or namespace name 'IPointSetIterator' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\FileBasedPointCloud.cs	134	Active
Error	CS0246	The type or namespace name 'PointCloudFilter' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\FileBasedPointCloud.cs	134	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\FileBasedPointCloud.cs	134	Active
Error	CS0246	The type or namespace name 'Outline' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\FileBasedPointCloud.cs	143	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\FileBasedPointCloud.cs	153	Active
Error	CS0246	The type or namespace name 'PointCloudFilter' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\FileBasedPointCloud.cs	175	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\FileBasedPointCloud.cs	175	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudAccessBase.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudAccessBase.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudAccessBase.cs	30	Active
Error	CS0246	The type or namespace name 'Outline' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudAccessBase.cs	44	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudAccessBase.cs	63	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudAccessBase.cs	63	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudAccessBase.cs	78	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudAccessBase.cs	78	Active
Error	CS0246	The type or namespace name 'Outline' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudAccessBase.cs	113	Active
Error	CS0246	The type or namespace name 'PointCloudFilter' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudAccessBase.cs	156	Active
Error	CS0246	The type or namespace name 'IPointSetIterator' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudAccessBase.cs	275	Active
Error	CS0246	The type or namespace name 'PointCloudFilter' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudAccessBase.cs	278	Active
Error	CS0246	The type or namespace name 'PointCloudFilter' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudAccessBase.cs	290	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudCellStorage.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudCellStorage.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudCellStorage.cs	28	Active
Error	CS0246	The type or namespace name 'CloudPoint' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudCellStorage.cs	49	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudCellStorage.cs	51	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudCellStorage.cs	52	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudCellStorage.cs	72	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudCellStorage.cs	80	Active
Error	CS0246	The type or namespace name 'CloudPoint' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudCellStorage.cs	88	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudCellStorage.cs	102	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudCellStorage.cs	102	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudCellStorage.cs	140	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudCellStorage.cs	140	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudCellStorage.cs	154	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudCellStorage.cs	154	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudCellStorage.cs	167	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudEngineSample.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudEngineSample.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudEngineSample.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudEngineSample.cs	37	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudEngineSample.cs	37	Active
Error	CS0246	The type or namespace name 'IExternalApplication' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudEngineSample.cs	38	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudEngineSample.cs	47	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudEngineSample.cs	47	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudEngineSample.cs	106	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudEngineSample.cs	106	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudEngineSample.cs	117	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudEngineSample.cs	117	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudEngineSample.cs	118	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudEngineSample.cs	128	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudEngineSample.cs	128	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudEngineSample.cs	128	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudEngineSample.cs	143	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudEngineSample.cs	143	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudEngineSample.cs	144	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudEngineSample.cs	154	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudEngineSample.cs	154	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudEngineSample.cs	154	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudEngineSample.cs	169	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudEngineSample.cs	169	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudEngineSample.cs	170	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudEngineSample.cs	180	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudEngineSample.cs	180	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudEngineSample.cs	180	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudEngineSample.cs	205	Active
Error	CS0246	The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudEngineSample.cs	205	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudEngineSample.cs	218	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudEngineSample.cs	218	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudEngineSample.cs	219	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudEngineSample.cs	229	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudEngineSample.cs	229	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudEngineSample.cs	229	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PredefinedPointCloud.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PredefinedPointCloud.cs	29	Active
Error	CS0246	The type or namespace name 'IPointCloudAccess' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PredefinedPointCloud.cs	38	Active
Error	CS0246	The type or namespace name 'PointCloudColorEncoding' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PredefinedPointCloud.cs	105	Active
Error	CS0246	The type or namespace name 'IPointSetIterator' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PredefinedPointCloud.cs	116	Active
Error	CS0246	The type or namespace name 'PointCloudFilter' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PredefinedPointCloud.cs	116	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PredefinedPointCloud.cs	116	Active
Error	CS0246	The type or namespace name 'IPointSetIterator' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PredefinedPointCloud.cs	128	Active
Error	CS0246	The type or namespace name 'PointCloudFilter' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PredefinedPointCloud.cs	128	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PredefinedPointCloud.cs	128	Active
Error	CS0246	The type or namespace name 'Outline' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PredefinedPointCloud.cs	137	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PredefinedPointCloud.cs	147	Active
Error	CS0246	The type or namespace name 'PointCloudFilter' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PredefinedPointCloud.cs	169	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PredefinedPointCloud.cs	169	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PredefinedPointCloudEngine.cs	25	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PredefinedPointCloudEngine.cs	26	Active
Error	CS0246	The type or namespace name 'IPointCloudEngine' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PredefinedPointCloudEngine.cs	54	Active
Error	CS0246	The type or namespace name 'IPointCloudAccess' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PredefinedPointCloudEngine.cs	78	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\XmlUtils.cs	26	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\XmlUtils.cs	40	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	PointCloudEngine	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\XmlUtils.cs	95	Active
Error	CS0234	The type or namespace name 'Office' does not exist in the namespace 'Microsoft' (are you missing an assembly reference?)	PointCurveCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PointCurveCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PointCurveCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PointCurveCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PointCurveCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs	39	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	PointCurveCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs	39	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PointCurveCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs	40	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	PointCurveCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs	40	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	PointCurveCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs	41	Active
Error	CS0246	The type or namespace name 'AddInId' could not be found (are you missing a using directive or an assembly reference?)	PointCurveCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs	59	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	PointCurveCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs	60	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	PointCurveCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs	60	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	PointCurveCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs	60	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PointCurveCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs	101	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	PointCurveCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs	101	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PointCurveCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs	102	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	PointCurveCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs	102	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	PointCurveCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs	103	Active
Error	CS0246	The type or namespace name 'AddInId' could not be found (are you missing a using directive or an assembly reference?)	PointCurveCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs	105	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	PointCurveCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs	122	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	PointCurveCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs	122	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	PointCurveCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs	122	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PointCurveCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs	152	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	PointCurveCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs	152	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PointCurveCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs	153	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	PointCurveCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs	153	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	PointCurveCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs	154	Active
Error	CS0246	The type or namespace name 'AddInId' could not be found (are you missing a using directive or an assembly reference?)	PointCurveCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs	156	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	PointCurveCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs	173	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	PointCurveCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs	173	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	PointCurveCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs	173	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PointCurveCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs	207	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	PointCurveCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs	207	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PointCurveCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs	208	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	PointCurveCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs	208	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	PointCurveCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs	209	Active
Error	CS0246	The type or namespace name 'AddInId' could not be found (are you missing a using directive or an assembly reference?)	PointCurveCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs	211	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	PointCurveCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs	229	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	PointCurveCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs	229	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	PointCurveCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs	229	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PointCurveCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs	259	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	PointCurveCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs	259	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PointCurveCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs	260	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	PointCurveCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs	260	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	PointCurveCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs	261	Active
Error	CS0246	The type or namespace name 'AddInId' could not be found (are you missing a using directive or an assembly reference?)	PointCurveCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs	263	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	PointCurveCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs	281	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	PointCurveCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs	281	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	PointCurveCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs	281	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PointCurveCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs	311	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	PointCurveCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs	311	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PointCurveCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs	312	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	PointCurveCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs	312	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	PointCurveCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs	313	Active
Error	CS0246	The type or namespace name 'AddInId' could not be found (are you missing a using directive or an assembly reference?)	PointCurveCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs	315	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	PointCurveCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs	333	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	PointCurveCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs	333	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	PointCurveCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs	333	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PointCurveCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs	365	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	PointCurveCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs	365	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PointCurveCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs	366	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	PointCurveCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs	366	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	PointCurveCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs	367	Active
Error	CS0246	The type or namespace name 'AddInId' could not be found (are you missing a using directive or an assembly reference?)	PointCurveCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs	369	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	PointCurveCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs	387	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	PointCurveCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs	387	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	PointCurveCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs	387	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PostCommandWorkflow	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PostCommandWorkflow\CS\Application.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PostCommandWorkflow	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PostCommandWorkflow\CS\Application.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PostCommandWorkflow	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PostCommandWorkflow\CS\Application.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PostCommandWorkflow	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PostCommandWorkflow\CS\Application.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PostCommandWorkflow	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PostCommandWorkflow\CS\Application.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PostCommandWorkflow	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PostCommandWorkflow\CS\Application.cs	42	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	PostCommandWorkflow	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PostCommandWorkflow\CS\Application.cs	42	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PostCommandWorkflow	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PostCommandWorkflow\CS\Application.cs	43	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	PostCommandWorkflow	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PostCommandWorkflow\CS\Application.cs	43	Active
Error	CS0246	The type or namespace name 'IExternalApplication' could not be found (are you missing a using directive or an assembly reference?)	PostCommandWorkflow	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PostCommandWorkflow\CS\Application.cs	44	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	PostCommandWorkflow	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PostCommandWorkflow\CS\Application.cs	52	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	PostCommandWorkflow	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PostCommandWorkflow\CS\Application.cs	52	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	PostCommandWorkflow	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PostCommandWorkflow\CS\Application.cs	62	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	PostCommandWorkflow	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PostCommandWorkflow\CS\Application.cs	62	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	PostCommandWorkflow	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PostCommandWorkflow\CS\Application.cs	74	Active
Error	CS0246	The type or namespace name 'PushButton' could not be found (are you missing a using directive or an assembly reference?)	PostCommandWorkflow	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PostCommandWorkflow\CS\Application.cs	93	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PostCommandWorkflow	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PostCommandWorkflow\CS\PostCommandRevisionMonitor.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PostCommandWorkflow	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PostCommandWorkflow\CS\PostCommandRevisionMonitor.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PostCommandWorkflow	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PostCommandWorkflow\CS\PostCommandRevisionMonitor.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PostCommandWorkflow	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PostCommandWorkflow\CS\PostCommandRevisionMonitor.cs	30	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	PostCommandWorkflow	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PostCommandWorkflow\CS\PostCommandRevisionMonitor.cs	44	Active
Error	CS0246	The type or namespace name 'DocumentSavingEventArgs' could not be found (are you missing a using directive or an assembly reference?)	PostCommandWorkflow	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PostCommandWorkflow\CS\PostCommandRevisionMonitor.cs	78	Active
Error	CS0246	The type or namespace name 'DialogBoxShowingEventArgs' could not be found (are you missing a using directive or an assembly reference?)	PostCommandWorkflow	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PostCommandWorkflow\CS\PostCommandRevisionMonitor.cs	141	Active
Error	CS0246	The type or namespace name 'BeforeExecutedEventArgs' could not be found (are you missing a using directive or an assembly reference?)	PostCommandWorkflow	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PostCommandWorkflow\CS\PostCommandRevisionMonitor.cs	154	Active
Error	CS0246	The type or namespace name 'IExternalEventHandler' could not be found (are you missing a using directive or an assembly reference?)	PostCommandWorkflow	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PostCommandWorkflow\CS\PostCommandRevisionMonitor.cs	164	Active
Error	CS0246	The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)	PostCommandWorkflow	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PostCommandWorkflow\CS\PostCommandRevisionMonitor.cs	172	Active
Error	CS0246	The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)	PostCommandWorkflow	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PostCommandWorkflow\CS\PostCommandRevisionMonitor.cs	209	Active
Error	CS0246	The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)	PostCommandWorkflow	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PostCommandWorkflow\CS\PostCommandRevisionMonitor.cs	231	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PostCommandWorkflow	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PostCommandWorkflow\CS\PostCommandRevisionMonitor.cs	253	Active
Error	CS0246	The type or namespace name 'AddInCommandBinding' could not be found (are you missing a using directive or an assembly reference?)	PostCommandWorkflow	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PostCommandWorkflow\CS\PostCommandRevisionMonitor.cs	258	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	PostCommandWorkflow	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PostCommandWorkflow\CS\PostCommandRevisionMonitor.cs	263	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	PostCommandWorkflow	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PostCommandWorkflow\CS\PostCommandRevisionMonitor.cs	270	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PostCommandWorkflow	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PostCommandWorkflow\CS\PostCommandRevisionMonitorCommand.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PostCommandWorkflow	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PostCommandWorkflow\CS\PostCommandRevisionMonitorCommand.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PostCommandWorkflow	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PostCommandWorkflow\CS\PostCommandRevisionMonitorCommand.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PostCommandWorkflow	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PostCommandWorkflow\CS\PostCommandRevisionMonitorCommand.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PostCommandWorkflow	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PostCommandWorkflow\CS\PostCommandRevisionMonitorCommand.cs	37	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	PostCommandWorkflow	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PostCommandWorkflow\CS\PostCommandRevisionMonitorCommand.cs	37	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	PostCommandWorkflow	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PostCommandWorkflow\CS\PostCommandRevisionMonitorCommand.cs	38	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	PostCommandWorkflow	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PostCommandWorkflow\CS\PostCommandRevisionMonitorCommand.cs	49	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	PostCommandWorkflow	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PostCommandWorkflow\CS\PostCommandRevisionMonitorCommand.cs	49	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	PostCommandWorkflow	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PostCommandWorkflow\CS\PostCommandRevisionMonitorCommand.cs	49	Active
Error	CS0246	The type or namespace name 'PushButton' could not be found (are you missing a using directive or an assembly reference?)	PostCommandWorkflow	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PostCommandWorkflow\CS\PostCommandRevisionMonitorCommand.cs	74	Active
Error	CS0246	The type or namespace name 'PushButton' could not be found (are you missing a using directive or an assembly reference?)	PostCommandWorkflow	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PostCommandWorkflow\CS\PostCommandRevisionMonitorCommand.cs	87	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PowerCircuit	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PowerCircuit\CS\CircuitOperationData.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PowerCircuit	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PowerCircuit\CS\CircuitOperationData.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PowerCircuit	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PowerCircuit\CS\CircuitOperationData.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PowerCircuit	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PowerCircuit\CS\CircuitOperationData.cs	34	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PowerCircuit	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PowerCircuit\CS\CircuitOperationData.cs	35	Active
Error	CS0246	The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)	PowerCircuit	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PowerCircuit\CS\CircuitOperationData.cs	49	Active
Error	CS0246	The type or namespace name 'Selection' could not be found (are you missing a using directive or an assembly reference?)	PowerCircuit	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PowerCircuit\CS\CircuitOperationData.cs	54	Active
Error	CS0246	The type or namespace name 'ElectricalSystem' could not be found (are you missing a using directive or an assembly reference?)	PowerCircuit	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PowerCircuit\CS\CircuitOperationData.cs	84	Active
Error	CS0246	The type or namespace name 'ElectricalSystem' could not be found (are you missing a using directive or an assembly reference?)	PowerCircuit	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PowerCircuit\CS\CircuitOperationData.cs	94	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	PowerCircuit	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PowerCircuit\CS\CircuitOperationData.cs	197	Active
Error	CS0246	The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)	PowerCircuit	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PowerCircuit\CS\CircuitOperationData.cs	253	Active
Error	CS0246	The type or namespace name 'MEPModel' could not be found (are you missing a using directive or an assembly reference?)	PowerCircuit	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PowerCircuit\CS\CircuitOperationData.cs	642	Active
Error	CS0246	The type or namespace name 'ElectricalSystem' could not be found (are you missing a using directive or an assembly reference?)	PowerCircuit	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PowerCircuit\CS\CircuitOperationData.cs	643	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PowerCircuit	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PowerCircuit\CS\Command.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PowerCircuit	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PowerCircuit\CS\Command.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PowerCircuit	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PowerCircuit\CS\Command.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PowerCircuit	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PowerCircuit\CS\Command.cs	41	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	PowerCircuit	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PowerCircuit\CS\Command.cs	41	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PowerCircuit	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PowerCircuit\CS\Command.cs	42	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	PowerCircuit	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PowerCircuit\CS\Command.cs	42	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PowerCircuit	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PowerCircuit\CS\Command.cs	43	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	PowerCircuit	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PowerCircuit\CS\Command.cs	43	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	PowerCircuit	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PowerCircuit\CS\Command.cs	44	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PowerCircuit	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PowerCircuit\CS\Command.cs	62	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	PowerCircuit	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PowerCircuit\CS\Command.cs	62	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PowerCircuit	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PowerCircuit\CS\Command.cs	63	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PowerCircuit	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PowerCircuit\CS\ElectricalSystemItem.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PowerCircuit	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PowerCircuit\CS\ElectricalSystemItem.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PowerCircuit	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PowerCircuit\CS\ElectricalSystemItem.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PowerCircuit	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PowerCircuit\CS\ElectricalSystemItem.cs	47	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PowerCircuit	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PowerCircuit\CS\ElectricalSystemItem.cs	52	Active
Error	CS0246	The type or namespace name 'ElectricalSystem' could not be found (are you missing a using directive or an assembly reference?)	PowerCircuit	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PowerCircuit\CS\ElectricalSystemItem.cs	75	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PrintLog	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\PrintLog\CS\Application.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PrintLog	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\PrintLog\CS\Application.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PrintLog	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\PrintLog\CS\Application.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PrintLog	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\PrintLog\CS\Application.cs	38	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	PrintLog	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\PrintLog\CS\Application.cs	38	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PrintLog	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\PrintLog\CS\Application.cs	39	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	PrintLog	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\PrintLog\CS\Application.cs	39	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PrintLog	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\PrintLog\CS\Application.cs	40	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	PrintLog	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\PrintLog\CS\Application.cs	40	Active
Error	CS0246	The type or namespace name 'IExternalApplication' could not be found (are you missing a using directive or an assembly reference?)	PrintLog	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\PrintLog\CS\Application.cs	41	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PrintLog	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\PrintLog\CS\Application.cs	57	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	PrintLog	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\PrintLog\CS\Application.cs	57	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PrintLog	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\PrintLog\CS\Application.cs	73	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	PrintLog	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\PrintLog\CS\Application.cs	73	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PrintLog	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\PrintLog\CS\Command.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PrintLog	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\PrintLog\CS\Command.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PrintLog	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\PrintLog\CS\Command.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PrintLog	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\PrintLog\CS\Command.cs	38	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	PrintLog	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\PrintLog\CS\Command.cs	38	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PrintLog	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\PrintLog\CS\Command.cs	39	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	PrintLog	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\PrintLog\CS\Command.cs	39	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PrintLog	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\PrintLog\CS\Command.cs	40	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	PrintLog	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\PrintLog\CS\Command.cs	40	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	PrintLog	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\PrintLog\CS\Command.cs	41	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PrintLog	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\PrintLog\CS\Command.cs	60	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	PrintLog	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\PrintLog\CS\Command.cs	60	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PrintLog	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\PrintLog\CS\Command.cs	61	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PrintLog	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\PrintLog\CS\EventsReactor.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PrintLog	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\PrintLog\CS\EventsReactor.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PrintLog	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\PrintLog\CS\EventsReactor.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PrintLog	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\PrintLog\CS\EventsReactor.cs	152	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PrintLog	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\PrintLog\CS\EventsReactor.cs	174	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PrintLog	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\PrintLog\CS\EventsReactor.cs	193	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PrintLog	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\PrintLog\CS\EventsReactor.cs	211	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	PrintLog	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\PrintLog\CS\EventsReactor.cs	265	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	PrintLog	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\PrintLog\CS\EventsReactor.cs	296	Active
Error	CS0246	The type or namespace name 'RevitAPIEventArgs' could not be found (are you missing a using directive or an assembly reference?)	PrintLog	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\PrintLog\CS\EventsReactor.cs	362	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	PrintLog	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\PrintLog\CS\EventsReactor.cs	438	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	PrintLog	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\PrintLog\CS\EventsReactor.cs	438	Active
Error	CS0246	The type or namespace name 'View' could not be found (are you missing a using directive or an assembly reference?)	PrintLog	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\PrintLog\CS\EventsReactor.cs	457	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	PrintLog	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\PrintLog\CS\EventsWatches.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ProgressNotifier	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\ProgressNotifier\CS\Command.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ProgressNotifier	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\ProgressNotifier\CS\Command.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ProgressNotifier	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\ProgressNotifier\CS\Command.cs	39	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	ProgressNotifier	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\ProgressNotifier\CS\Command.cs	39	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	ProgressNotifier	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\ProgressNotifier\CS\Command.cs	40	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	ProgressNotifier	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\ProgressNotifier\CS\Command.cs	58	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	ProgressNotifier	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\ProgressNotifier\CS\Command.cs	58	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	ProgressNotifier	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\ProgressNotifier\CS\Command.cs	58	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ProgressNotifier	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\ProgressNotifier\CS\MainWindow.xaml.cs	48	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ProgressNotifier	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\ProgressNotifier\CS\MainWindow.xaml.cs	61	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ProgressNotifier	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\ProgressNotifier\CS\MainWindow.xaml.cs	66	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ProgressNotifier	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\ProgressNotifier\CS\MainWindow.xaml.cs	180	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ProgressNotifier	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\ProgressNotifier\CS\ProgressItem.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ProgressNotifier	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\ProgressNotifier\CS\ProgressItem.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ProgressNotifier	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\ProgressNotifier\CS\ProgressItem.cs	33	Active
Error	CS0246	The type or namespace name 'ProgressStage' could not be found (are you missing a using directive or an assembly reference?)	ProgressNotifier	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\ProgressNotifier\CS\ProgressItem.cs	66	Active
Error	CS0246	The type or namespace name 'ProgressStage' could not be found (are you missing a using directive or an assembly reference?)	ProgressNotifier	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\ProgressNotifier\CS\ProgressItem.cs	76	Active
Error	CS0246	The type or namespace name 'ProgressStage' could not be found (are you missing a using directive or an assembly reference?)	ProgressNotifier	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\ProgressNotifier\CS\ProgressItem.cs	167	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ProgressNotifier	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\ProgressNotifier\CS\ProgressStack.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ProgressNotifier	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\ProgressNotifier\CS\ProgressStack.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ProgressNotifier	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\ProgressNotifier\CS\ProgressStack.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ProgressNotifier	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\ProgressNotifier\CS\ProgressStack.cs	60	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ProjectInfo	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Command.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ProjectInfo	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Command.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ProjectInfo	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Command.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ProjectInfo	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Command.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ProjectInfo	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Command.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ProjectInfo	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Command.cs	37	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	ProjectInfo	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Command.cs	37	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ProjectInfo	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Command.cs	38	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	ProjectInfo	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Command.cs	38	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ProjectInfo	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Command.cs	39	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	ProjectInfo	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Command.cs	39	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	ProjectInfo	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Command.cs	40	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	ProjectInfo	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Command.cs	60	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	ProjectInfo	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Command.cs	60	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ProjectInfo	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Command.cs	60	Active
Error	CS0246	The type or namespace name 'Application' could not be found (are you missing a using directive or an assembly reference?)	ProjectInfo	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Command.cs	113	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	ProjectInfo	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Command.cs	118	Active
Error	CS0246	The type or namespace name 'ProductType' could not be found (are you missing a using directive or an assembly reference?)	ProjectInfo	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Command.cs	123	Active
Error	CS0246	The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)	ProjectInfo	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Command.cs	347	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	ProjectInfo	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Command.cs	347	Active
Error	CS0246	The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)	ProjectInfo	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Command.cs	351	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ProjectInfo	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Converters\CityConverter.cs	4	Active
Error	CS0246	The type or namespace name 'City' could not be found (are you missing a using directive or an assembly reference?)	ProjectInfo	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Converters\CityConverter.cs	14	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ProjectInfo	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Converters\ConstructionWrapperConverter.cs	4	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ProjectInfo	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Converters\ConstructionWrapperConverter.cs	5	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ProjectInfo	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Converters\Converters.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ProjectInfo	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Converters\ElementIdConverter.cs	4	Active
Error	CS0246	The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)	ProjectInfo	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Converters\ElementIdConverter.cs	12	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ProjectInfo	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Converters\ProjectLocationConverter.cs	4	Active
Error	CS0246	The type or namespace name 'ProjectLocation' could not be found (are you missing a using directive or an assembly reference?)	ProjectInfo	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Converters\ProjectLocationConverter.cs	16	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ProjectInfo	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\RevitVersionAttribute.cs	27	Active
Error	CS0246	The type or namespace name 'ProductType' could not be found (are you missing a using directive or an assembly reference?)	ProjectInfo	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\RevitVersionAttribute.cs	40	Active
Error	CS0246	The type or namespace name 'ProductType' could not be found (are you missing a using directive or an assembly reference?)	ProjectInfo	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\RevitVersionAttribute.cs	47	Active
Error	CS0246	The type or namespace name 'ProductType' could not be found (are you missing a using directive or an assembly reference?)	ProjectInfo	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\RevitVersionAttribute.cs	58	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ProjectInfo	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Wrappers\ConstructionWrapper.cs	3	Active
Error	CS0246	The type or namespace name 'Construction' could not be found (are you missing a using directive or an assembly reference?)	ProjectInfo	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Wrappers\ConstructionWrapper.cs	17	Active
Error	CS0246	The type or namespace name 'Construction' could not be found (are you missing a using directive or an assembly reference?)	ProjectInfo	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Wrappers\ConstructionWrapper.cs	25	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ProjectInfo	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Wrappers\EnergyDataSettingsWrapper.cs	3	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ProjectInfo	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Wrappers\EnergyDataSettingsWrapper.cs	4	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ProjectInfo	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Wrappers\EnergyDataSettingsWrapper.cs	5	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ProjectInfo	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Wrappers\EnergyDataSettingsWrapper.cs	6	Active
Error	CS0246	The type or namespace name 'EnergyDataSettings' could not be found (are you missing a using directive or an assembly reference?)	ProjectInfo	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Wrappers\EnergyDataSettingsWrapper.cs	19	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	ProjectInfo	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Wrappers\EnergyDataSettingsWrapper.cs	23	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	ProjectInfo	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Wrappers\EnergyDataSettingsWrapper.cs	31	Active
Error	CS0246	The type or namespace name 'gbXMLBuildingType' could not be found (are you missing a using directive or an assembly reference?)	ProjectInfo	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Wrappers\EnergyDataSettingsWrapper.cs	45	Active
Error	CS0246	The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)	ProjectInfo	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Wrappers\EnergyDataSettingsWrapper.cs	61	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	ProjectInfo	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Wrappers\EnergyDataSettingsWrapper.cs	62	Active
Error	CS0103	The name 'ProductType' does not exist in the current context	ProjectInfo	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Wrappers\EnergyDataSettingsWrapper.cs	79	Active
Error	CS0246	The type or namespace name 'gbXMLServiceType' could not be found (are you missing a using directive or an assembly reference?)	ProjectInfo	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Wrappers\EnergyDataSettingsWrapper.cs	80	Active
Error	CS0103	The name 'ProductType' does not exist in the current context	ProjectInfo	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Wrappers\EnergyDataSettingsWrapper.cs	95	Active
Error	CS0103	The name 'ProductType' does not exist in the current context	ProjectInfo	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Wrappers\EnergyDataSettingsWrapper.cs	114	Active
Error	CS0246	The type or namespace name 'HVACLoadConstructionClass' could not be found (are you missing a using directive or an assembly reference?)	ProjectInfo	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Wrappers\EnergyDataSettingsWrapper.cs	115	Active
Error	CS0246	The type or namespace name 'Phase' could not be found (are you missing a using directive or an assembly reference?)	ProjectInfo	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Wrappers\EnergyDataSettingsWrapper.cs	131	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	ProjectInfo	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Wrappers\EnergyDataSettingsWrapper.cs	132	Active
Error	CS0246	The type or namespace name 'gbXMLExportComplexity' could not be found (are you missing a using directive or an assembly reference?)	ProjectInfo	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Wrappers\EnergyDataSettingsWrapper.cs	165	Active
Error	CS0103	The name 'ProductType' does not exist in the current context	ProjectInfo	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Wrappers\EnergyDataSettingsWrapper.cs	181	Active
Error	CS0103	The name 'ProductType' does not exist in the current context	ProjectInfo	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Wrappers\EnergyDataSettingsWrapper.cs	199	Active
Error	CS0246	The type or namespace name 'HVACLoadLoadsReportType' could not be found (are you missing a using directive or an assembly reference?)	ProjectInfo	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Wrappers\EnergyDataSettingsWrapper.cs	200	Active
Error	CS0103	The name 'ProductType' does not exist in the current context	ProjectInfo	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Wrappers\EnergyDataSettingsWrapper.cs	215	Active
Error	CS0103	The name 'ProductType' does not exist in the current context	ProjectInfo	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Wrappers\EnergyDataSettingsWrapper.cs	215	Active
Error	CS0246	The type or namespace name 'ProjectLocation' could not be found (are you missing a using directive or an assembly reference?)	ProjectInfo	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Wrappers\EnergyDataSettingsWrapper.cs	216	Active
Error	CS0103	The name 'ProductType' does not exist in the current context	ProjectInfo	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Wrappers\EnergyDataSettingsWrapper.cs	231	Active
Error	CS0103	The name 'ProductType' does not exist in the current context	ProjectInfo	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Wrappers\EnergyDataSettingsWrapper.cs	231	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ProjectInfo	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Wrappers\MEPBuildingConstructionWrapper.cs	3	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ProjectInfo	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Wrappers\MEPBuildingConstructionWrapper.cs	4	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ProjectInfo	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Wrappers\MEPBuildingConstructionWrapper.cs	5	Active
Error	CS0246	The type or namespace name 'MEPBuildingConstruction' could not be found (are you missing a using directive or an assembly reference?)	ProjectInfo	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Wrappers\MEPBuildingConstructionWrapper.cs	18	Active
Error	CS0246	The type or namespace name 'MEPBuildingConstruction' could not be found (are you missing a using directive or an assembly reference?)	ProjectInfo	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Wrappers\MEPBuildingConstructionWrapper.cs	26	Active
Error	CS0246	The type or namespace name 'Construction' could not be found (are you missing a using directive or an assembly reference?)	ProjectInfo	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Wrappers\MEPBuildingConstructionWrapper.cs	231	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ProjectInfo	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Wrappers\ProjectInfoWrapper.cs	3	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ProjectInfo	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Wrappers\ProjectInfoWrapper.cs	16	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ProjectInfo	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Wrappers\ProjectInfoWrapper.cs	24	Active
Error	CS0103	The name 'ProductType' does not exist in the current context	ProjectInfo	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Wrappers\ProjectInfoWrapper.cs	36	Active
Error	CS0103	The name 'ProductType' does not exist in the current context	ProjectInfo	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Wrappers\ProjectInfoWrapper.cs	36	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ProjectInfo	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Wrappers\SiteLocationWrapper.cs	3	Active
Error	CS0246	The type or namespace name 'SiteLocation' could not be found (are you missing a using directive or an assembly reference?)	ProjectInfo	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Wrappers\SiteLocationWrapper.cs	16	Active
Error	CS0246	The type or namespace name 'SiteLocation' could not be found (are you missing a using directive or an assembly reference?)	ProjectInfo	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Wrappers\SiteLocationWrapper.cs	24	Active
Error	CS0246	The type or namespace name 'City' could not be found (are you missing a using directive or an assembly reference?)	ProjectInfo	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Wrappers\SiteLocationWrapper.cs	81	Active
Error	CS0246	The type or namespace name 'City' could not be found (are you missing a using directive or an assembly reference?)	ProjectInfo	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Wrappers\SiteLocationWrapper.cs	95	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ProjectInfo	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Wrappers\Wrappers.cs	25	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ProximityDetection_WallJoinControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\ProximityDetection_WallJoinControl\CS\Command.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ProximityDetection_WallJoinControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\ProximityDetection_WallJoinControl\CS\Command.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ProximityDetection_WallJoinControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\ProximityDetection_WallJoinControl\CS\Command.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ProximityDetection_WallJoinControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\ProximityDetection_WallJoinControl\CS\Command.cs	39	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	ProximityDetection_WallJoinControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\ProximityDetection_WallJoinControl\CS\Command.cs	39	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	ProximityDetection_WallJoinControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\ProximityDetection_WallJoinControl\CS\Command.cs	40	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	ProximityDetection_WallJoinControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\ProximityDetection_WallJoinControl\CS\Command.cs	58	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	ProximityDetection_WallJoinControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\ProximityDetection_WallJoinControl\CS\Command.cs	58	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	ProximityDetection_WallJoinControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\ProximityDetection_WallJoinControl\CS\Command.cs	59	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ProximityDetection_WallJoinControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\ProximityDetection_WallJoinControl\CS\ProximityDetection.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ProximityDetection_WallJoinControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\ProximityDetection_WallJoinControl\CS\ProximityDetection.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ProximityDetection_WallJoinControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\ProximityDetection_WallJoinControl\CS\ProximityDetection.cs	46	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ProximityDetection_WallJoinControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\ProximityDetection_WallJoinControl\CS\ProximityDetection.cs	50	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ProximityDetection_WallJoinControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\ProximityDetection_WallJoinControl\CS\ProximityDetection.cs	58	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ProximityDetection_WallJoinControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\ProximityDetection_WallJoinControl\CS\ProximityDetection.cs	59	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ProximityDetection_WallJoinControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\ProximityDetection_WallJoinControl\CS\ProximityDetection.cs	72	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ProximityDetection_WallJoinControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\ProximityDetection_WallJoinControl\CS\ProximityDetection.cs	73	Active
Error	CS0246	The type or namespace name 'Wall' could not be found (are you missing a using directive or an assembly reference?)	ProximityDetection_WallJoinControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\ProximityDetection_WallJoinControl\CS\ProximityDetection.cs	87	Active
Error	CS0246	The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)	ProximityDetection_WallJoinControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\ProximityDetection_WallJoinControl\CS\ProximityDetection.cs	138	Active
Error	CS0246	The type or namespace name 'Wall' could not be found (are you missing a using directive or an assembly reference?)	ProximityDetection_WallJoinControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\ProximityDetection_WallJoinControl\CS\ProximityDetection.cs	217	Active
Error	CS0246	The type or namespace name 'FilteredElementCollector' could not be found (are you missing a using directive or an assembly reference?)	ProximityDetection_WallJoinControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\ProximityDetection_WallJoinControl\CS\ProximityDetection.cs	300	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	ProximityDetection_WallJoinControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\ProximityDetection_WallJoinControl\CS\ProximityDetection.cs	300	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ProximityDetection_WallJoinControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\ProximityDetection_WallJoinControl\CS\ProximityDetectionAndWallJoinControlForm.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ProximityDetection_WallJoinControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\ProximityDetection_WallJoinControl\CS\ProximityDetectionAndWallJoinControlForm.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ProximityDetection_WallJoinControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\ProximityDetection_WallJoinControl\CS\ProximityDetectionAndWallJoinControlForm.cs	45	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ProximityDetection_WallJoinControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\ProximityDetection_WallJoinControl\CS\ProximityDetectionAndWallJoinControlForm.cs	61	Active
Error	CS0246	The type or namespace name 'Wall' could not be found (are you missing a using directive or an assembly reference?)	ProximityDetection_WallJoinControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\ProximityDetection_WallJoinControl\CS\ProximityDetectionAndWallJoinControlForm.cs	133	Active
Error	CS0246	The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)	ProximityDetection_WallJoinControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\ProximityDetection_WallJoinControl\CS\ProximityDetectionAndWallJoinControlForm.cs	145	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ProximityDetection_WallJoinControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\ProximityDetection_WallJoinControl\CS\WallJoinControl.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ProximityDetection_WallJoinControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\ProximityDetection_WallJoinControl\CS\WallJoinControl.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ProximityDetection_WallJoinControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\ProximityDetection_WallJoinControl\CS\WallJoinControl.cs	46	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ProximityDetection_WallJoinControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\ProximityDetection_WallJoinControl\CS\WallJoinControl.cs	50	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ProximityDetection_WallJoinControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\ProximityDetection_WallJoinControl\CS\WallJoinControl.cs	58	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ProximityDetection_WallJoinControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\ProximityDetection_WallJoinControl\CS\WallJoinControl.cs	59	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ProximityDetection_WallJoinControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\ProximityDetection_WallJoinControl\CS\WallJoinControl.cs	72	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ProximityDetection_WallJoinControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\ProximityDetection_WallJoinControl\CS\WallJoinControl.cs	73	Active
Error	CS0246	The type or namespace name 'Wall' could not be found (are you missing a using directive or an assembly reference?)	ProximityDetection_WallJoinControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\ProximityDetection_WallJoinControl\CS\WallJoinControl.cs	87	Active
Error	CS0246	The type or namespace name 'Wall' could not be found (are you missing a using directive or an assembly reference?)	ProximityDetection_WallJoinControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\ProximityDetection_WallJoinControl\CS\WallJoinControl.cs	137	Active
Error	CS0246	The type or namespace name 'LocationCurve' could not be found (are you missing a using directive or an assembly reference?)	ProximityDetection_WallJoinControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\ProximityDetection_WallJoinControl\CS\WallJoinControl.cs	137	Active
Error	CS0246	The type or namespace name 'Wall' could not be found (are you missing a using directive or an assembly reference?)	ProximityDetection_WallJoinControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\ProximityDetection_WallJoinControl\CS\WallJoinControl.cs	170	Active
Error	CS0246	The type or namespace name 'LocationCurve' could not be found (are you missing a using directive or an assembly reference?)	ProximityDetection_WallJoinControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\ProximityDetection_WallJoinControl\CS\WallJoinControl.cs	170	Active
Error	CS0246	The type or namespace name 'LocationCurve' could not be found (are you missing a using directive or an assembly reference?)	ProximityDetection_WallJoinControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\ProximityDetection_WallJoinControl\CS\WallJoinControl.cs	188	Active
Error	CS0246	The type or namespace name 'Wall' could not be found (are you missing a using directive or an assembly reference?)	ProximityDetection_WallJoinControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\ProximityDetection_WallJoinControl\CS\WallJoinControl.cs	207	Active
Error	CS0246	The type or namespace name 'LocationCurve' could not be found (are you missing a using directive or an assembly reference?)	ProximityDetection_WallJoinControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\ProximityDetection_WallJoinControl\CS\WallJoinControl.cs	219	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RayTraceBounce	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\RaytraceBounce\CS\RayTraceBounce.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RayTraceBounce	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\RaytraceBounce\CS\RayTraceBounce.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RayTraceBounce	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\RaytraceBounce\CS\RayTraceBounce.cs	34	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RayTraceBounce	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\RaytraceBounce\CS\RayTraceBounce.cs	43	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	RayTraceBounce	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\RaytraceBounce\CS\RayTraceBounce.cs	43	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RayTraceBounce	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\RaytraceBounce\CS\RayTraceBounce.cs	44	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	RayTraceBounce	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\RaytraceBounce\CS\RayTraceBounce.cs	44	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RayTraceBounce	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\RaytraceBounce\CS\RayTraceBounce.cs	45	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	RayTraceBounce	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\RaytraceBounce\CS\RayTraceBounce.cs	45	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	RayTraceBounce	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\RaytraceBounce\CS\RayTraceBounce.cs	46	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RayTraceBounce	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\RaytraceBounce\CS\RayTraceBounce.cs	52	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RayTraceBounce	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\RaytraceBounce\CS\RayTraceBounce.cs	57	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RayTraceBounce	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\RaytraceBounce\CS\RayTraceBounce.cs	77	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	RayTraceBounce	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\RaytraceBounce\CS\RayTraceBounce.cs	77	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RayTraceBounce	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\RaytraceBounce\CS\RayTraceBounce.cs	77	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RayTraceBounce	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\RaytraceBounce\CS\RayTraceBounceForm.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RayTraceBounce	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\RaytraceBounce\CS\RayTraceBounceForm.cs	34	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RayTraceBounce	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\RaytraceBounce\CS\RayTraceBounceForm.cs	35	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RayTraceBounce	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\RaytraceBounce\CS\RayTraceBounceForm.cs	73	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	RayTraceBounce	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\RaytraceBounce\CS\RayTraceBounceForm.cs	78	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RayTraceBounce	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\RaytraceBounce\CS\RayTraceBounceForm.cs	83	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RayTraceBounce	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\RaytraceBounce\CS\RayTraceBounceForm.cs	88	Active
Error	CS0246	The type or namespace name 'Face' could not be found (are you missing a using directive or an assembly reference?)	RayTraceBounce	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\RaytraceBounce\CS\RayTraceBounceForm.cs	103	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RayTraceBounce	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\RaytraceBounce\CS\RayTraceBounceForm.cs	108	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RayTraceBounce	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\RaytraceBounce\CS\RayTraceBounceForm.cs	113	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	RayTraceBounce	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\RaytraceBounce\CS\RayTraceBounceForm.cs	136	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RayTraceBounce	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\RaytraceBounce\CS\RayTraceBounceForm.cs	136	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RayTraceBounce	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\RaytraceBounce\CS\RayTraceBounceForm.cs	310	Active
Error	CS0246	The type or namespace name 'ReferenceWithContext' could not be found (are you missing a using directive or an assembly reference?)	RayTraceBounce	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\RaytraceBounce\CS\RayTraceBounceForm.cs	310	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RayTraceBounce	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\RaytraceBounce\CS\RayTraceBounceForm.cs	354	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RayTraceBounce	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\RaytraceBounce\CS\RayTraceBounceForm.cs	354	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RayTraceBounce	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\RaytraceBounce\CS\RayTraceBounceForm.cs	354	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ReadonlySharedParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParameterApplicaton.cs	28	Active
Error	CS0246	The type or namespace name 'IExternalApplication' could not be found (are you missing a using directive or an assembly reference?)	ReadonlySharedParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParameterApplicaton.cs	32	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	ReadonlySharedParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParameterApplicaton.cs	36	Active
Error	CS0246	The type or namespace name 'IExternalApplication' could not be found (are you missing a using directive or an assembly reference?)	ReadonlySharedParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParameterApplicaton.cs	36	Active
Error	CS0538	'IExternalApplication' in explicit interface declaration is not an interface	ReadonlySharedParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParameterApplicaton.cs	36	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	ReadonlySharedParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParameterApplicaton.cs	36	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	ReadonlySharedParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParameterApplicaton.cs	41	Active
Error	CS0246	The type or namespace name 'IExternalApplication' could not be found (are you missing a using directive or an assembly reference?)	ReadonlySharedParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParameterApplicaton.cs	41	Active
Error	CS0538	'IExternalApplication' in explicit interface declaration is not an interface	ReadonlySharedParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParameterApplicaton.cs	41	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	ReadonlySharedParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParameterApplicaton.cs	41	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ReadonlySharedParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParametersCommands.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ReadonlySharedParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParametersCommands.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ReadonlySharedParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParametersCommands.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ReadonlySharedParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParametersCommands.cs	35	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	ReadonlySharedParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParametersCommands.cs	35	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	ReadonlySharedParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParametersCommands.cs	36	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	ReadonlySharedParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParametersCommands.cs	40	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	ReadonlySharedParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParametersCommands.cs	40	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ReadonlySharedParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParametersCommands.cs	40	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ReadonlySharedParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParametersCommands.cs	52	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	ReadonlySharedParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParametersCommands.cs	52	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	ReadonlySharedParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParametersCommands.cs	53	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	ReadonlySharedParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParametersCommands.cs	57	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	ReadonlySharedParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParametersCommands.cs	57	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ReadonlySharedParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParametersCommands.cs	57	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	ReadonlySharedParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParametersCommands.cs	72	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	ReadonlySharedParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParametersCommands.cs	77	Active
Error	CS0246	The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)	ReadonlySharedParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParametersCommands.cs	82	Active
Error	CS0246	The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)	ReadonlySharedParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParametersCommands.cs	88	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	ReadonlySharedParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParametersCommands.cs	93	Active
Error	CS0246	The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)	ReadonlySharedParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParametersCommands.cs	93	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ReadonlySharedParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParametersCommands.cs	122	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	ReadonlySharedParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParametersCommands.cs	122	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	ReadonlySharedParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParametersCommands.cs	123	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	ReadonlySharedParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParametersCommands.cs	127	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	ReadonlySharedParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParametersCommands.cs	127	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ReadonlySharedParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParametersCommands.cs	127	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ReadonlySharedParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParametersCommands.cs	139	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	ReadonlySharedParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParametersCommands.cs	139	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	ReadonlySharedParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParametersCommands.cs	140	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	ReadonlySharedParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParametersCommands.cs	144	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	ReadonlySharedParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParametersCommands.cs	144	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ReadonlySharedParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParametersCommands.cs	144	Active
Error	CS0246	The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)	ReadonlySharedParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParametersCommands.cs	158	Active
Error	CS0246	The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)	ReadonlySharedParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParametersCommands.cs	163	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	ReadonlySharedParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParametersCommands.cs	170	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	ReadonlySharedParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParametersCommands.cs	175	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	ReadonlySharedParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParametersCommands.cs	181	Active
Error	CS0246	The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)	ReadonlySharedParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParametersCommands.cs	181	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ReadonlySharedParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParametersCommands.cs	205	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	ReadonlySharedParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParametersCommands.cs	205	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	ReadonlySharedParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParametersCommands.cs	206	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	ReadonlySharedParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParametersCommands.cs	210	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	ReadonlySharedParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParametersCommands.cs	210	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ReadonlySharedParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParametersCommands.cs	210	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	ReadonlySharedParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParametersCommands.cs	257	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ReadonlySharedParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\SharedParameterBindingManager.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ReadonlySharedParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\SharedParameterBindingManager.cs	30	Active
Error	CS0246	The type or namespace name 'ParameterType' could not be found (are you missing a using directive or an assembly reference?)	ReadonlySharedParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\SharedParameterBindingManager.cs	37	Active
Error	CS0246	The type or namespace name 'Definition' could not be found (are you missing a using directive or an assembly reference?)	ReadonlySharedParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\SharedParameterBindingManager.cs	42	Active
Error	CS0246	The type or namespace name 'BuiltInParameterGroup' could not be found (are you missing a using directive or an assembly reference?)	ReadonlySharedParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\SharedParameterBindingManager.cs	43	Active
Error	CS0246	The type or namespace name 'BuiltInCategory' could not be found (are you missing a using directive or an assembly reference?)	ReadonlySharedParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\SharedParameterBindingManager.cs	57	Active
Error	CS0246	The type or namespace name 'ExternalDefinitionCreationOptions' could not be found (are you missing a using directive or an assembly reference?)	ReadonlySharedParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\SharedParameterBindingManager.cs	59	Active
Error	CS0246	The type or namespace name 'BuiltInCategory' could not be found (are you missing a using directive or an assembly reference?)	ReadonlySharedParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\SharedParameterBindingManager.cs	68	Active
Error	CS0246	The type or namespace name 'CategorySet' could not be found (are you missing a using directive or an assembly reference?)	ReadonlySharedParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\SharedParameterBindingManager.cs	73	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	ReadonlySharedParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\SharedParameterBindingManager.cs	73	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	ReadonlySharedParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\SharedParameterBindingManager.cs	87	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\BeamFramReinMaker.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\BeamFramReinMaker.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\BeamFramReinMaker.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\BeamFramReinMaker.cs	32	Active
Error	CS0246	The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\BeamFramReinMaker.cs	47	Active
Error	CS0246	The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\BeamFramReinMaker.cs	48	Active
Error	CS0246	The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\BeamFramReinMaker.cs	49	Active
Error	CS0246	The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\BeamFramReinMaker.cs	50	Active
Error	CS0246	The type or namespace name 'RebarHookType' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\BeamFramReinMaker.cs	52	Active
Error	CS0246	The type or namespace name 'RebarHookType' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\BeamFramReinMaker.cs	53	Active
Error	CS0246	The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\BeamFramReinMaker.cs	64	Active
Error	CS0246	The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\BeamFramReinMaker.cs	79	Active
Error	CS0246	The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\BeamFramReinMaker.cs	94	Active
Error	CS0246	The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\BeamFramReinMaker.cs	109	Active
Error	CS0246	The type or namespace name 'RebarHookType' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\BeamFramReinMaker.cs	162	Active
Error	CS0246	The type or namespace name 'RebarHookType' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\BeamFramReinMaker.cs	177	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\BeamFramReinMaker.cs	197	Active
Error	CS0246	The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\BeamFramReinMaker.cs	197	Active
Error	CS0246	The type or namespace name 'RebarContainer' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\BeamFramReinMaker.cs	266	Active
Error	CS0246	The type or namespace name 'RebarContainer' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\BeamFramReinMaker.cs	280	Active
Error	CS0246	The type or namespace name 'RebarContainerItem' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\BeamFramReinMaker.cs	302	Active
Error	CS0246	The type or namespace name 'RebarContainer' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\BeamFramReinMaker.cs	302	Active
Error	CS0246	The type or namespace name 'RebarHookOrientation' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\BeamFramReinMaker.cs	335	Active
Error	CS0246	The type or namespace name 'RebarContainer' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\BeamFramReinMaker.cs	366	Active
Error	CS0246	The type or namespace name 'RebarContainerItem' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\BeamFramReinMaker.cs	387	Active
Error	CS0246	The type or namespace name 'RebarContainer' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\BeamFramReinMaker.cs	387	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\BeamFramReinMakerForm.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\BeamFramReinMakerForm.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\BeamFramReinMakerForm.cs	34	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\BeamGeometrySupport.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\BeamGeometrySupport.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\BeamGeometrySupport.cs	30	Active
Error	CS0246	The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\BeamGeometrySupport.cs	50	Active
Error	CS0246	The type or namespace name 'Options' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\BeamGeometrySupport.cs	50	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\BeamGeometrySupport.cs	230	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ColumnFramReinMaker.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ColumnFramReinMaker.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ColumnFramReinMaker.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ColumnFramReinMaker.cs	32	Active
Error	CS0246	The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ColumnFramReinMaker.cs	45	Active
Error	CS0246	The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ColumnFramReinMaker.cs	46	Active
Error	CS0246	The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ColumnFramReinMaker.cs	47	Active
Error	CS0246	The type or namespace name 'RebarHookType' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ColumnFramReinMaker.cs	48	Active
Error	CS0246	The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ColumnFramReinMaker.cs	61	Active
Error	CS0246	The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ColumnFramReinMaker.cs	76	Active
Error	CS0246	The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ColumnFramReinMaker.cs	91	Active
Error	CS0246	The type or namespace name 'RebarHookType' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ColumnFramReinMaker.cs	163	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ColumnFramReinMaker.cs	183	Active
Error	CS0246	The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ColumnFramReinMaker.cs	183	Active
Error	CS0246	The type or namespace name 'RebarContainer' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ColumnFramReinMaker.cs	250	Active
Error	CS0246	The type or namespace name 'RebarContainerItem' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ColumnFramReinMaker.cs	271	Active
Error	CS0246	The type or namespace name 'RebarContainer' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ColumnFramReinMaker.cs	271	Active
Error	CS0246	The type or namespace name 'RebarContainerItem' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ColumnFramReinMaker.cs	300	Active
Error	CS0246	The type or namespace name 'RebarContainer' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ColumnFramReinMaker.cs	300	Active
Error	CS0246	The type or namespace name 'RebarContainer' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ColumnFramReinMaker.cs	339	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ColumnFramReinMakerForm.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ColumnFramReinMakerForm.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ColumnFramReinMakerForm.cs	34	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ColumnGeometrySupport.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ColumnGeometrySupport.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ColumnGeometrySupport.cs	31	Active
Error	CS0246	The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ColumnGeometrySupport.cs	51	Active
Error	CS0246	The type or namespace name 'Options' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ColumnGeometrySupport.cs	51	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\Command.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\Command.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\Command.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\Command.cs	38	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\Command.cs	38	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\Command.cs	39	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\Command.cs	39	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\Command.cs	40	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\Command.cs	40	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\Command.cs	41	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\Command.cs	59	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\Command.cs	59	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\Command.cs	59	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\FrameReinMakerFactory.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\FrameReinMakerFactory.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\FrameReinMakerFactory.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\FrameReinMakerFactory.cs	32	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\FrameReinMakerFactory.cs	42	Active
Error	CS0246	The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\FrameReinMakerFactory.cs	43	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\FrameReinMakerFactory.cs	49	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\FramReinMaker.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\FramReinMaker.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\FramReinMaker.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\FramReinMaker.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\FramReinMaker.cs	60	Active
Error	CS0246	The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\FramReinMaker.cs	65	Active
Error	CS0246	The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\FramReinMaker.cs	70	Active
Error	CS0246	The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\FramReinMaker.cs	71	Active
Error	CS0246	The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\FramReinMaker.cs	72	Active
Error	CS0246	The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\FramReinMaker.cs	74	Active
Error	CS0246	The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\FramReinMaker.cs	75	Active
Error	CS0246	The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\FramReinMaker.cs	76	Active
Error	CS0246	The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\FramReinMaker.cs	77	Active
Error	CS0246	The type or namespace name 'RebarHookType' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\FramReinMaker.cs	82	Active
Error	CS0246	The type or namespace name 'RebarHookType' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\FramReinMaker.cs	83	Active
Error	CS0246	The type or namespace name 'RebarHookType' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\FramReinMaker.cs	84	Active
Error	CS0246	The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\FramReinMaker.cs	89	Active
Error	CS0246	The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\FramReinMaker.cs	97	Active
Error	CS0246	The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\FramReinMaker.cs	105	Active
Error	CS0246	The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\FramReinMaker.cs	113	Active
Error	CS0246	The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\FramReinMaker.cs	121	Active
Error	CS0246	The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\FramReinMaker.cs	129	Active
Error	CS0246	The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\FramReinMaker.cs	137	Active
Error	CS0246	The type or namespace name 'RebarHookType' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\FramReinMaker.cs	148	Active
Error	CS0246	The type or namespace name 'RebarHookType' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\FramReinMaker.cs	156	Active
Error	CS0246	The type or namespace name 'RebarHookType' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\FramReinMaker.cs	164	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\FramReinMaker.cs	233	Active
Error	CS0246	The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\FramReinMaker.cs	233	Active
Error	CS0246	The type or namespace name 'RebarContainerItem' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\FramReinMaker.cs	263	Active
Error	CS0246	The type or namespace name 'RebarContainer' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\FramReinMaker.cs	263	Active
Error	CS0246	The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\FramReinMaker.cs	263	Active
Error	CS0246	The type or namespace name 'RebarHookType' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\FramReinMaker.cs	263	Active
Error	CS0246	The type or namespace name 'RebarHookType' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\FramReinMaker.cs	263	Active
Error	CS0246	The type or namespace name 'RebarHookOrientation' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\FramReinMaker.cs	264	Active
Error	CS0246	The type or namespace name 'RebarHookOrientation' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\FramReinMaker.cs	264	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\FramReinMaker.cs	284	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\FramReinMaker.cs	302	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomData.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomData.cs	40	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomData.cs	41	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomData.cs	48	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomData.cs	63	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomData.cs	112	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomData.cs	112	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomData.cs	260	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomData.cs	262	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomData.cs	262	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomData.cs	262	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeometrySupport.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeometrySupport.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeometrySupport.cs	34	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeometrySupport.cs	35	Active
Error	CS0246	The type or namespace name 'Solid' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeometrySupport.cs	46	Active
Error	CS0246	The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeometrySupport.cs	51	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeometrySupport.cs	56	Active
Error	CS0246	The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeometrySupport.cs	61	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeometrySupport.cs	66	Active
Error	CS0246	The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeometrySupport.cs	71	Active
Error	CS0246	The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeometrySupport.cs	78	Active
Error	CS0246	The type or namespace name 'Options' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeometrySupport.cs	78	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeometrySupport.cs	164	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeometrySupport.cs	164	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeometrySupport.cs	186	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeometrySupport.cs	186	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeometrySupport.cs	222	Active
Error	CS0246	The type or namespace name 'Solid' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeometrySupport.cs	253	Active
Error	CS0246	The type or namespace name 'Face' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeometrySupport.cs	281	Active
Error	CS0246	The type or namespace name 'Solid' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeometrySupport.cs	281	Active
Error	CS0246	The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeometrySupport.cs	345	Active
Error	CS0246	The type or namespace name 'EdgeArray' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeometrySupport.cs	345	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomUtil.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomUtil.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomUtil.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomUtil.cs	34	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomUtil.cs	35	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomUtil.cs	65	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomUtil.cs	65	Active
Error	CS0246	The type or namespace name 'Face' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomUtil.cs	87	Active
Error	CS0246	The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomUtil.cs	87	Active
Error	CS0246	The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomUtil.cs	88	Active
Error	CS0246	The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomUtil.cs	88	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomUtil.cs	141	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomUtil.cs	141	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomUtil.cs	158	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomUtil.cs	158	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomUtil.cs	175	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomUtil.cs	175	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomUtil.cs	175	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomUtil.cs	201	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomUtil.cs	201	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomUtil.cs	218	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomUtil.cs	232	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomUtil.cs	232	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomUtil.cs	232	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomUtil.cs	247	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomUtil.cs	247	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomUtil.cs	247	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomUtil.cs	262	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomUtil.cs	262	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomUtil.cs	277	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomUtil.cs	277	Active
Error	CS0246	The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomUtil.cs	277	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomUtil.cs	305	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomUtil.cs	305	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomUtil.cs	305	Active
Error	CS0246	The type or namespace name 'RebarHookOrientation' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomUtil.cs	319	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomUtil.cs	319	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomUtil.cs	319	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomUtil.cs	319	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomUtil.cs	347	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomUtil.cs	366	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomUtil.cs	366	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ParameterUtil.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ParameterUtil.cs	30	Active
Error	CS0246	The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ParameterUtil.cs	46	Active
Error	CS0246	The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ParameterUtil.cs	80	Active
Error	CS0246	The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ParameterUtil.cs	111	Active
Error	CS0246	The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ParameterUtil.cs	142	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ParameterUtil.cs	142	Active
Error	CS0246	The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ParameterUtil.cs	173	Active
Error	CS0246	The type or namespace name 'BuiltInParameter' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ParameterUtil.cs	173	Active
Error	CS0246	The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ParameterUtil.cs	203	Active
Error	CS0246	The type or namespace name 'BuiltInParameter' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ParameterUtil.cs	203	Active
Error	CS0246	The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ParameterUtil.cs	232	Active
Error	CS0246	The type or namespace name 'BuiltInParameter' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ParameterUtil.cs	232	Active
Error	CS0246	The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ParameterUtil.cs	261	Active
Error	CS0246	The type or namespace name 'BuiltInParameter' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ParameterUtil.cs	262	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ParameterUtil.cs	262	Active
Error	CS0246	The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ParameterUtil.cs	289	Active
Error	CS0246	The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ParameterUtil.cs	308	Active
Error	CS0246	The type or namespace name 'ParameterSet' could not be found (are you missing a using directive or an assembly reference?)	RebarContainerAnyShapeType	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ParameterUtil.cs	308	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarFreeForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\AddSharedParams.cs	1	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarFreeForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\AddSharedParams.cs	2	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarFreeForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\AddSharedParams.cs	17	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	RebarFreeForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\AddSharedParams.cs	17	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarFreeForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\AddSharedParams.cs	18	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	RebarFreeForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\AddSharedParams.cs	18	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	RebarFreeForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\AddSharedParams.cs	19	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	RebarFreeForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\AddSharedParams.cs	34	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	RebarFreeForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\AddSharedParams.cs	34	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	RebarFreeForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\AddSharedParams.cs	34	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	RebarFreeForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\AddSharedParams.cs	62	Active
Error	CS0246	The type or namespace name 'ParameterType' could not be found (are you missing a using directive or an assembly reference?)	RebarFreeForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\AddSharedParams.cs	62	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	RebarFreeForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\AddSharedParams.cs	121	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarFreeForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\Application.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarFreeForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\Application.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarFreeForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\Application.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarFreeForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\Application.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarFreeForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\Application.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarFreeForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\Application.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarFreeForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\Application.cs	34	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarFreeForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\Application.cs	41	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	RebarFreeForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\Application.cs	41	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarFreeForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\Application.cs	42	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	RebarFreeForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\Application.cs	42	Active
Error	CS0246	The type or namespace name 'IExternalApplication' could not be found (are you missing a using directive or an assembly reference?)	RebarFreeForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\Application.cs	43	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	RebarFreeForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\Application.cs	57	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	RebarFreeForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\Application.cs	57	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	RebarFreeForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\Application.cs	68	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	RebarFreeForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\Application.cs	68	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarFreeForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\Command.cs	22	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarFreeForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\Command.cs	23	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarFreeForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\Command.cs	24	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarFreeForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\Command.cs	25	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarFreeForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\Command.cs	34	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	RebarFreeForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\Command.cs	34	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarFreeForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\Command.cs	35	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	RebarFreeForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\Command.cs	35	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	RebarFreeForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\Command.cs	36	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	RebarFreeForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\Command.cs	54	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	RebarFreeForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\Command.cs	54	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	RebarFreeForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\Command.cs	55	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarFreeForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\CurveElementRegenUpdater.cs	2	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarFreeForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\CurveElementRegenUpdater.cs	3	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarFreeForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\CurveElementRegenUpdater.cs	4	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarFreeForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\CurveElementRegenUpdater.cs	8	Active
Error	CS0246	The type or namespace name 'IUpdater' could not be found (are you missing a using directive or an assembly reference?)	RebarFreeForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\CurveElementRegenUpdater.cs	16	Active
Error	CS0246	The type or namespace name 'AddInId' could not be found (are you missing a using directive or an assembly reference?)	RebarFreeForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\CurveElementRegenUpdater.cs	18	Active
Error	CS0246	The type or namespace name 'UpdaterId' could not be found (are you missing a using directive or an assembly reference?)	RebarFreeForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\CurveElementRegenUpdater.cs	19	Active
Error	CS0246	The type or namespace name 'AddInId' could not be found (are you missing a using directive or an assembly reference?)	RebarFreeForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\CurveElementRegenUpdater.cs	21	Active
Error	CS0246	The type or namespace name 'UpdaterData' could not be found (are you missing a using directive or an assembly reference?)	RebarFreeForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\CurveElementRegenUpdater.cs	26	Active
Error	CS0246	The type or namespace name 'ChangePriority' could not be found (are you missing a using directive or an assembly reference?)	RebarFreeForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\CurveElementRegenUpdater.cs	69	Active
Error	CS0246	The type or namespace name 'UpdaterId' could not be found (are you missing a using directive or an assembly reference?)	RebarFreeForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\CurveElementRegenUpdater.cs	74	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarFreeForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\RebarUpdateServer.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarFreeForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\RebarUpdateServer.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarFreeForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\RebarUpdateServer.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarFreeForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\RebarUpdateServer.cs	31	Active
Error	CS0246	The type or namespace name 'Face' could not be found (are you missing a using directive or an assembly reference?)	RebarFreeForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\RebarUpdateServer.cs	47	Active
Error	CS0246	The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)	RebarFreeForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\RebarUpdateServer.cs	49	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RebarFreeForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\RebarUpdateServer.cs	70	Active
Error	CS0246	The type or namespace name 'ExternalServiceId' could not be found (are you missing a using directive or an assembly reference?)	RebarFreeForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\RebarUpdateServer.cs	92	Active
Error	CS0246	The type or namespace name 'RebarHandlesData' could not be found (are you missing a using directive or an assembly reference?)	RebarFreeForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\RebarUpdateServer.cs	127	Active
Error	CS0246	The type or namespace name 'RebarHandlePositionData' could not be found (are you missing a using directive or an assembly reference?)	RebarFreeForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\RebarUpdateServer.cs	144	Active
Error	CS0246	The type or namespace name 'RebarHandleNameData' could not be found (are you missing a using directive or an assembly reference?)	RebarFreeForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\RebarUpdateServer.cs	164	Active
Error	CS0246	The type or namespace name 'RebarCurvesData' could not be found (are you missing a using directive or an assembly reference?)	RebarFreeForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\RebarUpdateServer.cs	197	Active
Error	CS0246	The type or namespace name 'RebarTrimExtendData' could not be found (are you missing a using directive or an assembly reference?)	RebarFreeForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\RebarUpdateServer.cs	346	Active
Error	CS0246	The type or namespace name 'Rebar' could not be found (are you missing a using directive or an assembly reference?)	RebarFreeForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\RebarUpdateServer.cs	481	Active
Error	CS0246	The type or namespace name 'RebarUpdateCurvesData' could not be found (are you missing a using directive or an assembly reference?)	RebarFreeForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\RebarUpdateServer.cs	481	Active
Error	CS0246	The type or namespace name 'CurveElement' could not be found (are you missing a using directive or an assembly reference?)	RebarFreeForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\RebarUpdateServer.cs	487	Active
Error	CS0246	The type or namespace name 'Rebar' could not be found (are you missing a using directive or an assembly reference?)	RebarFreeForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\RebarUpdateServer.cs	487	Active
Error	CS0246	The type or namespace name 'RebarUpdateCurvesData' could not be found (are you missing a using directive or an assembly reference?)	RebarFreeForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\RebarUpdateServer.cs	487	Active
Error	CS0246	The type or namespace name 'RebarUpdateCurvesData' could not be found (are you missing a using directive or an assembly reference?)	RebarFreeForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\RebarUpdateServer.cs	501	Active
Error	CS0246	The type or namespace name 'RebarConstraint' could not be found (are you missing a using directive or an assembly reference?)	RebarFreeForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\RebarUpdateServer.cs	501	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	RebarFreeForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\RebarUpdateServer.cs	541	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	RebarFreeForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\RebarUpdateServer.cs	598	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	RebarFreeForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\RebarUpdateServer.cs	598	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	RebarFreeForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\RebarUpdateServer.cs	622	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	RebarFreeForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\RebarUpdateServer.cs	622	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	RebarFreeForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\RebarUpdateServer.cs	651	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	RebarFreeForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\RebarUpdateServer.cs	651	Active
Error	CS0246	The type or namespace name 'RebarLayoutRule' could not be found (are you missing a using directive or an assembly reference?)	RebarFreeForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\RebarUpdateServer.cs	651	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	RebarFreeForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\RebarUpdateServer.cs	651	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	RebarFreeForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\RebarUpdateServer.cs	651	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	RebarFreeForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\RebarUpdateServer.cs	686	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	RebarFreeForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\RebarUpdateServer.cs	686	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	RebarFreeForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\RebarUpdateServer.cs	703	Active
Error	CS0246	The type or namespace name 'GeometryElement' could not be found (are you missing a using directive or an assembly reference?)	RebarFreeForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\RebarUpdateServer.cs	728	Active
Error	CS0246	The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)	RebarFreeForm	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\RebarUpdateServer.cs	728	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ReferencePlane	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\Command.cs	24	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ReferencePlane	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\Command.cs	25	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ReferencePlane	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\Command.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ReferencePlane	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\Command.cs	33	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	ReferencePlane	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\Command.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ReferencePlane	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\Command.cs	34	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	ReferencePlane	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\Command.cs	34	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ReferencePlane	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\Command.cs	35	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	ReferencePlane	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\Command.cs	35	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	ReferencePlane	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\Command.cs	36	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ReferencePlane	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\Command.cs	54	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	ReferencePlane	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\Command.cs	54	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	ReferencePlane	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\Command.cs	56	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ReferencePlane	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\GeoHelper.cs	25	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ReferencePlane	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\GeoHelper.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ReferencePlane	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\GeoHelper.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ReferencePlane	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\GeoHelper.cs	29	Active
Error	CS0246	The type or namespace name 'Face' could not be found (are you missing a using directive or an assembly reference?)	ReferencePlane	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\GeoHelper.cs	46	Active
Error	CS0246	The type or namespace name 'FaceArray' could not be found (are you missing a using directive or an assembly reference?)	ReferencePlane	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\GeoHelper.cs	46	Active
Error	CS0246	The type or namespace name 'Mesh' could not be found (are you missing a using directive or an assembly reference?)	ReferencePlane	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\GeoHelper.cs	91	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ReferencePlane	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\GeoHelper.cs	91	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ReferencePlane	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\GeoHelper.cs	91	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ReferencePlane	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\GeoHelper.cs	91	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ReferencePlane	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\GeoHelper.cs	105	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ReferencePlane	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\GeoHelper.cs	105	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ReferencePlane	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\GeoHelper.cs	129	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ReferencePlane	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\GeoHelper.cs	129	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ReferencePlane	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\GeoHelper.cs	129	Active
Error	CS0246	The type or namespace name 'Face' could not be found (are you missing a using directive or an assembly reference?)	ReferencePlane	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\GeoHelper.cs	140	Active
Error	CS0246	The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)	ReferencePlane	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\GeoHelper.cs	161	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ReferencePlane	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\GeoHelper.cs	190	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ReferencePlane	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\GeoHelper.cs	190	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ReferencePlane	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\ReferencePlaneMgr.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ReferencePlane	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\ReferencePlaneMgr.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ReferencePlane	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\ReferencePlaneMgr.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ReferencePlane	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\ReferencePlaneMgr.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ReferencePlane	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\ReferencePlaneMgr.cs	32	Active
Error	CS0246	The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)	ReferencePlane	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\ReferencePlaneMgr.cs	41	Active
Error	CS0246	The type or namespace name 'Options' could not be found (are you missing a using directive or an assembly reference?)	ReferencePlane	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\ReferencePlaneMgr.cs	42	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	ReferencePlane	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\ReferencePlaneMgr.cs	68	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ReferencePlane	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\ReferencePlaneMgr.cs	160	Active
Error	CS0246	The type or namespace name 'Wall' could not be found (are you missing a using directive or an assembly reference?)	ReferencePlane	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\ReferencePlaneMgr.cs	237	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ReferencePlane	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\ReferencePlaneMgr.cs	237	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ReferencePlane	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\ReferencePlaneMgr.cs	237	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ReferencePlane	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\ReferencePlaneMgr.cs	237	Active
Error	CS0246	The type or namespace name 'Floor' could not be found (are you missing a using directive or an assembly reference?)	ReferencePlane	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\ReferencePlaneMgr.cs	296	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ReferencePlane	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\ReferencePlaneMgr.cs	296	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ReferencePlane	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\ReferencePlaneMgr.cs	296	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ReferencePlane	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\ReferencePlaneMgr.cs	296	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\BeamFramReinMaker.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\BeamFramReinMaker.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\BeamFramReinMaker.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\BeamFramReinMaker.cs	32	Active
Error	CS0246	The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\BeamFramReinMaker.cs	47	Active
Error	CS0246	The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\BeamFramReinMaker.cs	48	Active
Error	CS0246	The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\BeamFramReinMaker.cs	49	Active
Error	CS0246	The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\BeamFramReinMaker.cs	50	Active
Error	CS0246	The type or namespace name 'RebarHookType' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\BeamFramReinMaker.cs	52	Active
Error	CS0246	The type or namespace name 'RebarHookType' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\BeamFramReinMaker.cs	53	Active
Error	CS0246	The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\BeamFramReinMaker.cs	64	Active
Error	CS0246	The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\BeamFramReinMaker.cs	79	Active
Error	CS0246	The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\BeamFramReinMaker.cs	94	Active
Error	CS0246	The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\BeamFramReinMaker.cs	109	Active
Error	CS0246	The type or namespace name 'RebarHookType' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\BeamFramReinMaker.cs	162	Active
Error	CS0246	The type or namespace name 'RebarHookType' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\BeamFramReinMaker.cs	177	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\BeamFramReinMaker.cs	197	Active
Error	CS0246	The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\BeamFramReinMaker.cs	197	Active
Error	CS0246	The type or namespace name 'Rebar' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\BeamFramReinMaker.cs	299	Active
Error	CS0246	The type or namespace name 'RebarHookOrientation' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\BeamFramReinMaker.cs	333	Active
Error	CS0246	The type or namespace name 'Rebar' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\BeamFramReinMaker.cs	385	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\BeamFramReinMakerForm.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\BeamFramReinMakerForm.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\BeamFramReinMakerForm.cs	34	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\BeamGeometrySupport.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\BeamGeometrySupport.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\BeamGeometrySupport.cs	30	Active
Error	CS0246	The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\BeamGeometrySupport.cs	50	Active
Error	CS0246	The type or namespace name 'Options' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\BeamGeometrySupport.cs	50	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\BeamGeometrySupport.cs	230	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\ColumnFramReinMaker.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\ColumnFramReinMaker.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\ColumnFramReinMaker.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\ColumnFramReinMaker.cs	32	Active
Error	CS0246	The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\ColumnFramReinMaker.cs	45	Active
Error	CS0246	The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\ColumnFramReinMaker.cs	46	Active
Error	CS0246	The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\ColumnFramReinMaker.cs	47	Active
Error	CS0246	The type or namespace name 'RebarHookType' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\ColumnFramReinMaker.cs	48	Active
Error	CS0246	The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\ColumnFramReinMaker.cs	61	Active
Error	CS0246	The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\ColumnFramReinMaker.cs	76	Active
Error	CS0246	The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\ColumnFramReinMaker.cs	91	Active
Error	CS0246	The type or namespace name 'RebarHookType' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\ColumnFramReinMaker.cs	163	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\ColumnFramReinMaker.cs	183	Active
Error	CS0246	The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\ColumnFramReinMaker.cs	183	Active
Error	CS0246	The type or namespace name 'Rebar' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\ColumnFramReinMaker.cs	266	Active
Error	CS0246	The type or namespace name 'Rebar' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\ColumnFramReinMaker.cs	297	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\ColumnFramReinMakerForm.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\ColumnFramReinMakerForm.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\ColumnFramReinMakerForm.cs	34	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\ColumnGeometrySupport.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\ColumnGeometrySupport.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\ColumnGeometrySupport.cs	31	Active
Error	CS0246	The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\ColumnGeometrySupport.cs	51	Active
Error	CS0246	The type or namespace name 'Options' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\ColumnGeometrySupport.cs	51	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\Command.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\Command.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\Command.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\Command.cs	38	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\Command.cs	38	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\Command.cs	39	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\Command.cs	39	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\Command.cs	40	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\Command.cs	40	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\Command.cs	41	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\Command.cs	59	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\Command.cs	59	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\Command.cs	60	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\FrameReinMakerFactory.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\FrameReinMakerFactory.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\FrameReinMakerFactory.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\FrameReinMakerFactory.cs	32	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\FrameReinMakerFactory.cs	42	Active
Error	CS0246	The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\FrameReinMakerFactory.cs	43	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\FrameReinMakerFactory.cs	49	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\FramReinMaker.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\FramReinMaker.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\FramReinMaker.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\FramReinMaker.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\FramReinMaker.cs	60	Active
Error	CS0246	The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\FramReinMaker.cs	65	Active
Error	CS0246	The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\FramReinMaker.cs	70	Active
Error	CS0246	The type or namespace name 'RebarHookType' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\FramReinMaker.cs	75	Active
Error	CS0246	The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\FramReinMaker.cs	80	Active
Error	CS0246	The type or namespace name 'RebarHookType' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\FramReinMaker.cs	91	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\FramReinMaker.cs	160	Active
Error	CS0246	The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\FramReinMaker.cs	160	Active
Error	CS0246	The type or namespace name 'Rebar' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\FramReinMaker.cs	186	Active
Error	CS0246	The type or namespace name 'Rebar' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\FramReinMaker.cs	208	Active
Error	CS0246	The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\FramReinMaker.cs	208	Active
Error	CS0246	The type or namespace name 'RebarHookType' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\FramReinMaker.cs	208	Active
Error	CS0246	The type or namespace name 'RebarHookType' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\FramReinMaker.cs	209	Active
Error	CS0246	The type or namespace name 'RebarHookOrientation' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\FramReinMaker.cs	210	Active
Error	CS0246	The type or namespace name 'RebarHookOrientation' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\FramReinMaker.cs	210	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\FramReinMaker.cs	235	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\FramReinMaker.cs	251	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomData.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomData.cs	40	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomData.cs	41	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomData.cs	48	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomData.cs	63	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomData.cs	112	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomData.cs	112	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomData.cs	260	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomData.cs	262	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomData.cs	262	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomData.cs	262	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeometrySupport.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeometrySupport.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeometrySupport.cs	34	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeometrySupport.cs	35	Active
Error	CS0246	The type or namespace name 'Solid' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeometrySupport.cs	46	Active
Error	CS0246	The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeometrySupport.cs	51	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeometrySupport.cs	56	Active
Error	CS0246	The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeometrySupport.cs	61	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeometrySupport.cs	66	Active
Error	CS0246	The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeometrySupport.cs	71	Active
Error	CS0246	The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeometrySupport.cs	78	Active
Error	CS0246	The type or namespace name 'Options' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeometrySupport.cs	78	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeometrySupport.cs	164	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeometrySupport.cs	164	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeometrySupport.cs	186	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeometrySupport.cs	186	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeometrySupport.cs	222	Active
Error	CS0246	The type or namespace name 'Solid' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeometrySupport.cs	253	Active
Error	CS0246	The type or namespace name 'Face' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeometrySupport.cs	281	Active
Error	CS0246	The type or namespace name 'Solid' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeometrySupport.cs	281	Active
Error	CS0246	The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeometrySupport.cs	345	Active
Error	CS0246	The type or namespace name 'EdgeArray' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeometrySupport.cs	345	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomUtil.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomUtil.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomUtil.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomUtil.cs	34	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomUtil.cs	35	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomUtil.cs	65	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomUtil.cs	65	Active
Error	CS0246	The type or namespace name 'Face' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomUtil.cs	87	Active
Error	CS0246	The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomUtil.cs	87	Active
Error	CS0246	The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomUtil.cs	88	Active
Error	CS0246	The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomUtil.cs	88	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomUtil.cs	141	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomUtil.cs	141	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomUtil.cs	158	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomUtil.cs	158	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomUtil.cs	175	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomUtil.cs	175	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomUtil.cs	175	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomUtil.cs	201	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomUtil.cs	201	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomUtil.cs	218	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomUtil.cs	232	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomUtil.cs	232	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomUtil.cs	232	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomUtil.cs	247	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomUtil.cs	247	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomUtil.cs	247	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomUtil.cs	262	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomUtil.cs	262	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomUtil.cs	277	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomUtil.cs	277	Active
Error	CS0246	The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomUtil.cs	277	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomUtil.cs	305	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomUtil.cs	305	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomUtil.cs	305	Active
Error	CS0246	The type or namespace name 'RebarHookOrientation' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomUtil.cs	319	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomUtil.cs	319	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomUtil.cs	319	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomUtil.cs	319	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomUtil.cs	347	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomUtil.cs	366	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomUtil.cs	366	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\ParameterUtil.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\ParameterUtil.cs	30	Active
Error	CS0246	The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\ParameterUtil.cs	46	Active
Error	CS0246	The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\ParameterUtil.cs	80	Active
Error	CS0246	The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\ParameterUtil.cs	111	Active
Error	CS0246	The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\ParameterUtil.cs	142	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\ParameterUtil.cs	142	Active
Error	CS0246	The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\ParameterUtil.cs	173	Active
Error	CS0246	The type or namespace name 'BuiltInParameter' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\ParameterUtil.cs	173	Active
Error	CS0246	The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\ParameterUtil.cs	203	Active
Error	CS0246	The type or namespace name 'BuiltInParameter' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\ParameterUtil.cs	203	Active
Error	CS0246	The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\ParameterUtil.cs	232	Active
Error	CS0246	The type or namespace name 'BuiltInParameter' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\ParameterUtil.cs	232	Active
Error	CS0246	The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\ParameterUtil.cs	261	Active
Error	CS0246	The type or namespace name 'BuiltInParameter' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\ParameterUtil.cs	262	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\ParameterUtil.cs	262	Active
Error	CS0246	The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\ParameterUtil.cs	289	Active
Error	CS0246	The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\ParameterUtil.cs	308	Active
Error	CS0246	The type or namespace name 'ParameterSet' could not be found (are you missing a using directive or an assembly reference?)	Reinforcement	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\ParameterUtil.cs	308	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RevitAddInUtilitySample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalCommand\CS\RevitAddInUtilitySample\RevitAddInUtilityForm.cs	30	Active
Error	BC40056	Namespace or type specified in the Imports 'Autodesk.Revit' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.	RevitCommands	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\LibraryPath.vb	27	Active
Error	BC40056	Namespace or type specified in the Imports 'Autodesk.Revit.DB' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.	RevitCommands	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\LibraryPath.vb	28	Active
Error	BC30002	Type 'Autodesk.Revit.Attributes.Transaction' is not defined.	RevitCommands	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\LibraryPath.vb	38	Active
Error	BC30451	'Autodesk' is not declared. It may be inaccessible due to its protection level.	RevitCommands	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\LibraryPath.vb	38	Active
Error	BC30002	Type 'Autodesk.Revit.Attributes.Regeneration' is not defined.	RevitCommands	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\LibraryPath.vb	39	Active
Error	BC30451	'Autodesk' is not declared. It may be inaccessible due to its protection level.	RevitCommands	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\LibraryPath.vb	39	Active
Error	BC30002	Type 'Autodesk.Revit.Attributes.Journaling' is not defined.	RevitCommands	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\LibraryPath.vb	40	Active
Error	BC30451	'Autodesk' is not declared. It may be inaccessible due to its protection level.	RevitCommands	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\LibraryPath.vb	40	Active
Error	BC30002	Type 'Autodesk.Revit.UI.IExternalCommand' is not defined.	RevitCommands	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\LibraryPath.vb	43	Active
Error	BC30002	Type 'Autodesk.Revit.UI.ExternalCommandData' is not defined.	RevitCommands	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\LibraryPath.vb	61	Active
Error	BC30002	Type 'Autodesk.Revit.DB.ElementSet' is not defined.	RevitCommands	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\LibraryPath.vb	62	Active
Error	BC30002	Type 'Autodesk.Revit.UI.Result' is not defined.	RevitCommands	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\LibraryPath.vb	63	Active
Error	BC30002	Type 'Autodesk.Revit.UI.IExternalCommand' is not defined.	RevitCommands	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\LibraryPath.vb	63	Active
Error	BC40056	Namespace or type specified in the Imports 'Autodesk.Revit' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.	RevitCommands	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\LoadFamily.vb	34	Active
Error	BC40056	Namespace or type specified in the Imports 'Autodesk.Revit.DB' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.	RevitCommands	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\LoadFamily.vb	35	Active
Error	BC40056	Namespace or type specified in the Imports 'Autodesk.Revit.UI' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.	RevitCommands	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\LoadFamily.vb	36	Active
Error	BC30002	Type 'Autodesk.Revit.Attributes.Transaction' is not defined.	RevitCommands	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\LoadFamily.vb	43	Active
Error	BC30451	'Autodesk' is not declared. It may be inaccessible due to its protection level.	RevitCommands	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\LoadFamily.vb	43	Active
Error	BC30002	Type 'Autodesk.Revit.Attributes.Regeneration' is not defined.	RevitCommands	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\LoadFamily.vb	44	Active
Error	BC30451	'Autodesk' is not declared. It may be inaccessible due to its protection level.	RevitCommands	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\LoadFamily.vb	44	Active
Error	BC30002	Type 'Autodesk.Revit.Attributes.Journaling' is not defined.	RevitCommands	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\LoadFamily.vb	45	Active
Error	BC30451	'Autodesk' is not declared. It may be inaccessible due to its protection level.	RevitCommands	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\LoadFamily.vb	45	Active
Error	BC30002	Type 'IExternalCommand' is not defined.	RevitCommands	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\LoadFamily.vb	48	Active
Error	BC30002	Type 'Autodesk.Revit.UI.ExternalCommandData' is not defined.	RevitCommands	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\LoadFamily.vb	66	Active
Error	BC30002	Type 'Autodesk.Revit.DB.ElementSet' is not defined.	RevitCommands	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\LoadFamily.vb	67	Active
Error	BC30002	Type 'Autodesk.Revit.UI.Result' is not defined.	RevitCommands	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\LoadFamily.vb	68	Active
Error	BC30002	Type 'Autodesk.Revit.UI.IExternalCommand' is not defined.	RevitCommands	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\LoadFamily.vb	68	Active
Error	BC30002	Type 'Autodesk.Revit.Attributes.Transaction' is not defined.	RevitCommands	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\LoadFamily.vb	104	Active
Error	BC30451	'Autodesk' is not declared. It may be inaccessible due to its protection level.	RevitCommands	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\LoadFamily.vb	104	Active
Error	BC30002	Type 'Autodesk.Revit.Attributes.Regeneration' is not defined.	RevitCommands	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\LoadFamily.vb	105	Active
Error	BC30451	'Autodesk' is not declared. It may be inaccessible due to its protection level.	RevitCommands	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\LoadFamily.vb	105	Active
Error	BC30002	Type 'Autodesk.Revit.UI.IExternalCommand' is not defined.	RevitCommands	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\LoadFamily.vb	107	Active
Error	BC30002	Type 'Autodesk.Revit.UI.ExternalCommandData' is not defined.	RevitCommands	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\LoadFamily.vb	114	Active
Error	BC30002	Type 'Autodesk.Revit.DB.ElementSet' is not defined.	RevitCommands	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\LoadFamily.vb	115	Active
Error	BC30002	Type 'Autodesk.Revit.UI.Result' is not defined.	RevitCommands	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\LoadFamily.vb	116	Active
Error	BC30002	Type 'Autodesk.Revit.UI.IExternalCommand' is not defined.	RevitCommands	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\LoadFamily.vb	116	Active
Error	BC30002	Type 'Autodesk.Revit.ApplicationServices.Application' is not defined.	RevitCommands	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\LoadFamily.vb	161	Active
Error	BC40056	Namespace or type specified in the Imports 'Autodesk.Revit.DB' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.	RevitCommands	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\RvtUtils.vb	24	Active
Error	BC30002	Type 'Autodesk.Revit.DB.Element' is not defined.	RevitCommands	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\RvtUtils.vb	38	Active
Error	BC30002	Type 'Autodesk.Revit.DB.Element' is not defined.	RevitCommands	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\RvtUtils.vb	48	Active
Error	BC30002	Type 'Autodesk.Revit.DB.Element' is not defined.	RevitCommands	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\RvtUtils.vb	65	Active
Error	BC30002	Type 'Autodesk.Revit.DB.Document' is not defined.	RevitCommands	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\RvtUtils.vb	96	Active
Error	BC30002	Type 'ParameterSet' is not defined.	RevitCommands	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\RvtUtils.vb	97	Active
Error	BC30002	Type 'Autodesk.Revit.DB.Document' is not defined.	RevitCommands	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\RvtUtils.vb	121	Active
Error	BC30002	Type 'Autodesk.Revit.DB.Parameter' is not defined.	RevitCommands	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\RvtUtils.vb	122	Active
Error	BC30002	Type 'Autodesk.Revit.ApplicationServices.Application' is not defined.	RevitCommands	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\RvtUtils.vb	165	Active
Error	BC30002	Type 'Autodesk.Revit.DB.Element' is not defined.	RevitCommands	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\RvtUtils.vb	166	Active
Error	BC30002	Type 'Autodesk.Revit.DB.GeometryElement' is not defined.	RevitCommands	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\RvtUtils.vb	191	Active
Error	BC30002	Type 'Autodesk.Revit.DB.Solid' is not defined.	RevitCommands	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\RvtUtils.vb	249	Active
Error	BC30002	Type 'Autodesk.Revit.DB.Curve' is not defined.	RevitCommands	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\RvtUtils.vb	289	Active
Error	BC30002	Type 'Autodesk.Revit.DB.Mesh' is not defined.	RevitCommands	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\RvtUtils.vb	301	Active
Error	BC30002	Type 'Autodesk.Revit.DB.XYZ' is not defined.	RevitCommands	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\RvtUtils.vb	313	Active
Error	BC30002	Type 'Autodesk.Revit.DB.XYZ' is not defined.	RevitCommands	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\RvtUtils.vb	325	Active
Error	BC30002	Type 'Autodesk.Revit.DB.Element' is not defined.	RevitCommands	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\RvtUtils.vb	338	Active
Error	BC40056	Namespace or type specified in the Imports 'Autodesk' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.	RevitCommands	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\Selection.vb	29	Active
Error	BC40056	Namespace or type specified in the Imports 'Autodesk.Revit.DB' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.	RevitCommands	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\Selection.vb	30	Active
Error	BC40056	Namespace or type specified in the Imports 'Autodesk.Revit.UI' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.	RevitCommands	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\Selection.vb	31	Active
Error	BC30002	Type 'Autodesk.Revit.Attributes.Transaction' is not defined.	RevitCommands	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\Selection.vb	35	Active
Error	BC30451	'Autodesk' is not declared. It may be inaccessible due to its protection level.	RevitCommands	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\Selection.vb	35	Active
Error	BC30002	Type 'Autodesk.Revit.Attributes.Regeneration' is not defined.	RevitCommands	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\Selection.vb	36	Active
Error	BC30451	'Autodesk' is not declared. It may be inaccessible due to its protection level.	RevitCommands	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\Selection.vb	36	Active
Error	BC30002	Type 'Autodesk.Revit.Attributes.Journaling' is not defined.	RevitCommands	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\Selection.vb	37	Active
Error	BC30451	'Autodesk' is not declared. It may be inaccessible due to its protection level.	RevitCommands	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\Selection.vb	37	Active
Error	BC30002	Type 'Autodesk.Revit.UI.IExternalCommand' is not defined.	RevitCommands	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\Selection.vb	40	Active
Error	BC30002	Type 'Autodesk.Revit.UI.ExternalCommandData' is not defined.	RevitCommands	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\Selection.vb	58	Active
Error	BC30002	Type 'Autodesk.Revit.DB.ElementSet' is not defined.	RevitCommands	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\Selection.vb	59	Active
Error	BC30002	Type 'Autodesk.Revit.UI.Result' is not defined.	RevitCommands	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\Selection.vb	60	Active
Error	BC30002	Type 'Autodesk.Revit.UI.IExternalCommand' is not defined.	RevitCommands	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\Selection.vb	60	Active
Error	BC40056	Namespace or type specified in the Imports 'Autodesk' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.	RevitCommands	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\ShowElementData.vb	29	Active
Error	BC40056	Namespace or type specified in the Imports 'Autodesk.Revit.DB' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.	RevitCommands	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\ShowElementData.vb	30	Active
Error	BC30002	Type 'Autodesk.Revit.Attributes.Transaction' is not defined.	RevitCommands	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\ShowElementData.vb	36	Active
Error	BC30451	'Autodesk' is not declared. It may be inaccessible due to its protection level.	RevitCommands	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\ShowElementData.vb	36	Active
Error	BC30002	Type 'Autodesk.Revit.Attributes.Regeneration' is not defined.	RevitCommands	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\ShowElementData.vb	37	Active
Error	BC30451	'Autodesk' is not declared. It may be inaccessible due to its protection level.	RevitCommands	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\ShowElementData.vb	37	Active
Error	BC30002	Type 'Autodesk.Revit.Attributes.Journaling' is not defined.	RevitCommands	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\ShowElementData.vb	38	Active
Error	BC30451	'Autodesk' is not declared. It may be inaccessible due to its protection level.	RevitCommands	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\ShowElementData.vb	38	Active
Error	BC30002	Type 'Autodesk.Revit.UI.IExternalCommand' is not defined.	RevitCommands	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\ShowElementData.vb	41	Active
Error	BC30002	Type 'Autodesk.Revit.UI.ExternalCommandData' is not defined.	RevitCommands	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\ShowElementData.vb	59	Active
Error	BC30002	Type 'Autodesk.Revit.DB.ElementSet' is not defined.	RevitCommands	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\ShowElementData.vb	60	Active
Error	BC30002	Type 'Autodesk.Revit.UI.Result' is not defined.	RevitCommands	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\ShowElementData.vb	61	Active
Error	BC30002	Type 'Autodesk.Revit.UI.IExternalCommand' is not defined.	RevitCommands	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\ShowElementData.vb	61	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs	39	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs	39	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs	40	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs	40	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs	41	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs	41	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs	42	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs	44	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs	47	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs	47	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs	49	Active
Error	CS0246	The type or namespace name 'WallType' could not be found (are you missing a using directive or an assembly reference?)	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs	76	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs	76	Active
Error	CS0246	The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs	98	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs	98	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs	121	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs	121	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs	134	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs	171	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs	171	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs	188	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs	188	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs	205	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs	205	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs	218	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs	218	Active
Error	CS0246	The type or namespace name 'RibbonItem' could not be found (are you missing a using directive or an assembly reference?)	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs	240	Active
Error	CS0246	The type or namespace name 'RibbonPanel' could not be found (are you missing a using directive or an assembly reference?)	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs	240	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs	258	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs	258	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs	259	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs	259	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs	268	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs	268	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs	269	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs	269	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs	270	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs	273	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs	273	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs	275	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs	295	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs	295	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs	296	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs	296	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs	297	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs	301	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs	301	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs	303	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs	326	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs	326	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs	327	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs	327	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs	328	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs	332	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs	332	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs	334	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs	358	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs	358	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs	359	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs	359	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs	360	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs	364	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs	364	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs	366	Active
Error	CS0246	The type or namespace name 'RibbonItem' could not be found (are you missing a using directive or an assembly reference?)	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs	402	Active
Error	CS0246	The type or namespace name 'RibbonPanel' could not be found (are you missing a using directive or an assembly reference?)	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs	402	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs	422	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs	422	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs	423	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs	423	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs	424	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs	428	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs	428	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs	430	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\Ribbon.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\Ribbon.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\Ribbon.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\Ribbon.cs	34	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\Ribbon.cs	35	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\Ribbon.cs	52	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\Ribbon.cs	52	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\Ribbon.cs	53	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\Ribbon.cs	53	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\Ribbon.cs	54	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\Ribbon.cs	54	Active
Error	CS0246	The type or namespace name 'IExternalApplication' could not be found (are you missing a using directive or an assembly reference?)	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\Ribbon.cs	55	Active
Error	CS0246	The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\Ribbon.cs	62	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\Ribbon.cs	77	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\Ribbon.cs	77	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\Ribbon.cs	106	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\Ribbon.cs	106	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\Ribbon.cs	134	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\Ribbon.cs	238	Active
Error	CS0246	The type or namespace name 'ComboBoxDropDownOpenedEventArgs' could not be found (are you missing a using directive or an assembly reference?)	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\Ribbon.cs	262	Active
Error	CS0246	The type or namespace name 'TextBoxEnterPressedEventArgs' could not be found (are you missing a using directive or an assembly reference?)	Ribbon	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\Ribbon.cs	293	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RoofsRooms	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoofsRooms\CS\Command.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RoofsRooms	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoofsRooms\CS\Command.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RoofsRooms	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoofsRooms\CS\Command.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RoofsRooms	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoofsRooms\CS\Command.cs	34	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RoofsRooms	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoofsRooms\CS\Command.cs	42	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	RoofsRooms	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoofsRooms\CS\Command.cs	42	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RoofsRooms	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoofsRooms\CS\Command.cs	43	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	RoofsRooms	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoofsRooms\CS\Command.cs	43	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RoofsRooms	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoofsRooms\CS\Command.cs	44	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	RoofsRooms	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoofsRooms\CS\Command.cs	44	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	RoofsRooms	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoofsRooms\CS\Command.cs	45	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RoofsRooms	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoofsRooms\CS\Command.cs	49	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	RoofsRooms	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoofsRooms\CS\Command.cs	51	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RoofsRooms	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoofsRooms\CS\Command.cs	71	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	RoofsRooms	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoofsRooms\CS\Command.cs	71	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RoofsRooms	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoofsRooms\CS\Command.cs	72	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RoofsRooms	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoofsRooms\CS\Command.cs	130	Active
Error	CS0246	The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)	RoofsRooms	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoofsRooms\CS\Command.cs	252	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RoomSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\Command.cs	25	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RoomSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\Command.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RoomSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\Command.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RoomSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\Command.cs	37	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	RoomSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\Command.cs	37	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RoomSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\Command.cs	38	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	RoomSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\Command.cs	38	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RoomSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\Command.cs	39	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	RoomSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\Command.cs	39	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	RoomSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\Command.cs	40	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RoomSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\Command.cs	58	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RoomSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\Command.cs	58	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RoomSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\Command.cs	59	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RoomSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\CtrlApplication.cs	25	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RoomSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\CtrlApplication.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RoomSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\CtrlApplication.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RoomSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\CtrlApplication.cs	35	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	RoomSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\CtrlApplication.cs	35	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RoomSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\CtrlApplication.cs	36	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	RoomSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\CtrlApplication.cs	36	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RoomSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\CtrlApplication.cs	37	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	RoomSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\CtrlApplication.cs	37	Active
Error	CS0246	The type or namespace name 'IExternalApplication' could not be found (are you missing a using directive or an assembly reference?)	RoomSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\CtrlApplication.cs	38	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RoomSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\CtrlApplication.cs	72	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	RoomSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\CtrlApplication.cs	72	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RoomSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\CtrlApplication.cs	90	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	RoomSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\CtrlApplication.cs	90	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RoomSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\EventsReactor.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RoomSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\EventsReactor.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RoomSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\EventsReactor.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RoomSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\EventsReactor.cs	33	Active
Error	CS0246	The type or namespace name 'DocumentSavingAsEventArgs' could not be found (are you missing a using directive or an assembly reference?)	RoomSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\EventsReactor.cs	159	Active
Error	CS0246	The type or namespace name 'DocumentSavingEventArgs' could not be found (are you missing a using directive or an assembly reference?)	RoomSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\EventsReactor.cs	170	Active
Error	CS0246	The type or namespace name 'DocumentClosedEventArgs' could not be found (are you missing a using directive or an assembly reference?)	RoomSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\EventsReactor.cs	182	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	RoomSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\EventsReactor.cs	243	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	RoomSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\EventsReactor.cs	437	Active
Error	CS0246	The type or namespace name 'Room' could not be found (are you missing a using directive or an assembly reference?)	RoomSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\EventsReactor.cs	437	Active
Error	CS0246	The type or namespace name 'Room' could not be found (are you missing a using directive or an assembly reference?)	RoomSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\EventsReactor.cs	482	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RoomSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\RoomScheduleForm.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RoomSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\RoomScheduleForm.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RoomSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\RoomScheduleForm.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RoomSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\RoomScheduleForm.cs	34	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RoomSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\RoomScheduleForm.cs	35	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	RoomSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\RoomScheduleForm.cs	50	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	RoomSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\RoomScheduleForm.cs	53	Active
Error	CS0246	The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)	RoomSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\RoomScheduleForm.cs	59	Active
Error	CS0246	The type or namespace name 'Phase' could not be found (are you missing a using directive or an assembly reference?)	RoomSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\RoomScheduleForm.cs	62	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	RoomSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\RoomScheduleForm.cs	76	Active
Error	CS0246	The type or namespace name 'Phase' could not be found (are you missing a using directive or an assembly reference?)	RoomSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\RoomScheduleForm.cs	413	Active
Error	CS0246	The type or namespace name 'Room' could not be found (are you missing a using directive or an assembly reference?)	RoomSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\RoomScheduleForm.cs	457	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RoomSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\RoomsData.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RoomSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\RoomsData.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RoomSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\RoomsData.cs	33	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	RoomSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\RoomsData.cs	80	Active
Error	CS0246	The type or namespace name 'Room' could not be found (are you missing a using directive or an assembly reference?)	RoomSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\RoomsData.cs	85	Active
Error	CS0246	The type or namespace name 'BuiltInParameter' could not be found (are you missing a using directive or an assembly reference?)	RoomSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\RoomsData.cs	90	Active
Error	CS0246	The type or namespace name 'Room' could not be found (are you missing a using directive or an assembly reference?)	RoomSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\RoomsData.cs	103	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	RoomSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\RoomsData.cs	118	Active
Error	CS0246	The type or namespace name 'BuiltInParameter' could not be found (are you missing a using directive or an assembly reference?)	RoomSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\RoomsData.cs	147	Active
Error	CS0246	The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)	RoomSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\RoomsData.cs	179	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	RoomSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\RoomsData.cs	248	Active
Error	CS0246	The type or namespace name 'Room' could not be found (are you missing a using directive or an assembly reference?)	RoomSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\RoomsData.cs	248	Active
Error	CS0246	The type or namespace name 'BuiltInParameter' could not be found (are you missing a using directive or an assembly reference?)	RoomSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\RoomsData.cs	248	Active
Error	CS0246	The type or namespace name 'Room' could not be found (are you missing a using directive or an assembly reference?)	RoomSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\RoomsData.cs	323	Active
Error	CS0246	The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)	RoomSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\RoomsData.cs	323	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	RoomSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\RoomsData.cs	342	Active
Error	CS0246	The type or namespace name 'Room' could not be found (are you missing a using directive or an assembly reference?)	RoomSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\RoomsData.cs	359	Active
Error	CS0246	The type or namespace name 'Room' could not be found (are you missing a using directive or an assembly reference?)	RoomSchedule	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\RoomsData.cs	359	Active
Error	BC2017	could not find library 'Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Viewers\RevitViewer\VB.NET\bin\RevitViewer.dll'	RoomViewer	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Viewers\RoomViewer\VB.NET\vbc	1	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Rooms	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Rooms\CS\Command.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Rooms	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Rooms\CS\Command.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Rooms	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Rooms\CS\Command.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Rooms	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Rooms\CS\Command.cs	40	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	Rooms	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Rooms\CS\Command.cs	40	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Rooms	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Rooms\CS\Command.cs	41	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	Rooms	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Rooms\CS\Command.cs	41	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Rooms	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Rooms\CS\Command.cs	42	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	Rooms	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Rooms\CS\Command.cs	42	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	Rooms	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Rooms\CS\Command.cs	43	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Rooms	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Rooms\CS\Command.cs	61	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Rooms	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Rooms\CS\Command.cs	61	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	Rooms	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Rooms\CS\Command.cs	63	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Rooms	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Rooms\CS\RoomInfoForm.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Rooms	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Rooms\CS\RoomInfoForm.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Rooms	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Rooms\CS\RoomInfoForm.cs	31	Active
Error	CS0246	The type or namespace name 'Room' could not be found (are you missing a using directive or an assembly reference?)	Rooms	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Rooms\CS\RoomInfoForm.cs	69	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Rooms	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Rooms\CS\RoomsData.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Rooms	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Rooms\CS\RoomsData.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Rooms	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Rooms\CS\RoomsData.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Rooms	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Rooms\CS\RoomsData.cs	34	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Rooms	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Rooms\CS\RoomsData.cs	44	Active
Error	CS0246	The type or namespace name 'Room' could not be found (are you missing a using directive or an assembly reference?)	Rooms	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Rooms\CS\RoomsData.cs	46	Active
Error	CS0246	The type or namespace name 'RoomTag' could not be found (are you missing a using directive or an assembly reference?)	Rooms	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Rooms\CS\RoomsData.cs	47	Active
Error	CS0246	The type or namespace name 'Room' could not be found (are you missing a using directive or an assembly reference?)	Rooms	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Rooms\CS\RoomsData.cs	48	Active
Error	CS0246	The type or namespace name 'Room' could not be found (are you missing a using directive or an assembly reference?)	Rooms	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Rooms\CS\RoomsData.cs	49	Active
Error	CS0246	The type or namespace name 'Room' could not be found (are you missing a using directive or an assembly reference?)	Rooms	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Rooms\CS\RoomsData.cs	125	Active
Error	CS0246	The type or namespace name 'RoomTag' could not be found (are you missing a using directive or an assembly reference?)	Rooms	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Rooms\CS\RoomsData.cs	137	Active
Error	CS0246	The type or namespace name 'Room' could not be found (are you missing a using directive or an assembly reference?)	Rooms	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Rooms\CS\RoomsData.cs	149	Active
Error	CS0246	The type or namespace name 'Room' could not be found (are you missing a using directive or an assembly reference?)	Rooms	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Rooms\CS\RoomsData.cs	161	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	Rooms	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Rooms\CS\RoomsData.cs	173	Active
Error	CS0246	The type or namespace name 'Room' could not be found (are you missing a using directive or an assembly reference?)	Rooms	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Rooms\CS\RoomsData.cs	269	Active
Error	CS0246	The type or namespace name 'BuiltInParameter' could not be found (are you missing a using directive or an assembly reference?)	Rooms	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Rooms\CS\RoomsData.cs	269	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RotateFramingObjects	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RotateFramingObjects\CS\RotateFramingObjects.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RotateFramingObjects	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RotateFramingObjects\CS\RotateFramingObjects.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RotateFramingObjects	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RotateFramingObjects\CS\RotateFramingObjects.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RotateFramingObjects	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RotateFramingObjects\CS\RotateFramingObjects.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RotateFramingObjects	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RotateFramingObjects\CS\RotateFramingObjects.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RotateFramingObjects	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RotateFramingObjects\CS\RotateFramingObjects.cs	40	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	RotateFramingObjects	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RotateFramingObjects\CS\RotateFramingObjects.cs	40	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RotateFramingObjects	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RotateFramingObjects\CS\RotateFramingObjects.cs	41	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	RotateFramingObjects	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RotateFramingObjects\CS\RotateFramingObjects.cs	41	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RotateFramingObjects	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RotateFramingObjects\CS\RotateFramingObjects.cs	42	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	RotateFramingObjects	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RotateFramingObjects\CS\RotateFramingObjects.cs	42	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	RotateFramingObjects	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RotateFramingObjects\CS\RotateFramingObjects.cs	43	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RotateFramingObjects	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RotateFramingObjects\CS\RotateFramingObjects.cs	45	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RotateFramingObjects	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RotateFramingObjects\CS\RotateFramingObjects.cs	102	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RotateFramingObjects	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RotateFramingObjects\CS\RotateFramingObjects.cs	102	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RotateFramingObjects	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RotateFramingObjects\CS\RotateFramingObjects.cs	103	Active
Error	CS0246	The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)	RotateFramingObjects	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RotateFramingObjects\CS\RotateFramingObjects.cs	302	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RotateFramingObjects	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RotateFramingObjects\CS\RotateFramingObjectsForm.cs	30	Active
Error	BC40056	Namespace or type specified in the Imports 'Autodesk.Revit' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.	RotateFramingObjects	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RotateFramingObjects\VB.NET\RotateFramingObjects.vb	28	Active
Error	BC40056	Namespace or type specified in the Imports 'Autodesk.Revit.DB' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.	RotateFramingObjects	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RotateFramingObjects\VB.NET\RotateFramingObjects.vb	29	Active
Error	BC40056	Namespace or type specified in the Imports 'Autodesk.Revit.UI' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.	RotateFramingObjects	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RotateFramingObjects\VB.NET\RotateFramingObjects.vb	30	Active
Error	BC30002	Type 'Autodesk.Revit.Attributes.Transaction' is not defined.	RotateFramingObjects	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RotateFramingObjects\VB.NET\RotateFramingObjects.vb	35	Active
Error	BC30451	'Autodesk' is not declared. It may be inaccessible due to its protection level.	RotateFramingObjects	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RotateFramingObjects\VB.NET\RotateFramingObjects.vb	35	Active
Error	BC30002	Type 'Autodesk.Revit.Attributes.Regeneration' is not defined.	RotateFramingObjects	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RotateFramingObjects\VB.NET\RotateFramingObjects.vb	36	Active
Error	BC30451	'Autodesk' is not declared. It may be inaccessible due to its protection level.	RotateFramingObjects	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RotateFramingObjects\VB.NET\RotateFramingObjects.vb	36	Active
Error	BC30002	Type 'Autodesk.Revit.Attributes.Journaling' is not defined.	RotateFramingObjects	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RotateFramingObjects\VB.NET\RotateFramingObjects.vb	37	Active
Error	BC30451	'Autodesk' is not declared. It may be inaccessible due to its protection level.	RotateFramingObjects	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RotateFramingObjects\VB.NET\RotateFramingObjects.vb	37	Active
Error	BC30002	Type 'IExternalCommand' is not defined.	RotateFramingObjects	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RotateFramingObjects\VB.NET\RotateFramingObjects.vb	39	Active
Error	BC30002	Type 'Autodesk.Revit.UI.UIApplication' is not defined.	RotateFramingObjects	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RotateFramingObjects\VB.NET\RotateFramingObjects.vb	41	Active
Error	BC30002	Type 'Autodesk.Revit.UI.ExternalCommandData' is not defined.	RotateFramingObjects	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RotateFramingObjects\VB.NET\RotateFramingObjects.vb	80	Active
Error	BC30002	Type 'Autodesk.Revit.DB.ElementSet' is not defined.	RotateFramingObjects	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RotateFramingObjects\VB.NET\RotateFramingObjects.vb	82	Active
Error	BC30002	Type 'Autodesk.Revit.UI.Result' is not defined.	RotateFramingObjects	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RotateFramingObjects\VB.NET\RotateFramingObjects.vb	83	Active
Error	BC30002	Type 'IExternalCommand' is not defined.	RotateFramingObjects	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RotateFramingObjects\VB.NET\RotateFramingObjects.vb	83	Active
Error	BC30002	Type 'Autodesk.Revit.DB.FamilyInstance' is not defined.	RotateFramingObjects	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RotateFramingObjects\VB.NET\RotateFramingObjects.vb	262	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceAnalysis\Analyzer.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceAnalysis\Analyzer.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceAnalysis\Analyzer.cs	41	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceAnalysis\Analyzer.cs	42	Active
Error	CS0246	The type or namespace name 'RoutingPreferenceManager' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceAnalysis\Analyzer.cs	52	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceAnalysis\Analyzer.cs	52	Active
Error	CS0246	The type or namespace name 'RoutingPreferenceManager' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceAnalysis\Analyzer.cs	65	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceAnalysis\Analyzer.cs	65	Active
Error	CS0246	The type or namespace name 'RoutingPreferenceManager' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceAnalysis\Analyzer.cs	101	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceAnalysis\Analyzer.cs	101	Active
Error	CS0246	The type or namespace name 'RoutingPreferenceManager' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceAnalysis\Analyzer.cs	200	Active
Error	CS0246	The type or namespace name 'RoutingPreferenceRuleGroupType' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceAnalysis\Analyzer.cs	200	Active
Error	CS0246	The type or namespace name 'RoutingPreferenceManager' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceAnalysis\Analyzer.cs	241	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceAnalysis\Analyzer.cs	241	Active
Error	CS0246	The type or namespace name 'RoutingPreferenceRuleGroupType' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceAnalysis\Analyzer.cs	241	Active
Error	CS0246	The type or namespace name 'RoutingPreferenceManager' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceAnalysis\Analyzer.cs	269	Active
Error	CS0246	The type or namespace name 'RoutingPreferenceRuleGroupType' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceAnalysis\Analyzer.cs	269	Active
Error	CS0246	The type or namespace name 'RoutingPreferenceManager' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceAnalysis\Analyzer.cs	292	Active
Error	CS0246	The type or namespace name 'RoutingPreferenceRuleGroupType' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceAnalysis\Analyzer.cs	292	Active
Error	CS0246	The type or namespace name 'RoutingPreferenceManager' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceAnalysis\Analyzer.cs	316	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceAnalysis\Analyzer.cs	356	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceAnalysis\Analyzer.cs	363	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceAnalysis\Command.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceAnalysis\Command.cs	33	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceAnalysis\Command.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceAnalysis\Command.cs	34	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceAnalysis\Command.cs	52	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceAnalysis\Command.cs	52	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceAnalysis\Command.cs	52	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceAnalysis\MainWindow.xaml.cs	36	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceAnalysis\MainWindow.xaml.cs	37	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceAnalysis\MainWindow.xaml.cs	52	Active
Error	CS0246	The type or namespace name 'PipeType' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceAnalysis\MainWindow.xaml.cs	111	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceAnalysis\MainWindow.xaml.cs	175	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceAnalysis\PartIdInfo.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceAnalysis\PartIdInfo.cs	29	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceAnalysis\PartIdInfo.cs	42	Active
Error	CS0246	The type or namespace name 'RoutingPreferenceRuleGroupType' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceAnalysis\PartIdInfo.cs	44	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceAnalysis\PartIdInfo.cs	49	Active
Error	CS0246	The type or namespace name 'RoutingPreferenceRuleGroupType' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceAnalysis\PartIdInfo.cs	57	Active
Error	CS0246	The type or namespace name 'RoutingPreferenceRuleGroupType' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceAnalysis\PartIdInfo.cs	67	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceAnalysis\PartIdInfo.cs	67	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceAnalysis\PartIdInfo.cs	79	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceAnalysis\PartIdInfo.cs	88	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceAnalysis\PartIdInfo.cs	88	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceAnalysis\PartIdInfo.cs	116	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\CommandReadPreferences.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\CommandReadPreferences.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\CommandReadPreferences.cs	41	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\CommandReadPreferences.cs	41	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\CommandReadPreferences.cs	42	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\CommandReadPreferences.cs	60	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\CommandReadPreferences.cs	60	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\CommandReadPreferences.cs	60	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\CommandWritePreferences.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\CommandWritePreferences.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\CommandWritePreferences.cs	41	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\CommandWritePreferences.cs	41	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\CommandWritePreferences.cs	42	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\CommandWritePreferences.cs	60	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\CommandWritePreferences.cs	60	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\CommandWritePreferences.cs	60	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilder.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilder.cs	27	Active
Error	CS0246	The type or namespace name 'Segment' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilder.cs	42	Active
Error	CS0246	The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilder.cs	43	Active
Error	CS0246	The type or namespace name 'Material' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilder.cs	44	Active
Error	CS0246	The type or namespace name 'PipeScheduleType' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilder.cs	45	Active
Error	CS0246	The type or namespace name 'PipeType' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilder.cs	46	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilder.cs	47	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilder.cs	54	Active
Error	CS0246	The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilder.cs	268	Active
Error	CS0246	The type or namespace name 'PipeType' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilder.cs	308	Active
Error	CS0246	The type or namespace name 'PipeType' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilder.cs	325	Active
Error	CS0246	The type or namespace name 'PipeScheduleType' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilder.cs	345	Active
Error	CS0246	The type or namespace name 'PipeSegment' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilder.cs	407	Active
Error	CS0246	The type or namespace name 'MEPSize' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilder.cs	431	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilder.cs	431	Active
Error	CS0246	The type or namespace name 'MEPSize' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilder.cs	472	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilder.cs	472	Active
Error	CS0246	The type or namespace name 'RoutingPreferenceManager' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilder.cs	524	Active
Error	CS0246	The type or namespace name 'RoutingPreferenceRule' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilder.cs	577	Active
Error	CS0246	The type or namespace name 'RoutingPreferenceRuleGroupType' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilder.cs	577	Active
Error	CS0246	The type or namespace name 'RoutingPreferenceRule' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilder.cs	653	Active
Error	CS0246	The type or namespace name 'RoutingPreferenceRuleGroupType' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilder.cs	653	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilder.cs	702	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilder.cs	712	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilder.cs	722	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilder.cs	732	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilder.cs	744	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilder.cs	744	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilder.cs	744	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilder.cs	761	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilder.cs	771	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilder.cs	784	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilder.cs	798	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilder.cs	811	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilder.cs	825	Active
Error	CS0246	The type or namespace name 'PipeSegment' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilder.cs	879	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilder.cs	879	Active
Error	CS0246	The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilder.cs	892	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilder.cs	892	Active
Error	CS0246	The type or namespace name 'Material' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilder.cs	906	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilder.cs	906	Active
Error	CS0246	The type or namespace name 'PipeScheduleType' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilder.cs	919	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilder.cs	919	Active
Error	CS0246	The type or namespace name 'PipeType' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilder.cs	932	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilder.cs	932	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilderUtility.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilderUtility.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilderUtility.cs	44	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilderUtility.cs	183	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\Utility.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\Utility.cs	34	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\Utility.cs	43	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\Utility.cs	61	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RoutingPreferenceTools	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\Utility.cs	68	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RvtSamples	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RvtSamples\CS\Application.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RvtSamples	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RvtSamples\CS\Application.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RvtSamples	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RvtSamples\CS\Application.cs	34	Active
Error	CS0246	The type or namespace name 'IExternalApplication' could not be found (are you missing a using directive or an assembly reference?)	RvtSamples	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RvtSamples\CS\Application.cs	44	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	RvtSamples	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RvtSamples\CS\Application.cs	137	Active
Error	CS0246	The type or namespace name 'PulldownButton' could not be found (are you missing a using directive or an assembly reference?)	RvtSamples	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RvtSamples\CS\Application.cs	141	Active
Error	CS0246	The type or namespace name 'RibbonPanel' could not be found (are you missing a using directive or an assembly reference?)	RvtSamples	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RvtSamples\CS\Application.cs	153	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RvtSamples	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RvtSamples\CS\Application.cs	169	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	RvtSamples	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RvtSamples\CS\Application.cs	169	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	RvtSamples	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RvtSamples\CS\Application.cs	321	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	RvtSamples	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RvtSamples\CS\Application.cs	321	Active
Error	CS0246	The type or namespace name 'PulldownButton' could not be found (are you missing a using directive or an assembly reference?)	RvtSamples	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RvtSamples\CS\Application.cs	536	Active
Error	CS0246	The type or namespace name 'RibbonItem' could not be found (are you missing a using directive or an assembly reference?)	RvtSamples	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RvtSamples\CS\Application.cs	654	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\AddElementsToConnection.cs	24	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\AddElementsToConnection.cs	25	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\AddElementsToConnection.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\AddElementsToConnection.cs	38	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\AddElementsToConnection.cs	38	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\AddElementsToConnection.cs	39	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\AddElementsToConnection.cs	39	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\AddElementsToConnection.cs	40	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\AddElementsToConnection.cs	40	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\AddElementsToConnection.cs	41	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\AddElementsToConnection.cs	59	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\AddElementsToConnection.cs	59	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\AddElementsToConnection.cs	60	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\AddElementsToCustomConnection.cs	25	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\AddElementsToCustomConnection.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\AddElementsToCustomConnection.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\AddElementsToCustomConnection.cs	39	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\AddElementsToCustomConnection.cs	39	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\AddElementsToCustomConnection.cs	40	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\AddElementsToCustomConnection.cs	40	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\AddElementsToCustomConnection.cs	41	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\AddElementsToCustomConnection.cs	41	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\AddElementsToCustomConnection.cs	42	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\AddElementsToCustomConnection.cs	60	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\AddElementsToCustomConnection.cs	60	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\AddElementsToCustomConnection.cs	61	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\BackgroundCalculation.cs	24	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\BackgroundCalculation.cs	25	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\BackgroundCalculation.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\BackgroundCalculation.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\BackgroundCalculation.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\BackgroundCalculation.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\BackgroundCalculation.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\BackgroundCalculation.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\BackgroundCalculation.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\BackgroundCalculation.cs	39	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\BackgroundCalculation.cs	39	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\BackgroundCalculation.cs	40	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\BackgroundCalculation.cs	40	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\BackgroundCalculation.cs	41	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\BackgroundCalculation.cs	41	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\BackgroundCalculation.cs	42	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\BackgroundCalculation.cs	45	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\BackgroundCalculation.cs	47	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\BackgroundCalculation.cs	65	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\BackgroundCalculation.cs	65	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\BackgroundCalculation.cs	66	Active
Error	CS0246	The type or namespace name 'IdlingEventArgs' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\BackgroundCalculation.cs	108	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\BackgroundCalculation.cs	135	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\BackgroundCalculation.cs	135	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateAnchorPattern.cs	24	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateAnchorPattern.cs	25	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateAnchorPattern.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateAnchorPattern.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateAnchorPattern.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateAnchorPattern.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateAnchorPattern.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateAnchorPattern.cs	41	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateAnchorPattern.cs	41	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateAnchorPattern.cs	42	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateAnchorPattern.cs	42	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateAnchorPattern.cs	43	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateAnchorPattern.cs	43	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateAnchorPattern.cs	44	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateAnchorPattern.cs	62	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateAnchorPattern.cs	62	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateAnchorPattern.cs	63	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateBoltPattern.cs	24	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateBoltPattern.cs	25	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateBoltPattern.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateBoltPattern.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateBoltPattern.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateBoltPattern.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateBoltPattern.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateBoltPattern.cs	40	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateBoltPattern.cs	40	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateBoltPattern.cs	41	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateBoltPattern.cs	41	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateBoltPattern.cs	42	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateBoltPattern.cs	42	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateBoltPattern.cs	43	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateBoltPattern.cs	61	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateBoltPattern.cs	61	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateBoltPattern.cs	62	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateContourCut.cs	24	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateContourCut.cs	25	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateContourCut.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateContourCut.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateContourCut.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateContourCut.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateContourCut.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateContourCut.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateContourCut.cs	41	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateContourCut.cs	41	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateContourCut.cs	42	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateContourCut.cs	42	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateContourCut.cs	43	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateContourCut.cs	43	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateContourCut.cs	44	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateContourCut.cs	62	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateContourCut.cs	62	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateContourCut.cs	63	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateCopeSkewed.cs	24	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateCopeSkewed.cs	25	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateCopeSkewed.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateCopeSkewed.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateCopeSkewed.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateCopeSkewed.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateCopeSkewed.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateCopeSkewed.cs	40	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateCopeSkewed.cs	40	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateCopeSkewed.cs	41	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateCopeSkewed.cs	41	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateCopeSkewed.cs	42	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateCopeSkewed.cs	42	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateCopeSkewed.cs	43	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateCopeSkewed.cs	61	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateCopeSkewed.cs	61	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateCopeSkewed.cs	62	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateCornerCut.cs	24	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateCornerCut.cs	25	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateCornerCut.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateCornerCut.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateCornerCut.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateCornerCut.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateCornerCut.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateCornerCut.cs	40	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateCornerCut.cs	40	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateCornerCut.cs	41	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateCornerCut.cs	41	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateCornerCut.cs	42	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateCornerCut.cs	42	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateCornerCut.cs	43	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateCornerCut.cs	61	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateCornerCut.cs	61	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateCornerCut.cs	62	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreatePlate.cs	24	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreatePlate.cs	25	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreatePlate.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreatePlate.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreatePlate.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreatePlate.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreatePlate.cs	37	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreatePlate.cs	37	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreatePlate.cs	38	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreatePlate.cs	38	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreatePlate.cs	39	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreatePlate.cs	39	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreatePlate.cs	40	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreatePlate.cs	58	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreatePlate.cs	58	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreatePlate.cs	59	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreatePlateHole.cs	24	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreatePlateHole.cs	25	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreatePlateHole.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreatePlateHole.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreatePlateHole.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreatePlateHole.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreatePlateHole.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreatePlateHole.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreatePlateHole.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreatePlateHole.cs	40	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreatePlateHole.cs	40	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreatePlateHole.cs	41	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreatePlateHole.cs	41	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreatePlateHole.cs	42	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreatePlateHole.cs	42	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreatePlateHole.cs	43	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreatePlateHole.cs	61	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreatePlateHole.cs	61	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreatePlateHole.cs	62	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateShearStudPattern.cs	24	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateShearStudPattern.cs	25	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateShearStudPattern.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateShearStudPattern.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateShearStudPattern.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateShearStudPattern.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateShearStudPattern.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateShearStudPattern.cs	39	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateShearStudPattern.cs	39	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateShearStudPattern.cs	40	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateShearStudPattern.cs	40	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateShearStudPattern.cs	41	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateShearStudPattern.cs	41	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateShearStudPattern.cs	42	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateShearStudPattern.cs	60	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateShearStudPattern.cs	60	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateShearStudPattern.cs	61	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateShortening.cs	24	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateShortening.cs	25	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateShortening.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateShortening.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateShortening.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateShortening.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateShortening.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateShortening.cs	40	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateShortening.cs	40	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateShortening.cs	41	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateShortening.cs	41	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateShortening.cs	42	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateShortening.cs	42	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateShortening.cs	43	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateShortening.cs	61	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateShortening.cs	61	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateShortening.cs	62	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateWeldPoint.cs	24	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateWeldPoint.cs	25	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateWeldPoint.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateWeldPoint.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateWeldPoint.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateWeldPoint.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateWeldPoint.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateWeldPoint.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateWeldPoint.cs	40	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateWeldPoint.cs	40	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateWeldPoint.cs	41	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateWeldPoint.cs	41	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateWeldPoint.cs	42	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateWeldPoint.cs	42	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateWeldPoint.cs	43	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateWeldPoint.cs	61	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateWeldPoint.cs	61	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateWeldPoint.cs	62	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\DeleteConnection.cs	24	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\DeleteConnection.cs	25	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\DeleteConnection.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\DeleteConnection.cs	34	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\DeleteConnection.cs	34	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\DeleteConnection.cs	35	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\DeleteConnection.cs	35	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\DeleteConnection.cs	36	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\DeleteConnection.cs	36	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\DeleteConnection.cs	37	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\DeleteConnection.cs	55	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\DeleteConnection.cs	55	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\DeleteConnection.cs	56	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\Functions.cs	23	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\Functions.cs	24	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\Functions.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\Functions.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\Functions.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\Functions.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\Functions.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\Functions.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\Functions.cs	34	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\Functions.cs	35	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\Functions.cs	36	Active
Error	CS0246	The type or namespace name 'StructuralConnectionHandler' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\Functions.cs	53	Active
Error	CS0246	The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\Functions.cs	53	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\Functions.cs	74	Active
Error	CS0246	The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\Functions.cs	74	Active
Error	CS0246	The type or namespace name 'Reference' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\Functions.cs	95	Active
Error	CS0246	The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\Functions.cs	95	Active
Error	CS0246	The type or namespace name 'FilerObject' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\Functions.cs	118	Active
Error	CS0246	The type or namespace name 'Reference' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\Functions.cs	118	Active
Error	CS0246	The type or namespace name 'FilerObject' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\Functions.cs	138	Active
Error	CS0246	The type or namespace name 'Reference' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\Functions.cs	138	Active
Error	CS0246	The type or namespace name 'Beam' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\Functions.cs	155	Active
Error	CS0246	The type or namespace name 'Beam' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\Functions.cs	155	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\Functions.cs	155	Active
Error	CS0246	The type or namespace name 'Beam' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\Functions.cs	172	Active
Error	CS0246	The type or namespace name 'Beam' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\Functions.cs	172	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\Functions.cs	172	Active
Error	CS0246	The type or namespace name 'Point3d' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\Functions.cs	185	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\Functions.cs	185	Active
Error	CS0246	The type or namespace name 'ISelectionFilter' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\Functions.cs	196	Active
Error	CS0246	The type or namespace name 'LogicalOrFilter' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\Functions.cs	198	Active
Error	CS0246	The type or namespace name 'LogicalOrFilter' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\Functions.cs	204	Active
Error	CS0246	The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\Functions.cs	214	Active
Error	CS0246	The type or namespace name 'Reference' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\Functions.cs	224	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\Functions.cs	224	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\RemoveElementsFromConnection.cs	24	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\RemoveElementsFromConnection.cs	25	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\RemoveElementsFromConnection.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\RemoveElementsFromConnection.cs	36	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\RemoveElementsFromConnection.cs	36	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\RemoveElementsFromConnection.cs	37	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\RemoveElementsFromConnection.cs	37	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\RemoveElementsFromConnection.cs	38	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\RemoveElementsFromConnection.cs	38	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\RemoveElementsFromConnection.cs	39	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\RemoveElementsFromConnection.cs	57	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\RemoveElementsFromConnection.cs	57	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\RemoveElementsFromConnection.cs	58	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\RemoveSubelementsFromCustomConnection.cs	24	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\RemoveSubelementsFromCustomConnection.cs	25	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\RemoveSubelementsFromCustomConnection.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\RemoveSubelementsFromCustomConnection.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\RemoveSubelementsFromCustomConnection.cs	38	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\RemoveSubelementsFromCustomConnection.cs	38	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\RemoveSubelementsFromCustomConnection.cs	39	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\RemoveSubelementsFromCustomConnection.cs	39	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\RemoveSubelementsFromCustomConnection.cs	40	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\RemoveSubelementsFromCustomConnection.cs	40	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\RemoveSubelementsFromCustomConnection.cs	41	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\RemoveSubelementsFromCustomConnection.cs	59	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\RemoveSubelementsFromCustomConnection.cs	59	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\RemoveSubelementsFromCustomConnection.cs	60	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\UpdateConnectionDetailedParameters.cs	7	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\UpdateConnectionDetailedParameters.cs	8	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\UpdateConnectionDetailedParameters.cs	9	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\UpdateConnectionDetailedParameters.cs	10	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\UpdateConnectionDetailedParameters.cs	11	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\UpdateConnectionDetailedParameters.cs	12	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\UpdateConnectionDetailedParameters.cs	13	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\UpdateConnectionDetailedParameters.cs	14	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\UpdateConnectionDetailedParameters.cs	15	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\UpdateConnectionDetailedParameters.cs	23	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\UpdateConnectionDetailedParameters.cs	23	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\UpdateConnectionDetailedParameters.cs	24	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\UpdateConnectionDetailedParameters.cs	24	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\UpdateConnectionDetailedParameters.cs	25	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\UpdateConnectionDetailedParameters.cs	25	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\UpdateConnectionDetailedParameters.cs	26	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\UpdateConnectionDetailedParameters.cs	44	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\UpdateConnectionDetailedParameters.cs	44	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	SampleCommandsSteelElements	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\UpdateConnectionDetailedParameters.cs	44	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ScheduleAutomaticFormatter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleAutomaticFormatter\CS\Application.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ScheduleAutomaticFormatter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleAutomaticFormatter\CS\Application.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ScheduleAutomaticFormatter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleAutomaticFormatter\CS\Application.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ScheduleAutomaticFormatter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleAutomaticFormatter\CS\Application.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ScheduleAutomaticFormatter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleAutomaticFormatter\CS\Application.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ScheduleAutomaticFormatter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleAutomaticFormatter\CS\Application.cs	42	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	ScheduleAutomaticFormatter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleAutomaticFormatter\CS\Application.cs	42	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ScheduleAutomaticFormatter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleAutomaticFormatter\CS\Application.cs	43	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	ScheduleAutomaticFormatter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleAutomaticFormatter\CS\Application.cs	43	Active
Error	CS0246	The type or namespace name 'IExternalApplication' could not be found (are you missing a using directive or an assembly reference?)	ScheduleAutomaticFormatter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleAutomaticFormatter\CS\Application.cs	44	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	ScheduleAutomaticFormatter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleAutomaticFormatter\CS\Application.cs	52	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	ScheduleAutomaticFormatter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleAutomaticFormatter\CS\Application.cs	52	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	ScheduleAutomaticFormatter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleAutomaticFormatter\CS\Application.cs	62	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	ScheduleAutomaticFormatter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleAutomaticFormatter\CS\Application.cs	62	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	ScheduleAutomaticFormatter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleAutomaticFormatter\CS\Application.cs	70	Active
Error	CS0246	The type or namespace name 'PushButton' could not be found (are you missing a using directive or an assembly reference?)	ScheduleAutomaticFormatter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleAutomaticFormatter\CS\Application.cs	89	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ScheduleAutomaticFormatter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleAutomaticFormatter\CS\ScheduleFormatter.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ScheduleAutomaticFormatter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleAutomaticFormatter\CS\ScheduleFormatter.cs	28	Active
Error	CS0246	The type or namespace name 'IUpdater' could not be found (are you missing a using directive or an assembly reference?)	ScheduleAutomaticFormatter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleAutomaticFormatter\CS\ScheduleFormatter.cs	35	Active
Error	CS0246	The type or namespace name 'ViewSchedule' could not be found (are you missing a using directive or an assembly reference?)	ScheduleAutomaticFormatter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleAutomaticFormatter\CS\ScheduleFormatter.cs	41	Active
Error	CS0246	The type or namespace name 'Schema' could not be found (are you missing a using directive or an assembly reference?)	ScheduleAutomaticFormatter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleAutomaticFormatter\CS\ScheduleFormatter.cs	86	Active
Error	CS0246	The type or namespace name 'AddInId' could not be found (are you missing a using directive or an assembly reference?)	ScheduleAutomaticFormatter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleAutomaticFormatter\CS\ScheduleFormatter.cs	95	Active
Error	CS0246	The type or namespace name 'UpdaterData' could not be found (are you missing a using directive or an assembly reference?)	ScheduleAutomaticFormatter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleAutomaticFormatter\CS\ScheduleFormatter.cs	116	Active
Error	CS0246	The type or namespace name 'ChangePriority' could not be found (are you missing a using directive or an assembly reference?)	ScheduleAutomaticFormatter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleAutomaticFormatter\CS\ScheduleFormatter.cs	139	Active
Error	CS0246	The type or namespace name 'UpdaterId' could not be found (are you missing a using directive or an assembly reference?)	ScheduleAutomaticFormatter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleAutomaticFormatter\CS\ScheduleFormatter.cs	148	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ScheduleAutomaticFormatter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleAutomaticFormatter\CS\ScheduleFormatterCommand.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ScheduleAutomaticFormatter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleAutomaticFormatter\CS\ScheduleFormatterCommand.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ScheduleAutomaticFormatter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleAutomaticFormatter\CS\ScheduleFormatterCommand.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ScheduleAutomaticFormatter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleAutomaticFormatter\CS\ScheduleFormatterCommand.cs	37	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	ScheduleAutomaticFormatter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleAutomaticFormatter\CS\ScheduleFormatterCommand.cs	37	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	ScheduleAutomaticFormatter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleAutomaticFormatter\CS\ScheduleFormatterCommand.cs	38	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	ScheduleAutomaticFormatter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleAutomaticFormatter\CS\ScheduleFormatterCommand.cs	50	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	ScheduleAutomaticFormatter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleAutomaticFormatter\CS\ScheduleFormatterCommand.cs	50	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ScheduleAutomaticFormatter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleAutomaticFormatter\CS\ScheduleFormatterCommand.cs	50	Active
Error	CS0246	The type or namespace name 'ViewSchedule' could not be found (are you missing a using directive or an assembly reference?)	ScheduleAutomaticFormatter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleAutomaticFormatter\CS\ScheduleFormatterCommand.cs	89	Active
Error	CS0246	The type or namespace name 'Schema' could not be found (are you missing a using directive or an assembly reference?)	ScheduleAutomaticFormatter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleAutomaticFormatter\CS\ScheduleFormatterCommand.cs	89	Active
Error	CS0246	The type or namespace name 'Schema' could not be found (are you missing a using directive or an assembly reference?)	ScheduleAutomaticFormatter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleAutomaticFormatter\CS\ScheduleFormatterCommand.cs	107	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ScheduleCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleCreation\CS\Command.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ScheduleCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleCreation\CS\Command.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ScheduleCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleCreation\CS\Command.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ScheduleCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleCreation\CS\Command.cs	38	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	ScheduleCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleCreation\CS\Command.cs	38	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ScheduleCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleCreation\CS\Command.cs	39	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	ScheduleCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleCreation\CS\Command.cs	39	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	ScheduleCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleCreation\CS\Command.cs	40	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	ScheduleCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleCreation\CS\Command.cs	58	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	ScheduleCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleCreation\CS\Command.cs	58	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	ScheduleCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleCreation\CS\Command.cs	59	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ScheduleCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleCreation\CS\ScheduleCreationUtility.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ScheduleCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleCreation\CS\ScheduleCreationUtility.cs	28	Active
Error	CS0246	The type or namespace name 'BuiltInParameter' could not be found (are you missing a using directive or an assembly reference?)	ScheduleCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleCreation\CS\ScheduleCreationUtility.cs	37	Active
Error	CS0246	The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)	ScheduleCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleCreation\CS\ScheduleCreationUtility.cs	43	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	ScheduleCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleCreation\CS\ScheduleCreationUtility.cs	63	Active
Error	CS0246	The type or namespace name 'ViewSchedule' could not be found (are you missing a using directive or an assembly reference?)	ScheduleCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleCreation\CS\ScheduleCreationUtility.cs	63	Active
Error	CS0246	The type or namespace name 'ViewSchedule' could not be found (are you missing a using directive or an assembly reference?)	ScheduleCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleCreation\CS\ScheduleCreationUtility.cs	114	Active
Error	CS0246	The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)	ScheduleCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleCreation\CS\ScheduleCreationUtility.cs	114	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	ScheduleCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleCreation\CS\ScheduleCreationUtility.cs	195	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ScheduleToHTML	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleToHTML\CS\Application.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ScheduleToHTML	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleToHTML\CS\Application.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ScheduleToHTML	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleToHTML\CS\Application.cs	34	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ScheduleToHTML	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleToHTML\CS\Application.cs	35	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ScheduleToHTML	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleToHTML\CS\Application.cs	36	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ScheduleToHTML	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleToHTML\CS\Application.cs	43	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	ScheduleToHTML	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleToHTML\CS\Application.cs	43	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ScheduleToHTML	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleToHTML\CS\Application.cs	44	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	ScheduleToHTML	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleToHTML\CS\Application.cs	44	Active
Error	CS0246	The type or namespace name 'IExternalApplication' could not be found (are you missing a using directive or an assembly reference?)	ScheduleToHTML	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleToHTML\CS\Application.cs	45	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	ScheduleToHTML	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleToHTML\CS\Application.cs	53	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	ScheduleToHTML	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleToHTML\CS\Application.cs	53	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	ScheduleToHTML	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleToHTML\CS\Application.cs	63	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	ScheduleToHTML	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleToHTML\CS\Application.cs	63	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	ScheduleToHTML	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleToHTML\CS\Application.cs	75	Active
Error	CS0246	The type or namespace name 'PushButton' could not be found (are you missing a using directive or an assembly reference?)	ScheduleToHTML	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleToHTML\CS\Application.cs	94	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ScheduleToHTML	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleToHTML\CS\ScheduleHTMLExportCommand.cs	1	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ScheduleToHTML	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleToHTML\CS\ScheduleHTMLExportCommand.cs	2	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ScheduleToHTML	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleToHTML\CS\ScheduleHTMLExportCommand.cs	9	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	ScheduleToHTML	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleToHTML\CS\ScheduleHTMLExportCommand.cs	9	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	ScheduleToHTML	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleToHTML\CS\ScheduleHTMLExportCommand.cs	10	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	ScheduleToHTML	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleToHTML\CS\ScheduleHTMLExportCommand.cs	21	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	ScheduleToHTML	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleToHTML\CS\ScheduleHTMLExportCommand.cs	21	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ScheduleToHTML	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleToHTML\CS\ScheduleHTMLExportCommand.cs	21	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ScheduleToHTML	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleToHTML\CS\ScheduleHTMLExporter.cs	5	Active
Error	CS0246	The type or namespace name 'ViewSchedule' could not be found (are you missing a using directive or an assembly reference?)	ScheduleToHTML	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleToHTML\CS\ScheduleHTMLExporter.cs	18	Active
Error	CS0246	The type or namespace name 'Color' could not be found (are you missing a using directive or an assembly reference?)	ScheduleToHTML	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleToHTML\CS\ScheduleHTMLExporter.cs	131	Active
Error	CS0246	The type or namespace name 'Color' could not be found (are you missing a using directive or an assembly reference?)	ScheduleToHTML	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleToHTML\CS\ScheduleHTMLExporter.cs	139	Active
Error	CS0246	The type or namespace name 'Color' could not be found (are you missing a using directive or an assembly reference?)	ScheduleToHTML	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleToHTML\CS\ScheduleHTMLExporter.cs	150	Active
Error	CS0246	The type or namespace name 'Color' could not be found (are you missing a using directive or an assembly reference?)	ScheduleToHTML	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleToHTML\CS\ScheduleHTMLExporter.cs	164	Active
Error	CS0246	The type or namespace name 'Color' could not be found (are you missing a using directive or an assembly reference?)	ScheduleToHTML	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleToHTML\CS\ScheduleHTMLExporter.cs	164	Active
Error	CS0246	The type or namespace name 'HorizontalAlignmentStyle' could not be found (are you missing a using directive or an assembly reference?)	ScheduleToHTML	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleToHTML\CS\ScheduleHTMLExporter.cs	174	Active
Error	CS0246	The type or namespace name 'SectionType' could not be found (are you missing a using directive or an assembly reference?)	ScheduleToHTML	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleToHTML\CS\ScheduleHTMLExporter.cs	216	Active
Error	CS0246	The type or namespace name 'TableSectionData' could not be found (are you missing a using directive or an assembly reference?)	ScheduleToHTML	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleToHTML\CS\ScheduleHTMLExporter.cs	216	Active
Error	CS0246	The type or namespace name 'ViewSchedule' could not be found (are you missing a using directive or an assembly reference?)	ScheduleToHTML	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleToHTML\CS\ScheduleHTMLExporter.cs	341	Active
Error	CS0246	The type or namespace name 'TableSectionData' could not be found (are you missing a using directive or an assembly reference?)	ScheduleToHTML	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleToHTML\CS\ScheduleHTMLExporter.cs	346	Active
Error	CS0246	The type or namespace name 'TableSectionData' could not be found (are you missing a using directive or an assembly reference?)	ScheduleToHTML	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleToHTML\CS\ScheduleHTMLExporter.cs	351	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Selections	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Selections	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Selections	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Selections	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Selections	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Selections	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs	34	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Selections	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs	36	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Selections	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs	37	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Selections	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs	38	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Selections	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs	47	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	Selections	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs	47	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Selections	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs	48	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	Selections	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs	48	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Selections	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs	49	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	Selections	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs	49	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Selections	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs	50	Active
Error	CS0246	The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)	Selections	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs	55	Active
Error	CS0246	The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)	Selections	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs	59	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	Selections	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs	77	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Selections	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs	77	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	Selections	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs	77	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Selections	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs	122	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	Selections	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs	122	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Selections	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs	123	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	Selections	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs	123	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Selections	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs	124	Active
Error	CS0246	The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)	Selections	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs	129	Active
Error	CS0246	The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)	Selections	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs	133	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	Selections	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs	151	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Selections	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs	151	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	Selections	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs	151	Active
Error	CS0246	The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)	Selections	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs	219	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Selections	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs	234	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	Selections	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs	234	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Selections	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs	235	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	Selections	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs	235	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Selections	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs	236	Active
Error	CS0246	The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)	Selections	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs	241	Active
Error	CS0246	The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)	Selections	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs	245	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	Selections	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs	267	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Selections	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs	267	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	Selections	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs	267	Active
Error	CS0246	The type or namespace name 'SketchPlane' could not be found (are you missing a using directive or an assembly reference?)	Selections	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs	325	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Selections	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs	325	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Selections	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs	325	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Selections	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs	345	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	Selections	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs	345	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Selections	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs	346	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	Selections	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs	346	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Selections	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs	347	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	Selections	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs	365	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Selections	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs	365	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	Selections	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs	365	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Selections	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\SelectionFilters.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Selections	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\SelectionFilters.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Selections	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\SelectionFilters.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Selections	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\SelectionFilters.cs	31	Active
Error	CS0246	The type or namespace name 'ISelectionFilter' could not be found (are you missing a using directive or an assembly reference?)	Selections	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\SelectionFilters.cs	39	Active
Error	CS0246	The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)	Selections	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\SelectionFilters.cs	46	Active
Error	CS0246	The type or namespace name 'Reference' could not be found (are you missing a using directive or an assembly reference?)	Selections	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\SelectionFilters.cs	57	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	Selections	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\SelectionFilters.cs	57	Active
Error	CS0246	The type or namespace name 'ISelectionFilter' could not be found (are you missing a using directive or an assembly reference?)	Selections	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\SelectionFilters.cs	67	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	Selections	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\SelectionFilters.cs	70	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	Selections	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\SelectionFilters.cs	76	Active
Error	CS0246	The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)	Selections	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\SelectionFilters.cs	86	Active
Error	CS0246	The type or namespace name 'Reference' could not be found (are you missing a using directive or an assembly reference?)	Selections	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\SelectionFilters.cs	97	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	Selections	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\SelectionFilters.cs	97	Active
Error	CS0246	The type or namespace name 'ISelectionFilter' could not be found (are you missing a using directive or an assembly reference?)	Selections	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\SelectionFilters.cs	108	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	Selections	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\SelectionFilters.cs	111	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	Selections	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\SelectionFilters.cs	117	Active
Error	CS0246	The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)	Selections	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\SelectionFilters.cs	127	Active
Error	CS0246	The type or namespace name 'Reference' could not be found (are you missing a using directive or an assembly reference?)	Selections	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\SelectionFilters.cs	138	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	Selections	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\SelectionFilters.cs	138	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Selections	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\SelectionManager.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Selections	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\SelectionManager.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Selections	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\SelectionManager.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Selections	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\SelectionManager.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Selections	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\SelectionManager.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Selections	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\SelectionManager.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Selections	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\SelectionManager.cs	33	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	Selections	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\SelectionManager.cs	68	Active
Error	CS0246	The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)	Selections	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\SelectionManager.cs	72	Active
Error	CS0246	The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)	Selections	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\SelectionManager.cs	76	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Selections	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\SelectionManager.cs	80	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	Selections	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\SelectionManager.cs	84	Active
Error	CS0246	The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)	Selections	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\SelectionManager.cs	102	Active
Error	CS0246	The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)	Selections	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\SelectionManager.cs	106	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	Selections	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\SelectionManager.cs	118	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	Selections	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\SelectionManager.cs	123	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	Selections	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\SelectionManager.cs	143	Active
Error	CS0246	The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)	Selections	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\SelectionManager.cs	224	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	Selections	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\SelectionManager.cs	224	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ShaftHolePuncher	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\Command.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ShaftHolePuncher	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\Command.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ShaftHolePuncher	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\Command.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ShaftHolePuncher	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\Command.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ShaftHolePuncher	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\Command.cs	37	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	ShaftHolePuncher	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\Command.cs	37	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ShaftHolePuncher	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\Command.cs	38	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	ShaftHolePuncher	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\Command.cs	38	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ShaftHolePuncher	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\Command.cs	39	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	ShaftHolePuncher	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\Command.cs	39	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	ShaftHolePuncher	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\Command.cs	40	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ShaftHolePuncher	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\Command.cs	59	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	ShaftHolePuncher	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\Command.cs	59	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ShaftHolePuncher	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\Command.cs	60	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ShaftHolePuncher	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\MathTools.cs	25	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ShaftHolePuncher	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\MathTools.cs	114	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ShaftHolePuncher	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\Profile.cs	25	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ShaftHolePuncher	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\Profile.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ShaftHolePuncher	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\Profile.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ShaftHolePuncher	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\Profile.cs	28	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	ShaftHolePuncher	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\Profile.cs	42	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ShaftHolePuncher	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\Profile.cs	45	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ShaftHolePuncher	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\Profile.cs	48	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ShaftHolePuncher	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\Profile.cs	51	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	ShaftHolePuncher	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\Profile.cs	76	Active
Error	CS0246	The type or namespace name 'Opening' could not be found (are you missing a using directive or an assembly reference?)	ShaftHolePuncher	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\Profile.cs	88	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	ShaftHolePuncher	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\Profile.cs	95	Active
Error	CS0246	The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)	ShaftHolePuncher	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\Profile.cs	95	Active
Error	CS0246	The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)	ShaftHolePuncher	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\Profile.cs	146	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ShaftHolePuncher	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\Profile.cs	146	Active
Error	CS0246	The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)	ShaftHolePuncher	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\Profile.cs	189	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ShaftHolePuncher	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\ProfileBeam.cs	25	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ShaftHolePuncher	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\ProfileBeam.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ShaftHolePuncher	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\ProfileBeam.cs	27	Active
Error	CS0246	The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)	ShaftHolePuncher	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\ProfileBeam.cs	39	Active
Error	CS0246	The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)	ShaftHolePuncher	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\ProfileBeam.cs	41	Active
Error	CS0246	The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)	ShaftHolePuncher	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\ProfileBeam.cs	55	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	ShaftHolePuncher	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\ProfileBeam.cs	55	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	ShaftHolePuncher	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\ProfileBeam.cs	70	Active
Error	CS0246	The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)	ShaftHolePuncher	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\ProfileBeam.cs	70	Active
Error	CS0246	The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)	ShaftHolePuncher	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\ProfileBeam.cs	185	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ShaftHolePuncher	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\ProfileBeam.cs	185	Active
Error	CS0246	The type or namespace name 'Opening' could not be found (are you missing a using directive or an assembly reference?)	ShaftHolePuncher	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\ProfileBeam.cs	265	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ShaftHolePuncher	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\ProfileFloor.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ShaftHolePuncher	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\ProfileFloor.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ShaftHolePuncher	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\ProfileFloor.cs	28	Active
Error	CS0246	The type or namespace name 'Floor' could not be found (are you missing a using directive or an assembly reference?)	ShaftHolePuncher	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\ProfileFloor.cs	40	Active
Error	CS0246	The type or namespace name 'Floor' could not be found (are you missing a using directive or an assembly reference?)	ShaftHolePuncher	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\ProfileFloor.cs	47	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	ShaftHolePuncher	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\ProfileFloor.cs	47	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	ShaftHolePuncher	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\ProfileFloor.cs	62	Active
Error	CS0246	The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)	ShaftHolePuncher	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\ProfileFloor.cs	62	Active
Error	CS0246	The type or namespace name 'Opening' could not be found (are you missing a using directive or an assembly reference?)	ShaftHolePuncher	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\ProfileFloor.cs	107	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ShaftHolePuncher	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\ProfileNull.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ShaftHolePuncher	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\ProfileNull.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ShaftHolePuncher	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\ProfileNull.cs	28	Active
Error	CS0246	The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)	ShaftHolePuncher	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\ProfileNull.cs	41	Active
Error	CS0246	The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)	ShaftHolePuncher	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\ProfileNull.cs	42	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	ShaftHolePuncher	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\ProfileNull.cs	64	Active
Error	CS0246	The type or namespace name 'Opening' could not be found (are you missing a using directive or an assembly reference?)	ShaftHolePuncher	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\ProfileNull.cs	180	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ShaftHolePuncher	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\ProfileWall.cs	25	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ShaftHolePuncher	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\ProfileWall.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ShaftHolePuncher	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\ProfileWall.cs	27	Active
Error	CS0246	The type or namespace name 'Wall' could not be found (are you missing a using directive or an assembly reference?)	ShaftHolePuncher	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\ProfileWall.cs	39	Active
Error	CS0246	The type or namespace name 'Wall' could not be found (are you missing a using directive or an assembly reference?)	ShaftHolePuncher	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\ProfileWall.cs	46	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	ShaftHolePuncher	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\ProfileWall.cs	46	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	ShaftHolePuncher	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\ProfileWall.cs	61	Active
Error	CS0246	The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)	ShaftHolePuncher	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\ProfileWall.cs	61	Active
Error	CS0246	The type or namespace name 'Opening' could not be found (are you missing a using directive or an assembly reference?)	ShaftHolePuncher	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\ProfileWall.cs	151	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ShaftHolePuncher	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\ShaftHolePuncherForm.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ShaftHolePuncher	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\ShaftHolePuncherForm.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SharedCoordinateSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SharedCoordinateSystem\CS\Command.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SharedCoordinateSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SharedCoordinateSystem\CS\Command.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SharedCoordinateSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SharedCoordinateSystem\CS\Command.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SharedCoordinateSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SharedCoordinateSystem\CS\Command.cs	37	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	SharedCoordinateSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SharedCoordinateSystem\CS\Command.cs	37	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SharedCoordinateSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SharedCoordinateSystem\CS\Command.cs	38	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	SharedCoordinateSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SharedCoordinateSystem\CS\Command.cs	38	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SharedCoordinateSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SharedCoordinateSystem\CS\Command.cs	39	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	SharedCoordinateSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SharedCoordinateSystem\CS\Command.cs	39	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	SharedCoordinateSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SharedCoordinateSystem\CS\Command.cs	40	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SharedCoordinateSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SharedCoordinateSystem\CS\Command.cs	59	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	SharedCoordinateSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SharedCoordinateSystem\CS\Command.cs	59	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SharedCoordinateSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SharedCoordinateSystem\CS\Command.cs	60	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SharedCoordinateSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SharedCoordinateSystem\CS\CoordinateSystemData.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SharedCoordinateSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SharedCoordinateSystem\CS\CoordinateSystemData.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SharedCoordinateSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SharedCoordinateSystem\CS\CoordinateSystemData.cs	31	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	SharedCoordinateSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SharedCoordinateSystem\CS\CoordinateSystemData.cs	40	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SharedCoordinateSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SharedCoordinateSystem\CS\CoordinateSystemData.cs	41	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	SharedCoordinateSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SharedCoordinateSystem\CS\CoordinateSystemData.cs	127	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SharedCoordinateSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SharedCoordinateSystem\CS\CoordinateSystemDataForm.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SharedCoordinateSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SharedCoordinateSystem\CS\CoordinateSystemDataForm.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SharedCoordinateSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SharedCoordinateSystem\CS\CoordinateSystemDataForm.cs	33	Active
Error	CS0246	The type or namespace name 'SiteLocation' could not be found (are you missing a using directive or an assembly reference?)	SharedCoordinateSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SharedCoordinateSystem\CS\CoordinateSystemDataForm.cs	51	Active
Error	CS0246	The type or namespace name 'CitySet' could not be found (are you missing a using directive or an assembly reference?)	SharedCoordinateSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SharedCoordinateSystem\CS\CoordinateSystemDataForm.cs	85	Active
Error	CS0246	The type or namespace name 'SiteLocation' could not be found (are you missing a using directive or an assembly reference?)	SharedCoordinateSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SharedCoordinateSystem\CS\CoordinateSystemDataForm.cs	85	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SharedCoordinateSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SharedCoordinateSystem\CS\DuplicateForm.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SharedCoordinateSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SharedCoordinateSystem\CS\PlaceInfo.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SharedCoordinateSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SharedCoordinateSystem\CS\PlaceInfo.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SharedCoordinateSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SharedCoordinateSystem\CS\PlaceInfo.cs	33	Active
Error	CS0246	The type or namespace name 'CitySet' could not be found (are you missing a using directive or an assembly reference?)	SharedCoordinateSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SharedCoordinateSystem\CS\PlaceInfo.cs	277	Active
Error	CS0246	The type or namespace name 'CitySet' could not be found (are you missing a using directive or an assembly reference?)	SharedCoordinateSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SharedCoordinateSystem\CS\PlaceInfo.cs	287	Active
Error	CS0246	The type or namespace name 'CitySet' could not be found (are you missing a using directive or an assembly reference?)	SharedCoordinateSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SharedCoordinateSystem\CS\PlaceInfo.cs	493	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SinePlotter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SinePlotter\CS\Application.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SinePlotter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SinePlotter\CS\Application.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SinePlotter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SinePlotter\CS\Application.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SinePlotter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SinePlotter\CS\Application.cs	39	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	SinePlotter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SinePlotter\CS\Application.cs	39	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SinePlotter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SinePlotter\CS\Application.cs	40	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	SinePlotter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SinePlotter\CS\Application.cs	40	Active
Error	CS0246	The type or namespace name 'IExternalApplication' could not be found (are you missing a using directive or an assembly reference?)	SinePlotter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SinePlotter\CS\Application.cs	41	Active
Error	CS0246	The type or namespace name 'ComboBox' could not be found (are you missing a using directive or an assembly reference?)	SinePlotter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SinePlotter\CS\Application.cs	51	Active
Error	CS0246	The type or namespace name 'TextBox' could not be found (are you missing a using directive or an assembly reference?)	SinePlotter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SinePlotter\CS\Application.cs	53	Active
Error	CS0246	The type or namespace name 'TextBox' could not be found (are you missing a using directive or an assembly reference?)	SinePlotter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SinePlotter\CS\Application.cs	54	Active
Error	CS0246	The type or namespace name 'TextBox' could not be found (are you missing a using directive or an assembly reference?)	SinePlotter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SinePlotter\CS\Application.cs	55	Active
Error	CS0246	The type or namespace name 'TextBox' could not be found (are you missing a using directive or an assembly reference?)	SinePlotter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SinePlotter\CS\Application.cs	56	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	SinePlotter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SinePlotter\CS\Application.cs	65	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	SinePlotter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SinePlotter\CS\Application.cs	65	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	SinePlotter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SinePlotter\CS\Application.cs	76	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	SinePlotter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SinePlotter\CS\Application.cs	76	Active
Error	CS0246	The type or namespace name 'RibbonPanel' could not be found (are you missing a using directive or an assembly reference?)	SinePlotter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SinePlotter\CS\Application.cs	159	Active
Error	CS0246	The type or namespace name 'RibbonPanel' could not be found (are you missing a using directive or an assembly reference?)	SinePlotter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SinePlotter\CS\Application.cs	187	Active
Error	CS0246	The type or namespace name 'RibbonPanel' could not be found (are you missing a using directive or an assembly reference?)	SinePlotter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SinePlotter\CS\Application.cs	229	Active
Error	CS0246	The type or namespace name 'RibbonPanel' could not be found (are you missing a using directive or an assembly reference?)	SinePlotter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SinePlotter\CS\Application.cs	248	Active
Error	CS0246	The type or namespace name 'RibbonPanel' could not be found (are you missing a using directive or an assembly reference?)	SinePlotter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SinePlotter\CS\Application.cs	257	Active
Error	CS0246	The type or namespace name 'TextBox' could not be found (are you missing a using directive or an assembly reference?)	SinePlotter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SinePlotter\CS\Application.cs	257	Active
Error	CS0246	The type or namespace name 'TextBoxEnterPressedEventArgs' could not be found (are you missing a using directive or an assembly reference?)	SinePlotter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SinePlotter\CS\Application.cs	281	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SinePlotter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SinePlotter\CS\Command.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SinePlotter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SinePlotter\CS\Command.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SinePlotter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SinePlotter\CS\Command.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SinePlotter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SinePlotter\CS\Command.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SinePlotter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SinePlotter\CS\Command.cs	37	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	SinePlotter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SinePlotter\CS\Command.cs	37	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SinePlotter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SinePlotter\CS\Command.cs	38	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	SinePlotter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SinePlotter\CS\Command.cs	38	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	SinePlotter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SinePlotter\CS\Command.cs	39	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	SinePlotter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SinePlotter\CS\Command.cs	57	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	SinePlotter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SinePlotter\CS\Command.cs	57	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	SinePlotter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SinePlotter\CS\Command.cs	58	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SinePlotter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SinePlotter\CS\FamilyInstancePlotter.cs	24	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SinePlotter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SinePlotter\CS\FamilyInstancePlotter.cs	25	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SinePlotter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SinePlotter\CS\FamilyInstancePlotter.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SinePlotter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SinePlotter\CS\FamilyInstancePlotter.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SinePlotter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SinePlotter\CS\FamilyInstancePlotter.cs	28	Active
Error	CS0246	The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)	SinePlotter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SinePlotter\CS\FamilyInstancePlotter.cs	37	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	SinePlotter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SinePlotter\CS\FamilyInstancePlotter.cs	38	Active
Error	CS0246	The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)	SinePlotter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SinePlotter\CS\FamilyInstancePlotter.cs	46	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	SinePlotter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SinePlotter\CS\FamilyInstancePlotter.cs	46	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	SinePlotter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SinePlotter\CS\FamilyInstancePlotter.cs	57	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\Application.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\Application.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\Application.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\Application.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\Application.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\Application.cs	42	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\Application.cs	42	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\Application.cs	43	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\Application.cs	43	Active
Error	CS0246	The type or namespace name 'IExternalApplication' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\Application.cs	44	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\Application.cs	52	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\Application.cs	52	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\Application.cs	62	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\Application.cs	62	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\Application.cs	70	Active
Error	CS0246	The type or namespace name 'PushButtonData' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\Application.cs	114	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteAddRetainingPondCommand.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteAddRetainingPondCommand.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteAddRetainingPondCommand.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteAddRetainingPondCommand.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteAddRetainingPondCommand.cs	39	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteAddRetainingPondCommand.cs	39	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteAddRetainingPondCommand.cs	40	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteAddRetainingPondCommand.cs	51	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteAddRetainingPondCommand.cs	51	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteAddRetainingPondCommand.cs	51	Active
Error	CS0246	The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteAddRetainingPondCommand.cs	63	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteDeleteRegionAndPointsCommand.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteDeleteRegionAndPointsCommand.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteDeleteRegionAndPointsCommand.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteDeleteRegionAndPointsCommand.cs	36	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteDeleteRegionAndPointsCommand.cs	36	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteDeleteRegionAndPointsCommand.cs	37	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteDeleteRegionAndPointsCommand.cs	47	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteDeleteRegionAndPointsCommand.cs	47	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteDeleteRegionAndPointsCommand.cs	47	Active
Error	CS0246	The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteDeleteRegionAndPointsCommand.cs	58	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteEditingUtils.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteEditingUtils.cs	28	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteEditingUtils.cs	43	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteEditingUtils.cs	43	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteEditingUtils.cs	53	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteEditingUtils.cs	68	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteEditingUtils.cs	68	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteEditingUtils.cs	90	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteEditingUtils.cs	90	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteEditingUtils.cs	104	Active
Error	CS0246	The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteEditingUtils.cs	104	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteEditingUtils.cs	116	Active
Error	CS0246	The type or namespace name 'TopographySurface' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteEditingUtils.cs	116	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteEditingUtils.cs	134	Active
Error	CS0246	The type or namespace name 'TopographySurface' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteEditingUtils.cs	134	Active
Error	CS0246	The type or namespace name 'TopographySurface' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteEditingUtils.cs	144	Active
Error	CS0246	The type or namespace name 'TopographySurface' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteEditingUtils.cs	144	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteEditingUtils.cs	155	Active
Error	CS0246	The type or namespace name 'TopographySurface' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteEditingUtils.cs	155	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteLowerTerrainInRegionCommand.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteLowerTerrainInRegionCommand.cs	34	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteLowerTerrainInRegionCommand.cs	34	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteLowerTerrainInRegionCommand.cs	35	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteLowerTerrainInRegionCommand.cs	46	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteLowerTerrainInRegionCommand.cs	46	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteLowerTerrainInRegionCommand.cs	46	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteMoveRegionAndPointsCommand.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteMoveRegionAndPointsCommand.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteMoveRegionAndPointsCommand.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteMoveRegionAndPointsCommand.cs	36	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteMoveRegionAndPointsCommand.cs	36	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteMoveRegionAndPointsCommand.cs	37	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteMoveRegionAndPointsCommand.cs	48	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteMoveRegionAndPointsCommand.cs	48	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteMoveRegionAndPointsCommand.cs	48	Active
Error	CS0246	The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteMoveRegionAndPointsCommand.cs	60	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteNormalizeTerrainInRegionCommand.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteNormalizeTerrainInRegionCommand.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteNormalizeTerrainInRegionCommand.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteNormalizeTerrainInRegionCommand.cs	36	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteNormalizeTerrainInRegionCommand.cs	36	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteNormalizeTerrainInRegionCommand.cs	37	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteNormalizeTerrainInRegionCommand.cs	48	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteNormalizeTerrainInRegionCommand.cs	48	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteNormalizeTerrainInRegionCommand.cs	48	Active
Error	CS0246	The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteNormalizeTerrainInRegionCommand.cs	61	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteRaiseTerrainInRegionCommand.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteRaiseTerrainInRegionCommand.cs	34	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteRaiseTerrainInRegionCommand.cs	34	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteRaiseTerrainInRegionCommand.cs	35	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteRaiseTerrainInRegionCommand.cs	46	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteRaiseTerrainInRegionCommand.cs	46	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteRaiseTerrainInRegionCommand.cs	46	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteUIUtils.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteUIUtils.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteUIUtils.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteUIUtils.cs	30	Active
Error	CS0246	The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteUIUtils.cs	44	Active
Error	CS0246	The type or namespace name 'TopographySurface' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteUIUtils.cs	83	Active
Error	CS0246	The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteUIUtils.cs	83	Active
Error	CS0246	The type or namespace name 'TopographySurface' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteUIUtils.cs	98	Active
Error	CS0246	The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteUIUtils.cs	98	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteUIUtils.cs	115	Active
Error	CS0246	The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteUIUtils.cs	115	Active
Error	CS0246	The type or namespace name 'TopographySurface' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteUIUtils.cs	115	Active
Error	CS0246	The type or namespace name 'ISelectionFilter' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteUIUtils.cs	135	Active
Error	CS0246	The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteUIUtils.cs	142	Active
Error	CS0246	The type or namespace name 'Reference' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteUIUtils.cs	155	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteUIUtils.cs	155	Active
Error	CS0246	The type or namespace name 'ISelectionFilter' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteUIUtils.cs	164	Active
Error	CS0246	The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteUIUtils.cs	171	Active
Error	CS0246	The type or namespace name 'Reference' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteUIUtils.cs	184	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteUIUtils.cs	184	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\TopographyEditFailuresPreprocessor.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\TopographyEditFailuresPreprocessor.cs	28	Active
Error	CS0246	The type or namespace name 'IFailuresPreprocessor' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\TopographyEditFailuresPreprocessor.cs	32	Active
Error	CS0246	The type or namespace name 'FailureProcessingResult' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\TopographyEditFailuresPreprocessor.cs	34	Active
Error	CS0246	The type or namespace name 'FailuresAccessor' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\TopographyEditFailuresPreprocessor.cs	34	Active
Error	CS0246	The type or namespace name 'IFailuresPreprocessor' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\TopographyEditFailuresPreprocessor.cs	41	Active
Error	CS0246	The type or namespace name 'FailureProcessingResult' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\TopographyEditFailuresPreprocessor.cs	44	Active
Error	CS0246	The type or namespace name 'FailuresAccessor' could not be found (are you missing a using directive or an assembly reference?)	Site	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\TopographyEditFailuresPreprocessor.cs	44	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SlabProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabProperties\CS\Command.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SlabProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabProperties\CS\Command.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SlabProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabProperties\CS\Command.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SlabProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabProperties\CS\Command.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SlabProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabProperties\CS\Command.cs	38	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	SlabProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabProperties\CS\Command.cs	38	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SlabProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabProperties\CS\Command.cs	39	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	SlabProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabProperties\CS\Command.cs	39	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SlabProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabProperties\CS\Command.cs	40	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	SlabProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabProperties\CS\Command.cs	40	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	SlabProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabProperties\CS\Command.cs	41	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	SlabProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabProperties\CS\Command.cs	55	Active
Error	CS0246	The type or namespace name 'Floor' could not be found (are you missing a using directive or an assembly reference?)	SlabProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabProperties\CS\Command.cs	56	Active
Error	CS0246	The type or namespace name 'CompoundStructureLayer' could not be found (are you missing a using directive or an assembly reference?)	SlabProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabProperties\CS\Command.cs	57	Active
Error	CS0246	The type or namespace name 'CompoundStructureLayer' could not be found (are you missing a using directive or an assembly reference?)	SlabProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabProperties\CS\Command.cs	58	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	SlabProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabProperties\CS\Command.cs	59	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SlabProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabProperties\CS\Command.cs	91	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SlabProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabProperties\CS\Command.cs	91	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SlabProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabProperties\CS\Command.cs	91	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SlabProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabProperties\CS\Command.cs	295	Active
Error	BC40056	Namespace or type specified in the Imports 'Autodesk.Revit' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.	SlabProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabProperties\VB.NET\Command.vb	27	Active
Error	BC40056	Namespace or type specified in the Imports 'Autodesk.Revit.DB' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.	SlabProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabProperties\VB.NET\Command.vb	28	Active
Error	BC40056	Namespace or type specified in the Imports 'Autodesk.Revit.UI' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.	SlabProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabProperties\VB.NET\Command.vb	29	Active
Error	BC40056	Namespace or type specified in the Imports 'Autodesk.Revit.DB.Structure' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.	SlabProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabProperties\VB.NET\Command.vb	30	Active
Error	BC30002	Type 'Autodesk.Revit.Attributes.Transaction' is not defined.	SlabProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabProperties\VB.NET\Command.vb	38	Active
Error	BC30451	'Autodesk' is not declared. It may be inaccessible due to its protection level.	SlabProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabProperties\VB.NET\Command.vb	38	Active
Error	BC30002	Type 'Autodesk.Revit.Attributes.Regeneration' is not defined.	SlabProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabProperties\VB.NET\Command.vb	39	Active
Error	BC30451	'Autodesk' is not declared. It may be inaccessible due to its protection level.	SlabProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabProperties\VB.NET\Command.vb	39	Active
Error	BC30002	Type 'Autodesk.Revit.Attributes.Journaling' is not defined.	SlabProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabProperties\VB.NET\Command.vb	40	Active
Error	BC30451	'Autodesk' is not declared. It may be inaccessible due to its protection level.	SlabProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabProperties\VB.NET\Command.vb	40	Active
Error	BC30002	Type 'IExternalCommand' is not defined.	SlabProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabProperties\VB.NET\Command.vb	42	Active
Error	BC30002	Type 'Autodesk.Revit.DB.ElementSet' is not defined.	SlabProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabProperties\VB.NET\Command.vb	50	Active
Error	BC30002	Type 'Autodesk.Revit.DB.Floor' is not defined.	SlabProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabProperties\VB.NET\Command.vb	51	Active
Error	BC30002	Type 'Autodesk.Revit.DB.CompoundStructureLayer' is not defined.	SlabProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabProperties\VB.NET\Command.vb	52	Active
Error	BC30002	Type 'Autodesk.Revit.DB.CompoundStructureLayer' is not defined.	SlabProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabProperties\VB.NET\Command.vb	53	Active
Error	BC30002	Type 'Autodesk.Revit.DB.Document' is not defined.	SlabProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabProperties\VB.NET\Command.vb	54	Active
Error	BC30002	Type 'ExternalCommandData' is not defined.	SlabProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabProperties\VB.NET\Command.vb	82	Active
Error	BC30002	Type 'Autodesk.Revit.DB.ElementSet' is not defined.	SlabProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabProperties\VB.NET\Command.vb	82	Active
Error	BC30002	Type 'Autodesk.Revit.UI.Result' is not defined.	SlabProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabProperties\VB.NET\Command.vb	83	Active
Error	BC30002	Type 'IExternalCommand' is not defined.	SlabProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabProperties\VB.NET\Command.vb	83	Active
Error	BC30002	Type 'Autodesk.Revit.UI.UIApplication' is not defined.	SlabProperties	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabProperties\VB.NET\Command.vb	286	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SlabShapeEditing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabShapeEditing\CS\Command.cs	25	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SlabShapeEditing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabShapeEditing\CS\Command.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SlabShapeEditing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabShapeEditing\CS\Command.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SlabShapeEditing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabShapeEditing\CS\Command.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SlabShapeEditing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabShapeEditing\CS\Command.cs	37	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	SlabShapeEditing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabShapeEditing\CS\Command.cs	37	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SlabShapeEditing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabShapeEditing\CS\Command.cs	38	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	SlabShapeEditing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabShapeEditing\CS\Command.cs	38	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SlabShapeEditing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabShapeEditing\CS\Command.cs	39	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	SlabShapeEditing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabShapeEditing\CS\Command.cs	39	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	SlabShapeEditing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabShapeEditing\CS\Command.cs	40	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SlabShapeEditing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabShapeEditing\CS\Command.cs	59	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	SlabShapeEditing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabShapeEditing\CS\Command.cs	59	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SlabShapeEditing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabShapeEditing\CS\Command.cs	60	Active
Error	CS0246	The type or namespace name 'Floor' could not be found (are you missing a using directive or an assembly reference?)	SlabShapeEditing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabShapeEditing\CS\Command.cs	81	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	SlabShapeEditing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabShapeEditing\CS\Command.cs	81	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SlabShapeEditing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabShapeEditing\CS\MathTools.cs	25	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SlabShapeEditing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabShapeEditing\CS\MathTools.cs	114	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SlabShapeEditing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabShapeEditing\CS\SlabProfile.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SlabShapeEditing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabShapeEditing\CS\SlabProfile.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SlabShapeEditing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabShapeEditing\CS\SlabProfile.cs	29	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	SlabShapeEditing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabShapeEditing\CS\SlabProfile.cs	42	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SlabShapeEditing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabShapeEditing\CS\SlabProfile.cs	44	Active
Error	CS0246	The type or namespace name 'EdgeArray' could not be found (are you missing a using directive or an assembly reference?)	SlabShapeEditing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabShapeEditing\CS\SlabProfile.cs	46	Active
Error	CS0246	The type or namespace name 'SlabShapeEditor' could not be found (are you missing a using directive or an assembly reference?)	SlabShapeEditing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabShapeEditing\CS\SlabProfile.cs	68	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SlabShapeEditing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabShapeEditing\CS\SlabProfile.cs	81	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	SlabShapeEditing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabShapeEditing\CS\SlabProfile.cs	81	Active
Error	CS0246	The type or namespace name 'EdgeArray' could not be found (are you missing a using directive or an assembly reference?)	SlabShapeEditing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabShapeEditing\CS\SlabProfile.cs	116	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	SlabShapeEditing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabShapeEditing\CS\SlabProfile.cs	294	Active
Error	CS0246	The type or namespace name 'SlabShapeVertex' could not be found (are you missing a using directive or an assembly reference?)	SlabShapeEditing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabShapeEditing\CS\SlabProfile.cs	363	Active
Error	CS0246	The type or namespace name 'SlabShapeCrease' could not be found (are you missing a using directive or an assembly reference?)	SlabShapeEditing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabShapeEditing\CS\SlabProfile.cs	384	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SlabShapeEditing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabShapeEditing\CS\SlabShapeEditingForm.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SlabShapeEditing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabShapeEditing\CS\SlabShapeEditingForm.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SlabShapeEditing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabShapeEditing\CS\SlabShapeEditingForm.cs	32	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	SlabShapeEditing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabShapeEditing\CS\SlabShapeEditingForm.cs	46	Active
Error	CS0246	The type or namespace name 'SlabShapeEditor' could not be found (are you missing a using directive or an assembly reference?)	SlabShapeEditing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabShapeEditing\CS\SlabShapeEditingForm.cs	56	Active
Error	CS0246	The type or namespace name 'SlabShapeCrease' could not be found (are you missing a using directive or an assembly reference?)	SlabShapeEditing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabShapeEditing\CS\SlabShapeEditingForm.cs	57	Active
Error	CS0246	The type or namespace name 'SlabShapeVertex' could not be found (are you missing a using directive or an assembly reference?)	SlabShapeEditing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabShapeEditing\CS\SlabShapeEditingForm.cs	58	Active
Error	CS0246	The type or namespace name 'Floor' could not be found (are you missing a using directive or an assembly reference?)	SlabShapeEditing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabShapeEditing\CS\SlabShapeEditingForm.cs	71	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	SlabShapeEditing	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabShapeEditing\CS\SlabShapeEditingForm.cs	71	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SlaveSymbolGeometry	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\SlaveSymbolGeometry\CS\Command.cs	25	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SlaveSymbolGeometry	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\SlaveSymbolGeometry\CS\Command.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SlaveSymbolGeometry	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\SlaveSymbolGeometry\CS\Command.cs	35	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	SlaveSymbolGeometry	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\SlaveSymbolGeometry\CS\Command.cs	35	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SlaveSymbolGeometry	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\SlaveSymbolGeometry\CS\Command.cs	36	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	SlaveSymbolGeometry	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\SlaveSymbolGeometry\CS\Command.cs	36	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SlaveSymbolGeometry	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\SlaveSymbolGeometry\CS\Command.cs	37	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	SlaveSymbolGeometry	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\SlaveSymbolGeometry\CS\Command.cs	37	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	SlaveSymbolGeometry	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\SlaveSymbolGeometry\CS\Command.cs	38	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SlaveSymbolGeometry	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\SlaveSymbolGeometry\CS\Command.cs	57	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	SlaveSymbolGeometry	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\SlaveSymbolGeometry\CS\Command.cs	57	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SlaveSymbolGeometry	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\SlaveSymbolGeometry\CS\Command.cs	58	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SlaveSymbolGeometry	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\SlaveSymbolGeometry\CS\SlaveSymbolGeometry.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SlaveSymbolGeometry	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\SlaveSymbolGeometry\CS\SlaveSymbolGeometry.cs	28	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	SlaveSymbolGeometry	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\SlaveSymbolGeometry\CS\SlaveSymbolGeometry.cs	37	Active
Error	CS0246	The type or namespace name 'Options' could not be found (are you missing a using directive or an assembly reference?)	SlaveSymbolGeometry	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\SlaveSymbolGeometry\CS\SlaveSymbolGeometry.cs	42	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	SlaveSymbolGeometry	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\SlaveSymbolGeometry\CS\SlaveSymbolGeometry.cs	53	Active
Error	CS0246	The type or namespace name 'Solid' could not be found (are you missing a using directive or an assembly reference?)	SlaveSymbolGeometry	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\SlaveSymbolGeometry\CS\SlaveSymbolGeometry.cs	160	Active
Error	CS0246	The type or namespace name 'View' could not be found (are you missing a using directive or an assembly reference?)	SlaveSymbolGeometry	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\SlaveSymbolGeometry\CS\SlaveSymbolGeometry.cs	160	Active
Error	CS0246	The type or namespace name 'Face' could not be found (are you missing a using directive or an assembly reference?)	SlaveSymbolGeometry	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\SlaveSymbolGeometry\CS\SlaveSymbolGeometry.cs	211	Active
Error	CS0246	The type or namespace name 'UV' could not be found (are you missing a using directive or an assembly reference?)	SlaveSymbolGeometry	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\SlaveSymbolGeometry\CS\SlaveSymbolGeometry.cs	211	Active
Error	CS0246	The type or namespace name 'ValueAtPoint' could not be found (are you missing a using directive or an assembly reference?)	SlaveSymbolGeometry	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\SlaveSymbolGeometry\CS\SlaveSymbolGeometry.cs	212	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SolidSolidCut	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SolidSolidCut\CS\Command.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SolidSolidCut	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SolidSolidCut\CS\Command.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SolidSolidCut	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SolidSolidCut\CS\Command.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SolidSolidCut	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SolidSolidCut\CS\Command.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SolidSolidCut	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SolidSolidCut\CS\Command.cs	39	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	SolidSolidCut	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SolidSolidCut\CS\Command.cs	39	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SolidSolidCut	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SolidSolidCut\CS\Command.cs	40	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	SolidSolidCut	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SolidSolidCut\CS\Command.cs	40	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	SolidSolidCut	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SolidSolidCut\CS\Command.cs	41	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SolidSolidCut	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SolidSolidCut\CS\Command.cs	61	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	SolidSolidCut	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SolidSolidCut\CS\Command.cs	61	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SolidSolidCut	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SolidSolidCut\CS\Command.cs	62	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SolidSolidCut	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SolidSolidCut\CS\Command.cs	114	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	SolidSolidCut	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SolidSolidCut\CS\Command.cs	114	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SolidSolidCut	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SolidSolidCut\CS\Command.cs	115	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	SolidSolidCut	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SolidSolidCut\CS\Command.cs	115	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	SolidSolidCut	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SolidSolidCut\CS\Command.cs	116	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SolidSolidCut	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SolidSolidCut\CS\Command.cs	136	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	SolidSolidCut	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SolidSolidCut\CS\Command.cs	136	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SolidSolidCut	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SolidSolidCut\CS\Command.cs	137	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SpanDirection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpanDirection\CS\Command.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SpanDirection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpanDirection\CS\Command.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SpanDirection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpanDirection\CS\Command.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SpanDirection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpanDirection\CS\Command.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SpanDirection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpanDirection\CS\Command.cs	37	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	SpanDirection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpanDirection\CS\Command.cs	37	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SpanDirection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpanDirection\CS\Command.cs	38	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	SpanDirection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpanDirection\CS\Command.cs	38	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SpanDirection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpanDirection\CS\Command.cs	39	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	SpanDirection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpanDirection\CS\Command.cs	39	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	SpanDirection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpanDirection\CS\Command.cs	40	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	SpanDirection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpanDirection\CS\Command.cs	42	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SpanDirection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpanDirection\CS\Command.cs	60	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SpanDirection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpanDirection\CS\Command.cs	60	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SpanDirection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpanDirection\CS\Command.cs	60	Active
Error	CS0246	The type or namespace name 'Floor' could not be found (are you missing a using directive or an assembly reference?)	SpanDirection	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpanDirection\CS\Command.cs	104	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SpatialFieldGradient	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\SpatialFieldGradient\CS\Command.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SpatialFieldGradient	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\SpatialFieldGradient\CS\Command.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SpatialFieldGradient	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\SpatialFieldGradient\CS\Command.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SpatialFieldGradient	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\SpatialFieldGradient\CS\Command.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SpatialFieldGradient	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\SpatialFieldGradient\CS\Command.cs	33	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	SpatialFieldGradient	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\SpatialFieldGradient\CS\Command.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SpatialFieldGradient	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\SpatialFieldGradient\CS\Command.cs	34	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	SpatialFieldGradient	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\SpatialFieldGradient\CS\Command.cs	34	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	SpatialFieldGradient	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\SpatialFieldGradient\CS\Command.cs	35	Active
Error	CS0246	The type or namespace name 'AddInId' could not be found (are you missing a using directive or an assembly reference?)	SpatialFieldGradient	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\SpatialFieldGradient\CS\Command.cs	37	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SpatialFieldGradient	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\SpatialFieldGradient\CS\Command.cs	38	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	SpatialFieldGradient	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\SpatialFieldGradient\CS\Command.cs	38	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	SpatialFieldGradient	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\SpatialFieldGradient\CS\Command.cs	38	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SpotDimension	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpotDimension\CS\Command.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SpotDimension	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpotDimension\CS\Command.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SpotDimension	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpotDimension\CS\Command.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SpotDimension	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpotDimension\CS\Command.cs	36	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	SpotDimension	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpotDimension\CS\Command.cs	36	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SpotDimension	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpotDimension\CS\Command.cs	37	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	SpotDimension	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpotDimension\CS\Command.cs	37	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SpotDimension	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpotDimension\CS\Command.cs	38	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	SpotDimension	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpotDimension\CS\Command.cs	38	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	SpotDimension	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpotDimension\CS\Command.cs	39	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SpotDimension	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpotDimension\CS\Command.cs	57	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SpotDimension	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpotDimension\CS\Command.cs	57	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	SpotDimension	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpotDimension\CS\Command.cs	59	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SpotDimension	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpotDimension\CS\SpotDimensionInfoDlg.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SpotDimension	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpotDimension\CS\SpotDimensionInfoDlg.cs	37	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SpotDimension	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpotDimension\CS\SpotDimensionInfoDlg.cs	38	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SpotDimension	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpotDimension\CS\SpotDimensionInfoDlg.cs	47	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	SpotDimension	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpotDimension\CS\SpotDimensionInfoDlg.cs	67	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SpotDimension	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpotDimension\CS\SpotDimensionInfoDlg.Designer.cs	38	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SpotDimension	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpotDimension\CS\SpotDimensionParams.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SpotDimension	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpotDimension\CS\SpotDimensionParams.cs	31	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	SpotDimension	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpotDimension\CS\SpotDimensionParams.cs	47	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	SpotDimension	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpotDimension\CS\SpotDimensionParams.cs	77	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SpotDimension	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpotDimension\CS\SpotDimensionParams.cs	88	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SpotDimension	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpotDimension\CS\SpotDimensionsData.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SpotDimension	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpotDimension\CS\SpotDimensionsData.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SpotDimension	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpotDimension\CS\SpotDimensionsData.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SpotDimension	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpotDimension\CS\SpotDimensionsData.cs	33	Active
Error	CS0246	The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)	SpotDimension	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpotDimension\CS\SpotDimensionsData.cs	44	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SpotDimension	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpotDimension\CS\SpotDimensionsData.cs	46	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	SpotDimension	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpotDimension\CS\SpotDimensionsData.cs	51	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	SpotDimension	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpotDimension\CS\SpotDimensionsData.cs	74	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\Command.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\Command.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\Command.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\Command.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\Command.cs	39	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\Command.cs	39	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\Command.cs	40	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\Command.cs	40	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\Command.cs	41	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\Command.cs	48	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\Command.cs	48	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\Command.cs	48	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\GeometryUtils.cs	25	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\GeometryUtils.cs	40	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\GeometryUtils.cs	40	Active
Error	CS0246	The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\GeometryUtils.cs	40	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\GeometryUtils.cs	58	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\GeometryUtils.cs	58	Active
Error	CS0246	The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\GeometryUtils.cs	58	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\IStairsConfiguration.cs	27	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\IStairsConfiguration.cs	48	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\IStairsConfiguration.cs	48	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\IStairsConfiguration.cs	62	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\IStairsConfiguration.cs	62	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\LandingComponents\IStairsLandingComponent.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\LandingComponents\IStairsLandingComponent.cs	28	Active
Error	CS0246	The type or namespace name 'CurveLoop' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\LandingComponents\IStairsLandingComponent.cs	41	Active
Error	CS0246	The type or namespace name 'StairsLanding' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\LandingComponents\IStairsLandingComponent.cs	55	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\LandingComponents\IStairsLandingComponent.cs	55	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\LandingComponents\IStairsLandingComponent.cs	55	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\LandingComponents\LandingComponentUtils.cs	25	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\LandingComponents\LandingComponentUtils.cs	41	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\LandingComponents\LandingComponentUtils.cs	41	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\LandingComponents\LandingComponentUtils.cs	58	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\LandingComponents\LandingComponentUtils.cs	58	Active
Error	CS0246	The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\LandingComponents\LandingComponentUtils.cs	72	Active
Error	CS0246	The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\LandingComponents\LandingComponentUtils.cs	72	Active
Error	CS0246	The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\LandingComponents\LandingComponentUtils.cs	72	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\LandingComponents\LandingComponentUtils.cs	101	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\LandingComponents\LandingComponentUtils.cs	101	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\LandingComponents\StairsRectangleLandingComponent.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\LandingComponents\StairsRectangleLandingComponent.cs	28	Active
Error	CS0738	'StairsRectangleLandingComponent' does not implement interface member 'IStairsLandingComponent.GetLandingBoundary()'. 'StairsRectangleLandingComponent.GetLandingBoundary()' cannot implement 'IStairsLandingComponent.GetLandingBoundary()' because it does not have the matching return type of 'CurveLoop'.	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\LandingComponents\StairsRectangleLandingComponent.cs	35	Active
Error	CS0246	The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\LandingComponents\StairsRectangleLandingComponent.cs	45	Active
Error	CS0246	The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\LandingComponents\StairsRectangleLandingComponent.cs	45	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\LandingComponents\StairsRectangleLandingComponent.cs	45	Active
Error	CS0246	The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\LandingComponents\StairsRectangleLandingComponent.cs	56	Active
Error	CS0246	The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\LandingComponents\StairsRectangleLandingComponent.cs	57	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\LandingComponents\StairsRectangleLandingComponent.cs	58	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\LandingComponents\StairsRectangleLandingComponent.cs	67	Active
Error	CS0246	The type or namespace name 'StairsLanding' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\LandingComponents\StairsRectangleLandingComponent.cs	92	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\LandingComponents\StairsRectangleLandingComponent.cs	92	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\LandingComponents\StairsRectangleLandingComponent.cs	92	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\CurvedStairsRunComponent.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\CurvedStairsRunComponent.cs	28	Active
Error	CS0738	'CurvedStairsRunComponent' does not implement interface member 'IStairsRunComponent.CreateStairsRun(Document, ElementId)'. 'CurvedStairsRunComponent.CreateStairsRun(Document, ElementId)' cannot implement 'IStairsRunComponent.CreateStairsRun(Document, ElementId)' because it does not have the matching return type of 'StairsRun'.	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\CurvedStairsRunComponent.cs	35	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\CurvedStairsRunComponent.cs	48	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\CurvedStairsRunComponent.cs	75	Active
Error	CS0246	The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\CurvedStairsRunComponent.cs	76	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\CurvedStairsRunComponent.cs	97	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\CurvedStairsRunComponent.cs	98	Active
Error	CS0246	The type or namespace name 'StairsRun' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\CurvedStairsRunComponent.cs	99	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\CurvedStairsRunComponent.cs	132	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\CurvedStairsRunComponent.cs	145	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\CurvedStairsRunComponent.cs	153	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\CurvedStairsRunComponent.cs	161	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\CurvedStairsRunComponent.cs	180	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\CurvedStairsRunComponent.cs	180	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\CurvedStairsRunComponent.cs	180	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\CurvedStairsRunComponent.cs	215	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\IStairsRunComponent.cs	25	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\IStairsRunComponent.cs	26	Active
Error	CS0246	The type or namespace name 'StairsRun' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\IStairsRunComponent.cs	42	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\IStairsRunComponent.cs	42	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\IStairsRunComponent.cs	42	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\IStairsRunComponent.cs	76	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\IStairsRunComponent.cs	84	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\IStairsRunComponent.cs	92	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\IStairsRunComponent.cs	101	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\SketchedCurvedStairsRunComponent.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\SketchedCurvedStairsRunComponent.cs	28	Active
Error	CS0738	'SketchedCurvedStairsRunComponent' does not implement interface member 'IStairsRunComponent.CreateStairsRun(Document, ElementId)'. 'SketchedCurvedStairsRunComponent.CreateStairsRun(Document, ElementId)' cannot implement 'IStairsRunComponent.CreateStairsRun(Document, ElementId)' because it does not have the matching return type of 'StairsRun'.	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\SketchedCurvedStairsRunComponent.cs	36	Active
Error	CS0738	'SketchedCurvedStairsRunComponent' does not implement interface member 'IStairsRunComponent.GetStairsPath()'. 'SketchedCurvedStairsRunComponent.GetStairsPath()' cannot implement 'IStairsRunComponent.GetStairsPath()' because it does not have the matching return type of 'IList<Curve>'.	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\SketchedCurvedStairsRunComponent.cs	36	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\SketchedCurvedStairsRunComponent.cs	50	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\SketchedCurvedStairsRunComponent.cs	78	Active
Error	CS0246	The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\SketchedCurvedStairsRunComponent.cs	79	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\SketchedCurvedStairsRunComponent.cs	101	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\SketchedCurvedStairsRunComponent.cs	102	Active
Error	CS0246	The type or namespace name 'StairsRun' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\SketchedCurvedStairsRunComponent.cs	103	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\SketchedCurvedStairsRunComponent.cs	143	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\SketchedCurvedStairsRunComponent.cs	155	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\SketchedCurvedStairsRunComponent.cs	163	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\SketchedCurvedStairsRunComponent.cs	171	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\SketchedCurvedStairsRunComponent.cs	198	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\SketchedCurvedStairsRunComponent.cs	206	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\SketchedCurvedStairsRunComponent.cs	221	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\SketchedCurvedStairsRunComponent.cs	221	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\SketchedCurvedStairsRunComponent.cs	221	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\SketchedStraightStairsRunComponent.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\SketchedStraightStairsRunComponent.cs	28	Active
Error	CS0738	'SketchedStraightStairsRunComponent' does not implement interface member 'IStairsRunComponent.CreateStairsRun(Document, ElementId)'. 'SketchedStraightStairsRunComponent.CreateStairsRun(Document, ElementId)' cannot implement 'IStairsRunComponent.CreateStairsRun(Document, ElementId)' because it does not have the matching return type of 'StairsRun'.	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\SketchedStraightStairsRunComponent.cs	35	Active
Error	CS0738	'SketchedStraightStairsRunComponent' does not implement interface member 'IStairsRunComponent.GetStairsPath()'. 'SketchedStraightStairsRunComponent.GetStairsPath()' cannot implement 'IStairsRunComponent.GetStairsPath()' because it does not have the matching return type of 'IList<Curve>'.	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\SketchedStraightStairsRunComponent.cs	35	Active
Error	CS0246	The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\SketchedStraightStairsRunComponent.cs	64	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\SketchedStraightStairsRunComponent.cs	81	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\SketchedStraightStairsRunComponent.cs	82	Active
Error	CS0246	The type or namespace name 'StairsRun' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\SketchedStraightStairsRunComponent.cs	83	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\SketchedStraightStairsRunComponent.cs	124	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\SketchedStraightStairsRunComponent.cs	139	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\SketchedStraightStairsRunComponent.cs	147	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\SketchedStraightStairsRunComponent.cs	155	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\SketchedStraightStairsRunComponent.cs	163	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\SketchedStraightStairsRunComponent.cs	171	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\SketchedStraightStairsRunComponent.cs	171	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\SketchedStraightStairsRunComponent.cs	171	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\SketchedStraightStairsRunComponent.cs	205	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\SketchedStraightStairsRunComponent.cs	228	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\StraightStairsRunComponent.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\StraightStairsRunComponent.cs	28	Active
Error	CS0738	'StraightStairsRunComponent' does not implement interface member 'IStairsRunComponent.CreateStairsRun(Document, ElementId)'. 'StraightStairsRunComponent.CreateStairsRun(Document, ElementId)' cannot implement 'IStairsRunComponent.CreateStairsRun(Document, ElementId)' because it does not have the matching return type of 'StairsRun'.	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\StraightStairsRunComponent.cs	35	Active
Error	CS0246	The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\StraightStairsRunComponent.cs	64	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\StraightStairsRunComponent.cs	79	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\StraightStairsRunComponent.cs	80	Active
Error	CS0246	The type or namespace name 'StairsRun' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\StraightStairsRunComponent.cs	81	Active
Error	CS0246	The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\StraightStairsRunComponent.cs	96	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\StraightStairsRunComponent.cs	134	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\StraightStairsRunComponent.cs	147	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\StraightStairsRunComponent.cs	155	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\StraightStairsRunComponent.cs	163	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\StraightStairsRunComponent.cs	171	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\StraightStairsRunComponent.cs	171	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\StraightStairsRunComponent.cs	171	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\StraightStairsRunComponent.cs	206	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\TransformedStairsComponent.cs	25	Active
Error	CS0246	The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\TransformedStairsComponent.cs	34	Active
Error	CS0246	The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\TransformedStairsComponent.cs	47	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\TransformedStairsComponent.cs	57	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\TransformedStairsComponent.cs	57	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\TransformedStairsComponent.cs	68	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\TransformedStairsComponent.cs	68	Active
Error	CS0246	The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\TransformedStairsComponent.cs	78	Active
Error	CS0246	The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\TransformedStairsComponent.cs	78	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\TransformedStairsComponent.cs	88	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\TransformedStairsComponent.cs	88	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsAutomationUtility.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsAutomationUtility.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsAutomationUtility.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsAutomationUtility.cs	38	Active
Error	CS0246	The type or namespace name 'Stairs' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsAutomationUtility.cs	39	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsAutomationUtility.cs	45	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsAutomationUtility.cs	50	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsAutomationUtility.cs	55	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsAutomationUtility.cs	66	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsAutomationUtility.cs	79	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsAutomationUtility.cs	91	Active
Error	CS0246	The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsAutomationUtility.cs	122	Active
Error	CS0246	The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsAutomationUtility.cs	122	Active
Error	CS0246	The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsAutomationUtility.cs	122	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsAutomationUtility.cs	122	Active
Error	CS0246	The type or namespace name 'IFailuresPreprocessor' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsAutomationUtility.cs	277	Active
Error	CS0246	The type or namespace name 'FailureProcessingResult' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsAutomationUtility.cs	279	Active
Error	CS0246	The type or namespace name 'FailuresAccessor' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsAutomationUtility.cs	279	Active
Error	CS0535	'StairsConfiguration' does not implement interface member 'IStairsConfiguration.CreateStairsRun(Document, ElementId, int)'	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsConfiguration.cs	31	Active
Error	CS0535	'StairsConfiguration' does not implement interface member 'IStairsConfiguration.CreateLanding(Document, ElementId, int)'	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsConfiguration.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsConfiguration.cs	55	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsConfiguration.cs	55	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsConfiguration.cs	71	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsConfiguration.cs	71	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsSingleCurvedRun.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsSingleCurvedRun.cs	28	Active
Error	CS0246	The type or namespace name 'Stairs' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsSingleCurvedRun.cs	44	Active
Error	CS0246	The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsSingleCurvedRun.cs	44	Active
Error	CS0246	The type or namespace name 'Stairs' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsSingleCurvedRun.cs	58	Active
Error	CS0246	The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsSingleCurvedRun.cs	58	Active
Error	CS0246	The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsSingleCurvedRun.cs	58	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsSingleSketchedCurvedRun.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsSingleSketchedCurvedRun.cs	28	Active
Error	CS0246	The type or namespace name 'Stairs' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsSingleSketchedCurvedRun.cs	44	Active
Error	CS0246	The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsSingleSketchedCurvedRun.cs	44	Active
Error	CS0246	The type or namespace name 'Stairs' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsSingleSketchedCurvedRun.cs	59	Active
Error	CS0246	The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsSingleSketchedCurvedRun.cs	59	Active
Error	CS0246	The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsSingleSketchedCurvedRun.cs	59	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsSingleSketchedStraightRun.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsSingleSketchedStraightRun.cs	28	Active
Error	CS0246	The type or namespace name 'Stairs' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsSingleSketchedStraightRun.cs	42	Active
Error	CS0246	The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsSingleSketchedStraightRun.cs	42	Active
Error	CS0246	The type or namespace name 'Stairs' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsSingleSketchedStraightRun.cs	55	Active
Error	CS0246	The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsSingleSketchedStraightRun.cs	55	Active
Error	CS0246	The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsSingleSketchedStraightRun.cs	55	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsSingleStraightRun.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsSingleStraightRun.cs	28	Active
Error	CS0246	The type or namespace name 'Stairs' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsSingleStraightRun.cs	42	Active
Error	CS0246	The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsSingleStraightRun.cs	42	Active
Error	CS0246	The type or namespace name 'Stairs' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsSingleStraightRun.cs	54	Active
Error	CS0246	The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsSingleStraightRun.cs	54	Active
Error	CS0246	The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsSingleStraightRun.cs	54	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsStandardConfiguration.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsStandardConfiguration.cs	28	Active
Error	CS0246	The type or namespace name 'Stairs' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsStandardConfiguration.cs	41	Active
Error	CS0246	The type or namespace name 'StairsType' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsStandardConfiguration.cs	42	Active
Error	CS0246	The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsStandardConfiguration.cs	44	Active
Error	CS0246	The type or namespace name 'Stairs' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsStandardConfiguration.cs	133	Active
Error	CS0246	The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsStandardConfiguration.cs	133	Active
Error	CS0246	The type or namespace name 'Stairs' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsStandardConfiguration.cs	151	Active
Error	CS0246	The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsStandardConfiguration.cs	151	Active
Error	CS0246	The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsStandardConfiguration.cs	151	Active
Error	CS0246	The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsStandardConfiguration.cs	200	Active
Error	CS0246	The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsStandardConfiguration.cs	200	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsStandardConfiguration.cs	200	Active
Error	CS0246	The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsStandardConfiguration.cs	216	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsStandardConfiguration.cs	226	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsStandardConfiguration.cs	255	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsStandardConfiguration.cs	255	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsStandardConfiguration.cs	293	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsStandardConfiguration.cs	293	Active
Error	CS0246	The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)	StairsAutomation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsStandardConfiguration.cs	336	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StructSample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructSample\CS\Command.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StructSample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructSample\CS\Command.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StructSample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructSample\CS\Command.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StructSample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructSample\CS\Command.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StructSample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructSample\CS\Command.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StructSample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructSample\CS\Command.cs	46	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	StructSample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructSample\CS\Command.cs	46	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StructSample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructSample\CS\Command.cs	47	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	StructSample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructSample\CS\Command.cs	47	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StructSample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructSample\CS\Command.cs	48	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	StructSample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructSample\CS\Command.cs	48	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	StructSample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructSample\CS\Command.cs	49	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StructSample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructSample\CS\Command.cs	68	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	StructSample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructSample\CS\Command.cs	68	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StructSample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructSample\CS\Command.cs	68	Active
Error	CS0246	The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)	StructSample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructSample\CS\Command.cs	143	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	StructSample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructSample\CS\Command.cs	143	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StructSample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructSample\CS\Command.cs	178	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StructSample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructSample\CS\Command.cs	178	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StructSample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructSample\CS\Command.cs	179	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StructSample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructSample\CS\Command.cs	239	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	StructSample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructSample\CS\Command.cs	239	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StructSample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructSample\CS\Command.cs	239	Active
Error	CS0246	The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)	StructSample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructSample\CS\Command.cs	240	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StructSample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructSample\CS\Command.cs	240	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StructSample	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructSample\CS\Command.cs	240	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StructuralLayerFunction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructuralLayerFunction\CS\Command.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StructuralLayerFunction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructuralLayerFunction\CS\Command.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StructuralLayerFunction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructuralLayerFunction\CS\Command.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StructuralLayerFunction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructuralLayerFunction\CS\Command.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StructuralLayerFunction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructuralLayerFunction\CS\Command.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StructuralLayerFunction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructuralLayerFunction\CS\Command.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StructuralLayerFunction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructuralLayerFunction\CS\Command.cs	42	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	StructuralLayerFunction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructuralLayerFunction\CS\Command.cs	42	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StructuralLayerFunction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructuralLayerFunction\CS\Command.cs	43	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	StructuralLayerFunction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructuralLayerFunction\CS\Command.cs	43	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StructuralLayerFunction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructuralLayerFunction\CS\Command.cs	44	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	StructuralLayerFunction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructuralLayerFunction\CS\Command.cs	44	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	StructuralLayerFunction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructuralLayerFunction\CS\Command.cs	45	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StructuralLayerFunction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructuralLayerFunction\CS\Command.cs	48	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StructuralLayerFunction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructuralLayerFunction\CS\Command.cs	96	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StructuralLayerFunction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructuralLayerFunction\CS\Command.cs	96	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	StructuralLayerFunction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructuralLayerFunction\CS\Command.cs	97	Active
Error	BC40056	Namespace or type specified in the Imports 'Autodesk.Revit' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.	StructuralLayerFunction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructuralLayerFunction\VB.NET\Command.vb	28	Active
Error	BC40056	Namespace or type specified in the Imports 'Autodesk.Revit.DB' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.	StructuralLayerFunction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructuralLayerFunction\VB.NET\Command.vb	29	Active
Error	BC40056	Namespace or type specified in the Imports 'Autodesk.Revit.UI' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.	StructuralLayerFunction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructuralLayerFunction\VB.NET\Command.vb	30	Active
Error	BC40056	Namespace or type specified in the Imports 'Autodesk.Revit.DB.Structure' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.	StructuralLayerFunction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructuralLayerFunction\VB.NET\Command.vb	31	Active
Error	BC30002	Type 'Autodesk.Revit.Attributes.Transaction' is not defined.	StructuralLayerFunction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructuralLayerFunction\VB.NET\Command.vb	39	Active
Error	BC30451	'Autodesk' is not declared. It may be inaccessible due to its protection level.	StructuralLayerFunction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructuralLayerFunction\VB.NET\Command.vb	39	Active
Error	BC30002	Type 'Autodesk.Revit.Attributes.Regeneration' is not defined.	StructuralLayerFunction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructuralLayerFunction\VB.NET\Command.vb	40	Active
Error	BC30451	'Autodesk' is not declared. It may be inaccessible due to its protection level.	StructuralLayerFunction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructuralLayerFunction\VB.NET\Command.vb	40	Active
Error	BC30002	Type 'Autodesk.Revit.Attributes.Journaling' is not defined.	StructuralLayerFunction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructuralLayerFunction\VB.NET\Command.vb	41	Active
Error	BC30451	'Autodesk' is not declared. It may be inaccessible due to its protection level.	StructuralLayerFunction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructuralLayerFunction\VB.NET\Command.vb	41	Active
Error	BC30002	Type 'IExternalCommand' is not defined.	StructuralLayerFunction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructuralLayerFunction\VB.NET\Command.vb	43	Active
Error	BC30002	Type 'Autodesk.Revit.DB.Floor' is not defined.	StructuralLayerFunction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructuralLayerFunction\VB.NET\Command.vb	46	Active
Error	BC30002	Type 'Autodesk.Revit.UI.ExternalCommandData' is not defined.	StructuralLayerFunction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructuralLayerFunction\VB.NET\Command.vb	77	Active
Error	BC30002	Type 'Autodesk.Revit.DB.ElementSet' is not defined.	StructuralLayerFunction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructuralLayerFunction\VB.NET\Command.vb	78	Active
Error	BC30002	Type 'Autodesk.Revit.UI.Result' is not defined.	StructuralLayerFunction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructuralLayerFunction\VB.NET\Command.vb	78	Active
Error	BC30002	Type 'Autodesk.Revit.UI.IExternalCommand' is not defined.	StructuralLayerFunction	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructuralLayerFunction\VB.NET\Command.vb	79	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	TagBeam	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TagBeam\CS\Command.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	TagBeam	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TagBeam\CS\Command.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	TagBeam	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TagBeam\CS\Command.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	TagBeam	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TagBeam\CS\Command.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	TagBeam	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TagBeam\CS\Command.cs	38	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	TagBeam	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TagBeam\CS\Command.cs	38	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	TagBeam	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TagBeam\CS\Command.cs	39	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	TagBeam	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TagBeam\CS\Command.cs	39	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	TagBeam	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TagBeam\CS\Command.cs	40	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	TagBeam	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TagBeam\CS\Command.cs	59	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	TagBeam	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TagBeam\CS\Command.cs	60	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	TagBeam	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TagBeam\CS\Command.cs	62	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	TagBeam	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TagBeam\CS\Command.cs	90	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	TagBeam	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TagBeam\CS\Command.cs	90	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	TagBeam	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TagBeam\CS\Command.cs	91	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	TagBeam	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TagBeam\CS\Command.cs	93	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	TagBeam	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TagBeam\CS\Command.cs	94	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	TagBeam	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TagBeam\CS\Command.cs	96	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	TagBeam	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TagBeam\CS\Command.cs	135	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	TagBeam	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TagBeam\CS\Command.cs	135	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	TagBeam	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TagBeam\CS\Command.cs	136	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	TagBeam	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TagBeam\CS\Command.cs	138	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	TagBeam	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TagBeam\CS\Command.cs	139	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	TagBeam	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TagBeam\CS\Command.cs	141	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	TagBeam	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TagBeam\CS\FamilySymbolWrapper.cs	26	Active
Error	CS0246	The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)	TagBeam	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TagBeam\CS\FamilySymbolWrapper.cs	35	Active
Error	CS0246	The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)	TagBeam	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TagBeam\CS\FamilySymbolWrapper.cs	40	Active
Error	CS0246	The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)	TagBeam	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TagBeam\CS\FamilySymbolWrapper.cs	57	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	TagBeam	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TagBeam\CS\TagBeamData.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	TagBeam	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TagBeam\CS\TagBeamData.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	TagBeam	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TagBeam\CS\TagBeamData.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	TagBeam	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TagBeam\CS\TagBeamData.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	TagBeam	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TagBeam\CS\TagBeamData.cs	41	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	TagBeam	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TagBeam\CS\TagBeamData.cs	42	Active
Error	CS0246	The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)	TagBeam	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TagBeam\CS\TagBeamData.cs	43	Active
Error	CS0246	The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)	TagBeam	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TagBeam\CS\TagBeamData.cs	47	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	TagBeam	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TagBeam\CS\TagBeamData.cs	73	Active
Error	CS0246	The type or namespace name 'TagMode' could not be found (are you missing a using directive or an assembly reference?)	TagBeam	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TagBeam\CS\TagBeamData.cs	148	Active
Error	CS0246	The type or namespace name 'TagMode' could not be found (are you missing a using directive or an assembly reference?)	TagBeam	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TagBeam\CS\TagBeamData.cs	173	Active
Error	CS0246	The type or namespace name 'TagOrientation' could not be found (are you missing a using directive or an assembly reference?)	TagBeam	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TagBeam\CS\TagBeamData.cs	175	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	TagBeam	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TagBeam\CS\TagBeamForm.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	TagBeam	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TagBeam\CS\TagBeamForm.cs	32	Active
Error	BC40056	Namespace or type specified in the Imports 'Autodesk.Revit.DB' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.	TestFloorThickness	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TestFloorThickness\VB.NET\Command.vb	23	Active
Error	BC30002	Type 'Autodesk.Revit.Attributes.Transaction' is not defined.	TestFloorThickness	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TestFloorThickness\VB.NET\Command.vb	25	Active
Error	BC30451	'Autodesk' is not declared. It may be inaccessible due to its protection level.	TestFloorThickness	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TestFloorThickness\VB.NET\Command.vb	25	Active
Error	BC30002	Type 'Autodesk.Revit.Attributes.Regeneration' is not defined.	TestFloorThickness	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TestFloorThickness\VB.NET\Command.vb	26	Active
Error	BC30451	'Autodesk' is not declared. It may be inaccessible due to its protection level.	TestFloorThickness	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TestFloorThickness\VB.NET\Command.vb	26	Active
Error	BC30002	Type 'Autodesk.Revit.Attributes.Journaling' is not defined.	TestFloorThickness	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TestFloorThickness\VB.NET\Command.vb	27	Active
Error	BC30451	'Autodesk' is not declared. It may be inaccessible due to its protection level.	TestFloorThickness	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TestFloorThickness\VB.NET\Command.vb	27	Active
Error	BC30002	Type 'Autodesk.Revit.UI.IExternalCommand' is not defined.	TestFloorThickness	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TestFloorThickness\VB.NET\Command.vb	30	Active
Error	BC30002	Type 'Autodesk.Revit.UI.ExternalCommandData' is not defined.	TestFloorThickness	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TestFloorThickness\VB.NET\Command.vb	50	Active
Error	BC30002	Type 'Autodesk.Revit.DB.ElementSet' is not defined.	TestFloorThickness	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TestFloorThickness\VB.NET\Command.vb	51	Active
Error	BC30002	Type 'Autodesk.Revit.UI.Result' is not defined.	TestFloorThickness	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TestFloorThickness\VB.NET\Command.vb	51	Active
Error	BC30002	Type 'Autodesk.Revit.UI.IExternalCommand' is not defined.	TestFloorThickness	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TestFloorThickness\VB.NET\Command.vb	52	Active
Error	BC30002	Type 'Autodesk.Revit.Attributes.Transaction' is not defined.	TestWallThickness	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TestWallThickness\VB.NET\Command.vb	24	Active
Error	BC30451	'Autodesk' is not declared. It may be inaccessible due to its protection level.	TestWallThickness	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TestWallThickness\VB.NET\Command.vb	24	Active
Error	BC30002	Type 'Autodesk.Revit.Attributes.Regeneration' is not defined.	TestWallThickness	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TestWallThickness\VB.NET\Command.vb	25	Active
Error	BC30451	'Autodesk' is not declared. It may be inaccessible due to its protection level.	TestWallThickness	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TestWallThickness\VB.NET\Command.vb	25	Active
Error	BC30002	Type 'Autodesk.Revit.Attributes.Journaling' is not defined.	TestWallThickness	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TestWallThickness\VB.NET\Command.vb	26	Active
Error	BC30451	'Autodesk' is not declared. It may be inaccessible due to its protection level.	TestWallThickness	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TestWallThickness\VB.NET\Command.vb	26	Active
Error	BC30002	Type 'Autodesk.Revit.UI.IExternalCommand' is not defined.	TestWallThickness	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TestWallThickness\VB.NET\Command.vb	29	Active
Error	BC30002	Type 'Autodesk.Revit.UI.ExternalCommandData' is not defined.	TestWallThickness	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TestWallThickness\VB.NET\Command.vb	48	Active
Error	BC30002	Type 'Autodesk.Revit.DB.ElementSet' is not defined.	TestWallThickness	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TestWallThickness\VB.NET\Command.vb	49	Active
Error	BC30002	Type 'Autodesk.Revit.UI.Result' is not defined.	TestWallThickness	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TestWallThickness\VB.NET\Command.vb	49	Active
Error	BC30002	Type 'Autodesk.Revit.UI.IExternalCommand' is not defined.	TestWallThickness	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TestWallThickness\VB.NET\Command.vb	50	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	TransactionControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TransactionControl\CS\Command.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	TransactionControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TransactionControl\CS\Command.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	TransactionControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TransactionControl\CS\Command.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	TransactionControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TransactionControl\CS\Command.cs	38	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	TransactionControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TransactionControl\CS\Command.cs	38	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	TransactionControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TransactionControl\CS\Command.cs	39	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	TransactionControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TransactionControl\CS\Command.cs	39	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	TransactionControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TransactionControl\CS\Command.cs	40	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	TransactionControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TransactionControl\CS\Command.cs	40	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	TransactionControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TransactionControl\CS\Command.cs	41	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	TransactionControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TransactionControl\CS\Command.cs	59	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	TransactionControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TransactionControl\CS\Command.cs	59	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	TransactionControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TransactionControl\CS\Command.cs	60	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	TransactionControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TransactionControl\CS\CreateWallForm.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	TransactionControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TransactionControl\CS\CreateWallForm.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	TransactionControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TransactionControl\CS\CreateWallForm.cs	33	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	TransactionControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TransactionControl\CS\CreateWallForm.cs	45	Active
Error	CS0246	The type or namespace name 'Wall' could not be found (are you missing a using directive or an assembly reference?)	TransactionControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TransactionControl\CS\CreateWallForm.cs	49	Active
Error	CS0246	The type or namespace name 'Wall' could not be found (are you missing a using directive or an assembly reference?)	TransactionControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TransactionControl\CS\CreateWallForm.cs	54	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	TransactionControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TransactionControl\CS\CreateWallForm.cs	66	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	TransactionControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TransactionControl\CS\TransactionForm.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	TransactionControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TransactionControl\CS\TransactionForm.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	TransactionControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TransactionControl\CS\TransactionForm.cs	33	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	TransactionControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TransactionControl\CS\TransactionForm.cs	62	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	TransactionControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TransactionControl\CS\TransactionForm.cs	66	Active
Error	CS0246	The type or namespace name 'TransactionGroup' could not be found (are you missing a using directive or an assembly reference?)	TransactionControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TransactionControl\CS\TransactionForm.cs	102	Active
Error	CS0246	The type or namespace name 'TransactionGroup' could not be found (are you missing a using directive or an assembly reference?)	TransactionControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TransactionControl\CS\TransactionForm.cs	105	Active
Error	CS0246	The type or namespace name 'Transaction' could not be found (are you missing a using directive or an assembly reference?)	TransactionControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TransactionControl\CS\TransactionForm.cs	109	Active
Error	CS0246	The type or namespace name 'Wall' could not be found (are you missing a using directive or an assembly reference?)	TransactionControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TransactionControl\CS\TransactionForm.cs	121	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	TransactionControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TransactionControl\CS\TransactionForm.cs	127	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	TraverseSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\Command.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	TraverseSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\Command.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	TraverseSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\Command.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	TraverseSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\Command.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	TraverseSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\Command.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	TraverseSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\Command.cs	34	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	TraverseSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\Command.cs	35	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	TraverseSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\Command.cs	36	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	TraverseSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\Command.cs	43	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	TraverseSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\Command.cs	43	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	TraverseSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\Command.cs	44	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	TraverseSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\Command.cs	44	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	TraverseSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\Command.cs	45	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	TraverseSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\Command.cs	45	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	TraverseSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\Command.cs	46	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	TraverseSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\Command.cs	64	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	TraverseSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\Command.cs	64	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	TraverseSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\Command.cs	65	Active
Error	CS0246	The type or namespace name 'MEPSystem' could not be found (are you missing a using directive or an assembly reference?)	TraverseSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\Command.cs	135	Active
Error	CS0246	The type or namespace name 'MEPSystem' could not be found (are you missing a using directive or an assembly reference?)	TraverseSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\Command.cs	190	Active
Error	CS0246	The type or namespace name 'ConnectorSet' could not be found (are you missing a using directive or an assembly reference?)	TraverseSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\Command.cs	190	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	TraverseSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\TraversalTree.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	TraverseSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\TraversalTree.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	TraverseSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\TraversalTree.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	TraverseSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\TraversalTree.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	TraverseSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\TraversalTree.cs	43	Active
Error	CS0246	The type or namespace name 'FlowDirectionType' could not be found (are you missing a using directive or an assembly reference?)	TraverseSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\TraversalTree.cs	50	Active
Error	CS0246	The type or namespace name 'Connector' could not be found (are you missing a using directive or an assembly reference?)	TraverseSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\TraversalTree.cs	58	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	TraverseSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\TraversalTree.cs	66	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	TraverseSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\TraversalTree.cs	73	Active
Error	CS0246	The type or namespace name 'FlowDirectionType' could not be found (are you missing a using directive or an assembly reference?)	TraverseSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\TraversalTree.cs	84	Active
Error	CS0246	The type or namespace name 'Connector' could not be found (are you missing a using directive or an assembly reference?)	TraverseSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\TraversalTree.cs	129	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	TraverseSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\TraversalTree.cs	148	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	TraverseSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\TraversalTree.cs	148	Active
Error	CS0246	The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)	TraverseSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\TraversalTree.cs	160	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	TraverseSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\TraversalTree.cs	160	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	TraverseSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\TraversalTree.cs	239	Active
Error	CS0246	The type or namespace name 'MEPSystem' could not be found (are you missing a using directive or an assembly reference?)	TraverseSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\TraversalTree.cs	241	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	TraverseSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\TraversalTree.cs	254	Active
Error	CS0246	The type or namespace name 'MEPSystem' could not be found (are you missing a using directive or an assembly reference?)	TraverseSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\TraversalTree.cs	254	Active
Error	CS0246	The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)	TraverseSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\TraversalTree.cs	306	Active
Error	CS0246	The type or namespace name 'Connector' could not be found (are you missing a using directive or an assembly reference?)	TraverseSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\TraversalTree.cs	332	Active
Error	CS0246	The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)	TraverseSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\TraversalTree.cs	332	Active
Error	CS0246	The type or namespace name 'Connector' could not be found (are you missing a using directive or an assembly reference?)	TraverseSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\TraversalTree.cs	332	Active
Error	CS0246	The type or namespace name 'Connector' could not be found (are you missing a using directive or an assembly reference?)	TraverseSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\TraversalTree.cs	488	Active
Error	CS0246	The type or namespace name 'Connector' could not be found (are you missing a using directive or an assembly reference?)	TraverseSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\TraversalTree.cs	488	Active
Error	CS0246	The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)	TraverseSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\TraversalTree.cs	511	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	TraverseSystem	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\TraversalTree.cs	511	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Truss	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\Command.cs	25	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Truss	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\Command.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Truss	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\Command.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Truss	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\Command.cs	34	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	Truss	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\Command.cs	34	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Truss	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\Command.cs	35	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	Truss	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\Command.cs	35	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Truss	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\Command.cs	36	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	Truss	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\Command.cs	36	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	Truss	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\Command.cs	37	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Truss	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\Command.cs	56	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	Truss	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\Command.cs	56	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Truss	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\Command.cs	57	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Truss	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\MathTools.cs	25	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Truss	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\MathTools.cs	114	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Truss	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\TrussForm.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Truss	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\TrussForm.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Truss	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\TrussForm.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Truss	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\TrussForm.cs	34	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	Truss	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\TrussForm.cs	47	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Truss	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\TrussForm.cs	49	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Truss	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\TrussForm.cs	50	Active
Error	CS0246	The type or namespace name 'TrussType' could not be found (are you missing a using directive or an assembly reference?)	Truss	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\TrussForm.cs	52	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Truss	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\TrussForm.cs	53	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Truss	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\TrussForm.cs	57	Active
Error	CS0246	The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)	Truss	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\TrussForm.cs	58	Active
Error	CS0246	The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)	Truss	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\TrussForm.cs	59	Active
Error	CS0246	The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)	Truss	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\TrussForm.cs	60	Active
Error	CS0246	The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)	Truss	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\TrussForm.cs	61	Active
Error	CS0246	The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)	Truss	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\TrussForm.cs	62	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	Truss	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\TrussForm.cs	69	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Truss	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\TrussForm.cs	282	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Truss	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\TrussGeometry.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Truss	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\TrussGeometry.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Truss	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\TrussGeometry.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Truss	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\TrussGeometry.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Truss	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\TrussGeometry.cs	45	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	Truss	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\TrussGeometry.cs	57	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Truss	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\TrussGeometry.cs	59	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	Truss	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\TrussGeometry.cs	75	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Truss	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\TrussGeometry.cs	77	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Truss	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\TrussGeometry.cs	79	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Truss	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\TrussGeometry.cs	87	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	Truss	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\TrussGeometry.cs	87	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	Truss	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\TrussGeometry.cs	126	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Truss	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\TrussGeometry.cs	248	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	Truss	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\TrussGeometry.cs	315	Active
Error	CS0246	The type or namespace name 'CurveArray' could not be found (are you missing a using directive or an assembly reference?)	Truss	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\TrussGeometry.cs	344	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Truss	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\TrussGeometry.cs	344	Active
Error	CS0246	The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)	Truss	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\TrussGeometry.cs	542	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	Truss	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\TrussGeometry.cs	542	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	TypeRegeneration	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\TypeRegeneration\CS\Command.cs	25	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	TypeRegeneration	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\TypeRegeneration\CS\Command.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	TypeRegeneration	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\TypeRegeneration\CS\Command.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	TypeRegeneration	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\TypeRegeneration\CS\Command.cs	39	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	TypeRegeneration	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\TypeRegeneration\CS\Command.cs	39	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	TypeRegeneration	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\TypeRegeneration\CS\Command.cs	40	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	TypeRegeneration	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\TypeRegeneration\CS\Command.cs	40	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	TypeRegeneration	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\TypeRegeneration\CS\Command.cs	41	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	TypeRegeneration	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\TypeRegeneration\CS\Command.cs	41	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	TypeRegeneration	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\TypeRegeneration\CS\Command.cs	42	Active
Error	CS0246	The type or namespace name 'FamilyManager' could not be found (are you missing a using directive or an assembly reference?)	TypeRegeneration	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\TypeRegeneration\CS\Command.cs	48	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	TypeRegeneration	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\TypeRegeneration\CS\Command.cs	73	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	TypeRegeneration	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\TypeRegeneration\CS\Command.cs	73	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	TypeRegeneration	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\TypeRegeneration\CS\Command.cs	75	Active
Error	BC40056	Namespace or type specified in the Imports 'Autodesk.Revit.DB' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.	TypeSelector	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TypeSelector\VB.NET\Command.vb	26	Active
Error	BC30002	Type 'Autodesk.Revit.Attributes.Transaction' is not defined.	TypeSelector	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TypeSelector\VB.NET\Command.vb	32	Active
Error	BC30451	'Autodesk' is not declared. It may be inaccessible due to its protection level.	TypeSelector	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TypeSelector\VB.NET\Command.vb	32	Active
Error	BC30002	Type 'Autodesk.Revit.Attributes.Regeneration' is not defined.	TypeSelector	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TypeSelector\VB.NET\Command.vb	33	Active
Error	BC30451	'Autodesk' is not declared. It may be inaccessible due to its protection level.	TypeSelector	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TypeSelector\VB.NET\Command.vb	33	Active
Error	BC30002	Type 'Autodesk.Revit.Attributes.Journaling' is not defined.	TypeSelector	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TypeSelector\VB.NET\Command.vb	34	Active
Error	BC30451	'Autodesk' is not declared. It may be inaccessible due to its protection level.	TypeSelector	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TypeSelector\VB.NET\Command.vb	34	Active
Error	BC30002	Type 'Autodesk.Revit.UI.IExternalCommand' is not defined.	TypeSelector	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TypeSelector\VB.NET\Command.vb	36	Active
Error	BC30002	Type 'Autodesk.Revit.UI.ExternalCommandData' is not defined.	TypeSelector	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TypeSelector\VB.NET\Command.vb	54	Active
Error	BC30002	Type 'Autodesk.Revit.DB.ElementSet' is not defined.	TypeSelector	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TypeSelector\VB.NET\Command.vb	55	Active
Error	BC30002	Type 'Autodesk.Revit.UI.Result' is not defined.	TypeSelector	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TypeSelector\VB.NET\Command.vb	55	Active
Error	BC30002	Type 'Autodesk.Revit.UI.IExternalCommand' is not defined.	TypeSelector	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TypeSelector\VB.NET\Command.vb	56	Active
Error	BC30002	Type 'Autodesk.Revit.DB.Document' is not defined.	TypeSelector	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TypeSelector\VB.NET\TypeSelectorWindow.vb	123	Active
Error	BC30002	Type 'Autodesk.Revit.DB.ElementId' is not defined.	TypeSelector	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TypeSelector\VB.NET\TypeSelectorWindow.vb	124	Active
Error	BC30002	Type 'Autodesk.Revit.UI.Result' is not defined.	TypeSelector	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TypeSelector\VB.NET\TypeSelectorWindow.vb	125	Active
Error	BC30002	Type 'Autodesk.Revit.DB.Document' is not defined.	TypeSelector	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TypeSelector\VB.NET\TypeSelectorWindow.vb	134	Active
Error	BC30002	Type 'Autodesk.Revit.DB.Element' is not defined.	TypeSelector	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TypeSelector\VB.NET\TypeSelectorWindow.vb	134	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	UIAPI	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\ApplicationAvailabilityClass.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	UIAPI	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\ApplicationAvailabilityClass.cs	29	Active
Error	CS0246	The type or namespace name 'IExternalCommandAvailability' could not be found (are you missing a using directive or an assembly reference?)	UIAPI	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\ApplicationAvailabilityClass.cs	34	Active
Error	CS0246	The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)	UIAPI	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\ApplicationAvailabilityClass.cs	36	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	UIAPI	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\ApplicationAvailabilityClass.cs	37	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	UIAPI	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\ApplicationOptions.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	UIAPI	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\DragAndDrop\DragAndDrop.cs	34	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	UIAPI	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\DragAndDrop\DragAndDrop.cs	35	Active
Error	CS0246	The type or namespace name 'BuiltInCategory' could not be found (are you missing a using directive or an assembly reference?)	UIAPI	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\DragAndDrop\DragAndDrop.cs	41	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	UIAPI	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\DragAndDrop\DragAndDrop.cs	50	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	UIAPI	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\DragAndDrop\DragAndDrop.cs	79	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	UIAPI	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\DragAndDrop\DragAndDrop.cs	85	Active
Error	CS0246	The type or namespace name 'IDropHandler' could not be found (are you missing a using directive or an assembly reference?)	UIAPI	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\DragAndDrop\DragAndDrop.cs	188	Active
Error	CS0246	The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)	UIAPI	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\DragAndDrop\DragAndDrop.cs	190	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	UIAPI	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\DragAndDrop\DragAndDropCommand.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	UIAPI	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\DragAndDrop\DragAndDropCommand.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	UIAPI	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\DragAndDrop\DragAndDropCommand.cs	51	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	UIAPI	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\DragAndDrop\DragAndDropCommand.cs	51	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	UIAPI	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\DragAndDrop\DragAndDropCommand.cs	52	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	UIAPI	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\DragAndDrop\DragAndDropCommand.cs	54	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	UIAPI	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\DragAndDrop\DragAndDropCommand.cs	54	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	UIAPI	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\DragAndDrop\DragAndDropCommand.cs	54	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	UIAPI	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\ExternalApplication.cs	35	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	UIAPI	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\ExternalApplication.cs	36	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	UIAPI	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\ExternalApplication.cs	37	Active
Error	CS0246	The type or namespace name 'IExternalApplication' could not be found (are you missing a using directive or an assembly reference?)	UIAPI	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\ExternalApplication.cs	41	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	UIAPI	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\ExternalApplication.cs	51	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	UIAPI	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\ExternalApplication.cs	69	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	UIAPI	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\ExternalApplication.cs	142	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	UIAPI	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\ExternalApplication.cs	142	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	UIAPI	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\ExternalApplication.cs	158	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	UIAPI	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\ExternalApplication.cs	158	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	UIAPI	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\ExternalApplication.cs	172	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	UIAPI	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\ExternalApplication.cs	177	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	UIAPI	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\ExternalApplication.cs	179	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	UIAPI	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\ExternalApplication.cs	184	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	UIAPI	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\ExternalApplication.cs	244	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	UIAPI	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\ExternalApplication.cs	244	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	UIAPI	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\ExternalApplication.cs	245	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	UIAPI	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\ExternalApplication.cs	248	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	UIAPI	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\ExternalApplication.cs	248	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	UIAPI	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\ExternalApplication.cs	248	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	UIAPI	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\OptionsDialog\AddTabCommand.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	UIAPI	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\OptionsDialog\AddTabCommand.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	UIAPI	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\OptionsDialog\AddTabCommand.cs	31	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	UIAPI	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\OptionsDialog\AddTabCommand.cs	38	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	UIAPI	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\OptionsDialog\AddTabCommand.cs	50	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	UIAPI	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\OptionsDialog\AddTabCommand.cs	86	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	UIAPI	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\OptionsDialog\UserControl1.xaml.cs	16	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	UIAPI	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\OptionsDialog\UserControl1.xaml.cs	17	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	UIAPI	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\OptionsDialog\UserControl1.xaml.cs	18	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	UIAPI	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\OptionsDialog\UserControl2.xaml.cs	15	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	UIAPI	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\OptionsDialog\UserControl2.xaml.cs	16	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	UIAPI	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\OptionsDialog\UserControl2.xaml.cs	17	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	UIAPI	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\OptionsDialog\UserControl3.xaml.cs	15	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	UIAPI	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\OptionsDialog\UserControl3.xaml.cs	16	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	UIAPI	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\OptionsDialog\UserControl3.xaml.cs	17	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	UIAPI	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\PreviewControl\PreviewCommand.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	UIAPI	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\PreviewControl\PreviewCommand.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	UIAPI	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\PreviewControl\PreviewCommand.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	UIAPI	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\PreviewControl\PreviewCommand.cs	52	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	UIAPI	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\PreviewControl\PreviewCommand.cs	52	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	UIAPI	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\PreviewControl\PreviewCommand.cs	53	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	UIAPI	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\PreviewControl\PreviewCommand.cs	55	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	UIAPI	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\PreviewControl\PreviewCommand.cs	55	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	UIAPI	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\PreviewControl\PreviewCommand.cs	55	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	UIAPI	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\PreviewControl\PreviewCommand.cs	81	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	UIAPI	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\PreviewControl\PreviewModel.cs	10	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	UIAPI	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\PreviewControl\PreviewModel.cs	11	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	UIAPI	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\PreviewControl\PreviewModel.cs	12	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	UIAPI	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\PreviewControl\PreviewModel.cs	13	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	UIAPI	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\PreviewControl\PreviewModel.cs	19	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	UIAPI	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\PreviewControl\PreviewModel.cs	30	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	UIAPI	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\PreviewControl\PreviewModel.cs	56	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	UIAPI	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\PreviewControl\PreviewModel.cs	130	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	UIAPI	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\PreviewControl\PreviewModel.cs	131	Active
Error	CS0246	The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)	UIAPI	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\PreviewControl\PreviewModel.cs	133	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	UIAPI	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\PreviewControl\PreviewModel.cs	200	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	UIAPI	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\PreviewControl\PreviewModel.cs	215	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	UIAPI	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\PreviewControl\PreviewModel.cs	223	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	UIAPI	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\PreviewControl\PreviewModel.cs	244	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Units	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Units\CS\Command.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Units	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Units\CS\Command.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Units	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Units\CS\Command.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Units	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Units\CS\Command.cs	38	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	Units	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Units\CS\Command.cs	38	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Units	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Units\CS\Command.cs	39	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	Units	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Units\CS\Command.cs	39	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Units	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Units\CS\Command.cs	40	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	Units	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Units\CS\Command.cs	40	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	Units	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Units\CS\Command.cs	41	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	Units	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Units\CS\Command.cs	59	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	Units	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Units\CS\Command.cs	59	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	Units	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Units\CS\Command.cs	60	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Units	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Units\CS\FormatForm.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Units	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Units\CS\FormatForm.cs	42	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Units	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Units\CS\FormatForm.cs	43	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Units	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Units\CS\FormatForm.cs	48	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Units	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Units\CS\FormatForm.cs	60	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Units	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Units\CS\FormatForm.cs	60	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Units	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Units\CS\UnitsForm.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Units	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Units\CS\UnitsForm.cs	42	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	Units	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Units\CS\UnitsForm.cs	48	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ValidateParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\ValidateParameters\CS\Application.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ValidateParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\ValidateParameters\CS\Application.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ValidateParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\ValidateParameters\CS\Application.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ValidateParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\ValidateParameters\CS\Application.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ValidateParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\ValidateParameters\CS\Application.cs	39	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	ValidateParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\ValidateParameters\CS\Application.cs	39	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ValidateParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\ValidateParameters\CS\Application.cs	40	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	ValidateParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\ValidateParameters\CS\Application.cs	40	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ValidateParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\ValidateParameters\CS\Application.cs	41	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	ValidateParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\ValidateParameters\CS\Application.cs	41	Active
Error	CS0246	The type or namespace name 'IExternalApplication' could not be found (are you missing a using directive or an assembly reference?)	ValidateParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\ValidateParameters\CS\Application.cs	42	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ValidateParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\ValidateParameters\CS\Application.cs	57	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	ValidateParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\ValidateParameters\CS\Application.cs	57	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ValidateParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\ValidateParameters\CS\Application.cs	83	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	ValidateParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\ValidateParameters\CS\Application.cs	83	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ValidateParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\ValidateParameters\CS\Application.cs	102	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ValidateParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\ValidateParameters\CS\Application.cs	112	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	ValidateParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\ValidateParameters\CS\Application.cs	121	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ValidateParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\ValidateParameters\CS\Command.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ValidateParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\ValidateParameters\CS\Command.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ValidateParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\ValidateParameters\CS\Command.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ValidateParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\ValidateParameters\CS\Command.cs	37	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	ValidateParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\ValidateParameters\CS\Command.cs	37	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ValidateParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\ValidateParameters\CS\Command.cs	38	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	ValidateParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\ValidateParameters\CS\Command.cs	38	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ValidateParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\ValidateParameters\CS\Command.cs	39	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	ValidateParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\ValidateParameters\CS\Command.cs	39	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	ValidateParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\ValidateParameters\CS\Command.cs	40	Active
Error	CS0246	The type or namespace name 'FamilyManager' could not be found (are you missing a using directive or an assembly reference?)	ValidateParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\ValidateParameters\CS\Command.cs	46	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ValidateParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\ValidateParameters\CS\Command.cs	66	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	ValidateParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\ValidateParameters\CS\Command.cs	66	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	ValidateParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\ValidateParameters\CS\Command.cs	68	Active
Error	CS0246	The type or namespace name 'FamilyManager' could not be found (are you missing a using directive or an assembly reference?)	ValidateParameters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\ValidateParameters\CS\Command.cs	99	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	VersionChecking	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\VersionChecking\CS\VersionChecking.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	VersionChecking	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\VersionChecking\CS\VersionChecking.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	VersionChecking	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\VersionChecking\CS\VersionChecking.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	VersionChecking	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\VersionChecking\CS\VersionChecking.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	VersionChecking	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\VersionChecking\CS\VersionChecking.cs	38	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	VersionChecking	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\VersionChecking\CS\VersionChecking.cs	38	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	VersionChecking	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\VersionChecking\CS\VersionChecking.cs	39	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	VersionChecking	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\VersionChecking\CS\VersionChecking.cs	39	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	VersionChecking	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\VersionChecking\CS\VersionChecking.cs	40	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	VersionChecking	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\VersionChecking\CS\VersionChecking.cs	40	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	VersionChecking	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\VersionChecking\CS\VersionChecking.cs	41	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	VersionChecking	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\VersionChecking\CS\VersionChecking.cs	97	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	VersionChecking	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\VersionChecking\CS\VersionChecking.cs	97	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	VersionChecking	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\VersionChecking\CS\VersionChecking.cs	99	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ViewFilters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\Command.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ViewFilters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\Command.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ViewFilters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\Command.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ViewFilters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\Command.cs	40	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	ViewFilters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\Command.cs	40	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ViewFilters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\Command.cs	41	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	ViewFilters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\Command.cs	41	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ViewFilters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\Command.cs	42	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	ViewFilters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\Command.cs	42	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	ViewFilters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\Command.cs	43	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ViewFilters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\Command.cs	61	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ViewFilters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\Command.cs	61	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	ViewFilters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\Command.cs	62	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ViewFilters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\FilterData.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ViewFilters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\FilterData.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ViewFilters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\FilterData.cs	34	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ViewFilters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\FilterData.cs	35	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ViewFilters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\FilterData.cs	36	Active
Error	CS0246	The type or namespace name 'BuiltInParameter' could not be found (are you missing a using directive or an assembly reference?)	ViewFilters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\FilterData.cs	51	Active
Error	CS0246	The type or namespace name 'StorageType' could not be found (are you missing a using directive or an assembly reference?)	ViewFilters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\FilterData.cs	66	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	ViewFilters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\FilterData.cs	84	Active
Error	CS0246	The type or namespace name 'BuiltInParameter' could not be found (are you missing a using directive or an assembly reference?)	ViewFilters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\FilterData.cs	98	Active
Error	CS0246	The type or namespace name 'BuiltInParameter' could not be found (are you missing a using directive or an assembly reference?)	ViewFilters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\FilterData.cs	117	Active
Error	CS0246	The type or namespace name 'BuiltInParameter' could not be found (are you missing a using directive or an assembly reference?)	ViewFilters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\FilterData.cs	135	Active
Error	CS0246	The type or namespace name 'BuiltInParameter' could not be found (are you missing a using directive or an assembly reference?)	ViewFilters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\FilterData.cs	152	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	ViewFilters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\FilterData.cs	152	Active
Error	CS0246	The type or namespace name 'FilterRule' could not be found (are you missing a using directive or an assembly reference?)	ViewFilters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\FilterData.cs	167	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ViewFilters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\FilterData.cs	286	Active
Error	CS0246	The type or namespace name 'BuiltInCategory' could not be found (are you missing a using directive or an assembly reference?)	ViewFilters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\FilterData.cs	291	Active
Error	CS0246	The type or namespace name 'BuiltInCategory' could not be found (are you missing a using directive or an assembly reference?)	ViewFilters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\FilterData.cs	303	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	ViewFilters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\FilterData.cs	311	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	ViewFilters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\FilterData.cs	328	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ViewFilters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\FilterData.cs	368	Active
Error	CS0246	The type or namespace name 'BuiltInCategory' could not be found (are you missing a using directive or an assembly reference?)	ViewFilters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\FilterData.cs	369	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ViewFilters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\FilterData.cs	384	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	ViewFilters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\FilterData.cs	385	Active
Error	CS0246	The type or namespace name 'StorageType' could not be found (are you missing a using directive or an assembly reference?)	ViewFilters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\FilterData.cs	479	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ViewFilters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\FilterUtil.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ViewFilters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\FilterUtil.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ViewFilters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\FilterUtil.cs	34	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ViewFilters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\FilterUtil.cs	35	Active
Error	CS0246	The type or namespace name 'ParameterFilterElement' could not be found (are you missing a using directive or an assembly reference?)	ViewFilters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\FilterUtil.cs	53	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ViewFilters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\FilterUtil.cs	53	Active
Error	CS0246	The type or namespace name 'BuiltInParameter' could not be found (are you missing a using directive or an assembly reference?)	ViewFilters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\FilterUtil.cs	67	Active
Error	CS0246	The type or namespace name 'FilterRule' could not be found (are you missing a using directive or an assembly reference?)	ViewFilters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\FilterUtil.cs	67	Active
Error	CS0246	The type or namespace name 'FilterStringRuleEvaluator' could not be found (are you missing a using directive or an assembly reference?)	ViewFilters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\FilterUtil.cs	109	Active
Error	CS0246	The type or namespace name 'FilterNumericRuleEvaluator' could not be found (are you missing a using directive or an assembly reference?)	ViewFilters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\FilterUtil.cs	140	Active
Error	CS0246	The type or namespace name 'FilterRule' could not be found (are you missing a using directive or an assembly reference?)	ViewFilters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\FilterUtil.cs	166	Active
Error	CS0246	The type or namespace name 'FilterRule' could not be found (are you missing a using directive or an assembly reference?)	ViewFilters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\FilterUtil.cs	166	Active
Error	CS0246	The type or namespace name 'ElementFilter' could not be found (are you missing a using directive or an assembly reference?)	ViewFilters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\FilterUtil.cs	190	Active
Error	CS0246	The type or namespace name 'FilterRule' could not be found (are you missing a using directive or an assembly reference?)	ViewFilters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\FilterUtil.cs	190	Active
Error	CS0246	The type or namespace name 'FilterRule' could not be found (are you missing a using directive or an assembly reference?)	ViewFilters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\FilterUtil.cs	214	Active
Error	CS0246	The type or namespace name 'ElementFilter' could not be found (are you missing a using directive or an assembly reference?)	ViewFilters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\FilterUtil.cs	214	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ViewFilters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\NewFilterForm.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ViewFilters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\ViewFiltersForm.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ViewFilters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\ViewFiltersForm.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ViewFilters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\ViewFiltersForm.cs	34	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ViewFilters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\ViewFiltersForm.cs	48	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ViewFilters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\ViewFiltersForm.cs	81	Active
Error	CS0246	The type or namespace name 'StorageType' could not be found (are you missing a using directive or an assembly reference?)	ViewFilters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\ViewFiltersForm.cs	758	Active
Error	CS0246	The type or namespace name 'BuiltInParameter' could not be found (are you missing a using directive or an assembly reference?)	ViewFilters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\ViewFiltersForm.cs	784	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	ViewFilters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\ViewFiltersForm.cs	835	Active
Error	CS0246	The type or namespace name 'BuiltInParameter' could not be found (are you missing a using directive or an assembly reference?)	ViewFilters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\ViewFiltersForm.cs	853	Active
Error	CS0246	The type or namespace name 'BuiltInParameter' could not be found (are you missing a using directive or an assembly reference?)	ViewFilters	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\ViewFiltersForm.cs	884	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ViewPrinter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewPrinter\CS\Command.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ViewPrinter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewPrinter\CS\Command.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ViewPrinter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewPrinter\CS\Command.cs	38	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	ViewPrinter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewPrinter\CS\Command.cs	38	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ViewPrinter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewPrinter\CS\Command.cs	39	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	ViewPrinter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewPrinter\CS\Command.cs	39	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ViewPrinter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewPrinter\CS\Command.cs	40	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	ViewPrinter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewPrinter\CS\Command.cs	40	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	ViewPrinter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewPrinter\CS\Command.cs	41	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ViewPrinter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewPrinter\CS\Command.cs	59	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	ViewPrinter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewPrinter\CS\Command.cs	59	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ViewPrinter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewPrinter\CS\Command.cs	60	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ViewPrinter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewPrinter\CS\PrintMgr.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ViewPrinter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewPrinter\CS\PrintMgr.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ViewPrinter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewPrinter\CS\PrintMgr.cs	32	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	ViewPrinter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewPrinter\CS\PrintMgr.cs	41	Active
Error	CS0246	The type or namespace name 'PrintManager' could not be found (are you missing a using directive or an assembly reference?)	ViewPrinter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewPrinter\CS\PrintMgr.cs	42	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	ViewPrinter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewPrinter\CS\PrintMgr.cs	44	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ViewPrinter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewPrinter\CS\PrintMgr.cs	190	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ViewPrinter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewPrinter\CS\PrintMgrForm.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ViewPrinter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewPrinter\CS\PrintSetupForm.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ViewPrinter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewPrinter\CS\PrintSetupForm.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ViewPrinter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewPrinter\CS\PrintSTP.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ViewPrinter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewPrinter\CS\PrintSTP.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ViewPrinter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewPrinter\CS\PrintSTP.cs	31	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	ViewPrinter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewPrinter\CS\PrintSTP.cs	42	Active
Error	CS0246	The type or namespace name 'PrintManager' could not be found (are you missing a using directive or an assembly reference?)	ViewPrinter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewPrinter\CS\PrintSTP.cs	43	Active
Error	CS0246	The type or namespace name 'PrintManager' could not be found (are you missing a using directive or an assembly reference?)	ViewPrinter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewPrinter\CS\PrintSTP.cs	45	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	ViewPrinter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewPrinter\CS\PrintSTP.cs	46	Active
Error	CS0246	The type or namespace name 'PageOrientationType' could not be found (are you missing a using directive or an assembly reference?)	ViewPrinter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewPrinter\CS\PrintSTP.cs	218	Active
Error	CS0246	The type or namespace name 'PaperPlacementType' could not be found (are you missing a using directive or an assembly reference?)	ViewPrinter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewPrinter\CS\PrintSTP.cs	230	Active
Error	CS0246	The type or namespace name 'MarginType' could not be found (are you missing a using directive or an assembly reference?)	ViewPrinter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewPrinter\CS\PrintSTP.cs	250	Active
Error	CS0246	The type or namespace name 'HiddenLineViewsType' could not be found (are you missing a using directive or an assembly reference?)	ViewPrinter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewPrinter\CS\PrintSTP.cs	286	Active
Error	CS0246	The type or namespace name 'ZoomType' could not be found (are you missing a using directive or an assembly reference?)	ViewPrinter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewPrinter\CS\PrintSTP.cs	310	Active
Error	CS0246	The type or namespace name 'RasterQualityType' could not be found (are you missing a using directive or an assembly reference?)	ViewPrinter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewPrinter\CS\PrintSTP.cs	330	Active
Error	CS0246	The type or namespace name 'ColorDepthType' could not be found (are you missing a using directive or an assembly reference?)	ViewPrinter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewPrinter\CS\PrintSTP.cs	350	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ViewPrinter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewPrinter\CS\SaveAsForm.cs	9	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ViewPrinter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewPrinter\CS\SaveAsForm.cs	10	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ViewPrinter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewPrinter\CS\ViewSheets.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ViewPrinter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewPrinter\CS\ViewSheets.cs	30	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	ViewPrinter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewPrinter\CS\ViewSheets.cs	82	Active
Error	CS0246	The type or namespace name 'ViewSheetSetting' could not be found (are you missing a using directive or an assembly reference?)	ViewPrinter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewPrinter\CS\ViewSheets.cs	83	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	ViewPrinter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewPrinter\CS\ViewSheets.cs	85	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ViewPrinter	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewPrinter\CS\ViewSheets.cs	214	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ViewTemplateCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewTemplateCreation\CS\Command.cs	25	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ViewTemplateCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewTemplateCreation\CS\Command.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ViewTemplateCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewTemplateCreation\CS\Command.cs	33	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	ViewTemplateCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewTemplateCreation\CS\Command.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ViewTemplateCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewTemplateCreation\CS\Command.cs	34	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	ViewTemplateCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewTemplateCreation\CS\Command.cs	34	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ViewTemplateCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewTemplateCreation\CS\Command.cs	35	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	ViewTemplateCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewTemplateCreation\CS\Command.cs	35	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	ViewTemplateCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewTemplateCreation\CS\Command.cs	36	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	ViewTemplateCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewTemplateCreation\CS\Command.cs	54	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	ViewTemplateCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewTemplateCreation\CS\Command.cs	54	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	ViewTemplateCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewTemplateCreation\CS\Command.cs	54	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ViewTemplateCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewTemplateCreation\CS\ViewTemplateCreationForm.cs	26	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	ViewTemplateCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewTemplateCreation\CS\ViewTemplateCreationForm.cs	39	Active
Error	CS0246	The type or namespace name 'View' could not be found (are you missing a using directive or an assembly reference?)	ViewTemplateCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewTemplateCreation\CS\ViewTemplateCreationForm.cs	125	Active
Error	CS0246	The type or namespace name 'View' could not be found (are you missing a using directive or an assembly reference?)	ViewTemplateCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewTemplateCreation\CS\ViewTemplateCreationForm.cs	136	Active
Error	CS0246	The type or namespace name 'View' could not be found (are you missing a using directive or an assembly reference?)	ViewTemplateCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewTemplateCreation\CS\ViewTemplateCreationForm.cs	146	Active
Error	CS0246	The type or namespace name 'ViewDetailLevel' could not be found (are you missing a using directive or an assembly reference?)	ViewTemplateCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewTemplateCreation\CS\ViewTemplateCreationForm.cs	169	Active
Error	CS0246	The type or namespace name 'View' could not be found (are you missing a using directive or an assembly reference?)	ViewTemplateCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewTemplateCreation\CS\ViewTemplateCreationForm.cs	175	Active
Error	CS0246	The type or namespace name 'View' could not be found (are you missing a using directive or an assembly reference?)	ViewTemplateCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewTemplateCreation\CS\ViewTemplateCreationForm.cs	192	Active
Error	CS0246	The type or namespace name 'BuiltInCategory' could not be found (are you missing a using directive or an assembly reference?)	ViewTemplateCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewTemplateCreation\CS\ViewTemplateCreationForm.cs	192	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	ViewTemplateCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewTemplateCreation\CS\ViewTemplateCreationForm.cs	192	Active
Error	CS0246	The type or namespace name 'FillPatternElement' could not be found (are you missing a using directive or an assembly reference?)	ViewTemplateCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewTemplateCreation\CS\ViewTemplateCreationForm.cs	192	Active
Error	CS0246	The type or namespace name 'View' could not be found (are you missing a using directive or an assembly reference?)	ViewTemplateCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewTemplateCreation\CS\ViewTemplateCreationForm.cs	219	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	ViewTemplateCreation	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewTemplateCreation\CS\ViewTemplateCreationForm.cs	220	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	VisibilityControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\VisibilityControl\CS\Command.cs	25	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	VisibilityControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\VisibilityControl\CS\Command.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	VisibilityControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\VisibilityControl\CS\Command.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	VisibilityControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\VisibilityControl\CS\Command.cs	34	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	VisibilityControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\VisibilityControl\CS\Command.cs	34	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	VisibilityControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\VisibilityControl\CS\Command.cs	35	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	VisibilityControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\VisibilityControl\CS\Command.cs	35	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	VisibilityControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\VisibilityControl\CS\Command.cs	36	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	VisibilityControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\VisibilityControl\CS\Command.cs	36	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	VisibilityControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\VisibilityControl\CS\Command.cs	37	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	VisibilityControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\VisibilityControl\CS\Command.cs	55	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	VisibilityControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\VisibilityControl\CS\Command.cs	55	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	VisibilityControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\VisibilityControl\CS\Command.cs	56	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	VisibilityControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\VisibilityControl\CS\VisibilityCtrl.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	VisibilityControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\VisibilityControl\CS\VisibilityCtrl.cs	45	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	VisibilityControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\VisibilityControl\CS\VisibilityCtrl.cs	81	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	VisibilityControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\VisibilityControl\CS\VisibilityCtrlForm.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	VisibilityControl	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\VisibilityControl\CS\VisibilityCtrlForm.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Command.cs	25	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Command.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Command.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Command.cs	36	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Command.cs	36	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Command.cs	37	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Command.cs	37	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Command.cs	38	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Command.cs	38	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Command.cs	39	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Command.cs	57	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Command.cs	57	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Command.cs	57	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Command.cs	157	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Forms\LWinderOptions.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Forms\UWinderOptions.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\LWinder.cs	24	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\LWinder.cs	62	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\UWinder.cs	24	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\UWinder.cs	82	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\Winder.cs	25	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\Winder.cs	26	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\Winder.cs	38	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\Winder.cs	53	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\Winder.cs	58	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\Winder.cs	63	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\Winder.cs	68	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\Winder.cs	76	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\Winder.cs	76	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\Winder.cs	105	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\Winder.cs	105	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\Winder.cs	167	Active
Error	CS0246	The type or namespace name 'IFailuresPreprocessor' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\Winder.cs	209	Active
Error	CS0246	The type or namespace name 'FailureProcessingResult' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\Winder.cs	211	Active
Error	CS0246	The type or namespace name 'FailuresAccessor' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\Winder.cs	211	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderCorner.cs	24	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderCorner.cs	48	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderCorner.cs	53	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderCorner.cs	58	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderCorner.cs	78	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderCorner.cs	83	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderCorner.cs	92	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderCorner.cs	92	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderCorner.cs	92	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderCorner.cs	104	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderCorner.cs	120	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderCorner.cs	120	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderCorner.cs	121	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderCorner.cs	121	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderSinglePoint.cs	25	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderSinglePoint.cs	48	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderSinglePoint.cs	57	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderSinglePoint.cs	57	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderSinglePoint.cs	57	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderSinglePoint.cs	103	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderSinglePoint.cs	103	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderSinglePoint.cs	104	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderSinglePoint.cs	104	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderSinglePoint.cs	232	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderStraight.cs	24	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderStraight.cs	47	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderStraight.cs	52	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderStraight.cs	57	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderStraight.cs	71	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderStraight.cs	71	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderStraight.cs	71	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderStraight.cs	83	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderStraight.cs	83	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderStraight.cs	84	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderStraight.cs	84	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderUtil.cs	25	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderUtil.cs	41	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderUtil.cs	41	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderUtil.cs	41	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderUtil.cs	90	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderUtil.cs	109	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderUtil.cs	134	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderUtil.cs	134	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderUtil.cs	183	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderUtil.cs	183	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderUtil.cs	183	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderUtil.cs	264	Active
Error	CS0246	The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderUtil.cs	264	Active
Error	CS0246	The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderUtil.cs	264	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\WinderUpdater.cs	25	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\WinderUpdater.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\WinderUpdater.cs	27	Active
Error	CS0246	The type or namespace name 'IUpdater' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\WinderUpdater.cs	35	Active
Error	CS0246	The type or namespace name 'IExternalEventHandler' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\WinderUpdater.cs	35	Active
Error	CS0246	The type or namespace name 'UpdaterId' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\WinderUpdater.cs	37	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\WinderUpdater.cs	38	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\WinderUpdater.cs	39	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\WinderUpdater.cs	53	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\WinderUpdater.cs	54	Active
Error	CS0246	The type or namespace name 'AddInId' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\WinderUpdater.cs	54	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\WinderUpdater.cs	88	Active
Error	CS0246	The type or namespace name 'IUpdater' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\WinderUpdater.cs	105	Active
Error	CS0538	'IUpdater' in explicit interface declaration is not an interface	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\WinderUpdater.cs	105	Active
Error	CS0246	The type or namespace name 'UpdaterData' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\WinderUpdater.cs	105	Active
Error	CS0246	The type or namespace name 'IUpdater' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\WinderUpdater.cs	122	Active
Error	CS0538	'IUpdater' in explicit interface declaration is not an interface	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\WinderUpdater.cs	122	Active
Error	CS0246	The type or namespace name 'ChangePriority' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\WinderUpdater.cs	130	Active
Error	CS0246	The type or namespace name 'IUpdater' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\WinderUpdater.cs	130	Active
Error	CS0538	'IUpdater' in explicit interface declaration is not an interface	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\WinderUpdater.cs	130	Active
Error	CS0246	The type or namespace name 'UpdaterId' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\WinderUpdater.cs	138	Active
Error	CS0246	The type or namespace name 'IUpdater' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\WinderUpdater.cs	138	Active
Error	CS0538	'IUpdater' in explicit interface declaration is not an interface	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\WinderUpdater.cs	138	Active
Error	CS0246	The type or namespace name 'IUpdater' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\WinderUpdater.cs	146	Active
Error	CS0538	'IUpdater' in explicit interface declaration is not an interface	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\WinderUpdater.cs	146	Active
Error	CS0246	The type or namespace name 'IExternalEventHandler' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\WinderUpdater.cs	154	Active
Error	CS0538	'IExternalEventHandler' in explicit interface declaration is not an interface	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\WinderUpdater.cs	154	Active
Error	CS0246	The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\WinderUpdater.cs	154	Active
Error	CS0246	The type or namespace name 'IExternalEventHandler' could not be found (are you missing a using directive or an assembly reference?)	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\WinderUpdater.cs	170	Active
Error	CS0538	'IExternalEventHandler' in explicit interface declaration is not an interface	WinderStairs	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\WinderUpdater.cs	170	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\Command.cs	25	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\Command.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\Command.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\Command.cs	36	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\Command.cs	36	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\Command.cs	37	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\Command.cs	37	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\Command.cs	38	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\Command.cs	38	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\Command.cs	39	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\Command.cs	58	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\Command.cs	58	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\Command.cs	60	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreatAlignment.cs	24	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreatAlignment.cs	25	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreatAlignment.cs	38	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreatAlignment.cs	43	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreatAlignment.cs	50	Active
Error	CS0246	The type or namespace name 'View' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreatAlignment.cs	63	Active
Error	CS0246	The type or namespace name 'Face' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreatAlignment.cs	63	Active
Error	CS0246	The type or namespace name 'Face' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreatAlignment.cs	63	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreateDimension.cs	24	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreateDimension.cs	25	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreateDimension.cs	26	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreateDimension.cs	39	Active
Error	CS0246	The type or namespace name 'Application' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreateDimension.cs	44	Active
Error	CS0246	The type or namespace name 'Application' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreateDimension.cs	52	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreateDimension.cs	52	Active
Error	CS0246	The type or namespace name 'Dimension' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreateDimension.cs	67	Active
Error	CS0246	The type or namespace name 'View' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreateDimension.cs	67	Active
Error	CS0246	The type or namespace name 'ReferencePlane' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreateDimension.cs	67	Active
Error	CS0246	The type or namespace name 'ReferencePlane' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreateDimension.cs	67	Active
Error	CS0246	The type or namespace name 'ReferencePlane' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreateDimension.cs	67	Active
Error	CS0246	The type or namespace name 'Dimension' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreateDimension.cs	103	Active
Error	CS0246	The type or namespace name 'View' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreateDimension.cs	103	Active
Error	CS0246	The type or namespace name 'ReferencePlane' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreateDimension.cs	103	Active
Error	CS0246	The type or namespace name 'Face' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreateDimension.cs	103	Active
Error	CS0246	The type or namespace name 'Dimension' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreateDimension.cs	137	Active
Error	CS0246	The type or namespace name 'View' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreateDimension.cs	137	Active
Error	CS0246	The type or namespace name 'Face' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreateDimension.cs	137	Active
Error	CS0246	The type or namespace name 'Face' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreateDimension.cs	137	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreateExtrusion.cs	24	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreateExtrusion.cs	25	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreateExtrusion.cs	26	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreateExtrusion.cs	39	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreateExtrusion.cs	44	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreateExtrusion.cs	49	Active
Error	CS0246	The type or namespace name 'Application' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreateExtrusion.cs	57	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreateExtrusion.cs	57	Active
Error	CS0246	The type or namespace name 'CurveArray' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreateExtrusion.cs	74	Active
Error	CS0246	The type or namespace name 'CurveArray' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreateExtrusion.cs	106	Active
Error	CS0246	The type or namespace name 'CurveArray' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreateExtrusion.cs	106	Active
Error	CS0246	The type or namespace name 'Extrusion' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreateExtrusion.cs	161	Active
Error	CS0246	The type or namespace name 'CurveArrArray' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreateExtrusion.cs	161	Active
Error	CS0246	The type or namespace name 'ReferencePlane' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreateExtrusion.cs	161	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreateReferencePlane.cs	24	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreateReferencePlane.cs	25	Active
Error	CS0246	The type or namespace name 'ReferencePlane' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreateReferencePlane.cs	45	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreateReferencePlane.cs	45	Active
Error	CS0246	The type or namespace name 'ReferencePlane' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreateReferencePlane.cs	45	Active
Error	CS0246	The type or namespace name 'View' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreateReferencePlane.cs	45	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreateReferencePlane.cs	45	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreateReferencePlane.cs	45	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\DoubleHungWinCreation.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\DoubleHungWinCreation.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\DoubleHungWinCreation.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\DoubleHungWinCreation.cs	29	Active
Error	CS0246	The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\DoubleHungWinCreation.cs	42	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\DoubleHungWinCreation.cs	47	Active
Error	CS0246	The type or namespace name 'FamilyManager' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\DoubleHungWinCreation.cs	52	Active
Error	CS0246	The type or namespace name 'ReferencePlane' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\DoubleHungWinCreation.cs	67	Active
Error	CS0246	The type or namespace name 'ReferencePlane' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\DoubleHungWinCreation.cs	72	Active
Error	CS0246	The type or namespace name 'ReferencePlane' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\DoubleHungWinCreation.cs	77	Active
Error	CS0246	The type or namespace name 'ReferencePlane' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\DoubleHungWinCreation.cs	82	Active
Error	CS0246	The type or namespace name 'ReferencePlane' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\DoubleHungWinCreation.cs	87	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\DoubleHungWinCreation.cs	92	Active
Error	CS0246	The type or namespace name 'Category' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\DoubleHungWinCreation.cs	97	Active
Error	CS0246	The type or namespace name 'Category' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\DoubleHungWinCreation.cs	102	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\DoubleHungWinCreation.cs	155	Active
Error	CS0246	The type or namespace name 'FamilyElementVisibility' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\DoubleHungWinCreation.cs	655	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\GeoHelper.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\GeoHelper.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\GeoHelper.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\GeoHelper.cs	29	Active
Error	CS0246	The type or namespace name 'Face' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\GeoHelper.cs	50	Active
Error	CS0246	The type or namespace name 'Wall' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\GeoHelper.cs	50	Active
Error	CS0246	The type or namespace name 'View' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\GeoHelper.cs	50	Active
Error	CS0246	The type or namespace name 'Face' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\GeoHelper.cs	87	Active
Error	CS0246	The type or namespace name 'Extrusion' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\GeoHelper.cs	87	Active
Error	CS0246	The type or namespace name 'View' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\GeoHelper.cs	87	Active
Error	CS0246	The type or namespace name 'Face' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\GeoHelper.cs	122	Active
Error	CS0246	The type or namespace name 'FaceArray' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\GeoHelper.cs	122	Active
Error	CS0246	The type or namespace name 'Face' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\GeoHelper.cs	151	Active
Error	CS0246	The type or namespace name 'FaceArray' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\GeoHelper.cs	151	Active
Error	CS0246	The type or namespace name 'Mesh' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\GeoHelper.cs	182	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\GeoHelper.cs	182	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\GeoHelper.cs	182	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\GeoHelper.cs	182	Active
Error	CS0246	The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\GeoHelper.cs	195	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\GeoHelper.cs	223	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\GeoHelper.cs	223	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\GeoHelper.cs	223	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\GeoHelper.cs	235	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\GeoHelper.cs	235	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\Utility.cs	25	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\Utility.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\Utility.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\Utility.cs	28	Active
Error	CS0246	The type or namespace name 'ReferencePlane' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\Utility.cs	44	Active
Error	CS0246	The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\Utility.cs	44	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\Utility.cs	44	Active
Error	CS0246	The type or namespace name 'View' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\Utility.cs	69	Active
Error	CS0246	The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\Utility.cs	69	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\Utility.cs	69	Active
Error	CS0246	The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\Utility.cs	94	Active
Error	CS0246	The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\Utility.cs	94	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\Utility.cs	94	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\WindowWizard.cs	25	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\WindowWizard.cs	26	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\WindowWizard.cs	48	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	WindowWizard	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\WindowWizard.cs	54	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	WorkThread	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\Application.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	WorkThread	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\Application.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	WorkThread	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\Application.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	WorkThread	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\Application.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	WorkThread	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\Application.cs	32	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	WorkThread	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\Application.cs	33	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	WorkThread	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\Application.cs	34	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	WorkThread	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\Application.cs	35	Active
Error	CS0246	The type or namespace name 'IExternalApplication' could not be found (are you missing a using directive or an assembly reference?)	WorkThread	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\Application.cs	42	Active
Error	CS0246	The type or namespace name 'IdlingEventArgs' could not be found (are you missing a using directive or an assembly reference?)	WorkThread	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\Application.cs	50	Active
Error	CS0246	The type or namespace name 'DocumentChangedEventArgs' could not be found (are you missing a using directive or an assembly reference?)	WorkThread	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\Application.cs	52	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	WorkThread	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\Application.cs	60	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	WorkThread	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\Application.cs	60	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	WorkThread	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\Application.cs	83	Active
Error	CS0246	The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)	WorkThread	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\Application.cs	83	Active
Error	CS0246	The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)	WorkThread	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\Application.cs	100	Active
Error	CS0246	The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)	WorkThread	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\Application.cs	136	Active
Error	CS0246	The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)	WorkThread	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\Application.cs	150	Active
Error	CS0246	The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)	WorkThread	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\Application.cs	167	Active
Error	CS0246	The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)	WorkThread	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\Application.cs	181	Active
Error	CS0246	The type or namespace name 'IdlingEventArgs' could not be found (are you missing a using directive or an assembly reference?)	WorkThread	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\Application.cs	204	Active
Error	CS0246	The type or namespace name 'DocumentChangedEventArgs' could not be found (are you missing a using directive or an assembly reference?)	WorkThread	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\Application.cs	247	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	WorkThread	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\Application.cs	290	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	WorkThread	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\Command.cs	28	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	WorkThread	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\Command.cs	29	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	WorkThread	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\Command.cs	30	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	WorkThread	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\Command.cs	31	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	WorkThread	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\Command.cs	39	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	WorkThread	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\Command.cs	39	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	WorkThread	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\Command.cs	40	Active
Error	CS0103	The name 'Autodesk' does not exist in the current context	WorkThread	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\Command.cs	40	Active
Error	CS0246	The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)	WorkThread	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\Command.cs	41	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	WorkThread	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\Command.cs	59	Active
Error	CS0246	The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)	WorkThread	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\Command.cs	59	Active
Error	CS0246	The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)	WorkThread	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\Command.cs	60	Active
Error	CS0246	The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)	WorkThread	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\Command.cs	104	Active
Error	CS0246	The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)	WorkThread	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\Command.cs	104	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	WorkThread	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\FaceAnalyzer.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	WorkThread	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\FaceAnalyzer.cs	27	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	WorkThread	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\FaceAnalyzer.cs	28	Active
Error	CS0246	The type or namespace name 'View' could not be found (are you missing a using directive or an assembly reference?)	WorkThread	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\FaceAnalyzer.cs	58	Active
Error	CS0246	The type or namespace name 'SpatialFieldManager' could not be found (are you missing a using directive or an assembly reference?)	WorkThread	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\FaceAnalyzer.cs	62	Active
Error	CS0246	The type or namespace name 'View' could not be found (are you missing a using directive or an assembly reference?)	WorkThread	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\FaceAnalyzer.cs	80	Active
Error	CS0246	The type or namespace name 'Reference' could not be found (are you missing a using directive or an assembly reference?)	WorkThread	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\FaceAnalyzer.cs	90	Active
Error	CS0246	The type or namespace name 'Face' could not be found (are you missing a using directive or an assembly reference?)	WorkThread	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\FaceAnalyzer.cs	107	Active
Error	CS0246	The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)	WorkThread	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\FaceAnalyzer.cs	162	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	WorkThread	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\SharedResults.cs	26	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	WorkThread	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\SharedResults.cs	27	Active
Error	CS0246	The type or namespace name 'ValueAtPoint' could not be found (are you missing a using directive or an assembly reference?)	WorkThread	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\SharedResults.cs	42	Active
Error	CS0246	The type or namespace name 'UV' could not be found (are you missing a using directive or an assembly reference?)	WorkThread	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\SharedResults.cs	44	Active
Error	CS0246	The type or namespace name 'UV' could not be found (are you missing a using directive or an assembly reference?)	WorkThread	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\SharedResults.cs	82	Active
Error	CS0246	The type or namespace name 'ValueAtPoint' could not be found (are you missing a using directive or an assembly reference?)	WorkThread	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\SharedResults.cs	82	Active
Error	CS0246	The type or namespace name 'UV' could not be found (are you missing a using directive or an assembly reference?)	WorkThread	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\SharedResults.cs	115	Active
Error	CS0246	The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)	WorkThread	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\ThreadAgent.cs	24	Active
Error	CS0246	The type or namespace name 'BoundingBoxUV' could not be found (are you missing a using directive or an assembly reference?)	WorkThread	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\ThreadAgent.cs	45	Active
Error	CS0246	The type or namespace name 'BoundingBoxUV' could not be found (are you missing a using directive or an assembly reference?)	WorkThread	Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\ThreadAgent.cs	56	Active
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	ExternalResourceDBServer			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	ExternalResourceDBServer			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	ExternalResourceDBServer			
Warning		The referenced component 'RevitAPI' could not be found.	ExternalResourceDBServer			
Warning		The referenced component 'RevitAPIUI' could not be found.	ExternalResourceDBServer			
Warning		The referenced component 'RevitAddInUtility' could not be found.	ExternalResourceDBServer			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	RevitViewer			
Warning		The referenced component 'RevitAPI' could not be found.	RevitViewer			
Warning		The referenced component 'RevitAPIUI' could not be found.	RevitViewer			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	RevitViewer			
Warning		The referenced component 'RevitAPIUI' could not be found.	SchemaWrapperTools			
Warning		The referenced component 'RevitAddInUtility' could not be found.	SchemaWrapperTools			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	SchemaWrapperTools			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	SchemaWrapperTools			
Warning		The referenced component 'RevitAPI' could not be found.	SchemaWrapperTools			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	SchemaWrapperTools			
Warning		The referenced component 'RevitAPIUI' could not be found.	APIAppStartup			
Warning		The referenced component 'RevitAPI' could not be found.	APIAppStartup			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	APIAppStartup			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	APIAppStartup			
Warning		The referenced component 'RevitAddInUtility' could not be found.	APIAppStartup			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	APIAppStartup			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	AddSpaceAndZone			
Warning		The referenced component 'RevitAPIUI' could not be found.	AddSpaceAndZone			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	AddSpaceAndZone			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	AddSpaceAndZone			
Warning		The referenced component 'RevitAPI' could not be found.	AddSpaceAndZone			
Warning		The referenced component 'RevitAddInUtility' could not be found.	AddSpaceAndZone			
Warning		The referenced component 'RevitAddInUtility' could not be found.	AllViews			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	AllViews			
Warning		The referenced component 'RevitAPI' could not be found.	AllViews			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	AllViews			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	AllViews			
Warning		The referenced component 'RevitAPIUI' could not be found.	AllViews			
Warning		The referenced component 'RevitAPIUI' could not be found.	AnalyticalSupportData_Info			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	AnalyticalSupportData_Info			
Warning		The referenced component 'RevitAddInUtility' could not be found.	AnalyticalSupportData_Info			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	AnalyticalSupportData_Info			
Warning		The referenced component 'RevitAPI' could not be found.	AnalyticalSupportData_Info			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	AnalyticalSupportData_Info			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	AnalyticalViewer			
Warning		The referenced component 'RevitAPIUI' could not be found.	AnalyticalViewer			
Warning		The referenced component 'RevitAPI' could not be found.	AnalyticalViewer			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	AnalyticalViewer			
Warning		"C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Csharp.targets" cannot be imported again. It was already imported at "Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\VSProps\SDKSamples.targets (29,3)". This is most likely a build authoring error. This subsequent import will be ignored. [Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\SampleCommandsSteelElements.csproj]	AppearanceAssetEditing			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	AppearanceAssetEditing			
Warning		The referenced component 'RevitAPI' could not be found.	AppearanceAssetEditing			
Warning		The referenced component 'RevitAPIUI' could not be found.	AppearanceAssetEditing			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	AppearanceAssetEditing			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	AppearanceAssetEditing			
Warning		The referenced component 'RevitAddInUtility' could not be found.	AppearanceAssetEditing			
Warning		The referenced component 'RevitAPIUI' could not be found.	ArchSample			
Warning		The referenced component 'RevitAPI' could not be found.	ArchSample			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	ArchSample			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	ArchSample			
Warning		The referenced component 'RevitAddInUtility' could not be found.	AreaReinCurve			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	AreaReinCurve			
Warning		The referenced component 'RevitAPIUI' could not be found.	AreaReinCurve			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	AreaReinCurve			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	AreaReinCurve			
Warning		The referenced component 'RevitAPI' could not be found.	AreaReinCurve			
Warning		The referenced component 'RevitAddInUtility' could not be found.	AreaReinParameters			
Warning		The referenced component 'RevitAPI' could not be found.	AreaReinParameters			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	AreaReinParameters			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	AreaReinParameters			
Warning		The referenced component 'RevitAPIUI' could not be found.	AreaReinParameters			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	AreaReinParameters			
Warning		The referenced component 'RevitAddInUtility' could not be found.	AttachedDetailGroup			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	AttachedDetailGroup			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	AttachedDetailGroup			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	AttachedDetailGroup			
Warning		The referenced component 'RevitAPI' could not be found.	AttachedDetailGroup			
Warning		The referenced component 'RevitAPIUI' could not be found.	AttachedDetailGroup			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	AutoJoin			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	AutoJoin			
Warning		The referenced component 'RevitAddInUtility' could not be found.	AutoJoin			
Warning		The referenced component 'RevitAPI' could not be found.	AutoJoin			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	AutoJoin			
Warning		The referenced component 'RevitAPIUI' could not be found.	AutoJoin			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	AutoParameter			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	AutoParameter			
Warning		The referenced component 'RevitAPI' could not be found.	AutoParameter			
Warning		The referenced component 'RevitAPIUI' could not be found.	AutoParameter			
Warning		The referenced component 'RevitAddInUtility' could not be found.	AutoParameter			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	AutoParameter			
Warning		The referenced component 'RevitAddInUtility' could not be found.	AutoRoute			
Warning		The referenced component 'RevitAPI' could not be found.	AutoRoute			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	AutoRoute			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	AutoRoute			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	AutoRoute			
Warning		The referenced component 'RevitAPIUI' could not be found.	AutoRoute			
Warning		The referenced component 'RevitAPI' could not be found.	AutoStamp			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	AutoStamp			
Warning		The referenced component 'RevitAddInUtility' could not be found.	AutoStamp			
Warning		The referenced component 'RevitAPIUI' could not be found.	AutoStamp			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	AutoStamp			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	AutoStamp			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	AutoTagRooms			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	AutoTagRooms			
Warning		The referenced component 'RevitAddInUtility' could not be found.	AutoTagRooms			
Warning		The referenced component 'RevitAPI' could not be found.	AutoTagRooms			
Warning		The referenced component 'RevitAPIUI' could not be found.	AutoTagRooms			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	AutoTagRooms			
Warning		The referenced component 'RevitAPIUI' could not be found.	AutoUpdate			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	AutoUpdate			
Warning		The referenced component 'RevitAddInUtility' could not be found.	AutoUpdate			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	AutoUpdate			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	AutoUpdate			
Warning		The referenced component 'RevitAPI' could not be found.	AutoUpdate			
Warning		The referenced component 'RevitAddInUtility' could not be found.	AvoidObstruction			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	AvoidObstruction			
Warning		The referenced component 'RevitAPIUI' could not be found.	AvoidObstruction			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	AvoidObstruction			
Warning		The referenced component 'RevitAPI' could not be found.	AvoidObstruction			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	AvoidObstruction			
Warning		The referenced component 'RevitAddInUtility' could not be found.	BRepBuilderExample			
Warning		The referenced component 'RevitAPI' could not be found.	BRepBuilderExample			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	BRepBuilderExample			
Warning		The referenced component 'RevitAPIUI' could not be found.	BRepBuilderExample			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	BRepBuilderExample			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	BRepBuilderExample			
Warning		The referenced component 'RevitAddInUtility' could not be found.	BeamAndSlabNewParameter			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	BeamAndSlabNewParameter			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	BeamAndSlabNewParameter			
Warning		The referenced component 'RevitAPIUI' could not be found.	BeamAndSlabNewParameter			
Warning		The referenced component 'RevitAPI' could not be found.	BeamAndSlabNewParameter			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	BeamAndSlabNewParameter			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	BoundaryConditions			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	BoundaryConditions			
Warning		The referenced component 'RevitAPIUI' could not be found.	BoundaryConditions			
Warning		The referenced component 'RevitAPI' could not be found.	BoundaryConditions			
Warning		The referenced component 'RevitAddInUtility' could not be found.	BoundaryConditions			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	BoundaryConditions			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	BrowseBindings			
Warning		The referenced component 'RevitAPIUI' could not be found.	BrowseBindings			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	BrowseBindings			
Warning		The referenced component 'RevitAPI' could not be found.	BrowseBindings			
Warning		The referenced component 'RevitAPIUI' could not be found.	CancelSave			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	CancelSave			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	CancelSave			
Warning		The referenced component 'RevitAPI' could not be found.	CancelSave			
Warning		The referenced component 'RevitAddInUtility' could not be found.	CancelSave			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	CancelSave			
Warning		The referenced component 'RevitAPI' could not be found.	CapitalizeAllTextNotes			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	CapitalizeAllTextNotes			
Warning		The referenced component 'RevitAddInUtility' could not be found.	CapitalizeAllTextNotes			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	CapitalizeAllTextNotes			
Warning		The referenced component 'RevitAPIUI' could not be found.	CapitalizeAllTextNotes			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	CapitalizeAllTextNotes			
Warning		The referenced component 'RevitAddInUtility' could not be found.	ChangesMonitor			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	ChangesMonitor			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	ChangesMonitor			
Warning		The referenced component 'RevitAPIUI' could not be found.	ChangesMonitor			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	ChangesMonitor			
Warning		The referenced component 'RevitAPI' could not be found.	ChangesMonitor			
Warning		The referenced component 'RevitAPIUI' could not be found.	CompoundStructure			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	CompoundStructure			
Warning		The referenced component 'RevitAPI' could not be found.	CompoundStructure			
Warning		The referenced component 'RevitAddInUtility' could not be found.	CompoundStructure			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	CompoundStructure			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	CompoundStructure			
Warning		The referenced component 'RevitAddInUtility' could not be found.	CreateAirHandler			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	CreateAirHandler			
Warning		The referenced component 'RevitAPIUI' could not be found.	CreateAirHandler			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	CreateAirHandler			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	CreateAirHandler			
Warning		The referenced component 'RevitAPI' could not be found.	CreateAirHandler			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	CreateBeamSystem			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	CreateBeamSystem			
Warning		The referenced component 'RevitAPI' could not be found.	CreateBeamSystem			
Warning		The referenced component 'RevitAddInUtility' could not be found.	CreateBeamSystem			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	CreateBeamSystem			
Warning		The referenced component 'RevitAPIUI' could not be found.	CreateBeamSystem			
Warning		The referenced component 'RevitAPI' could not be found.	CreateBeamsColumnsBraces (CreateBeamsColumnsBraces\CS\CreateBeamsColumnsBraces)			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	CreateBeamsColumnsBraces (CreateBeamsColumnsBraces\CS\CreateBeamsColumnsBraces)			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	CreateBeamsColumnsBraces (CreateBeamsColumnsBraces\CS\CreateBeamsColumnsBraces)			
Warning		The referenced component 'RevitAPIUI' could not be found.	CreateBeamsColumnsBraces (CreateBeamsColumnsBraces\CS\CreateBeamsColumnsBraces)			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	CreateBeamsColumnsBraces (CreateBeamsColumnsBraces\CS\CreateBeamsColumnsBraces)			
Warning		The referenced component 'RevitAddInUtility' could not be found.	CreateBeamsColumnsBraces (CreateBeamsColumnsBraces\CS\CreateBeamsColumnsBraces)			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	CreateBeamsColumnsBraces (CreateBeamsColumnsBraces\VB.NET\CreateBeamsColumnsBraces)			
Warning		The referenced component 'RevitAPIUI' could not be found.	CreateBeamsColumnsBraces (CreateBeamsColumnsBraces\VB.NET\CreateBeamsColumnsBraces)			
Warning		The referenced component 'RevitAPI' could not be found.	CreateBeamsColumnsBraces (CreateBeamsColumnsBraces\VB.NET\CreateBeamsColumnsBraces)			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	CreateBeamsColumnsBraces (CreateBeamsColumnsBraces\VB.NET\CreateBeamsColumnsBraces)			
Warning		The referenced component 'RevitAddInUtility' could not be found.	CreateComplexAreaRein			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	CreateComplexAreaRein			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	CreateComplexAreaRein			
Warning		The referenced component 'RevitAPIUI' could not be found.	CreateComplexAreaRein			
Warning		The referenced component 'RevitAPI' could not be found.	CreateComplexAreaRein			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	CreateComplexAreaRein			
Warning		The referenced component 'RevitAddInUtility' could not be found.	CreateDimensions			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	CreateDimensions			
Warning		The referenced component 'RevitAPIUI' could not be found.	CreateDimensions			
Warning		The referenced component 'RevitAPI' could not be found.	CreateDimensions			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	CreateDimensions			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	CreateDimensions			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	CreateFillPattern			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	CreateFillPattern			
Warning		The referenced component 'RevitAPIUI' could not be found.	CreateFillPattern			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	CreateFillPattern			
Warning		The referenced component 'RevitAddInUtility' could not be found.	CreateFillPattern			
Warning		The referenced component 'RevitAPI' could not be found.	CreateFillPattern			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	CreateShared			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	CreateShared			
Warning		The referenced component 'RevitAPIUI' could not be found.	CreateShared			
Warning		The referenced component 'RevitAPI' could not be found.	CreateShared			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	CreateSimpleAreaRein			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	CreateSimpleAreaRein			
Warning		The referenced component 'RevitAPIUI' could not be found.	CreateSimpleAreaRein			
Warning		The referenced component 'RevitAddInUtility' could not be found.	CreateSimpleAreaRein			
Warning		The referenced component 'RevitAPI' could not be found.	CreateSimpleAreaRein			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	CreateSimpleAreaRein			
Warning		The referenced component 'RevitAPIUI' could not be found.	CreateTrianglesTopography			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	CreateTrianglesTopography			
Warning		The referenced component 'RevitAPI' could not be found.	CreateTrianglesTopography			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	CreateTrianglesTopography			
Warning		The referenced component 'RevitAddInUtility' could not be found.	CreateTrianglesTopography			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	CreateTrianglesTopography			
Warning		The referenced component 'RevitAPIUI' could not be found.	CreateTruss			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	CreateTruss			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	CreateTruss			
Warning		The referenced component 'RevitAPI' could not be found.	CreateTruss			
Warning		The referenced component 'RevitAddInUtility' could not be found.	CreateTruss			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	CreateTruss			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	CreateViewSection			
Warning		The referenced component 'RevitAPI' could not be found.	CreateViewSection			
Warning		The referenced component 'RevitAddInUtility' could not be found.	CreateViewSection			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	CreateViewSection			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	CreateViewSection			
Warning		The referenced component 'RevitAPIUI' could not be found.	CreateViewSection			
Warning		The referenced component 'RevitAPIUI' could not be found.	CreateWallinBeamProfile			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	CreateWallinBeamProfile			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	CreateWallinBeamProfile			
Warning		The referenced component 'RevitAddInUtility' could not be found.	CreateWallinBeamProfile			
Warning		The referenced component 'RevitAPI' could not be found.	CreateWallinBeamProfile			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	CreateWallinBeamProfile			
Warning		The referenced component 'RevitAPIUI' could not be found.	CreateWallsUnderBeams			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	CreateWallsUnderBeams			
Warning		The referenced component 'RevitAddInUtility' could not be found.	CreateWallsUnderBeams			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	CreateWallsUnderBeams			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	CreateWallsUnderBeams			
Warning		The referenced component 'RevitAPI' could not be found.	CreateWallsUnderBeams			
Warning		The referenced component 'RevitAddInUtility' could not be found.	CurtainSystem			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	CurtainSystem			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	CurtainSystem			
Warning		The referenced component 'RevitAPI' could not be found.	CurtainSystem			
Warning		The referenced component 'RevitAPIUI' could not be found.	CurtainSystem			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	CurtainSystem			
Warning		The referenced component 'RevitAPIUI' could not be found.	CurtainWallGrid			
Warning		The referenced component 'RevitAPI' could not be found.	CurtainWallGrid			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	CurtainWallGrid			
Warning		The referenced component 'RevitAddInUtility' could not be found.	CurtainWallGrid			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	CurtainWallGrid			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	CurtainWallGrid			
Warning		The referenced component 'RevitAPI' could not be found.	CurvedBeam			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	CurvedBeam			
Warning		The referenced component 'RevitAddInUtility' could not be found.	CurvedBeam			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	CurvedBeam			
Warning		The referenced component 'RevitAPIUI' could not be found.	CurvedBeam			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	CurvedBeam			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	Custom2DExporter			
Warning		The referenced component 'RevitAPIUI' could not be found.	Custom2DExporter			
Warning		The referenced component 'RevitAddInUtility' could not be found.	Custom2DExporter			
Warning		The referenced component 'RevitAPI' could not be found.	Custom2DExporter			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	Custom2DExporter			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	Custom2DExporter			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	DWGFamilyCreation			
Warning		The referenced component 'RevitAPI' could not be found.	DWGFamilyCreation			
Warning		The referenced component 'RevitAddInUtility' could not be found.	DWGFamilyCreation			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	DWGFamilyCreation			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	DWGFamilyCreation			
Warning		The referenced component 'RevitAPIUI' could not be found.	DWGFamilyCreation			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	DatumsModification			
Warning		The referenced component 'RevitAPI' could not be found.	DatumsModification			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	DatumsModification			
Warning		The referenced component 'RevitAddInUtility' could not be found.	DatumsModification			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	DatumsModification			
Warning		The referenced component 'RevitAPIUI' could not be found.	DatumsModification			
Warning		The referenced component 'RevitAddInUtility' could not be found.	DeckProperties			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	DeckProperties			
Warning		The referenced component 'RevitAPIUI' could not be found.	DeckProperties			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	DeckProperties			
Warning		The referenced component 'RevitAPI' could not be found.	DeckProperties			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	DeckProperties			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	DeleteDimensions			
Warning		The referenced component 'RevitAPI' could not be found.	DeleteDimensions			
Warning		The referenced component 'RevitAddInUtility' could not be found.	DeleteDimensions			
Warning		The referenced component 'RevitAPIUI' could not be found.	DeleteDimensions			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	DeleteDimensions			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	DeleteDimensions			
Warning		The referenced component 'RevitAPIUI' could not be found.	DeleteObject (DeleteObject\CS\DeleteObject)			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	DeleteObject (DeleteObject\CS\DeleteObject)			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	DeleteObject (DeleteObject\CS\DeleteObject)			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	DeleteObject (DeleteObject\CS\DeleteObject)			
Warning		The referenced component 'RevitAddInUtility' could not be found.	DeleteObject (DeleteObject\CS\DeleteObject)			
Warning		The referenced component 'RevitAPI' could not be found.	DeleteObject (DeleteObject\CS\DeleteObject)			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	DeleteObject (DeleteObject\VB.NET\DeleteObject)			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	DeleteObject (DeleteObject\VB.NET\DeleteObject)			
Warning		The referenced component 'RevitAPI' could not be found.	DeleteObject (DeleteObject\VB.NET\DeleteObject)			
Warning		The referenced component 'RevitAPIUI' could not be found.	DeleteObject (DeleteObject\VB.NET\DeleteObject)			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	DesignOptionReader			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	DesignOptionReader			
Warning		The referenced component 'RevitAPI' could not be found.	DesignOptionReader			
Warning		The referenced component 'RevitAPIUI' could not be found.	DesignOptionReader			
Warning		The referenced component 'RevitAPIUI' could not be found.	DimensionLeaderEnd			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	DimensionLeaderEnd			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	DimensionLeaderEnd			
Warning		The referenced component 'RevitAddInUtility' could not be found.	DimensionLeaderEnd			
Warning		The referenced component 'RevitAPI' could not be found.	DimensionLeaderEnd			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	DimensionLeaderEnd			
Warning		The referenced component 'RevitAPI' could not be found.	DirectionCalculation			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	DirectionCalculation			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	DirectionCalculation			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	DirectionCalculation			
Warning		The referenced component 'RevitAPIUI' could not be found.	DirectionCalculation			
Warning		The referenced component 'RevitAddInUtility' could not be found.	DirectionCalculation			
Warning		The referenced component 'RevitAPIUI' could not be found.	DisableCommand			
Warning		The referenced component 'RevitAPI' could not be found.	DisableCommand			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	DisableCommand			
Warning		The referenced component 'RevitAddInUtility' could not be found.	DisableCommand			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	DisableCommand			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	DisableCommand			
Warning		The referenced component 'RevitAddInUtility' could not be found.	DisplacementElementAnimation			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	DisplacementElementAnimation			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	DisplacementElementAnimation			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	DisplacementElementAnimation			
Warning		The referenced component 'RevitAPI' could not be found.	DisplacementElementAnimation			
Warning		The referenced component 'RevitAPIUI' could not be found.	DisplacementElementAnimation			
Warning		The referenced component 'RevitAddInUtility' could not be found.	DistanceToPanels			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	DistanceToPanels			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	DistanceToPanels			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	DistanceToPanels			
Warning		The referenced component 'RevitAPIUI' could not be found.	DistanceToPanels			
Warning		The referenced component 'RevitAPI' could not be found.	DistanceToPanels			
Warning		The referenced component 'RevitAPI' could not be found.	DistanceToSurfaces			
Warning		The referenced component 'RevitAPIUI' could not be found.	DistanceToSurfaces			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	DistanceToSurfaces			
Warning		The referenced component 'RevitAddInUtility' could not be found.	DistanceToSurfaces			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	DistanceToSurfaces			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	DistanceToSurfaces			
Warning		The referenced component 'RevitAddInUtility' could not be found.	DividedSurfaceByIntersects			
Warning		The referenced component 'RevitAPIUI' could not be found.	DividedSurfaceByIntersects			
Warning		The referenced component 'RevitAPI' could not be found.	DividedSurfaceByIntersects			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	DividedSurfaceByIntersects			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	DividedSurfaceByIntersects			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	DividedSurfaceByIntersects			
Warning		The referenced component 'RevitAPIUI' could not be found.	DockableDialogs			
Warning		The referenced component 'RevitAPI' could not be found.	DockableDialogs			
Warning		The referenced component 'RevitAddInUtility' could not be found.	DockableDialogs			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	DockableDialogs			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	DockableDialogs			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	DockableDialogs			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	DoorSwing			
Warning		The referenced component 'RevitAddInUtility' could not be found.	DoorSwing			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	DoorSwing			
Warning		The referenced component 'RevitAPIUI' could not be found.	DoorSwing			
Warning		The referenced component 'RevitAPI' could not be found.	DoorSwing			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	DoorSwing			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	DuplicateGraphics			
Warning		The referenced component 'RevitAddInUtility' could not be found.	DuplicateGraphics			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	DuplicateGraphics			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	DuplicateGraphics			
Warning		The referenced component 'RevitAPI' could not be found.	DuplicateGraphics			
Warning		The referenced component 'RevitAPIUI' could not be found.	DuplicateGraphics			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	DuplicateViews			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	DuplicateViews			
Warning		The referenced component 'RevitAPI' could not be found.	DuplicateViews			
Warning		The referenced component 'RevitAddInUtility' could not be found.	DuplicateViews			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	DuplicateViews			
Warning		The referenced component 'RevitAPIUI' could not be found.	DuplicateViews			
Warning		The referenced component 'RevitAPI' could not be found.	DynamicModelUpdate			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	DynamicModelUpdate			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	DynamicModelUpdate			
Warning		The referenced component 'RevitAPIUI' could not be found.	DynamicModelUpdate			
Warning		The referenced component 'RevitAddInUtility' could not be found.	DynamicModelUpdate			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	DynamicModelUpdate			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	ElementViewer			
Warning		The referenced component 'RevitAPI' could not be found.	ElementViewer			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	ElementViewer			
Warning		The referenced component 'RevitAPIUI' could not be found.	ElementViewer			
Warning		The referenced component 'RevitAPI' could not be found.	EnergyAnalysisModel			
Warning		The referenced component 'RevitAPIUI' could not be found.	EnergyAnalysisModel			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	EnergyAnalysisModel			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	EnergyAnalysisModel			
Warning		The referenced component 'RevitAddInUtility' could not be found.	EnergyAnalysisModel			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	EnergyAnalysisModel			
Warning		The referenced component 'RevitAPIUI' could not be found.	ErrorHandling			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	ErrorHandling			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	ErrorHandling			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	ErrorHandling			
Warning		The referenced component 'RevitAPI' could not be found.	ErrorHandling			
Warning		The referenced component 'RevitAddInUtility' could not be found.	ErrorHandling			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	EventsMonitor			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	EventsMonitor			
Warning		The referenced component 'RevitAPI' could not be found.	EventsMonitor			
Warning		The referenced component 'RevitAPIUI' could not be found.	EventsMonitor			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	EventsMonitor			
Warning		The referenced component 'RevitAddInUtility' could not be found.	EventsMonitor			
Warning		The referenced component 'RevitAPI' could not be found.	ExtensibleStorageManager			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	ExtensibleStorageManager			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	ExtensibleStorageManager			
Warning		The referenced component 'RevitAPIUI' could not be found.	ExtensibleStorageManager			
Warning		The referenced component 'RevitAddInUtility' could not be found.	ExtensibleStorageManager			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	ExtensibleStorageManager			
Warning		The referenced component 'RevitAPI' could not be found.	ExtensibleStorageUtility			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	ExtensibleStorageUtility			
Warning		The referenced component 'RevitAddInUtility' could not be found.	ExtensibleStorageUtility			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	ExtensibleStorageUtility			
Warning		The referenced component 'RevitAPIUI' could not be found.	ExtensibleStorageUtility			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	ExtensibleStorageUtility			
Warning		The referenced component 'RevitAPI' could not be found.	ExternalCommandRegistration			
Warning		The referenced component 'RevitAPIUI' could not be found.	ExternalCommandRegistration			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	ExternalCommandRegistration			
Warning		The referenced component 'RevitAddInUtility' could not be found.	ExternalCommandRegistration			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	ExternalCommandRegistration			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	ExternalCommandRegistration			
Warning		The referenced component 'RevitAPIUI' could not be found.	ExternalResourceUIServer			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	ExternalResourceUIServer			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	ExternalResourceUIServer			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	ExternalResourceUIServer			
Warning		The referenced component 'RevitAPI' could not be found.	ExternalResourceUIServer			
Warning		The referenced component 'RevitAddInUtility' could not be found.	ExternalResourceUIServer			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	FabricationPartLayout			
Warning		The referenced component 'RevitAddInUtility' could not be found.	FabricationPartLayout			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	FabricationPartLayout			
Warning		The referenced component 'RevitAPI' could not be found.	FabricationPartLayout			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	FabricationPartLayout			
Warning		The referenced component 'RevitAPIUI' could not be found.	FabricationPartLayout			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	FamilyParametersOrder			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	FamilyParametersOrder			
Warning		The referenced component 'RevitAddInUtility' could not be found.	FamilyParametersOrder			
Warning		The referenced component 'RevitAPI' could not be found.	FamilyParametersOrder			
Warning		The referenced component 'RevitAPIUI' could not be found.	FamilyParametersOrder			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	FamilyParametersOrder			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	FindColumns			
Warning		The referenced component 'RevitAPI' could not be found.	FindColumns			
Warning		The referenced component 'RevitAddInUtility' could not be found.	FindColumns			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	FindColumns			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	FindColumns			
Warning		The referenced component 'RevitAPIUI' could not be found.	FindColumns			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	FireRating			
Warning		The referenced component 'RevitAPI' could not be found.	FireRating			
Warning		The referenced component 'RevitAPIUI' could not be found.	FireRating			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	FireRating			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	FoundationSlab			
Warning		The referenced component 'RevitAPIUI' could not be found.	FoundationSlab			
Warning		The referenced component 'RevitAPI' could not be found.	FoundationSlab			
Warning		The referenced component 'RevitAddInUtility' could not be found.	FoundationSlab			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	FoundationSlab			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	FoundationSlab			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	FrameBuilder			
Warning		The referenced component 'RevitAPIUI' could not be found.	FrameBuilder			
Warning		Could not find rule set file "Migrated rules for FrameBuilder.ruleset".	FrameBuilder			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	FrameBuilder			
Warning		The referenced component 'RevitAPI' could not be found.	FrameBuilder			
Warning		The referenced component 'RevitAddInUtility' could not be found.	FrameBuilder			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	FrameBuilder			
Warning		The referenced component 'RevitAPI' could not be found.	FreeFormElement			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	FreeFormElement			
Warning		The referenced component 'RevitAddInUtility' could not be found.	FreeFormElement			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	FreeFormElement			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	FreeFormElement			
Warning		The referenced component 'RevitAPIUI' could not be found.	FreeFormElement			
Warning		The referenced component 'RevitAPIUI' could not be found.	GenerateFloor			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	GenerateFloor			
Warning		The referenced component 'RevitAPI' could not be found.	GenerateFloor			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	GenerateFloor			
Warning		The referenced component 'RevitAddInUtility' could not be found.	GenerateFloor			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	GenerateFloor			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	GenericModelCreation			
Warning		The referenced component 'RevitAPI' could not be found.	GenericModelCreation			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	GenericModelCreation			
Warning		The referenced component 'RevitAPIUI' could not be found.	GenericModelCreation			
Warning		The referenced component 'RevitAddInUtility' could not be found.	GenericModelCreation			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	GenericModelCreation			
Warning		The referenced component 'RevitAddInUtility' could not be found.	GenericStructuralConnection			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	GenericStructuralConnection			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	GenericStructuralConnection			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	GenericStructuralConnection			
Warning		The referenced component 'RevitAPIUI' could not be found.	GenericStructuralConnection			
Warning		The referenced component 'RevitAPI' could not be found.	GenericStructuralConnection			
Warning		The referenced component 'RevitAPIUI' could not be found.	GeometryCreation_BooleanOperation			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	GeometryCreation_BooleanOperation			
Warning		The referenced component 'RevitAddInUtility' could not be found.	GeometryCreation_BooleanOperation			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	GeometryCreation_BooleanOperation			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	GeometryCreation_BooleanOperation			
Warning		Could not find rule set file "GeometryCreation_BooleanOperation.ruleset".	GeometryCreation_BooleanOperation			
Warning		The referenced component 'RevitAPI' could not be found.	GeometryCreation_BooleanOperation			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	GetSetDefaultTypes			
Warning		The referenced component 'RevitAPI' could not be found.	GetSetDefaultTypes			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	GetSetDefaultTypes			
Warning		The referenced component 'RevitAPIUI' could not be found.	GetSetDefaultTypes			
Warning		The referenced component 'RevitAddInUtility' could not be found.	GetSetDefaultTypes			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	GetSetDefaultTypes			
Warning		The referenced component 'RevitAddInUtility' could not be found.	GridCreation			
Warning		The referenced component 'RevitAPIUI' could not be found.	GridCreation			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	GridCreation			
Warning		The referenced component 'RevitAPI' could not be found.	GridCreation			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	GridCreation			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	GridCreation			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	HelloRevit (HelloRevit\CS\HelloRevit)			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	HelloRevit (HelloRevit\CS\HelloRevit)			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	HelloRevit (HelloRevit\CS\HelloRevit)			
Warning		The referenced component 'RevitAddInUtility' could not be found.	HelloRevit (HelloRevit\CS\HelloRevit)			
Warning		The referenced component 'RevitAPI' could not be found.	HelloRevit (HelloRevit\CS\HelloRevit)			
Warning		The referenced component 'RevitAPIUI' could not be found.	HelloRevit (HelloRevit\CS\HelloRevit)			
Warning		The referenced component 'RevitAPI' could not be found.	HelloRevit (HelloRevit\VB.NET\HelloRevit)			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	HelloRevit (HelloRevit\VB.NET\HelloRevit)			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	HelloRevit (HelloRevit\VB.NET\HelloRevit)			
Warning		The referenced component 'RevitAPIUI' could not be found.	HelloRevit (HelloRevit\VB.NET\HelloRevit)			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	ImportExport			
Warning		The referenced component 'RevitAPIUI' could not be found.	ImportExport			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	ImportExport			
Warning		The referenced component 'RevitAPI' could not be found.	ImportExport			
Warning		The referenced component 'RevitAddInUtility' could not be found.	ImportExport			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	ImportExport			
Warning		The referenced component 'RevitAPIUI' could not be found.	InPlaceMembers			
Warning		The referenced component 'RevitAddInUtility' could not be found.	InPlaceMembers			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	InPlaceMembers			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	InPlaceMembers			
Warning		The referenced component 'RevitAPI' could not be found.	InPlaceMembers			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	InPlaceMembers			
Warning		The referenced component 'RevitAddInUtility' could not be found.	InvisibleParam			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	InvisibleParam			
Warning		The referenced component 'RevitAPI' could not be found.	InvisibleParam			
Warning		The referenced component 'RevitAPIUI' could not be found.	InvisibleParam			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	InvisibleParam			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	InvisibleParam			
Warning		The referenced component 'RevitAddInUtility' could not be found.	Journaling			
Warning		The referenced component 'RevitAPIUI' could not be found.	Journaling			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	Journaling			
Warning		The referenced component 'RevitAPI' could not be found.	Journaling			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	Journaling			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	Journaling			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	LevelsProperty			
Warning		The referenced component 'RevitAPIUI' could not be found.	LevelsProperty			
Warning		The referenced component 'RevitAPI' could not be found.	LevelsProperty			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	LevelsProperty			
Warning		The referenced component 'RevitAddInUtility' could not be found.	LevelsProperty			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	LevelsProperty			
Warning		The referenced component 'RevitAddInUtility' could not be found.	Loads			
Warning		The referenced component 'RevitAPIUI' could not be found.	Loads			
Warning		The referenced component 'RevitAPI' could not be found.	Loads			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	Loads			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	Loads			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	Loads			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	ManipulateForm			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	ManipulateForm			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	ManipulateForm			
Warning		The referenced component 'RevitAddInUtility' could not be found.	ManipulateForm			
Warning		The referenced component 'RevitAPIUI' could not be found.	ManipulateForm			
Warning		The referenced component 'RevitAPI' could not be found.	ManipulateForm			
Warning		The referenced component 'RevitAPIUI' could not be found.	MaterialProperties (MaterialProperties\CS\MaterialProperties)			
Warning		The referenced component 'RevitAPI' could not be found.	MaterialProperties (MaterialProperties\CS\MaterialProperties)			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	MaterialProperties (MaterialProperties\CS\MaterialProperties)			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	MaterialProperties (MaterialProperties\CS\MaterialProperties)			
Warning		The referenced component 'RevitAddInUtility' could not be found.	MaterialProperties (MaterialProperties\CS\MaterialProperties)			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	MaterialProperties (MaterialProperties\CS\MaterialProperties)			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	MaterialProperties (MaterialProperties\VB.NET\MaterialProperties)			
Warning		The referenced component 'RevitAPIUI' could not be found.	MaterialProperties (MaterialProperties\VB.NET\MaterialProperties)			
Warning		The referenced component 'RevitAPI' could not be found.	MaterialProperties (MaterialProperties\VB.NET\MaterialProperties)			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	MaterialProperties (MaterialProperties\VB.NET\MaterialProperties)			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	MaterialQuantities			
Warning		The referenced component 'RevitAPI' could not be found.	MaterialQuantities			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	MaterialQuantities			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	MaterialQuantities			
Warning		The referenced component 'RevitAddInUtility' could not be found.	MaterialQuantities			
Warning		The referenced component 'RevitAPIUI' could not be found.	MaterialQuantities			
Warning		The referenced component 'RevitAPIUI' could not be found.	MeasureHeight			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	MeasureHeight			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	MeasureHeight			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	MeasureHeight			
Warning		The referenced component 'RevitAPI' could not be found.	MeasureHeight			
Warning		The referenced component 'RevitAddInUtility' could not be found.	MeasureHeight			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	MeasurePanelArea			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	MeasurePanelArea			
Warning		The referenced component 'RevitAPIUI' could not be found.	MeasurePanelArea			
Warning		The referenced component 'RevitAddInUtility' could not be found.	MeasurePanelArea			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	MeasurePanelArea			
Warning		The referenced component 'RevitAPI' could not be found.	MeasurePanelArea			
Warning		The referenced component 'RevitAPI' could not be found.	ModelLines			
Warning		The referenced component 'RevitAddInUtility' could not be found.	ModelLines			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	ModelLines			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	ModelLines			
Warning		The referenced component 'RevitAPIUI' could not be found.	ModelLines			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	ModelLines			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	ModelessForm_ExternalEvent			
Warning		The referenced component 'RevitAPI' could not be found.	ModelessForm_ExternalEvent			
Warning		The referenced component 'RevitAddInUtility' could not be found.	ModelessForm_ExternalEvent			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	ModelessForm_ExternalEvent			
Warning		The referenced component 'RevitAPIUI' could not be found.	ModelessForm_ExternalEvent			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	ModelessForm_ExternalEvent			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	ModelessForm_IdlingEvent			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	ModelessForm_IdlingEvent			
Warning		The referenced component 'RevitAddInUtility' could not be found.	ModelessForm_IdlingEvent			
Warning		The referenced component 'RevitAPIUI' could not be found.	ModelessForm_IdlingEvent			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	ModelessForm_IdlingEvent			
Warning		The referenced component 'RevitAPI' could not be found.	ModelessForm_IdlingEvent			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	MoveLinear			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	MoveLinear			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	MoveLinear			
Warning		The referenced component 'RevitAPI' could not be found.	MoveLinear			
Warning		The referenced component 'RevitAddInUtility' could not be found.	MoveLinear			
Warning		The referenced component 'RevitAPIUI' could not be found.	MoveLinear			
Warning		The referenced component 'RevitAPIUI' could not be found.	MultiplanarRebar			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	MultiplanarRebar			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	MultiplanarRebar			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	MultiplanarRebar			
Warning		The referenced component 'RevitAddInUtility' could not be found.	MultiplanarRebar			
Warning		The referenced component 'RevitAPI' could not be found.	MultiplanarRebar			
Warning		The referenced component 'RevitAPIUI' could not be found.	MultithreadedCalculation			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	MultithreadedCalculation			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	MultithreadedCalculation			
Warning		The referenced component 'RevitAPI' could not be found.	MultithreadedCalculation			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	MultithreadedCalculation			
Warning		The referenced component 'RevitAddInUtility' could not be found.	MultithreadedCalculation			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	NewForm			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	NewForm			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	NewForm			
Warning		The referenced component 'RevitAddInUtility' could not be found.	NewForm			
Warning		The referenced component 'RevitAPIUI' could not be found.	NewForm			
Warning		The referenced component 'RevitAPI' could not be found.	NewForm			
Warning		The referenced component 'RevitAPI' could not be found.	NewHostedSweep			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	NewHostedSweep			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	NewHostedSweep			
Warning		The referenced component 'RevitAPIUI' could not be found.	NewHostedSweep			
Warning		The referenced component 'RevitAddInUtility' could not be found.	NewHostedSweep			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	NewHostedSweep			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	NewOpenings			
Warning		The referenced component 'RevitAPIUI' could not be found.	NewOpenings			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	NewOpenings			
Warning		The referenced component 'RevitAddInUtility' could not be found.	NewOpenings			
Warning		The referenced component 'RevitAPI' could not be found.	NewOpenings			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	NewOpenings			
Warning		The referenced component 'RevitAddInUtility' could not be found.	NewPathReinforcement			
Warning		The referenced component 'RevitAPI' could not be found.	NewPathReinforcement			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	NewPathReinforcement			
Warning		The referenced component 'RevitAPIUI' could not be found.	NewPathReinforcement			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	NewPathReinforcement			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	NewPathReinforcement			
Warning		The referenced component 'RevitAPI' could not be found.	NewRebar			
Warning		The referenced component 'RevitAPIUI' could not be found.	NewRebar			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	NewRebar			
Warning		The referenced component 'RevitAddInUtility' could not be found.	NewRebar			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	NewRebar			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	NewRebar			
Warning		The referenced component 'RevitAPI' could not be found.	NewRoof			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	NewRoof			
Warning		The referenced component 'RevitAPIUI' could not be found.	NewRoof			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	NewRoof			
Warning		The referenced component 'RevitAddInUtility' could not be found.	NewRoof			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	NewRoof			
Warning		The referenced component 'RevitAPI' could not be found.	ObjectViewer			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	ObjectViewer			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	ObjectViewer			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	ObjectViewer			
Warning		The referenced component 'RevitAPIUI' could not be found.	ObjectViewer			
Warning		The referenced component 'RevitAddInUtility' could not be found.	ObjectViewer			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	Openings			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	Openings			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	Openings			
Warning		The referenced component 'RevitAPIUI' could not be found.	Openings			
Warning		The referenced component 'RevitAddInUtility' could not be found.	Openings			
Warning		The referenced component 'RevitAPI' could not be found.	Openings			
Warning		The referenced component 'RevitAPIUI' could not be found.	PanelEdgeLengthAngle			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	PanelEdgeLengthAngle			
Warning		The referenced component 'RevitAPI' could not be found.	PanelEdgeLengthAngle			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	PanelEdgeLengthAngle			
Warning		The referenced component 'RevitAddInUtility' could not be found.	PanelEdgeLengthAngle			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	PanelEdgeLengthAngle			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	PanelSchedule			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	PanelSchedule			
Warning		The referenced component 'RevitAPIUI' could not be found.	PanelSchedule			
Warning		The referenced component 'RevitAPI' could not be found.	PanelSchedule			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	PanelSchedule			
Warning		The referenced component 'RevitAddInUtility' could not be found.	PanelSchedule			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	ParameterUtils			
Warning		The referenced component 'RevitAddInUtility' could not be found.	ParameterUtils			
Warning		The referenced component 'RevitAPIUI' could not be found.	ParameterUtils			
Warning		The referenced component 'RevitAPI' could not be found.	ParameterUtils			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	ParameterUtils			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	ParameterUtils			
Warning		The referenced component 'RevitAPI' could not be found.	ParameterValuesFromImage			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	ParameterValuesFromImage			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	ParameterValuesFromImage			
Warning		The referenced component 'RevitAPIUI' could not be found.	ParameterValuesFromImage			
Warning		The referenced component 'RevitAddInUtility' could not be found.	ParameterValuesFromImage			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	ParameterValuesFromImage			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	PathOfTravel			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	PathOfTravel			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	PathOfTravel			
Warning		The referenced component 'RevitAddInUtility' could not be found.	PathOfTravel			
Warning		The referenced component 'RevitAPIUI' could not be found.	PathOfTravel			
Warning		The referenced component 'RevitAPI' could not be found.	PathOfTravel			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	PathReinforcement			
Warning		The referenced component 'RevitAddInUtility' could not be found.	PathReinforcement			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	PathReinforcement			
Warning		The referenced component 'RevitAPI' could not be found.	PathReinforcement			
Warning		The referenced component 'RevitAPIUI' could not be found.	PathReinforcement			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	PathReinforcement			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	PerformanceAdviserControl			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	PerformanceAdviserControl			
Warning		The referenced component 'RevitAPIUI' could not be found.	PerformanceAdviserControl			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	PerformanceAdviserControl			
Warning		The referenced component 'RevitAPI' could not be found.	PerformanceAdviserControl			
Warning		The referenced component 'RevitAddInUtility' could not be found.	PerformanceAdviserControl			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	PhaseSample			
Warning		The referenced component 'RevitAPI' could not be found.	PhaseSample			
Warning		The referenced component 'RevitAPIUI' could not be found.	PhaseSample			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	PhaseSample			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	PhysicalProp			
Warning		The referenced component 'RevitAPI' could not be found.	PhysicalProp			
Warning		The referenced component 'RevitAPIUI' could not be found.	PhysicalProp			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	PhysicalProp			
Warning		The referenced component 'RevitAddInUtility' could not be found.	PhysicalProp			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	PhysicalProp			
Warning		The referenced component 'RevitAddInUtility' could not be found.	PlaceFamilyInstanceByFace			
Warning		The referenced component 'RevitAPIUI' could not be found.	PlaceFamilyInstanceByFace			
Warning		The referenced component 'RevitAPI' could not be found.	PlaceFamilyInstanceByFace			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	PlaceFamilyInstanceByFace			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	PlaceFamilyInstanceByFace			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	PlaceFamilyInstanceByFace			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	PlacementOptions			
Warning		The referenced component 'RevitAddInUtility' could not be found.	PlacementOptions			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	PlacementOptions			
Warning		The referenced component 'RevitAPI' could not be found.	PlacementOptions			
Warning		The referenced component 'RevitAPIUI' could not be found.	PlacementOptions			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	PlacementOptions			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	PointCloudEngine			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	PointCloudEngine			
Warning		The referenced component 'RevitAPIUI' could not be found.	PointCloudEngine			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	PointCloudEngine			
Warning		The referenced component 'RevitAddInUtility' could not be found.	PointCloudEngine			
Warning		The referenced component 'RevitAPI' could not be found.	PointCloudEngine			
Warning		The referenced component 'RevitAddInUtility' could not be found.	PointCurveCreation			
Warning		The referenced component 'RevitAPI' could not be found.	PointCurveCreation			
Warning		Could not resolve this reference. Could not locate the assembly "Microsoft.Office.Interop.Excel". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	PointCurveCreation			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	PointCurveCreation			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	PointCurveCreation			
Warning		The referenced component 'Microsoft.Office.Interop.Excel' could not be found.	PointCurveCreation			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	PointCurveCreation			
Warning		The referenced component 'RevitAPIUI' could not be found.	PointCurveCreation			
Warning		The referenced component 'RevitAPI' could not be found.	PostCommandWorkflow			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	PostCommandWorkflow			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	PostCommandWorkflow			
Warning		The referenced component 'RevitAPIUI' could not be found.	PostCommandWorkflow			
Warning		The referenced component 'RevitAddInUtility' could not be found.	PostCommandWorkflow			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	PostCommandWorkflow			
Warning		The referenced component 'RevitAPI' could not be found.	PowerCircuit			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	PowerCircuit			
Warning		The referenced component 'RevitAddInUtility' could not be found.	PowerCircuit			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	PowerCircuit			
Warning		The referenced component 'RevitAPIUI' could not be found.	PowerCircuit			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	PowerCircuit			
Warning		The referenced component 'RevitAPIUI' could not be found.	PrintLog			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	PrintLog			
Warning		The referenced component 'RevitAPI' could not be found.	PrintLog			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	PrintLog			
Warning		The referenced component 'RevitAddInUtility' could not be found.	PrintLog			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	PrintLog			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	ProgressNotifier			
Warning		The referenced component 'RevitAddInUtility' could not be found.	ProgressNotifier			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	ProgressNotifier			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	ProgressNotifier			
Warning		The referenced component 'RevitAPI' could not be found.	ProgressNotifier			
Warning		The referenced component 'RevitAPIUI' could not be found.	ProgressNotifier			
Warning		The referenced component 'RevitAPIUI' could not be found.	ProjectInfo			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	ProjectInfo			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	ProjectInfo			
Warning		The referenced component 'RevitAPI' could not be found.	ProjectInfo			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	ProjectInfo			
Warning		The referenced component 'RevitAddInUtility' could not be found.	ProjectInfo			
Warning		The referenced component 'RevitAPIUI' could not be found.	ProximityDetection_WallJoinControl			
Warning		The referenced component 'RevitAPI' could not be found.	ProximityDetection_WallJoinControl			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	ProximityDetection_WallJoinControl			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	ProximityDetection_WallJoinControl			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	ProximityDetection_WallJoinControl			
Warning		The referenced component 'RevitAddInUtility' could not be found.	ProximityDetection_WallJoinControl			
Warning		Could not find rule set file "ProximityDetection_WallJoinControl.ruleset".	ProximityDetection_WallJoinControl			
Warning		The referenced component 'RevitAddInUtility' could not be found.	RayTraceBounce			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	RayTraceBounce			
Warning		The referenced component 'RevitAPI' could not be found.	RayTraceBounce			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	RayTraceBounce			
Warning		The referenced component 'RevitAPIUI' could not be found.	RayTraceBounce			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	RayTraceBounce			
Warning		The referenced component 'RevitAPIUI' could not be found.	ReadonlySharedParameters			
Warning		The referenced component 'RevitAPI' could not be found.	ReadonlySharedParameters			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	ReadonlySharedParameters			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	ReadonlySharedParameters			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	ReadonlySharedParameters			
Warning		The referenced component 'RevitAddInUtility' could not be found.	ReadonlySharedParameters			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	RebarContainerAnyShapeType			
Warning		The referenced component 'RevitAPIUI' could not be found.	RebarContainerAnyShapeType			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	RebarContainerAnyShapeType			
Warning		The referenced component 'RevitAPI' could not be found.	RebarContainerAnyShapeType			
Warning		The referenced component 'RevitAddInUtility' could not be found.	RebarContainerAnyShapeType			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	RebarContainerAnyShapeType			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	RebarFreeForm			
Warning		The referenced component 'RevitAPI' could not be found.	RebarFreeForm			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	RebarFreeForm			
Warning		The referenced component 'RevitAPIUI' could not be found.	RebarFreeForm			
Warning		The referenced component 'RevitAddInUtility' could not be found.	RebarFreeForm			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	RebarFreeForm			
Warning		The referenced component 'RevitAPIUI' could not be found.	ReferencePlane			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	ReferencePlane			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	ReferencePlane			
Warning		The referenced component 'RevitAPI' could not be found.	ReferencePlane			
Warning		The referenced component 'RevitAddInUtility' could not be found.	ReferencePlane			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	ReferencePlane			
Warning		The referenced component 'RevitAddInUtility' could not be found.	Reinforcement			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	Reinforcement			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	Reinforcement			
Warning		The referenced component 'RevitAPI' could not be found.	Reinforcement			
Warning		The referenced component 'RevitAPIUI' could not be found.	Reinforcement			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	Reinforcement			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	RevitAddInUtilitySample			
Warning		The referenced component 'RevitAddInUtility' could not be found.	RevitAddInUtilitySample			
Warning		The referenced component 'RevitAPI' could not be found.	RevitAddInUtilitySample			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	RevitAddInUtilitySample			
Warning		The referenced component 'RevitAPIUI' could not be found.	RevitAddInUtilitySample			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	RevitAddInUtilitySample			
Warning		The referenced component 'RevitAPIUI' could not be found.	RevitCommands			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	RevitCommands			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	RevitCommands			
Warning		The referenced component 'RevitAPI' could not be found.	RevitCommands			
Warning		The referenced component 'RevitAddInUtility' could not be found.	Ribbon			
Warning		The referenced component 'RevitAPIUI' could not be found.	Ribbon			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	Ribbon			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	Ribbon			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	Ribbon			
Warning		The referenced component 'RevitAPI' could not be found.	Ribbon			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	RoofsRooms			
Warning		The referenced component 'RevitAPI' could not be found.	RoofsRooms			
Warning		The referenced component 'RevitAddInUtility' could not be found.	RoofsRooms			
Warning		The referenced component 'RevitAPIUI' could not be found.	RoofsRooms			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	RoofsRooms			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	RoofsRooms			
Warning		The referenced component 'RevitAPIUI' could not be found.	RoomSchedule			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	RoomSchedule			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	RoomSchedule			
Warning		The referenced component 'RevitAPI' could not be found.	RoomSchedule			
Warning		The referenced component 'RevitAddInUtility' could not be found.	RoomSchedule			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	RoomSchedule			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	RoomViewer			
Warning		The referenced component 'RevitAPIUI' could not be found.	RoomViewer			
Warning		The referenced component 'RevitAPI' could not be found.	RoomViewer			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	RoomViewer			
Warning		The referenced component 'RevitAddInUtility' could not be found.	Rooms			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	Rooms			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	Rooms			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	Rooms			
Warning		The referenced component 'RevitAPI' could not be found.	Rooms			
Warning		The referenced component 'RevitAPIUI' could not be found.	Rooms			
Warning		The referenced component 'RevitAddInUtility' could not be found.	RotateFramingObjects (RotateFramingObjects\CS\RotateFramingObjects)			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	RotateFramingObjects (RotateFramingObjects\CS\RotateFramingObjects)			
Warning		The referenced component 'RevitAPI' could not be found.	RotateFramingObjects (RotateFramingObjects\CS\RotateFramingObjects)			
Warning		The referenced component 'RevitAPIUI' could not be found.	RotateFramingObjects (RotateFramingObjects\CS\RotateFramingObjects)			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	RotateFramingObjects (RotateFramingObjects\CS\RotateFramingObjects)			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	RotateFramingObjects (RotateFramingObjects\CS\RotateFramingObjects)			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	RotateFramingObjects (RotateFramingObjects\VB.NET\RotateFramingObjects)			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	RotateFramingObjects (RotateFramingObjects\VB.NET\RotateFramingObjects)			
Warning		The referenced component 'RevitAPI' could not be found.	RotateFramingObjects (RotateFramingObjects\VB.NET\RotateFramingObjects)			
Warning		The referenced component 'RevitAPIUI' could not be found.	RotateFramingObjects (RotateFramingObjects\VB.NET\RotateFramingObjects)			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	RoutingPreferenceTools			
Warning		The referenced component 'RevitAPI' could not be found.	RoutingPreferenceTools			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	RoutingPreferenceTools			
Warning		The referenced component 'RevitAPIUI' could not be found.	RoutingPreferenceTools			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	RoutingPreferenceTools			
Warning		The referenced component 'RevitAddInUtility' could not be found.	RoutingPreferenceTools			
Warning		The referenced component 'RevitAPI' could not be found.	RvtSamples			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	RvtSamples			
Warning		The referenced component 'RevitAddInUtility' could not be found.	RvtSamples			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	RvtSamples			
Warning		The referenced component 'RevitAPIUI' could not be found.	RvtSamples			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	RvtSamples			
Warning		"C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Csharp.targets" cannot be imported again. It was already imported at "Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\VSProps\SDKSamples.targets (29,3)". This is most likely a build authoring error. This subsequent import will be ignored. [Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\SampleCommandsSteelElements.csproj]	SampleCommandsSteelElements			
Warning		The referenced component 'RevitAPIUI' could not be found.	SampleCommandsSteelElements			
Warning		Could not resolve this reference. Could not locate the assembly "SteelConnectionsDB". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	SampleCommandsSteelElements			
Warning		Could not resolve this reference. Could not locate the assembly "ASGeometryMgd". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	SampleCommandsSteelElements			
Warning		The referenced component 'ASGeometryMgd' could not be found.	SampleCommandsSteelElements			
Warning		Could not resolve this reference. Could not locate the assembly "ASObjectsMgd". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	SampleCommandsSteelElements			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	SampleCommandsSteelElements			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	SampleCommandsSteelElements			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	SampleCommandsSteelElements			
Warning		The referenced component 'SteelConnectionsDB' could not be found.	SampleCommandsSteelElements			
Warning		Could not resolve this reference. Could not locate the assembly "ASCADLinkMgd". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	SampleCommandsSteelElements			
Warning		The referenced component 'ASObjectsMgd' could not be found.	SampleCommandsSteelElements			
Warning		The referenced component 'RevitAddInUtility' could not be found.	SampleCommandsSteelElements			
Warning		The referenced component 'ASCADLinkMgd' could not be found.	SampleCommandsSteelElements			
Warning		The referenced component 'RevitAPI' could not be found.	SampleCommandsSteelElements			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	ScheduleAutomaticFormatter			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	ScheduleAutomaticFormatter			
Warning		The referenced component 'RevitAPIUI' could not be found.	ScheduleAutomaticFormatter			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	ScheduleAutomaticFormatter			
Warning		The referenced component 'RevitAddInUtility' could not be found.	ScheduleAutomaticFormatter			
Warning		The referenced component 'RevitAPI' could not be found.	ScheduleAutomaticFormatter			
Warning		The referenced component 'RevitAddInUtility' could not be found.	ScheduleCreation			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	ScheduleCreation			
Warning		The referenced component 'RevitAPI' could not be found.	ScheduleCreation			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	ScheduleCreation			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	ScheduleCreation			
Warning		The referenced component 'RevitAPIUI' could not be found.	ScheduleCreation			
Warning		The referenced component 'RevitAddInUtility' could not be found.	ScheduleToHTML			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	ScheduleToHTML			
Warning		The referenced component 'RevitAPIUI' could not be found.	ScheduleToHTML			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	ScheduleToHTML			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	ScheduleToHTML			
Warning		The referenced component 'RevitAPI' could not be found.	ScheduleToHTML			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	Selections			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	Selections			
Warning		The referenced component 'RevitAPI' could not be found.	Selections			
Warning		The referenced component 'RevitAPIUI' could not be found.	Selections			
Warning		The referenced component 'RevitAddInUtility' could not be found.	Selections			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	Selections			
Warning		The referenced component 'RevitAddInUtility' could not be found.	ShaftHolePuncher			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	ShaftHolePuncher			
Warning		The referenced component 'RevitAPI' could not be found.	ShaftHolePuncher			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	ShaftHolePuncher			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	ShaftHolePuncher			
Warning		The referenced component 'RevitAPIUI' could not be found.	ShaftHolePuncher			
Warning		The referenced component 'RevitAddInUtility' could not be found.	SharedCoordinateSystem			
Warning		The referenced component 'RevitAPI' could not be found.	SharedCoordinateSystem			
Warning		The referenced component 'RevitAPIUI' could not be found.	SharedCoordinateSystem			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	SharedCoordinateSystem			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	SharedCoordinateSystem			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	SharedCoordinateSystem			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	SinePlotter			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	SinePlotter			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	SinePlotter			
Warning		The referenced component 'RevitAddInUtility' could not be found.	SinePlotter			
Warning		The referenced component 'RevitAPI' could not be found.	SinePlotter			
Warning		The referenced component 'RevitAPIUI' could not be found.	SinePlotter			
Warning		The referenced component 'RevitAPI' could not be found.	Site			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	Site			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	Site			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	Site			
Warning		The referenced component 'RevitAPIUI' could not be found.	Site			
Warning		The referenced component 'RevitAddInUtility' could not be found.	Site			
Warning		The referenced component 'RevitAPIUI' could not be found.	SlabProperties (SlabProperties\CS\SlabProperties)			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	SlabProperties (SlabProperties\CS\SlabProperties)			
Warning		The referenced component 'RevitAddInUtility' could not be found.	SlabProperties (SlabProperties\CS\SlabProperties)			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	SlabProperties (SlabProperties\CS\SlabProperties)			
Warning		The referenced component 'RevitAPI' could not be found.	SlabProperties (SlabProperties\CS\SlabProperties)			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	SlabProperties (SlabProperties\CS\SlabProperties)			
Warning		The referenced component 'RevitAPIUI' could not be found.	SlabProperties (SlabProperties\VB.NET\SlabProperties)			
Warning		The referenced component 'RevitAPI' could not be found.	SlabProperties (SlabProperties\VB.NET\SlabProperties)			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	SlabProperties (SlabProperties\VB.NET\SlabProperties)			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	SlabProperties (SlabProperties\VB.NET\SlabProperties)			
Warning		The referenced component 'RevitAPI' could not be found.	SlabShapeEditing			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	SlabShapeEditing			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	SlabShapeEditing			
Warning		The referenced component 'RevitAPIUI' could not be found.	SlabShapeEditing			
Warning		The referenced component 'RevitAddInUtility' could not be found.	SlabShapeEditing			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	SlabShapeEditing			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	SlaveSymbolGeometry			
Warning		The referenced component 'RevitAPI' could not be found.	SlaveSymbolGeometry			
Warning		The referenced component 'RevitAPIUI' could not be found.	SlaveSymbolGeometry			
Warning		The referenced component 'RevitAddInUtility' could not be found.	SlaveSymbolGeometry			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	SlaveSymbolGeometry			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	SlaveSymbolGeometry			
Warning		The referenced component 'RevitAPIUI' could not be found.	SolidSolidCut			
Warning		The referenced component 'RevitAddInUtility' could not be found.	SolidSolidCut			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	SolidSolidCut			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	SolidSolidCut			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	SolidSolidCut			
Warning		The referenced component 'RevitAPI' could not be found.	SolidSolidCut			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	SpanDirection			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	SpanDirection			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	SpanDirection			
Warning		The referenced component 'RevitAddInUtility' could not be found.	SpanDirection			
Warning		The referenced component 'RevitAPIUI' could not be found.	SpanDirection			
Warning		The referenced component 'RevitAPI' could not be found.	SpanDirection			
Warning		The referenced component 'RevitAddInUtility' could not be found.	SpatialFieldGradient			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	SpatialFieldGradient			
Warning		The referenced component 'RevitAPI' could not be found.	SpatialFieldGradient			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	SpatialFieldGradient			
Warning		The referenced component 'RevitAPIUI' could not be found.	SpatialFieldGradient			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	SpatialFieldGradient			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	SpotDimension			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	SpotDimension			
Warning		The referenced component 'RevitAddInUtility' could not be found.	SpotDimension			
Warning		The referenced component 'RevitAPIUI' could not be found.	SpotDimension			
Warning		The referenced component 'RevitAPI' could not be found.	SpotDimension			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	SpotDimension			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	StairsAutomation			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	StairsAutomation			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	StairsAutomation			
Warning		The referenced component 'RevitAPI' could not be found.	StairsAutomation			
Warning		The referenced component 'RevitAddInUtility' could not be found.	StairsAutomation			
Warning		The referenced component 'RevitAPIUI' could not be found.	StairsAutomation			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	StructSample			
Warning		The referenced component 'RevitAPI' could not be found.	StructSample			
Warning		The referenced component 'RevitAPIUI' could not be found.	StructSample			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	StructSample			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	StructSample			
Warning		The referenced component 'RevitAddInUtility' could not be found.	StructSample			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	StructuralLayerFunction (StructuralLayerFunction\CS\StructuralLayerFunction)			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	StructuralLayerFunction (StructuralLayerFunction\CS\StructuralLayerFunction)			
Warning		The referenced component 'RevitAPIUI' could not be found.	StructuralLayerFunction (StructuralLayerFunction\CS\StructuralLayerFunction)			
Warning		The referenced component 'RevitAddInUtility' could not be found.	StructuralLayerFunction (StructuralLayerFunction\CS\StructuralLayerFunction)			
Warning		The referenced component 'RevitAPI' could not be found.	StructuralLayerFunction (StructuralLayerFunction\CS\StructuralLayerFunction)			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	StructuralLayerFunction (StructuralLayerFunction\CS\StructuralLayerFunction)			
Warning		The referenced component 'RevitAPIUI' could not be found.	StructuralLayerFunction (StructuralLayerFunction\VB.NET\StructuralLayerFunction)			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	StructuralLayerFunction (StructuralLayerFunction\VB.NET\StructuralLayerFunction)			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	StructuralLayerFunction (StructuralLayerFunction\VB.NET\StructuralLayerFunction)			
Warning		The referenced component 'RevitAPI' could not be found.	StructuralLayerFunction (StructuralLayerFunction\VB.NET\StructuralLayerFunction)			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	TagBeam			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	TagBeam			
Warning		The referenced component 'RevitAPI' could not be found.	TagBeam			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	TagBeam			
Warning		The referenced component 'RevitAPIUI' could not be found.	TagBeam			
Warning		The referenced component 'RevitAddInUtility' could not be found.	TagBeam			
Warning		The referenced component 'RevitAPI' could not be found.	TestFloorThickness			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	TestFloorThickness			
Warning		The referenced component 'RevitAPIUI' could not be found.	TestFloorThickness			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	TestFloorThickness			
Warning		The referenced component 'RevitAPI' could not be found.	TestWallThickness			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	TestWallThickness			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	TestWallThickness			
Warning		The referenced component 'RevitAPIUI' could not be found.	TestWallThickness			
Warning		The referenced component 'RevitAPI' could not be found.	TransactionControl			
Warning		The referenced component 'RevitAPIUI' could not be found.	TransactionControl			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	TransactionControl			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	TransactionControl			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	TransactionControl			
Warning		The referenced component 'RevitAddInUtility' could not be found.	TransactionControl			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	TraverseSystem			
Warning		The referenced component 'RevitAPI' could not be found.	TraverseSystem			
Warning		The referenced component 'RevitAddInUtility' could not be found.	TraverseSystem			
Warning		The referenced component 'RevitAPIUI' could not be found.	TraverseSystem			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	TraverseSystem			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	TraverseSystem			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	Truss			
Warning		The referenced component 'RevitAddInUtility' could not be found.	Truss			
Warning		The referenced component 'RevitAPI' could not be found.	Truss			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	Truss			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	Truss			
Warning		The referenced component 'RevitAPIUI' could not be found.	Truss			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	TypeRegeneration			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	TypeRegeneration			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	TypeRegeneration			
Warning		The referenced component 'RevitAPIUI' could not be found.	TypeRegeneration			
Warning		The referenced component 'RevitAddInUtility' could not be found.	TypeRegeneration			
Warning		The referenced component 'RevitAPI' could not be found.	TypeRegeneration			
Warning		The referenced component 'RevitAPI' could not be found.	TypeSelector			
Warning		The referenced component 'RevitAPIUI' could not be found.	TypeSelector			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	TypeSelector			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	TypeSelector			
Warning		The referenced component 'RevitAPIUI' could not be found.	UIAPI			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	UIAPI			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	UIAPI			
Warning		The referenced component 'RevitAPI' could not be found.	UIAPI			
Warning		The referenced component 'RevitAddInUtility' could not be found.	UIAPI			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	UIAPI			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	Units			
Warning		The referenced component 'RevitAPI' could not be found.	Units			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	Units			
Warning		The referenced component 'RevitAddInUtility' could not be found.	Units			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	Units			
Warning		The referenced component 'RevitAPIUI' could not be found.	Units			
Warning		The referenced component 'RevitAPIUI' could not be found.	ValidateParameters			
Warning		The referenced component 'RevitAPI' could not be found.	ValidateParameters			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	ValidateParameters			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	ValidateParameters			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	ValidateParameters			
Warning		The referenced component 'RevitAddInUtility' could not be found.	ValidateParameters			
Warning		The referenced component 'RevitAddInUtility' could not be found.	VersionChecking			
Warning		The referenced component 'RevitAPIUI' could not be found.	VersionChecking			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	VersionChecking			
Warning		The referenced component 'RevitAPI' could not be found.	VersionChecking			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	VersionChecking			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	VersionChecking			
Warning		The referenced component 'RevitAPI' could not be found.	ViewFilters			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	ViewFilters			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	ViewFilters			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	ViewFilters			
Warning		The referenced component 'RevitAddInUtility' could not be found.	ViewFilters			
Warning		The referenced component 'RevitAPIUI' could not be found.	ViewFilters			
Warning		The referenced component 'RevitAPIUI' could not be found.	ViewPrinter			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	ViewPrinter			
Warning		The referenced component 'RevitAPI' could not be found.	ViewPrinter			
Warning		The referenced component 'RevitAddInUtility' could not be found.	ViewPrinter			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	ViewPrinter			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	ViewPrinter			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	ViewTemplateCreation			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	ViewTemplateCreation			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	ViewTemplateCreation			
Warning		The referenced component 'RevitAPI' could not be found.	ViewTemplateCreation			
Warning		The referenced component 'RevitAPIUI' could not be found.	ViewTemplateCreation			
Warning		The referenced component 'RevitAddInUtility' could not be found.	ViewTemplateCreation			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	VisibilityControl			
Warning		The referenced component 'RevitAPIUI' could not be found.	VisibilityControl			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	VisibilityControl			
Warning		The referenced component 'RevitAddInUtility' could not be found.	VisibilityControl			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	VisibilityControl			
Warning		The referenced component 'RevitAPI' could not be found.	VisibilityControl			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	WinderStairs			
Warning		The referenced component 'RevitAPIUI' could not be found.	WinderStairs			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	WinderStairs			
Warning		The referenced component 'RevitAPI' could not be found.	WinderStairs			
Warning		The referenced component 'RevitAddInUtility' could not be found.	WinderStairs			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	WinderStairs			
Warning		The referenced component 'RevitAPI' could not be found.	WindowWizard			
Warning		The referenced component 'RevitAPIUI' could not be found.	WindowWizard			
Warning		The referenced component 'RevitAddInUtility' could not be found.	WindowWizard			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	WindowWizard			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	WindowWizard			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	WindowWizard			
Warning		The referenced component 'RevitAPI' could not be found.	WorkThread			
Warning		The referenced component 'RevitAddInUtility' could not be found.	WorkThread			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	WorkThread			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	WorkThread			
Warning		The referenced component 'RevitAPIUI' could not be found.	WorkThread			
Warning		Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.	WorkThread			

Build output:

1>------ Rebuild All started: Project: RevitViewer, Configuration: Debug Any CPU ------
2>------ Rebuild All started: Project: SchemaWrapperTools, Configuration: Debug Any CPU ------
2>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
2>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
2>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
2>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageManager\SchemaWrapperTools\CS\FieldData.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
2>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageManager\SchemaWrapperTools\CS\FieldData.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
2>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageManager\SchemaWrapperTools\CS\FieldData.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
2>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageManager\SchemaWrapperTools\CS\SchemaDataWrapper.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
2>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageManager\SchemaWrapperTools\CS\SchemaDataWrapper.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
2>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageManager\SchemaWrapperTools\CS\SchemaDataWrapper.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
2>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageManager\SchemaWrapperTools\CS\SchemaWrapper.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
2>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageManager\SchemaWrapperTools\CS\SchemaWrapper.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
2>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageManager\SchemaWrapperTools\CS\SchemaWrapper.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
2>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageManager\SchemaWrapperTools\CS\FieldData.cs(119,14,119,25): error CS0246: The type or namespace name 'ForgeTypeId' could not be found (are you missing a using directive or an assembly reference?)
2>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageManager\SchemaWrapperTools\CS\FieldData.cs(56,52,56,63): error CS0246: The type or namespace name 'ForgeTypeId' could not be found (are you missing a using directive or an assembly reference?)
2>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageManager\SchemaWrapperTools\CS\FieldData.cs(68,52,68,63): error CS0246: The type or namespace name 'ForgeTypeId' could not be found (are you missing a using directive or an assembly reference?)
2>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageManager\SchemaWrapperTools\CS\FieldData.cs(139,15,139,26): error CS0246: The type or namespace name 'ForgeTypeId' could not be found (are you missing a using directive or an assembly reference?)
2>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageManager\SchemaWrapperTools\CS\SchemaDataWrapper.cs(81,61,81,72): error CS0246: The type or namespace name 'ForgeTypeId' could not be found (are you missing a using directive or an assembly reference?)
2>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageManager\SchemaWrapperTools\CS\SchemaDataWrapper.cs(112,14,112,25): error CS0246: The type or namespace name 'AccessLevel' could not be found (are you missing a using directive or an assembly reference?)
2>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageManager\SchemaWrapperTools\CS\SchemaDataWrapper.cs(121,14,121,25): error CS0246: The type or namespace name 'AccessLevel' could not be found (are you missing a using directive or an assembly reference?)
2>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageManager\SchemaWrapperTools\CS\SchemaWrapper.cs(57,46,57,52): error CS0246: The type or namespace name 'Schema' could not be found (are you missing a using directive or an assembly reference?)
2>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageManager\SchemaWrapperTools\CS\SchemaWrapper.cs(103,60,103,71): error CS0246: The type or namespace name 'AccessLevel' could not be found (are you missing a using directive or an assembly reference?)
2>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageManager\SchemaWrapperTools\CS\SchemaWrapper.cs(103,84,103,95): error CS0246: The type or namespace name 'AccessLevel' could not be found (are you missing a using directive or an assembly reference?)
2>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageManager\SchemaWrapperTools\CS\SchemaDataWrapper.cs(60,47,60,58): error CS0246: The type or namespace name 'AccessLevel' could not be found (are you missing a using directive or an assembly reference?)
2>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageManager\SchemaWrapperTools\CS\SchemaDataWrapper.cs(60,72,60,83): error CS0246: The type or namespace name 'AccessLevel' could not be found (are you missing a using directive or an assembly reference?)
2>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageManager\SchemaWrapperTools\CS\SchemaWrapper.cs(166,52,166,63): error CS0246: The type or namespace name 'ForgeTypeId' could not be found (are you missing a using directive or an assembly reference?)
2>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageManager\SchemaWrapperTools\CS\SchemaDataWrapper.cs(177,15,177,26): error CS0246: The type or namespace name 'AccessLevel' could not be found (are you missing a using directive or an assembly reference?)
2>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageManager\SchemaWrapperTools\CS\SchemaWrapper.cs(309,41,309,47): error CS0246: The type or namespace name 'Entity' could not be found (are you missing a using directive or an assembly reference?)
2>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageManager\SchemaWrapperTools\CS\SchemaDataWrapper.cs(178,15,178,26): error CS0246: The type or namespace name 'AccessLevel' could not be found (are you missing a using directive or an assembly reference?)
2>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageManager\SchemaWrapperTools\CS\SchemaWrapper.cs(323,83,323,89): error CS0246: The type or namespace name 'Schema' could not be found (are you missing a using directive or an assembly reference?)
2>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageManager\SchemaWrapperTools\CS\SchemaWrapper.cs(372,61,372,66): error CS0246: The type or namespace name 'Field' could not be found (are you missing a using directive or an assembly reference?)
2>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageManager\SchemaWrapperTools\CS\SchemaWrapper.cs(372,74,372,80): error CS0246: The type or namespace name 'Entity' could not be found (are you missing a using directive or an assembly reference?)
2>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageManager\SchemaWrapperTools\CS\SchemaWrapper.cs(479,14,479,20): error CS0246: The type or namespace name 'Schema' could not be found (are you missing a using directive or an assembly reference?)
2>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageManager\SchemaWrapperTools\CS\SchemaWrapper.cs(485,29,485,35): error CS0246: The type or namespace name 'Schema' could not be found (are you missing a using directive or an assembly reference?)
2>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageManager\SchemaWrapperTools\CS\SchemaWrapper.cs(144,44,144,55): error CS0246: The type or namespace name 'AccessLevel' could not be found (are you missing a using directive or an assembly reference?)
2>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageManager\SchemaWrapperTools\CS\SchemaWrapper.cs(144,68,144,79): error CS0246: The type or namespace name 'AccessLevel' could not be found (are you missing a using directive or an assembly reference?)
2>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageManager\SchemaWrapperTools\CS\SchemaWrapper.cs(150,29,150,35): error CS0246: The type or namespace name 'Schema' could not be found (are you missing a using directive or an assembly reference?)
2>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageManager\SchemaWrapperTools\CS\SchemaWrapper.cs(519,15,519,21): error CS0246: The type or namespace name 'Schema' could not be found (are you missing a using directive or an assembly reference?)
2>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageManager\SchemaWrapperTools\CS\SchemaWrapper.cs(522,15,522,28): error CS0246: The type or namespace name 'SchemaBuilder' could not be found (are you missing a using directive or an assembly reference?)
3>------ Rebuild All started: Project: ExternalResourceDBServer, Configuration: Debug Any CPU ------
1>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
1>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
1>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Viewers\RevitViewer\VB.NET\Main.vb(28,9): error BC40056: Namespace or type specified in the Imports 'Autodesk.Revit' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.
1>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Viewers\RevitViewer\VB.NET\Main.vb(29,9): error BC40056: Namespace or type specified in the Imports 'Autodesk.Revit.DB' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.
1>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Viewers\RevitViewer\VB.NET\Main.vb(30,9): error BC40056: Namespace or type specified in the Imports 'Autodesk.Revit.UI' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.
1>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Viewers\RevitViewer\VB.NET\Main.vb(58,49): error BC30002: Type 'ExternalCommandData' is not defined.
1>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Viewers\RevitViewer\VB.NET\Main.vb(58,113): error BC30002: Type 'Autodesk.Revit.DB.ElementSet' is not defined.
1>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Viewers\RevitViewer\VB.NET\Main.vb(58,146): error BC30002: Type 'Autodesk.Revit.UI.Result' is not defined.
1>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Viewers\RevitViewer\VB.NET\Main.vb(58,182): error BC30002: Type 'IExternalCommand' is not defined.
1>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Viewers\RevitViewer\VB.NET\Main.vb(40,15): error BC30002: Type 'IExternalCommand' is not defined.
1>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Viewers\RevitViewer\VB.NET\Main.vb(36,2): error BC30002: Type 'Autodesk.Revit.Attributes.Transaction' is not defined.
1>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Viewers\RevitViewer\VB.NET\Main.vb(37,2): error BC30002: Type 'Autodesk.Revit.Attributes.Regeneration' is not defined.
1>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Viewers\RevitViewer\VB.NET\Main.vb(38,2): error BC30002: Type 'Autodesk.Revit.Attributes.Journaling' is not defined.
1>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Viewers\RevitViewer\VB.NET\Main.vb(36,40): error BC30451: 'Autodesk' is not declared. It may be inaccessible due to its protection level.
1>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Viewers\RevitViewer\VB.NET\Main.vb(37,41): error BC30451: 'Autodesk' is not declared. It may be inaccessible due to its protection level.
1>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Viewers\RevitViewer\VB.NET\Main.vb(38,39): error BC30451: 'Autodesk' is not declared. It may be inaccessible due to its protection level.
4>------ Rebuild All started: Project: AreaReinCurve, Configuration: Debug Any CPU ------
3>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
3>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
3>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
3>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceDBServer\CS\Application.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
3>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceDBServer\CS\Application.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
3>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceDBServer\CS\Application.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
3>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceDBServer\CS\Application.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
3>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceDBServer\CS\Application.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
3>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceDBServer\CS\KeynotesDatabase.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
3>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceDBServer\CS\KeynotesDatabase.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
3>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceDBServer\CS\SampleExternalResourceDBServer.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
3>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceDBServer\CS\SampleExternalResourceDBServer.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
3>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceDBServer\CS\SampleExternalResourceDBServer.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
3>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceDBServer\CS\ServerInterfaceExtensionsForRevitLinks.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
3>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceDBServer\CS\ServerInterfaceExtensionsForRevitLinks.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
3>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceDBServer\CS\Application.cs(45,33,45,55): error CS0246: The type or namespace name 'IExternalDBApplication' could not be found (are you missing a using directive or an assembly reference?)
3>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceDBServer\CS\Application.cs(57,52,57,73): error CS0246: The type or namespace name 'ControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
3>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceDBServer\CS\Application.cs(57,14,57,41): error CS0246: The type or namespace name 'ExternalDBApplicationResult' could not be found (are you missing a using directive or an assembly reference?)
3>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceDBServer\CS\Application.cs(81,53,81,74): error CS0246: The type or namespace name 'ControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
3>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceDBServer\CS\Application.cs(81,14,81,41): error CS0246: The type or namespace name 'ExternalDBApplicationResult' could not be found (are you missing a using directive or an assembly reference?)
3>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceDBServer\CS\KeynotesDatabase.cs(72,61,72,91): error CS0246: The type or namespace name 'KeyBasedTreeEntriesLoadContent' could not be found (are you missing a using directive or an assembly reference?)
3>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceDBServer\CS\SampleExternalResourceDBServer.cs(56,50,56,73): error CS0246: The type or namespace name 'IExternalResourceServer' could not be found (are you missing a using directive or an assembly reference?)
3>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceDBServer\CS\SampleExternalResourceDBServer.cs(73,14,73,31): error CS0246: The type or namespace name 'ExternalServiceId' could not be found (are you missing a using directive or an assembly reference?)
3>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceDBServer\CS\SampleExternalResourceDBServer.cs(146,48,146,68): error CS0246: The type or namespace name 'ExternalResourceType' could not be found (are you missing a using directive or an assembly reference?)
3>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceDBServer\CS\SampleExternalResourceDBServer.cs(166,36,166,63): error CS0246: The type or namespace name 'ExternalResourceBrowserData' could not be found (are you missing a using directive or an assembly reference?)
3>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceDBServer\CS\SampleExternalResourceDBServer.cs(196,40,196,65): error CS0246: The type or namespace name 'ExternalResourceReference' could not be found (are you missing a using directive or an assembly reference?)
3>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceDBServer\CS\SampleExternalResourceDBServer.cs(252,38,252,63): error CS0246: The type or namespace name 'ExternalResourceReference' could not be found (are you missing a using directive or an assembly reference?)
3>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceDBServer\CS\SampleExternalResourceDBServer.cs(268,52,268,72): error CS0246: The type or namespace name 'ExternalResourceType' could not be found (are you missing a using directive or an assembly reference?)
3>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceDBServer\CS\SampleExternalResourceDBServer.cs(268,87,268,112): error CS0246: The type or namespace name 'ExternalResourceReference' could not be found (are you missing a using directive or an assembly reference?)
3>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceDBServer\CS\SampleExternalResourceDBServer.cs(268,132,268,159): error CS0246: The type or namespace name 'ExternalResourceLoadContext' could not be found (are you missing a using directive or an assembly reference?)
3>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceDBServer\CS\SampleExternalResourceDBServer.cs(268,173,268,200): error CS0246: The type or namespace name 'ExternalResourceLoadContent' could not be found (are you missing a using directive or an assembly reference?)
3>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceDBServer\CS\SampleExternalResourceDBServer.cs(310,61,310,86): error CS0246: The type or namespace name 'ExternalResourceReference' could not be found (are you missing a using directive or an assembly reference?)
3>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceDBServer\CS\SampleExternalResourceDBServer.cs(310,14,310,35): error CS0246: The type or namespace name 'ResourceVersionStatus' could not be found (are you missing a using directive or an assembly reference?)
3>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceDBServer\CS\SampleExternalResourceDBServer.cs(330,59,330,91): error CS0246: The type or namespace name 'ExternalResourceServerExtensions' could not be found (are you missing a using directive or an assembly reference?)
3>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceDBServer\CS\SampleExternalResourceDBServer.cs(395,59,395,84): error CS0246: The type or namespace name 'ExternalResourceReference' could not be found (are you missing a using directive or an assembly reference?)
3>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceDBServer\CS\SampleExternalResourceDBServer.cs(418,52,418,79): error CS0246: The type or namespace name 'ExternalResourceBrowserData' could not be found (are you missing a using directive or an assembly reference?)
3>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceDBServer\CS\SampleExternalResourceDBServer.cs(490,51,490,76): error CS0246: The type or namespace name 'ExternalResourceReference' could not be found (are you missing a using directive or an assembly reference?)
3>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceDBServer\CS\SampleExternalResourceDBServer.cs(511,46,511,73): error CS0246: The type or namespace name 'ExternalResourceBrowserData' could not be found (are you missing a using directive or an assembly reference?)
3>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceDBServer\CS\SampleExternalResourceDBServer.cs(560,44,560,69): error CS0246: The type or namespace name 'ExternalResourceReference' could not be found (are you missing a using directive or an assembly reference?)
3>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceDBServer\CS\SampleExternalResourceDBServer.cs(560,89,560,116): error CS0246: The type or namespace name 'ExternalResourceLoadContent' could not be found (are you missing a using directive or an assembly reference?)
3>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceDBServer\CS\SampleExternalResourceDBServer.cs(605,34,605,59): error CS0246: The type or namespace name 'ExternalResourceReference' could not be found (are you missing a using directive or an assembly reference?)
3>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceDBServer\CS\SampleExternalResourceDBServer.cs(605,79,605,106): error CS0246: The type or namespace name 'ExternalResourceLoadContent' could not be found (are you missing a using directive or an assembly reference?)
3>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceDBServer\CS\SampleExternalResourceDBServer.cs(639,54,639,79): error CS0246: The type or namespace name 'ExternalResourceReference' could not be found (are you missing a using directive or an assembly reference?)
3>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceDBServer\CS\SampleExternalResourceDBServer.cs(683,54,683,79): error CS0246: The type or namespace name 'ExternalResourceReference' could not be found (are you missing a using directive or an assembly reference?)
3>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceDBServer\CS\ServerInterfaceExtensionsForRevitLinks.cs(39,38,39,66): error CS0246: The type or namespace name 'IGetLocalPathForOpenCallback' could not be found (are you missing a using directive or an assembly reference?)
3>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceDBServer\CS\ServerInterfaceExtensionsForRevitLinks.cs(45,41,45,66): error CS0246: The type or namespace name 'ExternalResourceReference' could not be found (are you missing a using directive or an assembly reference?)
3>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceDBServer\CS\ServerInterfaceExtensionsForRevitLinks.cs(58,51,58,93): error CS0246: The type or namespace name 'IOnLocalLinkSharedCoordinatesSavedCallback' could not be found (are you missing a using directive or an assembly reference?)
3>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceDBServer\CS\ServerInterfaceExtensionsForRevitLinks.cs(65,53,65,78): error CS0246: The type or namespace name 'ExternalResourceReference' could not be found (are you missing a using directive or an assembly reference?)
5>------ Rebuild All started: Project: AreaReinParameters, Configuration: Debug Any CPU ------
4>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
4>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
4>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
4>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinCurve\CS\AreaReinCurve.cs(29,11,29,19): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
4>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinCurve\CS\AreaReinCurve.cs(30,11,30,19): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
4>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinCurve\CS\AreaReinCurve.cs(31,11,31,19): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
4>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinCurve\CS\AreaReinCurve.cs(32,11,32,19): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
4>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinCurve\CS\GeomUtil.cs(34,21,34,29): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
4>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinCurve\CS\GeomUtil.cs(33,24,33,32): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
4>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinCurve\CS\GeomUtil.cs(29,11,29,19): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
4>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinCurve\CS\GeomUtil.cs(30,11,30,19): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
4>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinCurve\CS\GeomUtil.cs(31,11,31,19): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
4>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinCurve\CS\ParameterUtil.cs(29,11,29,19): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
4>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinCurve\CS\ParameterUtil.cs(30,11,30,19): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
4>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinCurve\CS\AreaReinCurve.cs(37,28,37,44): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
4>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinCurve\CS\AreaReinCurve.cs(34,6,34,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
4>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinCurve\CS\AreaReinCurve.cs(35,6,35,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
4>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinCurve\CS\AreaReinCurve.cs(36,6,36,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
4>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinCurve\CS\AreaReinCurve.cs(34,44,34,52): error CS0103: The name 'Autodesk' does not exist in the current context
4>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinCurve\CS\AreaReinCurve.cs(35,45,35,53): error CS0103: The name 'Autodesk' does not exist in the current context
4>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinCurve\CS\AreaReinCurve.cs(36,43,36,51): error CS0103: The name 'Autodesk' does not exist in the current context
4>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinCurve\CS\GeomUtil.cs(53,42,53,52): error CS0246: The type or namespace name 'CurveArray' could not be found (are you missing a using directive or an assembly reference?)
4>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinCurve\CS\GeomUtil.cs(100,39,100,43): error CS0246: The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)
4>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinCurve\CS\GeomUtil.cs(100,51,100,55): error CS0246: The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)
4>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinCurve\CS\AreaReinCurve.cs(59,49,59,68): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
4>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinCurve\CS\AreaReinCurve.cs(60,33,60,41): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
4>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinCurve\CS\AreaReinCurve.cs(59,16,59,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
4>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinCurve\CS\GeomUtil.cs(120,55,120,63): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
4>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinCurve\CS\GeomUtil.cs(120,82,120,90): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
4>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinCurve\CS\GeomUtil.cs(120,24,120,32): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
4>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinCurve\CS\AreaReinCurve.cs(126,30,126,40): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
4>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinCurve\CS\GeomUtil.cs(136,41,136,49): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
4>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinCurve\CS\GeomUtil.cs(136,68,136,76): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
4>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinCurve\CS\AreaReinCurve.cs(39,9,39,26): error CS0246: The type or namespace name 'AreaReinforcement' could not be found (are you missing a using directive or an assembly reference?)
4>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinCurve\CS\AreaReinCurve.cs(40,14,40,36): error CS0246: The type or namespace name 'AreaReinforcementCurve' could not be found (are you missing a using directive or an assembly reference?)
4>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinCurve\CS\AreaReinCurve.cs(41,9,41,17): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
4>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinCurve\CS\ParameterUtil.cs(43,39,43,46): error CS0246: The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)
4>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinCurve\CS\ParameterUtil.cs(90,39,90,46): error CS0246: The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)
4>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinCurve\CS\ParameterUtil.cs(90,53,90,69): error CS0246: The type or namespace name 'BuiltInParameter' could not be found (are you missing a using directive or an assembly reference?)
4>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinCurve\CS\ParameterUtil.cs(68,48,68,60): error CS0246: The type or namespace name 'ParameterSet' could not be found (are you missing a using directive or an assembly reference?)
4>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinCurve\CS\ParameterUtil.cs(68,23,68,32): error CS0246: The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)
4>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinCurve\CS\ParameterUtil.cs(114,42,114,51): error CS0246: The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)
6>------ Rebuild All started: Project: CompoundStructure, Configuration: Debug Any CPU ------
6>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
6>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
6>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
6>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CompoundStructure\CS\Command.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
6>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CompoundStructure\CS\Command.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
6>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CompoundStructure\CS\Command.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
6>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CompoundStructure\CS\Command.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
6>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CompoundStructure\CS\Command.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
6>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CompoundStructure\CS\Command.cs(42,42,42,50): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
6>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CompoundStructure\CS\Command.cs(40,6,40,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
6>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CompoundStructure\CS\Command.cs(41,6,41,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
6>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CompoundStructure\CS\Command.cs(40,44,40,52): error CS0103: The name 'Autodesk' does not exist in the current context
6>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CompoundStructure\CS\Command.cs(41,43,41,51): error CS0103: The name 'Autodesk' does not exist in the current context
6>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CompoundStructure\CS\Command.cs(69,31,69,39): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
6>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CompoundStructure\CS\Command.cs(69,102,69,112): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
6>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CompoundStructure\CS\Command.cs(69,16,69,22): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
6>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CompoundStructure\CS\Command.cs(122,37,122,41): error CS0246: The type or namespace name 'Wall' could not be found (are you missing a using directive or an assembly reference?)
6>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CompoundStructure\CS\Command.cs(220,43,220,56): error CS0246: The type or namespace name 'WallSweepInfo' could not be found (are you missing a using directive or an assembly reference?)
6>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CompoundStructure\CS\Command.cs(234,17,234,25): error CS0246: The type or namespace name 'Material' could not be found (are you missing a using directive or an assembly reference?)
6>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CompoundStructure\CS\Command.cs(252,17,252,25): error CS0246: The type or namespace name 'Material' could not be found (are you missing a using directive or an assembly reference?)
6>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CompoundStructure\CS\Command.cs(310,17,310,25): error CS0246: The type or namespace name 'Material' could not be found (are you missing a using directive or an assembly reference?)
6>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CompoundStructure\CS\Command.cs(353,17,353,29): error CS0246: The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)
6>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CompoundStructure\CS\Command.cs(47,9,47,22): error CS0246: The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)
6>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CompoundStructure\CS\Command.cs(51,9,51,19): error CS0246: The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)
7>------ Rebuild All started: Project: CreateWallinBeamProfile, Configuration: Debug Any CPU ------
5>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
5>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
5>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
5>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\AreaReinData.cs(30,11,30,19): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
5>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\AreaReinData.cs(31,11,31,19): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
5>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\AreaReinParameters.cs(32,11,32,19): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
5>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\AreaReinParameters.cs(33,11,33,19): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
5>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\AreaReinParameters.cs(34,11,34,19): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
5>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\AreaReinParameters.cs(35,11,35,19): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
5>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\HookTypeConverter.cs(31,11,31,19): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
5>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\HookTypeConverter.cs(32,11,32,19): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
5>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\FloorAreaReinData.cs(32,11,32,19): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
5>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\FloorAreaReinData.cs(33,11,33,19): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
5>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\FloorAreaReinData.cs(34,11,34,19): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
5>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\ParameterUtil.cs(31,11,31,19): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
5>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\ParameterUtil.cs(32,11,32,19): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
5>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\WallAreaReinData.cs(32,11,32,19): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
5>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\WallAreaReinData.cs(33,11,33,19): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
5>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\WallAreaReinData.cs(34,11,34,19): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
5>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\AreaReinData.cs(43,25,43,42): error CS0246: The type or namespace name 'AreaReinforcement' could not be found (are you missing a using directive or an assembly reference?)
5>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\AreaReinParameters.cs(43,21,43,37): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
5>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\AreaReinParameters.cs(40,6,40,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
5>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\AreaReinParameters.cs(41,6,41,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
5>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\AreaReinParameters.cs(42,6,42,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
5>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\AreaReinParameters.cs(40,44,40,52): error CS0103: The name 'Autodesk' does not exist in the current context
5>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\AreaReinParameters.cs(41,45,41,53): error CS0103: The name 'Autodesk' does not exist in the current context
5>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\AreaReinParameters.cs(42,43,42,51): error CS0103: The name 'Autodesk' does not exist in the current context
5>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\AreaReinParameters.cs(67,11,67,30): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
5>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\AreaReinParameters.cs(69,11,69,21): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
5>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\AreaReinParameters.cs(66,16,66,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
5>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\AreaReinParameters.cs(107,23,107,42): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
5>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\AreaReinParameters.cs(45,16,45,35): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
5>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\AreaReinParameters.cs(48,9,48,26): error CS0246: The type or namespace name 'AreaReinforcement' could not be found (are you missing a using directive or an assembly reference?)
5>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\AreaReinParameters.cs(207,24,207,40): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
5>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\AreaReinParameters.cs(205,6,205,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
5>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\AreaReinParameters.cs(206,6,206,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
5>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\AreaReinParameters.cs(205,44,205,52): error CS0103: The name 'Autodesk' does not exist in the current context
5>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\AreaReinParameters.cs(206,45,206,53): error CS0103: The name 'Autodesk' does not exist in the current context
5>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\AreaReinParameters.cs(210,11,210,30): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
5>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\AreaReinParameters.cs(212,11,212,21): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
5>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\AreaReinParameters.cs(209,16,209,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
5>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\FloorAreaReinData.cs(69,32,69,49): error CS0246: The type or namespace name 'AreaReinforcement' could not be found (are you missing a using directive or an assembly reference?)
5>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\FloorAreaReinData.cs(141,16,141,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
5>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\FloorAreaReinData.cs(154,16,154,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
5>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\FloorAreaReinData.cs(184,16,184,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
5>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\FloorAreaReinData.cs(197,16,197,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
5>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\FloorAreaReinData.cs(227,16,227,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
5>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\FloorAreaReinData.cs(240,16,240,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
5>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\FloorAreaReinData.cs(270,16,270,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
5>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\FloorAreaReinData.cs(283,16,283,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
5>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\FloorAreaReinData.cs(43,9,43,18): error CS0246: The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)
5>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\FloorAreaReinData.cs(45,9,45,18): error CS0246: The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)
5>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\FloorAreaReinData.cs(46,9,46,18): error CS0246: The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)
5>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\FloorAreaReinData.cs(47,9,47,18): error CS0246: The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)
5>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\FloorAreaReinData.cs(50,9,50,18): error CS0246: The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)
5>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\FloorAreaReinData.cs(51,9,51,18): error CS0246: The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)
5>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\FloorAreaReinData.cs(52,9,52,18): error CS0246: The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)
5>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\FloorAreaReinData.cs(55,9,55,18): error CS0246: The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)
5>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\FloorAreaReinData.cs(56,9,56,18): error CS0246: The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)
5>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\FloorAreaReinData.cs(57,9,57,18): error CS0246: The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)
5>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\FloorAreaReinData.cs(60,9,60,18): error CS0246: The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)
5>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\FloorAreaReinData.cs(61,9,61,18): error CS0246: The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)
5>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\FloorAreaReinData.cs(62,9,62,18): error CS0246: The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)
5>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\ParameterUtil.cs(49,39,49,46): error CS0246: The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)
5>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\ParameterUtil.cs(96,39,96,46): error CS0246: The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)
5>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\ParameterUtil.cs(96,53,96,69): error CS0246: The type or namespace name 'BuiltInParameter' could not be found (are you missing a using directive or an assembly reference?)
5>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\ParameterUtil.cs(74,48,74,60): error CS0246: The type or namespace name 'ParameterSet' could not be found (are you missing a using directive or an assembly reference?)
5>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\ParameterUtil.cs(74,23,74,32): error CS0246: The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)
5>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\ParameterUtil.cs(120,42,120,51): error CS0246: The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)
5>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\WallAreaReinData.cs(64,32,64,49): error CS0246: The type or namespace name 'AreaReinforcement' could not be found (are you missing a using directive or an assembly reference?)
5>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\WallAreaReinData.cs(135,16,135,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
5>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\WallAreaReinData.cs(148,16,148,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
5>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\WallAreaReinData.cs(178,16,178,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
5>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\WallAreaReinData.cs(191,16,191,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
5>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\WallAreaReinData.cs(221,16,221,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
5>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\WallAreaReinData.cs(234,16,234,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
5>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\WallAreaReinData.cs(264,16,264,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
5>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\WallAreaReinData.cs(277,16,277,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
5>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\WallAreaReinData.cs(43,9,43,18): error CS0246: The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)
5>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\WallAreaReinData.cs(45,9,45,18): error CS0246: The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)
5>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\WallAreaReinData.cs(46,9,46,18): error CS0246: The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)
5>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\WallAreaReinData.cs(47,9,47,18): error CS0246: The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)
5>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\WallAreaReinData.cs(50,9,50,18): error CS0246: The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)
5>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\WallAreaReinData.cs(51,9,51,18): error CS0246: The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)
5>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\WallAreaReinData.cs(52,9,52,18): error CS0246: The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)
5>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\WallAreaReinData.cs(55,9,55,18): error CS0246: The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)
5>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\WallAreaReinData.cs(56,9,56,18): error CS0246: The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)
5>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\WallAreaReinData.cs(57,9,57,18): error CS0246: The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)
5>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\WallAreaReinData.cs(60,9,60,18): error CS0246: The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)
5>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\WallAreaReinData.cs(61,9,61,18): error CS0246: The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)
5>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AreaReinParameters\CS\WallAreaReinData.cs(62,9,62,18): error CS0246: The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)
8>------ Rebuild All started: Project: DeckProperties, Configuration: Debug Any CPU ------
8>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
8>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
8>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
8>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeckProperties\CS\Command.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
8>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeckProperties\CS\Command.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
8>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeckProperties\CS\Command.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
8>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeckProperties\CS\Command.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
8>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeckProperties\CS\Command.cs(41,28,41,44): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
8>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeckProperties\CS\Command.cs(38,6,38,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
8>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeckProperties\CS\Command.cs(39,6,39,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
8>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeckProperties\CS\Command.cs(40,6,40,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
8>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeckProperties\CS\Command.cs(38,44,38,52): error CS0103: The name 'Autodesk' does not exist in the current context
8>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeckProperties\CS\Command.cs(39,45,39,53): error CS0103: The name 'Autodesk' does not exist in the current context
8>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeckProperties\CS\Command.cs(40,43,40,51): error CS0103: The name 'Autodesk' does not exist in the current context
8>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeckProperties\CS\Command.cs(62,49,62,57): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
8>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeckProperties\CS\Command.cs(64,48,64,58): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
8>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeckProperties\CS\Command.cs(62,16,62,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
8>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeckProperties\CS\Command.cs(122,31,122,36): error CS0246: The type or namespace name 'Floor' could not be found (are you missing a using directive or an assembly reference?)
8>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeckProperties\CS\Command.cs(150,31,150,53): error CS0246: The type or namespace name 'CompoundStructureLayer' could not be found (are you missing a using directive or an assembly reference?)
8>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeckProperties\CS\Command.cs(183,37,183,44): error CS0246: The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)
8>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeckProperties\CS\Command.cs(213,32,213,54): error CS0246: The type or namespace name 'CompoundStructureLayer' could not be found (are you missing a using directive or an assembly reference?)
8>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeckProperties\CS\Command.cs(44,17,44,25): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
9>------ Rebuild All started: Project: DeleteObject (DeleteObject\CS\DeleteObject), Configuration: Debug Any CPU ------
7>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
7>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
7>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
7>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateWallinBeamProfile\CS\CreateWallinBeamProfile.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
7>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateWallinBeamProfile\CS\CreateWallinBeamProfile.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
7>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateWallinBeamProfile\CS\CreateWallinBeamProfile.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
7>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateWallinBeamProfile\CS\CreateWallinBeamProfile.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
7>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateWallinBeamProfile\CS\CreateWallinBeamProfile.cs(34,7,34,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
7>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateWallinBeamProfile\CS\CreateWallinBeamProfile.cs(44,44,44,60): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
7>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateWallinBeamProfile\CS\CreateWallinBeamProfile.cs(41,6,41,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
7>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateWallinBeamProfile\CS\CreateWallinBeamProfile.cs(42,6,42,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
7>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateWallinBeamProfile\CS\CreateWallinBeamProfile.cs(43,6,43,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
7>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateWallinBeamProfile\CS\CreateWallinBeamProfile.cs(41,44,41,52): error CS0103: The name 'Autodesk' does not exist in the current context
7>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateWallinBeamProfile\CS\CreateWallinBeamProfile.cs(42,45,42,53): error CS0103: The name 'Autodesk' does not exist in the current context
7>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateWallinBeamProfile\CS\CreateWallinBeamProfile.cs(43,43,43,51): error CS0103: The name 'Autodesk' does not exist in the current context
7>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateWallinBeamProfile\CS\CreateWallinBeamProfile.cs(61,22,61,30): error CS0246: The type or namespace name 'WallType' could not be found (are you missing a using directive or an assembly reference?)
7>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateWallinBeamProfile\CS\CreateWallinBeamProfile.cs(123,49,123,68): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
7>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateWallinBeamProfile\CS\CreateWallinBeamProfile.cs(124,73,124,81): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
7>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateWallinBeamProfile\CS\CreateWallinBeamProfile.cs(123,16,123,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
7>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateWallinBeamProfile\CS\CreateWallinBeamProfile.cs(169,29,169,37): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
7>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateWallinBeamProfile\CS\CreateWallinBeamProfile.cs(262,29,262,37): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
7>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateWallinBeamProfile\CS\CreateWallinBeamProfile.cs(336,28,336,36): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
7>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateWallinBeamProfile\CS\CreateWallinBeamProfile.cs(336,57,336,65): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
7>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateWallinBeamProfile\CS\CreateWallinBeamProfile.cs(47,15,47,23): error CS0246: The type or namespace name 'WallType' could not be found (are you missing a using directive or an assembly reference?)
7>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateWallinBeamProfile\CS\CreateWallinBeamProfile.cs(50,9,50,17): error CS0246: The type or namespace name 'WallType' could not be found (are you missing a using directive or an assembly reference?)
7>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateWallinBeamProfile\CS\CreateWallinBeamProfile.cs(51,9,51,14): error CS0246: The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)
10>------ Rebuild All started: Project: DeleteObject (DeleteObject\VB.NET\DeleteObject), Configuration: Debug Any CPU ------
9>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
9>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
9>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
9>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeleteObject\CS\DeleteObject.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
9>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeleteObject\CS\DeleteObject.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
9>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeleteObject\CS\DeleteObject.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
9>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeleteObject\CS\DeleteObject.cs(38,28,38,36): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
9>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeleteObject\CS\DeleteObject.cs(35,6,35,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
9>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeleteObject\CS\DeleteObject.cs(36,6,36,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
9>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeleteObject\CS\DeleteObject.cs(37,6,37,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
9>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeleteObject\CS\DeleteObject.cs(35,44,35,52): error CS0103: The name 'Autodesk' does not exist in the current context
9>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeleteObject\CS\DeleteObject.cs(36,45,36,53): error CS0103: The name 'Autodesk' does not exist in the current context
9>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeleteObject\CS\DeleteObject.cs(37,43,37,51): error CS0103: The name 'Autodesk' does not exist in the current context
9>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeleteObject\CS\DeleteObject.cs(57,13,57,21): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
9>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeleteObject\CS\DeleteObject.cs(58,33,58,41): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
9>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeleteObject\CS\DeleteObject.cs(56,16,56,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
11>------ Rebuild All started: Project: DesignOptionReader, Configuration: Debug Any CPU ------
10>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
10>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
10>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeleteObject\VB.NET\DeleteObject.vb(26,9): error BC40056: Namespace or type specified in the Imports 'Autodesk.Revit.DB' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.
10>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeleteObject\VB.NET\DeleteObject.vb(54,50): error BC30002: Type 'Autodesk.Revit.UI.ExternalCommandData' is not defined.
10>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeleteObject\VB.NET\DeleteObject.vb(55,48): error BC30002: Type 'Autodesk.Revit.DB.ElementSet' is not defined.
10>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeleteObject\VB.NET\DeleteObject.vb(56,8): error BC30002: Type 'Autodesk.Revit.UI.Result' is not defined.
10>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeleteObject\VB.NET\DeleteObject.vb(57,16): error BC30002: Type 'Autodesk.Revit.UI.IExternalCommand' is not defined.
10>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeleteObject\VB.NET\DeleteObject.vb(36,16): error BC30002: Type 'Autodesk.Revit.UI.IExternalCommand' is not defined.
10>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeleteObject\VB.NET\DeleteObject.vb(32,2): error BC30002: Type 'Autodesk.Revit.Attributes.Transaction' is not defined.
10>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeleteObject\VB.NET\DeleteObject.vb(33,2): error BC30002: Type 'Autodesk.Revit.Attributes.Regeneration' is not defined.
10>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeleteObject\VB.NET\DeleteObject.vb(34,2): error BC30002: Type 'Autodesk.Revit.Attributes.Journaling' is not defined.
10>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeleteObject\VB.NET\DeleteObject.vb(32,40): error BC30451: 'Autodesk' is not declared. It may be inaccessible due to its protection level.
10>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeleteObject\VB.NET\DeleteObject.vb(33,41): error BC30451: 'Autodesk' is not declared. It may be inaccessible due to its protection level.
10>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeleteObject\VB.NET\DeleteObject.vb(34,39): error BC30451: 'Autodesk' is not declared. It may be inaccessible due to its protection level.
12>------ Rebuild All started: Project: ParameterUtils, Configuration: Debug Any CPU ------
11>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
11>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
11>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DesignOptionReader\VB.NET\Command.vb(22,9): error BC40056: Namespace or type specified in the Imports 'Autodesk' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.
11>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DesignOptionReader\VB.NET\Command.vb(23,9): error BC40056: Namespace or type specified in the Imports 'Autodesk.Revit.DB' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.
11>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DesignOptionReader\VB.NET\Command.vb(48,50): error BC30002: Type 'Autodesk.Revit.UI.ExternalCommandData' is not defined.
11>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DesignOptionReader\VB.NET\Command.vb(49,52): error BC30002: Type 'Autodesk.Revit.DB.ElementSet' is not defined.
11>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DesignOptionReader\VB.NET\Command.vb(50,12): error BC30002: Type 'Autodesk.Revit.UI.Result' is not defined.
11>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DesignOptionReader\VB.NET\Command.vb(50,48): error BC30002: Type 'Autodesk.Revit.UI.IExternalCommand' is not defined.
11>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DesignOptionReader\VB.NET\Command.vb(30,16): error BC30002: Type 'Autodesk.Revit.UI.IExternalCommand' is not defined.
11>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DesignOptionReader\VB.NET\Command.vb(25,2): error BC30002: Type 'Autodesk.Revit.Attributes.Transaction' is not defined.
11>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DesignOptionReader\VB.NET\Command.vb(26,2): error BC30002: Type 'Autodesk.Revit.Attributes.Regeneration' is not defined.
11>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DesignOptionReader\VB.NET\Command.vb(27,2): error BC30002: Type 'Autodesk.Revit.Attributes.Journaling' is not defined.
11>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DesignOptionReader\VB.NET\Command.vb(25,40): error BC30451: 'Autodesk' is not declared. It may be inaccessible due to its protection level.
11>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DesignOptionReader\VB.NET\Command.vb(26,41): error BC30451: 'Autodesk' is not declared. It may be inaccessible due to its protection level.
11>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DesignOptionReader\VB.NET\Command.vb(27,39): error BC30451: 'Autodesk' is not declared. It may be inaccessible due to its protection level.
13>------ Rebuild All started: Project: PhaseSample, Configuration: Debug Any CPU ------
12>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
12>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
12>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
12>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ParameterUtils\CS\Command.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
12>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ParameterUtils\CS\Command.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
12>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ParameterUtils\CS\Command.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
12>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ParameterUtils\CS\Command.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
12>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ParameterUtils\CS\Command.cs(41,28,41,44): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
12>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ParameterUtils\CS\Command.cs(38,6,38,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
12>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ParameterUtils\CS\Command.cs(39,6,39,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
12>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ParameterUtils\CS\Command.cs(40,6,40,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
12>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ParameterUtils\CS\Command.cs(38,44,38,52): error CS0103: The name 'Autodesk' does not exist in the current context
12>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ParameterUtils\CS\Command.cs(39,45,39,53): error CS0103: The name 'Autodesk' does not exist in the current context
12>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ParameterUtils\CS\Command.cs(40,43,40,51): error CS0103: The name 'Autodesk' does not exist in the current context
12>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ParameterUtils\CS\Command.cs(60,49,60,68): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
12>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ParameterUtils\CS\Command.cs(61,13,61,23): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
12>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ParameterUtils\CS\Command.cs(60,16,60,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
14>------ Rebuild All started: Project: SlabProperties (SlabProperties\CS\SlabProperties), Configuration: Debug Any CPU ------
13>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
13>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
14>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
14>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
14>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
14>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabProperties\CS\Command.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
14>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabProperties\CS\Command.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
14>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabProperties\CS\Command.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
14>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabProperties\CS\Command.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
14>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabProperties\CS\Command.cs(41,28,41,44): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
14>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabProperties\CS\Command.cs(38,6,38,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
14>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabProperties\CS\Command.cs(39,6,39,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
14>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabProperties\CS\Command.cs(40,6,40,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
14>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabProperties\CS\Command.cs(38,44,38,52): error CS0103: The name 'Autodesk' does not exist in the current context
14>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabProperties\CS\Command.cs(39,45,39,53): error CS0103: The name 'Autodesk' does not exist in the current context
14>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabProperties\CS\Command.cs(40,43,40,51): error CS0103: The name 'Autodesk' does not exist in the current context
14>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabProperties\CS\Command.cs(91,49,91,57): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
14>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabProperties\CS\Command.cs(91,120,91,128): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
14>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabProperties\CS\Command.cs(91,16,91,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
14>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabProperties\CS\Command.cs(295,33,295,41): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
14>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabProperties\CS\Command.cs(55,9,55,19): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
14>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabProperties\CS\Command.cs(56,9,56,14): error CS0246: The type or namespace name 'Floor' could not be found (are you missing a using directive or an assembly reference?)
14>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabProperties\CS\Command.cs(57,9,57,31): error CS0246: The type or namespace name 'CompoundStructureLayer' could not be found (are you missing a using directive or an assembly reference?)
14>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabProperties\CS\Command.cs(58,42,58,64): error CS0246: The type or namespace name 'CompoundStructureLayer' could not be found (are you missing a using directive or an assembly reference?)
14>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabProperties\CS\Command.cs(59,9,59,17): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
13>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PhaseSample\VB.NET\Command.vb(22,9): error BC40056: Namespace or type specified in the Imports 'Autodesk' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.
13>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PhaseSample\VB.NET\Command.vb(46,50): error BC30002: Type 'Autodesk.Revit.UI.ExternalCommandData' is not defined.
13>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PhaseSample\VB.NET\Command.vb(46,132): error BC30002: Type 'Autodesk.Revit.DB.ElementSet' is not defined.
13>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PhaseSample\VB.NET\Command.vb(46,165): error BC30002: Type 'Autodesk.Revit.UI.Result' is not defined.
13>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PhaseSample\VB.NET\Command.vb(46,201): error BC30002: Type 'Autodesk.Revit.UI.IExternalCommand' is not defined.
13>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PhaseSample\VB.NET\Command.vb(28,16): error BC30002: Type 'Autodesk.Revit.UI.IExternalCommand' is not defined.
13>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PhaseSample\VB.NET\Command.vb(23,2): error BC30002: Type 'Autodesk.Revit.Attributes.Transaction' is not defined.
13>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PhaseSample\VB.NET\Command.vb(24,2): error BC30002: Type 'Autodesk.Revit.Attributes.Regeneration' is not defined.
13>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PhaseSample\VB.NET\Command.vb(25,2): error BC30002: Type 'Autodesk.Revit.Attributes.Journaling' is not defined.
13>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PhaseSample\VB.NET\Command.vb(23,40): error BC30451: 'Autodesk' is not declared. It may be inaccessible due to its protection level.
13>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PhaseSample\VB.NET\Command.vb(24,41): error BC30451: 'Autodesk' is not declared. It may be inaccessible due to its protection level.
13>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PhaseSample\VB.NET\Command.vb(25,39): error BC30451: 'Autodesk' is not declared. It may be inaccessible due to its protection level.
15>------ Rebuild All started: Project: SlabProperties (SlabProperties\VB.NET\SlabProperties), Configuration: Debug Any CPU ------
16>------ Rebuild All started: Project: StructuralLayerFunction (StructuralLayerFunction\CS\StructuralLayerFunction), Configuration: Debug Any CPU ------
15>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
15>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
15>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabProperties\VB.NET\Command.vb(27,9): error BC40056: Namespace or type specified in the Imports 'Autodesk.Revit' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.
15>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabProperties\VB.NET\Command.vb(28,9): error BC40056: Namespace or type specified in the Imports 'Autodesk.Revit.DB' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.
15>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabProperties\VB.NET\Command.vb(29,9): error BC40056: Namespace or type specified in the Imports 'Autodesk.Revit.UI' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.
15>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabProperties\VB.NET\Command.vb(30,9): error BC40056: Namespace or type specified in the Imports 'Autodesk.Revit.DB.Structure' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.
15>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabProperties\VB.NET\Command.vb(50,32): error BC30002: Type 'Autodesk.Revit.DB.ElementSet' is not defined.
15>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabProperties\VB.NET\Command.vb(51,28): error BC30002: Type 'Autodesk.Revit.DB.Floor' is not defined.
15>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabProperties\VB.NET\Command.vb(52,28): error BC30002: Type 'Autodesk.Revit.DB.CompoundStructureLayer' is not defined.
15>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabProperties\VB.NET\Command.vb(53,74): error BC30002: Type 'Autodesk.Revit.DB.CompoundStructureLayer' is not defined.
15>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabProperties\VB.NET\Command.vb(54,27): error BC30002: Type 'Autodesk.Revit.DB.Document' is not defined.
15>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabProperties\VB.NET\Command.vb(82,50): error BC30002: Type 'ExternalCommandData' is not defined.
15>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabProperties\VB.NET\Command.vb(82,114): error BC30002: Type 'Autodesk.Revit.DB.ElementSet' is not defined.
15>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabProperties\VB.NET\Command.vb(83,8): error BC30002: Type 'Autodesk.Revit.UI.Result' is not defined.
15>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabProperties\VB.NET\Command.vb(83,44): error BC30002: Type 'IExternalCommand' is not defined.
15>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabProperties\VB.NET\Command.vb(286,48): error BC30002: Type 'Autodesk.Revit.UI.UIApplication' is not defined.
15>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabProperties\VB.NET\Command.vb(42,16): error BC30002: Type 'IExternalCommand' is not defined.
15>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabProperties\VB.NET\Command.vb(38,2): error BC30002: Type 'Autodesk.Revit.Attributes.Transaction' is not defined.
15>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabProperties\VB.NET\Command.vb(39,2): error BC30002: Type 'Autodesk.Revit.Attributes.Regeneration' is not defined.
15>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabProperties\VB.NET\Command.vb(40,2): error BC30002: Type 'Autodesk.Revit.Attributes.Journaling' is not defined.
15>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabProperties\VB.NET\Command.vb(38,40): error BC30451: 'Autodesk' is not declared. It may be inaccessible due to its protection level.
15>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabProperties\VB.NET\Command.vb(39,41): error BC30451: 'Autodesk' is not declared. It may be inaccessible due to its protection level.
15>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabProperties\VB.NET\Command.vb(40,39): error BC30451: 'Autodesk' is not declared. It may be inaccessible due to its protection level.
17>------ Rebuild All started: Project: StructuralLayerFunction (StructuralLayerFunction\VB.NET\StructuralLayerFunction), Configuration: Debug Any CPU ------
16>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
16>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
16>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
16>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructuralLayerFunction\CS\Command.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
16>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructuralLayerFunction\CS\Command.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
16>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructuralLayerFunction\CS\Command.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
16>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructuralLayerFunction\CS\Command.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
16>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructuralLayerFunction\CS\Command.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
16>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructuralLayerFunction\CS\Command.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
16>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructuralLayerFunction\CS\Command.cs(45,28,45,44): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
16>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructuralLayerFunction\CS\Command.cs(42,6,42,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
16>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructuralLayerFunction\CS\Command.cs(43,6,43,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
16>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructuralLayerFunction\CS\Command.cs(44,6,44,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
16>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructuralLayerFunction\CS\Command.cs(42,44,42,52): error CS0103: The name 'Autodesk' does not exist in the current context
16>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructuralLayerFunction\CS\Command.cs(43,45,43,53): error CS0103: The name 'Autodesk' does not exist in the current context
16>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructuralLayerFunction\CS\Command.cs(44,43,44,51): error CS0103: The name 'Autodesk' does not exist in the current context
16>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructuralLayerFunction\CS\Command.cs(96,49,96,57): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
16>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructuralLayerFunction\CS\Command.cs(97,69,97,77): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
16>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructuralLayerFunction\CS\Command.cs(96,16,96,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
16>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructuralLayerFunction\CS\Command.cs(48,9,48,17): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
18>------ Rebuild All started: Project: TestWallThickness, Configuration: Debug Any CPU ------
18>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
18>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
18>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TestWallThickness\VB.NET\Command.vb(48,49): error BC30002: Type 'Autodesk.Revit.UI.ExternalCommandData' is not defined.
18>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TestWallThickness\VB.NET\Command.vb(49,26): error BC30002: Type 'Autodesk.Revit.DB.ElementSet' is not defined.
18>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TestWallThickness\VB.NET\Command.vb(49,59): error BC30002: Type 'Autodesk.Revit.UI.Result' is not defined.
18>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TestWallThickness\VB.NET\Command.vb(50,19): error BC30002: Type 'Autodesk.Revit.UI.IExternalCommand' is not defined.
18>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TestWallThickness\VB.NET\Command.vb(29,15): error BC30002: Type 'Autodesk.Revit.UI.IExternalCommand' is not defined.
18>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TestWallThickness\VB.NET\Command.vb(24,2): error BC30002: Type 'Autodesk.Revit.Attributes.Transaction' is not defined.
18>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TestWallThickness\VB.NET\Command.vb(25,2): error BC30002: Type 'Autodesk.Revit.Attributes.Regeneration' is not defined.
18>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TestWallThickness\VB.NET\Command.vb(26,2): error BC30002: Type 'Autodesk.Revit.Attributes.Journaling' is not defined.
18>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TestWallThickness\VB.NET\Command.vb(24,40): error BC30451: 'Autodesk' is not declared. It may be inaccessible due to its protection level.
18>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TestWallThickness\VB.NET\Command.vb(25,41): error BC30451: 'Autodesk' is not declared. It may be inaccessible due to its protection level.
18>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TestWallThickness\VB.NET\Command.vb(26,39): error BC30451: 'Autodesk' is not declared. It may be inaccessible due to its protection level.
19>------ Rebuild All started: Project: VersionChecking, Configuration: Debug Any CPU ------
17>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
17>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
17>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructuralLayerFunction\VB.NET\Command.vb(28,9): error BC40056: Namespace or type specified in the Imports 'Autodesk.Revit' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.
17>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructuralLayerFunction\VB.NET\Command.vb(29,9): error BC40056: Namespace or type specified in the Imports 'Autodesk.Revit.DB' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.
17>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructuralLayerFunction\VB.NET\Command.vb(30,9): error BC40056: Namespace or type specified in the Imports 'Autodesk.Revit.UI' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.
17>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructuralLayerFunction\VB.NET\Command.vb(31,9): error BC40056: Namespace or type specified in the Imports 'Autodesk.Revit.DB.Structure' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.
17>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructuralLayerFunction\VB.NET\Command.vb(46,23): error BC30002: Type 'Autodesk.Revit.DB.Floor' is not defined.
17>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructuralLayerFunction\VB.NET\Command.vb(77,50): error BC30002: Type 'Autodesk.Revit.UI.ExternalCommandData' is not defined.
17>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructuralLayerFunction\VB.NET\Command.vb(78,9): error BC30002: Type 'Autodesk.Revit.DB.ElementSet' is not defined.
17>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructuralLayerFunction\VB.NET\Command.vb(78,42): error BC30002: Type 'Autodesk.Revit.UI.Result' is not defined.
17>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructuralLayerFunction\VB.NET\Command.vb(79,6): error BC30002: Type 'Autodesk.Revit.UI.IExternalCommand' is not defined.
17>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructuralLayerFunction\VB.NET\Command.vb(43,16): error BC30002: Type 'IExternalCommand' is not defined.
17>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructuralLayerFunction\VB.NET\Command.vb(39,2): error BC30002: Type 'Autodesk.Revit.Attributes.Transaction' is not defined.
17>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructuralLayerFunction\VB.NET\Command.vb(40,2): error BC30002: Type 'Autodesk.Revit.Attributes.Regeneration' is not defined.
17>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructuralLayerFunction\VB.NET\Command.vb(41,2): error BC30002: Type 'Autodesk.Revit.Attributes.Journaling' is not defined.
17>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructuralLayerFunction\VB.NET\Command.vb(39,40): error BC30451: 'Autodesk' is not declared. It may be inaccessible due to its protection level.
17>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructuralLayerFunction\VB.NET\Command.vb(40,41): error BC30451: 'Autodesk' is not declared. It may be inaccessible due to its protection level.
17>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructuralLayerFunction\VB.NET\Command.vb(41,39): error BC30451: 'Autodesk' is not declared. It may be inaccessible due to its protection level.
20>------ Rebuild All started: Project: BoundaryConditions, Configuration: Debug Any CPU ------
19>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
19>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
19>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
19>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\VersionChecking\CS\VersionChecking.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
19>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\VersionChecking\CS\VersionChecking.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
19>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\VersionChecking\CS\VersionChecking.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
19>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\VersionChecking\CS\VersionChecking.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
19>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\VersionChecking\CS\VersionChecking.cs(41,27,41,43): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
19>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\VersionChecking\CS\VersionChecking.cs(38,6,38,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
19>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\VersionChecking\CS\VersionChecking.cs(39,6,39,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
19>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\VersionChecking\CS\VersionChecking.cs(40,6,40,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
19>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\VersionChecking\CS\VersionChecking.cs(38,44,38,52): error CS0103: The name 'Autodesk' does not exist in the current context
19>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\VersionChecking\CS\VersionChecking.cs(39,45,39,53): error CS0103: The name 'Autodesk' does not exist in the current context
19>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\VersionChecking\CS\VersionChecking.cs(40,43,40,51): error CS0103: The name 'Autodesk' does not exist in the current context
19>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\VersionChecking\CS\VersionChecking.cs(97,49,97,57): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
19>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\VersionChecking\CS\VersionChecking.cs(99,48,99,58): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
19>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\VersionChecking\CS\VersionChecking.cs(97,16,97,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
21>------ Rebuild All started: Project: BrowseBindings, Configuration: Debug Any CPU ------
20>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
20>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
20>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
20>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BoundaryConditions\CS\BCProperties.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
20>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BoundaryConditions\CS\BCProperties.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
20>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BoundaryConditions\CS\BoundaryConditionsData.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
20>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BoundaryConditions\CS\BoundaryConditionsData.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
20>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BoundaryConditions\CS\BoundaryConditionsData.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
20>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BoundaryConditions\CS\Command.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
20>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BoundaryConditions\CS\Command.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
20>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BoundaryConditions\CS\Command.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
20>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BoundaryConditions\CS\Command.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
20>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BoundaryConditions\CS\BCProperties.cs(591,66,591,87): error CS0246: The type or namespace name 'BuiltInParameterGroup' could not be found (are you missing a using directive or an assembly reference?)
20>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BoundaryConditions\CS\BCProperties.cs(633,42,633,63): error CS0246: The type or namespace name 'BuiltInParameterGroup' could not be found (are you missing a using directive or an assembly reference?)
20>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BoundaryConditions\CS\BCProperties.cs(484,29,484,37): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
20>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BoundaryConditions\CS\BCProperties.cs(180,17,180,25): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
20>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BoundaryConditions\CS\BoundaryConditionsData.cs(80,16,80,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
20>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BoundaryConditions\CS\BoundaryConditionsData.cs(91,32,91,40): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
20>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BoundaryConditions\CS\BoundaryConditionsData.cs(188,35,188,43): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
20>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BoundaryConditions\CS\BoundaryConditionsData.cs(214,78,214,86): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
20>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BoundaryConditions\CS\BoundaryConditionsData.cs(214,17,214,25): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
20>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BoundaryConditions\CS\BoundaryConditionsData.cs(250,77,250,85): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
20>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BoundaryConditions\CS\BoundaryConditionsData.cs(250,17,250,25): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
20>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BoundaryConditions\CS\BoundaryConditionsData.cs(267,77,267,85): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
20>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BoundaryConditions\CS\BoundaryConditionsData.cs(267,17,267,25): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
20>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BoundaryConditions\CS\BoundaryConditionsData.cs(115,39,115,47): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
20>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BoundaryConditions\CS\BoundaryConditionsData.cs(48,17,48,25): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
20>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BoundaryConditions\CS\BoundaryConditionsData.cs(52,33,52,41): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
20>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BoundaryConditions\CS\BoundaryConditionsData.cs(104,26,104,34): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
20>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BoundaryConditions\CS\BoundaryConditionsData.cs(105,33,105,41): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
20>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BoundaryConditions\CS\Command.cs(42,28,42,44): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
20>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BoundaryConditions\CS\Command.cs(39,6,39,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
20>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BoundaryConditions\CS\Command.cs(40,6,40,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
20>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BoundaryConditions\CS\Command.cs(41,6,41,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
20>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BoundaryConditions\CS\Command.cs(39,44,39,52): error CS0103: The name 'Autodesk' does not exist in the current context
20>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BoundaryConditions\CS\Command.cs(40,45,40,53): error CS0103: The name 'Autodesk' does not exist in the current context
20>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BoundaryConditions\CS\Command.cs(41,43,41,51): error CS0103: The name 'Autodesk' does not exist in the current context
20>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BoundaryConditions\CS\Command.cs(60,49,60,68): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
20>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BoundaryConditions\CS\Command.cs(62,48,62,58): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
20>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BoundaryConditions\CS\Command.cs(60,16,60,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
20>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BoundaryConditions\CS\Command.cs(134,40,134,47): error CS0246: The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)
22>------ Rebuild All started: Project: CreateBeamsColumnsBraces (CreateBeamsColumnsBraces\CS\CreateBeamsColumnsBraces), Configuration: Debug Any CPU ------
22>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
22>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
22>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
22>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\CS\CreateBeamsColumnsBraces.cs(37,24,37,32): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
22>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\CS\CreateBeamsColumnsBraces.cs(36,17,36,25): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
22>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\CS\CreateBeamsColumnsBraces.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
22>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\CS\CreateBeamsColumnsBraces.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
22>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\CS\CreateBeamsColumnsBraces.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
22>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\CS\CreateBeamsColumnsBraces.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
22>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\CS\CreateBeamsColumnsBraces.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
22>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\CS\CreateBeamsColumnsBraces.cs(34,7,34,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
22>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\CS\CreateBeamsColumnsBracesForm.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
22>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\CS\CreateBeamsColumnsBraces.cs(47,28,47,44): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
22>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\CS\CreateBeamsColumnsBraces.cs(44,6,44,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
22>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\CS\CreateBeamsColumnsBraces.cs(45,6,45,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
22>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\CS\CreateBeamsColumnsBraces.cs(46,6,46,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
22>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\CS\CreateBeamsColumnsBraces.cs(44,44,44,52): error CS0103: The name 'Autodesk' does not exist in the current context
22>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\CS\CreateBeamsColumnsBraces.cs(45,45,45,53): error CS0103: The name 'Autodesk' does not exist in the current context
22>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\CS\CreateBeamsColumnsBraces.cs(46,43,46,51): error CS0103: The name 'Autodesk' does not exist in the current context
22>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\CS\CreateBeamsColumnsBraces.cs(107,49,107,57): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
22>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\CS\CreateBeamsColumnsBraces.cs(107,114,107,122): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
22>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\CS\CreateBeamsColumnsBraces.cs(107,16,107,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
22>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\CS\CreateBeamsColumnsBraces.cs(322,34,322,42): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
22>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\CS\CreateBeamsColumnsBraces.cs(322,64,322,76): error CS0246: The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)
22>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\CS\CreateBeamsColumnsBraces.cs(322,89,322,94): error CS0246: The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)
22>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\CS\CreateBeamsColumnsBraces.cs(322,106,322,111): error CS0246: The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)
22>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\CS\CreateBeamsColumnsBraces.cs(375,32,375,40): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
22>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\CS\CreateBeamsColumnsBraces.cs(375,63,375,71): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
22>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\CS\CreateBeamsColumnsBraces.cs(375,94,375,99): error CS0246: The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)
22>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\CS\CreateBeamsColumnsBraces.cs(375,111,375,116): error CS0246: The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)
22>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\CS\CreateBeamsColumnsBraces.cs(375,127,375,139): error CS0246: The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)
22>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\CS\CreateBeamsColumnsBraces.cs(398,33,398,41): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
22>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\CS\CreateBeamsColumnsBraces.cs(398,64,398,72): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
22>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\CS\CreateBeamsColumnsBraces.cs(398,95,398,100): error CS0246: The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)
22>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\CS\CreateBeamsColumnsBraces.cs(398,112,398,117): error CS0246: The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)
22>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\CS\CreateBeamsColumnsBraces.cs(398,128,398,140): error CS0246: The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)
22>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\CS\CreateBeamsColumnsBraces.cs(49,9,49,17): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
22>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\CS\CreateBeamsColumnsBraces.cs(56,9,56,17): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
22>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\CS\CreateBeamsColumnsBraces.cs(489,16,489,28): error CS0246: The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)
22>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\CS\CreateBeamsColumnsBraces.cs(465,26,465,38): error CS0246: The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)
22>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\CS\CreateBeamsColumnsBraces.cs(452,9,452,21): error CS0246: The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)
23>------ Rebuild All started: Project: CreateBeamsColumnsBraces (CreateBeamsColumnsBraces\VB.NET\CreateBeamsColumnsBraces), Configuration: Debug Any CPU ------
21>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
21>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
21>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BrowseBindings\VB.NET\BindingsBrowserForm.vb(101,30): error BC30002: Type 'Autodesk.Revit.UI.UIApplication' is not defined.
21>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BrowseBindings\VB.NET\BindingsBrowserForm.vb(111,53): error BC30002: Type 'Autodesk.Revit.UI.UIApplication' is not defined.
21>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BrowseBindings\VB.NET\BindingsBrowserForm.vb(132,44): error BC30002: Type 'Autodesk.Revit.DB.Document' is not defined.
21>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BrowseBindings\VB.NET\BindingsBrowserForm.vb(138,47): error BC30002: Type 'Autodesk.Revit.UI.UIApplication' is not defined.
21>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BrowseBindings\VB.NET\Command.vb(25,9): error BC40056: Namespace or type specified in the Imports 'Autodesk.Revit.DB' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.
21>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BrowseBindings\VB.NET\Command.vb(26,9): error BC40056: Namespace or type specified in the Imports 'Autodesk.Revit.UI' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.
21>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BrowseBindings\VB.NET\Command.vb(50,50): error BC30002: Type 'Autodesk.Revit.UI.ExternalCommandData' is not defined.
21>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BrowseBindings\VB.NET\Command.vb(50,132): error BC30002: Type 'Autodesk.Revit.DB.ElementSet' is not defined.
21>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BrowseBindings\VB.NET\Command.vb(50,165): error BC30002: Type 'Autodesk.Revit.UI.Result' is not defined.
21>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BrowseBindings\VB.NET\Command.vb(50,201): error BC30002: Type 'Autodesk.Revit.UI.IExternalCommand' is not defined.
21>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BrowseBindings\VB.NET\Command.vb(32,16): error BC30002: Type 'Autodesk.Revit.UI.IExternalCommand' is not defined.
21>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BrowseBindings\VB.NET\Command.vb(28,2): error BC30002: Type 'Autodesk.Revit.Attributes.Transaction' is not defined.
21>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BrowseBindings\VB.NET\Command.vb(29,2): error BC30002: Type 'Autodesk.Revit.Attributes.Regeneration' is not defined.
21>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BrowseBindings\VB.NET\Command.vb(30,2): error BC30002: Type 'Autodesk.Revit.Attributes.Journaling' is not defined.
21>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BrowseBindings\VB.NET\Command.vb(28,40): error BC30451: 'Autodesk' is not declared. It may be inaccessible due to its protection level.
21>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BrowseBindings\VB.NET\Command.vb(29,41): error BC30451: 'Autodesk' is not declared. It may be inaccessible due to its protection level.
21>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BrowseBindings\VB.NET\Command.vb(30,39): error BC30451: 'Autodesk' is not declared. It may be inaccessible due to its protection level.
24>------ Rebuild All started: Project: CreateComplexAreaRein, Configuration: Debug Any CPU ------
23>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
23>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
23>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\VB.NET\CreateBeamsColumnsBraces.vb(28,9): error BC40056: Namespace or type specified in the Imports 'Autodesk.Revit' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.
23>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\VB.NET\CreateBeamsColumnsBraces.vb(29,9): error BC40056: Namespace or type specified in the Imports 'Autodesk.Revit.DB.Events' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.
23>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\VB.NET\CreateBeamsColumnsBraces.vb(30,9): error BC40056: Namespace or type specified in the Imports 'Autodesk.Revit.DB' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.
23>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\VB.NET\CreateBeamsColumnsBraces.vb(31,9): error BC40056: Namespace or type specified in the Imports 'Autodesk.Revit.UI' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.
23>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\VB.NET\CreateBeamsColumnsBraces.vb(32,9): error BC40056: Namespace or type specified in the Imports 'Autodesk.Revit.DB.Structure' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.
23>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\VB.NET\CreateBeamsColumnsBraces.vb(33,9): error BC40056: Namespace or type specified in the Imports 'Autodesk.Revit.Creation' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.
23>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\VB.NET\CreateBeamsColumnsBraces.vb(41,24): error BC30002: Type 'Autodesk.Revit.UI.UIApplication' is not defined.
23>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\VB.NET\CreateBeamsColumnsBraces.vb(47,30): error BC30002: Type 'Autodesk.Revit.DB.UV' is not defined.
23>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\VB.NET\CreateBeamsColumnsBraces.vb(441,25): error BC30002: Type 'Autodesk.Revit.DB.FamilySymbol' is not defined.
23>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\VB.NET\CreateBeamsColumnsBraces.vb(101,44): error BC30002: Type 'Autodesk.Revit.UI.ExternalCommandData' is not defined.
23>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\VB.NET\CreateBeamsColumnsBraces.vb(101,126): error BC30002: Type 'Autodesk.Revit.DB.ElementSet' is not defined.
23>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\VB.NET\CreateBeamsColumnsBraces.vb(101,159): error BC30002: Type 'Autodesk.Revit.UI.Result' is not defined.
23>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\VB.NET\CreateBeamsColumnsBraces.vb(455,36): error BC30002: Type 'Autodesk.Revit.DB.FamilySymbol' is not defined.
23>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\VB.NET\CreateBeamsColumnsBraces.vb(101,195): error BC30002: Type 'Autodesk.Revit.UI.IExternalCommand' is not defined.
23>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\VB.NET\CreateBeamsColumnsBraces.vb(470,47): error BC30002: Type 'Autodesk.Revit.DB.FamilySymbol' is not defined.
23>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\VB.NET\CreateBeamsColumnsBraces.vb(324,46): error BC30002: Type 'Autodesk.Revit.DB.UV' is not defined.
23>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\VB.NET\CreateBeamsColumnsBraces.vb(324,88): error BC30002: Type 'Autodesk.Revit.DB.FamilySymbol' is not defined.
23>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\VB.NET\CreateBeamsColumnsBraces.vb(324,139): error BC30002: Type 'Autodesk.Revit.DB.Level' is not defined.
23>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\VB.NET\CreateBeamsColumnsBraces.vb(324,182): error BC30002: Type 'Autodesk.Revit.DB.Level' is not defined.
23>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\VB.NET\CreateBeamsColumnsBraces.vb(372,45): error BC30002: Type 'Autodesk.Revit.DB.UV' is not defined.
23>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\VB.NET\CreateBeamsColumnsBraces.vb(372,85): error BC30002: Type 'Autodesk.Revit.DB.UV' is not defined.
23>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\VB.NET\CreateBeamsColumnsBraces.vb(372,126): error BC30002: Type 'Autodesk.Revit.DB.Level' is not defined.
23>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\VB.NET\CreateBeamsColumnsBraces.vb(372,169): error BC30002: Type 'Autodesk.Revit.DB.Level' is not defined.
23>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\VB.NET\CreateBeamsColumnsBraces.vb(372,212): error BC30002: Type 'Autodesk.Revit.DB.FamilySymbol' is not defined.
23>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\VB.NET\CreateBeamsColumnsBraces.vb(394,46): error BC30002: Type 'Autodesk.Revit.DB.UV' is not defined.
23>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\VB.NET\CreateBeamsColumnsBraces.vb(394,86): error BC30002: Type 'Autodesk.Revit.DB.UV' is not defined.
23>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\VB.NET\CreateBeamsColumnsBraces.vb(394,127): error BC30002: Type 'Autodesk.Revit.DB.Level' is not defined.
23>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\VB.NET\CreateBeamsColumnsBraces.vb(394,170): error BC30002: Type 'Autodesk.Revit.DB.Level' is not defined.
23>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\VB.NET\CreateBeamsColumnsBraces.vb(394,214): error BC30002: Type 'Autodesk.Revit.DB.FamilySymbol' is not defined.
23>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\VB.NET\CreateBeamsColumnsBraces.vb(40,16): error BC30002: Type 'IExternalCommand' is not defined.
23>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\VB.NET\CreateBeamsColumnsBraces.vb(36,2): error BC30002: Type 'Autodesk.Revit.Attributes.Transaction' is not defined.
23>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\VB.NET\CreateBeamsColumnsBraces.vb(37,2): error BC30002: Type 'Autodesk.Revit.Attributes.Regeneration' is not defined.
23>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\VB.NET\CreateBeamsColumnsBraces.vb(38,2): error BC30002: Type 'Autodesk.Revit.Attributes.Journaling' is not defined.
23>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\VB.NET\CreateBeamsColumnsBraces.vb(36,40): error BC30451: 'Autodesk' is not declared. It may be inaccessible due to its protection level.
23>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\VB.NET\CreateBeamsColumnsBraces.vb(37,41): error BC30451: 'Autodesk' is not declared. It may be inaccessible due to its protection level.
23>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamsColumnsBraces\VB.NET\CreateBeamsColumnsBraces.vb(38,39): error BC30451: 'Autodesk' is not declared. It may be inaccessible due to its protection level.
25>------ Rebuild All started: Project: CreateDimensions, Configuration: Debug Any CPU ------
24>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
24>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
24>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
24>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\CreateComplexAreaRein.cs(23,7,23,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
24>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\AreaReinData.cs(35,21,35,29): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
24>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\AreaReinData.cs(34,24,34,32): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
24>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\AreaReinData.cs(30,11,30,19): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
24>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\AreaReinData.cs(31,11,31,19): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
24>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\AreaReinData.cs(32,11,32,19): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
24>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\CreateComplexAreaRein.cs(37,24,37,32): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
24>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\CreateComplexAreaRein.cs(33,11,33,19): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
24>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\CreateComplexAreaRein.cs(34,11,34,19): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
24>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\CreateComplexAreaRein.cs(35,11,35,19): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
24>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\GeomHelper.cs(34,21,34,29): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
24>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\GeomHelper.cs(33,24,33,32): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
24>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\GeomHelper.cs(29,11,29,19): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
24>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\GeomHelper.cs(30,11,30,19): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
24>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\GeomHelper.cs(31,11,31,19): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
24>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\GeomUtil.cs(35,21,35,29): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
24>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\GeomUtil.cs(34,22,34,30): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
24>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\GeomUtil.cs(33,24,33,32): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
24>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\GeomUtil.cs(29,11,29,19): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
24>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\GeomUtil.cs(30,11,30,19): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
24>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\GeomUtil.cs(31,11,31,19): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
24>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\ParameterUtil.cs(34,21,34,29): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
24>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\ParameterUtil.cs(33,24,33,32): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
24>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\ParameterUtil.cs(30,11,30,19): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
24>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\ParameterUtil.cs(31,11,31,19): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
24>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\AreaReinData.cs(74,36,74,53): error CS0246: The type or namespace name 'AreaReinforcement' could not be found (are you missing a using directive or an assembly reference?)
24>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\AreaReinData.cs(97,43,97,60): error CS0246: The type or namespace name 'AreaReinforcement' could not be found (are you missing a using directive or an assembly reference?)
24>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\AreaReinData.cs(48,29,48,37): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
24>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\AreaReinData.cs(43,17,43,25): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
24>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\CreateComplexAreaRein.cs(43,28,43,44): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
24>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\CreateComplexAreaRein.cs(40,6,40,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
24>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\CreateComplexAreaRein.cs(41,6,41,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
24>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\CreateComplexAreaRein.cs(42,6,42,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
24>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\CreateComplexAreaRein.cs(40,44,40,52): error CS0103: The name 'Autodesk' does not exist in the current context
24>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\CreateComplexAreaRein.cs(41,45,41,53): error CS0103: The name 'Autodesk' does not exist in the current context
24>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\CreateComplexAreaRein.cs(42,43,42,51): error CS0103: The name 'Autodesk' does not exist in the current context
24>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\CreateComplexAreaRein.cs(65,49,65,68): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
24>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\CreateComplexAreaRein.cs(66,33,66,41): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
24>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\CreateComplexAreaRein.cs(65,16,65,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
24>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\CreateComplexAreaRein.cs(128,23,128,42): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
24>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\CreateComplexAreaRein.cs(139,37,139,46): error CS0246: The type or namespace name 'Reference' could not be found (are you missing a using directive or an assembly reference?)
24>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\CreateComplexAreaRein.cs(139,64,139,69): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
24>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\CreateComplexAreaRein.cs(139,17,139,22): error CS0246: The type or namespace name 'Floor' could not be found (are you missing a using directive or an assembly reference?)
24>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\CreateComplexAreaRein.cs(45,17,45,27): error CS0246: The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)
24>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\CreateComplexAreaRein.cs(46,24,46,43): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
24>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\GeomHelper.cs(60,34,60,39): error CS0246: The type or namespace name 'Floor' could not be found (are you missing a using directive or an assembly reference?)
24>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\GeomHelper.cs(60,51,60,60): error CS0246: The type or namespace name 'Reference' could not be found (are you missing a using directive or an assembly reference?)
24>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\GeomHelper.cs(60,78,60,83): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
24>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\GeomHelper.cs(100,52,100,57): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
24>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\GeomHelper.cs(100,23,100,28): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
24>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\GeomHelper.cs(43,17,43,25): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
24>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\GeomUtil.cs(50,23,50,32): error CS0246: The type or namespace name 'FaceArray' could not be found (are you missing a using directive or an assembly reference?)
24>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\GeomUtil.cs(82,61,82,65): error CS0246: The type or namespace name 'Face' could not be found (are you missing a using directive or an assembly reference?)
24>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\GeomUtil.cs(82,28,82,36): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
24>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\GeomUtil.cs(102,45,102,49): error CS0246: The type or namespace name 'Face' could not be found (are you missing a using directive or an assembly reference?)
24>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\GeomUtil.cs(123,39,123,43): error CS0246: The type or namespace name 'Face' could not be found (are you missing a using directive or an assembly reference?)
24>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\GeomUtil.cs(123,50,123,54): error CS0246: The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)
24>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\GeomUtil.cs(145,48,145,53): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
24>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\GeomUtil.cs(192,40,192,44): error CS0246: The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)
24>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\GeomUtil.cs(205,46,205,50): error CS0246: The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)
24>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\GeomUtil.cs(205,23,205,27): error CS0246: The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)
24>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\GeomUtil.cs(228,42,228,46): error CS0246: The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)
24>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\GeomUtil.cs(228,23,228,27): error CS0246: The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)
24>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\GeomUtil.cs(249,40,249,44): error CS0246: The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)
24>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\GeomUtil.cs(249,52,249,56): error CS0246: The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)
24>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\GeomUtil.cs(269,53,269,61): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
24>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\GeomUtil.cs(269,79,269,87): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
24>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\GeomUtil.cs(269,24,269,32): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
24>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\GeomUtil.cs(285,53,285,61): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
24>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\GeomUtil.cs(285,79,285,87): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
24>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\GeomUtil.cs(285,24,285,32): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
24>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\GeomUtil.cs(301,55,301,63): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
24>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\GeomUtil.cs(301,24,301,32): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
24>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\GeomUtil.cs(317,58,317,66): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
24>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\GeomUtil.cs(317,84,317,92): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
24>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\GeomUtil.cs(317,24,317,32): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
24>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\GeomUtil.cs(341,41,341,49): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
24>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\GeomUtil.cs(341,67,341,75): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
24>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\ParameterUtil.cs(66,48,66,60): error CS0246: The type or namespace name 'ParameterSet' could not be found (are you missing a using directive or an assembly reference?)
24>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\ParameterUtil.cs(66,23,66,32): error CS0246: The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)
24>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateComplexAreaRein\CS\ParameterUtil.cs(88,53,88,69): error CS0246: The type or namespace name 'BuiltInParameter' could not be found (are you missing a using directive or an assembly reference?)
26>------ Rebuild All started: Project: CreateShared, Configuration: Debug Any CPU ------
26>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
26>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
26>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateShared\VB.NET\Command1.vb(26,9): error BC40056: Namespace or type specified in the Imports 'Autodesk.Revit.DB' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.
26>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateShared\VB.NET\Command1.vb(50,50): error BC30002: Type 'Autodesk.Revit.UI.ExternalCommandData' is not defined.
26>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateShared\VB.NET\Command1.vb(51,27): error BC30002: Type 'Autodesk.Revit.DB.ElementSet' is not defined.
26>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateShared\VB.NET\Command1.vb(51,60): error BC30002: Type 'Autodesk.Revit.UI.Result' is not defined.
26>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateShared\VB.NET\Command1.vb(52,20): error BC30002: Type 'Autodesk.Revit.UI.IExternalCommand' is not defined.
26>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateShared\VB.NET\Command1.vb(32,16): error BC30002: Type 'Autodesk.Revit.UI.IExternalCommand' is not defined.
26>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateShared\VB.NET\Command1.vb(28,2): error BC30002: Type 'Autodesk.Revit.Attributes.Transaction' is not defined.
26>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateShared\VB.NET\Command1.vb(29,2): error BC30002: Type 'Autodesk.Revit.Attributes.Regeneration' is not defined.
26>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateShared\VB.NET\Command1.vb(30,2): error BC30002: Type 'Autodesk.Revit.Attributes.Journaling' is not defined.
26>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateShared\VB.NET\Command1.vb(28,40): error BC30451: 'Autodesk' is not declared. It may be inaccessible due to its protection level.
26>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateShared\VB.NET\Command1.vb(29,41): error BC30451: 'Autodesk' is not declared. It may be inaccessible due to its protection level.
26>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateShared\VB.NET\Command1.vb(30,39): error BC30451: 'Autodesk' is not declared. It may be inaccessible due to its protection level.
26>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateShared\VB.NET\Command2.vb(25,9): error BC40056: Namespace or type specified in the Imports 'Autodesk.Revit.DB' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.
26>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateShared\VB.NET\Command2.vb(49,50): error BC30002: Type 'Autodesk.Revit.UI.ExternalCommandData' is not defined.
26>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateShared\VB.NET\Command2.vb(50,27): error BC30002: Type 'Autodesk.Revit.DB.ElementSet' is not defined.
26>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateShared\VB.NET\Command2.vb(50,60): error BC30002: Type 'Autodesk.Revit.UI.Result' is not defined.
26>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateShared\VB.NET\Command2.vb(51,20): error BC30002: Type 'Autodesk.Revit.UI.IExternalCommand' is not defined.
26>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateShared\VB.NET\Command2.vb(31,16): error BC30002: Type 'Autodesk.Revit.UI.IExternalCommand' is not defined.
26>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateShared\VB.NET\Command2.vb(27,2): error BC30002: Type 'Autodesk.Revit.Attributes.Transaction' is not defined.
26>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateShared\VB.NET\Command2.vb(28,2): error BC30002: Type 'Autodesk.Revit.Attributes.Regeneration' is not defined.
26>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateShared\VB.NET\Command2.vb(29,2): error BC30002: Type 'Autodesk.Revit.Attributes.Journaling' is not defined.
26>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateShared\VB.NET\Command2.vb(27,40): error BC30451: 'Autodesk' is not declared. It may be inaccessible due to its protection level.
26>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateShared\VB.NET\Command2.vb(28,41): error BC30451: 'Autodesk' is not declared. It may be inaccessible due to its protection level.
26>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateShared\VB.NET\Command2.vb(29,39): error BC30451: 'Autodesk' is not declared. It may be inaccessible due to its protection level.
27>------ Rebuild All started: Project: CreateSimpleAreaRein, Configuration: Debug Any CPU ------
25>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
25>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
25>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
25>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateDimensions\CS\Command.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
25>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateDimensions\CS\Command.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
25>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateDimensions\CS\Command.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
25>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateDimensions\CS\Command.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
25>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateDimensions\CS\Command.cs(34,7,34,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
25>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateDimensions\CS\Command.cs(45,28,45,44): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
25>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateDimensions\CS\Command.cs(42,6,42,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
25>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateDimensions\CS\Command.cs(43,6,43,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
25>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateDimensions\CS\Command.cs(44,6,44,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
25>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateDimensions\CS\Command.cs(42,44,42,52): error CS0103: The name 'Autodesk' does not exist in the current context
25>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateDimensions\CS\Command.cs(43,45,43,53): error CS0103: The name 'Autodesk' does not exist in the current context
25>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateDimensions\CS\Command.cs(44,43,44,51): error CS0103: The name 'Autodesk' does not exist in the current context
25>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateDimensions\CS\Command.cs(68,49,68,68): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
25>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateDimensions\CS\Command.cs(68,96,68,104): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
25>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateDimensions\CS\Command.cs(68,16,68,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
25>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateDimensions\CS\Command.cs(47,9,47,28): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
28>------ Rebuild All started: Project: CreateViewSection, Configuration: Debug Any CPU ------
28>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
28>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
28>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
28>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\Command.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
28>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\Command.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
28>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\Command.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
28>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\Command.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
28>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\Command.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
28>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\XYZMath.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
28>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\Command.cs(44,28,44,44): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
28>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\Command.cs(41,6,41,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
28>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\Command.cs(42,6,42,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
28>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\Command.cs(43,6,43,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
28>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\Command.cs(41,44,41,52): error CS0103: The name 'Autodesk' does not exist in the current context
28>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\Command.cs(42,45,42,53): error CS0103: The name 'Autodesk' does not exist in the current context
28>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\Command.cs(43,43,43,51): error CS0103: The name 'Autodesk' does not exist in the current context
28>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\Command.cs(92,49,92,68): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
28>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\Command.cs(93,73,93,81): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
28>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\Command.cs(92,16,92,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
28>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\Command.cs(254,9,254,18): error CS0246: The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)
28>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\Command.cs(283,9,283,18): error CS0246: The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)
28>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\Command.cs(321,9,321,18): error CS0246: The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)
28>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\Command.cs(376,9,376,18): error CS0246: The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)
28>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\Command.cs(420,45,420,49): error CS0246: The type or namespace name 'Wall' could not be found (are you missing a using directive or an assembly reference?)
28>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\Command.cs(47,9,47,17): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
28>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\Command.cs(51,9,51,23): error CS0246: The type or namespace name 'BoundingBoxXYZ' could not be found (are you missing a using directive or an assembly reference?)
28>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\Command.cs(52,9,52,17): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
28>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\Command.cs(440,39,440,55): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
28>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\Command.cs(438,6,438,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
28>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\Command.cs(439,6,439,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
28>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\Command.cs(438,44,438,52): error CS0103: The name 'Autodesk' does not exist in the current context
28>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\Command.cs(439,45,439,53): error CS0103: The name 'Autodesk' does not exist in the current context
28>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\Command.cs(443,11,443,30): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
28>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\Command.cs(445,11,445,21): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
28>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\Command.cs(442,16,442,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
28>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\XYZMath.cs(49,58,49,66): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
28>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\XYZMath.cs(49,87,49,95): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
28>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\XYZMath.cs(49,23,49,31): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
28>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\XYZMath.cs(64,43,64,51): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
28>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\XYZMath.cs(64,72,64,80): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
28>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\XYZMath.cs(78,59,78,67): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
28>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\XYZMath.cs(78,88,78,96): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
28>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\XYZMath.cs(78,23,78,31): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
28>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\XYZMath.cs(94,64,94,72): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
28>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\XYZMath.cs(94,23,94,31): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
28>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\XYZMath.cs(114,61,114,69): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
28>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\XYZMath.cs(114,23,114,31): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
28>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\XYZMath.cs(130,61,130,71): error CS0246: The type or namespace name 'CurveArray' could not be found (are you missing a using directive or an assembly reference?)
28>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\XYZMath.cs(130,23,130,31): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
28>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\XYZMath.cs(192,67,192,77): error CS0246: The type or namespace name 'CurveArray' could not be found (are you missing a using directive or an assembly reference?)
28>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\XYZMath.cs(192,23,192,31): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
28>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\XYZMath.cs(219,68,219,78): error CS0246: The type or namespace name 'CurveArray' could not be found (are you missing a using directive or an assembly reference?)
28>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateViewSection\CS\XYZMath.cs(219,23,219,31): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
29>------ Rebuild All started: Project: CreateWallsUnderBeams, Configuration: Debug Any CPU ------
27>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
27>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
27>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
27>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\CreateSimpleAreaRein.cs(23,7,23,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
27>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\AreaReinData.cs(35,21,35,29): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
27>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\AreaReinData.cs(34,24,34,32): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
27>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\AreaReinData.cs(30,11,30,19): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
27>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\AreaReinData.cs(31,11,31,19): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
27>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\AreaReinData.cs(32,11,32,19): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
27>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\CreateSimpleAreaRein.cs(36,24,36,32): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
27>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\CreateSimpleAreaRein.cs(32,11,32,19): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
27>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\CreateSimpleAreaRein.cs(33,11,33,19): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
27>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\CreateSimpleAreaRein.cs(34,11,34,19): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
27>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\GeomHelper.cs(34,21,34,29): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
27>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\GeomHelper.cs(33,24,33,32): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
27>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\GeomHelper.cs(29,11,29,19): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
27>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\GeomHelper.cs(30,11,30,19): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
27>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\GeomHelper.cs(31,11,31,19): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
27>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\GeomUtil.cs(35,21,35,29): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
27>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\GeomUtil.cs(34,22,34,30): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
27>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\GeomUtil.cs(33,24,33,32): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
27>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\GeomUtil.cs(29,11,29,19): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
27>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\GeomUtil.cs(30,11,30,19): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
27>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\GeomUtil.cs(31,11,31,19): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
27>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\ParameterUtil.cs(34,21,34,29): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
27>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\ParameterUtil.cs(33,24,33,32): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
27>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\ParameterUtil.cs(30,11,30,19): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
27>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\ParameterUtil.cs(31,11,31,19): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
27>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\AreaReinData.cs(72,36,72,53): error CS0246: The type or namespace name 'AreaReinforcement' could not be found (are you missing a using directive or an assembly reference?)
27>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\AreaReinData.cs(168,37,168,54): error CS0246: The type or namespace name 'AreaReinforcement' could not be found (are you missing a using directive or an assembly reference?)
27>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\AreaReinData.cs(276,37,276,54): error CS0246: The type or namespace name 'AreaReinforcement' could not be found (are you missing a using directive or an assembly reference?)
27>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\CreateSimpleAreaRein.cs(45,28,45,44): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
27>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\CreateSimpleAreaRein.cs(42,6,42,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
27>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\CreateSimpleAreaRein.cs(43,6,43,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
27>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\CreateSimpleAreaRein.cs(44,6,44,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
27>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\CreateSimpleAreaRein.cs(42,44,42,52): error CS0103: The name 'Autodesk' does not exist in the current context
27>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\CreateSimpleAreaRein.cs(43,45,43,53): error CS0103: The name 'Autodesk' does not exist in the current context
27>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\CreateSimpleAreaRein.cs(44,43,44,51): error CS0103: The name 'Autodesk' does not exist in the current context
27>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\CreateSimpleAreaRein.cs(66,49,66,68): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
27>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\CreateSimpleAreaRein.cs(67,33,67,41): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
27>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\CreateSimpleAreaRein.cs(66,16,66,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
27>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\CreateSimpleAreaRein.cs(103,23,103,42): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
27>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\CreateSimpleAreaRein.cs(158,44,158,49): error CS0246: The type or namespace name 'Floor' could not be found (are you missing a using directive or an assembly reference?)
27>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\CreateSimpleAreaRein.cs(206,43,206,47): error CS0246: The type or namespace name 'Wall' could not be found (are you missing a using directive or an assembly reference?)
27>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\CreateSimpleAreaRein.cs(47,17,47,27): error CS0246: The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)
27>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\CreateSimpleAreaRein.cs(48,24,48,43): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
27>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\GeomHelper.cs(60,33,60,37): error CS0246: The type or namespace name 'Wall' could not be found (are you missing a using directive or an assembly reference?)
27>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\GeomHelper.cs(60,48,60,57): error CS0246: The type or namespace name 'Reference' could not be found (are you missing a using directive or an assembly reference?)
27>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\GeomHelper.cs(60,75,60,80): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
27>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\GeomHelper.cs(114,34,114,39): error CS0246: The type or namespace name 'Floor' could not be found (are you missing a using directive or an assembly reference?)
27>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\GeomHelper.cs(114,51,114,60): error CS0246: The type or namespace name 'Reference' could not be found (are you missing a using directive or an assembly reference?)
27>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\GeomHelper.cs(114,78,114,83): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
27>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\GeomHelper.cs(43,17,43,25): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
27>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\GeomUtil.cs(49,23,49,32): error CS0246: The type or namespace name 'FaceArray' could not be found (are you missing a using directive or an assembly reference?)
27>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\GeomUtil.cs(82,61,82,65): error CS0246: The type or namespace name 'Face' could not be found (are you missing a using directive or an assembly reference?)
27>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\GeomUtil.cs(82,28,82,36): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
27>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\GeomUtil.cs(100,45,100,49): error CS0246: The type or namespace name 'Face' could not be found (are you missing a using directive or an assembly reference?)
27>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\GeomUtil.cs(121,39,121,43): error CS0246: The type or namespace name 'Face' could not be found (are you missing a using directive or an assembly reference?)
27>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\GeomUtil.cs(121,50,121,54): error CS0246: The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)
27>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\GeomUtil.cs(143,48,143,53): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
27>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\GeomUtil.cs(191,40,191,44): error CS0246: The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)
27>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\GeomUtil.cs(191,52,191,56): error CS0246: The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)
27>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\GeomUtil.cs(211,53,211,61): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
27>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\GeomUtil.cs(211,79,211,87): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
27>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\GeomUtil.cs(211,24,211,32): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
27>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\GeomUtil.cs(227,58,227,66): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
27>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\GeomUtil.cs(227,84,227,92): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
27>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\GeomUtil.cs(227,24,227,32): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
27>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\GeomUtil.cs(251,41,251,49): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
27>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\GeomUtil.cs(251,67,251,75): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
27>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\ParameterUtil.cs(56,48,56,60): error CS0246: The type or namespace name 'ParameterSet' could not be found (are you missing a using directive or an assembly reference?)
27>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\ParameterUtil.cs(56,23,56,32): error CS0246: The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)
27>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateSimpleAreaRein\CS\ParameterUtil.cs(78,53,78,69): error CS0246: The type or namespace name 'BuiltInParameter' could not be found (are you missing a using directive or an assembly reference?)
30>------ Rebuild All started: Project: DeleteDimensions, Configuration: Debug Any CPU ------
29>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
29>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
29>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
29>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateWallsUnderBeams\CS\CreateWallsUnderBeams.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
29>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateWallsUnderBeams\CS\CreateWallsUnderBeams.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
29>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateWallsUnderBeams\CS\CreateWallsUnderBeams.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
29>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateWallsUnderBeams\CS\CreateWallsUnderBeams.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
29>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateWallsUnderBeams\CS\CreateWallsUnderBeams.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
29>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateWallsUnderBeams\CS\CreateWallsUnderBeams.cs(43,42,43,58): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
29>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateWallsUnderBeams\CS\CreateWallsUnderBeams.cs(40,6,40,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
29>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateWallsUnderBeams\CS\CreateWallsUnderBeams.cs(41,6,41,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
29>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateWallsUnderBeams\CS\CreateWallsUnderBeams.cs(42,6,42,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
29>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateWallsUnderBeams\CS\CreateWallsUnderBeams.cs(40,44,40,52): error CS0103: The name 'Autodesk' does not exist in the current context
29>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateWallsUnderBeams\CS\CreateWallsUnderBeams.cs(41,45,41,53): error CS0103: The name 'Autodesk' does not exist in the current context
29>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateWallsUnderBeams\CS\CreateWallsUnderBeams.cs(42,43,42,51): error CS0103: The name 'Autodesk' does not exist in the current context
29>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateWallsUnderBeams\CS\CreateWallsUnderBeams.cs(58,22,58,30): error CS0246: The type or namespace name 'WallType' could not be found (are you missing a using directive or an assembly reference?)
29>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateWallsUnderBeams\CS\CreateWallsUnderBeams.cs(120,49,120,68): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
29>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateWallsUnderBeams\CS\CreateWallsUnderBeams.cs(121,73,121,81): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
29>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateWallsUnderBeams\CS\CreateWallsUnderBeams.cs(120,16,120,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
29>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateWallsUnderBeams\CS\CreateWallsUnderBeams.cs(188,29,188,37): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
29>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateWallsUnderBeams\CS\CreateWallsUnderBeams.cs(46,15,46,23): error CS0246: The type or namespace name 'WallType' could not be found (are you missing a using directive or an assembly reference?)
29>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateWallsUnderBeams\CS\CreateWallsUnderBeams.cs(48,9,48,17): error CS0246: The type or namespace name 'WallType' could not be found (are you missing a using directive or an assembly reference?)
29>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateWallsUnderBeams\CS\CreateWallsUnderBeams.cs(49,9,49,14): error CS0246: The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)
31>------ Rebuild All started: Project: FireRating, Configuration: Debug Any CPU ------
30>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
30>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
30>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
30>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeleteDimensions\CS\DeleteDimesions.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
30>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeleteDimensions\CS\DeleteDimesions.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
30>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeleteDimensions\CS\DeleteDimesions.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
30>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeleteDimensions\CS\DeleteDimesions.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
30>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeleteDimensions\CS\DeleteDimesions.cs(42,27,42,43): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
30>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeleteDimensions\CS\DeleteDimesions.cs(39,5,39,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
30>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeleteDimensions\CS\DeleteDimesions.cs(40,5,40,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
30>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeleteDimensions\CS\DeleteDimesions.cs(41,5,41,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
30>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeleteDimensions\CS\DeleteDimesions.cs(39,43,39,51): error CS0103: The name 'Autodesk' does not exist in the current context
30>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeleteDimensions\CS\DeleteDimesions.cs(40,44,40,52): error CS0103: The name 'Autodesk' does not exist in the current context
30>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeleteDimensions\CS\DeleteDimesions.cs(41,42,41,50): error CS0103: The name 'Autodesk' does not exist in the current context
30>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeleteDimensions\CS\DeleteDimesions.cs(60,47,60,66): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
30>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeleteDimensions\CS\DeleteDimesions.cs(61,31,61,39): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
30>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DeleteDimensions\CS\DeleteDimesions.cs(60,14,60,22): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
32>------ Rebuild All started: Project: FoundationSlab, Configuration: Debug Any CPU ------
31>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
31>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
31>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ApplyParameter.vb(22,9): error BC40056: Namespace or type specified in the Imports 'Autodesk.Revit' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.
31>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ApplyParameter.vb(23,9): error BC40056: Namespace or type specified in the Imports 'Autodesk.Revit.UI' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.
31>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ApplyParameter.vb(48,49): error BC30002: Type 'ExternalCommandData' is not defined.
31>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ApplyParameter.vb(48,113): error BC30002: Type 'Autodesk.Revit.DB.ElementSet' is not defined.
31>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ApplyParameter.vb(48,146): error BC30002: Type 'Autodesk.Revit.UI.Result' is not defined.
31>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ApplyParameter.vb(48,182): error BC30002: Type 'Autodesk.Revit.UI.IExternalCommand' is not defined.
31>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ApplyParameter.vb(90,62): error BC30002: Type 'Autodesk.Revit.ApplicationServices.Application' is not defined.
31>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ApplyParameter.vb(90,113): error BC30002: Type 'Autodesk.Revit.DB.DefinitionFile' is not defined.
31>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ApplyParameter.vb(112,61): error BC30002: Type 'Autodesk.Revit.DB.DefinitionFile' is not defined.
31>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ApplyParameter.vb(112,98): error BC30002: Type 'Autodesk.Revit.DB.DefinitionGroup' is not defined.
31>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ApplyParameter.vb(124,55): error BC30002: Type 'Autodesk.Revit.DB.DefinitionGroup' is not defined.
31>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ApplyParameter.vb(124,93): error BC30002: Type 'Autodesk.Revit.DB.Definition' is not defined.
31>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ApplyParameter.vb(30,15): error BC30002: Type 'Autodesk.Revit.UI.IExternalCommand' is not defined.
31>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ApplyParameter.vb(25,2): error BC30002: Type 'Autodesk.Revit.Attributes.Transaction' is not defined.
31>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ApplyParameter.vb(26,2): error BC30002: Type 'Autodesk.Revit.Attributes.Regeneration' is not defined.
31>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ApplyParameter.vb(27,2): error BC30002: Type 'Autodesk.Revit.Attributes.Journaling' is not defined.
31>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ApplyParameter.vb(25,40): error BC30451: 'Autodesk' is not declared. It may be inaccessible due to its protection level.
31>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ApplyParameter.vb(26,41): error BC30451: 'Autodesk' is not declared. It may be inaccessible due to its protection level.
31>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ApplyParameter.vb(27,39): error BC30451: 'Autodesk' is not declared. It may be inaccessible due to its protection level.
31>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ExportFireRating.vb(23,9): error BC40056: Namespace or type specified in the Imports 'Autodesk.Revit' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.
31>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ExportFireRating.vb(24,9): error BC40056: Namespace or type specified in the Imports 'Autodesk.Revit.DB' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.
31>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ExportFireRating.vb(25,9): error BC40056: Namespace or type specified in the Imports 'Autodesk.Revit.UI' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.
31>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ExportFireRating.vb(51,50): error BC30002: Type 'ExternalCommandData' is not defined.
31>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ExportFireRating.vb(51,114): error BC30002: Type 'Autodesk.Revit.DB.ElementSet' is not defined.
31>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ExportFireRating.vb(51,147): error BC30002: Type 'Autodesk.Revit.UI.Result' is not defined.
31>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ExportFireRating.vb(51,183): error BC30002: Type 'Autodesk.Revit.UI.IExternalCommand' is not defined.
31>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ExportFireRating.vb(91,44): error BC30002: Type 'Autodesk.Revit.ApplicationServices.Application' is not defined.
31>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ExportFireRating.vb(138,83): error BC30002: Type 'Autodesk.Revit.ApplicationServices.Application' is not defined.
31>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ExportFireRating.vb(138,151): error BC30002: Type 'Autodesk.Revit.DB.ElementSet' is not defined.
31>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ExportFireRating.vb(33,16): error BC30002: Type 'Autodesk.Revit.UI.IExternalCommand' is not defined.
31>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ExportFireRating.vb(28,2): error BC30002: Type 'Autodesk.Revit.Attributes.Transaction' is not defined.
31>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ExportFireRating.vb(29,2): error BC30002: Type 'Autodesk.Revit.Attributes.Regeneration' is not defined.
31>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ExportFireRating.vb(30,2): error BC30002: Type 'Autodesk.Revit.Attributes.Journaling' is not defined.
31>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ExportFireRating.vb(28,40): error BC30451: 'Autodesk' is not declared. It may be inaccessible due to its protection level.
31>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ExportFireRating.vb(29,41): error BC30451: 'Autodesk' is not declared. It may be inaccessible due to its protection level.
31>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ExportFireRating.vb(30,39): error BC30451: 'Autodesk' is not declared. It may be inaccessible due to its protection level.
31>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ImportFireRating.vb(23,9): error BC40056: Namespace or type specified in the Imports 'Autodesk.Revit' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.
31>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ImportFireRating.vb(24,9): error BC40056: Namespace or type specified in the Imports 'Autodesk.Revit.DB' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.
31>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ImportFireRating.vb(25,9): error BC40056: Namespace or type specified in the Imports 'Autodesk.Revit.UI' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.
31>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ImportFireRating.vb(52,49): error BC30002: Type 'ExternalCommandData' is not defined.
31>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ImportFireRating.vb(52,113): error BC30002: Type 'Autodesk.Revit.DB.ElementSet' is not defined.
31>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ImportFireRating.vb(52,146): error BC30002: Type 'Autodesk.Revit.UI.Result' is not defined.
31>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ImportFireRating.vb(52,182): error BC30002: Type 'Autodesk.Revit.UI.IExternalCommand' is not defined.
31>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ImportFireRating.vb(34,15): error BC30002: Type 'Autodesk.Revit.UI.IExternalCommand' is not defined.
31>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ImportFireRating.vb(28,2): error BC30002: Type 'Autodesk.Revit.Attributes.Transaction' is not defined.
31>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ImportFireRating.vb(29,2): error BC30002: Type 'Autodesk.Revit.Attributes.Regeneration' is not defined.
31>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ImportFireRating.vb(30,2): error BC30002: Type 'Autodesk.Revit.Attributes.Journaling' is not defined.
31>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ImportFireRating.vb(28,40): error BC30451: 'Autodesk' is not declared. It may be inaccessible due to its protection level.
31>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ImportFireRating.vb(29,41): error BC30451: 'Autodesk' is not declared. It may be inaccessible due to its protection level.
31>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FireRating\VB.NET\ImportFireRating.vb(30,39): error BC30451: 'Autodesk' is not declared. It may be inaccessible due to its protection level.
32>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
32>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
32>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
32>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\Command.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
32>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\Command.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
32>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\SlabData.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
32>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\SlabData.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
32>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\SlabData.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
32>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\SlabData.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
32>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\SlabData.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
32>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\RegularSlab.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
32>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\RegularSlab.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
32>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\RegularSlab.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
32>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\Sketch.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
32>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\Command.cs(38,28,38,44): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
32>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\Command.cs(35,6,35,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
32>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\Command.cs(36,5,36,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
32>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\Command.cs(37,6,37,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
32>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\Command.cs(35,44,35,52): error CS0103: The name 'Autodesk' does not exist in the current context
32>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\Command.cs(36,44,36,52): error CS0103: The name 'Autodesk' does not exist in the current context
32>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\Command.cs(37,43,37,51): error CS0103: The name 'Autodesk' does not exist in the current context
32>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\Command.cs(57,49,57,68): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
32>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\Command.cs(57,102,57,110): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
32>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\Command.cs(57,16,57,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
32>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\SlabData.cs(76,33,76,42): error CS0246: The type or namespace name 'FloorType' could not be found (are you missing a using directive or an assembly reference?)
32>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\SlabData.cs(272,41,272,55): error CS0246: The type or namespace name 'BoundingBoxXYZ' could not be found (are you missing a using directive or an assembly reference?)
32>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\SlabData.cs(272,63,272,68): error CS0246: The type or namespace name 'Floor' could not be found (are you missing a using directive or an assembly reference?)
32>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\SlabData.cs(298,42,298,47): error CS0246: The type or namespace name 'Floor' could not be found (are you missing a using directive or an assembly reference?)
32>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\SlabData.cs(298,15,298,25): error CS0246: The type or namespace name 'CurveArray' could not be found (are you missing a using directive or an assembly reference?)
32>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\SlabData.cs(94,23,94,36): error CS0246: The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)
32>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\SlabData.cs(44,21,44,29): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
32>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\SlabData.cs(45,21,45,29): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
32>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\SlabData.cs(47,7,47,16): error CS0246: The type or namespace name 'FloorType' could not be found (are you missing a using directive or an assembly reference?)
32>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\SlabData.cs(49,26,49,31): error CS0246: The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)
32>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\SlabData.cs(51,12,51,16): error CS0246: The type or namespace name 'View' could not be found (are you missing a using directive or an assembly reference?)
32>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\SlabData.cs(53,12,53,17): error CS0246: The type or namespace name 'Floor' could not be found (are you missing a using directive or an assembly reference?)
32>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\SlabData.cs(61,12,61,21): error CS0246: The type or namespace name 'FloorType' could not be found (are you missing a using directive or an assembly reference?)
32>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\RegularSlab.cs(84,16,84,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
32>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\RegularSlab.cs(92,16,92,26): error CS0246: The type or namespace name 'CurveArray' could not be found (are you missing a using directive or an assembly reference?)
32>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\RegularSlab.cs(100,16,100,26): error CS0246: The type or namespace name 'CurveArray' could not be found (are you missing a using directive or an assembly reference?)
32>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\RegularSlab.cs(108,16,108,30): error CS0246: The type or namespace name 'BoundingBoxXYZ' could not be found (are you missing a using directive or an assembly reference?)
32>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\RegularSlab.cs(150,43,150,51): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
32>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\RegularSlab.cs(150,70,150,78): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
32>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\RegularSlab.cs(119,28,119,33): error CS0246: The type or namespace name 'Floor' could not be found (are you missing a using directive or an assembly reference?)
32>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\RegularSlab.cs(119,41,119,51): error CS0246: The type or namespace name 'CurveArray' could not be found (are you missing a using directive or an assembly reference?)
32>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\RegularSlab.cs(119,66,119,80): error CS0246: The type or namespace name 'BoundingBoxXYZ' could not be found (are you missing a using directive or an assembly reference?)
32>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\RegularSlab.cs(40,9,40,14): error CS0246: The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)
32>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\RegularSlab.cs(41,9,41,20): error CS0246: The type or namespace name 'ElementType' could not be found (are you missing a using directive or an assembly reference?)
32>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\RegularSlab.cs(43,9,43,17): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
32>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\RegularSlab.cs(44,9,44,19): error CS0246: The type or namespace name 'CurveArray' could not be found (are you missing a using directive or an assembly reference?)
32>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\RegularSlab.cs(45,9,45,19): error CS0246: The type or namespace name 'CurveArray' could not be found (are you missing a using directive or an assembly reference?)
32>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\RegularSlab.cs(46,9,46,23): error CS0246: The type or namespace name 'BoundingBoxXYZ' could not be found (are you missing a using directive or an assembly reference?)
32>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FoundationSlab\CS\Sketch.cs(90,65,90,75): error CS0246: The type or namespace name 'CurveArray' could not be found (are you missing a using directive or an assembly reference?)
33>------ Rebuild All started: Project: GenerateFloor, Configuration: Debug Any CPU ------
34>------ Rebuild All started: Project: InPlaceMembers, Configuration: Debug Any CPU ------
33>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
33>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
33>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
33>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenerateFloor\CS\Data.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
33>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenerateFloor\CS\Data.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
33>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenerateFloor\CS\Data.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
33>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenerateFloor\CS\Command.cs(25,7,25,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
33>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenerateFloor\CS\Command.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
33>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenerateFloor\CS\Command.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
33>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenerateFloor\CS\Data.cs(57,14,57,23): error CS0246: The type or namespace name 'FloorType' could not be found (are you missing a using directive or an assembly reference?)
33>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenerateFloor\CS\Data.cs(72,14,72,19): error CS0246: The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)
33>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenerateFloor\CS\Data.cs(87,14,87,24): error CS0246: The type or namespace name 'CurveArray' could not be found (are you missing a using directive or an assembly reference?)
33>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenerateFloor\CS\Data.cs(165,30,165,49): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
33>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenerateFloor\CS\Data.cs(204,37,204,60): error CS0246: The type or namespace name 'FilteredElementIterator' could not be found (are you missing a using directive or an assembly reference?)
33>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenerateFloor\CS\Data.cs(229,32,229,42): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
33>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenerateFloor\CS\Data.cs(252,34,252,44): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
33>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenerateFloor\CS\Data.cs(305,38,305,46): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
33>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenerateFloor\CS\Data.cs(330,44,330,54): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
33>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenerateFloor\CS\Data.cs(330,22,330,32): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
33>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenerateFloor\CS\Data.cs(354,31,354,41): error CS0246: The type or namespace name 'CurveArray' could not be found (are you missing a using directive or an assembly reference?)
33>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenerateFloor\CS\Data.cs(394,29,394,39): error CS0246: The type or namespace name 'CurveArray' could not be found (are you missing a using directive or an assembly reference?)
33>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenerateFloor\CS\Data.cs(394,49,394,57): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
33>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenerateFloor\CS\Data.cs(394,82,394,87): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
33>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenerateFloor\CS\Data.cs(394,15,394,20): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
33>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenerateFloor\CS\Data.cs(44,15,44,24): error CS0246: The type or namespace name 'FloorType' could not be found (are you missing a using directive or an assembly reference?)
33>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenerateFloor\CS\Data.cs(45,15,45,20): error CS0246: The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)
33>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenerateFloor\CS\Data.cs(46,15,46,25): error CS0246: The type or namespace name 'CurveArray' could not be found (are you missing a using directive or an assembly reference?)
33>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenerateFloor\CS\Data.cs(51,15,51,23): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
33>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenerateFloor\CS\Data.cs(52,15,52,23): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
33>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenerateFloor\CS\Command.cs(37,28,37,44): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
33>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenerateFloor\CS\Command.cs(34,6,34,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
33>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenerateFloor\CS\Command.cs(35,6,35,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
33>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenerateFloor\CS\Command.cs(36,6,36,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
33>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenerateFloor\CS\Command.cs(34,44,34,52): error CS0103: The name 'Autodesk' does not exist in the current context
33>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenerateFloor\CS\Command.cs(35,45,35,53): error CS0103: The name 'Autodesk' does not exist in the current context
33>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenerateFloor\CS\Command.cs(36,43,36,51): error CS0103: The name 'Autodesk' does not exist in the current context
33>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenerateFloor\CS\Command.cs(56,49,56,57): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
33>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenerateFloor\CS\Command.cs(57,33,57,41): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
33>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenerateFloor\CS\Command.cs(56,16,56,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
33>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenerateFloor\CS\Command.cs(102,51,102,59): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
35>------ Rebuild All started: Project: InvisibleParam, Configuration: Debug Any CPU ------
34>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
34>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
34>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
34>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InPlaceMembers\CS\GraphicsData.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
34>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InPlaceMembers\CS\GraphicsData.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
34>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InPlaceMembers\CS\GraphicsDataFactory.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
34>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InPlaceMembers\CS\GraphicsDataFactory.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
34>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InPlaceMembers\CS\Command.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
34>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InPlaceMembers\CS\Command.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
34>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InPlaceMembers\CS\Command.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
34>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InPlaceMembers\CS\Command.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
34>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InPlaceMembers\CS\Properties.cs(25,7,25,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
34>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InPlaceMembers\CS\GraphicsData.cs(73,19,73,27): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
34>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InPlaceMembers\CS\GraphicsData.cs(78,19,78,27): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
34>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InPlaceMembers\CS\GraphicsData.cs(83,19,83,27): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
34>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InPlaceMembers\CS\GraphicsData.cs(88,19,88,27): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
34>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InPlaceMembers\CS\GraphicsData.cs(302,38,302,41): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
34>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InPlaceMembers\CS\GraphicsData.cs(338,39,338,42): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
34>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InPlaceMembers\CS\GraphicsData.cs(354,36,354,39): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
34>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InPlaceMembers\CS\GraphicsData.cs(354,17,354,20): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
34>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InPlaceMembers\CS\GraphicsData.cs(362,36,362,39): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
34>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InPlaceMembers\CS\GraphicsData.cs(362,17,362,20): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
34>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InPlaceMembers\CS\GraphicsData.cs(376,54,376,62): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
34>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InPlaceMembers\CS\GraphicsData.cs(376,17,376,25): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
34>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InPlaceMembers\CS\GraphicsData.cs(394,52,394,60): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
34>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InPlaceMembers\CS\GraphicsData.cs(394,17,394,25): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
34>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InPlaceMembers\CS\GraphicsData.cs(270,19,270,22): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
34>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InPlaceMembers\CS\GraphicsData.cs(271,19,271,22): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
34>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InPlaceMembers\CS\GraphicsDataFactory.cs(46,55,46,70): error CS0246: The type or namespace name 'AnalyticalModel' could not be found (are you missing a using directive or an assembly reference?)
34>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InPlaceMembers\CS\Command.cs(43,28,43,44): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
34>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InPlaceMembers\CS\Command.cs(40,6,40,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
34>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InPlaceMembers\CS\Command.cs(41,6,41,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
34>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InPlaceMembers\CS\Command.cs(42,6,42,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
34>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InPlaceMembers\CS\Command.cs(40,44,40,52): error CS0103: The name 'Autodesk' does not exist in the current context
34>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InPlaceMembers\CS\Command.cs(41,45,41,53): error CS0103: The name 'Autodesk' does not exist in the current context
34>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InPlaceMembers\CS\Command.cs(42,43,42,51): error CS0103: The name 'Autodesk' does not exist in the current context
34>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InPlaceMembers\CS\Command.cs(63,49,63,68): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
34>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InPlaceMembers\CS\Command.cs(64,33,64,41): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
34>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InPlaceMembers\CS\Command.cs(63,16,63,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
34>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InPlaceMembers\CS\Command.cs(108,38,108,52): error CS0246: The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)
34>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InPlaceMembers\CS\Command.cs(108,72,108,87): error CS0246: The type or namespace name 'AnalyticalModel' could not be found (are you missing a using directive or an assembly reference?)
34>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InPlaceMembers\CS\Command.cs(45,16,45,35): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
34>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InPlaceMembers\CS\Properties.cs(131,27,131,41): error CS0246: The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)
36>------ Rebuild All started: Project: Journaling, Configuration: Debug Any CPU ------
35>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
35>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
35>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
35>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InvisibleParam\CS\Command.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
35>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InvisibleParam\CS\Command.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
35>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InvisibleParam\CS\Command.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
35>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InvisibleParam\CS\Command.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
35>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InvisibleParam\CS\Command.cs(43,28,43,44): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
35>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InvisibleParam\CS\Command.cs(40,6,40,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
35>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InvisibleParam\CS\Command.cs(41,6,41,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
35>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InvisibleParam\CS\Command.cs(42,6,42,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
35>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InvisibleParam\CS\Command.cs(40,44,40,52): error CS0103: The name 'Autodesk' does not exist in the current context
35>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InvisibleParam\CS\Command.cs(41,45,41,53): error CS0103: The name 'Autodesk' does not exist in the current context
35>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InvisibleParam\CS\Command.cs(42,43,42,51): error CS0103: The name 'Autodesk' does not exist in the current context
35>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InvisibleParam\CS\Command.cs(64,13,64,32): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
35>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InvisibleParam\CS\Command.cs(64,66,64,74): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
35>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\InvisibleParam\CS\Command.cs(63,16,63,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
37>------ Rebuild All started: Project: LevelsProperty, Configuration: Debug Any CPU ------
36>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
36>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
36>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
36>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Journaling\CS\Command.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
36>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Journaling\CS\Command.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
36>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Journaling\CS\Command.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
36>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Journaling\CS\Journaling.cs(35,18,35,26): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
36>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Journaling\CS\Journaling.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
36>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Journaling\CS\Journaling.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
36>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Journaling\CS\Journaling.cs(34,7,34,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
36>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Journaling\CS\JournalingForm.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
36>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Journaling\CS\JournalingForm.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
36>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Journaling\CS\PointUserControl.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
36>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Journaling\CS\PointUserControl.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
36>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Journaling\CS\Command.cs(40,28,40,44): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
36>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Journaling\CS\Command.cs(37,6,37,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
36>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Journaling\CS\Command.cs(38,6,38,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
36>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Journaling\CS\Command.cs(39,6,39,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
36>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Journaling\CS\Command.cs(37,44,37,52): error CS0103: The name 'Autodesk' does not exist in the current context
36>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Journaling\CS\Command.cs(38,45,38,53): error CS0103: The name 'Autodesk' does not exist in the current context
36>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Journaling\CS\Command.cs(39,43,39,51): error CS0103: The name 'Autodesk' does not exist in the current context
36>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Journaling\CS\Command.cs(59,49,59,57): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
36>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Journaling\CS\Command.cs(61,48,61,58): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
36>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Journaling\CS\Command.cs(59,16,59,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
36>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Journaling\CS\Journaling.cs(69,35,69,40): error CS0246: The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)
36>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Journaling\CS\Journaling.cs(81,35,81,43): error CS0246: The type or namespace name 'WallType' could not be found (are you missing a using directive or an assembly reference?)
36>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Journaling\CS\Journaling.cs(141,38,141,46): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
36>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Journaling\CS\Journaling.cs(141,72,141,80): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
36>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Journaling\CS\Journaling.cs(141,104,141,109): error CS0246: The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)
36>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Journaling\CS\Journaling.cs(141,117,141,125): error CS0246: The type or namespace name 'WallType' could not be found (are you missing a using directive or an assembly reference?)
36>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Journaling\CS\Journaling.cs(307,24,307,32): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
36>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Journaling\CS\Journaling.cs(344,43,344,51): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
36>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Journaling\CS\Journaling.cs(95,27,95,46): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
36>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Journaling\CS\Journaling.cs(53,9,53,28): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
36>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Journaling\CS\Journaling.cs(56,9,56,17): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
36>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Journaling\CS\Journaling.cs(57,9,57,17): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
36>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Journaling\CS\Journaling.cs(58,9,58,14): error CS0246: The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)
36>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Journaling\CS\Journaling.cs(59,9,59,17): error CS0246: The type or namespace name 'WallType' could not be found (are you missing a using directive or an assembly reference?)
36>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Journaling\CS\Journaling.cs(61,14,61,19): error CS0246: The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)
36>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Journaling\CS\Journaling.cs(62,14,62,22): error CS0246: The type or namespace name 'WallType' could not be found (are you missing a using directive or an assembly reference?)
36>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Journaling\CS\Journaling.cs(44,44,44,52): error CS0246: The type or namespace name 'WallType' could not be found (are you missing a using directive or an assembly reference?)
36>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Journaling\CS\Journaling.cs(46,27,46,35): error CS0246: The type or namespace name 'WallType' could not be found (are you missing a using directive or an assembly reference?)
36>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Journaling\CS\Journaling.cs(46,45,46,53): error CS0246: The type or namespace name 'WallType' could not be found (are you missing a using directive or an assembly reference?)
36>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Journaling\CS\Journaling.cs(46,61,46,69): error CS0246: The type or namespace name 'WallType' could not be found (are you missing a using directive or an assembly reference?)
36>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Journaling\CS\PointUserControl.cs(63,16,63,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
38>------ Rebuild All started: Project: MaterialProperties (MaterialProperties\CS\MaterialProperties), Configuration: Debug Any CPU ------
37>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
37>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
37>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
37>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\LevelsProperty\CS\Command.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
37>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\LevelsProperty\CS\Command.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
37>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\LevelsProperty\CS\Command.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
37>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\LevelsProperty\CS\LevelsForm.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
37>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\LevelsProperty\CS\Unit.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
37>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\LevelsProperty\CS\Unit.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
37>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\LevelsProperty\CS\Command.cs(40,28,40,44): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
37>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\LevelsProperty\CS\Command.cs(37,6,37,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
37>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\LevelsProperty\CS\Command.cs(38,6,38,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
37>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\LevelsProperty\CS\Command.cs(39,6,39,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
37>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\LevelsProperty\CS\Command.cs(37,44,37,52): error CS0103: The name 'Autodesk' does not exist in the current context
37>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\LevelsProperty\CS\Command.cs(38,45,38,53): error CS0103: The name 'Autodesk' does not exist in the current context
37>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\LevelsProperty\CS\Command.cs(39,43,39,51): error CS0103: The name 'Autodesk' does not exist in the current context
37>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\LevelsProperty\CS\Command.cs(60,49,60,68): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
37>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\LevelsProperty\CS\Command.cs(60,96,60,104): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
37>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\LevelsProperty\CS\Command.cs(60,16,60,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
37>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\LevelsProperty\CS\Command.cs(105,9,105,28): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
37>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\LevelsProperty\CS\Command.cs(106,16,106,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
37>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\LevelsProperty\CS\Unit.cs(44,44,44,55): error CS0246: The type or namespace name 'ForgeTypeId' could not be found (are you missing a using directive or an assembly reference?)
37>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\LevelsProperty\CS\Unit.cs(55,56,55,67): error CS0246: The type or namespace name 'ForgeTypeId' could not be found (are you missing a using directive or an assembly reference?)
39>------ Rebuild All started: Project: MaterialProperties (MaterialProperties\VB.NET\MaterialProperties), Configuration: Debug Any CPU ------
38>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
38>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
38>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
38>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\CS\MaterialProperties.cs(35,18,35,26): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
38>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\CS\MaterialProperties.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
38>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\CS\MaterialProperties.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
38>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\CS\MaterialProperties.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
38>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\CS\MaterialProperties.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
38>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\CS\MaterialPropertiesForm.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
38>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\CS\MaterialPropertiesForm.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
38>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\CS\MaterialProperties.cs(47,39,47,47): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
38>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\CS\MaterialProperties.cs(44,6,44,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
38>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\CS\MaterialProperties.cs(45,6,45,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
38>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\CS\MaterialProperties.cs(46,6,46,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
38>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\CS\MaterialProperties.cs(44,44,44,52): error CS0103: The name 'Autodesk' does not exist in the current context
38>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\CS\MaterialProperties.cs(45,45,45,53): error CS0103: The name 'Autodesk' does not exist in the current context
38>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\CS\MaterialProperties.cs(46,43,46,51): error CS0103: The name 'Autodesk' does not exist in the current context
38>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\CS\MaterialProperties.cs(66,16,66,36): error CS0246: The type or namespace name 'StructuralAssetClass' could not be found (are you missing a using directive or an assembly reference?)
38>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\CS\MaterialProperties.cs(160,49,160,68): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
38>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\CS\MaterialProperties.cs(161,33,161,41): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
38>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\CS\MaterialProperties.cs(160,16,160,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
38>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\CS\MaterialProperties.cs(194,54,194,74): error CS0246: The type or namespace name 'StructuralAssetClass' could not be found (are you missing a using directive or an assembly reference?)
38>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\CS\MaterialProperties.cs(420,17,420,25): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
38>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\CS\MaterialProperties.cs(591,17,591,37): error CS0246: The type or namespace name 'StructuralAssetClass' could not be found (are you missing a using directive or an assembly reference?)
38>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\CS\MaterialProperties.cs(54,9,54,17): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
38>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\CS\MaterialProperties.cs(56,9,56,23): error CS0246: The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)
38>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\CS\MaterialProperties.cs(57,9,57,18): error CS0246: The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)
38>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\CS\MaterialProperties.cs(661,16,661,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
38>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\CS\MaterialProperties.cs(641,28,641,36): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
38>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\CS\MaterialProperties.cs(630,9,630,17): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
40>------ Rebuild All started: Project: ModelLines, Configuration: Debug Any CPU ------
39>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
39>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
39>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\VB.NET\MaterialProperties.vb(30,9): error BC40056: Namespace or type specified in the Imports 'Autodesk.Revit.DB' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.
39>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\VB.NET\MaterialProperties.vb(31,9): error BC40056: Namespace or type specified in the Imports 'Autodesk.Revit.UI' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.
39>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\VB.NET\MaterialProperties.vb(32,9): error BC40056: Namespace or type specified in the Imports 'Autodesk.Revit.DB.Structure' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.
39>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\VB.NET\MaterialProperties.vb(549,23): error BC30002: Type 'Autodesk.Revit.DB.Material' is not defined.
39>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\VB.NET\MaterialProperties.vb(555,38): error BC30002: Type 'Autodesk.Revit.DB.Material' is not defined.
39>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\VB.NET\MaterialProperties.vb(568,44): error BC30002: Type 'Autodesk.Revit.DB.Material' is not defined.
39>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\VB.NET\MaterialProperties.vb(59,20): error BC30002: Type 'Autodesk.Revit.UI.UIApplication' is not defined.
39>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\VB.NET\MaterialProperties.vb(64,32): error BC30002: Type 'Autodesk.Revit.DB.FamilyInstance' is not defined.
39>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\VB.NET\MaterialProperties.vb(67,30): error BC30002: Type 'Parameter' is not defined.
39>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\VB.NET\MaterialProperties.vb(75,39): error BC30002: Type 'StructuralAssetClass' is not defined.
39>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\VB.NET\MaterialProperties.vb(159,50): error BC30002: Type 'Autodesk.Revit.UI.ExternalCommandData' is not defined.
39>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\VB.NET\MaterialProperties.vb(161,23): error BC30002: Type 'Autodesk.Revit.DB.ElementSet' is not defined.
39>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\VB.NET\MaterialProperties.vb(162,5): error BC30002: Type 'Autodesk.Revit.UI.Result' is not defined.
39>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\VB.NET\MaterialProperties.vb(162,41): error BC30002: Type 'Autodesk.Revit.UI.IExternalCommand' is not defined.
39>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\VB.NET\MaterialProperties.vb(189,27): error BC30002: Type 'StructuralAssetClass' is not defined.
39>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\VB.NET\MaterialProperties.vb(367,46): error BC30002: Type 'Autodesk.Revit.DB.Material' is not defined.
39>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\VB.NET\MaterialProperties.vb(514,55): error BC30002: Type 'Autodesk.Revit.DB.Material' is not defined.
39>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\VB.NET\MaterialProperties.vb(514,86): error BC30002: Type 'StructuralAssetClass' is not defined.
39>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\VB.NET\MaterialProperties.vb(48,16): error BC30002: Type 'Autodesk.Revit.UI.IExternalCommand' is not defined.
39>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\VB.NET\MaterialProperties.vb(44,2): error BC30002: Type 'Autodesk.Revit.Attributes.Transaction' is not defined.
39>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\VB.NET\MaterialProperties.vb(45,2): error BC30002: Type 'Autodesk.Revit.Attributes.Regeneration' is not defined.
39>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\VB.NET\MaterialProperties.vb(46,2): error BC30002: Type 'Autodesk.Revit.Attributes.Journaling' is not defined.
39>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\VB.NET\MaterialProperties.vb(44,40): error BC30451: 'Autodesk' is not declared. It may be inaccessible due to its protection level.
39>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\VB.NET\MaterialProperties.vb(45,41): error BC30451: 'Autodesk' is not declared. It may be inaccessible due to its protection level.
39>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\VB.NET\MaterialProperties.vb(46,39): error BC30451: 'Autodesk' is not declared. It may be inaccessible due to its protection level.
39>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialProperties\VB.NET\MaterialPropertiesForm.vb(29,9): error BC40056: Namespace or type specified in the Imports 'Autodesk.Revit.DB' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.
41>------ Rebuild All started: Project: MoveLinear, Configuration: Debug Any CPU ------
40>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
40>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
40>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
40>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelLines\CS\Command.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
40>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelLines\CS\Command.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
40>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelLines\CS\Command.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
40>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelLines\CS\Information.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
40>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelLines\CS\Information.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
40>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelLines\CS\ModelLines.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
40>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelLines\CS\ModelLines.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
40>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelLines\CS\ModelLinesForm.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
40>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelLines\CS\PointUserControl.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
40>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelLines\CS\SketchPlaneForm.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
40>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelLines\CS\SketchPlaneForm.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
40>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelLines\CS\Command.cs(39,28,39,44): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
40>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelLines\CS\Command.cs(36,6,36,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
40>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelLines\CS\Command.cs(37,6,37,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
40>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelLines\CS\Command.cs(38,6,38,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
40>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelLines\CS\Command.cs(36,44,36,52): error CS0103: The name 'Autodesk' does not exist in the current context
40>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelLines\CS\Command.cs(37,45,37,53): error CS0103: The name 'Autodesk' does not exist in the current context
40>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelLines\CS\Command.cs(38,43,38,51): error CS0103: The name 'Autodesk' does not exist in the current context
40>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelLines\CS\Command.cs(57,49,57,57): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
40>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelLines\CS\Command.cs(59,48,59,58): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
40>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelLines\CS\Command.cs(57,16,57,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
40>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelLines\CS\ModelLines.cs(208,37,208,45): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
40>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelLines\CS\ModelLines.cs(208,67,208,75): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
40>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelLines\CS\ModelLines.cs(241,44,241,52): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
40>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelLines\CS\ModelLines.cs(241,78,241,86): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
40>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelLines\CS\ModelLines.cs(287,43,287,51): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
40>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelLines\CS\ModelLines.cs(287,77,287,85): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
40>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelLines\CS\ModelLines.cs(287,109,287,117): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
40>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelLines\CS\ModelLines.cs(332,61,332,69): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
40>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelLines\CS\ModelLines.cs(505,7,505,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
40>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelLines\CS\ModelLines.cs(520,7,520,18): error CS0246: The type or namespace name 'SketchPlane' could not be found (are you missing a using directive or an assembly reference?)
40>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelLines\CS\ModelLines.cs(159,25,159,33): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
40>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelLines\CS\ModelLines.cs(42,7,42,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
40>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelLines\CS\ModelLines.cs(43,7,43,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
40>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelLines\CS\ModelLines.cs(44,7,44,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
40>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelLines\CS\ModelLines.cs(46,7,46,22): error CS0246: The type or namespace name 'ModelCurveArray' could not be found (are you missing a using directive or an assembly reference?)
40>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelLines\CS\ModelLines.cs(47,7,47,22): error CS0246: The type or namespace name 'ModelCurveArray' could not be found (are you missing a using directive or an assembly reference?)
40>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelLines\CS\ModelLines.cs(48,7,48,22): error CS0246: The type or namespace name 'ModelCurveArray' could not be found (are you missing a using directive or an assembly reference?)
40>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelLines\CS\ModelLines.cs(49,7,49,22): error CS0246: The type or namespace name 'ModelCurveArray' could not be found (are you missing a using directive or an assembly reference?)
40>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelLines\CS\ModelLines.cs(50,7,50,22): error CS0246: The type or namespace name 'ModelCurveArray' could not be found (are you missing a using directive or an assembly reference?)
40>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelLines\CS\ModelLines.cs(51,12,51,23): error CS0246: The type or namespace name 'SketchPlane' could not be found (are you missing a using directive or an assembly reference?)
40>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelLines\CS\PointUserControl.cs(66,16,66,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
41>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
41>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
41>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
41>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MoveLinear\CS\Command.cs(25,7,25,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
41>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MoveLinear\CS\Command.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
41>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MoveLinear\CS\Command.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
41>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MoveLinear\CS\Command.cs(37,28,37,36): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
41>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MoveLinear\CS\Command.cs(34,6,34,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
41>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MoveLinear\CS\Command.cs(35,6,35,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
41>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MoveLinear\CS\Command.cs(36,6,36,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
41>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MoveLinear\CS\Command.cs(34,44,34,52): error CS0103: The name 'Autodesk' does not exist in the current context
41>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MoveLinear\CS\Command.cs(35,45,35,53): error CS0103: The name 'Autodesk' does not exist in the current context
41>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MoveLinear\CS\Command.cs(36,43,36,51): error CS0103: The name 'Autodesk' does not exist in the current context
41>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MoveLinear\CS\Command.cs(56,49,56,68): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
41>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MoveLinear\CS\Command.cs(56,94,56,104): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
41>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MoveLinear\CS\Command.cs(56,16,56,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
42>------ Rebuild All started: Project: NewPathReinforcement, Configuration: Debug Any CPU ------
43>------ Rebuild All started: Project: ObjectViewer, Configuration: Debug Any CPU ------
43>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
43>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
43>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\Command.cs(33,25,33,33): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\Command.cs(32,17,32,25): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\Command.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\Command.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\Command.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\Command.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\GeometryData.cs(32,25,32,33): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\GeometryData.cs(31,17,31,25): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\GeometryData.cs(33,25,33,33): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\GeometryData.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\GeometryData.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\Graphics2DData.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\Graphics3DData.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\Graphics3DData.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\MathUtil.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\MathUtil.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\ModelData.cs(34,17,34,25): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\ModelData.cs(36,22,36,30): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\ModelData.cs(35,21,35,29): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\ModelData.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\ModelData.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\ModelData.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\Para.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\Para.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\ParasFactory.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\ParasFactory.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\ParasFactory.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\Sketch.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\ObjectViewer.cs(35,29,35,37): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\ObjectViewer.cs(34,21,34,29): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\ObjectViewer.cs(29,11,29,19): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\ObjectViewer.cs(30,11,30,19): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\ObjectViewer.cs(31,11,31,19): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\ObjectViewer.cs(32,11,32,19): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\ObjectViewerForm.cs(34,11,34,19): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\Command.cs(43,28,43,44): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\Command.cs(40,6,40,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\Command.cs(41,6,41,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\Command.cs(42,6,42,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\Command.cs(40,44,40,52): error CS0103: The name 'Autodesk' does not exist in the current context
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\Command.cs(41,45,41,53): error CS0103: The name 'Autodesk' does not exist in the current context
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\Command.cs(42,43,42,51): error CS0103: The name 'Autodesk' does not exist in the current context
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\Command.cs(51,23,51,42): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\Command.cs(75,49,75,68): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\Command.cs(76,29,76,37): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\Command.cs(75,16,75,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\Command.cs(46,24,46,43): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\GeometryData.cs(103,34,103,48): error CS0246: The type or namespace name 'GeometryObject' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\GeometryData.cs(103,54,103,63): error CS0246: The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\GeometryData.cs(122,51,122,65): error CS0246: The type or namespace name 'GeometryObject' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\GeometryData.cs(122,76,122,85): error CS0246: The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\GeometryData.cs(170,29,170,43): error CS0246: The type or namespace name 'GeometryObject' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\GeometryData.cs(170,49,170,58): error CS0246: The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\GeometryData.cs(196,28,196,42): error CS0246: The type or namespace name 'GeometryObject' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\GeometryData.cs(196,48,196,57): error CS0246: The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\GeometryData.cs(217,31,217,45): error CS0246: The type or namespace name 'GeometryObject' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\GeometryData.cs(217,51,217,60): error CS0246: The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\GeometryData.cs(236,28,236,42): error CS0246: The type or namespace name 'GeometryObject' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\GeometryData.cs(236,48,236,57): error CS0246: The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\GeometryData.cs(272,29,272,43): error CS0246: The type or namespace name 'GeometryObject' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\GeometryData.cs(272,49,272,58): error CS0246: The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\GeometryData.cs(298,32,298,46): error CS0246: The type or namespace name 'GeometryObject' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\GeometryData.cs(298,52,298,61): error CS0246: The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\GeometryData.cs(325,28,325,42): error CS0246: The type or namespace name 'GeometryObject' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\GeometryData.cs(325,48,325,57): error CS0246: The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\GeometryData.cs(349,38,349,47): error CS0246: The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\GeometryData.cs(349,55,349,64): error CS0246: The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\GeometryData.cs(349,15,349,24): error CS0246: The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\GeometryData.cs(65,41,65,56): error CS0246: The type or namespace name 'ViewDetailLevel' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\GeometryData.cs(65,65,65,69): error CS0246: The type or namespace name 'View' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\GeometryData.cs(84,41,84,45): error CS0246: The type or namespace name 'View' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\GeometryData.cs(44,15,44,29): error CS0246: The type or namespace name 'BoundingBoxXYZ' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\GeometryData.cs(46,25,46,28): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\Graphics2DData.cs(103,41,103,43): error CS0246: The type or namespace name 'UV' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\Graphics3DData.cs(205,16,205,30): error CS0246: The type or namespace name 'BoundingBoxXYZ' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\Graphics3DData.cs(337,37,337,51): error CS0246: The type or namespace name 'BoundingBoxXYZ' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\Graphics3DData.cs(349,39,349,53): error CS0246: The type or namespace name 'BoundingBoxXYZ' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\Graphics3DData.cs(218,41,218,44): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\Graphics3DData.cs(218,55,218,69): error CS0246: The type or namespace name 'BoundingBoxXYZ' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\ObjectViewer.cs(91,16,91,20): error CS0246: The type or namespace name 'View' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\ObjectViewer.cs(108,35,108,39): error CS0246: The type or namespace name 'View' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\ObjectViewer.cs(119,16,119,31): error CS0246: The type or namespace name 'ViewDetailLevel' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\ObjectViewer.cs(59,17,59,21): error CS0246: The type or namespace name 'View' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\ObjectViewer.cs(61,17,61,32): error CS0246: The type or namespace name 'ViewDetailLevel' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\ObjectViewer.cs(62,22,62,26): error CS0246: The type or namespace name 'View' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\Para.cs(93,48,93,57): error CS0246: The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\Para.cs(122,46,122,55): error CS0246: The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\Para.cs(159,21,159,30): error CS0246: The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\Para.cs(39,17,39,26): error CS0246: The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\ParasFactory.cs(49,29,49,36): error CS0246: The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\ParasFactory.cs(41,17,41,24): error CS0246: The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\Sketch.cs(391,44,391,58): error CS0246: The type or namespace name 'BoundingBoxXYZ' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\Graphics3DData.cs(96,17,96,31): error CS0246: The type or namespace name 'BoundingBoxXYZ' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\MathUtil.cs(45,58,45,66): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\MathUtil.cs(45,86,45,94): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\MathUtil.cs(45,23,45,31): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\MathUtil.cs(96,52,96,60): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\MathUtil.cs(96,79,96,87): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\MathUtil.cs(96,23,96,31): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\MathUtil.cs(112,52,112,60): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\MathUtil.cs(112,79,112,87): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\MathUtil.cs(112,23,112,31): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\MathUtil.cs(128,55,128,63): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\MathUtil.cs(128,23,128,31): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\MathUtil.cs(139,54,139,62): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\MathUtil.cs(139,83,139,92): error CS0246: The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\MathUtil.cs(139,23,139,31): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\MathUtil.cs(168,23,168,31): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\MathUtil.cs(178,41,178,49): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\ModelData.cs(104,17,104,32): error CS0246: The type or namespace name 'AnalyticalModel' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\ModelData.cs(114,35,114,50): error CS0246: The type or namespace name 'AnalyticalModel' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\ModelData.cs(46,17,46,31): error CS0246: The type or namespace name 'BoundingBoxXYZ' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\ModelData.cs(47,27,47,30): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
43>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ObjectViewer\CS\ModelData.cs(48,27,48,29): error CS0246: The type or namespace name 'UV' could not be found (are you missing a using directive or an assembly reference?)
44>------ Rebuild All started: Project: ProjectInfo, Configuration: Debug Any CPU ------
42>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
42>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
42>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
42>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\Command.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
42>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\Command.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
42>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\Command.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
42>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\Command.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
42>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\MathTools.cs(25,7,25,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
42>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\NewPathReinforcementForm.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
42>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\NewPathReinforcementForm.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
42>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\NewPathReinforcementForm.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
42>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\Profile.cs(25,7,25,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
42>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\Profile.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
42>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\Profile.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
42>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\Profile.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
42>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\ProfileFloor.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
42>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\ProfileFloor.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
42>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\ProfileFloor.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
42>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\ProfileFloor.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
42>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\ProfileWall.cs(25,7,25,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
42>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\ProfileWall.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
42>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\ProfileWall.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
42>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\ProfileWall.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
42>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\Command.cs(42,28,42,44): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
42>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\Command.cs(39,6,39,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
42>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\Command.cs(40,6,40,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
42>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\Command.cs(41,6,41,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
42>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\Command.cs(39,44,39,52): error CS0103: The name 'Autodesk' does not exist in the current context
42>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\Command.cs(40,45,40,53): error CS0103: The name 'Autodesk' does not exist in the current context
42>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\Command.cs(41,43,41,51): error CS0103: The name 'Autodesk' does not exist in the current context
42>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\Command.cs(61,49,61,68): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
42>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\Command.cs(62,33,62,41): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
42>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\Command.cs(61,16,61,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
42>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\MathTools.cs(114,24,114,32): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
42>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\NewPathReinforcementForm.cs(325,45,325,62): error CS0246: The type or namespace name 'PathReinforcement' could not be found (are you missing a using directive or an assembly reference?)
42>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\NewPathReinforcementForm.cs(325,27,325,30): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
42>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\NewPathReinforcementForm.cs(358,88,358,91): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
42>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\NewPathReinforcementForm.cs(52,27,52,30): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
42>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\Profile.cs(70,14,70,22): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
42>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\Profile.cs(106,23,106,40): error CS0246: The type or namespace name 'PathReinforcement' could not be found (are you missing a using directive or an assembly reference?)
42>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\Profile.cs(113,63,113,67): error CS0246: The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)
42>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\Profile.cs(113,33,113,36): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
42>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\Profile.cs(153,40,153,48): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
42>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\Profile.cs(153,24,153,28): error CS0246: The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)
42>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\ProfileWall.cs(61,65,61,69): error CS0246: The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)
42>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\ProfileWall.cs(61,35,61,38): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
42>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\ProfileWall.cs(153,25,153,42): error CS0246: The type or namespace name 'PathReinforcement' could not be found (are you missing a using directive or an assembly reference?)
42>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\Profile.cs(195,41,195,45): error CS0246: The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)
42>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\ProfileWall.cs(47,28,47,32): error CS0246: The type or namespace name 'Wall' could not be found (are you missing a using directive or an assembly reference?)
42>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\ProfileWall.cs(47,39,47,58): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
42>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\Profile.cs(93,25,93,44): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
42>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\ProfileWall.cs(40,17,40,21): error CS0246: The type or namespace name 'Wall' could not be found (are you missing a using directive or an assembly reference?)
42>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\Profile.cs(44,27,44,30): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
42>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\Profile.cs(49,17,49,25): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
42>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\Profile.cs(54,17,54,25): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
42>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\Profile.cs(59,17,59,25): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
42>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\ProfileFloor.cs(62,65,62,69): error CS0246: The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)
42>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\ProfileFloor.cs(62,35,62,38): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
42>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\ProfileFloor.cs(106,25,106,42): error CS0246: The type or namespace name 'PathReinforcement' could not be found (are you missing a using directive or an assembly reference?)
42>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\ProfileFloor.cs(48,29,48,34): error CS0246: The type or namespace name 'Floor' could not be found (are you missing a using directive or an assembly reference?)
42>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\ProfileFloor.cs(48,42,48,61): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
42>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewPathReinforcement\CS\ProfileFloor.cs(41,17,41,22): error CS0246: The type or namespace name 'Floor' could not be found (are you missing a using directive or an assembly reference?)
45>------ Rebuild All started: Project: ReferencePlane, Configuration: Debug Any CPU ------
44>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
44>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
44>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
44>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Command.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
44>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Command.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
44>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Command.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
44>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Command.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
44>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Command.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
44>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Converters\ConstructionWrapperConverter.cs(5,26,5,34): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
44>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Converters\ConstructionWrapperConverter.cs(4,7,4,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
44>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Converters\ElementIdConverter.cs(4,7,4,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
44>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Converters\CityConverter.cs(4,7,4,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
44>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Wrappers\ConstructionWrapper.cs(3,7,3,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
44>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Converters\Converters.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
44>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Wrappers\EnergyDataSettingsWrapper.cs(3,7,3,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
44>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Wrappers\EnergyDataSettingsWrapper.cs(4,7,4,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
44>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Wrappers\EnergyDataSettingsWrapper.cs(5,7,5,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
44>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Wrappers\EnergyDataSettingsWrapper.cs(6,7,6,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
44>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Wrappers\MEPBuildingConstructionWrapper.cs(5,26,5,34): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
44>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Wrappers\MEPBuildingConstructionWrapper.cs(3,7,3,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
44>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Wrappers\MEPBuildingConstructionWrapper.cs(4,7,4,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
44>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Wrappers\ProjectInfoWrapper.cs(3,7,3,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
44>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\RevitVersionAttribute.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
44>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Converters\ProjectLocationConverter.cs(4,7,4,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
44>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Wrappers\SiteLocationWrapper.cs(3,7,3,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
44>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Wrappers\Wrappers.cs(25,7,25,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
44>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Command.cs(40,28,40,44): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
44>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Command.cs(37,6,37,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
44>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Command.cs(38,6,38,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
44>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Command.cs(39,6,39,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
44>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Command.cs(37,44,37,52): error CS0103: The name 'Autodesk' does not exist in the current context
44>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Command.cs(38,45,38,53): error CS0103: The name 'Autodesk' does not exist in the current context
44>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Command.cs(39,43,39,51): error CS0103: The name 'Autodesk' does not exist in the current context
44>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Command.cs(60,31,60,50): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
44>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Command.cs(60,84,60,92): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
44>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Command.cs(60,16,60,22): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
44>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Command.cs(347,42,347,51): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
44>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Command.cs(347,23,347,30): error CS0246: The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)
44>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Command.cs(351,23,351,30): error CS0246: The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)
44>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Command.cs(113,23,113,34): error CS0246: The type or namespace name 'Application' could not be found (are you missing a using directive or an assembly reference?)
44>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Command.cs(118,23,118,31): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
44>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Command.cs(123,23,123,34): error CS0246: The type or namespace name 'ProductType' could not be found (are you missing a using directive or an assembly reference?)
44>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Converters\ElementIdConverter.cs(12,65,12,72): error CS0246: The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)
44>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Converters\CityConverter.cs(14,28,14,32): error CS0246: The type or namespace name 'City' could not be found (are you missing a using directive or an assembly reference?)
44>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Wrappers\ConstructionWrapper.cs(25,36,25,48): error CS0246: The type or namespace name 'Construction' could not be found (are you missing a using directive or an assembly reference?)
44>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Wrappers\ConstructionWrapper.cs(17,17,17,29): error CS0246: The type or namespace name 'Construction' could not be found (are you missing a using directive or an assembly reference?)
44>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Wrappers\EnergyDataSettingsWrapper.cs(45,16,45,33): error CS0246: The type or namespace name 'gbXMLBuildingType' could not be found (are you missing a using directive or an assembly reference?)
44>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Wrappers\EnergyDataSettingsWrapper.cs(62,16,62,25): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
44>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Wrappers\EnergyDataSettingsWrapper.cs(80,16,80,32): error CS0246: The type or namespace name 'gbXMLServiceType' could not be found (are you missing a using directive or an assembly reference?)
44>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Wrappers\EnergyDataSettingsWrapper.cs(115,16,115,41): error CS0246: The type or namespace name 'HVACLoadConstructionClass' could not be found (are you missing a using directive or an assembly reference?)
44>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Wrappers\EnergyDataSettingsWrapper.cs(132,16,132,25): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
44>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Wrappers\EnergyDataSettingsWrapper.cs(165,16,165,37): error CS0246: The type or namespace name 'gbXMLExportComplexity' could not be found (are you missing a using directive or an assembly reference?)
44>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Wrappers\EnergyDataSettingsWrapper.cs(200,16,200,39): error CS0246: The type or namespace name 'HVACLoadLoadsReportType' could not be found (are you missing a using directive or an assembly reference?)
44>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Wrappers\EnergyDataSettingsWrapper.cs(216,16,216,31): error CS0246: The type or namespace name 'ProjectLocation' could not be found (are you missing a using directive or an assembly reference?)
44>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Wrappers\EnergyDataSettingsWrapper.cs(31,42,31,50): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
44>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Wrappers\EnergyDataSettingsWrapper.cs(19,17,19,35): error CS0246: The type or namespace name 'EnergyDataSettings' could not be found (are you missing a using directive or an assembly reference?)
44>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Wrappers\EnergyDataSettingsWrapper.cs(23,17,23,25): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
44>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Wrappers\EnergyDataSettingsWrapper.cs(61,50,61,55): error CS0246: The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)
44>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\RevitVersionAttribute.cs(58,45,58,56): error CS0246: The type or namespace name 'ProductType' could not be found (are you missing a using directive or an assembly reference?)
44>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Wrappers\EnergyDataSettingsWrapper.cs(79,23,79,34): error CS0103: The name 'ProductType' does not exist in the current context
44>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Wrappers\EnergyDataSettingsWrapper.cs(95,130,95,141): error CS0103: The name 'ProductType' does not exist in the current context
44>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Wrappers\EnergyDataSettingsWrapper.cs(114,23,114,34): error CS0103: The name 'ProductType' does not exist in the current context
44>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Wrappers\EnergyDataSettingsWrapper.cs(131,50,131,55): error CS0246: The type or namespace name 'Phase' could not be found (are you missing a using directive or an assembly reference?)
44>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Wrappers\EnergyDataSettingsWrapper.cs(181,23,181,34): error CS0103: The name 'ProductType' does not exist in the current context
44>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Wrappers\EnergyDataSettingsWrapper.cs(199,23,199,34): error CS0103: The name 'ProductType' does not exist in the current context
44>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Wrappers\EnergyDataSettingsWrapper.cs(215,105,215,116): error CS0103: The name 'ProductType' does not exist in the current context
44>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Wrappers\EnergyDataSettingsWrapper.cs(215,122,215,133): error CS0103: The name 'ProductType' does not exist in the current context
44>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Wrappers\EnergyDataSettingsWrapper.cs(231,94,231,105): error CS0103: The name 'ProductType' does not exist in the current context
44>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Wrappers\EnergyDataSettingsWrapper.cs(231,111,231,122): error CS0103: The name 'ProductType' does not exist in the current context
44>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Wrappers\MEPBuildingConstructionWrapper.cs(231,28,231,40): error CS0246: The type or namespace name 'Construction' could not be found (are you missing a using directive or an assembly reference?)
44>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Wrappers\MEPBuildingConstructionWrapper.cs(26,47,26,70): error CS0246: The type or namespace name 'MEPBuildingConstruction' could not be found (are you missing a using directive or an assembly reference?)
44>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Wrappers\MEPBuildingConstructionWrapper.cs(18,17,18,40): error CS0246: The type or namespace name 'MEPBuildingConstruction' could not be found (are you missing a using directive or an assembly reference?)
44>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Wrappers\ProjectInfoWrapper.cs(24,35,24,43): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
44>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Wrappers\ProjectInfoWrapper.cs(16,17,16,25): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
44>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Wrappers\ProjectInfoWrapper.cs(36,23,36,34): error CS0103: The name 'ProductType' does not exist in the current context
44>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Wrappers\ProjectInfoWrapper.cs(36,40,36,51): error CS0103: The name 'ProductType' does not exist in the current context
44>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\RevitVersionAttribute.cs(47,35,47,46): error CS0246: The type or namespace name 'ProductType' could not be found (are you missing a using directive or an assembly reference?)
44>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\RevitVersionAttribute.cs(40,14,40,25): error CS0246: The type or namespace name 'ProductType' could not be found (are you missing a using directive or an assembly reference?)
44>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Converters\ProjectLocationConverter.cs(16,28,16,43): error CS0246: The type or namespace name 'ProjectLocation' could not be found (are you missing a using directive or an assembly reference?)
44>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Wrappers\SiteLocationWrapper.cs(81,16,81,20): error CS0246: The type or namespace name 'City' could not be found (are you missing a using directive or an assembly reference?)
44>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Wrappers\SiteLocationWrapper.cs(95,17,95,21): error CS0246: The type or namespace name 'City' could not be found (are you missing a using directive or an assembly reference?)
44>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Wrappers\SiteLocationWrapper.cs(24,36,24,48): error CS0246: The type or namespace name 'SiteLocation' could not be found (are you missing a using directive or an assembly reference?)
44>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ProjectInfo\CS\Wrappers\SiteLocationWrapper.cs(16,17,16,29): error CS0246: The type or namespace name 'SiteLocation' could not be found (are you missing a using directive or an assembly reference?)
46>------ Rebuild All started: Project: Reinforcement, Configuration: Debug Any CPU ------
45>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
45>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
45>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
45>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\Command.cs(24,7,24,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
45>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\Command.cs(25,7,25,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
45>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\Command.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
45>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\GeoHelper.cs(28,17,28,25): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
45>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\GeoHelper.cs(29,18,29,26): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
45>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\GeoHelper.cs(25,7,25,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
45>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\GeoHelper.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
45>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\ReferencePlaneMgr.cs(31,17,31,25): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
45>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\ReferencePlaneMgr.cs(32,18,32,26): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
45>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\ReferencePlaneMgr.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
45>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\ReferencePlaneMgr.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
45>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\ReferencePlaneMgr.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
45>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\Command.cs(36,28,36,44): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
45>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\Command.cs(33,6,33,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
45>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\Command.cs(34,6,34,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
45>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\Command.cs(35,6,35,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
45>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\Command.cs(33,44,33,52): error CS0103: The name 'Autodesk' does not exist in the current context
45>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\Command.cs(34,45,34,53): error CS0103: The name 'Autodesk' does not exist in the current context
45>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\Command.cs(35,43,35,51): error CS0103: The name 'Autodesk' does not exist in the current context
45>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\Command.cs(54,49,54,68): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
45>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\Command.cs(56,13,56,23): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
45>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\Command.cs(54,16,54,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
45>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\GeoHelper.cs(46,42,46,51): error CS0246: The type or namespace name 'FaceArray' could not be found (are you missing a using directive or an assembly reference?)
45>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\GeoHelper.cs(46,23,46,27): error CS0246: The type or namespace name 'Face' could not be found (are you missing a using directive or an assembly reference?)
45>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\GeoHelper.cs(91,39,91,43): error CS0246: The type or namespace name 'Mesh' could not be found (are you missing a using directive or an assembly reference?)
45>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\GeoHelper.cs(91,54,91,62): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
45>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\GeoHelper.cs(91,92,91,100): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
45>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\GeoHelper.cs(91,128,91,136): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
45>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\GeoHelper.cs(105,40,105,48): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
45>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\GeoHelper.cs(105,74,105,82): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
45>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\GeoHelper.cs(129,55,129,63): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
45>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\GeoHelper.cs(129,89,129,97): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
45>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\GeoHelper.cs(129,23,129,31): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
45>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\GeoHelper.cs(140,44,140,48): error CS0246: The type or namespace name 'Face' could not be found (are you missing a using directive or an assembly reference?)
45>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\GeoHelper.cs(161,44,161,48): error CS0246: The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)
45>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\GeoHelper.cs(190,35,190,43): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
45>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\GeoHelper.cs(190,66,190,74): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
45>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\ReferencePlaneMgr.cs(160,29,160,37): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
45>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\ReferencePlaneMgr.cs(237,31,237,35): error CS0246: The type or namespace name 'Wall' could not be found (are you missing a using directive or an assembly reference?)
45>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\ReferencePlaneMgr.cs(237,46,237,54): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
45>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\ReferencePlaneMgr.cs(237,83,237,91): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
45>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\ReferencePlaneMgr.cs(237,118,237,126): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
45>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\ReferencePlaneMgr.cs(296,31,296,36): error CS0246: The type or namespace name 'Floor' could not be found (are you missing a using directive or an assembly reference?)
45>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\ReferencePlaneMgr.cs(296,48,296,56): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
45>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\ReferencePlaneMgr.cs(296,85,296,93): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
45>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\ReferencePlaneMgr.cs(296,120,296,128): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
45>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\ReferencePlaneMgr.cs(68,32,68,51): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
45>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\ReferencePlaneMgr.cs(41,15,41,25): error CS0246: The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)
45>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReferencePlane\CS\ReferencePlaneMgr.cs(42,15,42,22): error CS0246: The type or namespace name 'Options' could not be found (are you missing a using directive or an assembly reference?)
47>------ Rebuild All started: Project: Rooms, Configuration: Debug Any CPU ------
47>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
47>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
47>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
47>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Rooms\CS\RoomInfoForm.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
47>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Rooms\CS\RoomInfoForm.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
47>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Rooms\CS\RoomInfoForm.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
47>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Rooms\CS\Command.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
47>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Rooms\CS\Command.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
47>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Rooms\CS\Command.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
47>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Rooms\CS\RoomsData.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
47>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Rooms\CS\RoomsData.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
47>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Rooms\CS\RoomsData.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
47>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Rooms\CS\RoomsData.cs(34,7,34,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
47>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Rooms\CS\RoomInfoForm.cs(69,54,69,58): error CS0246: The type or namespace name 'Room' could not be found (are you missing a using directive or an assembly reference?)
47>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Rooms\CS\Command.cs(43,28,43,44): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
47>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Rooms\CS\Command.cs(40,6,40,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
47>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Rooms\CS\Command.cs(41,6,41,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
47>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Rooms\CS\Command.cs(42,6,42,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
47>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Rooms\CS\Command.cs(40,44,40,52): error CS0103: The name 'Autodesk' does not exist in the current context
47>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Rooms\CS\Command.cs(41,45,41,53): error CS0103: The name 'Autodesk' does not exist in the current context
47>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Rooms\CS\Command.cs(42,43,42,51): error CS0103: The name 'Autodesk' does not exist in the current context
47>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Rooms\CS\Command.cs(61,49,61,57): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
47>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Rooms\CS\Command.cs(63,48,63,58): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
47>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Rooms\CS\Command.cs(61,16,61,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
47>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Rooms\CS\RoomsData.cs(125,35,125,39): error CS0246: The type or namespace name 'Room' could not be found (are you missing a using directive or an assembly reference?)
47>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Rooms\CS\RoomsData.cs(137,35,137,42): error CS0246: The type or namespace name 'RoomTag' could not be found (are you missing a using directive or an assembly reference?)
47>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Rooms\CS\RoomsData.cs(149,35,149,39): error CS0246: The type or namespace name 'Room' could not be found (are you missing a using directive or an assembly reference?)
47>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Rooms\CS\RoomsData.cs(161,35,161,39): error CS0246: The type or namespace name 'Room' could not be found (are you missing a using directive or an assembly reference?)
47>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Rooms\CS\RoomsData.cs(269,35,269,39): error CS0246: The type or namespace name 'Room' could not be found (are you missing a using directive or an assembly reference?)
47>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Rooms\CS\RoomsData.cs(269,46,269,62): error CS0246: The type or namespace name 'BuiltInParameter' could not be found (are you missing a using directive or an assembly reference?)
47>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Rooms\CS\RoomsData.cs(173,26,173,45): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
47>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Rooms\CS\RoomsData.cs(44,9,44,17): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
47>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Rooms\CS\RoomsData.cs(46,14,46,18): error CS0246: The type or namespace name 'Room' could not be found (are you missing a using directive or an assembly reference?)
47>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Rooms\CS\RoomsData.cs(47,14,47,21): error CS0246: The type or namespace name 'RoomTag' could not be found (are you missing a using directive or an assembly reference?)
47>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Rooms\CS\RoomsData.cs(48,14,48,18): error CS0246: The type or namespace name 'Room' could not be found (are you missing a using directive or an assembly reference?)
47>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Rooms\CS\RoomsData.cs(49,14,49,18): error CS0246: The type or namespace name 'Room' could not be found (are you missing a using directive or an assembly reference?)
48>------ Rebuild All started: Project: RoomSchedule, Configuration: Debug Any CPU ------
46>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
46>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
46>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\BeamFramReinMaker.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\BeamFramReinMaker.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\BeamFramReinMaker.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\BeamFramReinMaker.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\BeamFramReinMakerForm.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\BeamFramReinMakerForm.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\BeamFramReinMakerForm.cs(34,7,34,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\BeamGeometrySupport.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\BeamGeometrySupport.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\BeamGeometrySupport.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\ColumnFramReinMaker.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\ColumnFramReinMaker.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\ColumnFramReinMaker.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\ColumnFramReinMaker.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\ColumnFramReinMakerForm.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\ColumnFramReinMakerForm.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\ColumnFramReinMakerForm.cs(34,7,34,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\ColumnGeometrySupport.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\ColumnGeometrySupport.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\ColumnGeometrySupport.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\Command.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\Command.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\Command.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\FrameReinMakerFactory.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\FrameReinMakerFactory.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\FrameReinMakerFactory.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\FrameReinMakerFactory.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\FramReinMaker.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\FramReinMaker.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\FramReinMaker.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\FramReinMaker.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomData.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeometrySupport.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeometrySupport.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomUtil.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomUtil.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomUtil.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\ParameterUtil.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\ParameterUtil.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeometrySupport.cs(34,24,34,32): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeometrySupport.cs(35,10,35,18): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomUtil.cs(35,21,35,29): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomUtil.cs(34,24,34,32): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\BeamFramReinMaker.cs(64,14,64,26): error CS0246: The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\BeamFramReinMaker.cs(79,14,79,26): error CS0246: The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\BeamFramReinMaker.cs(94,14,94,26): error CS0246: The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\BeamFramReinMaker.cs(109,14,109,26): error CS0246: The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\BeamFramReinMaker.cs(162,14,162,27): error CS0246: The type or namespace name 'RebarHookType' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\BeamFramReinMaker.cs(177,14,177,27): error CS0246: The type or namespace name 'RebarHookType' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomData.cs(48,16,48,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\BeamFramReinMaker.cs(299,14,299,19): error CS0246: The type or namespace name 'Rebar' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomData.cs(63,22,63,27): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\BeamFramReinMaker.cs(333,15,333,35): error CS0246: The type or namespace name 'RebarHookOrientation' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\BeamFramReinMaker.cs(385,15,385,20): error CS0246: The type or namespace name 'Rebar' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\BeamFramReinMaker.cs(197,32,197,51): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\BeamFramReinMaker.cs(197,65,197,79): error CS0246: The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomData.cs(112,30,112,38): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomData.cs(112,66,112,71): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomData.cs(40,9,40,17): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\BeamFramReinMaker.cs(47,7,47,19): error CS0246: The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomData.cs(41,15,41,20): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\BeamFramReinMaker.cs(48,7,48,19): error CS0246: The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\BeamFramReinMaker.cs(49,7,49,19): error CS0246: The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\BeamFramReinMaker.cs(50,7,50,19): error CS0246: The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\BeamFramReinMaker.cs(52,7,52,20): error CS0246: The type or namespace name 'RebarHookType' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\BeamFramReinMaker.cs(53,7,53,20): error CS0246: The type or namespace name 'RebarHookType' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomData.cs(260,48,260,56): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomData.cs(262,23,262,31): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomData.cs(262,54,262,62): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomData.cs(262,83,262,91): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeometrySupport.cs(164,49,164,57): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeometrySupport.cs(164,17,164,25): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeometrySupport.cs(186,63,186,71): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeometrySupport.cs(186,22,186,30): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeometrySupport.cs(222,22,222,30): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeometrySupport.cs(253,36,253,41): error CS0246: The type or namespace name 'Solid' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeometrySupport.cs(281,40,281,45): error CS0246: The type or namespace name 'Solid' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeometrySupport.cs(281,15,281,19): error CS0246: The type or namespace name 'Face' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\BeamGeometrySupport.cs(230,16,230,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeometrySupport.cs(345,43,345,52): error CS0246: The type or namespace name 'EdgeArray' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeometrySupport.cs(345,20,345,24): error CS0246: The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\BeamGeometrySupport.cs(50,36,50,50): error CS0246: The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\BeamGeometrySupport.cs(50,60,50,67): error CS0246: The type or namespace name 'Options' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeometrySupport.cs(78,30,78,44): error CS0246: The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeometrySupport.cs(78,54,78,61): error CS0246: The type or namespace name 'Options' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeometrySupport.cs(46,17,46,22): error CS0246: The type or namespace name 'Solid' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeometrySupport.cs(51,17,51,21): error CS0246: The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeometrySupport.cs(56,17,56,25): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeometrySupport.cs(61,22,61,26): error CS0246: The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeometrySupport.cs(66,22,66,30): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeometrySupport.cs(71,17,71,26): error CS0246: The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\ColumnFramReinMaker.cs(61,14,61,26): error CS0246: The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\ColumnFramReinMaker.cs(76,14,76,26): error CS0246: The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\ColumnFramReinMaker.cs(91,14,91,26): error CS0246: The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\ColumnFramReinMaker.cs(163,14,163,27): error CS0246: The type or namespace name 'RebarHookType' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\ColumnFramReinMaker.cs(266,14,266,19): error CS0246: The type or namespace name 'Rebar' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\ColumnFramReinMaker.cs(297,14,297,19): error CS0246: The type or namespace name 'Rebar' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomUtil.cs(65,36,65,44): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomUtil.cs(65,65,65,73): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomUtil.cs(87,39,87,43): error CS0246: The type or namespace name 'Face' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomUtil.cs(87,50,87,54): error CS0246: The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomUtil.cs(88,49,88,58): error CS0246: The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomUtil.cs(88,70,88,79): error CS0246: The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\ColumnFramReinMaker.cs(183,34,183,53): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\ColumnFramReinMaker.cs(183,67,183,81): error CS0246: The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomUtil.cs(141,44,141,52): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomUtil.cs(141,76,141,84): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\ColumnFramReinMaker.cs(45,7,45,19): error CS0246: The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomUtil.cs(158,48,158,56): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomUtil.cs(158,80,158,88): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\ColumnFramReinMaker.cs(46,7,46,19): error CS0246: The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\ColumnFramReinMaker.cs(47,7,47,19): error CS0246: The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomUtil.cs(175,57,175,65): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomUtil.cs(175,83,175,91): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomUtil.cs(175,23,175,31): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\ColumnFramReinMaker.cs(48,7,48,20): error CS0246: The type or namespace name 'RebarHookType' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomUtil.cs(201,56,201,64): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomUtil.cs(201,23,201,31): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomUtil.cs(218,40,218,48): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomUtil.cs(232,52,232,60): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomUtil.cs(232,78,232,86): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomUtil.cs(232,23,232,31): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomUtil.cs(247,52,247,60): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomUtil.cs(247,78,247,86): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomUtil.cs(247,23,247,31): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomUtil.cs(262,60,262,68): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomUtil.cs(262,23,262,31): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomUtil.cs(277,60,277,68): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomUtil.cs(277,89,277,98): error CS0246: The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomUtil.cs(277,23,277,31): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomUtil.cs(305,57,305,65): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomUtil.cs(305,86,305,94): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomUtil.cs(305,23,305,31): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomUtil.cs(319,58,319,66): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomUtil.cs(319,90,319,98): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomUtil.cs(319,120,319,128): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomUtil.cs(319,23,319,43): error CS0246: The type or namespace name 'RebarHookOrientation' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomUtil.cs(347,41,347,49): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomUtil.cs(366,41,366,49): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\GeomUtil.cs(366,67,366,75): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\ParameterUtil.cs(46,39,46,46): error CS0246: The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\ParameterUtil.cs(80,39,80,46): error CS0246: The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\ParameterUtil.cs(111,39,111,46): error CS0246: The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\ParameterUtil.cs(142,39,142,46): error CS0246: The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\ParameterUtil.cs(142,82,142,90): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\ParameterUtil.cs(173,39,173,46): error CS0246: The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\ParameterUtil.cs(173,56,173,72): error CS0246: The type or namespace name 'BuiltInParameter' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\ParameterUtil.cs(203,39,203,46): error CS0246: The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\ParameterUtil.cs(203,56,203,72): error CS0246: The type or namespace name 'BuiltInParameter' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\ParameterUtil.cs(232,39,232,46): error CS0246: The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\ParameterUtil.cs(232,56,232,72): error CS0246: The type or namespace name 'BuiltInParameter' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\ParameterUtil.cs(261,39,261,46): error CS0246: The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\ParameterUtil.cs(262,11,262,27): error CS0246: The type or namespace name 'BuiltInParameter' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\ParameterUtil.cs(262,43,262,51): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\ParameterUtil.cs(289,40,289,49): error CS0246: The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\ParameterUtil.cs(308,45,308,57): error CS0246: The type or namespace name 'ParameterSet' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\ParameterUtil.cs(308,21,308,30): error CS0246: The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\FrameReinMakerFactory.cs(49,38,49,57): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\FrameReinMakerFactory.cs(42,9,42,28): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\ColumnGeometrySupport.cs(51,36,51,50): error CS0246: The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\ColumnGeometrySupport.cs(51,60,51,67): error CS0246: The type or namespace name 'Options' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\FrameReinMakerFactory.cs(43,9,43,23): error CS0246: The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\Command.cs(41,28,41,44): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\FramReinMaker.cs(80,22,80,34): error CS0246: The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\FramReinMaker.cs(91,22,91,35): error CS0246: The type or namespace name 'RebarHookType' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\FramReinMaker.cs(186,54,186,59): error CS0246: The type or namespace name 'Rebar' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\FramReinMaker.cs(208,37,208,49): error CS0246: The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\FramReinMaker.cs(208,61,208,74): error CS0246: The type or namespace name 'RebarHookType' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\FramReinMaker.cs(209,45,209,58): error CS0246: The type or namespace name 'RebarHookType' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\FramReinMaker.cs(210,45,210,65): error CS0246: The type or namespace name 'RebarHookOrientation' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\FramReinMaker.cs(210,79,210,99): error CS0246: The type or namespace name 'RebarHookOrientation' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\FramReinMaker.cs(208,19,208,24): error CS0246: The type or namespace name 'Rebar' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\FramReinMaker.cs(235,35,235,54): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\FramReinMaker.cs(251,36,251,55): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\Command.cs(38,6,38,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\Command.cs(39,6,39,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\Command.cs(40,6,40,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\Command.cs(38,44,38,52): error CS0103: The name 'Autodesk' does not exist in the current context
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\Command.cs(39,45,39,53): error CS0103: The name 'Autodesk' does not exist in the current context
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\Command.cs(40,43,40,51): error CS0103: The name 'Autodesk' does not exist in the current context
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\FramReinMaker.cs(160,33,160,52): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\FramReinMaker.cs(160,66,160,80): error CS0246: The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\FramReinMaker.cs(60,19,60,27): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\Command.cs(59,49,59,68): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\Command.cs(60,69,60,77): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\Command.cs(59,16,59,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\FramReinMaker.cs(65,19,65,33): error CS0246: The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\FramReinMaker.cs(70,24,70,36): error CS0246: The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)
46>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Reinforcement\CS\FramReinMaker.cs(75,24,75,37): error CS0246: The type or namespace name 'RebarHookType' could not be found (are you missing a using directive or an assembly reference?)
49>------ Rebuild All started: Project: RotateFramingObjects (RotateFramingObjects\CS\RotateFramingObjects), Configuration: Debug Any CPU ------
48>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
48>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
48>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
48>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\CtrlApplication.cs(25,7,25,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
48>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\CtrlApplication.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
48>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\CtrlApplication.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
48>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\EventsReactor.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
48>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\EventsReactor.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
48>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\EventsReactor.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
48>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\EventsReactor.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
48>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\RoomScheduleForm.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
48>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\RoomScheduleForm.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
48>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\RoomScheduleForm.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
48>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\RoomScheduleForm.cs(34,7,34,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
48>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\RoomScheduleForm.cs(35,7,35,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
48>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\Command.cs(25,7,25,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
48>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\Command.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
48>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\Command.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
48>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\RoomsData.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
48>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\RoomsData.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
48>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\RoomsData.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
48>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\CtrlApplication.cs(38,36,38,56): error CS0246: The type or namespace name 'IExternalApplication' could not be found (are you missing a using directive or an assembly reference?)
48>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\CtrlApplication.cs(35,6,35,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
48>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\CtrlApplication.cs(36,6,36,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
48>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\CtrlApplication.cs(37,6,37,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
48>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\CtrlApplication.cs(35,44,35,52): error CS0103: The name 'Autodesk' does not exist in the current context
48>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\CtrlApplication.cs(36,45,36,53): error CS0103: The name 'Autodesk' does not exist in the current context
48>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\CtrlApplication.cs(37,43,37,51): error CS0103: The name 'Autodesk' does not exist in the current context
48>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\CtrlApplication.cs(72,51,72,74): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
48>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\CtrlApplication.cs(72,16,72,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
48>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\CtrlApplication.cs(90,52,90,75): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
48>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\CtrlApplication.cs(90,16,90,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
48>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\EventsReactor.cs(159,53,159,78): error CS0246: The type or namespace name 'DocumentSavingAsEventArgs' could not be found (are you missing a using directive or an assembly reference?)
48>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\EventsReactor.cs(170,51,170,74): error CS0246: The type or namespace name 'DocumentSavingEventArgs' could not be found (are you missing a using directive or an assembly reference?)
48>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\EventsReactor.cs(182,51,182,74): error CS0246: The type or namespace name 'DocumentClosedEventArgs' could not be found (are you missing a using directive or an assembly reference?)
48>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\EventsReactor.cs(243,46,243,54): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
48>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\EventsReactor.cs(437,47,437,55): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
48>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\EventsReactor.cs(437,72,437,76): error CS0246: The type or namespace name 'Room' could not be found (are you missing a using directive or an assembly reference?)
48>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\EventsReactor.cs(482,55,482,59): error CS0246: The type or namespace name 'Room' could not be found (are you missing a using directive or an assembly reference?)
48>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\Command.cs(40,28,40,44): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
48>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\Command.cs(37,6,37,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
48>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\Command.cs(38,6,38,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
48>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\Command.cs(39,6,39,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
48>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\Command.cs(37,44,37,52): error CS0103: The name 'Autodesk' does not exist in the current context
48>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\Command.cs(38,45,38,53): error CS0103: The name 'Autodesk' does not exist in the current context
48>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\Command.cs(39,43,39,51): error CS0103: The name 'Autodesk' does not exist in the current context
48>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\Command.cs(58,49,58,57): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
48>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\Command.cs(59,68,59,76): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
48>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\Command.cs(58,16,58,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
48>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\RoomsData.cs(103,35,103,39): error CS0246: The type or namespace name 'Room' could not be found (are you missing a using directive or an assembly reference?)
48>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\RoomsData.cs(147,57,147,73): error CS0246: The type or namespace name 'BuiltInParameter' could not be found (are you missing a using directive or an assembly reference?)
48>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\RoomsData.cs(179,44,179,49): error CS0246: The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)
48>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\RoomsData.cs(248,42,248,50): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
48>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\RoomsData.cs(248,62,248,66): error CS0246: The type or namespace name 'Room' could not be found (are you missing a using directive or an assembly reference?)
48>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\RoomsData.cs(248,73,248,89): error CS0246: The type or namespace name 'BuiltInParameter' could not be found (are you missing a using directive or an assembly reference?)
48>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\RoomsData.cs(323,49,323,53): error CS0246: The type or namespace name 'Room' could not be found (are you missing a using directive or an assembly reference?)
48>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\RoomsData.cs(323,85,323,94): error CS0246: The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)
48>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\RoomsData.cs(342,34,342,42): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
48>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\RoomsData.cs(359,45,359,49): error CS0246: The type or namespace name 'Room' could not be found (are you missing a using directive or an assembly reference?)
48>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\RoomsData.cs(359,57,359,61): error CS0246: The type or namespace name 'Room' could not be found (are you missing a using directive or an assembly reference?)
48>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\RoomsData.cs(118,26,118,34): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
48>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\RoomsData.cs(80,9,80,17): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
48>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\RoomScheduleForm.cs(413,50,413,55): error CS0246: The type or namespace name 'Phase' could not be found (are you missing a using directive or an assembly reference?)
48>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\RoomScheduleForm.cs(457,36,457,40): error CS0246: The type or namespace name 'Room' could not be found (are you missing a using directive or an assembly reference?)
48>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\RoomsData.cs(85,14,85,18): error CS0246: The type or namespace name 'Room' could not be found (are you missing a using directive or an assembly reference?)
48>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\RoomsData.cs(90,14,90,30): error CS0246: The type or namespace name 'BuiltInParameter' could not be found (are you missing a using directive or an assembly reference?)
48>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\RoomScheduleForm.cs(76,33,76,52): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
48>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\RoomScheduleForm.cs(50,17,50,36): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
48>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\RoomScheduleForm.cs(53,17,53,25): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
48>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\RoomScheduleForm.cs(59,22,59,27): error CS0246: The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)
48>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoomSchedule\CS\RoomScheduleForm.cs(62,22,62,27): error CS0246: The type or namespace name 'Phase' could not be found (are you missing a using directive or an assembly reference?)
50>------ Rebuild All started: Project: RotateFramingObjects (RotateFramingObjects\VB.NET\RotateFramingObjects), Configuration: Debug Any CPU ------
49>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
49>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
49>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
49>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RotateFramingObjects\CS\RotateFramingObjects.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
49>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RotateFramingObjects\CS\RotateFramingObjects.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
49>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RotateFramingObjects\CS\RotateFramingObjects.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
49>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RotateFramingObjects\CS\RotateFramingObjects.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
49>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RotateFramingObjects\CS\RotateFramingObjects.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
49>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RotateFramingObjects\CS\RotateFramingObjectsForm.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
49>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RotateFramingObjects\CS\RotateFramingObjects.cs(43,40,43,56): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
49>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RotateFramingObjects\CS\RotateFramingObjects.cs(40,5,40,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
49>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RotateFramingObjects\CS\RotateFramingObjects.cs(41,5,41,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
49>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RotateFramingObjects\CS\RotateFramingObjects.cs(42,5,42,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
49>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RotateFramingObjects\CS\RotateFramingObjects.cs(40,43,40,51): error CS0103: The name 'Autodesk' does not exist in the current context
49>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RotateFramingObjects\CS\RotateFramingObjects.cs(41,44,41,52): error CS0103: The name 'Autodesk' does not exist in the current context
49>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RotateFramingObjects\CS\RotateFramingObjects.cs(42,42,42,50): error CS0103: The name 'Autodesk' does not exist in the current context
49>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RotateFramingObjects\CS\RotateFramingObjects.cs(102,47,102,55): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
49>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RotateFramingObjects\CS\RotateFramingObjects.cs(103,31,103,39): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
49>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RotateFramingObjects\CS\RotateFramingObjects.cs(102,14,102,22): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
49>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RotateFramingObjects\CS\RotateFramingObjects.cs(302,57,302,71): error CS0246: The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)
49>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RotateFramingObjects\CS\RotateFramingObjects.cs(45,7,45,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
51>------ Rebuild All started: Project: SpanDirection, Configuration: Debug Any CPU ------
50>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
50>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
50>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RotateFramingObjects\VB.NET\RotateFramingObjects.vb(28,9): error BC40056: Namespace or type specified in the Imports 'Autodesk.Revit' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.
50>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RotateFramingObjects\VB.NET\RotateFramingObjects.vb(29,9): error BC40056: Namespace or type specified in the Imports 'Autodesk.Revit.DB' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.
50>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RotateFramingObjects\VB.NET\RotateFramingObjects.vb(30,9): error BC40056: Namespace or type specified in the Imports 'Autodesk.Revit.UI' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.
50>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RotateFramingObjects\VB.NET\RotateFramingObjects.vb(41,23): error BC30002: Type 'Autodesk.Revit.UI.UIApplication' is not defined.
50>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RotateFramingObjects\VB.NET\RotateFramingObjects.vb(80,24): error BC30002: Type 'Autodesk.Revit.UI.ExternalCommandData' is not defined.
50>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RotateFramingObjects\VB.NET\RotateFramingObjects.vb(82,21): error BC30002: Type 'Autodesk.Revit.DB.ElementSet' is not defined.
50>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RotateFramingObjects\VB.NET\RotateFramingObjects.vb(83,8): error BC30002: Type 'Autodesk.Revit.UI.Result' is not defined.
50>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RotateFramingObjects\VB.NET\RotateFramingObjects.vb(83,44): error BC30002: Type 'IExternalCommand' is not defined.
50>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RotateFramingObjects\VB.NET\RotateFramingObjects.vb(262,35): error BC30002: Type 'Autodesk.Revit.DB.FamilyInstance' is not defined.
50>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RotateFramingObjects\VB.NET\RotateFramingObjects.vb(39,15): error BC30002: Type 'IExternalCommand' is not defined.
50>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RotateFramingObjects\VB.NET\RotateFramingObjects.vb(35,2): error BC30002: Type 'Autodesk.Revit.Attributes.Transaction' is not defined.
50>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RotateFramingObjects\VB.NET\RotateFramingObjects.vb(36,2): error BC30002: Type 'Autodesk.Revit.Attributes.Regeneration' is not defined.
50>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RotateFramingObjects\VB.NET\RotateFramingObjects.vb(37,2): error BC30002: Type 'Autodesk.Revit.Attributes.Journaling' is not defined.
50>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RotateFramingObjects\VB.NET\RotateFramingObjects.vb(35,40): error BC30451: 'Autodesk' is not declared. It may be inaccessible due to its protection level.
50>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RotateFramingObjects\VB.NET\RotateFramingObjects.vb(36,41): error BC30451: 'Autodesk' is not declared. It may be inaccessible due to its protection level.
50>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RotateFramingObjects\VB.NET\RotateFramingObjects.vb(37,39): error BC30451: 'Autodesk' is not declared. It may be inaccessible due to its protection level.
52>------ Rebuild All started: Project: SpotDimension, Configuration: Debug Any CPU ------
51>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
51>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
51>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
51>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpanDirection\CS\Command.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
51>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpanDirection\CS\Command.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
51>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpanDirection\CS\Command.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
51>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpanDirection\CS\Command.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
51>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpanDirection\CS\Command.cs(40,28,40,44): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
51>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpanDirection\CS\Command.cs(37,6,37,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
51>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpanDirection\CS\Command.cs(38,6,38,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
51>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpanDirection\CS\Command.cs(39,6,39,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
51>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpanDirection\CS\Command.cs(37,44,37,52): error CS0103: The name 'Autodesk' does not exist in the current context
51>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpanDirection\CS\Command.cs(38,45,38,53): error CS0103: The name 'Autodesk' does not exist in the current context
51>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpanDirection\CS\Command.cs(39,43,39,51): error CS0103: The name 'Autodesk' does not exist in the current context
51>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpanDirection\CS\Command.cs(60,49,60,57): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
51>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpanDirection\CS\Command.cs(60,120,60,128): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
51>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpanDirection\CS\Command.cs(60,16,60,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
51>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpanDirection\CS\Command.cs(104,41,104,46): error CS0246: The type or namespace name 'Floor' could not be found (are you missing a using directive or an assembly reference?)
51>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpanDirection\CS\Command.cs(42,16,42,24): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
53>------ Rebuild All started: Project: TestFloorThickness, Configuration: Debug Any CPU ------
52>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
52>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
52>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
52>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpotDimension\CS\Command.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
52>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpotDimension\CS\Command.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
52>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpotDimension\CS\Command.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
52>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpotDimension\CS\SpotDimensionInfoDlg.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
52>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpotDimension\CS\SpotDimensionParams.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
52>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpotDimension\CS\SpotDimensionParams.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
52>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpotDimension\CS\SpotDimensionsData.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
52>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpotDimension\CS\SpotDimensionsData.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
52>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpotDimension\CS\SpotDimensionsData.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
52>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpotDimension\CS\SpotDimensionsData.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
52>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpotDimension\CS\SpotDimensionInfoDlg.cs(37,11,37,19): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
52>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpotDimension\CS\SpotDimensionInfoDlg.cs(38,11,38,19): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
52>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpotDimension\CS\Command.cs(39,28,39,44): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
52>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpotDimension\CS\Command.cs(36,6,36,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
52>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpotDimension\CS\Command.cs(37,6,37,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
52>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpotDimension\CS\Command.cs(38,6,38,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
52>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpotDimension\CS\Command.cs(36,44,36,52): error CS0103: The name 'Autodesk' does not exist in the current context
52>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpotDimension\CS\Command.cs(37,45,37,53): error CS0103: The name 'Autodesk' does not exist in the current context
52>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpotDimension\CS\Command.cs(38,43,38,51): error CS0103: The name 'Autodesk' does not exist in the current context
52>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpotDimension\CS\Command.cs(57,49,57,57): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
52>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpotDimension\CS\Command.cs(59,48,59,58): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
52>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpotDimension\CS\Command.cs(57,16,57,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
52>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpotDimension\CS\SpotDimensionInfoDlg.cs(47,16,47,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
52>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpotDimension\CS\SpotDimensionInfoDlg.cs(67,37,67,56): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
52>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpotDimension\CS\SpotDimensionInfoDlg.Designer.cs(38,17,38,25): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
52>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpotDimension\CS\SpotDimensionParams.cs(88,44,88,52): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
52>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpotDimension\CS\SpotDimensionParams.cs(77,36,77,44): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
52>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpotDimension\CS\SpotDimensionParams.cs(47,9,47,17): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
52>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpotDimension\CS\SpotDimensionsData.cs(51,35,51,43): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
52>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpotDimension\CS\SpotDimensionsData.cs(74,35,74,54): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
52>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpotDimension\CS\SpotDimensionsData.cs(44,9,44,22): error CS0246: The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)
52>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SpotDimension\CS\SpotDimensionsData.cs(46,14,46,22): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
54>------ Rebuild All started: Project: TransactionControl, Configuration: Debug Any CPU ------
53>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
53>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
53>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TestFloorThickness\VB.NET\Command.vb(23,9): error BC40056: Namespace or type specified in the Imports 'Autodesk.Revit.DB' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.
53>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TestFloorThickness\VB.NET\Command.vb(50,49): error BC30002: Type 'Autodesk.Revit.UI.ExternalCommandData' is not defined.
53>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TestFloorThickness\VB.NET\Command.vb(51,26): error BC30002: Type 'Autodesk.Revit.DB.ElementSet' is not defined.
53>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TestFloorThickness\VB.NET\Command.vb(51,59): error BC30002: Type 'Autodesk.Revit.UI.Result' is not defined.
53>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TestFloorThickness\VB.NET\Command.vb(52,19): error BC30002: Type 'Autodesk.Revit.UI.IExternalCommand' is not defined.
53>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TestFloorThickness\VB.NET\Command.vb(30,15): error BC30002: Type 'Autodesk.Revit.UI.IExternalCommand' is not defined.
53>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TestFloorThickness\VB.NET\Command.vb(25,2): error BC30002: Type 'Autodesk.Revit.Attributes.Transaction' is not defined.
53>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TestFloorThickness\VB.NET\Command.vb(26,2): error BC30002: Type 'Autodesk.Revit.Attributes.Regeneration' is not defined.
53>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TestFloorThickness\VB.NET\Command.vb(27,2): error BC30002: Type 'Autodesk.Revit.Attributes.Journaling' is not defined.
53>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TestFloorThickness\VB.NET\Command.vb(25,40): error BC30451: 'Autodesk' is not declared. It may be inaccessible due to its protection level.
53>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TestFloorThickness\VB.NET\Command.vb(26,41): error BC30451: 'Autodesk' is not declared. It may be inaccessible due to its protection level.
53>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TestFloorThickness\VB.NET\Command.vb(27,39): error BC30451: 'Autodesk' is not declared. It may be inaccessible due to its protection level.
55>------ Rebuild All started: Project: VisibilityControl, Configuration: Debug Any CPU ------
54>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
54>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
54>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
54>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TransactionControl\CS\Command.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
54>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TransactionControl\CS\Command.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
54>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TransactionControl\CS\Command.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
54>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TransactionControl\CS\CreateWallForm.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
54>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TransactionControl\CS\CreateWallForm.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
54>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TransactionControl\CS\CreateWallForm.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
54>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TransactionControl\CS\TransactionForm.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
54>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TransactionControl\CS\TransactionForm.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
54>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TransactionControl\CS\TransactionForm.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
54>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TransactionControl\CS\Command.cs(41,28,41,44): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
54>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TransactionControl\CS\Command.cs(38,6,38,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
54>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TransactionControl\CS\Command.cs(39,6,39,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
54>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TransactionControl\CS\Command.cs(40,6,40,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
54>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TransactionControl\CS\Command.cs(38,44,38,52): error CS0103: The name 'Autodesk' does not exist in the current context
54>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TransactionControl\CS\Command.cs(39,45,39,53): error CS0103: The name 'Autodesk' does not exist in the current context
54>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TransactionControl\CS\Command.cs(40,43,40,51): error CS0103: The name 'Autodesk' does not exist in the current context
54>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TransactionControl\CS\Command.cs(59,49,59,68): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
54>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TransactionControl\CS\Command.cs(60,29,60,37): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
54>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TransactionControl\CS\Command.cs(59,16,59,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
54>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TransactionControl\CS\CreateWallForm.cs(54,16,54,20): error CS0246: The type or namespace name 'Wall' could not be found (are you missing a using directive or an assembly reference?)
54>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TransactionControl\CS\CreateWallForm.cs(66,31,66,50): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
54>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TransactionControl\CS\CreateWallForm.cs(45,17,45,36): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
54>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TransactionControl\CS\CreateWallForm.cs(49,17,49,21): error CS0246: The type or namespace name 'Wall' could not be found (are you missing a using directive or an assembly reference?)
54>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TransactionControl\CS\TransactionForm.cs(127,32,127,51): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
54>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TransactionControl\CS\TransactionForm.cs(62,17,62,36): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
54>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TransactionControl\CS\TransactionForm.cs(66,17,66,25): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
54>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TransactionControl\CS\TransactionForm.cs(102,17,102,33): error CS0246: The type or namespace name 'TransactionGroup' could not be found (are you missing a using directive or an assembly reference?)
54>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TransactionControl\CS\TransactionForm.cs(105,17,105,33): error CS0246: The type or namespace name 'TransactionGroup' could not be found (are you missing a using directive or an assembly reference?)
54>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TransactionControl\CS\TransactionForm.cs(109,17,109,28): error CS0246: The type or namespace name 'Transaction' could not be found (are you missing a using directive or an assembly reference?)
54>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TransactionControl\CS\TransactionForm.cs(121,17,121,21): error CS0246: The type or namespace name 'Wall' could not be found (are you missing a using directive or an assembly reference?)
55>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
55>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
55>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
55>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\VisibilityControl\CS\Command.cs(25,7,25,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
55>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\VisibilityControl\CS\Command.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
55>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\VisibilityControl\CS\Command.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
55>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\VisibilityControl\CS\VisibilityCtrl.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
55>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\VisibilityControl\CS\VisibilityCtrlForm.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
55>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\VisibilityControl\CS\VisibilityCtrlForm.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
55>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\VisibilityControl\CS\Command.cs(37,28,37,44): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
55>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\VisibilityControl\CS\Command.cs(34,6,34,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
55>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\VisibilityControl\CS\Command.cs(35,6,35,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
55>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\VisibilityControl\CS\Command.cs(36,6,36,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
55>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\VisibilityControl\CS\Command.cs(34,44,34,52): error CS0103: The name 'Autodesk' does not exist in the current context
55>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\VisibilityControl\CS\Command.cs(35,45,35,53): error CS0103: The name 'Autodesk' does not exist in the current context
55>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\VisibilityControl\CS\Command.cs(36,43,36,51): error CS0103: The name 'Autodesk' does not exist in the current context
55>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\VisibilityControl\CS\Command.cs(55,57,55,76): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
55>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\VisibilityControl\CS\Command.cs(56,35,56,43): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
55>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\VisibilityControl\CS\Command.cs(55,24,55,32): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
55>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\VisibilityControl\CS\VisibilityCtrl.cs(81,31,81,39): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
55>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\VisibilityControl\CS\VisibilityCtrl.cs(45,17,45,25): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
56>------ Rebuild All started: Project: BeamAndSlabNewParameter, Configuration: Debug Any CPU ------
57>------ Rebuild All started: Project: CreateBeamSystem, Configuration: Debug Any CPU ------
56>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
56>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
56>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
56>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BeamAndSlabNewParameter\CS\BeamAndSlabNewParameter.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
56>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BeamAndSlabNewParameter\CS\BeamAndSlabNewParameter.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
56>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BeamAndSlabNewParameter\CS\BeamAndSlabNewParameter.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
56>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BeamAndSlabNewParameter\CS\BeamAndSlabNewParameter.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
56>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BeamAndSlabNewParameter\CS\BeamAndSlabNewParameterForm.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
56>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BeamAndSlabNewParameter\CS\BeamAndSlabNewParameter.cs(44,28,44,44): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
56>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BeamAndSlabNewParameter\CS\BeamAndSlabNewParameter.cs(41,6,41,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
56>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BeamAndSlabNewParameter\CS\BeamAndSlabNewParameter.cs(42,6,42,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
56>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BeamAndSlabNewParameter\CS\BeamAndSlabNewParameter.cs(43,6,43,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
56>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BeamAndSlabNewParameter\CS\BeamAndSlabNewParameter.cs(41,44,41,52): error CS0103: The name 'Autodesk' does not exist in the current context
56>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BeamAndSlabNewParameter\CS\BeamAndSlabNewParameter.cs(42,45,42,53): error CS0103: The name 'Autodesk' does not exist in the current context
56>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BeamAndSlabNewParameter\CS\BeamAndSlabNewParameter.cs(43,43,43,51): error CS0103: The name 'Autodesk' does not exist in the current context
56>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BeamAndSlabNewParameter\CS\BeamAndSlabNewParameter.cs(65,49,65,57): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
56>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BeamAndSlabNewParameter\CS\BeamAndSlabNewParameter.cs(67,48,67,58): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
56>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BeamAndSlabNewParameter\CS\BeamAndSlabNewParameter.cs(65,16,65,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
56>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BeamAndSlabNewParameter\CS\BeamAndSlabNewParameter.cs(346,17,346,31): error CS0246: The type or namespace name 'DefinitionFile' could not be found (are you missing a using directive or an assembly reference?)
56>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BeamAndSlabNewParameter\CS\BeamAndSlabNewParameter.cs(46,9,46,17): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
56>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\BeamAndSlabNewParameter\CS\BeamAndSlabNewParameter.cs(47,9,47,19): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
58>------ Rebuild All started: Project: GridCreation, Configuration: Debug Any CPU ------
57>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
57>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
57>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
57>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\BeamSystemBuilder.cs(31,11,31,19): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
57>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\BeamSystemBuilder.cs(32,11,32,19): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
57>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\BeamSystemData.cs(33,11,33,19): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
57>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\BeamSystemData.cs(34,11,34,19): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
57>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\BeamSystemData.cs(35,11,35,19): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
57>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\BeamSystemData.cs(36,11,36,19): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
57>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\BeamSystemParams.cs(32,11,32,19): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
57>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\BeamSystemParams.cs(33,11,33,19): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
57>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\BeamSystemSketch.cs(32,10,32,18): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
57>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\BeamTypeConverter.cs(33,11,33,19): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
57>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\BeamTypeConverter.cs(34,11,34,19): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
57>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\Command.cs(32,11,32,19): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
57>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\Command.cs(33,11,33,19): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
57>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\Command.cs(34,11,34,19): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
57>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\Line2D.cs(31,11,31,19): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
57>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\GeometryUtil.cs(31,10,31,18): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
57>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\LineSketch.cs(32,11,32,19): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
57>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\BeamSystemData.cs(85,35,85,39): error CS0246: The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)
57>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\BeamSystemData.cs(96,16,96,35): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
57>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\BeamSystemData.cs(143,42,143,54): error CS0246: The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)
57>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\BeamSystemData.cs(221,45,221,59): error CS0246: The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)
57>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\BeamSystemData.cs(115,31,115,50): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
57>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\BeamSystemData.cs(48,43,48,55): error CS0246: The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)
57>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\BeamSystemData.cs(58,17,58,36): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
57>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\BeamSystemData.cs(63,22,63,26): error CS0246: The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)
57>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\BeamSystemData.cs(69,22,69,36): error CS0246: The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)
57>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\BeamSystemParams.cs(138,16,138,28): error CS0246: The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)
57>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\BeamSystemParams.cs(210,25,210,35): error CS0246: The type or namespace name 'LayoutRule' could not be found (are you missing a using directive or an assembly reference?)
57>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\BeamSystemParams.cs(86,19,86,40): error CS0246: The type or namespace name 'BeamSystemJustifyType' could not be found (are you missing a using directive or an assembly reference?)
57>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\BeamSystemParams.cs(94,17,94,29): error CS0246: The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)
57>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\BeamSystemParams.cs(226,29,226,39): error CS0246: The type or namespace name 'LayoutRule' could not be found (are you missing a using directive or an assembly reference?)
57>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\BeamSystemParams.cs(264,20,264,41): error CS0246: The type or namespace name 'BeamSystemJustifyType' could not be found (are you missing a using directive or an assembly reference?)
57>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\BeamSystemParams.cs(221,23,221,45): error CS0246: The type or namespace name 'LayoutRuleClearSpacing' could not be found (are you missing a using directive or an assembly reference?)
57>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\BeamSystemParams.cs(299,29,299,39): error CS0246: The type or namespace name 'LayoutRule' could not be found (are you missing a using directive or an assembly reference?)
57>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\BeamSystemParams.cs(348,20,348,41): error CS0246: The type or namespace name 'BeamSystemJustifyType' could not be found (are you missing a using directive or an assembly reference?)
57>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\BeamSystemParams.cs(294,23,294,46): error CS0246: The type or namespace name 'LayoutRuleFixedDistance' could not be found (are you missing a using directive or an assembly reference?)
57>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\BeamSystemParams.cs(397,29,397,39): error CS0246: The type or namespace name 'LayoutRule' could not be found (are you missing a using directive or an assembly reference?)
57>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\BeamSystemParams.cs(368,23,368,44): error CS0246: The type or namespace name 'LayoutRuleFixedNumber' could not be found (are you missing a using directive or an assembly reference?)
57>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\BeamSystemParams.cs(451,29,451,39): error CS0246: The type or namespace name 'LayoutRule' could not be found (are you missing a using directive or an assembly reference?)
57>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\BeamSystemParams.cs(422,23,422,47): error CS0246: The type or namespace name 'LayoutRuleMaximumSpacing' could not be found (are you missing a using directive or an assembly reference?)
57>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\BeamSystemSketch.cs(68,37,68,41): error CS0246: The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)
57>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\BeamSystemSketch.cs(106,39,106,43): error CS0246: The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)
57>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\BeamSystemSketch.cs(133,37,133,41): error CS0246: The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)
57>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\BeamTypeConverter.cs(46,38,46,50): error CS0246: The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)
57>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\Command.cs(42,28,42,44): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
57>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\Command.cs(39,6,39,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
57>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\Command.cs(40,6,40,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
57>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\Command.cs(41,6,41,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
57>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\Command.cs(39,44,39,52): error CS0103: The name 'Autodesk' does not exist in the current context
57>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\Command.cs(40,45,40,53): error CS0103: The name 'Autodesk' does not exist in the current context
57>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\Command.cs(41,43,41,51): error CS0103: The name 'Autodesk' does not exist in the current context
57>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\Command.cs(60,49,60,68): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
57>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\Command.cs(60,102,60,110): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
57>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\Command.cs(60,16,60,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
57>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\GeometryUtil.cs(49,37,49,45): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
57>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\GeometryUtil.cs(49,65,49,73): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
57>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\GeometryUtil.cs(62,47,62,51): error CS0246: The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)
57>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\GeometryUtil.cs(62,26,62,30): error CS0246: The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)
57>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\GeometryUtil.cs(148,53,148,57): error CS0246: The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)
57>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\GeometryUtil.cs(169,45,169,49): error CS0246: The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)
57>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateBeamSystem\CS\GeometryUtil.cs(41,21,41,29): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
59>------ Rebuild All started: Project: NewOpenings, Configuration: Debug Any CPU ------
58>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
58>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
58>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
58>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\Command.cs(32,17,32,25): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
58>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\Command.cs(31,21,31,29): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
58>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\Command.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
58>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\Command.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
58>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\Command.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
58>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateGridsData.cs(32,21,32,29): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
58>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateGridsData.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
58>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateGridsData.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
58>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateGridsData.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
58>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateOrthogonalGridsData.cs(32,21,32,29): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
58>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateOrthogonalGridsData.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
58>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateOrthogonalGridsData.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
58>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateOrthogonalGridsData.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
58>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateRadialAndArcGridsData.cs(32,21,32,29): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
58>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateRadialAndArcGridsData.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
58>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateRadialAndArcGridsData.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
58>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateRadialAndArcGridsData.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
58>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateWithSeletedCurvesData.cs(32,21,32,29): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
58>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateWithSeletedCurvesData.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
58>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateWithSeletedCurvesData.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
58>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateWithSeletedCurvesData.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
58>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\GridCreationOptionData.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
58>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\GridCreationOptionData.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
58>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\Unit.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
58>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\Unit.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
58>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\Validation.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
58>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\Command.cs(42,28,42,44): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
58>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\Command.cs(39,6,39,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
58>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\Command.cs(40,6,40,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
58>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\Command.cs(41,6,41,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
58>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\Command.cs(39,44,39,52): error CS0103: The name 'Autodesk' does not exist in the current context
58>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\Command.cs(40,45,40,53): error CS0103: The name 'Autodesk' does not exist in the current context
58>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\Command.cs(41,43,41,51): error CS0103: The name 'Autodesk' does not exist in the current context
58>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\Command.cs(60,57,60,76): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
58>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\Command.cs(61,35,61,43): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
58>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\Command.cs(60,24,60,32): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
58>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\Command.cs(155,53,155,61): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
58>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\Command.cs(155,24,155,34): error CS0246: The type or namespace name 'CurveArray' could not be found (are you missing a using directive or an assembly reference?)
58>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\Command.cs(194,63,194,71): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
58>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\Command.cs(194,23,194,33): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
58>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\Command.cs(219,54,219,62): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
58>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\Command.cs(219,24,219,35): error CS0246: The type or namespace name 'ForgeTypeId' could not be found (are you missing a using directive or an assembly reference?)
58>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\Command.cs(239,54,239,62): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
58>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateGridsData.cs(72,16,72,27): error CS0246: The type or namespace name 'ForgeTypeId' could not be found (are you missing a using directive or an assembly reference?)
58>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateGridsData.cs(127,38,127,42): error CS0246: The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)
58>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateGridsData.cs(127,19,127,23): error CS0246: The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)
58>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateGridsData.cs(152,36,152,39): error CS0246: The type or namespace name 'Arc' could not be found (are you missing a using directive or an assembly reference?)
58>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateGridsData.cs(152,19,152,22): error CS0246: The type or namespace name 'Arc' could not be found (are you missing a using directive or an assembly reference?)
58>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateGridsData.cs(213,36,213,44): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
58>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateGridsData.cs(213,19,213,22): error CS0246: The type or namespace name 'Arc' could not be found (are you missing a using directive or an assembly reference?)
58>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateGridsData.cs(244,40,244,43): error CS0246: The type or namespace name 'Arc' could not be found (are you missing a using directive or an assembly reference?)
58>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateGridsData.cs(244,53,244,56): error CS0246: The type or namespace name 'Arc' could not be found (are you missing a using directive or an assembly reference?)
58>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateGridsData.cs(244,71,244,74): error CS0246: The type or namespace name 'Arc' could not be found (are you missing a using directive or an assembly reference?)
58>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateGridsData.cs(270,32,270,40): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
58>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateGridsData.cs(270,61,270,69): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
58>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateGridsData.cs(270,19,270,23): error CS0246: The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)
58>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateGridsData.cs(280,32,280,36): error CS0246: The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)
58>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateGridsData.cs(280,19,280,23): error CS0246: The type or namespace name 'Grid' could not be found (are you missing a using directive or an assembly reference?)
58>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateGridsData.cs(290,32,290,35): error CS0246: The type or namespace name 'Arc' could not be found (are you missing a using directive or an assembly reference?)
58>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateGridsData.cs(290,19,290,23): error CS0246: The type or namespace name 'Grid' could not be found (are you missing a using directive or an assembly reference?)
58>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateGridsData.cs(301,41,301,45): error CS0246: The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)
58>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateGridsData.cs(301,19,301,23): error CS0246: The type or namespace name 'Grid' could not be found (are you missing a using directive or an assembly reference?)
58>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateGridsData.cs(310,36,310,46): error CS0246: The type or namespace name 'CurveArray' could not be found (are you missing a using directive or an assembly reference?)
58>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateGridsData.cs(334,57,334,67): error CS0246: The type or namespace name 'CurveArray' could not be found (are you missing a using directive or an assembly reference?)
58>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateGridsData.cs(334,76,334,81): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
58>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateGridsData.cs(98,32,98,45): error CS0246: The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)
58>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateGridsData.cs(112,32,112,45): error CS0246: The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)
58>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateGridsData.cs(112,77,112,88): error CS0246: The type or namespace name 'ForgeTypeId' could not be found (are you missing a using directive or an assembly reference?)
58>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateGridsData.cs(45,19,45,27): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
58>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateGridsData.cs(49,19,49,27): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
58>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateGridsData.cs(53,19,53,27): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
58>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateGridsData.cs(61,19,61,30): error CS0246: The type or namespace name 'ForgeTypeId' could not be found (are you missing a using directive or an assembly reference?)
58>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateOrthogonalGridsData.cs(223,42,223,55): error CS0246: The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)
58>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateOrthogonalGridsData.cs(223,69,223,80): error CS0246: The type or namespace name 'ForgeTypeId' could not be found (are you missing a using directive or an assembly reference?)
58>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateRadialAndArcGridsData.cs(274,44,274,57): error CS0246: The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)
58>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateRadialAndArcGridsData.cs(274,71,274,82): error CS0246: The type or namespace name 'ForgeTypeId' could not be found (are you missing a using directive or an assembly reference?)
58>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateWithSeletedCurvesData.cs(106,43,106,56): error CS0246: The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)
58>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateWithSeletedCurvesData.cs(106,70,106,80): error CS0246: The type or namespace name 'CurveArray' could not be found (are you missing a using directive or an assembly reference?)
58>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\CreateWithSeletedCurvesData.cs(43,15,43,25): error CS0246: The type or namespace name 'CurveArray' could not be found (are you missing a using directive or an assembly reference?)
58>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\Unit.cs(47,44,47,55): error CS0246: The type or namespace name 'ForgeTypeId' could not be found (are you missing a using directive or an assembly reference?)
58>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\Unit.cs(58,56,58,67): error CS0246: The type or namespace name 'ForgeTypeId' could not be found (are you missing a using directive or an assembly reference?)
58>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GridCreation\CS\Unit.cs(68,48,68,59): error CS0246: The type or namespace name 'ForgeTypeId' could not be found (are you missing a using directive or an assembly reference?)
60>------ Rebuild All started: Project: Openings, Configuration: Debug Any CPU ------
59>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
59>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
59>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
59>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\NewOpeningsForm.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
59>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\Command.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
59>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\Command.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
59>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\Command.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
59>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\Command.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
59>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\MathTools.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
59>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\Profile.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
59>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\Profile.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
59>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\Profile.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
59>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\Profile.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
59>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\ProfileFloor.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
59>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\ProfileFloor.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
59>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\ProfileFloor.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
59>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\ProfileWall.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
59>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\ProfileWall.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
59>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\ProfileWall.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
59>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\Command.cs(44,26,44,42): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
59>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\Command.cs(41,6,41,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
59>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\Command.cs(42,6,42,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
59>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\Command.cs(43,6,43,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
59>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\Command.cs(41,44,41,52): error CS0103: The name 'Autodesk' does not exist in the current context
59>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\Command.cs(42,45,42,53): error CS0103: The name 'Autodesk' does not exist in the current context
59>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\Command.cs(43,43,43,51): error CS0103: The name 'Autodesk' does not exist in the current context
59>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\Command.cs(63,49,63,68): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
59>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\Command.cs(64,33,64,41): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
59>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\Command.cs(63,16,63,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
59>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\MathTools.cs(139,24,139,32): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
59>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\Profile.cs(121,40,121,48): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
59>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\Profile.cs(121,24,121,28): error CS0246: The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)
59>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\Profile.cs(163,42,163,46): error CS0246: The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)
59>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\Profile.cs(193,48,193,52): error CS0246: The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)
59>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\Profile.cs(193,20,193,24): error CS0246: The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)
59>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\Profile.cs(278,48,278,52): error CS0246: The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)
59>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\Profile.cs(278,20,278,24): error CS0246: The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)
59>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\Profile.cs(106,22,106,30): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
59>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\Profile.cs(106,54,106,73): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
59>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\Profile.cs(46,17,46,25): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
59>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\Profile.cs(51,22,51,26): error CS0246: The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)
59>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\Profile.cs(56,17,56,25): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
59>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\Profile.cs(61,17,61,25): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
59>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\Profile.cs(66,17,66,25): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
59>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\ProfileFloor.cs(48,27,48,32): error CS0246: The type or namespace name 'Floor' could not be found (are you missing a using directive or an assembly reference?)
59>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\ProfileFloor.cs(48,40,48,59): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
59>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\ProfileFloor.cs(41,15,41,20): error CS0246: The type or namespace name 'Floor' could not be found (are you missing a using directive or an assembly reference?)
59>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\ProfileWall.cs(47,28,47,32): error CS0246: The type or namespace name 'Wall' could not be found (are you missing a using directive or an assembly reference?)
59>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\ProfileWall.cs(47,39,47,58): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
59>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewOpenings\CS\ProfileWall.cs(40,17,40,21): error CS0246: The type or namespace name 'Wall' could not be found (are you missing a using directive or an assembly reference?)
61>------ Rebuild All started: Project: PathReinforcement, Configuration: Debug Any CPU ------
61>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
61>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
61>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
61>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathReinforcement\CS\Command.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
61>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathReinforcement\CS\Command.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
61>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathReinforcement\CS\Command.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
61>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathReinforcement\CS\Command.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
61>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathReinforcement\CS\BarTypeConverter.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
61>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathReinforcement\CS\BarTypeConverter.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
61>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathReinforcement\CS\MathTools.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
61>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathReinforcement\CS\PathReinProperties.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
61>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathReinforcement\CS\PathReinProperties.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
61>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathReinforcement\CS\Profile.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
61>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathReinforcement\CS\Profile.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
61>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathReinforcement\CS\Profile.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
61>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathReinforcement\CS\Command.cs(43,28,43,44): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
61>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathReinforcement\CS\Command.cs(40,6,40,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
61>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathReinforcement\CS\Command.cs(41,6,41,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
61>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathReinforcement\CS\Command.cs(42,6,42,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
61>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathReinforcement\CS\Command.cs(40,44,40,52): error CS0103: The name 'Autodesk' does not exist in the current context
61>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathReinforcement\CS\Command.cs(41,45,41,53): error CS0103: The name 'Autodesk' does not exist in the current context
61>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathReinforcement\CS\Command.cs(42,43,42,51): error CS0103: The name 'Autodesk' does not exist in the current context
61>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathReinforcement\CS\Command.cs(78,49,78,68): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
61>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathReinforcement\CS\Command.cs(79,33,79,41): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
61>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathReinforcement\CS\Command.cs(78,16,78,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
61>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathReinforcement\CS\MathTools.cs(131,24,131,32): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
61>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathReinforcement\CS\PathReinforcementForm.cs(65,38,65,46): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
61>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathReinforcement\CS\PathReinforcementForm.cs(66,38,66,46): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
61>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathReinforcement\CS\PathReinforcementForm.cs(43,17,43,25): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
61>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathReinforcement\CS\PathReinProperties.cs(264,16,264,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
61>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathReinforcement\CS\PathReinProperties.cs(318,19,318,28): error CS0246: The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)
61>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathReinforcement\CS\PathReinProperties.cs(125,35,125,43): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
61>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathReinforcement\CS\PathReinProperties.cs(77,19,77,27): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
61>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathReinforcement\CS\PathReinProperties.cs(102,17,102,25): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
61>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathReinforcement\CS\Profile.cs(83,22,83,30): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
61>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathReinforcement\CS\Profile.cs(83,78,83,97): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
61>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathReinforcement\CS\Profile.cs(43,15,43,23): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
61>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathReinforcement\CS\Profile.cs(48,15,48,23): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
61>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathReinforcement\CS\Profile.cs(54,25,54,28): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
61>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathReinforcement\CS\Profile.cs(59,25,59,28): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
61>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathReinforcement\CS\Profile.cs(65,15,65,28): error CS0246: The type or namespace name 'BoundingBoxUV' could not be found (are you missing a using directive or an assembly reference?)
61>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathReinforcement\CS\Profile.cs(71,25,71,27): error CS0246: The type or namespace name 'UV' could not be found (are you missing a using directive or an assembly reference?)
61>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathReinforcement\CS\Profile.cs(76,25,76,27): error CS0246: The type or namespace name 'UV' could not be found (are you missing a using directive or an assembly reference?)
62>------ Rebuild All started: Project: PhysicalProp, Configuration: Debug Any CPU ------
60>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
60>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
60>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
60>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Openings\CS\BoundingBox.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
60>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Openings\CS\BoundingBox.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
60>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Openings\CS\BoundingBox.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
60>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Openings\CS\BoundingBox.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
60>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Openings\CS\Command.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
60>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Openings\CS\Command.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
60>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Openings\CS\Command.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
60>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Openings\CS\Command.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
60>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Openings\CS\Command.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
60>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Openings\CS\LineSketch.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
60>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Openings\CS\OpeningInfo.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
60>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Openings\CS\OpeningInfo.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
60>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Openings\CS\OpeningInfo.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
60>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Openings\CS\OpeningInfo.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
60>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Openings\CS\OpeningProperty.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
60>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Openings\CS\BoundingBox.cs(39,31,39,45): error CS0246: The type or namespace name 'BoundingBoxXYZ' could not be found (are you missing a using directive or an assembly reference?)
60>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Openings\CS\BoundingBox.cs(54,19,54,27): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
60>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Openings\CS\BoundingBox.cs(109,31,109,44): error CS0246: The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)
60>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Openings\CS\BoundingBox.cs(185,50,185,54): error CS0246: The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)
60>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Openings\CS\BoundingBox.cs(185,62,185,75): error CS0246: The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)
60>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Openings\CS\BoundingBox.cs(185,15,185,26): error CS0246: The type or namespace name 'SketchPlane' could not be found (are you missing a using directive or an assembly reference?)
60>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Openings\CS\BoundingBox.cs(214,33,214,46): error CS0246: The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)
60>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Openings\CS\BoundingBox.cs(96,26,96,40): error CS0246: The type or namespace name 'BoundingBoxXYZ' could not be found (are you missing a using directive or an assembly reference?)
60>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Openings\CS\BoundingBox.cs(49,29,49,37): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
60>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Openings\CS\Command.cs(42,28,42,44): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
60>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Openings\CS\Command.cs(39,6,39,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
60>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Openings\CS\Command.cs(40,6,40,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
60>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Openings\CS\Command.cs(41,6,41,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
60>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Openings\CS\Command.cs(39,44,39,52): error CS0103: The name 'Autodesk' does not exist in the current context
60>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Openings\CS\Command.cs(40,45,40,53): error CS0103: The name 'Autodesk' does not exist in the current context
60>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Openings\CS\Command.cs(41,43,41,51): error CS0103: The name 'Autodesk' does not exist in the current context
60>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Openings\CS\Command.cs(62,49,62,68): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
60>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Openings\CS\Command.cs(63,33,63,41): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
60>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Openings\CS\Command.cs(62,16,62,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
60>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Openings\CS\OpeningInfo.cs(55,16,55,29): error CS0246: The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)
60>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Openings\CS\OpeningInfo.cs(71,16,71,23): error CS0246: The type or namespace name 'Opening' could not be found (are you missing a using directive or an assembly reference?)
60>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Openings\CS\OpeningInfo.cs(212,42,212,45): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
60>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Openings\CS\OpeningInfo.cs(212,22,212,25): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
60>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Openings\CS\OpeningInfo.cs(244,35,244,38): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
60>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Openings\CS\OpeningInfo.cs(155,28,155,35): error CS0246: The type or namespace name 'Opening' could not be found (are you missing a using directive or an assembly reference?)
60>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Openings\CS\OpeningInfo.cs(155,45,155,58): error CS0246: The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)
60>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Openings\CS\OpeningInfo.cs(42,17,42,30): error CS0246: The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)
60>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Openings\CS\OpeningInfo.cs(44,17,44,24): error CS0246: The type or namespace name 'Opening' could not be found (are you missing a using directive or an assembly reference?)
60>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Openings\CS\OpeningProperty.cs(47,32,47,39): error CS0246: The type or namespace name 'Opening' could not be found (are you missing a using directive or an assembly reference?)
63>------ Rebuild All started: Project: SharedCoordinateSystem, Configuration: Debug Any CPU ------
62>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
62>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
62>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
62>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PhysicalProp\CS\Command.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
62>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PhysicalProp\CS\Command.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
62>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PhysicalProp\CS\Command.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
62>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PhysicalProp\CS\Command.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
62>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PhysicalProp\CS\Command.cs(40,51,40,59): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
62>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PhysicalProp\CS\Command.cs(37,6,37,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
62>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PhysicalProp\CS\Command.cs(38,6,38,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
62>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PhysicalProp\CS\Command.cs(39,6,39,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
62>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PhysicalProp\CS\Command.cs(37,44,37,52): error CS0103: The name 'Autodesk' does not exist in the current context
62>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PhysicalProp\CS\Command.cs(38,45,38,53): error CS0103: The name 'Autodesk' does not exist in the current context
62>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PhysicalProp\CS\Command.cs(39,43,39,51): error CS0103: The name 'Autodesk' does not exist in the current context
62>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PhysicalProp\CS\Command.cs(58,49,58,68): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
62>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PhysicalProp\CS\Command.cs(59,33,59,43): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
62>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PhysicalProp\CS\Command.cs(58,16,58,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
64>------ Rebuild All started: Project: AnalyticalViewer, Configuration: Debug Any CPU ------
63>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
63>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
63>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
63>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SharedCoordinateSystem\CS\Command.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
63>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SharedCoordinateSystem\CS\Command.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
63>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SharedCoordinateSystem\CS\Command.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
63>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SharedCoordinateSystem\CS\CoordinateSystemData.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
63>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SharedCoordinateSystem\CS\CoordinateSystemData.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
63>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SharedCoordinateSystem\CS\CoordinateSystemData.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
63>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SharedCoordinateSystem\CS\CoordinateSystemDataForm.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
63>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SharedCoordinateSystem\CS\CoordinateSystemDataForm.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
63>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SharedCoordinateSystem\CS\CoordinateSystemDataForm.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
63>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SharedCoordinateSystem\CS\DuplicateForm.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
63>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SharedCoordinateSystem\CS\PlaceInfo.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
63>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SharedCoordinateSystem\CS\PlaceInfo.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
63>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SharedCoordinateSystem\CS\PlaceInfo.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
63>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SharedCoordinateSystem\CS\Command.cs(40,27,40,43): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
63>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SharedCoordinateSystem\CS\Command.cs(37,5,37,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
63>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SharedCoordinateSystem\CS\Command.cs(38,5,38,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
63>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SharedCoordinateSystem\CS\Command.cs(39,5,39,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
63>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SharedCoordinateSystem\CS\Command.cs(37,43,37,51): error CS0103: The name 'Autodesk' does not exist in the current context
63>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SharedCoordinateSystem\CS\Command.cs(38,44,38,52): error CS0103: The name 'Autodesk' does not exist in the current context
63>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SharedCoordinateSystem\CS\Command.cs(39,42,39,50): error CS0103: The name 'Autodesk' does not exist in the current context
63>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SharedCoordinateSystem\CS\Command.cs(59,47,59,66): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
63>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SharedCoordinateSystem\CS\Command.cs(60,66,60,74): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
63>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SharedCoordinateSystem\CS\Command.cs(59,14,59,22): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
63>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SharedCoordinateSystem\CS\CoordinateSystemData.cs(127,35,127,54): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
63>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SharedCoordinateSystem\CS\CoordinateSystemData.cs(40,7,40,26): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
63>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SharedCoordinateSystem\CS\CoordinateSystemData.cs(41,7,41,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
63>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SharedCoordinateSystem\CS\PlaceInfo.cs(287,32,287,39): error CS0246: The type or namespace name 'CitySet' could not be found (are you missing a using directive or an assembly reference?)
63>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SharedCoordinateSystem\CS\PlaceInfo.cs(493,33,493,40): error CS0246: The type or namespace name 'CitySet' could not be found (are you missing a using directive or an assembly reference?)
63>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SharedCoordinateSystem\CS\PlaceInfo.cs(277,26,277,33): error CS0246: The type or namespace name 'CitySet' could not be found (are you missing a using directive or an assembly reference?)
63>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SharedCoordinateSystem\CS\CoordinateSystemDataForm.cs(85,68,85,75): error CS0246: The type or namespace name 'CitySet' could not be found (are you missing a using directive or an assembly reference?)
63>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SharedCoordinateSystem\CS\CoordinateSystemDataForm.cs(85,85,85,97): error CS0246: The type or namespace name 'SiteLocation' could not be found (are you missing a using directive or an assembly reference?)
63>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SharedCoordinateSystem\CS\CoordinateSystemDataForm.cs(51,17,51,29): error CS0246: The type or namespace name 'SiteLocation' could not be found (are you missing a using directive or an assembly reference?)
65>------ Rebuild All started: Project: ElementViewer, Configuration: Debug Any CPU ------
65>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
65>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
65>vbc : error BC2017: could not find library 'Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Viewers\RevitViewer\VB.NET\bin\RevitViewer.dll'
64>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
64>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
64>vbc : error BC2017: could not find library 'Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Viewers\RevitViewer\VB.NET\bin\RevitViewer.dll'
66>------ Rebuild All started: Project: RoomViewer, Configuration: Debug Any CPU ------
67>------ Rebuild All started: Project: CurvedBeam, Configuration: Debug Any CPU ------
66>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
66>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
66>vbc : error BC2017: could not find library 'Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Viewers\RevitViewer\VB.NET\bin\RevitViewer.dll'
68>------ Rebuild All started: Project: FrameBuilder, Configuration: Debug Any CPU ------
67>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
67>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
67>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
67>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurvedBeam\CS\CurvedBeam.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
67>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurvedBeam\CS\CurvedBeam.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
67>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurvedBeam\CS\CurvedBeam.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
67>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurvedBeam\CS\CurvedBeam.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
67>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurvedBeam\CS\CurvedBeam.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
67>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurvedBeam\CS\CurvedBeamForm.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
67>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurvedBeam\CS\CurvedBeamForm.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
67>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurvedBeam\CS\CurvedBeam.cs(43,28,43,44): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
67>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurvedBeam\CS\CurvedBeam.cs(40,6,40,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
67>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurvedBeam\CS\CurvedBeam.cs(41,6,41,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
67>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurvedBeam\CS\CurvedBeam.cs(42,6,42,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
67>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurvedBeam\CS\CurvedBeam.cs(40,44,40,52): error CS0103: The name 'Autodesk' does not exist in the current context
67>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurvedBeam\CS\CurvedBeam.cs(41,45,41,53): error CS0103: The name 'Autodesk' does not exist in the current context
67>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurvedBeam\CS\CurvedBeam.cs(42,43,42,51): error CS0103: The name 'Autodesk' does not exist in the current context
67>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurvedBeam\CS\CurvedBeam.cs(94,49,94,68): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
67>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurvedBeam\CS\CurvedBeam.cs(94,102,94,110): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
67>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurvedBeam\CS\CurvedBeam.cs(94,16,94,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
67>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurvedBeam\CS\CurvedBeam.cs(185,16,185,19): error CS0246: The type or namespace name 'Arc' could not be found (are you missing a using directive or an assembly reference?)
67>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurvedBeam\CS\CurvedBeam.cs(200,16,200,21): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
67>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurvedBeam\CS\CurvedBeam.cs(218,16,218,21): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
67>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurvedBeam\CS\CurvedBeam.cs(256,38,256,50): error CS0246: The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)
67>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurvedBeam\CS\CurvedBeam.cs(256,59,256,64): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
67>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurvedBeam\CS\CurvedBeam.cs(256,72,256,77): error CS0246: The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)
67>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurvedBeam\CS\CurvedBeam.cs(46,9,46,17): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
67>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurvedBeam\CS\CurvedBeam.cs(340,16,340,28): error CS0246: The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)
67>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurvedBeam\CS\CurvedBeam.cs(313,26,313,38): error CS0246: The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)
67>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurvedBeam\CS\CurvedBeam.cs(296,9,296,21): error CS0246: The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)
67>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurvedBeam\CS\CurvedBeam.cs(398,16,398,21): error CS0246: The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)
67>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurvedBeam\CS\CurvedBeam.cs(375,25,375,30): error CS0246: The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)
67>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurvedBeam\CS\CurvedBeam.cs(357,9,357,14): error CS0246: The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)
69>------ Rebuild All started: Project: Loads, Configuration: Debug Any CPU ------
68>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
68>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
68>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
68>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.CSharp.CurrentVersion.targets(134,9): warning MSB3884: Could not find rule set file "Migrated rules for FrameBuilder.ruleset".
68>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\Command.cs(22,7,22,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
68>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameTypesMgr.cs(22,7,22,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
68>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\Command.cs(32,11,32,19): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
68>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\CreateFrameForm.cs(34,11,34,19): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
68>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\CreateFrameForm.cs(35,11,35,19): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
68>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\DuplicateTypeForm.cs(32,11,32,19): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
68>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\DuplicateTypeForm.cs(33,11,33,19): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
68>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameBuilder.cs(36,25,36,33): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
68>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameBuilder.cs(30,10,30,18): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
68>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameBuilder.cs(31,10,31,18): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
68>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameBuilder.cs(32,10,32,18): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
68>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameBuilder.cs(33,10,33,18): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
68>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameBuilder.cs(34,10,34,18): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
68>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameData.cs(33,16,33,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
68>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameData.cs(29,11,29,19): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
68>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameData.cs(30,11,30,19): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
68>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameData.cs(31,11,31,19): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
68>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameData.cs(32,11,32,19): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
68>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameTypeParameters.cs(31,11,31,19): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
68>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameTypeParameters.cs(32,11,32,19): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
68>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameTypesMgr.cs(31,11,31,19): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
68>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameTypesMgr.cs(32,11,32,19): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
68>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\Command.cs(40,28,40,44): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
68>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\Command.cs(37,6,37,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
68>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\Command.cs(38,5,38,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
68>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\Command.cs(39,6,39,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
68>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\Command.cs(37,44,37,52): error CS0103: The name 'Autodesk' does not exist in the current context
68>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\Command.cs(38,44,38,52): error CS0103: The name 'Autodesk' does not exist in the current context
68>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\Command.cs(39,43,39,51): error CS0103: The name 'Autodesk' does not exist in the current context
68>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\Command.cs(59,49,59,68): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
68>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\Command.cs(60,33,60,41): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
68>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\Command.cs(59,16,59,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
68>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\DuplicateTypeForm.cs(40,17,40,29): error CS0246: The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)
68>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\DuplicateTypeForm.cs(41,17,41,29): error CS0246: The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)
68>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameBuilder.cs(149,22,149,30): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
68>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameBuilder.cs(170,40,170,48): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
68>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameBuilder.cs(170,70,170,75): error CS0246: The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)
68>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameBuilder.cs(170,87,170,92): error CS0246: The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)
68>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameBuilder.cs(170,15,170,29): error CS0246: The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)
68>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameBuilder.cs(196,38,196,46): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
68>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameBuilder.cs(196,69,196,77): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
68>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameBuilder.cs(196,100,196,105): error CS0246: The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)
68>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameBuilder.cs(196,15,196,29): error CS0246: The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)
68>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameBuilder.cs(218,46,218,54): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
68>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameBuilder.cs(218,77,218,85): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
68>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameBuilder.cs(218,108,218,113): error CS0246: The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)
68>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameBuilder.cs(218,125,218,130): error CS0246: The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)
68>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameBuilder.cs(218,20,218,34): error CS0246: The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)
68>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameBuilder.cs(253,11,253,27): error CS0246: The type or namespace name 'BuiltInParameter' could not be found (are you missing a using directive or an assembly reference?)
68>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameBuilder.cs(253,41,253,49): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
68>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameBuilder.cs(272,11,272,27): error CS0246: The type or namespace name 'BuiltInParameter' could not be found (are you missing a using directive or an assembly reference?)
68>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameBuilder.cs(288,41,288,55): error CS0246: The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)
68>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameBuilder.cs(305,32,305,40): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
68>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameBuilder.cs(305,46,305,54): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
68>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameBuilder.cs(305,78,305,86): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
68>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameBuilder.cs(320,34,320,47): error CS0246: The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)
68>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameBuilder.cs(320,53,320,61): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
68>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameBuilder.cs(320,85,320,93): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
68>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameBuilder.cs(44,7,44,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
68>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameBuilder.cs(45,7,45,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
68>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameData.cs(77,16,77,35): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
68>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameData.cs(234,16,234,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
68>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameData.cs(264,16,264,28): error CS0246: The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)
68>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameData.cs(275,16,275,28): error CS0246: The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)
68>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameData.cs(286,16,286,28): error CS0246: The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)
68>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameData.cs(297,35,297,40): error CS0246: The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)
68>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameData.cs(322,48,322,67): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
68>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameData.cs(432,27,432,46): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
68>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameData.cs(61,9,61,17): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
68>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameData.cs(65,9,65,21): error CS0246: The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)
68>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameData.cs(66,9,66,21): error CS0246: The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)
68>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameData.cs(67,9,67,21): error CS0246: The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)
68>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameData.cs(69,9,69,28): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
68>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameData.cs(72,28,72,33): error CS0246: The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)
68>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameTypeParameters.cs(109,58,109,70): error CS0246: The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)
68>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameTypeParameters.cs(85,37,85,49): error CS0246: The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)
68>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameTypeParameters.cs(39,9,39,18): error CS0246: The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)
68>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameTypeParameters.cs(40,9,40,18): error CS0246: The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)
68>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameTypesMgr.cs(48,16,48,35): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
68>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameTypesMgr.cs(88,35,88,47): error CS0246: The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)
68>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameTypesMgr.cs(101,31,101,39): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
68>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameTypesMgr.cs(116,34,116,46): error CS0246: The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)
68>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameTypesMgr.cs(143,45,143,56): error CS0246: The type or namespace name 'ElementType' could not be found (are you missing a using directive or an assembly reference?)
68>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameTypesMgr.cs(143,16,143,28): error CS0246: The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)
68>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameTypesMgr.cs(71,30,71,49): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
68>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameTypesMgr.cs(40,36,40,48): error CS0246: The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)
68>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameTypesMgr.cs(42,22,42,34): error CS0246: The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)
68>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FrameBuilder\CS\FrameTypesMgr.cs(43,17,43,36): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
70>------ Rebuild All started: Project: RevitCommands, Configuration: Debug Any CPU ------
70>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
70>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
70>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\LibraryPath.vb(27,9): error BC40056: Namespace or type specified in the Imports 'Autodesk.Revit' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.
70>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\LibraryPath.vb(28,9): error BC40056: Namespace or type specified in the Imports 'Autodesk.Revit.DB' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.
70>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\LibraryPath.vb(61,50): error BC30002: Type 'Autodesk.Revit.UI.ExternalCommandData' is not defined.
70>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\LibraryPath.vb(62,48): error BC30002: Type 'Autodesk.Revit.DB.ElementSet' is not defined.
70>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\LibraryPath.vb(63,8): error BC30002: Type 'Autodesk.Revit.UI.Result' is not defined.
70>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\LibraryPath.vb(63,44): error BC30002: Type 'Autodesk.Revit.UI.IExternalCommand' is not defined.
70>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\LibraryPath.vb(43,16): error BC30002: Type 'Autodesk.Revit.UI.IExternalCommand' is not defined.
70>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\LibraryPath.vb(38,2): error BC30002: Type 'Autodesk.Revit.Attributes.Transaction' is not defined.
70>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\LibraryPath.vb(39,2): error BC30002: Type 'Autodesk.Revit.Attributes.Regeneration' is not defined.
70>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\LibraryPath.vb(40,2): error BC30002: Type 'Autodesk.Revit.Attributes.Journaling' is not defined.
70>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\LibraryPath.vb(38,40): error BC30451: 'Autodesk' is not declared. It may be inaccessible due to its protection level.
70>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\LibraryPath.vb(39,41): error BC30451: 'Autodesk' is not declared. It may be inaccessible due to its protection level.
70>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\LibraryPath.vb(40,39): error BC30451: 'Autodesk' is not declared. It may be inaccessible due to its protection level.
70>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\LoadFamily.vb(34,9): error BC40056: Namespace or type specified in the Imports 'Autodesk.Revit' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.
70>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\LoadFamily.vb(35,9): error BC40056: Namespace or type specified in the Imports 'Autodesk.Revit.DB' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.
70>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\LoadFamily.vb(36,9): error BC40056: Namespace or type specified in the Imports 'Autodesk.Revit.UI' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.
70>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\LoadFamily.vb(114,50): error BC30002: Type 'Autodesk.Revit.UI.ExternalCommandData' is not defined.
70>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\LoadFamily.vb(115,48): error BC30002: Type 'Autodesk.Revit.DB.ElementSet' is not defined.
70>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\LoadFamily.vb(116,8): error BC30002: Type 'Autodesk.Revit.UI.Result' is not defined.
70>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\LoadFamily.vb(116,44): error BC30002: Type 'Autodesk.Revit.UI.IExternalCommand' is not defined.
70>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\LoadFamily.vb(161,46): error BC30002: Type 'Autodesk.Revit.ApplicationServices.Application' is not defined.
70>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\LoadFamily.vb(107,16): error BC30002: Type 'Autodesk.Revit.UI.IExternalCommand' is not defined.
70>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\LoadFamily.vb(104,2): error BC30002: Type 'Autodesk.Revit.Attributes.Transaction' is not defined.
70>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\LoadFamily.vb(105,2): error BC30002: Type 'Autodesk.Revit.Attributes.Regeneration' is not defined.
70>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\LoadFamily.vb(104,40): error BC30451: 'Autodesk' is not declared. It may be inaccessible due to its protection level.
70>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\LoadFamily.vb(105,41): error BC30451: 'Autodesk' is not declared. It may be inaccessible due to its protection level.
70>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\LoadFamily.vb(66,50): error BC30002: Type 'Autodesk.Revit.UI.ExternalCommandData' is not defined.
70>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\LoadFamily.vb(67,48): error BC30002: Type 'Autodesk.Revit.DB.ElementSet' is not defined.
70>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\LoadFamily.vb(68,8): error BC30002: Type 'Autodesk.Revit.UI.Result' is not defined.
70>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\LoadFamily.vb(68,44): error BC30002: Type 'Autodesk.Revit.UI.IExternalCommand' is not defined.
70>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\LoadFamily.vb(48,16): error BC30002: Type 'IExternalCommand' is not defined.
70>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\LoadFamily.vb(43,2): error BC30002: Type 'Autodesk.Revit.Attributes.Transaction' is not defined.
70>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\LoadFamily.vb(44,2): error BC30002: Type 'Autodesk.Revit.Attributes.Regeneration' is not defined.
70>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\LoadFamily.vb(45,2): error BC30002: Type 'Autodesk.Revit.Attributes.Journaling' is not defined.
70>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\LoadFamily.vb(43,40): error BC30451: 'Autodesk' is not declared. It may be inaccessible due to its protection level.
70>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\LoadFamily.vb(44,41): error BC30451: 'Autodesk' is not declared. It may be inaccessible due to its protection level.
70>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\LoadFamily.vb(45,39): error BC30451: 'Autodesk' is not declared. It may be inaccessible due to its protection level.
70>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\RvtUtils.vb(24,9): error BC40056: Namespace or type specified in the Imports 'Autodesk.Revit.DB' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.
70>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\RvtUtils.vb(38,51): error BC30002: Type 'Autodesk.Revit.DB.Element' is not defined.
70>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\RvtUtils.vb(48,59): error BC30002: Type 'Autodesk.Revit.DB.Element' is not defined.
70>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\RvtUtils.vb(65,55): error BC30002: Type 'Autodesk.Revit.DB.Element' is not defined.
70>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\RvtUtils.vb(96,64): error BC30002: Type 'Autodesk.Revit.DB.Document' is not defined.
70>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\RvtUtils.vb(97,20): error BC30002: Type 'ParameterSet' is not defined.
70>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\RvtUtils.vb(121,61): error BC30002: Type 'Autodesk.Revit.DB.Document' is not defined.
70>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\RvtUtils.vb(122,19): error BC30002: Type 'Autodesk.Revit.DB.Parameter' is not defined.
70>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\RvtUtils.vb(165,51): error BC30002: Type 'Autodesk.Revit.ApplicationServices.Application' is not defined.
70>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\RvtUtils.vb(166,18): error BC30002: Type 'Autodesk.Revit.DB.Element' is not defined.
70>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\RvtUtils.vb(191,22): error BC30002: Type 'Autodesk.Revit.DB.GeometryElement' is not defined.
70>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\RvtUtils.vb(249,7): error BC30002: Type 'Autodesk.Revit.DB.Solid' is not defined.
70>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\RvtUtils.vb(289,63): error BC30002: Type 'Autodesk.Revit.DB.Curve' is not defined.
70>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\RvtUtils.vb(301,62): error BC30002: Type 'Autodesk.Revit.DB.Mesh' is not defined.
70>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\RvtUtils.vb(313,67): error BC30002: Type 'Autodesk.Revit.DB.XYZ' is not defined.
70>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\RvtUtils.vb(325,53): error BC30002: Type 'Autodesk.Revit.DB.XYZ' is not defined.
70>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\RvtUtils.vb(338,49): error BC30002: Type 'Autodesk.Revit.DB.Element' is not defined.
70>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\Selection.vb(29,9): error BC40056: Namespace or type specified in the Imports 'Autodesk' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.
70>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\Selection.vb(30,9): error BC40056: Namespace or type specified in the Imports 'Autodesk.Revit.DB' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.
70>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\Selection.vb(31,9): error BC40056: Namespace or type specified in the Imports 'Autodesk.Revit.UI' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.
70>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\Selection.vb(58,50): error BC30002: Type 'Autodesk.Revit.UI.ExternalCommandData' is not defined.
70>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\Selection.vb(59,34): error BC30002: Type 'Autodesk.Revit.DB.ElementSet' is not defined.
70>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\Selection.vb(60,8): error BC30002: Type 'Autodesk.Revit.UI.Result' is not defined.
70>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\Selection.vb(60,44): error BC30002: Type 'Autodesk.Revit.UI.IExternalCommand' is not defined.
70>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\Selection.vb(40,16): error BC30002: Type 'Autodesk.Revit.UI.IExternalCommand' is not defined.
70>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\Selection.vb(35,2): error BC30002: Type 'Autodesk.Revit.Attributes.Transaction' is not defined.
70>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\Selection.vb(36,2): error BC30002: Type 'Autodesk.Revit.Attributes.Regeneration' is not defined.
70>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\Selection.vb(37,2): error BC30002: Type 'Autodesk.Revit.Attributes.Journaling' is not defined.
70>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\Selection.vb(35,40): error BC30451: 'Autodesk' is not declared. It may be inaccessible due to its protection level.
70>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\Selection.vb(36,41): error BC30451: 'Autodesk' is not declared. It may be inaccessible due to its protection level.
70>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\Selection.vb(37,39): error BC30451: 'Autodesk' is not declared. It may be inaccessible due to its protection level.
70>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\ShowElementData.vb(29,9): error BC40056: Namespace or type specified in the Imports 'Autodesk' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.
70>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\ShowElementData.vb(30,9): error BC40056: Namespace or type specified in the Imports 'Autodesk.Revit.DB' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.
70>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\ShowElementData.vb(59,50): error BC30002: Type 'Autodesk.Revit.UI.ExternalCommandData' is not defined.
70>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\ShowElementData.vb(60,48): error BC30002: Type 'Autodesk.Revit.DB.ElementSet' is not defined.
70>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\ShowElementData.vb(61,8): error BC30002: Type 'Autodesk.Revit.UI.Result' is not defined.
70>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\ShowElementData.vb(61,44): error BC30002: Type 'Autodesk.Revit.UI.IExternalCommand' is not defined.
70>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\ShowElementData.vb(41,16): error BC30002: Type 'Autodesk.Revit.UI.IExternalCommand' is not defined.
70>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\ShowElementData.vb(36,2): error BC30002: Type 'Autodesk.Revit.Attributes.Transaction' is not defined.
70>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\ShowElementData.vb(37,2): error BC30002: Type 'Autodesk.Revit.Attributes.Regeneration' is not defined.
70>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\ShowElementData.vb(38,2): error BC30002: Type 'Autodesk.Revit.Attributes.Journaling' is not defined.
70>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\ShowElementData.vb(36,40): error BC30451: 'Autodesk' is not declared. It may be inaccessible due to its protection level.
70>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\ShowElementData.vb(37,41): error BC30451: 'Autodesk' is not declared. It may be inaccessible due to its protection level.
70>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RevitCommands\VB.NET\ShowElementData.vb(38,39): error BC30451: 'Autodesk' is not declared. It may be inaccessible due to its protection level.
71>------ Rebuild All started: Project: ShaftHolePuncher, Configuration: Debug Any CPU ------
69>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
69>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
69>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
69>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\LoadCaseDeal.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
69>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\LoadCaseDeal.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
69>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\LoadCaseDeal.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
69>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\LoadCaseDeal.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
69>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\LoadCaseDeal.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
69>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\LoadCaseMap.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
69>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\LoadCaseMap.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
69>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\LoadCaseMap.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
69>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\LoadCaseMap.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
69>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\LoadCaseTabPage.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
69>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\LoadCombinationDeal.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
69>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\LoadCombinationDeal.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
69>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\LoadCombinationDeal.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
69>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\LoadCombinationDeal.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
69>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\LoadCombinationDeal.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
69>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\LoadCombinationMap.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
69>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\LoadCombinationMap.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
69>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\LoadCombinationMap.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
69>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\LoadCombinationMap.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
69>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\LoadCombinationsTabPage.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
69>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\LoadCombinationUsageMap.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
69>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\Loads.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
69>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\Loads.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
69>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\Loads.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
69>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\Loads.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
69>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\Loads.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
69>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\LoadCaseDeal.cs(43,9,43,17): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
69>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\LoadCaseMap.cs(77,16,77,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
69>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\LoadCaseMap.cs(93,16,93,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
69>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\LoadCaseMap.cs(110,29,110,37): error CS0246: The type or namespace name 'LoadCase' could not be found (are you missing a using directive or an assembly reference?)
69>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\LoadCaseMap.cs(41,9,41,17): error CS0246: The type or namespace name 'LoadCase' could not be found (are you missing a using directive or an assembly reference?)
69>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\LoadCaseMap.cs(44,9,44,17): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
69>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\LoadCaseMap.cs(45,9,45,17): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
69>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\LoadCaseMap.cs(148,31,148,41): error CS0246: The type or namespace name 'LoadNature' could not be found (are you missing a using directive or an assembly reference?)
69>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\LoadCaseMap.cs(125,9,125,19): error CS0246: The type or namespace name 'LoadNature' could not be found (are you missing a using directive or an assembly reference?)
69>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\LoadCombinationDeal.cs(384,17,384,26): error CS0246: The type or namespace name 'LoadUsage' could not be found (are you missing a using directive or an assembly reference?)
69>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\LoadCombinationDeal.cs(403,17,403,25): error CS0246: The type or namespace name 'LoadCase' could not be found (are you missing a using directive or an assembly reference?)
69>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\LoadCombinationDeal.cs(44,9,44,17): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
69>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\LoadCombinationDeal.cs(45,9,45,17): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
69>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\LoadCombinationMap.cs(110,35,110,50): error CS0246: The type or namespace name 'LoadCombination' could not be found (are you missing a using directive or an assembly reference?)
69>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\Loads.cs(43,26,43,42): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
69>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\Loads.cs(40,6,40,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
69>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\Loads.cs(41,6,41,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
69>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\Loads.cs(42,6,42,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
69>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\Loads.cs(40,44,40,52): error CS0103: The name 'Autodesk' does not exist in the current context
69>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\Loads.cs(41,45,41,53): error CS0103: The name 'Autodesk' does not exist in the current context
69>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\Loads.cs(42,43,42,51): error CS0103: The name 'Autodesk' does not exist in the current context
69>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\Loads.cs(97,21,97,31): error CS0246: The type or namespace name 'LoadNature' could not be found (are you missing a using directive or an assembly reference?)
69>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\Loads.cs(108,21,108,29): error CS0246: The type or namespace name 'LoadCase' could not be found (are you missing a using directive or an assembly reference?)
69>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\Loads.cs(119,21,119,29): error CS0246: The type or namespace name 'Category' could not be found (are you missing a using directive or an assembly reference?)
69>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\Loads.cs(141,16,141,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
69>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\Loads.cs(163,21,163,30): error CS0246: The type or namespace name 'LoadUsage' could not be found (are you missing a using directive or an assembly reference?)
69>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\Loads.cs(268,49,268,68): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
69>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\Loads.cs(269,73,269,81): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
69>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\Loads.cs(268,16,268,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
69>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\Loads.cs(47,9,47,17): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
69>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\Loads.cs(54,14,54,23): error CS0246: The type or namespace name 'LoadUsage' could not be found (are you missing a using directive or an assembly reference?)
69>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\Loads.cs(62,14,62,22): error CS0246: The type or namespace name 'Category' could not be found (are you missing a using directive or an assembly reference?)
69>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\Loads.cs(63,14,63,22): error CS0246: The type or namespace name 'LoadCase' could not be found (are you missing a using directive or an assembly reference?)
69>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Loads\CS\Loads.cs(64,14,64,24): error CS0246: The type or namespace name 'LoadNature' could not be found (are you missing a using directive or an assembly reference?)
72>------ Rebuild All started: Project: StructSample, Configuration: Debug Any CPU ------
71>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
71>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
71>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
71>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\Command.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
71>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\Command.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
71>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\Command.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
71>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\Command.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
71>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\MathTools.cs(25,7,25,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
71>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\Profile.cs(25,7,25,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
71>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\Profile.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
71>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\Profile.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
71>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\Profile.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
71>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\ProfileBeam.cs(25,7,25,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
71>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\ProfileBeam.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
71>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\ProfileBeam.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
71>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\ProfileFloor.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
71>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\ProfileFloor.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
71>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\ProfileFloor.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
71>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\ProfileNull.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
71>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\ProfileNull.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
71>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\ProfileNull.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
71>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\ProfileWall.cs(25,7,25,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
71>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\ProfileWall.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
71>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\ProfileWall.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
71>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\ShaftHolePuncherForm.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
71>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\ShaftHolePuncherForm.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
71>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\Command.cs(40,28,40,44): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
71>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\Command.cs(37,6,37,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
71>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\Command.cs(38,6,38,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
71>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\Command.cs(39,6,39,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
71>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\Command.cs(37,44,37,52): error CS0103: The name 'Autodesk' does not exist in the current context
71>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\Command.cs(38,45,38,53): error CS0103: The name 'Autodesk' does not exist in the current context
71>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\Command.cs(39,43,39,51): error CS0103: The name 'Autodesk' does not exist in the current context
71>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\Command.cs(59,49,59,68): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
71>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\Command.cs(60,33,60,41): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
71>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\Command.cs(59,16,59,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
71>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\MathTools.cs(114,24,114,32): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
71>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\Profile.cs(88,23,88,30): error CS0246: The type or namespace name 'Opening' could not be found (are you missing a using directive or an assembly reference?)
71>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\Profile.cs(95,62,95,66): error CS0246: The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)
71>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\Profile.cs(95,32,95,35): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
71>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\Profile.cs(146,48,146,56): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
71>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\Profile.cs(146,32,146,36): error CS0246: The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)
71>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\Profile.cs(189,41,189,45): error CS0246: The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)
71>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\Profile.cs(76,25,76,44): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
71>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\Profile.cs(42,27,42,30): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
71>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\Profile.cs(45,17,45,25): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
71>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\Profile.cs(48,17,48,25): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
71>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\Profile.cs(51,17,51,25): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
71>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\ProfileBeam.cs(70,63,70,67): error CS0246: The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)
71>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\ProfileBeam.cs(70,33,70,36): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
71>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\ProfileBeam.cs(185,49,185,57): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
71>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\ProfileBeam.cs(185,33,185,37): error CS0246: The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)
71>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\ProfileBeam.cs(265,23,265,30): error CS0246: The type or namespace name 'Opening' could not be found (are you missing a using directive or an assembly reference?)
71>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\ProfileBeam.cs(55,26,55,40): error CS0246: The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)
71>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\ProfileBeam.cs(55,47,55,66): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
71>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\ProfileBeam.cs(39,15,39,29): error CS0246: The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)
71>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\ProfileBeam.cs(41,7,41,16): error CS0246: The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)
71>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\ProfileFloor.cs(62,63,62,67): error CS0246: The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)
71>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\ProfileFloor.cs(62,33,62,36): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
71>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\ProfileFloor.cs(107,23,107,30): error CS0246: The type or namespace name 'Opening' could not be found (are you missing a using directive or an assembly reference?)
71>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\ProfileFloor.cs(47,27,47,32): error CS0246: The type or namespace name 'Floor' could not be found (are you missing a using directive or an assembly reference?)
71>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\ProfileFloor.cs(47,40,47,59): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
71>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\ProfileFloor.cs(40,15,40,20): error CS0246: The type or namespace name 'Floor' could not be found (are you missing a using directive or an assembly reference?)
71>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\ProfileNull.cs(180,23,180,30): error CS0246: The type or namespace name 'Opening' could not be found (are you missing a using directive or an assembly reference?)
71>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\ProfileNull.cs(64,26,64,45): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
71>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\ProfileNull.cs(41,7,41,12): error CS0246: The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)
71>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\ProfileNull.cs(42,7,42,12): error CS0246: The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)
71>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\ProfileWall.cs(61,65,61,69): error CS0246: The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)
71>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\ProfileWall.cs(61,35,61,38): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
71>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\ProfileWall.cs(151,25,151,32): error CS0246: The type or namespace name 'Opening' could not be found (are you missing a using directive or an assembly reference?)
71>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\ProfileWall.cs(46,28,46,32): error CS0246: The type or namespace name 'Wall' could not be found (are you missing a using directive or an assembly reference?)
71>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\ProfileWall.cs(46,39,46,58): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
71>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ShaftHolePuncher\CS\ProfileWall.cs(39,17,39,21): error CS0246: The type or namespace name 'Wall' could not be found (are you missing a using directive or an assembly reference?)
73>------ Rebuild All started: Project: TagBeam, Configuration: Debug Any CPU ------
72>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
72>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
72>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
72>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructSample\CS\Command.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
72>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructSample\CS\Command.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
72>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructSample\CS\Command.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
72>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructSample\CS\Command.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
72>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructSample\CS\Command.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
72>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructSample\CS\Command.cs(49,27,49,43): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
72>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructSample\CS\Command.cs(46,5,46,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
72>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructSample\CS\Command.cs(47,5,47,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
72>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructSample\CS\Command.cs(48,5,48,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
72>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructSample\CS\Command.cs(46,43,46,51): error CS0103: The name 'Autodesk' does not exist in the current context
72>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructSample\CS\Command.cs(47,44,47,52): error CS0103: The name 'Autodesk' does not exist in the current context
72>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructSample\CS\Command.cs(48,42,48,50): error CS0103: The name 'Autodesk' does not exist in the current context
72>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructSample\CS\Command.cs(68,47,68,66): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
72>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructSample\CS\Command.cs(68,100,68,108): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
72>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructSample\CS\Command.cs(68,14,68,22): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
72>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructSample\CS\Command.cs(143,45,143,53): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
72>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructSample\CS\Command.cs(143,15,143,27): error CS0246: The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)
72>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructSample\CS\Command.cs(178,30,178,38): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
72>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructSample\CS\Command.cs(178,85,178,93): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
72>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructSample\CS\Command.cs(179,27,179,35): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
72>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructSample\CS\Command.cs(239,32,239,40): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
72>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructSample\CS\Command.cs(239,87,239,95): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
72>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructSample\CS\Command.cs(239,104,239,112): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
72>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructSample\CS\Command.cs(240,25,240,37): error CS0246: The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)
72>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructSample\CS\Command.cs(240,50,240,58): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
72>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StructSample\CS\Command.cs(240,91,240,99): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
74>------ Rebuild All started: Project: TypeSelector, Configuration: Debug Any CPU ------
74>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
74>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
74>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TypeSelector\VB.NET\Command.vb(26,9): error BC40056: Namespace or type specified in the Imports 'Autodesk.Revit.DB' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.
74>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TypeSelector\VB.NET\Command.vb(54,49): error BC30002: Type 'Autodesk.Revit.UI.ExternalCommandData' is not defined.
74>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TypeSelector\VB.NET\Command.vb(55,47): error BC30002: Type 'Autodesk.Revit.DB.ElementSet' is not defined.
74>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TypeSelector\VB.NET\Command.vb(55,80): error BC30002: Type 'Autodesk.Revit.UI.Result' is not defined.
74>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TypeSelector\VB.NET\Command.vb(56,15): error BC30002: Type 'Autodesk.Revit.UI.IExternalCommand' is not defined.
74>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TypeSelector\VB.NET\Command.vb(36,15): error BC30002: Type 'Autodesk.Revit.UI.IExternalCommand' is not defined.
74>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TypeSelector\VB.NET\Command.vb(32,2): error BC30002: Type 'Autodesk.Revit.Attributes.Transaction' is not defined.
74>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TypeSelector\VB.NET\Command.vb(33,2): error BC30002: Type 'Autodesk.Revit.Attributes.Regeneration' is not defined.
74>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TypeSelector\VB.NET\Command.vb(34,2): error BC30002: Type 'Autodesk.Revit.Attributes.Journaling' is not defined.
74>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TypeSelector\VB.NET\Command.vb(32,40): error BC30451: 'Autodesk' is not declared. It may be inaccessible due to its protection level.
74>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TypeSelector\VB.NET\Command.vb(33,41): error BC30451: 'Autodesk' is not declared. It may be inaccessible due to its protection level.
74>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TypeSelector\VB.NET\Command.vb(34,39): error BC30451: 'Autodesk' is not declared. It may be inaccessible due to its protection level.
74>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TypeSelector\VB.NET\TypeSelectorWindow.vb(123,27): error BC30002: Type 'Autodesk.Revit.DB.Document' is not defined.
74>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TypeSelector\VB.NET\TypeSelectorWindow.vb(124,28): error BC30002: Type 'Autodesk.Revit.DB.ElementId' is not defined.
74>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TypeSelector\VB.NET\TypeSelectorWindow.vb(125,24): error BC30002: Type 'Autodesk.Revit.UI.Result' is not defined.
74>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TypeSelector\VB.NET\TypeSelectorWindow.vb(134,45): error BC30002: Type 'Autodesk.Revit.DB.Document' is not defined.
74>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TypeSelector\VB.NET\TypeSelectorWindow.vb(134,90): error BC30002: Type 'Autodesk.Revit.DB.Element' is not defined.
75>------ Rebuild All started: Project: AddSpaceAndZone, Configuration: Debug Any CPU ------
73>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
73>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
73>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
73>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TagBeam\CS\Command.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
73>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TagBeam\CS\Command.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
73>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TagBeam\CS\Command.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
73>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TagBeam\CS\Command.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
73>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TagBeam\CS\FamilySymbolWrapper.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
73>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TagBeam\CS\TagBeamData.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
73>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TagBeam\CS\TagBeamData.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
73>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TagBeam\CS\TagBeamData.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
73>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TagBeam\CS\TagBeamData.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
73>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TagBeam\CS\TagBeamForm.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
73>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TagBeam\CS\TagBeamForm.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
73>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TagBeam\CS\Command.cs(40,28,40,44): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
73>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TagBeam\CS\Command.cs(38,6,38,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
73>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TagBeam\CS\Command.cs(39,6,39,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
73>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TagBeam\CS\Command.cs(38,44,38,52): error CS0103: The name 'Autodesk' does not exist in the current context
73>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TagBeam\CS\Command.cs(39,43,39,51): error CS0103: The name 'Autodesk' does not exist in the current context
73>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TagBeam\CS\Command.cs(60,13,60,32): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
73>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TagBeam\CS\Command.cs(62,13,62,23): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
73>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TagBeam\CS\Command.cs(59,16,59,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
73>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TagBeam\CS\Command.cs(91,29,91,45): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
73>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TagBeam\CS\Command.cs(90,6,90,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
73>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TagBeam\CS\Command.cs(90,44,90,52): error CS0103: The name 'Autodesk' does not exist in the current context
73>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TagBeam\CS\Command.cs(94,11,94,30): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
73>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TagBeam\CS\Command.cs(96,11,96,21): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
73>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TagBeam\CS\Command.cs(93,16,93,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
73>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TagBeam\CS\Command.cs(136,31,136,47): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
73>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TagBeam\CS\Command.cs(135,6,135,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
73>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TagBeam\CS\Command.cs(135,44,135,52): error CS0103: The name 'Autodesk' does not exist in the current context
73>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TagBeam\CS\Command.cs(139,11,139,30): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
73>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TagBeam\CS\Command.cs(141,11,141,21): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
73>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TagBeam\CS\Command.cs(138,16,138,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
73>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TagBeam\CS\FamilySymbolWrapper.cs(40,16,40,28): error CS0246: The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)
73>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TagBeam\CS\FamilySymbolWrapper.cs(57,36,57,48): error CS0246: The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)
73>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TagBeam\CS\FamilySymbolWrapper.cs(35,9,35,21): error CS0246: The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)
73>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TagBeam\CS\TagBeamData.cs(148,47,148,54): error CS0246: The type or namespace name 'TagMode' could not be found (are you missing a using directive or an assembly reference?)
73>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TagBeam\CS\TagBeamData.cs(173,31,173,38): error CS0246: The type or namespace name 'TagMode' could not be found (are you missing a using directive or an assembly reference?)
73>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TagBeam\CS\TagBeamData.cs(175,13,175,27): error CS0246: The type or namespace name 'TagOrientation' could not be found (are you missing a using directive or an assembly reference?)
73>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TagBeam\CS\TagBeamData.cs(73,28,73,47): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
73>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TagBeam\CS\TagBeamData.cs(41,17,41,25): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
73>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TagBeam\CS\TagBeamData.cs(42,17,42,25): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
73>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TagBeam\CS\TagBeamData.cs(43,17,43,27): error CS0246: The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)
73>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TagBeam\CS\TagBeamData.cs(47,22,47,36): error CS0246: The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)
76>------ Rebuild All started: Project: NewRebar, Configuration: Debug Any CPU ------
75>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
75>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
75>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
75>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\Command.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
75>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\Command.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
75>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\Command.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
75>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\DataManager.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
75>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\DataManager.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
75>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\DataManager.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
75>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\DataManager.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
75>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\MainForm.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
75>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\MainForm.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
75>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\SpaceItem.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
75>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\SpaceItem.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
75>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\SpaceManager.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
75>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\SpaceManager.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
75>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\SpaceManager.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
75>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\SpaceManager.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
75>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\SpaceNode.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
75>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\SpaceNode.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
75>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\ZoneEditorForm.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
75>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\ZoneEditorForm.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
75>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\ZoneEditorForm.Designer.cs(22,7,22,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
75>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\ZoneNode.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
75>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\ZoneNode.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
75>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\ZoneManager.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
75>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\ZoneManager.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
75>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\ZoneManager.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
75>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\ZoneManager.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
75>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\Command.cs(39,28,39,44): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
75>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\Command.cs(36,6,36,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
75>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\Command.cs(37,6,37,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
75>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\Command.cs(38,6,38,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
75>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\Command.cs(36,44,36,52): error CS0103: The name 'Autodesk' does not exist in the current context
75>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\Command.cs(37,45,37,53): error CS0103: The name 'Autodesk' does not exist in the current context
75>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\Command.cs(38,43,38,51): error CS0103: The name 'Autodesk' does not exist in the current context
75>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\Command.cs(57,49,57,57): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
75>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\Command.cs(59,48,59,58): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
75>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\Command.cs(57,16,57,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
75>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\DataManager.cs(114,35,114,40): error CS0246: The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)
75>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\DataManager.cs(174,21,174,26): error CS0246: The type or namespace name 'Space' could not be found (are you missing a using directive or an assembly reference?)
75>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\DataManager.cs(183,21,183,25): error CS0246: The type or namespace name 'Zone' could not be found (are you missing a using directive or an assembly reference?)
75>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\DataManager.cs(192,28,192,33): error CS0246: The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)
75>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\DataManager.cs(50,28,50,47): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
75>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\DataManager.cs(39,9,39,28): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
75>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\DataManager.cs(40,14,40,19): error CS0246: The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)
75>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\DataManager.cs(43,9,43,14): error CS0246: The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)
75>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\DataManager.cs(44,9,44,14): error CS0246: The type or namespace name 'Phase' could not be found (are you missing a using directive or an assembly reference?)
75>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\MainForm.cs(117,29,117,34): error CS0246: The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)
75>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\SpaceItem.cs(57,16,57,21): error CS0246: The type or namespace name 'Space' could not be found (are you missing a using directive or an assembly reference?)
75>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\SpaceItem.cs(40,26,40,31): error CS0246: The type or namespace name 'Space' could not be found (are you missing a using directive or an assembly reference?)
75>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\SpaceItem.cs(39,9,39,14): error CS0246: The type or namespace name 'Space' could not be found (are you missing a using directive or an assembly reference?)
75>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\SpaceManager.cs(58,38,58,43): error CS0246: The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)
75>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\SpaceManager.cs(58,21,58,26): error CS0246: The type or namespace name 'Space' could not be found (are you missing a using directive or an assembly reference?)
75>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\SpaceManager.cs(68,34,68,39): error CS0246: The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)
75>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\SpaceManager.cs(68,47,68,52): error CS0246: The type or namespace name 'Phase' could not be found (are you missing a using directive or an assembly reference?)
75>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\SpaceManager.cs(47,29,47,48): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
75>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\SpaceManager.cs(47,75,47,80): error CS0246: The type or namespace name 'Space' could not be found (are you missing a using directive or an assembly reference?)
75>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\SpaceManager.cs(39,9,39,28): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
75>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\SpaceManager.cs(40,30,40,35): error CS0246: The type or namespace name 'Space' could not be found (are you missing a using directive or an assembly reference?)
75>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\SpaceNode.cs(56,16,56,21): error CS0246: The type or namespace name 'Space' could not be found (are you missing a using directive or an assembly reference?)
75>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\SpaceNode.cs(46,26,46,31): error CS0246: The type or namespace name 'Space' could not be found (are you missing a using directive or an assembly reference?)
75>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\SpaceNode.cs(40,9,40,14): error CS0246: The type or namespace name 'Space' could not be found (are you missing a using directive or an assembly reference?)
75>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\ZoneEditorForm.Designer.cs(32,17,32,21): error CS0246: The type or namespace name 'Zone' could not be found (are you missing a using directive or an assembly reference?)
75>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\ZoneNode.cs(56,16,56,20): error CS0246: The type or namespace name 'Zone' could not be found (are you missing a using directive or an assembly reference?)
75>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\ZoneNode.cs(45,25,45,29): error CS0246: The type or namespace name 'Zone' could not be found (are you missing a using directive or an assembly reference?)
75>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\ZoneNode.cs(39,9,39,13): error CS0246: The type or namespace name 'Zone' could not be found (are you missing a using directive or an assembly reference?)
75>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\ZoneManager.cs(59,32,59,37): error CS0246: The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)
75>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\ZoneManager.cs(59,45,59,50): error CS0246: The type or namespace name 'Phase' could not be found (are you missing a using directive or an assembly reference?)
75>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\ZoneManager.cs(72,31,72,39): error CS0246: The type or namespace name 'SpaceSet' could not be found (are you missing a using directive or an assembly reference?)
75>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\ZoneManager.cs(81,34,81,42): error CS0246: The type or namespace name 'SpaceSet' could not be found (are you missing a using directive or an assembly reference?)
75>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\ZoneManager.cs(91,36,91,41): error CS0246: The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)
75>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\ZoneManager.cs(91,21,91,25): error CS0246: The type or namespace name 'Zone' could not be found (are you missing a using directive or an assembly reference?)
75>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\ZoneManager.cs(100,16,100,20): error CS0246: The type or namespace name 'Zone' could not be found (are you missing a using directive or an assembly reference?)
75>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\ZoneManager.cs(48,28,48,47): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
75>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\ZoneManager.cs(48,82,48,86): error CS0246: The type or namespace name 'Zone' could not be found (are you missing a using directive or an assembly reference?)
75>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\ZoneManager.cs(38,9,38,28): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
75>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\ZoneManager.cs(39,30,39,34): error CS0246: The type or namespace name 'Zone' could not be found (are you missing a using directive or an assembly reference?)
75>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\ZoneManager.cs(40,9,40,14): error CS0246: The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)
75>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AddSpaceAndZone\CS\ZoneManager.cs(41,9,41,13): error CS0246: The type or namespace name 'Zone' could not be found (are you missing a using directive or an assembly reference?)
77>------ Rebuild All started: Project: Truss, Configuration: Debug Any CPU ------
76>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
76>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
76>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Forms\AddParameterForm.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeometrySupport.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeometrySupport.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeomUtil.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeomUtil.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\RebarCreator.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\RebarCreator.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\RebarCreator.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\RebarCreator.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\RebarShapeDef\RebarShapeDefByArc.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Command.cs(31,19,31,27): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Command.cs(29,18,29,26): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Command.cs(30,18,30,26): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Command.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Command.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Command.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Command.cs(34,7,34,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Constraints\ConstraintOnArcShape.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Constraints\ConstraintOnSegmentShape.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Forms\NewRebarForm.cs(35,7,35,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Forms\NewRebarForm.cs(36,7,36,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Forms\NewRebarForm.cs(37,7,37,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Forms\NewRebarForm.cs(38,7,38,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Forms\NewRebarShapeForm.cs(34,7,34,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Forms\NewRebarShapeForm.cs(35,7,35,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Forms\NewRebarShapeForm.cs(36,7,36,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Constraints\ConstraintOnRebarShape.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\RebarShapeDef\RebarShapeDef.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\RebarShapeDef\RebarShapeDef.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\RebarShapeDef\RebarShapeDef.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\RebarShapeDef\RebarShapeDefBySegment.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Parameters\RebarShapeParameter.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Parameters\RebarShapeParameter.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Parameters\RebarShapeParameterDouble.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Parameters\RebarShapeParameterFormula.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeometrySupport.cs(35,24,35,32): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeometrySupport.cs(36,10,36,18): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeomUtil.cs(35,20,35,28): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeomUtil.cs(34,21,34,29): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeomUtil.cs(33,23,33,31): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeometrySupport.cs(71,19,71,27): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeometrySupport.cs(190,49,190,57): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeometrySupport.cs(190,17,190,25): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeometrySupport.cs(212,63,212,71): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeometrySupport.cs(212,22,212,30): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeometrySupport.cs(248,19,248,27): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeometrySupport.cs(279,36,279,41): error CS0246: The type or namespace name 'Solid' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeometrySupport.cs(307,40,307,45): error CS0246: The type or namespace name 'Solid' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeometrySupport.cs(307,15,307,19): error CS0246: The type or namespace name 'Face' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeometrySupport.cs(371,43,371,52): error CS0246: The type or namespace name 'EdgeArray' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeometrySupport.cs(371,20,371,24): error CS0246: The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeometrySupport.cs(102,30,102,44): error CS0246: The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeometrySupport.cs(46,17,46,22): error CS0246: The type or namespace name 'Solid' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeometrySupport.cs(51,17,51,21): error CS0246: The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeometrySupport.cs(56,17,56,25): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeometrySupport.cs(61,22,61,26): error CS0246: The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeometrySupport.cs(66,20,66,28): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeometrySupport.cs(80,17,80,26): error CS0246: The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeomUtil.cs(65,34,65,42): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeomUtil.cs(65,63,65,71): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeomUtil.cs(82,37,82,41): error CS0246: The type or namespace name 'Face' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeomUtil.cs(82,48,82,52): error CS0246: The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeomUtil.cs(83,47,83,56): error CS0246: The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeomUtil.cs(83,68,83,77): error CS0246: The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeomUtil.cs(136,42,136,50): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeomUtil.cs(136,74,136,82): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeomUtil.cs(153,46,153,54): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeomUtil.cs(153,78,153,86): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeomUtil.cs(169,54,169,62): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeomUtil.cs(169,21,169,29): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeomUtil.cs(186,38,186,46): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeomUtil.cs(200,50,200,58): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeomUtil.cs(200,76,200,84): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeomUtil.cs(200,21,200,29): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeomUtil.cs(215,50,215,58): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeomUtil.cs(215,76,215,84): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeomUtil.cs(215,21,215,29): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeomUtil.cs(230,58,230,66): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeomUtil.cs(230,21,230,29): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeomUtil.cs(245,58,245,66): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeomUtil.cs(245,87,245,96): error CS0246: The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeomUtil.cs(245,21,245,29): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeomUtil.cs(273,55,273,63): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeomUtil.cs(273,84,273,92): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeomUtil.cs(273,21,273,29): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeomUtil.cs(288,39,288,47): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Geom\GeomUtil.cs(288,65,288,73): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\RebarCreator.cs(68,29,68,48): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\RebarCreator.cs(46,9,46,17): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\RebarCreator.cs(51,9,51,23): error CS0246: The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\RebarCreator.cs(61,9,61,14): error CS0246: The type or namespace name 'Rebar' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\RebarShapeDef\RebarShapeDefByArc.cs(36,35,36,60): error CS0246: The type or namespace name 'RebarShapeDefinitionByArc' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Command.cs(45,28,45,44): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Command.cs(42,6,42,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Command.cs(43,6,43,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Command.cs(44,6,44,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Command.cs(42,44,42,52): error CS0103: The name 'Autodesk' does not exist in the current context
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Command.cs(43,45,43,53): error CS0103: The name 'Autodesk' does not exist in the current context
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Command.cs(44,43,44,51): error CS0103: The name 'Autodesk' does not exist in the current context
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Command.cs(63,49,63,68): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Command.cs(63,102,63,110): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Command.cs(63,16,63,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Constraints\ConstraintOnArcShape.cs(68,19,68,44): error CS0246: The type or namespace name 'RebarShapeDefinitionByArc' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Constraints\ConstraintOnArcShape.cs(137,16,137,42): error CS0246: The type or namespace name 'RebarShapeArcReferenceType' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Constraints\ConstraintOnArcShape.cs(126,17,126,43): error CS0246: The type or namespace name 'RebarShapeArcReferenceType' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Constraints\ConstraintOnArcShape.cs(172,16,172,42): error CS0246: The type or namespace name 'RebarShapeArcReferenceType' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Constraints\ConstraintOnArcShape.cs(161,17,161,43): error CS0246: The type or namespace name 'RebarShapeArcReferenceType' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Constraints\ConstraintOnArcShape.cs(208,16,208,42): error CS0246: The type or namespace name 'RebarShapeArcReferenceType' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Constraints\ConstraintOnArcShape.cs(197,17,197,43): error CS0246: The type or namespace name 'RebarShapeArcReferenceType' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Constraints\ConstraintOnSegmentShape.cs(69,19,69,49): error CS0246: The type or namespace name 'RebarShapeDefinitionBySegments' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Constraints\ConstraintOnSegmentShape.cs(130,16,130,36): error CS0246: The type or namespace name 'RebarShapeVertexTurn' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Constraints\ConstraintOnSegmentShape.cs(145,16,145,35): error CS0246: The type or namespace name 'RebarShapeBendAngle' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Constraints\ConstraintOnSegmentShape.cs(91,17,91,37): error CS0246: The type or namespace name 'RebarShapeVertexTurn' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Constraints\ConstraintOnSegmentShape.cs(96,17,96,36): error CS0246: The type or namespace name 'RebarShapeBendAngle' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Forms\NewRebarForm.cs(106,16,106,28): error CS0246: The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Forms\NewRebarForm.cs(117,16,117,26): error CS0246: The type or namespace name 'RebarShape' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Constraints\ConstraintOnSegmentShape.cs(227,16,227,36): error CS0246: The type or namespace name 'RebarShapeVertexTurn' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Constraints\ConstraintOnSegmentShape.cs(236,16,236,35): error CS0246: The type or namespace name 'RebarShapeBendAngle' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Forms\NewRebarForm.cs(89,29,89,37): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Constraints\ConstraintOnSegmentShape.cs(180,17,180,37): error CS0246: The type or namespace name 'RebarShapeVertexTurn' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Constraints\ConstraintOnSegmentShape.cs(185,17,185,36): error CS0246: The type or namespace name 'RebarShapeBendAngle' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Forms\NewRebarForm.cs(55,9,55,17): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Forms\NewRebarForm.cs(60,14,60,26): error CS0246: The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Forms\NewRebarForm.cs(65,14,65,24): error CS0246: The type or namespace name 'RebarShape' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Parameters\RebarShapeParameter.cs(107,37,107,45): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Parameters\RebarShapeParameter.cs(107,69,107,84): error CS0246: The type or namespace name 'DefinitionGroup' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Parameters\RebarShapeParameterDouble.cs(67,37,67,45): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Parameters\RebarShapeParameterDouble.cs(67,69,67,84): error CS0246: The type or namespace name 'DefinitionGroup' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Forms\NewRebarShapeForm.cs(127,16,127,36): error CS0246: The type or namespace name 'RebarHookOrientation' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Forms\NewRebarShapeForm.cs(139,16,139,36): error CS0246: The type or namespace name 'RebarHookOrientation' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Forms\NewRebarShapeForm.cs(152,17,152,32): error CS0246: The type or namespace name 'DefinitionGroup' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Parameters\RebarShapeParameterFormula.cs(67,37,67,45): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Parameters\RebarShapeParameterFormula.cs(67,69,67,84): error CS0246: The type or namespace name 'DefinitionGroup' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Forms\NewRebarShapeForm.cs(83,34,83,42): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Forms\NewRebarShapeForm.cs(53,17,53,25): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Forms\NewRebarShapeForm.cs(58,17,58,25): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\RebarShapeDef\RebarShapeDef.cs(56,16,56,36): error CS0246: The type or namespace name 'RebarShapeDefinition' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\RebarShapeDef\RebarShapeDef.cs(124,28,124,36): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\RebarShapeDef\RebarShapeDef.cs(124,45,124,60): error CS0246: The type or namespace name 'DefinitionGroup' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\RebarShapeDef\RebarShapeDef.cs(81,30,81,50): error CS0246: The type or namespace name 'RebarShapeDefinition' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\RebarShapeDef\RebarShapeDef.cs(41,19,41,39): error CS0246: The type or namespace name 'RebarShapeDefinition' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\RebarShapeDef\RebarShapeDefBySegment.cs(36,39,36,69): error CS0246: The type or namespace name 'RebarShapeDefinitionBySegments' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Parameters\RebarShapeParameter.cs(70,16,70,25): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Parameters\RebarShapeParameter.cs(88,53,88,68): error CS0246: The type or namespace name 'DefinitionGroup' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Parameters\RebarShapeParameter.cs(88,19,88,37): error CS0246: The type or namespace name 'ExternalDefinition' could not be found (are you missing a using directive or an assembly reference?)
76>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRebar\CS\Parameters\RebarShapeParameter.cs(42,19,42,28): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
78>------ Rebuild All started: Project: APIAppStartup, Configuration: Debug Any CPU ------
77>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
77>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
77>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
77>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\Command.cs(25,7,25,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
77>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\Command.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
77>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\Command.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
77>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\MathTools.cs(25,7,25,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
77>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\TrussForm.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
77>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\TrussForm.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
77>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\TrussForm.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
77>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\TrussForm.cs(34,7,34,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
77>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\TrussGeometry.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
77>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\TrussGeometry.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
77>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\TrussGeometry.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
77>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\TrussGeometry.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
77>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\Command.cs(37,28,37,44): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
77>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\Command.cs(34,6,34,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
77>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\Command.cs(35,6,35,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
77>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\Command.cs(36,6,36,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
77>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\Command.cs(34,44,34,52): error CS0103: The name 'Autodesk' does not exist in the current context
77>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\Command.cs(35,45,35,53): error CS0103: The name 'Autodesk' does not exist in the current context
77>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\Command.cs(36,43,36,51): error CS0103: The name 'Autodesk' does not exist in the current context
77>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\Command.cs(56,49,56,68): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
77>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\Command.cs(57,33,57,41): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
77>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\Command.cs(56,16,56,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
77>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\MathTools.cs(114,24,114,32): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
77>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\TrussForm.cs(282,16,282,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
77>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\TrussForm.cs(69,26,69,45): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
77>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\TrussForm.cs(47,9,47,28): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
77>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\TrussForm.cs(49,21,49,29): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
77>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\TrussForm.cs(50,21,50,29): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
77>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\TrussForm.cs(52,9,52,18): error CS0246: The type or namespace name 'TrussType' could not be found (are you missing a using directive or an assembly reference?)
77>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\TrussForm.cs(53,9,53,17): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
77>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\TrussForm.cs(57,9,57,17): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
77>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\TrussForm.cs(58,9,58,23): error CS0246: The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)
77>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\TrussForm.cs(59,9,59,21): error CS0246: The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)
77>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\TrussForm.cs(60,9,60,19): error CS0246: The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)
77>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\TrussForm.cs(61,9,61,23): error CS0246: The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)
77>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\TrussForm.cs(62,9,62,23): error CS0246: The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)
77>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\TrussGeometry.cs(126,21,126,24): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
77>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\TrussGeometry.cs(248,16,248,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
77>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\TrussGeometry.cs(315,32,315,51): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
77>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\TrussGeometry.cs(344,53,344,63): error CS0246: The type or namespace name 'CurveArray' could not be found (are you missing a using directive or an assembly reference?)
77>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\TrussGeometry.cs(344,72,344,80): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
77>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\TrussGeometry.cs(542,47,542,66): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
77>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\TrussGeometry.cs(542,16,542,30): error CS0246: The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)
77>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\TrussGeometry.cs(87,30,87,38): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
77>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\TrussGeometry.cs(87,71,87,90): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
77>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\TrussGeometry.cs(45,9,45,17): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
77>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\TrussGeometry.cs(57,14,57,17): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
77>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\TrussGeometry.cs(59,9,59,17): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
77>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\TrussGeometry.cs(75,9,75,28): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
77>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\TrussGeometry.cs(77,9,77,17): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
77>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Truss\CS\TrussGeometry.cs(79,9,79,17): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
79>------ Rebuild All started: Project: AutoTagRooms, Configuration: Debug Any CPU ------
78>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
78>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
78>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
78>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\APIAppStartup\CS\AppSample.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
78>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\APIAppStartup\CS\AppSample.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
78>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\APIAppStartup\CS\AppSample.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
78>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\APIAppStartup\CS\AppSample.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
78>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\APIAppStartup\CS\AppSample.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
78>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\APIAppStartup\CS\AppSample.cs(40,29,40,49): error CS0246: The type or namespace name 'IExternalApplication' could not be found (are you missing a using directive or an assembly reference?)
78>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\APIAppStartup\CS\AppSample.cs(37,5,37,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
78>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\APIAppStartup\CS\AppSample.cs(38,5,38,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
78>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\APIAppStartup\CS\AppSample.cs(39,5,39,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
78>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\APIAppStartup\CS\AppSample.cs(37,43,37,51): error CS0103: The name 'Autodesk' does not exist in the current context
78>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\APIAppStartup\CS\AppSample.cs(38,44,38,52): error CS0103: The name 'Autodesk' does not exist in the current context
78>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\APIAppStartup\CS\AppSample.cs(39,42,39,50): error CS0103: The name 'Autodesk' does not exist in the current context
78>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\APIAppStartup\CS\AppSample.cs(44,50,44,73): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
78>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\APIAppStartup\CS\AppSample.cs(44,14,44,22): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
78>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\APIAppStartup\CS\AppSample.cs(50,50,50,73): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
78>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\APIAppStartup\CS\AppSample.cs(50,15,50,23): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
80>------ Rebuild All started: Project: CurtainWallGrid, Configuration: Debug Any CPU ------
79>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
79>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
79>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
79>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoTagRooms\CS\Command.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
79>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoTagRooms\CS\Command.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
79>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoTagRooms\CS\Command.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
79>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoTagRooms\CS\RoomsData.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
79>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoTagRooms\CS\RoomsData.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
79>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoTagRooms\CS\RoomsData.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
79>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoTagRooms\CS\RoomsData.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
79>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoTagRooms\CS\RoomsData.cs(34,7,34,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
79>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoTagRooms\CS\AutoTagRoomsForm.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
79>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoTagRooms\CS\AutoTagRoomsForm.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
79>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoTagRooms\CS\Command.cs(39,28,39,44): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
79>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoTagRooms\CS\Command.cs(36,6,36,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
79>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoTagRooms\CS\Command.cs(37,6,37,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
79>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoTagRooms\CS\Command.cs(38,6,38,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
79>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoTagRooms\CS\Command.cs(36,44,36,52): error CS0103: The name 'Autodesk' does not exist in the current context
79>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoTagRooms\CS\Command.cs(37,45,37,53): error CS0103: The name 'Autodesk' does not exist in the current context
79>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoTagRooms\CS\Command.cs(38,43,38,51): error CS0103: The name 'Autodesk' does not exist in the current context
79>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoTagRooms\CS\Command.cs(57,49,57,57): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
79>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoTagRooms\CS\Command.cs(59,48,59,58): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
79>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoTagRooms\CS\Command.cs(57,16,57,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
79>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoTagRooms\CS\RoomsData.cs(69,35,69,39): error CS0246: The type or namespace name 'Room' could not be found (are you missing a using directive or an assembly reference?)
79>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoTagRooms\CS\RoomsData.cs(80,35,80,40): error CS0246: The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)
79>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoTagRooms\CS\RoomsData.cs(91,35,91,46): error CS0246: The type or namespace name 'RoomTagType' could not be found (are you missing a using directive or an assembly reference?)
79>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoTagRooms\CS\RoomsData.cs(161,34,161,39): error CS0246: The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)
79>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoTagRooms\CS\RoomsData.cs(161,47,161,58): error CS0246: The type or namespace name 'RoomTagType' could not be found (are you missing a using directive or an assembly reference?)
79>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoTagRooms\CS\RoomsData.cs(193,33,193,37): error CS0246: The type or namespace name 'Room' could not be found (are you missing a using directive or an assembly reference?)
79>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoTagRooms\CS\RoomsData.cs(193,44,193,55): error CS0246: The type or namespace name 'RoomTagType' could not be found (are you missing a using directive or an assembly reference?)
79>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoTagRooms\CS\RoomsData.cs(58,26,58,45): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
79>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoTagRooms\CS\RoomsData.cs(44,9,44,22): error CS0246: The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)
79>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoTagRooms\CS\RoomsData.cs(46,14,46,19): error CS0246: The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)
79>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoTagRooms\CS\RoomsData.cs(48,14,48,18): error CS0246: The type or namespace name 'Room' could not be found (are you missing a using directive or an assembly reference?)
79>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoTagRooms\CS\RoomsData.cs(50,14,50,25): error CS0246: The type or namespace name 'RoomTagType' could not be found (are you missing a using directive or an assembly reference?)
79>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoTagRooms\CS\RoomsData.cs(52,30,52,37): error CS0246: The type or namespace name 'RoomTag' could not be found (are you missing a using directive or an assembly reference?)
81>------ Rebuild All started: Project: PowerCircuit, Configuration: Debug Any CPU ------
80>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
80>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
80>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\Command.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\Command.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\Command.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\GridCoordinates.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\GridCoordinates.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\MyDocument.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\MyDocument.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\MyDocument.cs(34,7,34,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\GridDrawing.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\GridDrawing.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\GridForm.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\GridForm.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\GridGeometry.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\GridGeometry.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\GridGeometry.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\GridProperties.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\GridProperties.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\MathTools.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\Unit.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\Unit.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\Utility.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\Utility.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\WallGeometry.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\WallGeometry.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\Command.cs(39,20,39,36): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\Command.cs(36,5,36,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\Command.cs(37,5,37,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\Command.cs(38,5,38,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\Command.cs(36,43,36,51): error CS0103: The name 'Autodesk' does not exist in the current context
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\Command.cs(37,44,37,52): error CS0103: The name 'Autodesk' does not exist in the current context
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\Command.cs(38,42,38,50): error CS0103: The name 'Autodesk' does not exist in the current context
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\Command.cs(61,47,61,66): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\Command.cs(61,100,61,108): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\Command.cs(61,14,61,22): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\MyDocument.cs(49,16,49,35): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\MyDocument.cs(62,16,62,26): error CS0246: The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\MyDocument.cs(75,16,75,24): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\MyDocument.cs(116,21,116,29): error CS0246: The type or namespace name 'WallType' could not be found (are you missing a using directive or an assembly reference?)
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\MyDocument.cs(127,21,127,29): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\MyDocument.cs(149,16,149,20): error CS0246: The type or namespace name 'Wall' could not be found (are you missing a using directive or an assembly reference?)
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\MyDocument.cs(202,16,202,27): error CS0246: The type or namespace name 'ForgeTypeId' could not be found (are you missing a using directive or an assembly reference?)
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\MyDocument.cs(243,27,243,46): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\MyDocument.cs(45,9,45,28): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\MyDocument.cs(58,9,58,19): error CS0246: The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\MyDocument.cs(71,9,71,17): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\MyDocument.cs(84,14,84,22): error CS0246: The type or namespace name 'WallType' could not be found (are you missing a using directive or an assembly reference?)
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\MyDocument.cs(87,14,87,22): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\MyDocument.cs(93,9,93,13): error CS0246: The type or namespace name 'Wall' could not be found (are you missing a using directive or an assembly reference?)
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\MyDocument.cs(105,9,105,20): error CS0246: The type or namespace name 'ForgeTypeId' could not be found (are you missing a using directive or an assembly reference?)
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\MyDocument.cs(330,54,330,61): error CS0246: The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\MyDocument.cs(349,71,349,79): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\GridDrawing.cs(1080,44,1080,59): error CS0246: The type or namespace name 'CurtainGridLine' could not be found (are you missing a using directive or an assembly reference?)
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\GridDrawing.cs(1115,59,1115,69): error CS0246: The type or namespace name 'CurveArray' could not be found (are you missing a using directive or an assembly reference?)
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\GridDrawing.cs(1192,57,1192,67): error CS0246: The type or namespace name 'CurveArray' could not be found (are you missing a using directive or an assembly reference?)
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\GridGeometry.cs(84,16,84,27): error CS0246: The type or namespace name 'CurtainGrid' could not be found (are you missing a using directive or an assembly reference?)
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\GridGeometry.cs(106,16,106,27): error CS0246: The type or namespace name 'MullionType' could not be found (are you missing a using directive or an assembly reference?)
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\GridGeometry.cs(121,21,121,36): error CS0246: The type or namespace name 'CurtainGridLine' could not be found (are you missing a using directive or an assembly reference?)
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\GridGeometry.cs(132,21,132,36): error CS0246: The type or namespace name 'CurtainGridLine' could not be found (are you missing a using directive or an assembly reference?)
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\GridGeometry.cs(143,21,143,29): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\GridGeometry.cs(162,16,162,31): error CS0246: The type or namespace name 'CurtainGridLine' could not be found (are you missing a using directive or an assembly reference?)
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\MathTools.cs(119,22,119,30): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\GridGeometry.cs(1034,67,1034,78): error CS0246: The type or namespace name 'CurtainCell' could not be found (are you missing a using directive or an assembly reference?)
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\GridGeometry.cs(1034,22,1034,30): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\GridGeometry.cs(1074,47,1074,55): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\GridGeometry.cs(1074,82,1074,90): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\GridGeometry.cs(1074,116,1074,124): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\GridGeometry.cs(1128,53,1128,64): error CS0246: The type or namespace name 'CurtainCell' could not be found (are you missing a using directive or an assembly reference?)
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\GridGeometry.cs(1128,77,1128,85): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\GridGeometry.cs(1128,111,1128,119): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\GridGeometry.cs(47,17,47,28): error CS0246: The type or namespace name 'CurtainGrid' could not be found (are you missing a using directive or an assembly reference?)
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\GridGeometry.cs(53,17,53,36): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\GridGeometry.cs(56,17,56,25): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\GridGeometry.cs(59,17,59,28): error CS0246: The type or namespace name 'MullionType' could not be found (are you missing a using directive or an assembly reference?)
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\GridGeometry.cs(62,22,62,37): error CS0246: The type or namespace name 'CurtainGridLine' could not be found (are you missing a using directive or an assembly reference?)
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\GridGeometry.cs(65,22,65,37): error CS0246: The type or namespace name 'CurtainGridLine' could not be found (are you missing a using directive or an assembly reference?)
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\GridGeometry.cs(68,22,68,30): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\GridGeometry.cs(74,17,74,32): error CS0246: The type or namespace name 'CurtainGridLine' could not be found (are you missing a using directive or an assembly reference?)
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\Unit.cs(52,42,52,53): error CS0246: The type or namespace name 'ForgeTypeId' could not be found (are you missing a using directive or an assembly reference?)
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\Unit.cs(69,54,69,65): error CS0246: The type or namespace name 'ForgeTypeId' could not be found (are you missing a using directive or an assembly reference?)
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\Unit.cs(83,46,83,57): error CS0246: The type or namespace name 'ForgeTypeId' could not be found (are you missing a using directive or an assembly reference?)
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\Unit.cs(96,41,96,52): error CS0246: The type or namespace name 'ForgeTypeId' could not be found (are you missing a using directive or an assembly reference?)
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\Utility.cs(36,39,36,47): error CS0246: The type or namespace name 'WallType' could not be found (are you missing a using directive or an assembly reference?)
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\Utility.cs(52,26,52,34): error CS0246: The type or namespace name 'WallType' could not be found (are you missing a using directive or an assembly reference?)
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\Utility.cs(52,38,52,46): error CS0246: The type or namespace name 'WallType' could not be found (are you missing a using directive or an assembly reference?)
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\Utility.cs(67,35,67,43): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\Utility.cs(83,26,83,34): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\Utility.cs(83,52,83,60): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\WallGeometry.cs(91,14,91,22): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\WallGeometry.cs(106,14,106,22): error CS0246: The type or namespace name 'WallType' could not be found (are you missing a using directive or an assembly reference?)
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\WallGeometry.cs(136,14,136,22): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\WallGeometry.cs(166,14,166,22): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\WallGeometry.cs(200,14,200,18): error CS0246: The type or namespace name 'Wall' could not be found (are you missing a using directive or an assembly reference?)
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\WallGeometry.cs(47,7,47,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\WallGeometry.cs(50,7,50,15): error CS0246: The type or namespace name 'WallType' could not be found (are you missing a using directive or an assembly reference?)
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\WallGeometry.cs(56,7,56,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
80>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainWallGrid\CS\WallGeometry.cs(62,7,62,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
82>------ Rebuild All started: Project: PlaceFamilyInstanceByFace, Configuration: Debug Any CPU ------
82>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
82>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
82>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
82>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlaceFamilyInstanceByFace\CS\Command.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
82>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlaceFamilyInstanceByFace\CS\Command.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
82>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlaceFamilyInstanceByFace\CS\Command.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
82>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlaceFamilyInstanceByFace\CS\FamilyInstanceCreator.cs(34,22,34,30): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
82>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlaceFamilyInstanceByFace\CS\FamilyInstanceCreator.cs(33,20,33,28): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
82>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlaceFamilyInstanceByFace\CS\FamilyInstanceCreator.cs(32,21,32,29): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
82>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlaceFamilyInstanceByFace\CS\FamilyInstanceCreator.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
82>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlaceFamilyInstanceByFace\CS\FamilyInstanceCreator.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
82>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlaceFamilyInstanceByFace\CS\FamilyInstanceCreator.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
82>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlaceFamilyInstanceByFace\CS\PlaceFamilyInstanceForm.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
82>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlaceFamilyInstanceByFace\CS\PointUserControl.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
82>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlaceFamilyInstanceByFace\CS\FamilyInstanceCreator.cs(75,14,75,24): error CS0246: The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)
82>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlaceFamilyInstanceByFace\CS\FamilyInstanceCreator.cs(86,19,86,23): error CS0246: The type or namespace name 'Face' could not be found (are you missing a using directive or an assembly reference?)
82>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlaceFamilyInstanceByFace\CS\FamilyInstanceCreator.cs(97,19,97,31): error CS0246: The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)
82>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlaceFamilyInstanceByFace\CS\FamilyInstanceCreator.cs(248,45,248,53): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
82>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlaceFamilyInstanceByFace\CS\FamilyInstanceCreator.cs(248,78,248,86): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
82>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlaceFamilyInstanceByFace\CS\FamilyInstanceCreator.cs(273,44,273,52): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
82>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlaceFamilyInstanceByFace\CS\FamilyInstanceCreator.cs(273,74,273,82): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
82>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlaceFamilyInstanceByFace\CS\FamilyInstanceCreator.cs(340,14,340,28): error CS0246: The type or namespace name 'BoundingBoxXYZ' could not be found (are you missing a using directive or an assembly reference?)
82>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlaceFamilyInstanceByFace\CS\FamilyInstanceCreator.cs(469,57,469,60): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
82>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlaceFamilyInstanceByFace\CS\FamilyInstanceCreator.cs(469,72,469,80): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
82>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlaceFamilyInstanceByFace\CS\FamilyInstanceCreator.cs(469,22,469,30): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
82>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlaceFamilyInstanceByFace\CS\FamilyInstanceCreator.cs(137,36,137,44): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
82>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlaceFamilyInstanceByFace\CS\FamilyInstanceCreator.cs(45,15,45,25): error CS0246: The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)
82>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlaceFamilyInstanceByFace\CS\FamilyInstanceCreator.cs(47,15,47,23): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
82>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlaceFamilyInstanceByFace\CS\FamilyInstanceCreator.cs(51,20,51,24): error CS0246: The type or namespace name 'Face' could not be found (are you missing a using directive or an assembly reference?)
82>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlaceFamilyInstanceByFace\CS\FamilyInstanceCreator.cs(53,20,53,32): error CS0246: The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)
82>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlaceFamilyInstanceByFace\CS\PointUserControl.cs(66,16,66,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
82>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlaceFamilyInstanceByFace\CS\PointUserControl.cs(81,34,81,42): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
82>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlaceFamilyInstanceByFace\CS\Command.cs(40,28,40,44): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
82>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlaceFamilyInstanceByFace\CS\Command.cs(37,6,37,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
82>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlaceFamilyInstanceByFace\CS\Command.cs(38,6,38,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
82>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlaceFamilyInstanceByFace\CS\Command.cs(39,6,39,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
82>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlaceFamilyInstanceByFace\CS\Command.cs(37,44,37,52): error CS0103: The name 'Autodesk' does not exist in the current context
82>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlaceFamilyInstanceByFace\CS\Command.cs(38,45,38,53): error CS0103: The name 'Autodesk' does not exist in the current context
82>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlaceFamilyInstanceByFace\CS\Command.cs(39,43,39,51): error CS0103: The name 'Autodesk' does not exist in the current context
82>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlaceFamilyInstanceByFace\CS\Command.cs(58,49,58,57): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
82>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlaceFamilyInstanceByFace\CS\Command.cs(60,48,60,58): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
82>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlaceFamilyInstanceByFace\CS\Command.cs(58,16,58,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
83>------ Rebuild All started: Project: DoorSwing, Configuration: Debug Any CPU ------
81>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
81>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
81>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
81>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PowerCircuit\CS\Command.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
81>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PowerCircuit\CS\Command.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
81>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PowerCircuit\CS\Command.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
81>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PowerCircuit\CS\ElectricalSystemItem.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
81>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PowerCircuit\CS\ElectricalSystemItem.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
81>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PowerCircuit\CS\ElectricalSystemItem.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
81>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PowerCircuit\CS\CircuitOperationData.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
81>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PowerCircuit\CS\CircuitOperationData.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
81>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PowerCircuit\CS\CircuitOperationData.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
81>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PowerCircuit\CS\CircuitOperationData.cs(34,7,34,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
81>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PowerCircuit\CS\CircuitOperationData.cs(35,7,35,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
81>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PowerCircuit\CS\Command.cs(44,28,44,44): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
81>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PowerCircuit\CS\Command.cs(41,6,41,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
81>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PowerCircuit\CS\Command.cs(42,6,42,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
81>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PowerCircuit\CS\Command.cs(43,6,43,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
81>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PowerCircuit\CS\Command.cs(41,44,41,52): error CS0103: The name 'Autodesk' does not exist in the current context
81>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PowerCircuit\CS\Command.cs(42,45,42,53): error CS0103: The name 'Autodesk' does not exist in the current context
81>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PowerCircuit\CS\Command.cs(43,43,43,51): error CS0103: The name 'Autodesk' does not exist in the current context
81>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PowerCircuit\CS\Command.cs(62,49,62,68): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
81>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PowerCircuit\CS\Command.cs(63,29,63,37): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
81>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PowerCircuit\CS\Command.cs(62,16,62,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
81>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PowerCircuit\CS\ElectricalSystemItem.cs(52,16,52,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
81>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PowerCircuit\CS\ElectricalSystemItem.cs(75,37,75,53): error CS0246: The type or namespace name 'ElectricalSystem' could not be found (are you missing a using directive or an assembly reference?)
81>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PowerCircuit\CS\ElectricalSystemItem.cs(47,17,47,25): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
81>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PowerCircuit\CS\CircuitOperationData.cs(253,52,253,66): error CS0246: The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)
81>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PowerCircuit\CS\CircuitOperationData.cs(642,55,642,63): error CS0246: The type or namespace name 'MEPModel' could not be found (are you missing a using directive or an assembly reference?)
81>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PowerCircuit\CS\CircuitOperationData.cs(643,13,643,29): error CS0246: The type or namespace name 'ElectricalSystem' could not be found (are you missing a using directive or an assembly reference?)
81>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PowerCircuit\CS\CircuitOperationData.cs(197,37,197,56): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
81>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PowerCircuit\CS\CircuitOperationData.cs(49,9,49,19): error CS0246: The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)
81>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PowerCircuit\CS\CircuitOperationData.cs(54,9,54,18): error CS0246: The type or namespace name 'Selection' could not be found (are you missing a using directive or an assembly reference?)
81>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PowerCircuit\CS\CircuitOperationData.cs(84,22,84,38): error CS0246: The type or namespace name 'ElectricalSystem' could not be found (are you missing a using directive or an assembly reference?)
81>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PowerCircuit\CS\CircuitOperationData.cs(94,17,94,33): error CS0246: The type or namespace name 'ElectricalSystem' could not be found (are you missing a using directive or an assembly reference?)
84>------ Rebuild All started: Project: SlabShapeEditing, Configuration: Debug Any CPU ------
84>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
84>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
84>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
84>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabShapeEditing\CS\Command.cs(25,7,25,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
84>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabShapeEditing\CS\Command.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
84>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabShapeEditing\CS\Command.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
84>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabShapeEditing\CS\Command.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
84>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabShapeEditing\CS\MathTools.cs(25,7,25,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
84>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabShapeEditing\CS\SlabProfile.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
84>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabShapeEditing\CS\SlabProfile.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
84>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabShapeEditing\CS\SlabProfile.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
84>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabShapeEditing\CS\SlabShapeEditingForm.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
84>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabShapeEditing\CS\SlabShapeEditingForm.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
84>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabShapeEditing\CS\SlabShapeEditingForm.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
84>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabShapeEditing\CS\Command.cs(40,28,40,44): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
84>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabShapeEditing\CS\Command.cs(37,6,37,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
84>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabShapeEditing\CS\Command.cs(38,6,38,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
84>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabShapeEditing\CS\Command.cs(39,6,39,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
84>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabShapeEditing\CS\Command.cs(37,44,37,52): error CS0103: The name 'Autodesk' does not exist in the current context
84>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabShapeEditing\CS\Command.cs(38,45,38,53): error CS0103: The name 'Autodesk' does not exist in the current context
84>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabShapeEditing\CS\Command.cs(39,43,39,51): error CS0103: The name 'Autodesk' does not exist in the current context
84>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabShapeEditing\CS\Command.cs(59,49,59,68): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
84>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabShapeEditing\CS\Command.cs(60,33,60,41): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
84>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabShapeEditing\CS\Command.cs(59,16,59,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
84>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabShapeEditing\CS\Command.cs(81,38,81,57): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
84>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabShapeEditing\CS\Command.cs(81,17,81,22): error CS0246: The type or namespace name 'Floor' could not be found (are you missing a using directive or an assembly reference?)
84>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabShapeEditing\CS\MathTools.cs(114,24,114,32): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
84>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabShapeEditing\CS\SlabProfile.cs(116,14,116,23): error CS0246: The type or namespace name 'EdgeArray' could not be found (are you missing a using directive or an assembly reference?)
84>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabShapeEditing\CS\SlabProfile.cs(294,62,294,65): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
84>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabShapeEditing\CS\SlabProfile.cs(363,14,363,29): error CS0246: The type or namespace name 'SlabShapeVertex' could not be found (are you missing a using directive or an assembly reference?)
84>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabShapeEditing\CS\SlabProfile.cs(384,14,384,29): error CS0246: The type or namespace name 'SlabShapeCrease' could not be found (are you missing a using directive or an assembly reference?)
84>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabShapeEditing\CS\SlabProfile.cs(81,26,81,34): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
84>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabShapeEditing\CS\SlabProfile.cs(81,57,81,76): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
84>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabShapeEditing\CS\SlabProfile.cs(42,7,42,26): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
84>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabShapeEditing\CS\SlabProfile.cs(44,7,44,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
84>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabShapeEditing\CS\SlabProfile.cs(46,7,46,16): error CS0246: The type or namespace name 'EdgeArray' could not be found (are you missing a using directive or an assembly reference?)
84>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabShapeEditing\CS\SlabProfile.cs(68,7,68,22): error CS0246: The type or namespace name 'SlabShapeEditor' could not be found (are you missing a using directive or an assembly reference?)
84>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabShapeEditing\CS\SlabShapeEditingForm.cs(71,37,71,42): error CS0246: The type or namespace name 'Floor' could not be found (are you missing a using directive or an assembly reference?)
84>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabShapeEditing\CS\SlabShapeEditingForm.cs(71,50,71,69): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
84>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabShapeEditing\CS\SlabShapeEditingForm.cs(46,9,46,28): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
84>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabShapeEditing\CS\SlabShapeEditingForm.cs(56,9,56,24): error CS0246: The type or namespace name 'SlabShapeEditor' could not be found (are you missing a using directive or an assembly reference?)
84>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabShapeEditing\CS\SlabShapeEditingForm.cs(57,9,57,24): error CS0246: The type or namespace name 'SlabShapeCrease' could not be found (are you missing a using directive or an assembly reference?)
84>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SlabShapeEditing\CS\SlabShapeEditingForm.cs(58,9,58,24): error CS0246: The type or namespace name 'SlabShapeVertex' could not be found (are you missing a using directive or an assembly reference?)
85>------ Rebuild All started: Project: NewRoof, Configuration: Debug Any CPU ------
83>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
83>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
83>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\Command.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\Command.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\Command.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorFamily.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorFamily.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorFamily.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorFamily.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorFamily.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorFamilyGeometry.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorFamilyGeometry.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorSwingData.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorSwingData.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorSwingData.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\ExternalApplication.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\ExternalApplication.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\ExternalApplication.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\ExternalApplication.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\ExternalApplication.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorSharedParameters.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorSharedParameters.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorSharedParameters.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorSharedParameters.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\Command.cs(44,37,44,53): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\Command.cs(41,5,41,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\Command.cs(42,5,42,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\Command.cs(43,5,43,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\Command.cs(41,43,41,51): error CS0103: The name 'Autodesk' does not exist in the current context
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\Command.cs(42,44,42,52): error CS0103: The name 'Autodesk' does not exist in the current context
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\Command.cs(43,42,43,50): error CS0103: The name 'Autodesk' does not exist in the current context
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\Command.cs(64,47,64,66): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\Command.cs(66,46,66,56): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\Command.cs(64,14,64,22): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\Command.cs(124,39,124,55): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\Command.cs(122,5,122,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\Command.cs(123,5,123,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\Command.cs(122,43,122,51): error CS0103: The name 'Autodesk' does not exist in the current context
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\Command.cs(123,44,123,52): error CS0103: The name 'Autodesk' does not exist in the current context
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\Command.cs(144,47,144,66): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\Command.cs(144,100,144,108): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\Command.cs(144,14,144,22): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\Command.cs(196,41,196,57): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\Command.cs(194,5,194,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\Command.cs(195,5,195,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\Command.cs(194,43,194,51): error CS0103: The name 'Autodesk' does not exist in the current context
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\Command.cs(195,44,195,52): error CS0103: The name 'Autodesk' does not exist in the current context
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\Command.cs(216,47,216,66): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\Command.cs(216,100,216,108): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\Command.cs(216,14,216,22): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorFamily.cs(177,15,177,29): error CS0246: The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorFamily.cs(132,25,132,31): error CS0246: The type or namespace name 'Family' could not be found (are you missing a using directive or an assembly reference?)
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorFamily.cs(132,44,132,57): error CS0246: The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorFamily.cs(43,7,43,13): error CS0246: The type or namespace name 'Family' could not be found (are you missing a using directive or an assembly reference?)
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorFamily.cs(47,7,47,21): error CS0246: The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorFamily.cs(49,7,49,20): error CS0246: The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorFamilyGeometry.cs(111,49,111,57): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorFamilyGeometry.cs(111,22,111,30): error CS0246: The type or namespace name 'ViewPlan' could not be found (are you missing a using directive or an assembly reference?)
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorFamilyGeometry.cs(130,39,130,47): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorFamilyGeometry.cs(181,29,181,43): error CS0246: The type or namespace name 'GeometryObject' could not be found (are you missing a using directive or an assembly reference?)
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorFamilyGeometry.cs(200,28,200,42): error CS0246: The type or namespace name 'GeometryObject' could not be found (are you missing a using directive or an assembly reference?)
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorFamilyGeometry.cs(214,31,214,45): error CS0246: The type or namespace name 'GeometryObject' could not be found (are you missing a using directive or an assembly reference?)
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorFamilyGeometry.cs(224,28,224,42): error CS0246: The type or namespace name 'GeometryObject' could not be found (are you missing a using directive or an assembly reference?)
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorFamilyGeometry.cs(240,32,240,46): error CS0246: The type or namespace name 'GeometryObject' could not be found (are you missing a using directive or an assembly reference?)
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorFamilyGeometry.cs(252,28,252,42): error CS0246: The type or namespace name 'GeometryObject' could not be found (are you missing a using directive or an assembly reference?)
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorFamilyGeometry.cs(285,31,285,45): error CS0246: The type or namespace name 'GeometryObject' could not be found (are you missing a using directive or an assembly reference?)
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorFamilyGeometry.cs(302,29,302,43): error CS0246: The type or namespace name 'GeometryObject' could not be found (are you missing a using directive or an assembly reference?)
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorFamilyGeometry.cs(72,27,72,35): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorFamilyGeometry.cs(42,7,42,14): error CS0246: The type or namespace name 'Options' could not be found (are you missing a using directive or an assembly reference?)
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorFamilyGeometry.cs(44,7,44,21): error CS0246: The type or namespace name 'BoundingBoxXYZ' could not be found (are you missing a using directive or an assembly reference?)
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorFamilyGeometry.cs(46,17,46,20): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\ExternalApplication.cs(46,40,46,60): error CS0246: The type or namespace name 'IExternalApplication' could not be found (are you missing a using directive or an assembly reference?)
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorSwingData.cs(115,64,115,72): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorSwingData.cs(115,23,115,31): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorSwingData.cs(237,48,237,56): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorSwingData.cs(308,79,308,93): error CS0246: The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorSwingData.cs(308,24,308,32): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorSwingData.cs(380,68,380,82): error CS0246: The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorSwingData.cs(404,55,404,69): error CS0246: The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorSwingData.cs(450,46,450,54): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorSwingData.cs(91,30,91,38): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\ExternalApplication.cs(43,6,43,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\ExternalApplication.cs(44,6,44,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\ExternalApplication.cs(45,6,45,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\ExternalApplication.cs(43,44,43,52): error CS0103: The name 'Autodesk' does not exist in the current context
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\ExternalApplication.cs(44,45,44,53): error CS0103: The name 'Autodesk' does not exist in the current context
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\ExternalApplication.cs(45,43,45,51): error CS0103: The name 'Autodesk' does not exist in the current context
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorSwingData.cs(49,9,49,17): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\ExternalApplication.cs(68,51,68,74): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\ExternalApplication.cs(68,16,68,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\ExternalApplication.cs(141,52,141,75): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\ExternalApplication.cs(141,16,141,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\ExternalApplication.cs(154,59,154,82): error CS0246: The type or namespace name 'DocumentSavingEventArgs' could not be found (are you missing a using directive or an assembly reference?)
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\ExternalApplication.cs(198,61,198,86): error CS0246: The type or namespace name 'DocumentSavingAsEventArgs' could not be found (are you missing a using directive or an assembly reference?)
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\ExternalApplication.cs(51,9,51,32): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorSharedParameters.cs(49,46,49,59): error CS0246: The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorSharedParameters.cs(137,71,137,82): error CS0246: The type or namespace name 'Application' could not be found (are you missing a using directive or an assembly reference?)
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorSharedParameters.cs(137,22,137,36): error CS0246: The type or namespace name 'DefinitionFile' could not be found (are you missing a using directive or an assembly reference?)
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorSharedParameters.cs(174,55,174,63): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
83>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DoorSwing\CS\DoorSharedParameters.cs(174,86,174,101): error CS0246: The type or namespace name 'BuiltInCategory' could not be found (are you missing a using directive or an assembly reference?)
86>------ Rebuild All started: Project: CurtainSystem, Configuration: Debug Any CPU ------
85>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
85>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
85>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\Command.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\Command.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\Command.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofForms\CustomTypeConverter.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofForms\ExtrusionRoofWrapper.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofForms\ExtrusionRoofWrapper.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofForms\FootPrintRoofWrapper.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofForms\FootPrintRoofWrapper.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofForms\RoofEditorForm.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofForms\RoofForm.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofForms\RoofForm.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofForms\RoofItem.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofForms\GraphicsControl.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\ExtrusionRoofManager.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\ExtrusionRoofManager.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\ExtrusionRoofManager.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\FootPrintRoofManager.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\FootPrintRoofManager.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\FootPrintRoofManager.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\RoofsManager.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\RoofsManager.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\RoofsManager.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\RoofsManager.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\Command.cs(42,28,42,44): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\Command.cs(39,6,39,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\Command.cs(40,6,40,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\Command.cs(41,6,41,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\Command.cs(39,44,39,52): error CS0103: The name 'Autodesk' does not exist in the current context
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\Command.cs(40,45,40,53): error CS0103: The name 'Autodesk' does not exist in the current context
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\Command.cs(41,43,41,51): error CS0103: The name 'Autodesk' does not exist in the current context
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\Command.cs(50,23,50,31): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\Command.cs(74,49,74,57): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\Command.cs(76,48,76,58): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\Command.cs(74,16,74,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\Command.cs(45,24,45,32): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofForms\CustomTypeConverter.cs(47,66,47,71): error CS0246: The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofForms\CustomTypeConverter.cs(61,23,61,28): error CS0246: The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\ExtrusionRoofManager.cs(67,50,67,60): error CS0246: The type or namespace name 'CurveArray' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\ExtrusionRoofManager.cs(67,70,67,84): error CS0246: The type or namespace name 'ReferencePlane' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\ExtrusionRoofManager.cs(67,95,67,100): error CS0246: The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\ExtrusionRoofManager.cs(67,108,67,116): error CS0246: The type or namespace name 'RoofType' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\ExtrusionRoofManager.cs(67,16,67,29): error CS0246: The type or namespace name 'ExtrusionRoof' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\ExtrusionRoofManager.cs(50,37,50,56): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\ExtrusionRoofManager.cs(40,9,40,28): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\ExtrusionRoofManager.cs(42,9,42,17): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\ExtrusionRoofManager.cs(44,9,44,17): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofForms\CustomTypeConverter.cs(41,43,41,48): error CS0246: The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\FootPrintRoofManager.cs(63,50,63,60): error CS0246: The type or namespace name 'CurveArray' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\FootPrintRoofManager.cs(63,72,63,77): error CS0246: The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\FootPrintRoofManager.cs(63,85,63,93): error CS0246: The type or namespace name 'RoofType' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\FootPrintRoofManager.cs(63,16,63,29): error CS0246: The type or namespace name 'FootPrintRoof' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\FootPrintRoofManager.cs(49,37,49,56): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\FootPrintRoofManager.cs(39,9,39,28): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\FootPrintRoofManager.cs(41,9,41,17): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\FootPrintRoofManager.cs(43,9,43,17): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\RoofsManager.cs(167,35,167,40): error CS0246: The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\RoofsManager.cs(178,35,178,43): error CS0246: The type or namespace name 'RoofType' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\RoofsManager.cs(189,35,189,49): error CS0246: The type or namespace name 'ReferencePlane' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\RoofsManager.cs(200,16,200,26): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\RoofsManager.cs(211,16,211,26): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\RoofsManager.cs(222,16,222,26): error CS0246: The type or namespace name 'CurveArray' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\RoofsManager.cs(233,16,233,26): error CS0246: The type or namespace name 'CurveArray' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\RoofsManager.cs(245,16,245,26): error CS0246: The type or namespace name 'CurveArray' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\RoofsManager.cs(261,16,261,26): error CS0246: The type or namespace name 'CurveArray' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\RoofsManager.cs(324,50,324,55): error CS0246: The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\RoofsManager.cs(324,63,324,71): error CS0246: The type or namespace name 'RoofType' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\RoofsManager.cs(324,16,324,29): error CS0246: The type or namespace name 'FootPrintRoof' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofForms\ExtrusionRoofWrapper.cs(120,16,120,21): error CS0246: The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\RoofsManager.cs(339,16,339,26): error CS0246: The type or namespace name 'CurveArray' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\RoofsManager.cs(389,50,389,64): error CS0246: The type or namespace name 'ReferencePlane' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\RoofsManager.cs(390,13,390,18): error CS0246: The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\RoofsManager.cs(390,26,390,34): error CS0246: The type or namespace name 'RoofType' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\RoofsManager.cs(389,16,389,29): error CS0246: The type or namespace name 'ExtrusionRoof' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofForms\ExtrusionRoofWrapper.cs(48,37,48,50): error CS0246: The type or namespace name 'ExtrusionRoof' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\RoofsManager.cs(405,16,405,33): error CS0246: The type or namespace name 'TransactionStatus' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\RoofsManager.cs(418,16,418,33): error CS0246: The type or namespace name 'TransactionStatus' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofForms\ExtrusionRoofWrapper.cs(42,17,42,30): error CS0246: The type or namespace name 'ExtrusionRoof' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\RoofsManager.cs(426,16,426,33): error CS0246: The type or namespace name 'TransactionStatus' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\RoofsManager.cs(90,29,90,48): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\RoofsManager.cs(54,9,54,28): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\RoofsManager.cs(56,14,56,19): error CS0246: The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\RoofsManager.cs(58,14,58,22): error CS0246: The type or namespace name 'RoofType' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\RoofsManager.cs(65,9,65,18): error CS0246: The type or namespace name 'Selection' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\RoofsManager.cs(68,9,68,19): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\RoofsManager.cs(69,9,69,19): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\RoofsManager.cs(72,9,72,17): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\RoofsManager.cs(75,9,75,17): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\RoofsManager.cs(78,14,78,28): error CS0246: The type or namespace name 'ReferencePlane' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofsManager\RoofsManager.cs(81,9,81,20): error CS0246: The type or namespace name 'Transaction' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofForms\FootPrintRoofWrapper.cs(46,40,46,48): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofForms\FootPrintRoofWrapper.cs(46,72,46,86): error CS0246: The type or namespace name 'BoundingBoxXYZ' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofForms\FootPrintRoofWrapper.cs(94,75,94,80): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofForms\FootPrintRoofWrapper.cs(108,16,108,26): error CS0246: The type or namespace name 'ModelCurve' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofForms\FootPrintRoofWrapper.cs(70,34,70,47): error CS0246: The type or namespace name 'FootPrintRoof' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofForms\FootPrintRoofWrapper.cs(70,54,70,64): error CS0246: The type or namespace name 'ModelCurve' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofForms\FootPrintRoofWrapper.cs(60,17,60,30): error CS0246: The type or namespace name 'FootPrintRoof' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofForms\FootPrintRoofWrapper.cs(62,17,62,27): error CS0246: The type or namespace name 'ModelCurve' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofForms\FootPrintRoofWrapper.cs(64,17,64,31): error CS0246: The type or namespace name 'BoundingBoxXYZ' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofForms\FootPrintRoofWrapper.cs(268,16,268,30): error CS0246: The type or namespace name 'BoundingBoxXYZ' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofForms\FootPrintRoofWrapper.cs(298,16,298,21): error CS0246: The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofForms\FootPrintRoofWrapper.cs(320,16,320,30): error CS0246: The type or namespace name 'EaveCutterType' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofForms\FootPrintRoofWrapper.cs(243,37,243,50): error CS0246: The type or namespace name 'FootPrintRoof' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofForms\FootPrintRoofWrapper.cs(228,17,228,30): error CS0246: The type or namespace name 'FootPrintRoof' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofForms\FootPrintRoofWrapper.cs(235,17,235,31): error CS0246: The type or namespace name 'BoundingBoxXYZ' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofForms\RoofEditorForm.cs(64,74,64,82): error CS0246: The type or namespace name 'RoofBase' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofForms\RoofEditorForm.cs(41,17,41,25): error CS0246: The type or namespace name 'RoofBase' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofForms\RoofItem.cs(96,16,96,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofForms\RoofItem.cs(44,25,44,33): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
85>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewRoof\CS\RoofForms\RoofItem.cs(38,9,38,17): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>------ Rebuild All started: Project: ImportExport, Configuration: Debug Any CPU ------
86>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
86>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
86>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
86>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\Command.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
86>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\Command.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
86>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\Command.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
86>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\CurtainSystem\MassChecker.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
86>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\CurtainSystem\MassChecker.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
86>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\CurtainSystem\MassChecker.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
86>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\CurtainSystem\SystemData.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
86>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\CurtainSystem\SystemData.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
86>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\Data\MyDocument.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
86>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\Data\MyDocument.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
86>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\Data\MyDocument.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
86>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\UI\CurtainForm.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
86>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\UI\CurtainForm.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
86>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\Utility\MathTools.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
86>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\Command.cs(40,20,40,36): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
86>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\Command.cs(37,5,37,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
86>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\Command.cs(38,5,38,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
86>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\Command.cs(39,5,39,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
86>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\Command.cs(37,43,37,51): error CS0103: The name 'Autodesk' does not exist in the current context
86>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\Command.cs(38,44,38,52): error CS0103: The name 'Autodesk' does not exist in the current context
86>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\Command.cs(39,42,39,50): error CS0103: The name 'Autodesk' does not exist in the current context
86>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\Data\MyDocument.cs(46,16,46,35): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
86>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\Command.cs(59,47,59,66): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
86>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\Command.cs(59,100,59,108): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
86>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\Command.cs(59,14,59,22): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
86>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\Data\MyDocument.cs(64,16,64,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
86>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\Data\MyDocument.cs(73,16,73,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
86>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\Data\MyDocument.cs(100,16,100,25): error CS0246: The type or namespace name 'FaceArray' could not be found (are you missing a using directive or an assembly reference?)
86>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\Data\MyDocument.cs(117,16,117,33): error CS0246: The type or namespace name 'CurtainSystemType' could not be found (are you missing a using directive or an assembly reference?)
86>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\CurtainSystem\MassChecker.cs(89,41,89,55): error CS0246: The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)
86>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\Data\MyDocument.cs(199,27,199,46): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
86>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\Data\MyDocument.cs(42,9,42,28): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
86>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\Data\MyDocument.cs(59,9,59,17): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
86>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\CurtainSystem\MassChecker.cs(120,36,120,45): error CS0246: The type or namespace name 'FaceArray' could not be found (are you missing a using directive or an assembly reference?)
86>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\Data\MyDocument.cs(72,9,72,17): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
86>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\CurtainSystem\MassChecker.cs(222,36,222,40): error CS0246: The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)
86>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\CurtainSystem\MassChecker.cs(222,48,222,52): error CS0246: The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)
86>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\Data\MyDocument.cs(96,9,96,18): error CS0246: The type or namespace name 'FaceArray' could not be found (are you missing a using directive or an assembly reference?)
86>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\CurtainSystem\MassChecker.cs(285,51,285,55): error CS0246: The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)
86>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\CurtainSystem\MassChecker.cs(285,63,285,67): error CS0246: The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)
86>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\Data\MyDocument.cs(113,9,113,26): error CS0246: The type or namespace name 'CurtainSystemType' could not be found (are you missing a using directive or an assembly reference?)
86>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\CurtainSystem\MassChecker.cs(305,42,305,56): error CS0246: The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)
86>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\CurtainSystem\MassChecker.cs(305,15,305,24): error CS0246: The type or namespace name 'FaceArray' could not be found (are you missing a using directive or an assembly reference?)
86>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\CurtainSystem\MassChecker.cs(352,15,352,29): error CS0246: The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)
86>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\CurtainSystem\SystemData.cs(240,16,240,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
86>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\CurtainSystem\SystemData.cs(236,9,236,17): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
86>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CurtainSystem\CS\Utility\MathTools.cs(116,22,116,30): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
88>------ Rebuild All started: Project: NewHostedSweep, Configuration: Debug Any CPU ------
88>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
88>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
88>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Command.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Command.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Command.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Data\CreationData.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Data\CreationData.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Forms\EdgeFormUITypeEditor.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Geom\ElementGeometry.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\FasciaCreator.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\FasciaCreator.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\FasciaCreator.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\GutterCreator.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\GutterCreator.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\GutterCreator.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\HostedSweepCreator.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\HostedSweepCreator.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\HostedSweepCreator.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Forms\HostedSweepModifyForm.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Forms\HostedSweepModifyForm.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Forms\EdgeFetchForm.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Forms\EdgeFetchForm.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Data\ModificationData.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Data\ModificationData.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Data\ModificationData.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Data\ModificationData.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\SlabEdgeCreator.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\SlabEdgeCreator.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Geom\TrackBall.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Command.cs(40,28,40,44): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Command.cs(37,6,37,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Command.cs(38,6,38,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Command.cs(39,6,39,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Command.cs(37,44,37,52): error CS0103: The name 'Autodesk' does not exist in the current context
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Command.cs(38,45,38,53): error CS0103: The name 'Autodesk' does not exist in the current context
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Command.cs(39,43,39,51): error CS0103: The name 'Autodesk' does not exist in the current context
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Command.cs(60,49,60,68): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Command.cs(61,33,61,41): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Command.cs(60,16,60,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Data\CreationData.cs(163,16,163,27): error CS0246: The type or namespace name 'ElementType' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Data\CreationData.cs(172,21,172,25): error CS0246: The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Data\CreationData.cs(74,17,74,28): error CS0246: The type or namespace name 'ElementType' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Data\CreationData.cs(79,22,79,26): error CS0246: The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Data\CreationData.cs(84,17,84,28): error CS0246: The type or namespace name 'ElementType' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Data\CreationData.cs(89,22,89,26): error CS0246: The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\HostedSweepCreator.cs(56,34,56,42): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\HostedSweepCreator.cs(56,66,56,70): error CS0246: The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\GutterCreator.cs(116,36,116,44): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\GutterCreator.cs(116,68,116,72): error CS0246: The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Data\CreationData.cs(42,47,42,51): error CS0246: The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\GutterCreator.cs(57,43,57,51): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\HostedSweepCreator.cs(187,56,187,67): error CS0246: The type or namespace name 'ElementType' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\HostedSweepCreator.cs(187,76,187,90): error CS0246: The type or namespace name 'ReferenceArray' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\HostedSweepCreator.cs(187,26,187,37): error CS0246: The type or namespace name 'HostedSweep' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Data\CreationData.cs(49,56,49,67): error CS0246: The type or namespace name 'ElementType' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\GutterCreator.cs(159,58,159,69): error CS0246: The type or namespace name 'ElementType' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\GutterCreator.cs(159,78,159,92): error CS0246: The type or namespace name 'ReferenceArray' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\GutterCreator.cs(159,28,159,39): error CS0246: The type or namespace name 'HostedSweep' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\GutterCreator.cs(43,30,43,38): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\GutterCreator.cs(51,28,51,36): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\GutterCreator.cs(51,60,51,64): error CS0246: The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\HostedSweepCreator.cs(72,25,72,33): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\HostedSweepCreator.cs(125,14,125,22): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\HostedSweepCreator.cs(136,14,136,24): error CS0246: The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\HostedSweepCreator.cs(194,45,194,53): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\HostedSweepCreator.cs(170,36,170,44): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\CreationMgr.cs(106,28,106,36): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\CreationMgr.cs(40,17,40,25): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\HostedSweepCreator.cs(154,17,154,25): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\HostedSweepCreator.cs(159,17,159,27): error CS0246: The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\HostedSweepCreator.cs(164,28,164,36): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Geom\ElementGeometry.cs(87,16,87,19): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Geom\ElementGeometry.cs(113,16,113,25): error CS0246: The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Geom\ElementGeometry.cs(126,16,126,21): error CS0246: The type or namespace name 'Solid' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Geom\ElementGeometry.cs(135,27,135,31): error CS0246: The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Geom\ElementGeometry.cs(146,32,146,37): error CS0246: The type or namespace name 'Solid' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Geom\ElementGeometry.cs(146,45,146,59): error CS0246: The type or namespace name 'BoundingBoxXYZ' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Geom\ElementGeometry.cs(43,17,43,22): error CS0246: The type or namespace name 'Solid' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Geom\ElementGeometry.cs(48,17,48,20): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Geom\ElementGeometry.cs(53,17,53,20): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Geom\ElementGeometry.cs(59,17,59,20): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Geom\ElementGeometry.cs(69,17,69,26): error CS0246: The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Geom\ElementGeometry.cs(81,28,81,32): error CS0246: The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Geom\ElementGeometry.cs(306,28,306,37): error CS0246: The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Geom\ElementGeometry.cs(306,48,306,51): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Geom\ElementGeometry.cs(283,28,283,32): error CS0246: The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Geom\ElementGeometry.cs(234,23,234,26): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Forms\EdgeFetchForm.cs(360,42,360,46): error CS0246: The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\FasciaCreator.cs(116,36,116,44): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\FasciaCreator.cs(116,68,116,72): error CS0246: The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\FasciaCreator.cs(57,43,57,51): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\FasciaCreator.cs(158,58,158,69): error CS0246: The type or namespace name 'ElementType' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\FasciaCreator.cs(158,78,158,92): error CS0246: The type or namespace name 'ReferenceArray' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\FasciaCreator.cs(158,28,158,39): error CS0246: The type or namespace name 'HostedSweep' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\FasciaCreator.cs(43,30,43,38): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Forms\EdgeFetchForm.cs(66,17,66,25): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\FasciaCreator.cs(51,28,51,36): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\FasciaCreator.cs(51,60,51,64): error CS0246: The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Geom\TrackBall.cs(72,16,72,25): error CS0246: The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Geom\TrackBall.cs(94,17,94,20): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Data\ModificationData.cs(103,51,103,62): error CS0246: The type or namespace name 'ElementType' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Data\ModificationData.cs(122,49,122,53): error CS0246: The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Geom\TrackBall.cs(57,17,57,20): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Data\ModificationData.cs(140,47,140,51): error CS0246: The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Geom\TrackBall.cs(62,17,62,26): error CS0246: The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Data\ModificationData.cs(383,19,383,28): error CS0246: The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Data\ModificationData.cs(389,16,389,33): error CS0246: The type or namespace name 'TransactionStatus' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Data\ModificationData.cs(394,16,394,33): error CS0246: The type or namespace name 'TransactionStatus' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Data\ModificationData.cs(399,16,399,33): error CS0246: The type or namespace name 'TransactionStatus' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Data\ModificationData.cs(71,33,71,44): error CS0246: The type or namespace name 'HostedSweep' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Data\ModificationData.cs(43,17,43,28): error CS0246: The type or namespace name 'HostedSweep' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Data\ModificationData.cs(53,17,53,25): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Data\ModificationData.cs(58,17,58,27): error CS0246: The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Data\ModificationData.cs(63,9,63,20): error CS0246: The type or namespace name 'Transaction' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\SlabEdgeCreator.cs(130,36,130,44): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\SlabEdgeCreator.cs(130,68,130,72): error CS0246: The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\SlabEdgeCreator.cs(56,45,56,53): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\SlabEdgeCreator.cs(118,58,118,69): error CS0246: The type or namespace name 'ElementType' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\SlabEdgeCreator.cs(118,78,118,92): error CS0246: The type or namespace name 'ReferenceArray' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\SlabEdgeCreator.cs(118,28,118,39): error CS0246: The type or namespace name 'HostedSweep' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\SlabEdgeCreator.cs(42,32,42,40): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\SlabEdgeCreator.cs(50,28,50,36): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
88>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\NewHostedSweep\CS\Creators\SlabEdgeCreator.cs(50,60,50,64): error CS0246: The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)
89>------ Rebuild All started: Project: RoofsRooms, Configuration: Debug Any CPU ------
87>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
87>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
87>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Command.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Command.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportIMGData.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportIMGData.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportIMGData.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportIMGOptionsForm.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportIMGOptionsForm.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportSATData.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportSATData.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportSATData.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportDXFData.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportDXFData.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportDXFData.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportDGNData.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportDGNData.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportDGNData.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportDGNOptionsForm.cs(34,7,34,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportFBXData.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportFBXData.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportFBXData.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportGBXMLData.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportGBXMLData.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportGBXMLData.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportDWFData.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportDWFData.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportDWFData.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportData.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportData.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportData.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportDataWithViews.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportDataWithViews.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportDataWithViews.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportDWGData.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportDWGData.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportDWGData.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportBaseOptionsData.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Import\ImportGBXMLData.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Import\ImportGBXMLData.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Import\ImportGBXMLData.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Import\ImportImageData.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Import\ImportImageData.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Import\ImportImageData.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Import\ImportData.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Import\ImportData.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Import\ImportData.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Import\ImportDWGData.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Import\ImportDWGData.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Import\ImportDWGData.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Import\ImportDWGForm.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Import\ImportDWGForm.cs(34,7,34,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Import\ImportDWGForm.cs(35,7,35,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportWithViewsForm.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Import\ImportInventorData.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Import\ImportInventorData.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Import\ImportInventorData.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\MainData.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\MainData.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\SelectViewsData.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\SelectViewsData.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\SelectViewsData.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Unit.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Command.cs(40,28,40,44): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Command.cs(37,6,37,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Command.cs(38,6,38,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Command.cs(39,6,39,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Command.cs(37,44,37,52): error CS0103: The name 'Autodesk' does not exist in the current context
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Command.cs(38,45,38,53): error CS0103: The name 'Autodesk' does not exist in the current context
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Command.cs(39,43,39,51): error CS0103: The name 'Autodesk' does not exist in the current context
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Command.cs(58,49,58,68): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Command.cs(59,29,59,37): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Command.cs(58,16,58,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportIMGData.cs(53,30,53,49): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Import\ImportGBXMLData.cs(43,32,43,51): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Import\ImportImageData.cs(44,30,44,49): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Import\ImportData.cs(79,16,79,35): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Import\ImportData.cs(161,27,161,46): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Import\ImportData.cs(44,19,44,38): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Import\ImportData.cs(48,19,48,27): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportIMGOptionsForm.cs(46,17,46,35): error CS0246: The type or namespace name 'ImageExportOptions' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Import\ImportDWGData.cs(152,16,152,23): error CS0246: The type or namespace name 'ViewSet' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Import\ImportDWGData.cs(168,16,168,20): error CS0246: The type or namespace name 'View' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Import\ImportDWGData.cs(196,35,196,43): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Import\ImportDWGData.cs(208,16,208,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Import\ImportDWGData.cs(268,35,268,43): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Import\ImportDWGData.cs(280,16,280,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Import\ImportDWGData.cs(308,35,308,43): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Import\ImportDWGData.cs(320,16,320,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Import\ImportDWGData.cs(395,30,395,49): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Import\ImportDWGData.cs(48,17,48,24): error CS0246: The type or namespace name 'ViewSet' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Import\ImportDWGData.cs(53,17,53,21): error CS0246: The type or namespace name 'View' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportSATData.cs(73,33,73,41): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Import\ImportDWGData.cs(63,22,63,30): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportSATData.cs(84,14,84,22): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Import\ImportDWGData.cs(68,17,68,25): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Import\ImportDWGData.cs(88,22,88,30): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportSATData.cs(103,28,103,47): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Import\ImportDWGData.cs(93,17,93,25): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Import\ImportDWGData.cs(103,22,103,30): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Import\ImportDWGData.cs(108,17,108,25): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportSATData.cs(49,20,49,28): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportSATData.cs(54,15,54,23): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportDXFData.cs(92,35,92,43): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportDXFData.cs(103,16,103,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportDXFData.cs(122,30,122,49): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportDXFData.cs(54,22,54,30): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportDXFData.cs(59,17,59,25): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportDGNData.cs(195,30,195,49): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Import\ImportInventorData.cs(43,35,43,54): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportFBXData.cs(43,30,43,49): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\MainData.cs(114,16,114,35): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportGBXMLData.cs(43,32,43,51): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\MainData.cs(141,25,141,44): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\MainData.cs(106,17,106,36): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\SelectViewsData.cs(70,16,70,23): error CS0246: The type or namespace name 'ViewSet' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportDWFData.cs(116,16,116,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\SelectViewsData.cs(85,16,85,23): error CS0246: The type or namespace name 'ViewSet' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\SelectViewsData.cs(100,16,100,23): error CS0246: The type or namespace name 'ViewSet' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportDWFData.cs(131,16,131,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportDWFData.cs(146,21,146,29): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportDWFData.cs(165,30,165,49): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\SelectViewsData.cs(132,32,132,51): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\SelectViewsData.cs(43,17,43,36): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportDWFData.cs(56,14,56,22): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\SelectViewsData.cs(48,17,48,24): error CS0246: The type or namespace name 'ViewSet' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportDWFData.cs(60,9,60,17): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\SelectViewsData.cs(53,17,53,24): error CS0246: The type or namespace name 'ViewSet' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportDWFData.cs(64,9,64,17): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\SelectViewsData.cs(58,17,58,24): error CS0246: The type or namespace name 'ViewSet' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportData.cs(98,16,98,35): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportData.cs(109,16,109,24): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportData.cs(242,27,242,46): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportData.cs(45,19,45,38): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportData.cs(50,19,50,27): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportDataWithViews.cs(74,16,74,23): error CS0246: The type or namespace name 'ViewSet' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportDataWithViews.cs(108,36,108,55): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportDataWithViews.cs(47,17,47,24): error CS0246: The type or namespace name 'ViewSet' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportDWGData.cs(92,35,92,43): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportDWGData.cs(103,16,103,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportDWGData.cs(122,30,122,49): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportDWGData.cs(54,22,54,30): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportDWGData.cs(59,17,59,25): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportBaseOptionsData.cs(152,35,152,43): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportBaseOptionsData.cs(163,16,163,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportBaseOptionsData.cs(226,35,226,43): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportBaseOptionsData.cs(237,16,237,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Unit.cs(45,44,45,55): error CS0246: The type or namespace name 'ForgeTypeId' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Unit.cs(56,56,56,67): error CS0246: The type or namespace name 'ForgeTypeId' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Unit.cs(66,48,66,59): error CS0246: The type or namespace name 'ForgeTypeId' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportBaseOptionsData.cs(300,35,300,43): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportBaseOptionsData.cs(311,16,311,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportBaseOptionsData.cs(337,35,337,43): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportBaseOptionsData.cs(348,16,348,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportBaseOptionsData.cs(46,14,46,22): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportBaseOptionsData.cs(71,9,71,17): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportBaseOptionsData.cs(76,14,76,22): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportBaseOptionsData.cs(81,9,81,17): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportBaseOptionsData.cs(106,14,106,22): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportBaseOptionsData.cs(111,9,111,17): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportBaseOptionsData.cs(121,14,121,22): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
87>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ImportExport\CS\Export\ExportBaseOptionsData.cs(126,9,126,17): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
90>------ Rebuild All started: Project: EventsMonitor, Configuration: Debug Any CPU ------
89>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
89>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
89>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
89>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoofsRooms\CS\Command.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
89>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoofsRooms\CS\Command.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
89>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoofsRooms\CS\Command.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
89>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoofsRooms\CS\Command.cs(34,7,34,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
89>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoofsRooms\CS\Command.cs(45,28,45,44): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
89>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoofsRooms\CS\Command.cs(42,6,42,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
89>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoofsRooms\CS\Command.cs(43,6,43,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
89>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoofsRooms\CS\Command.cs(44,6,44,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
89>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoofsRooms\CS\Command.cs(42,44,42,52): error CS0103: The name 'Autodesk' does not exist in the current context
89>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoofsRooms\CS\Command.cs(43,45,43,53): error CS0103: The name 'Autodesk' does not exist in the current context
89>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoofsRooms\CS\Command.cs(44,43,44,51): error CS0103: The name 'Autodesk' does not exist in the current context
89>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoofsRooms\CS\Command.cs(71,49,71,68): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
89>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoofsRooms\CS\Command.cs(72,33,72,41): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
89>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoofsRooms\CS\Command.cs(71,16,71,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
89>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoofsRooms\CS\Command.cs(130,64,130,72): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
89>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoofsRooms\CS\Command.cs(252,22,252,29): error CS0246: The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)
89>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoofsRooms\CS\Command.cs(49,9,49,17): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
89>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoofsRooms\CS\Command.cs(51,9,51,17): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
91>------ Rebuild All started: Project: CancelSave, Configuration: Debug Any CPU ------
91>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
91>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
91>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
91>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\CancelSave\CS\CancelSave.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
91>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\CancelSave\CS\CancelSave.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
91>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\CancelSave\CS\CancelSave.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
91>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\CancelSave\CS\CancelSave.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
91>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\CancelSave\CS\CancelSave.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
91>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\CancelSave\CS\CancelSave.cs(34,7,34,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
91>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\CancelSave\CS\LogManager.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
91>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\CancelSave\CS\CancelSave.cs(45,31,45,51): error CS0246: The type or namespace name 'IExternalApplication' could not be found (are you missing a using directive or an assembly reference?)
91>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\CancelSave\CS\CancelSave.cs(42,6,42,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
91>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\CancelSave\CS\CancelSave.cs(43,6,43,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
91>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\CancelSave\CS\CancelSave.cs(44,6,44,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
91>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\CancelSave\CS\CancelSave.cs(42,44,42,52): error CS0103: The name 'Autodesk' does not exist in the current context
91>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\CancelSave\CS\CancelSave.cs(43,45,43,53): error CS0103: The name 'Autodesk' does not exist in the current context
91>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\CancelSave\CS\CancelSave.cs(44,43,44,51): error CS0103: The name 'Autodesk' does not exist in the current context
91>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\CancelSave\CS\CancelSave.cs(66,51,66,74): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
91>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\CancelSave\CS\CancelSave.cs(66,16,66,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
91>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\CancelSave\CS\CancelSave.cs(84,52,84,75): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
91>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\CancelSave\CS\CancelSave.cs(84,16,84,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
91>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\CancelSave\CS\CancelSave.cs(108,65,108,89): error CS0246: The type or namespace name 'RevitAPIPostDocEventArgs' could not be found (are you missing a using directive or an assembly reference?)
91>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\CancelSave\CS\CancelSave.cs(140,62,140,85): error CS0246: The type or namespace name 'RevitAPIPreDocEventArgs' could not be found (are you missing a using directive or an assembly reference?)
91>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\CancelSave\CS\CancelSave.cs(176,64,176,88): error CS0246: The type or namespace name 'DocumentClosingEventArgs' could not be found (are you missing a using directive or an assembly reference?)
91>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\CancelSave\CS\CancelSave.cs(181,66,181,89): error CS0246: The type or namespace name 'DocumentClosedEventArgs' could not be found (are you missing a using directive or an assembly reference?)
91>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\CancelSave\CS\CancelSave.cs(195,43,195,66): error CS0246: The type or namespace name 'RevitAPIPreDocEventArgs' could not be found (are you missing a using directive or an assembly reference?)
91>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\CancelSave\CS\CancelSave.cs(240,60,240,68): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
91>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\CancelSave\CS\CancelSave.cs(252,55,252,63): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
91>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\CancelSave\CS\LogManager.cs(96,53,96,61): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
92>------ Rebuild All started: Project: PrintLog, Configuration: Debug Any CPU ------
90>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
90>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
90>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
90>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\EventsMonitor\CS\Command.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
90>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\EventsMonitor\CS\Command.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
90>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\EventsMonitor\CS\Command.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
90>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\EventsMonitor\CS\EventManager.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
90>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\EventsMonitor\CS\EventManager.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
90>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\EventsMonitor\CS\EventManager.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
90>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\EventsMonitor\CS\EventManager.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
90>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\EventsMonitor\CS\EventManager.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
90>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\EventsMonitor\CS\EventsSettingForm.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
90>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\EventsMonitor\CS\ExternalApplication.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
90>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\EventsMonitor\CS\ExternalApplication.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
90>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\EventsMonitor\CS\ExternalApplication.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
90>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\EventsMonitor\CS\JournalProcessor.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
90>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\EventsMonitor\CS\JournalProcessor.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
90>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\EventsMonitor\CS\LogManager.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
90>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\EventsMonitor\CS\LogManager.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
90>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\EventsMonitor\CS\Command.cs(45,28,45,44): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
90>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\EventsMonitor\CS\Command.cs(42,6,42,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
90>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\EventsMonitor\CS\Command.cs(43,6,43,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
90>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\EventsMonitor\CS\Command.cs(44,6,44,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
90>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\EventsMonitor\CS\Command.cs(42,44,42,52): error CS0103: The name 'Autodesk' does not exist in the current context
90>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\EventsMonitor\CS\Command.cs(43,45,43,53): error CS0103: The name 'Autodesk' does not exist in the current context
90>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\EventsMonitor\CS\Command.cs(44,43,44,51): error CS0103: The name 'Autodesk' does not exist in the current context
90>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\EventsMonitor\CS\Command.cs(64,49,64,68): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
90>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\EventsMonitor\CS\Command.cs(66,40,66,50): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
90>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\EventsMonitor\CS\Command.cs(64,16,64,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
90>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\EventsMonitor\CS\EventManager.cs(71,29,71,52): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
90>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\EventsMonitor\CS\EventManager.cs(50,17,50,40): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
90>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\EventsMonitor\CS\ExternalApplication.cs(45,40,45,60): error CS0246: The type or namespace name 'IExternalApplication' could not be found (are you missing a using directive or an assembly reference?)
90>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\EventsMonitor\CS\ExternalApplication.cs(42,6,42,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
90>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\EventsMonitor\CS\ExternalApplication.cs(43,6,43,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
90>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\EventsMonitor\CS\ExternalApplication.cs(44,6,44,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
90>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\EventsMonitor\CS\ExternalApplication.cs(42,44,42,52): error CS0103: The name 'Autodesk' does not exist in the current context
90>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\EventsMonitor\CS\ExternalApplication.cs(43,45,43,53): error CS0103: The name 'Autodesk' does not exist in the current context
90>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\EventsMonitor\CS\ExternalApplication.cs(44,43,44,51): error CS0103: The name 'Autodesk' does not exist in the current context
90>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\EventsMonitor\CS\ExternalApplication.cs(216,51,216,74): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
90>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\EventsMonitor\CS\ExternalApplication.cs(216,16,216,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
90>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\EventsMonitor\CS\ExternalApplication.cs(287,52,287,75): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
90>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\EventsMonitor\CS\ExternalApplication.cs(287,16,287,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
90>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\EventsMonitor\CS\ExternalApplication.cs(319,44,319,67): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
90>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\EventsMonitor\CS\ExternalApplication.cs(55,24,55,47): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
93>------ Rebuild All started: Project: TraverseSystem, Configuration: Debug Any CPU ------
92>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
92>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
92>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
92>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\PrintLog\CS\Command.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
92>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\PrintLog\CS\Command.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
92>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\PrintLog\CS\Command.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
92>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\PrintLog\CS\Application.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
92>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\PrintLog\CS\Application.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
92>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\PrintLog\CS\Application.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
92>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\PrintLog\CS\EventsWatches.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
92>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\PrintLog\CS\EventsReactor.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
92>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\PrintLog\CS\EventsReactor.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
92>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\PrintLog\CS\EventsReactor.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
92>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\PrintLog\CS\Command.cs(41,27,41,43): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
92>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\PrintLog\CS\Command.cs(38,6,38,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
92>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\PrintLog\CS\Command.cs(39,6,39,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
92>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\PrintLog\CS\Command.cs(40,6,40,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
92>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\PrintLog\CS\Command.cs(38,44,38,52): error CS0103: The name 'Autodesk' does not exist in the current context
92>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\PrintLog\CS\Command.cs(39,45,39,53): error CS0103: The name 'Autodesk' does not exist in the current context
92>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\PrintLog\CS\Command.cs(40,43,40,51): error CS0103: The name 'Autodesk' does not exist in the current context
92>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\PrintLog\CS\Command.cs(60,49,60,68): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
92>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\PrintLog\CS\Command.cs(61,33,61,41): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
92>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\PrintLog\CS\Command.cs(60,16,60,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
92>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\PrintLog\CS\Application.cs(41,32,41,52): error CS0246: The type or namespace name 'IExternalApplication' could not be found (are you missing a using directive or an assembly reference?)
92>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\PrintLog\CS\Application.cs(38,6,38,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
92>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\PrintLog\CS\Application.cs(39,6,39,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
92>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\PrintLog\CS\Application.cs(40,6,40,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
92>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\PrintLog\CS\Application.cs(38,44,38,52): error CS0103: The name 'Autodesk' does not exist in the current context
92>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\PrintLog\CS\Application.cs(39,45,39,53): error CS0103: The name 'Autodesk' does not exist in the current context
92>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\PrintLog\CS\Application.cs(40,43,40,51): error CS0103: The name 'Autodesk' does not exist in the current context
92>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\PrintLog\CS\Application.cs(57,51,57,74): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
92>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\PrintLog\CS\Application.cs(57,16,57,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
92>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\PrintLog\CS\Application.cs(73,52,73,75): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
92>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\PrintLog\CS\Application.cs(73,16,73,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
92>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\PrintLog\CS\EventsReactor.cs(152,56,152,64): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
92>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\PrintLog\CS\EventsReactor.cs(174,52,174,60): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
92>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\PrintLog\CS\EventsReactor.cs(193,51,193,59): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
92>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\PrintLog\CS\EventsReactor.cs(211,55,211,63): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
92>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\PrintLog\CS\EventsReactor.cs(265,36,265,44): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
92>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\PrintLog\CS\EventsReactor.cs(296,32,296,40): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
92>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\PrintLog\CS\EventsReactor.cs(362,48,362,65): error CS0246: The type or namespace name 'RevitAPIEventArgs' could not be found (are you missing a using directive or an assembly reference?)
92>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\PrintLog\CS\EventsReactor.cs(438,43,438,51): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
92>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\PrintLog\CS\EventsReactor.cs(438,69,438,78): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
92>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\PrintLog\CS\EventsReactor.cs(457,42,457,46): error CS0246: The type or namespace name 'View' could not be found (are you missing a using directive or an assembly reference?)
94>------ Rebuild All started: Project: AutoUpdate, Configuration: Debug Any CPU ------
94>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
94>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
94>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
94>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\AutoUpdate\CS\ExternalApplication.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
94>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\AutoUpdate\CS\ExternalApplication.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
94>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\AutoUpdate\CS\ExternalApplication.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
94>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\AutoUpdate\CS\ExternalApplication.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
94>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\AutoUpdate\CS\ExternalApplication.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
94>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\AutoUpdate\CS\ExternalApplication.cs(46,40,46,60): error CS0246: The type or namespace name 'IExternalApplication' could not be found (are you missing a using directive or an assembly reference?)
94>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\AutoUpdate\CS\ExternalApplication.cs(43,6,43,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
94>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\AutoUpdate\CS\ExternalApplication.cs(44,6,44,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
94>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\AutoUpdate\CS\ExternalApplication.cs(45,6,45,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
94>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\AutoUpdate\CS\ExternalApplication.cs(43,44,43,52): error CS0103: The name 'Autodesk' does not exist in the current context
94>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\AutoUpdate\CS\ExternalApplication.cs(44,45,44,53): error CS0103: The name 'Autodesk' does not exist in the current context
94>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\AutoUpdate\CS\ExternalApplication.cs(45,43,45,51): error CS0103: The name 'Autodesk' does not exist in the current context
94>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\AutoUpdate\CS\ExternalApplication.cs(78,51,78,74): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
94>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\AutoUpdate\CS\ExternalApplication.cs(78,16,78,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
94>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\AutoUpdate\CS\ExternalApplication.cs(111,52,111,75): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
94>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\AutoUpdate\CS\ExternalApplication.cs(111,16,111,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
94>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\AutoUpdate\CS\ExternalApplication.cs(126,63,126,86): error CS0246: The type or namespace name 'DocumentOpenedEventArgs' could not be found (are you missing a using directive or an assembly reference?)
94>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\AutoUpdate\CS\ExternalApplication.cs(166,36,166,59): error CS0246: The type or namespace name 'DocumentOpenedEventArgs' could not be found (are you missing a using directive or an assembly reference?)
95>------ Rebuild All started: Project: AutoParameter, Configuration: Debug Any CPU ------
93>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
93>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
93>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
93>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\Command.cs(36,17,36,25): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
93>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\Command.cs(35,21,35,29): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
93>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\Command.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
93>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\Command.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
93>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\Command.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
93>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\Command.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
93>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\Command.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
93>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\Command.cs(34,7,34,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
93>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\TraversalTree.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
93>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\TraversalTree.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
93>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\TraversalTree.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
93>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\TraversalTree.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
93>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\Command.cs(46,28,46,44): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
93>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\Command.cs(43,6,43,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
93>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\Command.cs(44,6,44,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
93>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\Command.cs(45,6,45,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
93>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\Command.cs(43,44,43,52): error CS0103: The name 'Autodesk' does not exist in the current context
93>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\Command.cs(44,45,44,53): error CS0103: The name 'Autodesk' does not exist in the current context
93>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\Command.cs(45,43,45,51): error CS0103: The name 'Autodesk' does not exist in the current context
93>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\Command.cs(64,57,64,76): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
93>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\Command.cs(65,35,65,43): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
93>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\Command.cs(64,24,64,32): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
93>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\Command.cs(135,17,135,26): error CS0246: The type or namespace name 'MEPSystem' could not be found (are you missing a using directive or an assembly reference?)
93>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\Command.cs(190,62,190,74): error CS0246: The type or namespace name 'ConnectorSet' could not be found (are you missing a using directive or an assembly reference?)
93>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\Command.cs(190,24,190,33): error CS0246: The type or namespace name 'MEPSystem' could not be found (are you missing a using directive or an assembly reference?)
93>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\TraversalTree.cs(73,16,73,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
93>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\TraversalTree.cs(84,16,84,33): error CS0246: The type or namespace name 'FlowDirectionType' could not be found (are you missing a using directive or an assembly reference?)
93>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\TraversalTree.cs(129,16,129,25): error CS0246: The type or namespace name 'Connector' could not be found (are you missing a using directive or an assembly reference?)
93>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\TraversalTree.cs(160,40,160,48): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
93>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\TraversalTree.cs(160,17,160,24): error CS0246: The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)
93>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\TraversalTree.cs(148,25,148,33): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
93>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\TraversalTree.cs(148,39,148,47): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
93>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\TraversalTree.cs(43,17,43,25): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
93>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\TraversalTree.cs(50,17,50,34): error CS0246: The type or namespace name 'FlowDirectionType' could not be found (are you missing a using directive or an assembly reference?)
93>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\TraversalTree.cs(58,17,58,26): error CS0246: The type or namespace name 'Connector' could not be found (are you missing a using directive or an assembly reference?)
93>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\TraversalTree.cs(66,17,66,25): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
93>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\TraversalTree.cs(306,17,306,24): error CS0246: The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)
93>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\TraversalTree.cs(332,44,332,51): error CS0246: The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)
93>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\TraversalTree.cs(332,61,332,70): error CS0246: The type or namespace name 'Connector' could not be found (are you missing a using directive or an assembly reference?)
93>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\TraversalTree.cs(332,17,332,26): error CS0246: The type or namespace name 'Connector' could not be found (are you missing a using directive or an assembly reference?)
93>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\TraversalTree.cs(488,56,488,65): error CS0246: The type or namespace name 'Connector' could not be found (are you missing a using directive or an assembly reference?)
93>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\TraversalTree.cs(488,24,488,33): error CS0246: The type or namespace name 'Connector' could not be found (are you missing a using directive or an assembly reference?)
93>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\TraversalTree.cs(511,40,511,48): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
93>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\TraversalTree.cs(511,17,511,24): error CS0246: The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)
93>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\TraversalTree.cs(254,30,254,38): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
93>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\TraversalTree.cs(254,55,254,64): error CS0246: The type or namespace name 'MEPSystem' could not be found (are you missing a using directive or an assembly reference?)
93>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\TraversalTree.cs(239,17,239,25): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
93>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\TraverseSystem\CS\TraversalTree.cs(241,17,241,26): error CS0246: The type or namespace name 'MEPSystem' could not be found (are you missing a using directive or an assembly reference?)
96>------ Rebuild All started: Project: AllViews, Configuration: Debug Any CPU ------
95>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
95>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
95>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
95>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoParameter\CS\FamilyParameterAssigner.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
95>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoParameter\CS\FamilyParameterAssigner.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
95>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoParameter\CS\Command.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
95>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoParameter\CS\Command.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
95>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoParameter\CS\Command.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
95>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoParameter\CS\FamilyParameterAssigner.cs(64,38,64,46): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
95>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoParameter\CS\FamilyParameterAssigner.cs(64,90,64,98): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
95>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoParameter\CS\FamilyParameterAssigner.cs(42,15,42,23): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
95>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoParameter\CS\FamilyParameterAssigner.cs(43,15,43,28): error CS0246: The type or namespace name 'FamilyManager' could not be found (are you missing a using directive or an assembly reference?)
95>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoParameter\CS\FamilyParameterAssigner.cs(50,15,50,29): error CS0246: The type or namespace name 'DefinitionFile' could not be found (are you missing a using directive or an assembly reference?)
95>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoParameter\CS\FamilyParameterAssigner.cs(409,14,409,35): error CS0246: The type or namespace name 'BuiltInParameterGroup' could not be found (are you missing a using directive or an assembly reference?)
95>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoParameter\CS\FamilyParameterAssigner.cs(418,14,418,27): error CS0246: The type or namespace name 'ParameterType' could not be found (are you missing a using directive or an assembly reference?)
95>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoParameter\CS\FamilyParameterAssigner.cs(466,39,466,60): error CS0246: The type or namespace name 'BuiltInParameterGroup' could not be found (are you missing a using directive or an assembly reference?)
95>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoParameter\CS\FamilyParameterAssigner.cs(466,68,466,81): error CS0246: The type or namespace name 'ParameterType' could not be found (are you missing a using directive or an assembly reference?)
95>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoParameter\CS\FamilyParameterAssigner.cs(405,7,405,28): error CS0246: The type or namespace name 'BuiltInParameterGroup' could not be found (are you missing a using directive or an assembly reference?)
95>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoParameter\CS\FamilyParameterAssigner.cs(414,7,414,20): error CS0246: The type or namespace name 'ParameterType' could not be found (are you missing a using directive or an assembly reference?)
95>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoParameter\CS\Command.cs(42,40,42,56): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
95>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoParameter\CS\Command.cs(39,5,39,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
95>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoParameter\CS\Command.cs(40,5,40,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
95>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoParameter\CS\Command.cs(41,5,41,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
95>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoParameter\CS\Command.cs(39,43,39,51): error CS0103: The name 'Autodesk' does not exist in the current context
95>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoParameter\CS\Command.cs(40,44,40,52): error CS0103: The name 'Autodesk' does not exist in the current context
95>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoParameter\CS\Command.cs(41,42,41,50): error CS0103: The name 'Autodesk' does not exist in the current context
95>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoParameter\CS\Command.cs(63,47,63,66): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
95>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoParameter\CS\Command.cs(65,46,65,56): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
95>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoParameter\CS\Command.cs(63,14,63,22): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
95>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoParameter\CS\Command.cs(45,15,45,23): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
95>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoParameter\CS\Command.cs(143,42,143,58): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
95>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoParameter\CS\Command.cs(140,5,140,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
95>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoParameter\CS\Command.cs(141,5,141,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
95>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoParameter\CS\Command.cs(142,5,142,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
95>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoParameter\CS\Command.cs(140,43,140,51): error CS0103: The name 'Autodesk' does not exist in the current context
95>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoParameter\CS\Command.cs(141,44,141,52): error CS0103: The name 'Autodesk' does not exist in the current context
95>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoParameter\CS\Command.cs(142,42,142,50): error CS0103: The name 'Autodesk' does not exist in the current context
95>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoParameter\CS\Command.cs(164,47,164,66): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
95>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoParameter\CS\Command.cs(166,46,166,56): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
95>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoParameter\CS\Command.cs(164,14,164,22): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
95>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoParameter\CS\Command.cs(146,15,146,23): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
97>------ Rebuild All started: Project: AvoidObstruction, Configuration: Debug Any CPU ------
97>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
97>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
97>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
97>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Command.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
97>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Command.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
97>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Command.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
97>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Detector.cs(29,17,29,25): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
97>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Detector.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
97>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Detector.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
97>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Resolver.cs(34,17,34,25): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
97>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Resolver.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
97>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Resolver.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
97>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Resolver.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
97>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Resolver.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
97>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Resolver.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
97>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Resolver.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
97>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Section.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
97>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Section.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
97>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Command.cs(39,28,39,44): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
97>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Command.cs(36,6,36,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
97>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Command.cs(37,6,37,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
97>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Command.cs(38,6,38,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
97>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Command.cs(36,44,36,52): error CS0103: The name 'Autodesk' does not exist in the current context
97>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Command.cs(37,45,37,53): error CS0103: The name 'Autodesk' does not exist in the current context
97>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Command.cs(38,43,38,51): error CS0103: The name 'Autodesk' does not exist in the current context
97>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Command.cs(59,49,59,68): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
97>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Command.cs(59,102,59,110): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
97>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Command.cs(59,16,59,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
97>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Detector.cs(72,56,72,64): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
97>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Detector.cs(72,86,72,94): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
97>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Detector.cs(72,21,72,41): error CS0246: The type or namespace name 'ReferenceWithContext' could not be found (are you missing a using directive or an assembly reference?)
97>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Detector.cs(95,56,95,60): error CS0246: The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)
97>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Detector.cs(95,21,95,41): error CS0246: The type or namespace name 'ReferenceWithContext' could not be found (are you missing a using directive or an assembly reference?)
97>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Detector.cs(130,35,130,55): error CS0246: The type or namespace name 'ReferenceWithContext' could not be found (are you missing a using directive or an assembly reference?)
97>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Detector.cs(130,62,130,82): error CS0246: The type or namespace name 'ReferenceWithContext' could not be found (are you missing a using directive or an assembly reference?)
97>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Detector.cs(149,50,149,70): error CS0246: The type or namespace name 'ReferenceWithContext' could not be found (are you missing a using directive or an assembly reference?)
97>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Detector.cs(149,74,149,94): error CS0246: The type or namespace name 'ReferenceWithContext' could not be found (are you missing a using directive or an assembly reference?)
97>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Detector.cs(52,25,52,33): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
97>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Detector.cs(41,17,41,25): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
97>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Detector.cs(46,17,46,23): error CS0246: The type or namespace name 'View3D' could not be found (are you missing a using directive or an assembly reference?)
97>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Section.cs(78,16,78,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
97>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Section.cs(87,21,87,25): error CS0246: The type or namespace name 'Pipe' could not be found (are you missing a using directive or an assembly reference?)
97>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Section.cs(95,16,95,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
97>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Resolver.cs(125,28,125,32): error CS0246: The type or namespace name 'Pipe' could not be found (are you missing a using directive or an assembly reference?)
97>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Section.cs(106,16,106,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
97>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Resolver.cs(432,28,432,32): error CS0246: The type or namespace name 'Pipe' could not be found (are you missing a using directive or an assembly reference?)
97>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Section.cs(117,21,117,41): error CS0246: The type or namespace name 'ReferenceWithContext' could not be found (are you missing a using directive or an assembly reference?)
97>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Resolver.cs(105,61,105,69): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
97>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Resolver.cs(105,20,105,28): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
97>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Section.cs(151,56,151,76): error CS0246: The type or namespace name 'ReferenceWithContext' could not be found (are you missing a using directive or an assembly reference?)
97>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Section.cs(151,87,151,95): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
97>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Resolver.cs(249,27,249,31): error CS0246: The type or namespace name 'Pipe' could not be found (are you missing a using directive or an assembly reference?)
97>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Resolver.cs(249,43,249,63): error CS0246: The type or namespace name 'ReferenceWithContext' could not be found (are you missing a using directive or an assembly reference?)
97>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Section.cs(184,55,184,75): error CS0246: The type or namespace name 'ReferenceWithContext' could not be found (are you missing a using directive or an assembly reference?)
97>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Section.cs(184,82,184,102): error CS0246: The type or namespace name 'ReferenceWithContext' could not be found (are you missing a using directive or an assembly reference?)
97>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Section.cs(184,24,184,44): error CS0246: The type or namespace name 'ReferenceWithContext' could not be found (are you missing a using directive or an assembly reference?)
97>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Resolver.cs(270,30,270,34): error CS0246: The type or namespace name 'Pipe' could not be found (are you missing a using directive or an assembly reference?)
97>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Resolver.cs(270,15,270,19): error CS0246: The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)
97>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Section.cs(66,25,66,33): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
97>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Resolver.cs(370,37,370,41): error CS0246: The type or namespace name 'Pipe' could not be found (are you missing a using directive or an assembly reference?)
97>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Resolver.cs(370,65,370,73): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
97>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Resolver.cs(370,15,370,19): error CS0246: The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)
97>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Section.cs(39,17,39,25): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
97>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Resolver.cs(397,70,397,90): error CS0246: The type or namespace name 'ReferenceWithContext' could not be found (are you missing a using directive or an assembly reference?)
97>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Resolver.cs(397,15,397,35): error CS0246: The type or namespace name 'ReferenceWithContext' could not be found (are you missing a using directive or an assembly reference?)
97>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Resolver.cs(487,35,487,39): error CS0246: The type or namespace name 'Pipe' could not be found (are you missing a using directive or an assembly reference?)
97>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Resolver.cs(487,48,487,52): error CS0246: The type or namespace name 'Pipe' could not be found (are you missing a using directive or an assembly reference?)
97>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Section.cs(54,22,54,42): error CS0246: The type or namespace name 'ReferenceWithContext' could not be found (are you missing a using directive or an assembly reference?)
97>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Resolver.cs(499,39,499,43): error CS0246: The type or namespace name 'Pipe' could not be found (are you missing a using directive or an assembly reference?)
97>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Resolver.cs(499,50,499,58): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
97>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Resolver.cs(499,15,499,24): error CS0246: The type or namespace name 'Connector' could not be found (are you missing a using directive or an assembly reference?)
97>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Section.cs(60,22,60,26): error CS0246: The type or namespace name 'Pipe' could not be found (are you missing a using directive or an assembly reference?)
97>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Resolver.cs(519,41,519,45): error CS0246: The type or namespace name 'Pipe' could not be found (are you missing a using directive or an assembly reference?)
97>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Resolver.cs(519,52,519,60): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
97>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Resolver.cs(519,15,519,24): error CS0246: The type or namespace name 'Connector' could not be found (are you missing a using directive or an assembly reference?)
97>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Resolver.cs(66,23,66,42): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
97>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Resolver.cs(47,15,47,23): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
97>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Resolver.cs(52,15,52,26): error CS0246: The type or namespace name 'Application' could not be found (are you missing a using directive or an assembly reference?)
97>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AvoidObstruction\CS\Resolver.cs(60,7,60,23): error CS0246: The type or namespace name 'PipingSystemType' could not be found (are you missing a using directive or an assembly reference?)
98>------ Rebuild All started: Project: AutoJoin, Configuration: Debug Any CPU ------
96>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
96>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
96>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
96>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AllViews\CS\AllViews.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
96>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AllViews\CS\AllViews.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
96>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AllViews\CS\AllViews.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
96>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AllViews\CS\AllViews.cs(43,28,43,44): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
96>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AllViews\CS\AllViews.cs(40,6,40,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
96>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AllViews\CS\AllViews.cs(41,6,41,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
96>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AllViews\CS\AllViews.cs(42,6,42,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
96>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AllViews\CS\AllViews.cs(40,44,40,52): error CS0103: The name 'Autodesk' does not exist in the current context
96>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AllViews\CS\AllViews.cs(41,45,41,53): error CS0103: The name 'Autodesk' does not exist in the current context
96>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AllViews\CS\AllViews.cs(42,43,42,51): error CS0103: The name 'Autodesk' does not exist in the current context
96>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AllViews\CS\AllViews.cs(62,49,62,57): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
96>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AllViews\CS\AllViews.cs(63,33,63,41): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
96>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AllViews\CS\AllViews.cs(62,16,62,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
96>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AllViews\CS\AllViews.cs(169,34,169,42): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
96>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AllViews\CS\AllViews.cs(263,35,263,43): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
96>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AllViews\CS\AllViews.cs(304,37,304,45): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
96>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AllViews\CS\AllViews.cs(331,33,331,40): error CS0246: The type or namespace name 'ViewSet' could not be found (are you missing a using directive or an assembly reference?)
96>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AllViews\CS\AllViews.cs(331,48,331,57): error CS0246: The type or namespace name 'ViewSheet' could not be found (are you missing a using directive or an assembly reference?)
96>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AllViews\CS\AllViews.cs(377,48,377,61): error CS0246: The type or namespace name 'BoundingBoxUV' could not be found (are you missing a using directive or an assembly reference?)
96>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AllViews\CS\AllViews.cs(377,17,377,25): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
96>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AllViews\CS\AllViews.cs(389,40,389,53): error CS0246: The type or namespace name 'BoundingBoxUV' could not be found (are you missing a using directive or an assembly reference?)
96>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AllViews\CS\AllViews.cs(424,37,424,45): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
96>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AllViews\CS\AllViews.cs(159,25,159,33): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
96>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AllViews\CS\AllViews.cs(107,17,107,24): error CS0246: The type or namespace name 'ViewSet' could not be found (are you missing a using directive or an assembly reference?)
96>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AllViews\CS\AllViews.cs(108,17,108,24): error CS0246: The type or namespace name 'ViewSet' could not be found (are you missing a using directive or an assembly reference?)
96>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AllViews\CS\AllViews.cs(109,17,109,29): error CS0246: The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)
96>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AllViews\CS\AllViews.cs(110,23,110,30): error CS0246: The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)
99>------ Rebuild All started: Project: CreateAirHandler, Configuration: Debug Any CPU ------
98>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
98>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
98>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
98>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoJoin\CS\AutoJoin.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
98>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoJoin\CS\AutoJoin.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
98>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoJoin\CS\Command.cs(30,21,30,29): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
98>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoJoin\CS\Command.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
98>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoJoin\CS\Command.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
98>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoJoin\CS\Command.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
98>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoJoin\CS\Intersection.cs(29,25,29,33): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
98>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoJoin\CS\Intersection.cs(30,21,30,29): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
98>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoJoin\CS\Intersection.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
98>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoJoin\CS\Intersection.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
98>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoJoin\CS\AutoJoin.cs(49,25,49,33): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
98>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoJoin\CS\AutoJoin.cs(96,53,96,70): error CS0246: The type or namespace name 'CombinableElement' could not be found (are you missing a using directive or an assembly reference?)
98>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoJoin\CS\AutoJoin.cs(96,82,96,90): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
98>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoJoin\CS\AutoJoin.cs(96,16,96,31): error CS0246: The type or namespace name 'GeomCombination' could not be found (are you missing a using directive or an assembly reference?)
98>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoJoin\CS\AutoJoin.cs(185,34,185,51): error CS0246: The type or namespace name 'CombinableElement' could not be found (are you missing a using directive or an assembly reference?)
98>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoJoin\CS\AutoJoin.cs(185,62,185,79): error CS0246: The type or namespace name 'CombinableElement' could not be found (are you missing a using directive or an assembly reference?)
98>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoJoin\CS\AutoJoin.cs(196,22,196,39): error CS0246: The type or namespace name 'CombinableElement' could not be found (are you missing a using directive or an assembly reference?)
98>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoJoin\CS\Command.cs(41,28,41,44): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
98>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoJoin\CS\Command.cs(38,6,38,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
98>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoJoin\CS\Command.cs(39,6,39,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
98>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoJoin\CS\Command.cs(40,6,40,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
98>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoJoin\CS\Command.cs(38,44,38,52): error CS0103: The name 'Autodesk' does not exist in the current context
98>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoJoin\CS\Command.cs(39,45,39,53): error CS0103: The name 'Autodesk' does not exist in the current context
98>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoJoin\CS\Command.cs(40,43,40,51): error CS0103: The name 'Autodesk' does not exist in the current context
98>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoJoin\CS\Command.cs(62,57,62,76): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
98>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoJoin\CS\Command.cs(63,35,63,43): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
98>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoJoin\CS\Command.cs(62,24,62,32): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
98>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoJoin\CS\Intersection.cs(45,39,45,53): error CS0246: The type or namespace name 'GeometryObject' could not be found (are you missing a using directive or an assembly reference?)
98>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoJoin\CS\Intersection.cs(45,65,45,79): error CS0246: The type or namespace name 'GeometryObject' could not be found (are you missing a using directive or an assembly reference?)
98>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoJoin\CS\Intersection.cs(72,39,72,53): error CS0246: The type or namespace name 'GeometryObject' could not be found (are you missing a using directive or an assembly reference?)
98>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoJoin\CS\Intersection.cs(72,69,72,73): error CS0246: The type or namespace name 'Face' could not be found (are you missing a using directive or an assembly reference?)
98>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoJoin\CS\Intersection.cs(88,72,88,76): error CS0246: The type or namespace name 'Face' could not be found (are you missing a using directive or an assembly reference?)
98>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoJoin\CS\Intersection.cs(100,39,100,44): error CS0246: The type or namespace name 'Solid' could not be found (are you missing a using directive or an assembly reference?)
98>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoJoin\CS\Intersection.cs(100,57,100,61): error CS0246: The type or namespace name 'Face' could not be found (are you missing a using directive or an assembly reference?)
98>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoJoin\CS\Intersection.cs(108,40,108,54): error CS0246: The type or namespace name 'GeometryObject' could not be found (are you missing a using directive or an assembly reference?)
98>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoJoin\CS\Intersection.cs(108,70,108,75): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
98>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoJoin\CS\Intersection.cs(123,73,123,78): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
98>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoJoin\CS\Intersection.cs(136,40,136,45): error CS0246: The type or namespace name 'Solid' could not be found (are you missing a using directive or an assembly reference?)
98>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoJoin\CS\Intersection.cs(136,58,136,63): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
98>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoJoin\CS\Intersection.cs(144,40,144,44): error CS0246: The type or namespace name 'Face' could not be found (are you missing a using directive or an assembly reference?)
98>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\AutoJoin\CS\Intersection.cs(144,56,144,61): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
100>------ Rebuild All started: Project: TypeRegeneration, Configuration: Debug Any CPU ------
99>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
99>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
99>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
99>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateAirHandler\CS\Command.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
99>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateAirHandler\CS\Command.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
99>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateAirHandler\CS\Command.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
99>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateAirHandler\CS\Command.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
99>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateAirHandler\CS\Command.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
99>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateAirHandler\CS\Command.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
99>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateAirHandler\CS\Command.cs(41,27,41,43): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
99>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateAirHandler\CS\Command.cs(38,5,38,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
99>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateAirHandler\CS\Command.cs(39,5,39,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
99>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateAirHandler\CS\Command.cs(40,5,40,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
99>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateAirHandler\CS\Command.cs(38,43,38,51): error CS0103: The name 'Autodesk' does not exist in the current context
99>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateAirHandler\CS\Command.cs(39,44,39,52): error CS0103: The name 'Autodesk' does not exist in the current context
99>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateAirHandler\CS\Command.cs(40,42,40,50): error CS0103: The name 'Autodesk' does not exist in the current context
99>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateAirHandler\CS\Command.cs(179,47,179,66): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
99>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateAirHandler\CS\Command.cs(180,11,180,21): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
99>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateAirHandler\CS\Command.cs(179,14,179,22): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
99>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateAirHandler\CS\Command.cs(228,46,228,55): error CS0246: The type or namespace name 'Extrusion' could not be found (are you missing a using directive or an assembly reference?)
99>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateAirHandler\CS\Command.cs(228,19,228,29): error CS0246: The type or namespace name 'PlanarFace' could not be found (are you missing a using directive or an assembly reference?)
99>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateAirHandler\CS\Command.cs(46,22,46,30): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
99>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateAirHandler\CS\Command.cs(51,22,51,30): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
99>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateAirHandler\CS\Command.cs(56,15,56,32): error CS0246: The type or namespace name 'FamilyItemFactory' could not be found (are you missing a using directive or an assembly reference?)
99>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateAirHandler\CS\Command.cs(61,15,61,24): error CS0246: The type or namespace name 'Extrusion' could not be found (are you missing a using directive or an assembly reference?)
99>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateAirHandler\CS\Command.cs(66,15,66,37): error CS0246: The type or namespace name 'CombinableElementArray' could not be found (are you missing a using directive or an assembly reference?)
99>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateAirHandler\CS\Command.cs(72,15,72,23): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
99>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateAirHandler\CS\Command.cs(111,15,111,23): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
99>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateAirHandler\CS\Command.cs(159,15,159,26): error CS0246: The type or namespace name 'Transaction' could not be found (are you missing a using directive or an assembly reference?)
101>------ Rebuild All started: Project: ValidateParameters, Configuration: Debug Any CPU ------
101>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
101>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
101>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
101>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\ValidateParameters\CS\Command.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
101>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\ValidateParameters\CS\Command.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
101>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\ValidateParameters\CS\Command.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
101>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\ValidateParameters\CS\Application.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
101>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\ValidateParameters\CS\Application.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
101>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\ValidateParameters\CS\Application.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
101>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\ValidateParameters\CS\Application.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
101>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\ValidateParameters\CS\Command.cs(40,26,40,42): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
101>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\ValidateParameters\CS\Command.cs(37,6,37,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
101>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\ValidateParameters\CS\Command.cs(38,6,38,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
101>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\ValidateParameters\CS\Command.cs(39,6,39,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
101>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\ValidateParameters\CS\Command.cs(37,44,37,52): error CS0103: The name 'Autodesk' does not exist in the current context
101>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\ValidateParameters\CS\Command.cs(38,45,38,53): error CS0103: The name 'Autodesk' does not exist in the current context
101>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\ValidateParameters\CS\Command.cs(39,43,39,51): error CS0103: The name 'Autodesk' does not exist in the current context
101>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\ValidateParameters\CS\Command.cs(66,49,66,68): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
101>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\ValidateParameters\CS\Command.cs(68,46,68,56): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
101>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\ValidateParameters\CS\Command.cs(66,16,66,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
101>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\ValidateParameters\CS\Command.cs(99,55,99,68): error CS0246: The type or namespace name 'FamilyManager' could not be found (are you missing a using directive or an assembly reference?)
101>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\ValidateParameters\CS\Command.cs(46,9,46,22): error CS0246: The type or namespace name 'FamilyManager' could not be found (are you missing a using directive or an assembly reference?)
101>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\ValidateParameters\CS\Application.cs(42,24,42,44): error CS0246: The type or namespace name 'IExternalApplication' could not be found (are you missing a using directive or an assembly reference?)
101>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\ValidateParameters\CS\Application.cs(39,6,39,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
101>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\ValidateParameters\CS\Application.cs(40,6,40,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
101>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\ValidateParameters\CS\Application.cs(41,6,41,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
101>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\ValidateParameters\CS\Application.cs(39,44,39,52): error CS0103: The name 'Autodesk' does not exist in the current context
101>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\ValidateParameters\CS\Application.cs(40,45,40,53): error CS0103: The name 'Autodesk' does not exist in the current context
101>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\ValidateParameters\CS\Application.cs(41,43,41,51): error CS0103: The name 'Autodesk' does not exist in the current context
101>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\ValidateParameters\CS\Application.cs(57,51,57,74): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
101>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\ValidateParameters\CS\Application.cs(57,16,57,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
101>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\ValidateParameters\CS\Application.cs(83,52,83,75): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
101>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\ValidateParameters\CS\Application.cs(83,16,83,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
101>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\ValidateParameters\CS\Application.cs(102,64,102,72): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
101>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\ValidateParameters\CS\Application.cs(112,66,112,74): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
101>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\ValidateParameters\CS\Application.cs(121,41,121,49): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
102>------ Rebuild All started: Project: AutoRoute, Configuration: Debug Any CPU ------
100>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
100>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
100>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
100>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\TypeRegeneration\CS\Command.cs(25,7,25,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
100>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\TypeRegeneration\CS\Command.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
100>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\TypeRegeneration\CS\Command.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
100>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\TypeRegeneration\CS\Command.cs(42,28,42,44): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
100>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\TypeRegeneration\CS\Command.cs(39,6,39,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
100>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\TypeRegeneration\CS\Command.cs(40,6,40,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
100>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\TypeRegeneration\CS\Command.cs(41,6,41,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
100>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\TypeRegeneration\CS\Command.cs(39,44,39,52): error CS0103: The name 'Autodesk' does not exist in the current context
100>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\TypeRegeneration\CS\Command.cs(40,45,40,53): error CS0103: The name 'Autodesk' does not exist in the current context
100>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\TypeRegeneration\CS\Command.cs(41,43,41,51): error CS0103: The name 'Autodesk' does not exist in the current context
100>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\TypeRegeneration\CS\Command.cs(73,49,73,68): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
100>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\TypeRegeneration\CS\Command.cs(75,46,75,56): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
100>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\TypeRegeneration\CS\Command.cs(73,16,73,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
100>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\TypeRegeneration\CS\Command.cs(48,9,48,22): error CS0246: The type or namespace name 'FamilyManager' could not be found (are you missing a using directive or an assembly reference?)
103>------ Rebuild All started: Project: Ribbon, Configuration: Debug Any CPU ------
102>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
102>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
102>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
102>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs(34,14,34,22): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
102>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
102>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
102>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
102>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
102>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
102>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs(44,28,44,44): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
102>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs(41,6,41,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
102>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs(42,6,42,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
102>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs(43,6,43,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
102>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs(41,44,41,52): error CS0103: The name 'Autodesk' does not exist in the current context
102>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs(42,45,42,53): error CS0103: The name 'Autodesk' does not exist in the current context
102>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs(43,43,43,51): error CS0103: The name 'Autodesk' does not exist in the current context
102>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs(130,49,130,68): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
102>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs(131,13,131,23): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
102>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs(130,16,130,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
102>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs(377,48,377,57): error CS0246: The type or namespace name 'Connector' could not be found (are you missing a using directive or an assembly reference?)
102>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs(472,53,472,62): error CS0246: The type or namespace name 'Connector' could not be found (are you missing a using directive or an assembly reference?)
102>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs(472,73,472,82): error CS0246: The type or namespace name 'Connector' could not be found (are you missing a using directive or an assembly reference?)
102>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs(502,51,502,60): error CS0246: The type or namespace name 'Connector' could not be found (are you missing a using directive or an assembly reference?)
102>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs(502,68,502,77): error CS0246: The type or namespace name 'Connector' could not be found (are you missing a using directive or an assembly reference?)
102>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs(502,85,502,94): error CS0246: The type or namespace name 'Connector' could not be found (are you missing a using directive or an assembly reference?)
102>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs(562,45,562,54): error CS0246: The type or namespace name 'Connector' could not be found (are you missing a using directive or an assembly reference?)
102>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs(591,48,591,57): error CS0246: The type or namespace name 'Connector' could not be found (are you missing a using directive or an assembly reference?)
102>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs(686,53,686,62): error CS0246: The type or namespace name 'Connector' could not be found (are you missing a using directive or an assembly reference?)
102>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs(686,73,686,82): error CS0246: The type or namespace name 'Connector' could not be found (are you missing a using directive or an assembly reference?)
102>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs(716,51,716,60): error CS0246: The type or namespace name 'Connector' could not be found (are you missing a using directive or an assembly reference?)
102>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs(716,68,716,77): error CS0246: The type or namespace name 'Connector' could not be found (are you missing a using directive or an assembly reference?)
102>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs(716,85,716,94): error CS0246: The type or namespace name 'Connector' could not be found (are you missing a using directive or an assembly reference?)
102>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs(776,45,776,54): error CS0246: The type or namespace name 'Connector' could not be found (are you missing a using directive or an assembly reference?)
102>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs(802,22,802,31): error CS0246: The type or namespace name 'Connector' could not be found (are you missing a using directive or an assembly reference?)
102>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs(821,114,821,128): error CS0246: The type or namespace name 'DuctSystemType' could not be found (are you missing a using directive or an assembly reference?)
102>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs(821,17,821,33): error CS0246: The type or namespace name 'MechanicalSystem' could not be found (are you missing a using directive or an assembly reference?)
102>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs(49,24,49,35): error CS0246: The type or namespace name 'Application' could not be found (are you missing a using directive or an assembly reference?)
102>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs(54,24,54,32): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
102>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs(59,17,59,33): error CS0246: The type or namespace name 'MechanicalSystem' could not be found (are you missing a using directive or an assembly reference?)
102>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs(64,9,64,17): error CS0246: The type or namespace name 'DuctType' could not be found (are you missing a using directive or an assembly reference?)
102>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs(69,9,69,17): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
102>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs(74,9,74,18): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
102>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs(79,9,79,14): error CS0246: The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)
102>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs(859,20,859,29): error CS0246: The type or namespace name 'Connector' could not be found (are you missing a using directive or an assembly reference?)
102>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs(913,27,913,36): error CS0246: The type or namespace name 'Connector' could not be found (are you missing a using directive or an assembly reference?)
102>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs(931,27,931,39): error CS0246: The type or namespace name 'ConnectorSet' could not be found (are you missing a using directive or an assembly reference?)
102>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs(943,54,943,62): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
102>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs(943,27,943,39): error CS0246: The type or namespace name 'ConnectorSet' could not be found (are you missing a using directive or an assembly reference?)
102>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs(972,54,972,70): error CS0246: The type or namespace name 'ConnectorManager' could not be found (are you missing a using directive or an assembly reference?)
102>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs(972,27,972,36): error CS0246: The type or namespace name 'Connector' could not be found (are you missing a using directive or an assembly reference?)
102>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs(854,13,854,22): error CS0246: The type or namespace name 'Connector' could not be found (are you missing a using directive or an assembly reference?)
102>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs(1004,41,1004,48): error CS0246: The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)
102>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs(1013,41,1013,48): error CS0246: The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)
102>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs(1045,50,1045,66): error CS0246: The type or namespace name 'MechanicalSystem' could not be found (are you missing a using directive or an assembly reference?)
102>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs(1071,39,1071,47): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
102>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs(1081,43,1081,52): error CS0246: The type or namespace name 'MEPSystem' could not be found (are you missing a using directive or an assembly reference?)
102>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs(1107,43,1107,52): error CS0246: The type or namespace name 'Connector' could not be found (are you missing a using directive or an assembly reference?)
102>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs(1157,50,1157,66): error CS0246: The type or namespace name 'ConnectorManager' could not be found (are you missing a using directive or an assembly reference?)
102>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs(1174,45,1174,54): error CS0246: The type or namespace name 'Connector' could not be found (are you missing a using directive or an assembly reference?)
102>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs(1225,44,1225,53): error CS0246: The type or namespace name 'Connector' could not be found (are you missing a using directive or an assembly reference?)
102>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs(1248,43,1248,52): error CS0246: The type or namespace name 'Connector' could not be found (are you missing a using directive or an assembly reference?)
102>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs(1262,48,1262,60): error CS0246: The type or namespace name 'ConnectorSet' could not be found (are you missing a using directive or an assembly reference?)
102>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs(1300,47,1300,59): error CS0246: The type or namespace name 'ConnectorSet' could not be found (are you missing a using directive or an assembly reference?)
102>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AutoRoute\CS\Command.cs(1071,77,1071,85): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
103>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
103>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
103>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\Ribbon.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\Ribbon.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\Ribbon.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\Ribbon.cs(34,7,34,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\Ribbon.cs(35,7,35,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs(42,30,42,46): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs(39,5,39,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs(40,5,40,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs(41,5,41,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs(39,43,39,51): error CS0103: The name 'Autodesk' does not exist in the current context
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs(40,44,40,52): error CS0103: The name 'Autodesk' does not exist in the current context
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs(41,42,41,50): error CS0103: The name 'Autodesk' does not exist in the current context
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs(258,5,258,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs(259,5,259,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs(258,43,258,51): error CS0103: The name 'Autodesk' does not exist in the current context
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs(259,44,259,52): error CS0103: The name 'Autodesk' does not exist in the current context
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs(47,47,47,66): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs(49,46,49,56): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs(47,14,47,22): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs(270,31,270,47): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs(76,41,76,49): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs(76,17,76,25): error CS0246: The type or namespace name 'WallType' could not be found (are you missing a using directive or an assembly reference?)
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs(98,39,98,47): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs(98,17,98,22): error CS0246: The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs(121,45,121,53): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs(121,22,121,27): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs(134,39,134,47): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs(268,5,268,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs(269,5,269,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs(268,43,268,51): error CS0103: The name 'Autodesk' does not exist in the current context
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs(269,44,269,52): error CS0103: The name 'Autodesk' does not exist in the current context
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs(171,51,171,59): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs(171,22,171,27): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs(273,47,273,66): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs(275,46,275,56): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs(273,14,273,22): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs(188,48,188,56): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs(188,22,188,27): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs(205,48,205,56): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs(205,22,205,27): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs(297,30,297,46): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs(218,50,218,58): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs(218,22,218,27): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs(240,45,240,56): error CS0246: The type or namespace name 'RibbonPanel' could not be found (are you missing a using directive or an assembly reference?)
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs(240,14,240,24): error CS0246: The type or namespace name 'RibbonItem' could not be found (are you missing a using directive or an assembly reference?)
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs(44,21,44,31): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs(295,5,295,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs(296,5,296,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs(295,43,295,51): error CS0103: The name 'Autodesk' does not exist in the current context
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs(296,44,296,52): error CS0103: The name 'Autodesk' does not exist in the current context
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs(301,47,301,66): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs(303,46,303,56): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs(301,14,301,22): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs(360,32,360,48): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\Ribbon.cs(55,27,55,47): error CS0246: The type or namespace name 'IExternalApplication' could not be found (are you missing a using directive or an assembly reference?)
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs(358,5,358,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs(359,5,359,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs(358,43,358,51): error CS0103: The name 'Autodesk' does not exist in the current context
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs(359,44,359,52): error CS0103: The name 'Autodesk' does not exist in the current context
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs(364,47,364,66): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs(366,46,366,56): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs(364,14,364,22): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs(402,45,402,56): error CS0246: The type or namespace name 'RibbonPanel' could not be found (are you missing a using directive or an assembly reference?)
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs(402,14,402,24): error CS0246: The type or namespace name 'RibbonItem' could not be found (are you missing a using directive or an assembly reference?)
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs(424,25,424,41): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\Ribbon.cs(52,6,52,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\Ribbon.cs(53,6,53,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\Ribbon.cs(54,6,54,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\Ribbon.cs(52,44,52,52): error CS0103: The name 'Autodesk' does not exist in the current context
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\Ribbon.cs(53,45,53,53): error CS0103: The name 'Autodesk' does not exist in the current context
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\Ribbon.cs(54,43,54,51): error CS0103: The name 'Autodesk' does not exist in the current context
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\Ribbon.cs(77,51,77,74): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\Ribbon.cs(77,16,77,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\Ribbon.cs(106,52,106,75): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\Ribbon.cs(106,16,106,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\Ribbon.cs(134,46,134,69): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\Ribbon.cs(238,52,238,60): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs(422,5,422,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs(423,5,423,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs(422,43,422,51): error CS0103: The name 'Autodesk' does not exist in the current context
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs(423,44,423,52): error CS0103: The name 'Autodesk' does not exist in the current context
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\Ribbon.cs(262,49,262,80): error CS0246: The type or namespace name 'ComboBoxDropDownOpenedEventArgs' could not be found (are you missing a using directive or an assembly reference?)
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\Ribbon.cs(293,52,293,80): error CS0246: The type or namespace name 'TextBoxEnterPressedEventArgs' could not be found (are you missing a using directive or an assembly reference?)
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs(428,47,428,66): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs(430,46,430,56): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs(428,14,428,22): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\Ribbon.cs(62,16,62,29): error CS0246: The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs(328,30,328,46): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs(326,5,326,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs(327,5,327,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs(326,43,326,51): error CS0103: The name 'Autodesk' does not exist in the current context
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs(327,44,327,52): error CS0103: The name 'Autodesk' does not exist in the current context
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs(332,47,332,66): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs(334,46,334,56): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
103>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Ribbon\CS\AddInCommand.cs(332,14,332,22): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
104>------ Rebuild All started: Project: WindowWizard, Configuration: Debug Any CPU ------
105>------ Rebuild All started: Project: GenericModelCreation, Configuration: Debug Any CPU ------
105>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
105>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
105>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
105>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\GenericModelCreation\CS\Command.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
105>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\GenericModelCreation\CS\Command.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
105>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\GenericModelCreation\CS\Command.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
105>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\GenericModelCreation\CS\Command.cs(42,27,42,43): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
105>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\GenericModelCreation\CS\Command.cs(39,5,39,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
105>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\GenericModelCreation\CS\Command.cs(40,5,40,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
105>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\GenericModelCreation\CS\Command.cs(41,5,41,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
105>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\GenericModelCreation\CS\Command.cs(39,43,39,51): error CS0103: The name 'Autodesk' does not exist in the current context
105>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\GenericModelCreation\CS\Command.cs(40,44,40,52): error CS0103: The name 'Autodesk' does not exist in the current context
105>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\GenericModelCreation\CS\Command.cs(41,42,41,50): error CS0103: The name 'Autodesk' does not exist in the current context
105>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\GenericModelCreation\CS\Command.cs(74,47,74,66): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
105>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\GenericModelCreation\CS\Command.cs(76,46,76,56): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
105>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\GenericModelCreation\CS\Command.cs(74,14,74,22): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
105>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\GenericModelCreation\CS\Command.cs(394,46,394,54): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
105>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\GenericModelCreation\CS\Command.cs(394,76,394,84): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
105>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\GenericModelCreation\CS\Command.cs(394,16,394,27): error CS0246: The type or namespace name 'SketchPlane' could not be found (are you missing a using directive or an assembly reference?)
105>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\GenericModelCreation\CS\Command.cs(46,15,46,23): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
105>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\GenericModelCreation\CS\Command.cs(48,15,48,23): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
105>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\GenericModelCreation\CS\Command.cs(50,15,50,23): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
105>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\GenericModelCreation\CS\Command.cs(382,50,382,58): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
106>------ Rebuild All started: Project: AutoStamp, Configuration: Debug Any CPU ------
104>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
104>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
104>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\Command.cs(25,7,25,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\Command.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\Command.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreatAlignment.cs(24,7,24,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreatAlignment.cs(25,7,25,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreateDimension.cs(24,7,24,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreateDimension.cs(25,7,25,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreateDimension.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreateExtrusion.cs(24,7,24,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreateExtrusion.cs(25,7,25,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreateExtrusion.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\DoubleHungWinCreation.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\DoubleHungWinCreation.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\DoubleHungWinCreation.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\DoubleHungWinCreation.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\GeoHelper.cs(28,17,28,25): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\GeoHelper.cs(29,18,29,26): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\GeoHelper.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\GeoHelper.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreateReferencePlane.cs(24,7,24,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreateReferencePlane.cs(25,7,25,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\Utility.cs(25,7,25,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\Utility.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\Utility.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\Utility.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\WindowWizard.cs(25,7,25,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\WindowWizard.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\Command.cs(39,28,39,44): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\Command.cs(36,6,36,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\Command.cs(37,6,37,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\Command.cs(38,6,38,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\Command.cs(36,44,36,52): error CS0103: The name 'Autodesk' does not exist in the current context
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\Command.cs(37,45,37,53): error CS0103: The name 'Autodesk' does not exist in the current context
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\Command.cs(38,43,38,51): error CS0103: The name 'Autodesk' does not exist in the current context
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\Command.cs(58,49,58,68): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\Command.cs(60,46,60,56): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\Command.cs(58,16,58,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreatAlignment.cs(63,34,63,38): error CS0246: The type or namespace name 'View' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreatAlignment.cs(63,45,63,49): error CS0246: The type or namespace name 'Face' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreatAlignment.cs(63,57,63,61): error CS0246: The type or namespace name 'Face' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreatAlignment.cs(50,32,50,40): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreatAlignment.cs(38,9,38,17): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreatAlignment.cs(43,9,43,17): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreateDimension.cs(67,37,67,41): error CS0246: The type or namespace name 'View' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreateDimension.cs(67,48,67,62): error CS0246: The type or namespace name 'ReferencePlane' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreateDimension.cs(67,74,67,88): error CS0246: The type or namespace name 'ReferencePlane' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreateDimension.cs(67,100,67,114): error CS0246: The type or namespace name 'ReferencePlane' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreateDimension.cs(67,14,67,23): error CS0246: The type or namespace name 'Dimension' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreateDimension.cs(103,37,103,41): error CS0246: The type or namespace name 'View' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreateDimension.cs(103,48,103,62): error CS0246: The type or namespace name 'ReferencePlane' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreateDimension.cs(103,73,103,77): error CS0246: The type or namespace name 'Face' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreateDimension.cs(103,14,103,23): error CS0246: The type or namespace name 'Dimension' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreateDimension.cs(137,37,137,41): error CS0246: The type or namespace name 'View' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreateDimension.cs(137,48,137,52): error CS0246: The type or namespace name 'Face' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreateDimension.cs(137,60,137,64): error CS0246: The type or namespace name 'Face' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreateDimension.cs(137,14,137,23): error CS0246: The type or namespace name 'Dimension' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreateDimension.cs(52,30,52,41): error CS0246: The type or namespace name 'Application' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreateDimension.cs(52,47,52,55): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreateDimension.cs(39,7,39,15): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreateDimension.cs(44,7,44,18): error CS0246: The type or namespace name 'Application' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreateExtrusion.cs(74,14,74,24): error CS0246: The type or namespace name 'CurveArray' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreateExtrusion.cs(106,50,106,60): error CS0246: The type or namespace name 'CurveArray' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreateExtrusion.cs(106,14,106,24): error CS0246: The type or namespace name 'CurveArray' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreateExtrusion.cs(161,37,161,50): error CS0246: The type or namespace name 'CurveArrArray' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreateExtrusion.cs(161,66,161,80): error CS0246: The type or namespace name 'ReferencePlane' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreateExtrusion.cs(161,14,161,23): error CS0246: The type or namespace name 'Extrusion' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreateExtrusion.cs(57,30,57,41): error CS0246: The type or namespace name 'Application' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreateExtrusion.cs(57,47,57,55): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreateExtrusion.cs(39,7,39,15): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreateExtrusion.cs(44,7,44,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreateExtrusion.cs(49,7,49,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\DoubleHungWinCreation.cs(655,17,655,40): error CS0246: The type or namespace name 'FamilyElementVisibility' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\DoubleHungWinCreation.cs(155,60,155,79): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\DoubleHungWinCreation.cs(42,17,42,30): error CS0246: The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\DoubleHungWinCreation.cs(47,17,47,25): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\DoubleHungWinCreation.cs(52,17,52,30): error CS0246: The type or namespace name 'FamilyManager' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\DoubleHungWinCreation.cs(67,9,67,23): error CS0246: The type or namespace name 'ReferencePlane' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\DoubleHungWinCreation.cs(72,9,72,23): error CS0246: The type or namespace name 'ReferencePlane' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\DoubleHungWinCreation.cs(77,9,77,23): error CS0246: The type or namespace name 'ReferencePlane' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\DoubleHungWinCreation.cs(82,9,82,23): error CS0246: The type or namespace name 'ReferencePlane' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\DoubleHungWinCreation.cs(87,9,87,23): error CS0246: The type or namespace name 'ReferencePlane' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\DoubleHungWinCreation.cs(92,9,92,17): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\DoubleHungWinCreation.cs(97,9,97,17): error CS0246: The type or namespace name 'Category' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\DoubleHungWinCreation.cs(102,9,102,17): error CS0246: The type or namespace name 'Category' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\GeoHelper.cs(50,38,50,42): error CS0246: The type or namespace name 'Wall' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\GeoHelper.cs(50,49,50,53): error CS0246: The type or namespace name 'View' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\GeoHelper.cs(50,21,50,25): error CS0246: The type or namespace name 'Face' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\GeoHelper.cs(87,43,87,52): error CS0246: The type or namespace name 'Extrusion' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\GeoHelper.cs(87,64,87,68): error CS0246: The type or namespace name 'View' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\GeoHelper.cs(87,21,87,25): error CS0246: The type or namespace name 'Face' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\GeoHelper.cs(122,43,122,52): error CS0246: The type or namespace name 'FaceArray' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\GeoHelper.cs(122,22,122,26): error CS0246: The type or namespace name 'Face' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\GeoHelper.cs(151,43,151,52): error CS0246: The type or namespace name 'FaceArray' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\GeoHelper.cs(151,22,151,26): error CS0246: The type or namespace name 'Face' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\GeoHelper.cs(182,37,182,41): error CS0246: The type or namespace name 'Mesh' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\GeoHelper.cs(182,52,182,60): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\GeoHelper.cs(182,90,182,98): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\GeoHelper.cs(182,126,182,134): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\GeoHelper.cs(195,41,195,45): error CS0246: The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\GeoHelper.cs(223,53,223,61): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\GeoHelper.cs(223,87,223,95): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\GeoHelper.cs(223,21,223,29): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\GeoHelper.cs(235,32,235,40): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\GeoHelper.cs(235,63,235,71): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreateReferencePlane.cs(45,38,45,46): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreateReferencePlane.cs(45,52,45,66): error CS0246: The type or namespace name 'ReferencePlane' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreateReferencePlane.cs(45,73,45,77): error CS0246: The type or namespace name 'View' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreateReferencePlane.cs(45,84,45,92): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreateReferencePlane.cs(45,114,45,122): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\CreateReferencePlane.cs(45,16,45,30): error CS0246: The type or namespace name 'ReferencePlane' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\Utility.cs(44,69,44,82): error CS0246: The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\Utility.cs(44,87,44,95): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\Utility.cs(44,23,44,37): error CS0246: The type or namespace name 'ReferencePlane' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\Utility.cs(69,54,69,67): error CS0246: The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\Utility.cs(69,72,69,80): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\Utility.cs(69,23,69,27): error CS0246: The type or namespace name 'View' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\Utility.cs(94,46,94,59): error CS0246: The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\Utility.cs(94,64,94,72): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\Utility.cs(94,88,94,96): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\WindowWizard.cs(54,29,54,48): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
104>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\WindowWizard\CS\WindowWizard.cs(48,17,48,36): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
106>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
106>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
106>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
106>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\AutoStamp\CS\Application.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
106>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\AutoStamp\CS\Application.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
106>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\AutoStamp\CS\Application.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
106>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\AutoStamp\CS\EventsReactor.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
106>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\AutoStamp\CS\EventsReactor.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
106>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\AutoStamp\CS\EventsReactor.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
106>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\AutoStamp\CS\Application.cs(41,32,41,52): error CS0246: The type or namespace name 'IExternalApplication' could not be found (are you missing a using directive or an assembly reference?)
106>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\AutoStamp\CS\Application.cs(38,6,38,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
106>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\AutoStamp\CS\Application.cs(39,6,39,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
106>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\AutoStamp\CS\Application.cs(40,6,40,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
106>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\AutoStamp\CS\Application.cs(38,44,38,52): error CS0103: The name 'Autodesk' does not exist in the current context
106>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\AutoStamp\CS\Application.cs(39,45,39,53): error CS0103: The name 'Autodesk' does not exist in the current context
106>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\AutoStamp\CS\Application.cs(40,43,40,51): error CS0103: The name 'Autodesk' does not exist in the current context
106>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\AutoStamp\CS\Application.cs(57,51,57,74): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
106>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\AutoStamp\CS\Application.cs(57,16,57,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
106>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\AutoStamp\CS\Application.cs(71,52,71,75): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
106>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\AutoStamp\CS\Application.cs(71,16,71,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
106>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\AutoStamp\CS\EventsReactor.cs(110,52,110,60): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
106>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\AutoStamp\CS\EventsReactor.cs(177,51,177,59): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
106>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\AutoStamp\CS\EventsReactor.cs(235,48,235,65): error CS0246: The type or namespace name 'RevitAPIEventArgs' could not be found (are you missing a using directive or an assembly reference?)
106>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\AutoStamp\CS\EventsReactor.cs(269,42,269,46): error CS0246: The type or namespace name 'View' could not be found (are you missing a using directive or an assembly reference?)
106>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\AutoStamp\CS\EventsReactor.cs(66,9,66,17): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
107>------ Rebuild All started: Project: DWGFamilyCreation, Configuration: Debug Any CPU ------
108>------ Rebuild All started: Project: RayTraceBounce, Configuration: Debug Any CPU ------
108>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
108>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
108>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
108>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\RaytraceBounce\CS\RayTraceBounce.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
108>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\RaytraceBounce\CS\RayTraceBounce.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
108>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\RaytraceBounce\CS\RayTraceBounce.cs(34,7,34,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
108>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\RaytraceBounce\CS\RayTraceBounceForm.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
108>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\RaytraceBounce\CS\RayTraceBounceForm.cs(34,7,34,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
108>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\RaytraceBounce\CS\RayTraceBounceForm.cs(35,7,35,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
108>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\RaytraceBounce\CS\RayTraceBounce.cs(46,27,46,43): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
108>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\RaytraceBounce\CS\RayTraceBounce.cs(43,5,43,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
108>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\RaytraceBounce\CS\RayTraceBounce.cs(44,5,44,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
108>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\RaytraceBounce\CS\RayTraceBounce.cs(45,5,45,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
108>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\RaytraceBounce\CS\RayTraceBounce.cs(43,43,43,51): error CS0103: The name 'Autodesk' does not exist in the current context
108>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\RaytraceBounce\CS\RayTraceBounce.cs(44,44,44,52): error CS0103: The name 'Autodesk' does not exist in the current context
108>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\RaytraceBounce\CS\RayTraceBounce.cs(45,42,45,50): error CS0103: The name 'Autodesk' does not exist in the current context
108>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\RaytraceBounce\CS\RayTraceBounce.cs(77,47,77,66): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
108>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\RaytraceBounce\CS\RayTraceBounce.cs(77,100,77,108): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
108>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\RaytraceBounce\CS\RayTraceBounce.cs(77,14,77,22): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
108>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\RaytraceBounce\CS\RayTraceBounce.cs(52,7,52,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
108>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\RaytraceBounce\CS\RayTraceBounce.cs(57,7,57,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
108>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\RaytraceBounce\CS\RayTraceBounceForm.cs(310,80,310,100): error CS0246: The type or namespace name 'ReferenceWithContext' could not be found (are you missing a using directive or an assembly reference?)
108>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\RaytraceBounce\CS\RayTraceBounceForm.cs(310,14,310,22): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
108>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\RaytraceBounce\CS\RayTraceBounceForm.cs(354,28,354,36): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
108>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\RaytraceBounce\CS\RayTraceBounceForm.cs(354,59,354,67): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
108>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\RaytraceBounce\CS\RayTraceBounceForm.cs(354,88,354,96): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
108>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\RaytraceBounce\CS\RayTraceBounceForm.cs(136,33,136,52): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
108>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\RaytraceBounce\CS\RayTraceBounceForm.cs(136,66,136,74): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
108>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\RaytraceBounce\CS\RayTraceBounceForm.cs(73,15,73,23): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
108>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\RaytraceBounce\CS\RayTraceBounceForm.cs(78,15,78,23): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
108>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\RaytraceBounce\CS\RayTraceBounceForm.cs(83,15,83,23): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
108>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\RaytraceBounce\CS\RayTraceBounceForm.cs(88,15,88,23): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
108>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\RaytraceBounce\CS\RayTraceBounceForm.cs(103,15,103,19): error CS0246: The type or namespace name 'Face' could not be found (are you missing a using directive or an assembly reference?)
108>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\RaytraceBounce\CS\RayTraceBounceForm.cs(108,15,108,23): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
108>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\RaytraceBounce\CS\RayTraceBounceForm.cs(113,15,113,23): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
109>------ Rebuild All started: Project: ViewPrinter, Configuration: Debug Any CPU ------
107>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
107>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
107>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
107>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\DWGFamilyCreation\CS\Command.cs(31,25,31,33): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
107>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\DWGFamilyCreation\CS\Command.cs(30,17,30,25): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
107>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\DWGFamilyCreation\CS\Command.cs(32,18,32,26): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
107>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\DWGFamilyCreation\CS\Command.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
107>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\DWGFamilyCreation\CS\Command.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
107>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\DWGFamilyCreation\CS\Command.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
107>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\DWGFamilyCreation\CS\Command.cs(44,28,44,44): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
107>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\DWGFamilyCreation\CS\Command.cs(41,6,41,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
107>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\DWGFamilyCreation\CS\Command.cs(42,6,42,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
107>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\DWGFamilyCreation\CS\Command.cs(43,6,43,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
107>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\DWGFamilyCreation\CS\Command.cs(41,44,41,52): error CS0103: The name 'Autodesk' does not exist in the current context
107>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\DWGFamilyCreation\CS\Command.cs(42,45,42,53): error CS0103: The name 'Autodesk' does not exist in the current context
107>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\DWGFamilyCreation\CS\Command.cs(43,43,43,51): error CS0103: The name 'Autodesk' does not exist in the current context
107>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\DWGFamilyCreation\CS\Command.cs(71,49,71,68): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
107>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\DWGFamilyCreation\CS\Command.cs(72,29,72,37): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
107>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\DWGFamilyCreation\CS\Command.cs(71,16,71,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
107>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\DWGFamilyCreation\CS\Command.cs(151,17,151,21): error CS0246: The type or namespace name 'View' could not be found (are you missing a using directive or an assembly reference?)
107>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\DWGFamilyCreation\CS\Command.cs(49,9,49,17): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
107>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\DWGFamilyCreation\CS\Command.cs(53,9,53,17): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
110>------ Rebuild All started: Project: RvtSamples, Configuration: Debug Any CPU ------
110>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
110>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
110>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
110>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RvtSamples\CS\Application.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
110>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RvtSamples\CS\Application.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
110>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RvtSamples\CS\Application.cs(34,7,34,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
110>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RvtSamples\CS\Application.cs(44,32,44,52): error CS0246: The type or namespace name 'IExternalApplication' could not be found (are you missing a using directive or an assembly reference?)
110>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RvtSamples\CS\Application.cs(169,51,169,74): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
110>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RvtSamples\CS\Application.cs(169,16,169,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
110>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RvtSamples\CS\Application.cs(321,52,321,75): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
110>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RvtSamples\CS\Application.cs(321,16,321,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
110>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RvtSamples\CS\Application.cs(536,46,536,60): error CS0246: The type or namespace name 'PulldownButton' could not be found (are you missing a using directive or an assembly reference?)
110>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RvtSamples\CS\Application.cs(654,55,654,65): error CS0246: The type or namespace name 'RibbonItem' could not be found (are you missing a using directive or an assembly reference?)
110>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RvtSamples\CS\Application.cs(137,17,137,40): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
110>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RvtSamples\CS\Application.cs(141,36,141,50): error CS0246: The type or namespace name 'PulldownButton' could not be found (are you missing a using directive or an assembly reference?)
110>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RvtSamples\CS\Application.cs(153,9,153,20): error CS0246: The type or namespace name 'RibbonPanel' could not be found (are you missing a using directive or an assembly reference?)
111>------ Rebuild All started: Project: MeasurePanelArea, Configuration: Debug Any CPU ------
109>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
109>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
109>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
109>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewPrinter\CS\Command.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
109>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewPrinter\CS\Command.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
109>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewPrinter\CS\PrintMgr.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
109>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewPrinter\CS\PrintMgr.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
109>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewPrinter\CS\PrintMgr.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
109>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewPrinter\CS\PrintMgrForm.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
109>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewPrinter\CS\PrintSTP.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
109>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewPrinter\CS\PrintSTP.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
109>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewPrinter\CS\PrintSTP.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
109>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewPrinter\CS\PrintSetupForm.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
109>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewPrinter\CS\PrintSetupForm.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
109>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewPrinter\CS\SaveAsForm.cs(9,7,9,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
109>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewPrinter\CS\SaveAsForm.cs(10,7,10,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
109>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewPrinter\CS\ViewSheets.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
109>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewPrinter\CS\ViewSheets.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
109>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewPrinter\CS\Command.cs(41,28,41,44): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
109>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewPrinter\CS\Command.cs(38,6,38,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
109>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewPrinter\CS\Command.cs(39,6,39,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
109>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewPrinter\CS\Command.cs(40,6,40,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
109>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewPrinter\CS\Command.cs(38,44,38,52): error CS0103: The name 'Autodesk' does not exist in the current context
109>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewPrinter\CS\Command.cs(39,45,39,53): error CS0103: The name 'Autodesk' does not exist in the current context
109>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewPrinter\CS\Command.cs(40,43,40,51): error CS0103: The name 'Autodesk' does not exist in the current context
109>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewPrinter\CS\Command.cs(59,49,59,68): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
109>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewPrinter\CS\Command.cs(60,29,60,37): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
109>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewPrinter\CS\Command.cs(59,16,59,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
109>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewPrinter\CS\PrintMgr.cs(190,16,190,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
109>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewPrinter\CS\PrintMgr.cs(44,25,44,44): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
109>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewPrinter\CS\PrintMgr.cs(41,17,41,36): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
109>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewPrinter\CS\PrintMgr.cs(42,17,42,29): error CS0246: The type or namespace name 'PrintManager' could not be found (are you missing a using directive or an assembly reference?)
109>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewPrinter\CS\PrintSTP.cs(218,16,218,35): error CS0246: The type or namespace name 'PageOrientationType' could not be found (are you missing a using directive or an assembly reference?)
109>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewPrinter\CS\PrintSTP.cs(230,16,230,34): error CS0246: The type or namespace name 'PaperPlacementType' could not be found (are you missing a using directive or an assembly reference?)
109>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewPrinter\CS\PrintSTP.cs(250,16,250,26): error CS0246: The type or namespace name 'MarginType' could not be found (are you missing a using directive or an assembly reference?)
109>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewPrinter\CS\PrintSTP.cs(286,16,286,35): error CS0246: The type or namespace name 'HiddenLineViewsType' could not be found (are you missing a using directive or an assembly reference?)
109>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewPrinter\CS\PrintSTP.cs(310,16,310,24): error CS0246: The type or namespace name 'ZoomType' could not be found (are you missing a using directive or an assembly reference?)
109>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewPrinter\CS\PrintSTP.cs(330,16,330,33): error CS0246: The type or namespace name 'RasterQualityType' could not be found (are you missing a using directive or an assembly reference?)
109>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewPrinter\CS\PrintSTP.cs(350,16,350,30): error CS0246: The type or namespace name 'ColorDepthType' could not be found (are you missing a using directive or an assembly reference?)
109>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewPrinter\CS\PrintSTP.cs(45,25,45,37): error CS0246: The type or namespace name 'PrintManager' could not be found (are you missing a using directive or an assembly reference?)
109>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewPrinter\CS\PrintSTP.cs(46,15,46,34): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
109>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewPrinter\CS\PrintSTP.cs(42,17,42,36): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
109>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewPrinter\CS\PrintSTP.cs(43,17,43,29): error CS0246: The type or namespace name 'PrintManager' could not be found (are you missing a using directive or an assembly reference?)
109>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewPrinter\CS\ViewSheets.cs(214,21,214,29): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
109>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewPrinter\CS\ViewSheets.cs(85,27,85,35): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
109>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewPrinter\CS\ViewSheets.cs(82,9,82,17): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
109>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewPrinter\CS\ViewSheets.cs(83,9,83,25): error CS0246: The type or namespace name 'ViewSheetSetting' could not be found (are you missing a using directive or an assembly reference?)
112>------ Rebuild All started: Project: NewForm, Configuration: Debug Any CPU ------
111>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
111>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
111>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
111>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\MeasurePanelArea\CS\FormPanelArea.cs(34,15,34,23): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
111>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\MeasurePanelArea\CS\FormPanelArea.cs(35,17,35,25): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
111>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\MeasurePanelArea\CS\FormPanelArea.cs(36,18,36,26): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
111>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\MeasurePanelArea\CS\FormPanelArea.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
111>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\MeasurePanelArea\CS\FormPanelArea.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
111>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\MeasurePanelArea\CS\FormPanelArea.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
111>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\MeasurePanelArea\CS\Command.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
111>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\MeasurePanelArea\CS\Command.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
111>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\MeasurePanelArea\CS\FormPanelArea.cs(149,39,149,58): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
111>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\MeasurePanelArea\CS\FormPanelArea.cs(227,44,227,58): error CS0246: The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)
111>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\MeasurePanelArea\CS\FormPanelArea.cs(286,34,286,48): error CS0246: The type or namespace name 'DividedSurface' could not be found (are you missing a using directive or an assembly reference?)
111>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\MeasurePanelArea\CS\FormPanelArea.cs(104,27,104,46): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
111>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\MeasurePanelArea\CS\FormPanelArea.cs(48,7,48,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
111>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\MeasurePanelArea\CS\FormPanelArea.cs(52,7,52,17): error CS0246: The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)
111>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\MeasurePanelArea\CS\FormPanelArea.cs(91,12,91,26): error CS0246: The type or namespace name 'DividedSurface' could not be found (are you missing a using directive or an assembly reference?)
111>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\MeasurePanelArea\CS\Command.cs(38,36,38,52): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
111>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\MeasurePanelArea\CS\Command.cs(35,6,35,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
111>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\MeasurePanelArea\CS\Command.cs(36,6,36,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
111>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\MeasurePanelArea\CS\Command.cs(37,5,37,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
111>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\MeasurePanelArea\CS\Command.cs(35,44,35,52): error CS0103: The name 'Autodesk' does not exist in the current context
111>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\MeasurePanelArea\CS\Command.cs(36,45,36,53): error CS0103: The name 'Autodesk' does not exist in the current context
111>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\MeasurePanelArea\CS\Command.cs(37,42,37,50): error CS0103: The name 'Autodesk' does not exist in the current context
111>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\MeasurePanelArea\CS\Command.cs(56,47,56,66): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
111>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\MeasurePanelArea\CS\Command.cs(56,100,56,108): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
111>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\MeasurePanelArea\CS\Command.cs(56,14,56,22): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
113>------ Rebuild All started: Project: PanelEdgeLengthAngle, Configuration: Debug Any CPU ------
112>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
112>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
112>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
112>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
112>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
112>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
112>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
112>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs(41,37,41,53): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
112>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs(38,5,38,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
112>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs(39,5,39,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
112>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs(40,5,40,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
112>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs(38,43,38,51): error CS0103: The name 'Autodesk' does not exist in the current context
112>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs(39,44,39,52): error CS0103: The name 'Autodesk' does not exist in the current context
112>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs(40,42,40,50): error CS0103: The name 'Autodesk' does not exist in the current context
112>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs(60,47,60,66): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
112>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs(60,100,60,108): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
112>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs(60,14,60,22): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
112>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs(106,31,106,47): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
112>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs(104,5,104,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
112>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs(105,5,105,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
112>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs(104,43,104,51): error CS0103: The name 'Autodesk' does not exist in the current context
112>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs(105,44,105,52): error CS0103: The name 'Autodesk' does not exist in the current context
112>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs(125,47,125,66): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
112>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs(125,100,125,108): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
112>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs(125,14,125,22): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
112>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs(169,35,169,51): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
112>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs(167,5,167,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
112>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs(168,5,168,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
112>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs(167,43,167,51): error CS0103: The name 'Autodesk' does not exist in the current context
112>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs(168,44,168,52): error CS0103: The name 'Autodesk' does not exist in the current context
112>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs(188,47,188,66): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
112>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs(188,100,188,108): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
112>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs(188,14,188,22): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
112>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs(238,38,238,54): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
112>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs(236,5,236,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
112>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs(237,5,237,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
112>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs(236,43,236,51): error CS0103: The name 'Autodesk' does not exist in the current context
112>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs(237,44,237,52): error CS0103: The name 'Autodesk' does not exist in the current context
112>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs(257,47,257,66): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
112>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs(257,100,257,108): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
112>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs(257,14,257,22): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
112>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs(328,32,328,48): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
112>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs(326,5,326,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
112>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs(327,5,327,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
112>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs(326,43,326,51): error CS0103: The name 'Autodesk' does not exist in the current context
112>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs(327,44,327,52): error CS0103: The name 'Autodesk' does not exist in the current context
112>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs(347,47,347,66): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
112>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs(347,100,347,108): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
112>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs(347,14,347,22): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
112>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs(431,40,431,53): error CS0246: The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)
112>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs(431,59,431,67): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
112>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs(431,86,431,94): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
112>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs(431,113,431,121): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
112>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs(431,21,431,31): error CS0246: The type or namespace name 'ModelCurve' could not be found (are you missing a using directive or an assembly reference?)
112>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs(458,41,458,54): error CS0246: The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)
112>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs(458,60,458,68): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
112>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs(458,87,458,95): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
112>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs(458,21,458,31): error CS0246: The type or namespace name 'ModelCurve' could not be found (are you missing a using directive or an assembly reference?)
112>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs(479,41,479,54): error CS0246: The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)
112>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs(479,60,479,68): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
112>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs(479,87,479,95): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
112>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs(479,114,479,122): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
112>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\NewForm\CS\Command.cs(479,21,479,31): error CS0246: The type or namespace name 'ModelCurve' could not be found (are you missing a using directive or an assembly reference?)
114>------ Rebuild All started: Project: CreateTruss, Configuration: Debug Any CPU ------
113>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
113>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
113>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
113>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PanelEdgeLengthAngle\CS\Command.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
113>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PanelEdgeLengthAngle\CS\Command.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
113>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PanelEdgeLengthAngle\CS\Command.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
113>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PanelEdgeLengthAngle\CS\Command.cs(40,40,40,56): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
113>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PanelEdgeLengthAngle\CS\Command.cs(37,6,37,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
113>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PanelEdgeLengthAngle\CS\Command.cs(38,6,38,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
113>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PanelEdgeLengthAngle\CS\Command.cs(39,5,39,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
113>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PanelEdgeLengthAngle\CS\Command.cs(37,44,37,52): error CS0103: The name 'Autodesk' does not exist in the current context
113>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PanelEdgeLengthAngle\CS\Command.cs(38,45,38,53): error CS0103: The name 'Autodesk' does not exist in the current context
113>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PanelEdgeLengthAngle\CS\Command.cs(39,42,39,50): error CS0103: The name 'Autodesk' does not exist in the current context
113>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PanelEdgeLengthAngle\CS\Command.cs(67,47,67,66): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
113>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PanelEdgeLengthAngle\CS\Command.cs(67,100,67,108): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
113>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PanelEdgeLengthAngle\CS\Command.cs(67,14,67,22): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
113>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PanelEdgeLengthAngle\CS\Command.cs(95,55,95,69): error CS0246: The type or namespace name 'DividedSurface' could not be found (are you missing a using directive or an assembly reference?)
113>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PanelEdgeLengthAngle\CS\Command.cs(95,20,95,34): error CS0246: The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)
113>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PanelEdgeLengthAngle\CS\Command.cs(119,34,119,48): error CS0246: The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)
113>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PanelEdgeLengthAngle\CS\Command.cs(119,15,119,24): error CS0246: The type or namespace name 'EdgeArray' could not be found (are you missing a using directive or an assembly reference?)
113>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PanelEdgeLengthAngle\CS\Command.cs(171,30,171,39): error CS0246: The type or namespace name 'EdgeArray' could not be found (are you missing a using directive or an assembly reference?)
113>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PanelEdgeLengthAngle\CS\Command.cs(213,40,213,44): error CS0246: The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)
113>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PanelEdgeLengthAngle\CS\Command.cs(213,52,213,56): error CS0246: The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)
113>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PanelEdgeLengthAngle\CS\Command.cs(259,40,259,54): error CS0246: The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)
113>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PanelEdgeLengthAngle\CS\Command.cs(45,7,45,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
113>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PanelEdgeLengthAngle\CS\Command.cs(49,7,49,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
113>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PanelEdgeLengthAngle\CS\Command.cs(290,52,290,59): error CS0246: The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)
113>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PanelEdgeLengthAngle\CS\Command.cs(316,14,316,23): error CS0246: The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)
113>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PanelEdgeLengthAngle\CS\Command.cs(309,34,309,43): error CS0246: The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)
115>------ Rebuild All started: Project: DistanceToPanels, Configuration: Debug Any CPU ------
114>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
114>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
114>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
114>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateTruss\CS\CreateTruss.cs(34,17,34,25): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
114>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateTruss\CS\CreateTruss.cs(35,14,35,22): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
114>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateTruss\CS\CreateTruss.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
114>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateTruss\CS\CreateTruss.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
114>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateTruss\CS\CreateTruss.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
114>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateTruss\CS\CreateTruss.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
114>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateTruss\CS\CreateTruss.cs(46,27,46,43): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
114>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateTruss\CS\CreateTruss.cs(43,5,43,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
114>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateTruss\CS\CreateTruss.cs(44,5,44,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
114>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateTruss\CS\CreateTruss.cs(45,5,45,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
114>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateTruss\CS\CreateTruss.cs(43,43,43,51): error CS0103: The name 'Autodesk' does not exist in the current context
114>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateTruss\CS\CreateTruss.cs(44,44,44,52): error CS0103: The name 'Autodesk' does not exist in the current context
114>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateTruss\CS\CreateTruss.cs(45,42,45,50): error CS0103: The name 'Autodesk' does not exist in the current context
114>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateTruss\CS\CreateTruss.cs(85,47,85,55): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
114>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateTruss\CS\CreateTruss.cs(87,61,87,71): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
114>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateTruss\CS\CreateTruss.cs(85,14,85,22): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
114>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateTruss\CS\CreateTruss.cs(249,41,249,49): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
114>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateTruss\CS\CreateTruss.cs(249,70,249,78): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
114>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateTruss\CS\CreateTruss.cs(249,97,249,108): error CS0246: The type or namespace name 'SketchPlane' could not be found (are you missing a using directive or an assembly reference?)
114>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateTruss\CS\CreateTruss.cs(249,122,249,136): error CS0246: The type or namespace name 'TrussCurveType' could not be found (are you missing a using directive or an assembly reference?)
114>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateTruss\CS\CreateTruss.cs(249,15,249,25): error CS0246: The type or namespace name 'ModelCurve' could not be found (are you missing a using directive or an assembly reference?)
114>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateTruss\CS\CreateTruss.cs(264,42,264,56): error CS0246: The type or namespace name 'ReferencePlane' could not be found (are you missing a using directive or an assembly reference?)
114>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateTruss\CS\CreateTruss.cs(264,15,264,19): error CS0246: The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)
114>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateTruss\CS\CreateTruss.cs(285,53,285,57): error CS0246: The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)
114>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateTruss\CS\CreateTruss.cs(285,65,285,69): error CS0246: The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)
114>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateTruss\CS\CreateTruss.cs(285,15,285,23): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
114>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateTruss\CS\CreateTruss.cs(51,22,51,30): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
114>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateTruss\CS\CreateTruss.cs(56,22,56,30): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
114>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateTruss\CS\CreateTruss.cs(61,15,61,23): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
114>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyCreation\CreateTruss\CS\CreateTruss.cs(66,15,66,23): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
116>------ Rebuild All started: Project: ManipulateForm, Configuration: Debug Any CPU ------
115>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
115>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
115>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
115>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\DistanceToPanels\CS\Command.cs(30,18,30,26): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
115>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\DistanceToPanels\CS\Command.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
115>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\DistanceToPanels\CS\Command.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
115>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\DistanceToPanels\CS\Command.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
115>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\DistanceToPanels\CS\Command.cs(41,37,41,53): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
115>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\DistanceToPanels\CS\Command.cs(38,6,38,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
115>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\DistanceToPanels\CS\Command.cs(39,6,39,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
115>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\DistanceToPanels\CS\Command.cs(40,6,40,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
115>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\DistanceToPanels\CS\Command.cs(38,44,38,52): error CS0103: The name 'Autodesk' does not exist in the current context
115>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\DistanceToPanels\CS\Command.cs(39,45,39,53): error CS0103: The name 'Autodesk' does not exist in the current context
115>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\DistanceToPanels\CS\Command.cs(40,43,40,51): error CS0103: The name 'Autodesk' does not exist in the current context
115>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\DistanceToPanels\CS\Command.cs(68,49,68,68): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
115>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\DistanceToPanels\CS\Command.cs(68,102,68,110): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
115>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\DistanceToPanels\CS\Command.cs(68,16,68,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
115>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\DistanceToPanels\CS\Command.cs(138,46,138,56): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
115>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\DistanceToPanels\CS\Command.cs(138,9,138,17): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
115>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\DistanceToPanels\CS\Command.cs(46,9,46,17): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
115>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\DistanceToPanels\CS\Command.cs(50,9,50,17): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
115>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\DistanceToPanels\CS\Command.cs(161,54,161,61): error CS0246: The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)
116>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
116>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
116>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
116>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\ManipulateForm\CS\Command.cs(33,17,33,25): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
116>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\ManipulateForm\CS\Command.cs(32,21,32,29): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
116>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\ManipulateForm\CS\Command.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
116>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\ManipulateForm\CS\Command.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
116>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\ManipulateForm\CS\Command.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
116>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\ManipulateForm\CS\Command.cs(43,27,43,43): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
116>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\ManipulateForm\CS\Command.cs(40,5,40,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
116>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\ManipulateForm\CS\Command.cs(41,5,41,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
116>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\ManipulateForm\CS\Command.cs(42,5,42,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
116>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\ManipulateForm\CS\Command.cs(40,43,40,51): error CS0103: The name 'Autodesk' does not exist in the current context
116>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\ManipulateForm\CS\Command.cs(41,44,41,52): error CS0103: The name 'Autodesk' does not exist in the current context
116>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\ManipulateForm\CS\Command.cs(42,42,42,50): error CS0103: The name 'Autodesk' does not exist in the current context
116>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\ManipulateForm\CS\Command.cs(110,55,110,74): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
116>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\ManipulateForm\CS\Command.cs(111,33,111,41): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
116>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\ManipulateForm\CS\Command.cs(110,22,110,30): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
116>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\ManipulateForm\CS\Command.cs(163,15,163,19): error CS0246: The type or namespace name 'Form' could not be found (are you missing a using directive or an assembly reference?)
116>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\ManipulateForm\CS\Command.cs(185,15,185,29): error CS0246: The type or namespace name 'ReferenceArray' could not be found (are you missing a using directive or an assembly reference?)
116>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\ManipulateForm\CS\Command.cs(219,30,219,34): error CS0246: The type or namespace name 'Form' could not be found (are you missing a using directive or an assembly reference?)
116>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\ManipulateForm\CS\Command.cs(236,32,236,36): error CS0246: The type or namespace name 'Form' could not be found (are you missing a using directive or an assembly reference?)
116>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\ManipulateForm\CS\Command.cs(250,39,250,43): error CS0246: The type or namespace name 'Form' could not be found (are you missing a using directive or an assembly reference?)
116>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\ManipulateForm\CS\Command.cs(291,48,291,52): error CS0246: The type or namespace name 'Form' could not be found (are you missing a using directive or an assembly reference?)
116>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\ManipulateForm\CS\Command.cs(323,47,323,51): error CS0246: The type or namespace name 'Form' could not be found (are you missing a using directive or an assembly reference?)
116>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\ManipulateForm\CS\Command.cs(348,33,348,37): error CS0246: The type or namespace name 'Form' could not be found (are you missing a using directive or an assembly reference?)
116>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\ManipulateForm\CS\Command.cs(348,15,348,24): error CS0246: The type or namespace name 'Reference' could not be found (are you missing a using directive or an assembly reference?)
116>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\ManipulateForm\CS\Command.cs(377,39,377,43): error CS0246: The type or namespace name 'Form' could not be found (are you missing a using directive or an assembly reference?)
116>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\ManipulateForm\CS\Command.cs(377,50,377,58): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
116>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\ManipulateForm\CS\Command.cs(377,84,377,92): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
116>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\ManipulateForm\CS\Command.cs(377,15,377,19): error CS0246: The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)
116>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\ManipulateForm\CS\Command.cs(420,35,420,39): error CS0246: The type or namespace name 'Form' could not be found (are you missing a using directive or an assembly reference?)
116>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\ManipulateForm\CS\Command.cs(420,46,420,55): error CS0246: The type or namespace name 'Reference' could not be found (are you missing a using directive or an assembly reference?)
116>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\ManipulateForm\CS\Command.cs(420,74,420,82): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
116>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\ManipulateForm\CS\Command.cs(48,7,48,15): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
117>------ Rebuild All started: Project: HelloRevit (HelloRevit\CS\HelloRevit), Configuration: Debug Any CPU ------
118>------ Rebuild All started: Project: HelloRevit (HelloRevit\VB.NET\HelloRevit), Configuration: Debug Any CPU ------
118>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
118>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
117>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
117>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
117>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
117>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\HelloRevit\CS\Command.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
117>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\HelloRevit\CS\Command.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
117>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\HelloRevit\CS\Command.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
117>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\HelloRevit\CS\Command.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
117>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\HelloRevit\CS\Command.cs(41,28,41,44): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
117>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\HelloRevit\CS\Command.cs(38,6,38,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
117>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\HelloRevit\CS\Command.cs(39,6,39,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
117>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\HelloRevit\CS\Command.cs(40,6,40,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
117>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\HelloRevit\CS\Command.cs(38,44,38,52): error CS0103: The name 'Autodesk' does not exist in the current context
117>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\HelloRevit\CS\Command.cs(39,45,39,53): error CS0103: The name 'Autodesk' does not exist in the current context
117>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\HelloRevit\CS\Command.cs(40,43,40,51): error CS0103: The name 'Autodesk' does not exist in the current context
117>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\HelloRevit\CS\Command.cs(61,49,61,68): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
117>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\HelloRevit\CS\Command.cs(62,33,62,41): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
117>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\HelloRevit\CS\Command.cs(61,16,61,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
118>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\HelloRevit\VB.NET\HelloRevit.vb(24,9): error BC40056: Namespace or type specified in the Imports 'Autodesk' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.
118>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\HelloRevit\VB.NET\HelloRevit.vb(25,9): error BC40056: Namespace or type specified in the Imports 'Autodesk.Revit.DB' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.
118>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\HelloRevit\VB.NET\HelloRevit.vb(26,9): error BC40056: Namespace or type specified in the Imports 'Autodesk.Revit.UI' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.
118>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\HelloRevit\VB.NET\HelloRevit.vb(27,9): error BC40056: Namespace or type specified in the Imports 'Autodesk.Revit.ApplicationServices' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.
118>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\HelloRevit\VB.NET\HelloRevit.vb(56,50): error BC30002: Type 'Autodesk.Revit.UI.ExternalCommandData' is not defined.
118>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\HelloRevit\VB.NET\HelloRevit.vb(57,52): error BC30002: Type 'Autodesk.Revit.DB.ElementSet' is not defined.
118>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\HelloRevit\VB.NET\HelloRevit.vb(58,12): error BC30002: Type 'Autodesk.Revit.UI.Result' is not defined.
118>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\HelloRevit\VB.NET\HelloRevit.vb(58,48): error BC30002: Type 'Autodesk.Revit.UI.IExternalCommand' is not defined.
118>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\HelloRevit\VB.NET\HelloRevit.vb(38,16): error BC30002: Type 'Autodesk.Revit.UI.IExternalCommand' is not defined.
118>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\HelloRevit\VB.NET\HelloRevit.vb(33,2): error BC30002: Type 'Autodesk.Revit.Attributes.Transaction' is not defined.
118>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\HelloRevit\VB.NET\HelloRevit.vb(34,2): error BC30002: Type 'Autodesk.Revit.Attributes.Regeneration' is not defined.
118>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\HelloRevit\VB.NET\HelloRevit.vb(35,2): error BC30002: Type 'Autodesk.Revit.Attributes.Journaling' is not defined.
118>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\HelloRevit\VB.NET\HelloRevit.vb(33,40): error BC30451: 'Autodesk' is not declared. It may be inaccessible due to its protection level.
118>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\HelloRevit\VB.NET\HelloRevit.vb(34,41): error BC30451: 'Autodesk' is not declared. It may be inaccessible due to its protection level.
118>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\HelloRevit\VB.NET\HelloRevit.vb(35,39): error BC30451: 'Autodesk' is not declared. It may be inaccessible due to its protection level.
119>------ Rebuild All started: Project: Selections, Configuration: Debug Any CPU ------
120>------ Rebuild All started: Project: ChangesMonitor, Configuration: Debug Any CPU ------
119>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
119>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
119>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
119>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs(38,18,38,26): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
119>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs(36,19,36,27): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
119>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs(37,20,37,28): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
119>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
119>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
119>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
119>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
119>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
119>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs(34,7,34,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
119>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\SelectionFilters.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
119>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\SelectionFilters.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
119>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\SelectionFilters.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
119>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\SelectionFilters.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
119>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\SelectionManager.cs(32,19,32,27): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
119>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\SelectionManager.cs(33,20,33,28): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
119>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\SelectionManager.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
119>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\SelectionManager.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
119>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\SelectionManager.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
119>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\SelectionManager.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
119>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\SelectionManager.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
119>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs(50,35,50,43): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
119>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs(47,5,47,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
119>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs(48,5,48,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
119>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs(49,5,49,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
119>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs(47,43,47,51): error CS0103: The name 'Autodesk' does not exist in the current context
119>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs(48,44,48,52): error CS0103: The name 'Autodesk' does not exist in the current context
119>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs(49,42,49,50): error CS0103: The name 'Autodesk' does not exist in the current context
119>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs(77,29,77,37): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
119>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs(77,100,77,110): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
119>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs(77,14,77,20): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
119>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs(55,7,55,20): error CS0246: The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)
119>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs(59,7,59,17): error CS0246: The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)
119>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs(124,42,124,50): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
119>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs(122,5,122,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
119>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs(123,5,123,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
119>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs(122,43,122,51): error CS0103: The name 'Autodesk' does not exist in the current context
119>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs(123,44,123,52): error CS0103: The name 'Autodesk' does not exist in the current context
119>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs(151,29,151,37): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
119>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs(151,100,151,110): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
119>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs(151,14,151,20): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
119>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs(219,16,219,28): error CS0246: The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)
119>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs(129,7,129,20): error CS0246: The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)
119>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs(133,7,133,17): error CS0246: The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)
119>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs(236,46,236,54): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
119>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs(234,5,234,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
119>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs(235,5,235,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
119>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs(234,43,234,51): error CS0103: The name 'Autodesk' does not exist in the current context
119>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs(235,44,235,52): error CS0103: The name 'Autodesk' does not exist in the current context
119>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs(267,29,267,37): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
119>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs(267,100,267,110): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
119>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs(267,14,267,20): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
119>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs(325,46,325,54): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
119>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs(325,76,325,84): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
119>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs(325,16,325,27): error CS0246: The type or namespace name 'SketchPlane' could not be found (are you missing a using directive or an assembly reference?)
119>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs(241,7,241,20): error CS0246: The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)
119>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs(245,7,245,17): error CS0246: The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)
119>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs(347,35,347,43): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
119>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs(345,5,345,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
119>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs(346,5,346,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
119>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs(345,43,345,51): error CS0103: The name 'Autodesk' does not exist in the current context
119>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs(346,44,346,52): error CS0103: The name 'Autodesk' does not exist in the current context
119>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs(365,29,365,37): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
119>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs(365,100,365,110): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
119>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\Command.cs(365,14,365,20): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
119>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\SelectionFilters.cs(67,35,67,51): error CS0246: The type or namespace name 'ISelectionFilter' could not be found (are you missing a using directive or an assembly reference?)
119>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\SelectionFilters.cs(86,34,86,41): error CS0246: The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)
119>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\SelectionFilters.cs(97,36,97,45): error CS0246: The type or namespace name 'Reference' could not be found (are you missing a using directive or an assembly reference?)
119>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\SelectionFilters.cs(97,53,97,56): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
119>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\SelectionFilters.cs(76,31,76,39): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
119>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\SelectionFilters.cs(70,9,70,17): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
119>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\SelectionFilters.cs(108,37,108,53): error CS0246: The type or namespace name 'ISelectionFilter' could not be found (are you missing a using directive or an assembly reference?)
119>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\SelectionFilters.cs(127,34,127,41): error CS0246: The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)
119>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\SelectionFilters.cs(138,36,138,45): error CS0246: The type or namespace name 'Reference' could not be found (are you missing a using directive or an assembly reference?)
119>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\SelectionFilters.cs(138,53,138,56): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
119>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\SelectionFilters.cs(117,33,117,41): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
119>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\SelectionFilters.cs(111,9,111,17): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
119>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\SelectionManager.cs(106,16,106,23): error CS0246: The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)
119>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\SelectionManager.cs(123,16,123,19): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
119>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\SelectionManager.cs(224,35,224,42): error CS0246: The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)
119>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\SelectionManager.cs(224,49,224,52): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
119>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\SelectionManager.cs(143,33,143,52): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
119>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\SelectionManager.cs(68,9,68,28): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
119>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\SelectionManager.cs(72,9,72,22): error CS0246: The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)
119>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\SelectionManager.cs(76,9,76,19): error CS0246: The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)
119>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\SelectionManager.cs(80,9,80,17): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
119>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\SelectionManager.cs(84,9,84,12): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
119>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\SelectionManager.cs(102,9,102,16): error CS0246: The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)
119>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\SelectionManager.cs(118,9,118,12): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
119>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\SelectionFilters.cs(39,42,39,58): error CS0246: The type or namespace name 'ISelectionFilter' could not be found (are you missing a using directive or an assembly reference?)
119>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\SelectionFilters.cs(46,34,46,41): error CS0246: The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)
119>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\SelectionFilters.cs(57,36,57,45): error CS0246: The type or namespace name 'Reference' could not be found (are you missing a using directive or an assembly reference?)
119>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Selections\CS\SelectionFilters.cs(57,53,57,56): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
121>------ Rebuild All started: Project: PanelSchedule, Configuration: Debug Any CPU ------
120>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
120>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
120>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
120>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DocumentChanged\CS\ChangesMonitor.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
120>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DocumentChanged\CS\ChangesMonitor.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
120>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DocumentChanged\CS\ChangesMonitor.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
120>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DocumentChanged\CS\ChangesMonitor.cs(44,40,44,60): error CS0246: The type or namespace name 'IExternalApplication' could not be found (are you missing a using directive or an assembly reference?)
120>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DocumentChanged\CS\ChangesMonitor.cs(41,6,41,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
120>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DocumentChanged\CS\ChangesMonitor.cs(42,6,42,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
120>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DocumentChanged\CS\ChangesMonitor.cs(43,6,43,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
120>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DocumentChanged\CS\ChangesMonitor.cs(41,44,41,52): error CS0103: The name 'Autodesk' does not exist in the current context
120>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DocumentChanged\CS\ChangesMonitor.cs(42,45,42,53): error CS0103: The name 'Autodesk' does not exist in the current context
120>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DocumentChanged\CS\ChangesMonitor.cs(43,43,43,51): error CS0103: The name 'Autodesk' does not exist in the current context
120>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DocumentChanged\CS\ChangesMonitor.cs(99,33,99,56): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
120>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DocumentChanged\CS\ChangesMonitor.cs(99,16,99,22): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
120>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DocumentChanged\CS\ChangesMonitor.cs(127,34,127,57): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
120>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DocumentChanged\CS\ChangesMonitor.cs(127,16,127,22): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
120>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DocumentChanged\CS\ChangesMonitor.cs(142,53,142,61): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
120>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DocumentChanged\CS\ChangesMonitor.cs(176,39,176,48): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
120>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DocumentChanged\CS\ChangesMonitor.cs(176,53,176,61): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
120>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DocumentChanged\CS\ChangesMonitor.cs(53,24,53,45): error CS0246: The type or namespace name 'ControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
120>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DocumentChanged\CS\ChangesMonitor.cs(250,28,250,44): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
120>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DocumentChanged\CS\ChangesMonitor.cs(248,6,248,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
120>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DocumentChanged\CS\ChangesMonitor.cs(249,6,249,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
120>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DocumentChanged\CS\ChangesMonitor.cs(248,44,248,52): error CS0103: The name 'Autodesk' does not exist in the current context
120>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DocumentChanged\CS\ChangesMonitor.cs(249,45,249,53): error CS0103: The name 'Autodesk' does not exist in the current context
120>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DocumentChanged\CS\ChangesMonitor.cs(269,31,269,50): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
120>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DocumentChanged\CS\ChangesMonitor.cs(269,84,269,94): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
120>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DocumentChanged\CS\ChangesMonitor.cs(269,16,269,22): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
122>------ Rebuild All started: Project: PointCurveCreation, Configuration: Debug Any CPU ------
121>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
121>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
121>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
121>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\InstanceViewCreation.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
121>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\InstanceViewCreation.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
121>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\InstanceViewCreation.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
121>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\InstanceViewCreation.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
121>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\InstanceViewCreation.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
121>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\PanelScheduleExport.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
121>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\PanelScheduleExport.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
121>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\PanelScheduleExport.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
121>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\PanelScheduleExport.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
121>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\CSVTranslator.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
121>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\CSVTranslator.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
121>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\SheetImport.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
121>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\SheetImport.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
121>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\SheetImport.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
121>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\SheetImport.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
121>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\Translator.cs(25,7,25,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
121>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\Translator.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
121>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\Translator.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
121>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\HTMLTranslator.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
121>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\HTMLTranslator.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
121>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\HTMLTranslator.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
121>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\InstanceViewCreation.cs(40,41,40,57): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
121>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\InstanceViewCreation.cs(37,6,37,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
121>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\InstanceViewCreation.cs(38,6,38,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
121>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\InstanceViewCreation.cs(39,6,39,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
121>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\InstanceViewCreation.cs(37,44,37,52): error CS0103: The name 'Autodesk' does not exist in the current context
121>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\InstanceViewCreation.cs(38,45,38,53): error CS0103: The name 'Autodesk' does not exist in the current context
121>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\InstanceViewCreation.cs(39,43,39,51): error CS0103: The name 'Autodesk' does not exist in the current context
121>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\InstanceViewCreation.cs(58,57,58,76): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
121>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\InstanceViewCreation.cs(59,35,59,43): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
121>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\InstanceViewCreation.cs(58,24,58,32): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
121>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\PanelScheduleExport.cs(39,40,39,56): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
121>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\PanelScheduleExport.cs(36,6,36,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
121>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\PanelScheduleExport.cs(37,6,37,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
121>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\PanelScheduleExport.cs(38,6,38,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
121>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\PanelScheduleExport.cs(36,44,36,52): error CS0103: The name 'Autodesk' does not exist in the current context
121>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\PanelScheduleExport.cs(37,45,37,53): error CS0103: The name 'Autodesk' does not exist in the current context
121>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\PanelScheduleExport.cs(38,43,38,51): error CS0103: The name 'Autodesk' does not exist in the current context
121>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\PanelScheduleExport.cs(57,57,57,76): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
121>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\PanelScheduleExport.cs(58,35,58,43): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
121>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\PanelScheduleExport.cs(57,24,57,32): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
121>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\CSVTranslator.cs(89,55,89,72): error CS0246: The type or namespace name 'PanelScheduleView' could not be found (are you missing a using directive or an assembly reference?)
121>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\CSVTranslator.cs(89,81,89,92): error CS0246: The type or namespace name 'SectionType' could not be found (are you missing a using directive or an assembly reference?)
121>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\CSVTranslator.cs(41,30,41,47): error CS0246: The type or namespace name 'PanelScheduleView' could not be found (are you missing a using directive or an assembly reference?)
121>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\SheetImport.cs(39,25,39,41): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
121>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\SheetImport.cs(36,6,36,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
121>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\SheetImport.cs(37,6,37,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
121>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\SheetImport.cs(38,6,38,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
121>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\SheetImport.cs(36,44,36,52): error CS0103: The name 'Autodesk' does not exist in the current context
121>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\SheetImport.cs(37,45,37,53): error CS0103: The name 'Autodesk' does not exist in the current context
121>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\SheetImport.cs(38,43,38,51): error CS0103: The name 'Autodesk' does not exist in the current context
121>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\SheetImport.cs(57,57,57,76): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
121>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\SheetImport.cs(58,35,58,43): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
121>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\SheetImport.cs(57,24,57,32): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
121>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\Translator.cs(69,50,69,58): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
121>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\Translator.cs(69,82,69,99): error CS0246: The type or namespace name 'PanelScheduleView' could not be found (are you missing a using directive or an assembly reference?)
121>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\Translator.cs(69,108,69,119): error CS0246: The type or namespace name 'SectionType' could not be found (are you missing a using directive or an assembly reference?)
121>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\Translator.cs(39,19,39,36): error CS0246: The type or namespace name 'PanelScheduleView' could not be found (are you missing a using directive or an assembly reference?)
121>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\HTMLTranslator.cs(99,86,99,103): error CS0246: The type or namespace name 'PanelScheduleView' could not be found (are you missing a using directive or an assembly reference?)
121>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\HTMLTranslator.cs(99,112,99,123): error CS0246: The type or namespace name 'SectionType' could not be found (are you missing a using directive or an assembly reference?)
121>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PanelSchedule\CS\HTMLTranslator.cs(41,31,41,48): error CS0246: The type or namespace name 'PanelScheduleView' could not be found (are you missing a using directive or an assembly reference?)
122>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "Microsoft.Office.Interop.Excel". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
122>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
122>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
122>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
122>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs(28,17,28,23): error CS0234: The type or namespace name 'Office' does not exist in the namespace 'Microsoft' (are you missing an assembly reference?)
122>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
122>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
122>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
122>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs(41,35,41,51): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
122>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs(39,6,39,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
122>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs(40,6,40,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
122>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs(39,44,39,52): error CS0103: The name 'Autodesk' does not exist in the current context
122>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs(40,45,40,53): error CS0103: The name 'Autodesk' does not exist in the current context
122>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs(60,31,60,50): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
122>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs(60,84,60,94): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
122>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs(60,16,60,22): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
122>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs(59,16,59,23): error CS0246: The type or namespace name 'AddInId' could not be found (are you missing a using directive or an assembly reference?)
122>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs(103,34,103,50): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
122>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs(101,6,101,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
122>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs(102,6,102,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
122>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs(101,44,101,52): error CS0103: The name 'Autodesk' does not exist in the current context
122>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs(102,45,102,53): error CS0103: The name 'Autodesk' does not exist in the current context
122>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs(122,31,122,50): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
122>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs(122,84,122,94): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
122>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs(122,16,122,22): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
122>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs(105,16,105,23): error CS0246: The type or namespace name 'AddInId' could not be found (are you missing a using directive or an assembly reference?)
122>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs(154,36,154,52): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
122>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs(152,6,152,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
122>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs(153,6,153,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
122>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs(152,44,152,52): error CS0103: The name 'Autodesk' does not exist in the current context
122>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs(153,45,153,53): error CS0103: The name 'Autodesk' does not exist in the current context
122>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs(173,31,173,50): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
122>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs(173,84,173,94): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
122>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs(173,16,173,22): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
122>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs(156,16,156,23): error CS0246: The type or namespace name 'AddInId' could not be found (are you missing a using directive or an assembly reference?)
122>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs(209,39,209,55): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
122>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs(207,6,207,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
122>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs(208,6,208,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
122>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs(207,44,207,52): error CS0103: The name 'Autodesk' does not exist in the current context
122>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs(208,45,208,53): error CS0103: The name 'Autodesk' does not exist in the current context
122>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs(229,31,229,50): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
122>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs(229,84,229,94): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
122>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs(229,16,229,22): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
122>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs(211,16,211,23): error CS0246: The type or namespace name 'AddInId' could not be found (are you missing a using directive or an assembly reference?)
122>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs(261,30,261,46): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
122>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs(259,6,259,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
122>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs(260,6,260,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
122>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs(259,44,259,52): error CS0103: The name 'Autodesk' does not exist in the current context
122>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs(260,45,260,53): error CS0103: The name 'Autodesk' does not exist in the current context
122>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs(281,31,281,50): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
122>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs(281,84,281,94): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
122>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs(281,16,281,22): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
122>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs(263,16,263,23): error CS0246: The type or namespace name 'AddInId' could not be found (are you missing a using directive or an assembly reference?)
122>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs(313,34,313,50): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
122>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs(311,6,311,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
122>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs(312,6,312,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
122>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs(311,44,311,52): error CS0103: The name 'Autodesk' does not exist in the current context
122>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs(312,45,312,53): error CS0103: The name 'Autodesk' does not exist in the current context
122>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs(333,31,333,50): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
122>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs(333,84,333,94): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
122>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs(333,16,333,22): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
122>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs(315,16,315,23): error CS0246: The type or namespace name 'AddInId' could not be found (are you missing a using directive or an assembly reference?)
122>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs(367,34,367,50): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
122>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs(365,6,365,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
122>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs(366,6,366,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
122>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs(365,44,365,52): error CS0103: The name 'Autodesk' does not exist in the current context
122>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs(366,45,366,53): error CS0103: The name 'Autodesk' does not exist in the current context
122>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs(387,31,387,50): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
122>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs(387,84,387,94): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
122>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs(387,16,387,22): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
122>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\PointCurveCreation\CS\Command.cs(369,16,369,23): error CS0246: The type or namespace name 'AddInId' could not be found (are you missing a using directive or an assembly reference?)
123>------ Rebuild All started: Project: ParameterValuesFromImage, Configuration: Debug Any CPU ------
124>------ Rebuild All started: Project: MaterialQuantities, Configuration: Debug Any CPU ------
124>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
124>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
124>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
124>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialQuantities\CS\MaterialQuantities.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
124>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialQuantities\CS\MaterialQuantities.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
124>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialQuantities\CS\MaterialQuantities.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
124>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialQuantities\CS\MaterialQuantities.cs(43,28,43,44): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
124>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialQuantities\CS\MaterialQuantities.cs(39,6,39,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
124>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialQuantities\CS\MaterialQuantities.cs(40,6,40,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
124>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialQuantities\CS\MaterialQuantities.cs(41,6,41,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
124>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialQuantities\CS\MaterialQuantities.cs(39,44,39,52): error CS0103: The name 'Autodesk' does not exist in the current context
124>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialQuantities\CS\MaterialQuantities.cs(40,45,40,53): error CS0103: The name 'Autodesk' does not exist in the current context
124>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialQuantities\CS\MaterialQuantities.cs(41,43,41,51): error CS0103: The name 'Autodesk' does not exist in the current context
124>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialQuantities\CS\MaterialQuantities.cs(62,31,62,50): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
124>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialQuantities\CS\MaterialQuantities.cs(64,63,64,73): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
124>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialQuantities\CS\MaterialQuantities.cs(62,16,62,22): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
124>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialQuantities\CS\MaterialQuantities.cs(45,16,45,23): error CS0246: The type or namespace name 'AddInId' could not be found (are you missing a using directive or an assembly reference?)
124>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialQuantities\CS\MaterialQuantities.cs(96,17,96,25): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
124>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialQuantities\CS\MaterialQuantities.cs(178,33,178,41): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
124>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialQuantities\CS\MaterialQuantities.cs(278,46,278,55): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
124>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialQuantities\CS\MaterialQuantities.cs(279,56,279,65): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
124>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialQuantities\CS\MaterialQuantities.cs(317,59,317,66): error CS0246: The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)
124>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialQuantities\CS\MaterialQuantities.cs(393,50,393,59): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
124>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialQuantities\CS\MaterialQuantities.cs(163,25,163,32): error CS0246: The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)
124>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialQuantities\CS\MaterialQuantities.cs(413,28,413,37): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
124>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialQuantities\CS\MaterialQuantities.cs(413,50,413,59): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
124>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialQuantities\CS\MaterialQuantities.cs(418,28,418,37): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
124>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MaterialQuantities\CS\MaterialQuantities.cs(431,19,431,27): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
123>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
123>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
123>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
123>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\ParameterValuesFromImage\CS\Command.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
123>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\ParameterValuesFromImage\CS\Command.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
123>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\ParameterValuesFromImage\CS\Command.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
123>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\ParameterValuesFromImage\CS\Command.cs(40,51,40,67): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
123>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\ParameterValuesFromImage\CS\Command.cs(38,6,38,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
123>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\ParameterValuesFromImage\CS\Command.cs(39,6,39,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
123>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\ParameterValuesFromImage\CS\Command.cs(38,44,38,52): error CS0103: The name 'Autodesk' does not exist in the current context
123>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\ParameterValuesFromImage\CS\Command.cs(39,45,39,53): error CS0103: The name 'Autodesk' does not exist in the current context
123>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\ParameterValuesFromImage\CS\Command.cs(60,31,60,50): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
123>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\ParameterValuesFromImage\CS\Command.cs(60,84,60,94): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
123>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\ParameterValuesFromImage\CS\Command.cs(60,16,60,22): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
123>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\ParameterValuesFromImage\CS\Command.cs(42,16,42,23): error CS0246: The type or namespace name 'AddInId' could not be found (are you missing a using directive or an assembly reference?)
125>------ Rebuild All started: Project: FindColumns, Configuration: Debug Any CPU ------
126>------ Rebuild All started: Project: MeasureHeight, Configuration: Debug Any CPU ------
126>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
126>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
126>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
126>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\MeasureHeight\CS\MeasureHeight.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
126>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\MeasureHeight\CS\MeasureHeight.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
126>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\MeasureHeight\CS\MeasureHeight.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
126>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\MeasureHeight\CS\MeasureHeight.cs(41,28,41,44): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
126>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\MeasureHeight\CS\MeasureHeight.cs(38,6,38,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
126>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\MeasureHeight\CS\MeasureHeight.cs(39,6,39,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
126>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\MeasureHeight\CS\MeasureHeight.cs(40,6,40,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
126>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\MeasureHeight\CS\MeasureHeight.cs(38,44,38,52): error CS0103: The name 'Autodesk' does not exist in the current context
126>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\MeasureHeight\CS\MeasureHeight.cs(39,45,39,53): error CS0103: The name 'Autodesk' does not exist in the current context
126>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\MeasureHeight\CS\MeasureHeight.cs(40,43,40,51): error CS0103: The name 'Autodesk' does not exist in the current context
126>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\MeasureHeight\CS\MeasureHeight.cs(87,31,87,50): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
126>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\MeasureHeight\CS\MeasureHeight.cs(87,78,87,88): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
126>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\MeasureHeight\CS\MeasureHeight.cs(87,16,87,22): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
126>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\MeasureHeight\CS\MeasureHeight.cs(153,17,153,21): error CS0246: The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)
126>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\MeasureHeight\CS\MeasureHeight.cs(47,17,47,25): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
126>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\MeasureHeight\CS\MeasureHeight.cs(52,17,52,25): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
126>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\MeasureHeight\CS\MeasureHeight.cs(57,17,57,23): error CS0246: The type or namespace name 'View3D' could not be found (are you missing a using directive or an assembly reference?)
126>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\MeasureHeight\CS\MeasureHeight.cs(62,17,62,31): error CS0246: The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)
126>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\MeasureHeight\CS\MeasureHeight.cs(67,17,67,22): error CS0246: The type or namespace name 'Floor' could not be found (are you missing a using directive or an assembly reference?)
127>------ Rebuild All started: Project: ErrorHandling, Configuration: Debug Any CPU ------
125>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
125>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
125>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
125>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\FindColumns\CS\FindColumns.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
125>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\FindColumns\CS\FindColumns.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
125>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\FindColumns\CS\FindColumns.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
125>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\FindColumns\CS\FindColumns.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
125>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\FindColumns\CS\FindColumns.cs(39,28,39,44): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
125>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\FindColumns\CS\FindColumns.cs(37,6,37,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
125>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\FindColumns\CS\FindColumns.cs(38,6,38,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
125>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\FindColumns\CS\FindColumns.cs(37,44,37,52): error CS0103: The name 'Autodesk' does not exist in the current context
125>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\FindColumns\CS\FindColumns.cs(38,45,38,53): error CS0103: The name 'Autodesk' does not exist in the current context
125>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\FindColumns\CS\FindColumns.cs(95,49,95,68): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
125>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\FindColumns\CS\FindColumns.cs(97,62,97,70): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
125>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\FindColumns\CS\FindColumns.cs(95,16,95,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
125>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\FindColumns\CS\FindColumns.cs(162,56,162,60): error CS0246: The type or namespace name 'Wall' could not be found (are you missing a using directive or an assembly reference?)
125>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\FindColumns\CS\FindColumns.cs(174,50,174,54): error CS0246: The type or namespace name 'Wall' could not be found (are you missing a using directive or an assembly reference?)
125>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\FindColumns\CS\FindColumns.cs(195,56,195,60): error CS0246: The type or namespace name 'Wall' could not be found (are you missing a using directive or an assembly reference?)
125>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\FindColumns\CS\FindColumns.cs(195,67,195,80): error CS0246: The type or namespace name 'LocationCurve' could not be found (are you missing a using directive or an assembly reference?)
125>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\FindColumns\CS\FindColumns.cs(195,96,195,101): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
125>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\FindColumns\CS\FindColumns.cs(211,52,211,56): error CS0246: The type or namespace name 'Wall' could not be found (are you missing a using directive or an assembly reference?)
125>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\FindColumns\CS\FindColumns.cs(211,63,211,76): error CS0246: The type or namespace name 'LocationCurve' could not be found (are you missing a using directive or an assembly reference?)
125>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\FindColumns\CS\FindColumns.cs(211,92,211,97): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
125>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\FindColumns\CS\FindColumns.cs(232,45,232,48): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
125>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\FindColumns\CS\FindColumns.cs(232,59,232,62): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
125>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\FindColumns\CS\FindColumns.cs(232,92,232,96): error CS0246: The type or namespace name 'Wall' could not be found (are you missing a using directive or an assembly reference?)
125>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\FindColumns\CS\FindColumns.cs(245,58,245,62): error CS0246: The type or namespace name 'Wall' could not be found (are you missing a using directive or an assembly reference?)
125>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\FindColumns\CS\FindColumns.cs(245,69,245,82): error CS0246: The type or namespace name 'LocationCurve' could not be found (are you missing a using directive or an assembly reference?)
125>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\FindColumns\CS\FindColumns.cs(245,98,245,103): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
125>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\FindColumns\CS\FindColumns.cs(269,43,269,47): error CS0246: The type or namespace name 'Wall' could not be found (are you missing a using directive or an assembly reference?)
125>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\FindColumns\CS\FindColumns.cs(286,36,286,40): error CS0246: The type or namespace name 'Wall' could not be found (are you missing a using directive or an assembly reference?)
125>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\FindColumns\CS\FindColumns.cs(286,47,286,60): error CS0246: The type or namespace name 'LocationCurve' could not be found (are you missing a using directive or an assembly reference?)
125>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\FindColumns\CS\FindColumns.cs(286,17,286,20): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
125>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\FindColumns\CS\FindColumns.cs(304,46,304,66): error CS0246: The type or namespace name 'ReferenceWithContext' could not be found (are you missing a using directive or an assembly reference?)
125>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\FindColumns\CS\FindColumns.cs(304,98,304,102): error CS0246: The type or namespace name 'Wall' could not be found (are you missing a using directive or an assembly reference?)
125>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\FindColumns\CS\FindColumns.cs(348,34,348,39): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
125>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\FindColumns\CS\FindColumns.cs(348,17,348,20): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
125>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\FindColumns\CS\FindColumns.cs(362,39,362,43): error CS0246: The type or namespace name 'Wall' could not be found (are you missing a using directive or an assembly reference?)
125>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\FindColumns\CS\FindColumns.cs(362,50,362,63): error CS0246: The type or namespace name 'LocationCurve' could not be found (are you missing a using directive or an assembly reference?)
125>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\FindColumns\CS\FindColumns.cs(362,17,362,20): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
125>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\FindColumns\CS\FindColumns.cs(385,35,385,39): error CS0246: The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)
125>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\FindColumns\CS\FindColumns.cs(398,36,398,39): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
125>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\FindColumns\CS\FindColumns.cs(55,28,55,37): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
125>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\FindColumns\CS\FindColumns.cs(55,44,55,53): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
125>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\FindColumns\CS\FindColumns.cs(60,22,60,31): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
125>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\FindColumns\CS\FindColumns.cs(65,17,65,25): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
125>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\FindColumns\CS\FindColumns.cs(70,17,70,25): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
125>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FindReferencesByDirection\FindColumns\CS\FindColumns.cs(75,17,75,23): error CS0246: The type or namespace name 'View3D' could not be found (are you missing a using directive or an assembly reference?)
128>------ Rebuild All started: Project: ViewFilters, Configuration: Debug Any CPU ------
127>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
127>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
127>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
127>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ErrorHandling\CS\Command.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
127>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ErrorHandling\CS\Command.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
127>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ErrorHandling\CS\Command.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
127>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ErrorHandling\CS\Command.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
127>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ErrorHandling\CS\Command.cs(41,27,41,43): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
127>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ErrorHandling\CS\Command.cs(41,45,41,65): error CS0246: The type or namespace name 'IExternalApplication' could not be found (are you missing a using directive or an assembly reference?)
127>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ErrorHandling\CS\Command.cs(38,5,38,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
127>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ErrorHandling\CS\Command.cs(39,5,39,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
127>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ErrorHandling\CS\Command.cs(40,5,40,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
127>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ErrorHandling\CS\Command.cs(38,43,38,51): error CS0103: The name 'Autodesk' does not exist in the current context
127>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ErrorHandling\CS\Command.cs(39,44,39,52): error CS0103: The name 'Autodesk' does not exist in the current context
127>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ErrorHandling\CS\Command.cs(40,42,40,50): error CS0103: The name 'Autodesk' does not exist in the current context
127>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ErrorHandling\CS\Command.cs(74,32,74,55): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
127>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ErrorHandling\CS\Command.cs(74,14,74,20): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
127>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ErrorHandling\CS\Command.cs(84,31,84,54): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
127>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ErrorHandling\CS\Command.cs(84,14,84,20): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
127>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ErrorHandling\CS\Command.cs(133,47,133,66): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
127>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ErrorHandling\CS\Command.cs(134,27,134,35): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
127>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ErrorHandling\CS\Command.cs(133,14,133,22): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
127>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ErrorHandling\CS\Command.cs(254,54,254,62): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
127>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ErrorHandling\CS\Command.cs(289,15,289,20): error CS0246: The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)
127>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ErrorHandling\CS\Command.cs(46,21,46,40): error CS0246: The type or namespace name 'FailureDefinitionId' could not be found (are you missing a using directive or an assembly reference?)
127>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ErrorHandling\CS\Command.cs(50,21,50,40): error CS0246: The type or namespace name 'FailureDefinitionId' could not be found (are you missing a using directive or an assembly reference?)
127>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ErrorHandling\CS\Command.cs(54,15,54,32): error CS0246: The type or namespace name 'FailureDefinition' could not be found (are you missing a using directive or an assembly reference?)
127>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ErrorHandling\CS\Command.cs(58,15,58,32): error CS0246: The type or namespace name 'FailureDefinition' could not be found (are you missing a using directive or an assembly reference?)
127>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ErrorHandling\CS\Command.cs(62,15,62,26): error CS0246: The type or namespace name 'Application' could not be found (are you missing a using directive or an assembly reference?)
127>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ErrorHandling\CS\Command.cs(66,15,66,23): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
127>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ErrorHandling\CS\Command.cs(314,40,314,61): error CS0246: The type or namespace name 'IFailuresPreprocessor' could not be found (are you missing a using directive or an assembly reference?)
127>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ErrorHandling\CS\Command.cs(321,57,321,73): error CS0246: The type or namespace name 'FailuresAccessor' could not be found (are you missing a using directive or an assembly reference?)
127>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ErrorHandling\CS\Command.cs(321,14,321,37): error CS0246: The type or namespace name 'FailureProcessingResult' could not be found (are you missing a using directive or an assembly reference?)
127>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ErrorHandling\CS\Command.cs(366,37,366,55): error CS0246: The type or namespace name 'IFailuresProcessor' could not be found (are you missing a using directive or an assembly reference?)
127>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ErrorHandling\CS\Command.cs(372,27,372,35): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
127>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ErrorHandling\CS\Command.cs(381,54,381,70): error CS0246: The type or namespace name 'FailuresAccessor' could not be found (are you missing a using directive or an assembly reference?)
127>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ErrorHandling\CS\Command.cs(381,14,381,37): error CS0246: The type or namespace name 'FailureProcessingResult' could not be found (are you missing a using directive or an assembly reference?)
129>------ Rebuild All started: Project: DirectionCalculation, Configuration: Debug Any CPU ------
128>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
128>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
128>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
128>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\NewFilterForm.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
128>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\FilterData.cs(36,14,36,22): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
128>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\FilterData.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
128>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\FilterData.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
128>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\FilterData.cs(34,7,34,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
128>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\FilterData.cs(35,7,35,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
128>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\ViewFiltersForm.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
128>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\ViewFiltersForm.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
128>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\ViewFiltersForm.cs(34,7,34,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
128>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\Command.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
128>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\Command.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
128>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\Command.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
128>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\FilterUtil.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
128>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\FilterUtil.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
128>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\FilterUtil.cs(34,7,34,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
128>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\FilterUtil.cs(35,7,35,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
128>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\FilterData.cs(303,21,303,36): error CS0246: The type or namespace name 'BuiltInCategory' could not be found (are you missing a using directive or an assembly reference?)
128>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\FilterData.cs(311,22,311,31): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
128>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\FilterData.cs(328,50,328,59): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
128>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\FilterData.cs(368,27,368,35): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
128>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\FilterData.cs(369,25,369,40): error CS0246: The type or namespace name 'BuiltInCategory' could not be found (are you missing a using directive or an assembly reference?)
128>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\FilterData.cs(384,27,384,35): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
128>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\FilterData.cs(385,25,385,34): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
128>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\FilterData.cs(286,9,286,17): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
128>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\FilterData.cs(291,14,291,29): error CS0246: The type or namespace name 'BuiltInCategory' could not be found (are you missing a using directive or an assembly reference?)
128>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\FilterData.cs(479,54,479,65): error CS0246: The type or namespace name 'StorageType' could not be found (are you missing a using directive or an assembly reference?)
128>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\FilterData.cs(51,16,51,32): error CS0246: The type or namespace name 'BuiltInParameter' could not be found (are you missing a using directive or an assembly reference?)
128>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\FilterData.cs(66,16,66,27): error CS0246: The type or namespace name 'StorageType' could not be found (are you missing a using directive or an assembly reference?)
128>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\FilterData.cs(84,16,84,25): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
128>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\FilterData.cs(167,16,167,26): error CS0246: The type or namespace name 'FilterRule' could not be found (are you missing a using directive or an assembly reference?)
128>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\FilterData.cs(98,34,98,50): error CS0246: The type or namespace name 'BuiltInParameter' could not be found (are you missing a using directive or an assembly reference?)
128>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\FilterData.cs(117,34,117,50): error CS0246: The type or namespace name 'BuiltInParameter' could not be found (are you missing a using directive or an assembly reference?)
128>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\FilterData.cs(135,34,135,50): error CS0246: The type or namespace name 'BuiltInParameter' could not be found (are you missing a using directive or an assembly reference?)
128>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\FilterData.cs(152,34,152,50): error CS0246: The type or namespace name 'BuiltInParameter' could not be found (are you missing a using directive or an assembly reference?)
128>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\FilterData.cs(152,79,152,88): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
128>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\Command.cs(43,28,43,44): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
128>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\Command.cs(40,6,40,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
128>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\Command.cs(41,6,41,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
128>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\Command.cs(42,6,42,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
128>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\Command.cs(40,44,40,52): error CS0103: The name 'Autodesk' does not exist in the current context
128>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\Command.cs(41,45,41,53): error CS0103: The name 'Autodesk' does not exist in the current context
128>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\Command.cs(42,43,42,51): error CS0103: The name 'Autodesk' does not exist in the current context
128>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\Command.cs(61,49,61,57): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
128>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\Command.cs(62,68,62,78): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
128>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\Command.cs(61,16,61,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
128>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\ViewFiltersForm.cs(758,38,758,49): error CS0246: The type or namespace name 'StorageType' could not be found (are you missing a using directive or an assembly reference?)
128>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\ViewFiltersForm.cs(784,36,784,52): error CS0246: The type or namespace name 'BuiltInParameter' could not be found (are you missing a using directive or an assembly reference?)
128>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\ViewFiltersForm.cs(835,47,835,56): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
128>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\ViewFiltersForm.cs(853,29,853,45): error CS0246: The type or namespace name 'BuiltInParameter' could not be found (are you missing a using directive or an assembly reference?)
128>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\ViewFiltersForm.cs(884,47,884,63): error CS0246: The type or namespace name 'BuiltInParameter' could not be found (are you missing a using directive or an assembly reference?)
128>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\FilterUtil.cs(53,72,53,80): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
128>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\FilterUtil.cs(53,33,53,55): error CS0246: The type or namespace name 'ParameterFilterElement' could not be found (are you missing a using directive or an assembly reference?)
128>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\FilterUtil.cs(67,63,67,79): error CS0246: The type or namespace name 'BuiltInParameter' could not be found (are you missing a using directive or an assembly reference?)
128>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\FilterUtil.cs(67,87,67,97): error CS0246: The type or namespace name 'FilterRule' could not be found (are you missing a using directive or an assembly reference?)
128>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\FilterUtil.cs(109,46,109,71): error CS0246: The type or namespace name 'FilterStringRuleEvaluator' could not be found (are you missing a using directive or an assembly reference?)
128>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\FilterUtil.cs(140,46,140,72): error CS0246: The type or namespace name 'FilterNumericRuleEvaluator' could not be found (are you missing a using directive or an assembly reference?)
128>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\FilterUtil.cs(166,51,166,61): error CS0246: The type or namespace name 'FilterRule' could not be found (are you missing a using directive or an assembly reference?)
128>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\FilterUtil.cs(166,21,166,31): error CS0246: The type or namespace name 'FilterRule' could not be found (are you missing a using directive or an assembly reference?)
128>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\ViewFiltersForm.cs(81,32,81,40): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
128>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\FilterUtil.cs(190,76,190,86): error CS0246: The type or namespace name 'FilterRule' could not be found (are you missing a using directive or an assembly reference?)
128>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\FilterUtil.cs(190,21,190,34): error CS0246: The type or namespace name 'ElementFilter' could not be found (are you missing a using directive or an assembly reference?)
128>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\ViewFiltersForm.cs(48,9,48,17): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
128>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\FilterUtil.cs(214,84,214,97): error CS0246: The type or namespace name 'ElementFilter' could not be found (are you missing a using directive or an assembly reference?)
128>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ElementFilter\ViewFilters\CS\FilterUtil.cs(214,27,214,37): error CS0246: The type or namespace name 'FilterRule' could not be found (are you missing a using directive or an assembly reference?)
129>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
129>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
129>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
129>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\Commands.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
129>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\Commands.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
129>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\Commands.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
129>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\FindSouthFacing.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
129>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\FindSouthFacing.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
129>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\FindSouthFacing.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
129>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\FindSouthFacingWalls.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
129>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\FindSouthFacingWalls.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
129>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\FindSouthFacingWindows.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
129>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\FindSouthFacingWindows.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
129>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\FindSouthFacingWindows.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
129>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\Commands.cs(38,84,38,100): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
129>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\Commands.cs(35,5,35,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
129>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\Commands.cs(36,5,36,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
129>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\Commands.cs(37,5,37,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
129>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\Commands.cs(35,43,35,51): error CS0103: The name 'Autodesk' does not exist in the current context
129>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\Commands.cs(36,44,36,52): error CS0103: The name 'Autodesk' does not exist in the current context
129>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\Commands.cs(37,42,37,50): error CS0103: The name 'Autodesk' does not exist in the current context
129>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\Commands.cs(57,29,57,48): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
129>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\Commands.cs(59,61,59,71): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
129>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\Commands.cs(57,14,57,20): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
129>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\Commands.cs(40,14,40,21): error CS0246: The type or namespace name 'AddInId' could not be found (are you missing a using directive or an assembly reference?)
129>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\Commands.cs(77,81,77,97): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
129>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\Commands.cs(75,5,75,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
129>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\Commands.cs(76,5,76,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
130>------ Rebuild All started: Project: DistanceToSurfaces, Configuration: Debug Any CPU ------
129>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\Commands.cs(75,43,75,51): error CS0103: The name 'Autodesk' does not exist in the current context
129>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\Commands.cs(76,44,76,52): error CS0103: The name 'Autodesk' does not exist in the current context
129>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\Commands.cs(96,30,96,49): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
129>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\Commands.cs(98,62,98,72): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
129>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\Commands.cs(96,15,96,21): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
129>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\Commands.cs(79,14,79,21): error CS0246: The type or namespace name 'AddInId' could not be found (are you missing a using directive or an assembly reference?)
129>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\Commands.cs(116,88,116,104): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
129>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\Commands.cs(113,5,113,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
129>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\Commands.cs(114,5,114,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
129>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\Commands.cs(113,43,113,51): error CS0103: The name 'Autodesk' does not exist in the current context
129>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\Commands.cs(114,44,114,52): error CS0103: The name 'Autodesk' does not exist in the current context
129>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\Commands.cs(135,29,135,48): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
129>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\Commands.cs(137,61,137,71): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
129>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\Commands.cs(135,14,135,20): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
129>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\Commands.cs(118,14,118,21): error CS0246: The type or namespace name 'AddInId' could not be found (are you missing a using directive or an assembly reference?)
129>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\Commands.cs(155,85,155,101): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
129>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\Commands.cs(153,5,153,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
129>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\Commands.cs(154,5,154,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
129>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\Commands.cs(153,43,153,51): error CS0103: The name 'Autodesk' does not exist in the current context
129>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\Commands.cs(154,44,154,52): error CS0103: The name 'Autodesk' does not exist in the current context
129>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\Commands.cs(174,30,174,49): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
129>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\Commands.cs(176,62,176,72): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
129>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\Commands.cs(174,15,174,21): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
129>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\Commands.cs(157,14,157,21): error CS0246: The type or namespace name 'AddInId' could not be found (are you missing a using directive or an assembly reference?)
129>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\FindSouthFacing.cs(37,19,37,27): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
129>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\FindSouthFacing.cs(49,19,49,27): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
129>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\FindSouthFacing.cs(68,38,68,41): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
129>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\FindSouthFacing.cs(80,50,80,53): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
129>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\FindSouthFacing.cs(80,19,80,22): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
129>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\FindSouthFacing.cs(111,44,111,49): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
129>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\FindSouthFacing.cs(126,36,126,39): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
129>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\FindSouthFacing.cs(141,17,141,25): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
129>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\FindSouthFacing.cs(142,17,142,25): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
129>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\FindSouthFacingWalls.cs(37,8,37,16): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
129>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\FindSouthFacingWalls.cs(38,5,38,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
129>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\FindSouthFacingWalls.cs(39,8,39,16): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
129>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\FindSouthFacingWalls.cs(37,46,37,54): error CS0103: The name 'Autodesk' does not exist in the current context
129>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\FindSouthFacingWalls.cs(38,44,38,52): error CS0103: The name 'Autodesk' does not exist in the current context
129>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\FindSouthFacingWalls.cs(39,45,39,53): error CS0103: The name 'Autodesk' does not exist in the current context
129>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\FindSouthFacingWalls.cs(84,31,84,35): error CS0246: The type or namespace name 'Wall' could not be found (are you missing a using directive or an assembly reference?)
129>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\FindSouthFacingWalls.cs(100,35,100,46): error CS0246: The type or namespace name 'ElementType' could not be found (are you missing a using directive or an assembly reference?)
129>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\FindSouthFacingWalls.cs(114,48,114,52): error CS0246: The type or namespace name 'Wall' could not be found (are you missing a using directive or an assembly reference?)
129>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\FindSouthFacingWalls.cs(114,19,114,22): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
129>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\FindSouthFacingWindows.cs(79,31,79,45): error CS0246: The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)
129>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\FindSouthFacingWindows.cs(100,42,100,56): error CS0246: The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)
129>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\FindSouthFacingWindows.cs(100,19,100,22): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
129>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\FindSouthFacingWindows.cs(141,51,141,65): error CS0246: The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)
129>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DirectionCalculation\CS\FindSouthFacingWindows.cs(141,19,141,22): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
131>------ Rebuild All started: Project: SpatialFieldGradient, Configuration: Debug Any CPU ------
130>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
130>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
130>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
130>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\DistanceToSurfaces\CS\Command.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
130>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\DistanceToSurfaces\CS\Command.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
130>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\DistanceToSurfaces\CS\Command.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
130>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\DistanceToSurfaces\CS\Command.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
130>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\DistanceToSurfaces\CS\Command.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
130>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\DistanceToSurfaces\CS\Command.cs(37,38,37,58): error CS0246: The type or namespace name 'IExternalApplication' could not be found (are you missing a using directive or an assembly reference?)
130>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\DistanceToSurfaces\CS\Command.cs(35,5,35,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
130>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\DistanceToSurfaces\CS\Command.cs(36,5,36,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
130>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\DistanceToSurfaces\CS\Command.cs(35,43,35,51): error CS0103: The name 'Autodesk' does not exist in the current context
130>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\DistanceToSurfaces\CS\Command.cs(36,44,36,52): error CS0103: The name 'Autodesk' does not exist in the current context
130>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\DistanceToSurfaces\CS\Command.cs(39,31,39,54): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
130>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\DistanceToSurfaces\CS\Command.cs(39,14,39,20): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
130>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\DistanceToSurfaces\CS\Command.cs(45,43,45,66): error CS0246: The type or namespace name 'DocumentOpenedEventArgs' could not be found (are you missing a using directive or an assembly reference?)
130>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\DistanceToSurfaces\CS\Command.cs(84,32,84,55): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
130>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\DistanceToSurfaces\CS\Command.cs(84,14,84,20): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
130>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\DistanceToSurfaces\CS\Command.cs(87,39,87,47): error CS0246: The type or namespace name 'IUpdater' could not be found (are you missing a using directive or an assembly reference?)
130>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\DistanceToSurfaces\CS\Command.cs(100,27,100,38): error CS0246: The type or namespace name 'UpdaterData' could not be found (are you missing a using directive or an assembly reference?)
130>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\DistanceToSurfaces\CS\Command.cs(161,14,161,28): error CS0246: The type or namespace name 'ChangePriority' could not be found (are you missing a using directive or an assembly reference?)
130>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\DistanceToSurfaces\CS\Command.cs(162,14,162,23): error CS0246: The type or namespace name 'UpdaterId' could not be found (are you missing a using directive or an assembly reference?)
130>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\DistanceToSurfaces\CS\Command.cs(165,46,165,53): error CS0246: The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)
130>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\DistanceToSurfaces\CS\Command.cs(165,15,165,24): error CS0246: The type or namespace name 'FaceArray' could not be found (are you missing a using directive or an assembly reference?)
130>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\DistanceToSurfaces\CS\Command.cs(93,34,93,41): error CS0246: The type or namespace name 'AddInId' could not be found (are you missing a using directive or an assembly reference?)
130>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\DistanceToSurfaces\CS\Command.cs(93,46,93,55): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
130>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\DistanceToSurfaces\CS\Command.cs(93,64,93,73): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
130>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\DistanceToSurfaces\CS\Command.cs(89,7,89,14): error CS0246: The type or namespace name 'AddInId' could not be found (are you missing a using directive or an assembly reference?)
130>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\DistanceToSurfaces\CS\Command.cs(90,7,90,16): error CS0246: The type or namespace name 'UpdaterId' could not be found (are you missing a using directive or an assembly reference?)
130>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\DistanceToSurfaces\CS\Command.cs(91,7,91,16): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
130>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\DistanceToSurfaces\CS\Command.cs(92,7,92,16): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
131>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
131>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
131>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
131>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\SpatialFieldGradient\CS\Command.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
131>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\SpatialFieldGradient\CS\Command.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
131>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\SpatialFieldGradient\CS\Command.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
131>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\SpatialFieldGradient\CS\Command.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
131>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\SpatialFieldGradient\CS\Command.cs(35,40,35,56): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
131>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\SpatialFieldGradient\CS\Command.cs(33,5,33,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
131>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\SpatialFieldGradient\CS\Command.cs(34,5,34,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
131>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\SpatialFieldGradient\CS\Command.cs(33,43,33,51): error CS0103: The name 'Autodesk' does not exist in the current context
131>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\SpatialFieldGradient\CS\Command.cs(34,44,34,52): error CS0103: The name 'Autodesk' does not exist in the current context
131>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\SpatialFieldGradient\CS\Command.cs(38,47,38,66): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
131>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\SpatialFieldGradient\CS\Command.cs(38,100,38,110): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
131>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\SpatialFieldGradient\CS\Command.cs(38,14,38,22): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
131>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\SpatialFieldGradient\CS\Command.cs(37,14,37,21): error CS0246: The type or namespace name 'AddInId' could not be found (are you missing a using directive or an assembly reference?)
132>------ Rebuild All started: Project: DynamicModelUpdate, Configuration: Debug Any CPU ------
133>------ Rebuild All started: Project: SolidSolidCut, Configuration: Debug Any CPU ------
133>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
133>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
133>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
133>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SolidSolidCut\CS\Command.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
133>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SolidSolidCut\CS\Command.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
133>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SolidSolidCut\CS\Command.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
133>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SolidSolidCut\CS\Command.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
133>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SolidSolidCut\CS\Command.cs(41,24,41,40): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
133>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SolidSolidCut\CS\Command.cs(39,6,39,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
133>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SolidSolidCut\CS\Command.cs(40,6,40,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
133>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SolidSolidCut\CS\Command.cs(39,44,39,52): error CS0103: The name 'Autodesk' does not exist in the current context
133>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SolidSolidCut\CS\Command.cs(40,45,40,53): error CS0103: The name 'Autodesk' does not exist in the current context
133>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SolidSolidCut\CS\Command.cs(61,49,61,68): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
133>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SolidSolidCut\CS\Command.cs(62,33,62,41): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
133>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SolidSolidCut\CS\Command.cs(61,16,61,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
133>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SolidSolidCut\CS\Command.cs(116,26,116,42): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
133>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SolidSolidCut\CS\Command.cs(114,6,114,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
133>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SolidSolidCut\CS\Command.cs(115,6,115,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
133>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SolidSolidCut\CS\Command.cs(114,44,114,52): error CS0103: The name 'Autodesk' does not exist in the current context
133>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SolidSolidCut\CS\Command.cs(115,45,115,53): error CS0103: The name 'Autodesk' does not exist in the current context
133>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SolidSolidCut\CS\Command.cs(136,49,136,68): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
133>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SolidSolidCut\CS\Command.cs(137,33,137,41): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
133>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SolidSolidCut\CS\Command.cs(136,16,136,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
134>------ Rebuild All started: Project: DividedSurfaceByIntersects, Configuration: Debug Any CPU ------
132>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
132>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
132>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
132>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DynamicModelUpdate\CS\Application.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
132>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DynamicModelUpdate\CS\Application.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
132>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DynamicModelUpdate\CS\Application.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
132>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DynamicModelUpdate\CS\Application.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
132>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DynamicModelUpdate\CS\SectionUpdater.cs(25,7,25,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
132>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DynamicModelUpdate\CS\SectionUpdater.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
132>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DynamicModelUpdate\CS\SectionUpdater.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
132>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DynamicModelUpdate\CS\Application.cs(40,46,40,54): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
132>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DynamicModelUpdate\CS\Application.cs(52,16,52,32): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
132>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DynamicModelUpdate\CS\Application.cs(39,6,39,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
132>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DynamicModelUpdate\CS\Application.cs(39,44,39,52): error CS0103: The name 'Autodesk' does not exist in the current context
132>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DynamicModelUpdate\CS\Application.cs(161,69,161,93): error CS0246: The type or namespace name 'DocumentClosingEventArgs' could not be found (are you missing a using directive or an assembly reference?)
132>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DynamicModelUpdate\CS\Application.cs(52,41,52,60): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
132>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DynamicModelUpdate\CS\Application.cs(52,94,52,104): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
132>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DynamicModelUpdate\CS\Application.cs(52,9,52,15): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
132>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DynamicModelUpdate\CS\Application.cs(52,16,52,32): error CS0538: 'IExternalCommand' in explicit interface declaration is not an interface
132>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DynamicModelUpdate\CS\Application.cs(42,9,42,17): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
132>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DynamicModelUpdate\CS\Application.cs(43,9,43,19): error CS0246: The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)
132>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DynamicModelUpdate\CS\Application.cs(47,17,47,24): error CS0246: The type or namespace name 'AddInId' could not be found (are you missing a using directive or an assembly reference?)
132>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DynamicModelUpdate\CS\Application.cs(49,29,49,38): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
132>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DynamicModelUpdate\CS\Application.cs(50,24,50,33): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
132>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DynamicModelUpdate\CS\SectionUpdater.cs(35,35,35,43): error CS0246: The type or namespace name 'IUpdater' could not be found (are you missing a using directive or an assembly reference?)
132>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DynamicModelUpdate\CS\SectionUpdater.cs(43,32,43,40): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
132>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DynamicModelUpdate\CS\SectionUpdater.cs(50,44,50,52): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
132>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DynamicModelUpdate\CS\SectionUpdater.cs(50,63,50,72): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
132>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DynamicModelUpdate\CS\SectionUpdater.cs(50,86,50,95): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
132>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DynamicModelUpdate\CS\SectionUpdater.cs(50,107,50,114): error CS0246: The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)
132>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DynamicModelUpdate\CS\SectionUpdater.cs(64,29,64,40): error CS0246: The type or namespace name 'UpdaterData' could not be found (are you missing a using directive or an assembly reference?)
132>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DynamicModelUpdate\CS\SectionUpdater.cs(89,16,89,25): error CS0246: The type or namespace name 'UpdaterId' could not be found (are you missing a using directive or an assembly reference?)
132>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DynamicModelUpdate\CS\SectionUpdater.cs(104,16,104,30): error CS0246: The type or namespace name 'ChangePriority' could not be found (are you missing a using directive or an assembly reference?)
132>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DynamicModelUpdate\CS\SectionUpdater.cs(111,41,111,49): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
132>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DynamicModelUpdate\CS\SectionUpdater.cs(111,55,111,62): error CS0246: The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)
132>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DynamicModelUpdate\CS\SectionUpdater.cs(111,69,111,80): error CS0246: The type or namespace name 'ViewSection' could not be found (are you missing a using directive or an assembly reference?)
132>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DynamicModelUpdate\CS\SectionUpdater.cs(37,33,37,40): error CS0246: The type or namespace name 'AddInId' could not be found (are you missing a using directive or an assembly reference?)
132>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DynamicModelUpdate\CS\SectionUpdater.cs(193,17,193,26): error CS0246: The type or namespace name 'UpdaterId' could not be found (are you missing a using directive or an assembly reference?)
132>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DynamicModelUpdate\CS\SectionUpdater.cs(194,17,194,26): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
132>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DynamicModelUpdate\CS\SectionUpdater.cs(195,17,195,26): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
132>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DynamicModelUpdate\CS\SectionUpdater.cs(196,17,196,24): error CS0246: The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)
135>------ Rebuild All started: Project: CreateFillPattern, Configuration: Debug Any CPU ------
134>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
134>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
134>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
134>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\DividedSurfaceByIntersects\CS\Command.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
134>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\DividedSurfaceByIntersects\CS\Command.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
134>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\DividedSurfaceByIntersects\CS\Command.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
134>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\DividedSurfaceByIntersects\CS\Command.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
134>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\DividedSurfaceByIntersects\CS\Command.cs(40,27,40,43): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
134>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\DividedSurfaceByIntersects\CS\Command.cs(37,5,37,16): error CS0246: The type or namespace name 'TransactionAttribute' could not be found (are you missing a using directive or an assembly reference?)
134>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\DividedSurfaceByIntersects\CS\Command.cs(37,5,37,16): error CS0246: The type or namespace name 'Transaction' could not be found (are you missing a using directive or an assembly reference?)
134>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\DividedSurfaceByIntersects\CS\Command.cs(38,5,38,17): error CS0246: The type or namespace name 'RegenerationAttribute' could not be found (are you missing a using directive or an assembly reference?)
134>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\DividedSurfaceByIntersects\CS\Command.cs(38,5,38,17): error CS0246: The type or namespace name 'Regeneration' could not be found (are you missing a using directive or an assembly reference?)
134>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\DividedSurfaceByIntersects\CS\Command.cs(39,5,39,15): error CS0246: The type or namespace name 'JournalingAttribute' could not be found (are you missing a using directive or an assembly reference?)
134>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\DividedSurfaceByIntersects\CS\Command.cs(39,5,39,15): error CS0246: The type or namespace name 'Journaling' could not be found (are you missing a using directive or an assembly reference?)
134>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\DividedSurfaceByIntersects\CS\Command.cs(37,17,37,32): error CS0103: The name 'TransactionMode' does not exist in the current context
134>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\DividedSurfaceByIntersects\CS\Command.cs(38,18,38,36): error CS0103: The name 'RegenerationOption' does not exist in the current context
134>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\DividedSurfaceByIntersects\CS\Command.cs(39,16,39,30): error CS0103: The name 'JournalingMode' does not exist in the current context
134>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\DividedSurfaceByIntersects\CS\Command.cs(63,47,63,66): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
134>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\DividedSurfaceByIntersects\CS\Command.cs(63,100,63,108): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
134>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\DividedSurfaceByIntersects\CS\Command.cs(63,14,63,22): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
134>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\DividedSurfaceByIntersects\CS\Command.cs(119,15,119,29): error CS0246: The type or namespace name 'DividedSurface' could not be found (are you missing a using directive or an assembly reference?)
134>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\DividedSurfaceByIntersects\CS\Command.cs(124,27,124,36): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
134>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\DividedSurfaceByIntersects\CS\Command.cs(132,27,132,36): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
134>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\DividedSurfaceByIntersects\CS\Command.cs(45,7,45,15): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
134>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Massing\DividedSurfaceByIntersects\CS\Command.cs(149,49,149,56): error CS0246: The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)
136>------ Rebuild All started: Project: MultiplanarRebar, Configuration: Debug Any CPU ------
135>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
135>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
135>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
135>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateFillPattern\CS\Command.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
135>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateFillPattern\CS\Command.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
135>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateFillPattern\CS\Command.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
135>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateFillPattern\CS\FillPatternForm.cs(36,17,36,25): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
135>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateFillPattern\CS\FillPatternForm.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
135>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateFillPattern\CS\FillPatternForm.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
135>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateFillPattern\CS\FillPatternForm.cs(34,7,34,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
135>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateFillPattern\CS\Command.cs(42,28,42,44): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
135>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateFillPattern\CS\Command.cs(39,6,39,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
135>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateFillPattern\CS\Command.cs(40,6,40,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
135>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateFillPattern\CS\Command.cs(41,6,41,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
135>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateFillPattern\CS\Command.cs(39,44,39,52): error CS0103: The name 'Autodesk' does not exist in the current context
135>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateFillPattern\CS\Command.cs(40,45,40,53): error CS0103: The name 'Autodesk' does not exist in the current context
135>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateFillPattern\CS\Command.cs(41,43,41,51): error CS0103: The name 'Autodesk' does not exist in the current context
135>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateFillPattern\CS\Command.cs(60,39,60,58): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
135>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateFillPattern\CS\Command.cs(61,35,61,45): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
135>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateFillPattern\CS\Command.cs(60,24,60,30): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
135>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateFillPattern\CS\FillPatternForm.cs(124,15,124,33): error CS0246: The type or namespace name 'FillPatternElement' could not be found (are you missing a using directive or an assembly reference?)
135>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateFillPattern\CS\FillPatternForm.cs(148,15,148,33): error CS0246: The type or namespace name 'FillPatternElement' could not be found (are you missing a using directive or an assembly reference?)
135>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateFillPattern\CS\FillPatternForm.cs(192,35,192,37): error CS0246: The type or namespace name 'UV' could not be found (are you missing a using directive or an assembly reference?)
135>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateFillPattern\CS\FillPatternForm.cs(192,15,192,23): error CS0246: The type or namespace name 'FillGrid' could not be found (are you missing a using directive or an assembly reference?)
135>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateFillPattern\CS\FillPatternForm.cs(220,15,220,33): error CS0246: The type or namespace name 'LinePatternElement' could not be found (are you missing a using directive or an assembly reference?)
135>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateFillPattern\CS\FillPatternForm.cs(297,51,297,60): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
135>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateFillPattern\CS\FillPatternForm.cs(297,66,297,73): error CS0246: The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)
135>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateFillPattern\CS\FillPatternForm.cs(350,15,350,19): error CS0246: The type or namespace name 'Wall' could not be found (are you missing a using directive or an assembly reference?)
135>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateFillPattern\CS\FillPatternForm.cs(435,48,435,57): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
135>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateFillPattern\CS\FillPatternForm.cs(57,26,57,45): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
135>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateFillPattern\CS\FillPatternForm.cs(48,7,48,17): error CS0246: The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)
135>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateFillPattern\CS\FillPatternForm.cs(52,7,52,15): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
137>------ Rebuild All started: Project: ExtensibleStorageManager, Configuration: Debug Any CPU ------
136>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
136>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
136>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
136>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\CorbelFrame.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
136>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\CorbelFrame.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
136>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\GeometryUtil.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
136>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\GeometryUtil.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
136>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\Command.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
136>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\Command.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
136>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\Command.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
136>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\CorbelReinforcementOptions.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
136>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\CorbelReinforcementOptions.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
136>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\CorbelReinforcementOptionsForm.cs(9,7,9,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
136>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\CorbelReinforcementOptionsForm.cs(10,7,10,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
136>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\SharedParameterUtil.cs(24,7,24,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
136>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\SharedParameterUtil.cs(25,7,25,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
136>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\SharedParameterUtil.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
136>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\CorbelFrame.cs(51,16,51,20): error CS0246: The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)
136>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\CorbelFrame.cs(56,16,56,20): error CS0246: The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)
136>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\CorbelFrame.cs(61,16,61,20): error CS0246: The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)
136>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\CorbelFrame.cs(66,16,66,20): error CS0246: The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)
136>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\CorbelFrame.cs(88,26,88,34): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
136>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\CorbelFrame.cs(204,58,204,66): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
136>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\CorbelFrame.cs(204,16,204,26): error CS0246: The type or namespace name 'RebarShape' could not be found (are you missing a using directive or an assembly reference?)
136>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\CorbelFrame.cs(294,34,294,37): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
136>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\CorbelFrame.cs(294,50,294,53): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
136>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\CorbelFrame.cs(294,62,294,65): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
136>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\CorbelFrame.cs(75,26,75,30): error CS0246: The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)
136>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\CorbelFrame.cs(75,36,75,40): error CS0246: The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)
136>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\CorbelFrame.cs(75,51,75,55): error CS0246: The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)
136>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\CorbelFrame.cs(75,64,75,68): error CS0246: The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)
136>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\CorbelFrame.cs(366,41,366,55): error CS0246: The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)
136>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\CorbelFrame.cs(574,34,574,39): error CS0246: The type or namespace name 'Rebar' could not be found (are you missing a using directive or an assembly reference?)
136>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\CorbelFrame.cs(346,28,346,42): error CS0246: The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)
136>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\CorbelFrame.cs(347,17,347,21): error CS0246: The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)
136>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\CorbelFrame.cs(316,17,316,21): error CS0246: The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)
136>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\CorbelFrame.cs(321,17,321,31): error CS0246: The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)
136>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\GeometryUtil.cs(43,53,43,67): error CS0246: The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)
136>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\GeometryUtil.cs(146,11,146,14): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
136>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\GeometryUtil.cs(146,27,146,37): error CS0246: The type or namespace name 'PlanarFace' could not be found (are you missing a using directive or an assembly reference?)
136>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\GeometryUtil.cs(146,56,146,60): error CS0246: The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)
136>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\GeometryUtil.cs(147,15,147,25): error CS0246: The type or namespace name 'PlanarFace' could not be found (are you missing a using directive or an assembly reference?)
136>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\GeometryUtil.cs(147,45,147,49): error CS0246: The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)
136>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\GeometryUtil.cs(148,15,148,19): error CS0246: The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)
136>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\GeometryUtil.cs(148,34,148,38): error CS0246: The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)
136>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\GeometryUtil.cs(215,11,215,25): error CS0246: The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)
136>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\GeometryUtil.cs(216,11,216,15): error CS0246: The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)
136>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\GeometryUtil.cs(216,27,216,31): error CS0246: The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)
136>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\GeometryUtil.cs(216,42,216,46): error CS0246: The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)
136>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\GeometryUtil.cs(216,59,216,63): error CS0246: The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)
136>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\GeometryUtil.cs(216,75,216,79): error CS0246: The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)
136>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\GeometryUtil.cs(217,11,217,19): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
136>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\GeometryUtil.cs(217,30,217,40): error CS0246: The type or namespace name 'PlanarFace' could not be found (are you missing a using directive or an assembly reference?)
136>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\GeometryUtil.cs(272,42,272,46): error CS0246: The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)
136>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\GeometryUtil.cs(272,54,272,58): error CS0246: The type or namespace name 'Edge' could not be found (are you missing a using directive or an assembly reference?)
136>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\GeometryUtil.cs(272,22,272,25): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
136>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\GeometryUtil.cs(298,44,298,51): error CS0246: The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)
136>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\GeometryUtil.cs(298,22,298,27): error CS0246: The type or namespace name 'Solid' could not be found (are you missing a using directive or an assembly reference?)
136>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\GeometryUtil.cs(348,43,348,47): error CS0246: The type or namespace name 'Face' could not be found (are you missing a using directive or an assembly reference?)
136>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\GeometryUtil.cs(348,22,348,25): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
136>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\GeometryUtil.cs(362,41,362,51): error CS0246: The type or namespace name 'PlanarFace' could not be found (are you missing a using directive or an assembly reference?)
136>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\GeometryUtil.cs(362,59,362,69): error CS0246: The type or namespace name 'PlanarFace' could not be found (are you missing a using directive or an assembly reference?)
136>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\Command.cs(39,28,39,44): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
136>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\Command.cs(36,6,36,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
136>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\Command.cs(37,6,37,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
136>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\Command.cs(38,6,38,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
136>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\Command.cs(36,44,36,52): error CS0103: The name 'Autodesk' does not exist in the current context
136>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\Command.cs(37,45,37,53): error CS0103: The name 'Autodesk' does not exist in the current context
136>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\Command.cs(38,43,38,51): error CS0103: The name 'Autodesk' does not exist in the current context
136>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\Command.cs(58,49,58,68): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
136>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\Command.cs(59,33,59,41): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
136>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\Command.cs(58,16,58,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
136>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\Command.cs(155,23,155,37): error CS0246: The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)
136>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\CorbelReinforcementOptions.cs(41,16,41,24): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
136>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\CorbelReinforcementOptions.cs(46,21,46,33): error CS0246: The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)
136>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\CorbelReinforcementOptions.cs(51,16,51,28): error CS0246: The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)
136>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\CorbelReinforcementOptions.cs(56,16,56,28): error CS0246: The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)
136>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\SharedParameterUtil.cs(44,61,44,69): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
136>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\SharedParameterUtil.cs(44,23,44,32): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
136>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\CorbelReinforcementOptions.cs(61,16,61,28): error CS0246: The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)
136>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\CorbelReinforcementOptions.cs(66,16,66,28): error CS0246: The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)
136>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\SharedParameterUtil.cs(56,70,56,81): error CS0246: The type or namespace name 'Application' could not be found (are you missing a using directive or an assembly reference?)
136>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\SharedParameterUtil.cs(56,23,56,41): error CS0246: The type or namespace name 'ExternalDefinition' could not be found (are you missing a using directive or an assembly reference?)
136>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\SharedParameterUtil.cs(68,88,68,99): error CS0246: The type or namespace name 'Application' could not be found (are you missing a using directive or an assembly reference?)
136>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\SharedParameterUtil.cs(68,23,68,41): error CS0246: The type or namespace name 'ExternalDefinition' could not be found (are you missing a using directive or an assembly reference?)
136>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\CorbelReinforcementOptions.cs(82,43,82,51): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
136>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\SharedParameterUtil.cs(91,61,91,72): error CS0246: The type or namespace name 'Application' could not be found (are you missing a using directive or an assembly reference?)
136>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiplanarRebar\CS\SharedParameterUtil.cs(91,23,91,37): error CS0246: The type or namespace name 'DefinitionFile' could not be found (are you missing a using directive or an assembly reference?)
138>------ Rebuild All started: Project: AnalyticalSupportData_Info, Configuration: Debug Any CPU ------
138>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
138>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
138>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
138>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalyticalSupportData_Info\CS\AnalyticalSupportData_Info.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
138>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalyticalSupportData_Info\CS\AnalyticalSupportData_Info.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
138>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalyticalSupportData_Info\CS\AnalyticalSupportData_Info.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
138>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalyticalSupportData_Info\CS\AnalyticalSupportData_Info.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
138>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalyticalSupportData_Info\CS\AnalyticalSupportData_Info.cs(42,27,42,43): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
138>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalyticalSupportData_Info\CS\AnalyticalSupportData_Info.cs(39,6,39,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
138>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalyticalSupportData_Info\CS\AnalyticalSupportData_Info.cs(40,6,40,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
138>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalyticalSupportData_Info\CS\AnalyticalSupportData_Info.cs(41,6,41,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
138>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalyticalSupportData_Info\CS\AnalyticalSupportData_Info.cs(39,44,39,52): error CS0103: The name 'Autodesk' does not exist in the current context
138>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalyticalSupportData_Info\CS\AnalyticalSupportData_Info.cs(40,45,40,53): error CS0103: The name 'Autodesk' does not exist in the current context
138>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalyticalSupportData_Info\CS\AnalyticalSupportData_Info.cs(41,43,41,51): error CS0103: The name 'Autodesk' does not exist in the current context
138>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalyticalSupportData_Info\CS\AnalyticalSupportData_Info.cs(75,49,75,57): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
138>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalyticalSupportData_Info\CS\AnalyticalSupportData_Info.cs(77,63,77,73): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
138>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalyticalSupportData_Info\CS\AnalyticalSupportData_Info.cs(75,16,75,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
138>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalyticalSupportData_Info\CS\AnalyticalSupportData_Info.cs(107,55,107,65): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
138>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalyticalSupportData_Info\CS\AnalyticalSupportData_Info.cs(216,48,216,63): error CS0246: The type or namespace name 'AnalyticalModel' could not be found (are you missing a using directive or an assembly reference?)
138>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalyticalSupportData_Info\CS\AnalyticalSupportData_Info.cs(45,9,45,28): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
139>------ Rebuild All started: Project: EnergyAnalysisModel, Configuration: Debug Any CPU ------
139>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
139>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
139>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
139>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\EnergyAnalysisModel\CS\Command.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
139>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\EnergyAnalysisModel\CS\Command.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
139>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\EnergyAnalysisModel\CS\Command.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
139>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\EnergyAnalysisModel\CS\EnergyAnalysisModel.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
139>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\EnergyAnalysisModel\CS\EnergyAnalysisModel.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
139>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\EnergyAnalysisModel\CS\EnergyAnalysisModel.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
139>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\EnergyAnalysisModel\CS\EnergyAnalysisModel.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
139>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\EnergyAnalysisModel\CS\Command.cs(43,28,43,44): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
139>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\EnergyAnalysisModel\CS\EnergyAnalysisModel.cs(45,16,45,48): error CS0246: The type or namespace name 'EnergyAnalysisDetailModelOptions' could not be found (are you missing a using directive or an assembly reference?)
139>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\EnergyAnalysisModel\CS\Command.cs(40,6,40,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
139>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\EnergyAnalysisModel\CS\Command.cs(41,6,41,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
139>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\EnergyAnalysisModel\CS\Command.cs(42,6,42,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
139>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\EnergyAnalysisModel\CS\Command.cs(40,44,40,52): error CS0103: The name 'Autodesk' does not exist in the current context
139>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\EnergyAnalysisModel\CS\Command.cs(41,45,41,53): error CS0103: The name 'Autodesk' does not exist in the current context
139>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\EnergyAnalysisModel\CS\Command.cs(42,43,42,51): error CS0103: The name 'Autodesk' does not exist in the current context
139>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\EnergyAnalysisModel\CS\EnergyAnalysisModel.cs(157,62,157,83): error CS0246: The type or namespace name 'EnergyAnalysisSurface' could not be found (are you missing a using directive or an assembly reference?)
139>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\EnergyAnalysisModel\CS\Command.cs(62,49,62,68): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
139>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\EnergyAnalysisModel\CS\Command.cs(63,33,63,41): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
139>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\EnergyAnalysisModel\CS\Command.cs(62,16,62,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
139>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\EnergyAnalysisModel\CS\EnergyAnalysisModel.cs(61,36,61,44): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
139>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\EnergyAnalysisModel\CS\EnergyAnalysisModel.cs(38,17,38,42): error CS0246: The type or namespace name 'EnergyAnalysisDetailModel' could not be found (are you missing a using directive or an assembly reference?)
139>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\EnergyAnalysisModel\CS\EnergyAnalysisModel.cs(40,17,40,49): error CS0246: The type or namespace name 'EnergyAnalysisDetailModelOptions' could not be found (are you missing a using directive or an assembly reference?)
139>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\EnergyAnalysisModel\CS\EnergyAnalysisModel.cs(42,17,42,25): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
140>------ Rebuild All started: Project: PointCloudEngine, Configuration: Debug Any CPU ------
140>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
140>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
140>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\FileBasedPointCloud.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\FileBasedPointCloud.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudAccessBase.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudAccessBase.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudAccessBase.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudCellStorage.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudCellStorage.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudCellStorage.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudEngineSample.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudEngineSample.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudEngineSample.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PredefinedPointCloud.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PredefinedPointCloud.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PredefinedPointCloudEngine.cs(25,7,25,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PredefinedPointCloudEngine.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\XmlUtils.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\FileBasedPointCloud.cs(62,55,62,72): error CS0246: The type or namespace name 'IPointCloudAccess' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\FileBasedPointCloud.cs(111,16,111,39): error CS0246: The type or namespace name 'PointCloudColorEncoding' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\FileBasedPointCloud.cs(122,57,122,73): error CS0246: The type or namespace name 'PointCloudFilter' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\FileBasedPointCloud.cs(122,83,122,92): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\FileBasedPointCloud.cs(122,16,122,33): error CS0246: The type or namespace name 'IPointSetIterator' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\FileBasedPointCloud.cs(134,57,134,73): error CS0246: The type or namespace name 'PointCloudFilter' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\FileBasedPointCloud.cs(134,99,134,108): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\FileBasedPointCloud.cs(134,16,134,33): error CS0246: The type or namespace name 'IPointSetIterator' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\FileBasedPointCloud.cs(143,16,143,23): error CS0246: The type or namespace name 'Outline' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\FileBasedPointCloud.cs(153,16,153,19): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\FileBasedPointCloud.cs(175,31,175,47): error CS0246: The type or namespace name 'PointCloudFilter' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\FileBasedPointCloud.cs(175,57,175,66): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudAccessBase.cs(63,32,63,35): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudAccessBase.cs(63,47,63,50): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudAccessBase.cs(78,32,78,35): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudAccessBase.cs(78,47,78,50): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudAccessBase.cs(113,19,113,26): error CS0246: The type or namespace name 'Outline' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudAccessBase.cs(156,45,156,61): error CS0246: The type or namespace name 'PointCloudFilter' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudAccessBase.cs(44,17,44,24): error CS0246: The type or namespace name 'Outline' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudAccessBase.cs(275,56,275,73): error CS0246: The type or namespace name 'IPointSetIterator' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudAccessBase.cs(290,78,290,94): error CS0246: The type or namespace name 'PointCloudFilter' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudAccessBase.cs(278,21,278,37): error CS0246: The type or namespace name 'PointCloudFilter' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudCellStorage.cs(72,16,72,19): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudCellStorage.cs(80,16,80,19): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudCellStorage.cs(88,16,88,26): error CS0246: The type or namespace name 'CloudPoint' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudCellStorage.cs(140,29,140,32): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudCellStorage.cs(140,45,140,48): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudCellStorage.cs(154,39,154,42): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudCellStorage.cs(154,50,154,53): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudCellStorage.cs(167,32,167,35): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudCellStorage.cs(102,38,102,41): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudCellStorage.cs(102,53,102,56): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudCellStorage.cs(49,17,49,27): error CS0246: The type or namespace name 'CloudPoint' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudCellStorage.cs(51,17,51,20): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudCellStorage.cs(52,17,52,20): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudEngineSample.cs(38,45,38,65): error CS0246: The type or namespace name 'IExternalApplication' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudEngineSample.cs(37,5,37,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudEngineSample.cs(37,44,37,52): error CS0103: The name 'Autodesk' does not exist in the current context
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudEngineSample.cs(47,31,47,54): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudEngineSample.cs(47,14,47,20): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudEngineSample.cs(106,32,106,55): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudEngineSample.cs(106,14,106,20): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudEngineSample.cs(118,72,118,88): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudEngineSample.cs(117,5,117,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudEngineSample.cs(117,43,117,51): error CS0103: The name 'Autodesk' does not exist in the current context
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudEngineSample.cs(128,29,128,48): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudEngineSample.cs(128,82,128,92): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudEngineSample.cs(128,14,128,20): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudEngineSample.cs(144,72,144,88): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudEngineSample.cs(143,5,143,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudEngineSample.cs(143,43,143,51): error CS0103: The name 'Autodesk' does not exist in the current context
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudEngineSample.cs(154,29,154,48): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudEngineSample.cs(154,82,154,92): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudEngineSample.cs(154,14,154,20): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudEngineSample.cs(170,73,170,89): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudEngineSample.cs(169,5,169,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudEngineSample.cs(169,43,169,51): error CS0103: The name 'Autodesk' does not exist in the current context
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudEngineSample.cs(180,29,180,48): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudEngineSample.cs(180,82,180,92): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudEngineSample.cs(180,14,180,20): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudEngineSample.cs(205,31,205,39): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudEngineSample.cs(205,83,205,92): error CS0246: The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudEngineSample.cs(219,73,219,89): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudEngineSample.cs(218,5,218,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudEngineSample.cs(218,43,218,51): error CS0103: The name 'Autodesk' does not exist in the current context
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudEngineSample.cs(229,29,229,48): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudEngineSample.cs(229,82,229,92): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PointCloudEngineSample.cs(229,14,229,20): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PredefinedPointCloud.cs(38,63,38,80): error CS0246: The type or namespace name 'IPointCloudAccess' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PredefinedPointCloud.cs(105,16,105,39): error CS0246: The type or namespace name 'PointCloudColorEncoding' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PredefinedPointCloud.cs(116,57,116,73): error CS0246: The type or namespace name 'PointCloudFilter' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PredefinedPointCloud.cs(116,83,116,92): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PredefinedPointCloud.cs(116,16,116,33): error CS0246: The type or namespace name 'IPointSetIterator' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PredefinedPointCloud.cs(128,57,128,73): error CS0246: The type or namespace name 'PointCloudFilter' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PredefinedPointCloud.cs(128,99,128,108): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PredefinedPointCloud.cs(128,16,128,33): error CS0246: The type or namespace name 'IPointSetIterator' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PredefinedPointCloud.cs(137,16,137,23): error CS0246: The type or namespace name 'Outline' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PredefinedPointCloud.cs(147,16,147,19): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PredefinedPointCloud.cs(169,31,169,47): error CS0246: The type or namespace name 'PointCloudFilter' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PredefinedPointCloud.cs(169,57,169,66): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PredefinedPointCloudEngine.cs(54,42,54,59): error CS0246: The type or namespace name 'IPointCloudEngine' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\PredefinedPointCloudEngine.cs(78,16,78,33): error CS0246: The type or namespace name 'IPointCloudAccess' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\XmlUtils.cs(40,23,40,26): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
140>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PointCloudEngine\CS\XmlUtils.cs(95,44,95,47): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
141>------ Rebuild All started: Project: PerformanceAdviserControl, Configuration: Debug Any CPU ------
141>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
141>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
141>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
141>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PerformanceAdviserControl\CS\Application.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
141>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PerformanceAdviserControl\CS\Application.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
141>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PerformanceAdviserControl\CS\RuleInfo.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
141>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PerformanceAdviserControl\CS\RuleInfo.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
141>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PerformanceAdviserControl\CS\FlippedDoorCheck.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
141>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PerformanceAdviserControl\CS\TestDisplayDialog.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
141>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PerformanceAdviserControl\CS\UICommand.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
141>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PerformanceAdviserControl\CS\UICommand.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
141>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PerformanceAdviserControl\CS\UICommand.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
141>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PerformanceAdviserControl\CS\Application.cs(36,32,36,40): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
141>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PerformanceAdviserControl\CS\Application.cs(70,51,70,59): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
141>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PerformanceAdviserControl\CS\Application.cs(70,16,70,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
141>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PerformanceAdviserControl\CS\Application.cs(105,52,105,60): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
141>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PerformanceAdviserControl\CS\Application.cs(105,16,105,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
141>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PerformanceAdviserControl\CS\RuleInfo.cs(37,23,37,47): error CS0246: The type or namespace name 'PerformanceAdviserRuleId' could not be found (are you missing a using directive or an assembly reference?)
141>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PerformanceAdviserControl\CS\RuleInfo.cs(46,23,46,47): error CS0246: The type or namespace name 'PerformanceAdviserRuleId' could not be found (are you missing a using directive or an assembly reference?)
141>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PerformanceAdviserControl\CS\FlippedDoorCheck.cs(35,37,35,45): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
141>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PerformanceAdviserControl\CS\FlippedDoorCheck.cs(59,31,59,39): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
141>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PerformanceAdviserControl\CS\FlippedDoorCheck.cs(79,41,79,49): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
141>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PerformanceAdviserControl\CS\FlippedDoorCheck.cs(79,78,79,86): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
141>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PerformanceAdviserControl\CS\FlippedDoorCheck.cs(99,35,99,43): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
141>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PerformanceAdviserControl\CS\FlippedDoorCheck.cs(133,65,133,73): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
141>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PerformanceAdviserControl\CS\FlippedDoorCheck.cs(133,16,133,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
141>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PerformanceAdviserControl\CS\FlippedDoorCheck.cs(167,16,167,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
141>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PerformanceAdviserControl\CS\FlippedDoorCheck.cs(176,23,176,31): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
141>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PerformanceAdviserControl\CS\FlippedDoorCheck.cs(188,22,188,30): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
141>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PerformanceAdviserControl\CS\FlippedDoorCheck.cs(203,23,203,31): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
141>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PerformanceAdviserControl\CS\FlippedDoorCheck.cs(208,16,208,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
141>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PerformanceAdviserControl\CS\FlippedDoorCheck.cs(213,16,213,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
141>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PerformanceAdviserControl\CS\TestDisplayDialog.cs(42,32,42,50): error CS0246: The type or namespace name 'PerformanceAdviser' could not be found (are you missing a using directive or an assembly reference?)
141>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PerformanceAdviserControl\CS\TestDisplayDialog.cs(42,71,42,79): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
141>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PerformanceAdviserControl\CS\TestDisplayDialog.cs(140,15,140,23): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
141>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PerformanceAdviserControl\CS\TestDisplayDialog.cs(141,15,141,23): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
141>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PerformanceAdviserControl\CS\UICommand.cs(35,22,35,30): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
141>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PerformanceAdviserControl\CS\UICommand.cs(32,5,32,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
141>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PerformanceAdviserControl\CS\UICommand.cs(33,5,33,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
141>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PerformanceAdviserControl\CS\UICommand.cs(34,5,34,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
141>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PerformanceAdviserControl\CS\UICommand.cs(32,43,32,51): error CS0103: The name 'Autodesk' does not exist in the current context
141>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PerformanceAdviserControl\CS\UICommand.cs(33,44,33,52): error CS0103: The name 'Autodesk' does not exist in the current context
141>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PerformanceAdviserControl\CS\UICommand.cs(34,42,34,50): error CS0103: The name 'Autodesk' does not exist in the current context
141>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PerformanceAdviserControl\CS\UICommand.cs(57,29,57,48): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
141>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PerformanceAdviserControl\CS\UICommand.cs(57,82,57,90): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
141>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PerformanceAdviserControl\CS\UICommand.cs(57,14,57,20): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
142>------ Rebuild All started: Project: MultithreadedCalculation, Configuration: Debug Any CPU ------
142>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
142>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
142>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
142>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\MultithreadedCalculation\CS\MultithreadedCalculation.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
142>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\MultithreadedCalculation\CS\MultithreadedCalculation.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
142>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\MultithreadedCalculation\CS\MultithreadedCalculation.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
142>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\MultithreadedCalculation\CS\MultithreadedCalculation.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
142>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\MultithreadedCalculation\CS\MultithreadedCalculation.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
142>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\MultithreadedCalculation\CS\MultithreadedCalculation.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
142>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\MultithreadedCalculation\CS\MultithreadedCalculation.cs(43,45,43,61): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
142>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\MultithreadedCalculation\CS\MultithreadedCalculation.cs(41,6,41,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
142>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\MultithreadedCalculation\CS\MultithreadedCalculation.cs(42,6,42,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
142>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\MultithreadedCalculation\CS\MultithreadedCalculation.cs(41,44,41,52): error CS0103: The name 'Autodesk' does not exist in the current context
142>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\MultithreadedCalculation\CS\MultithreadedCalculation.cs(42,45,42,53): error CS0103: The name 'Autodesk' does not exist in the current context
142>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\MultithreadedCalculation\CS\MultithreadedCalculation.cs(53,49,53,68): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
142>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\MultithreadedCalculation\CS\MultithreadedCalculation.cs(53,102,53,112): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
142>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\MultithreadedCalculation\CS\MultithreadedCalculation.cs(53,16,53,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
142>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\MultithreadedCalculation\CS\MultithreadedCalculation.cs(107,73,107,80): error CS0246: The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)
142>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\MultithreadedCalculation\CS\MultithreadedCalculation.cs(136,54,136,61): error CS0246: The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)
142>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\MultithreadedCalculation\CS\MultithreadedCalculation.cs(136,71,136,74): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
142>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\MultithreadedCalculation\CS\MultithreadedCalculation.cs(136,24,136,28): error CS0246: The type or namespace name 'Face' could not be found (are you missing a using directive or an assembly reference?)
142>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\MultithreadedCalculation\CS\MultithreadedCalculation.cs(45,16,45,25): error CS0246: The type or namespace name 'UpdaterId' could not be found (are you missing a using directive or an assembly reference?)
142>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\MultithreadedCalculation\CS\MultithreadedCalculation.cs(50,16,50,25): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
142>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\MultithreadedCalculation\CS\MultithreadedCalculation.cs(51,16,51,25): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
142>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\MultithreadedCalculation\CS\MultithreadedCalculation.cs(211,44,211,52): error CS0246: The type or namespace name 'IUpdater' could not be found (are you missing a using directive or an assembly reference?)
142>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\MultithreadedCalculation\CS\MultithreadedCalculation.cs(223,33,223,44): error CS0246: The type or namespace name 'UpdaterData' could not be found (are you missing a using directive or an assembly reference?)
142>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\MultithreadedCalculation\CS\MultithreadedCalculation.cs(250,20,250,34): error CS0246: The type or namespace name 'ChangePriority' could not be found (are you missing a using directive or an assembly reference?)
142>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\MultithreadedCalculation\CS\MultithreadedCalculation.cs(251,20,251,29): error CS0246: The type or namespace name 'UpdaterId' could not be found (are you missing a using directive or an assembly reference?)
142>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\MultithreadedCalculation\CS\MultithreadedCalculation.cs(216,86,216,93): error CS0246: The type or namespace name 'AddInId' could not be found (are you missing a using directive or an assembly reference?)
142>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\MultithreadedCalculation\CS\MultithreadedCalculation.cs(299,58,299,73): error CS0246: The type or namespace name 'IdlingEventArgs' could not be found (are you missing a using directive or an assembly reference?)
142>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\MultithreadedCalculation\CS\MultithreadedCalculation.cs(386,19,386,21): error CS0246: The type or namespace name 'UV' could not be found (are you missing a using directive or an assembly reference?)
142>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\MultithreadedCalculation\CS\MultithreadedCalculation.cs(271,71,271,73): error CS0246: The type or namespace name 'UV' could not be found (are you missing a using directive or an assembly reference?)
142>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\MultithreadedCalculation\CS\MultithreadedCalculation.cs(271,80,271,82): error CS0246: The type or namespace name 'UV' could not be found (are you missing a using directive or an assembly reference?)
142>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\MultithreadedCalculation\CS\MultithreadedCalculation.cs(261,13,261,15): error CS0246: The type or namespace name 'UV' could not be found (are you missing a using directive or an assembly reference?)
142>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\MultithreadedCalculation\CS\MultithreadedCalculation.cs(262,13,262,15): error CS0246: The type or namespace name 'UV' could not be found (are you missing a using directive or an assembly reference?)
142>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\MultithreadedCalculation\CS\MultithreadedCalculation.cs(266,19,266,21): error CS0246: The type or namespace name 'UV' could not be found (are you missing a using directive or an assembly reference?)
142>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\MultithreadedCalculation\CS\MultithreadedCalculation.cs(268,19,268,21): error CS0246: The type or namespace name 'UV' could not be found (are you missing a using directive or an assembly reference?)
142>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\MultithreadedCalculation\CS\MultithreadedCalculation.cs(269,19,269,31): error CS0246: The type or namespace name 'ValueAtPoint' could not be found (are you missing a using directive or an assembly reference?)
142>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\MultithreadedCalculation\CS\MultithreadedCalculation.cs(411,32,411,34): error CS0246: The type or namespace name 'UV' could not be found (are you missing a using directive or an assembly reference?)
142>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AnalysisVisualizationFramework\MultithreadedCalculation\CS\MultithreadedCalculation.cs(409,20,409,22): error CS0246: The type or namespace name 'UV' could not be found (are you missing a using directive or an assembly reference?)
143>------ Rebuild All started: Project: SlaveSymbolGeometry, Configuration: Debug Any CPU ------
137>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
137>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
137>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
137>CSC : error CS0006: Metadata file 'Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageManager\SchemaWrapperTools\CS\bin\Debug\SchemaWrapperTools.dll' could not be found
144>------ Rebuild All started: Project: GeometryCreation_BooleanOperation, Configuration: Debug Any CPU ------
143>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
143>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
143>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
143>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\SlaveSymbolGeometry\CS\Command.cs(25,7,25,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
143>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\SlaveSymbolGeometry\CS\Command.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
143>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\SlaveSymbolGeometry\CS\SlaveSymbolGeometry.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
143>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\SlaveSymbolGeometry\CS\SlaveSymbolGeometry.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
143>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\SlaveSymbolGeometry\CS\Command.cs(38,28,38,44): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
143>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\SlaveSymbolGeometry\CS\Command.cs(35,6,35,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
143>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\SlaveSymbolGeometry\CS\Command.cs(36,6,36,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
143>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\SlaveSymbolGeometry\CS\Command.cs(37,6,37,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
143>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\SlaveSymbolGeometry\CS\Command.cs(35,44,35,52): error CS0103: The name 'Autodesk' does not exist in the current context
143>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\SlaveSymbolGeometry\CS\Command.cs(36,45,36,53): error CS0103: The name 'Autodesk' does not exist in the current context
143>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\SlaveSymbolGeometry\CS\Command.cs(37,43,37,51): error CS0103: The name 'Autodesk' does not exist in the current context
143>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\SlaveSymbolGeometry\CS\Command.cs(57,49,57,68): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
143>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\SlaveSymbolGeometry\CS\Command.cs(58,33,58,41): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
143>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\SlaveSymbolGeometry\CS\Command.cs(57,16,57,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
143>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\SlaveSymbolGeometry\CS\SlaveSymbolGeometry.cs(160,31,160,36): error CS0246: The type or namespace name 'Solid' could not be found (are you missing a using directive or an assembly reference?)
143>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\SlaveSymbolGeometry\CS\SlaveSymbolGeometry.cs(160,44,160,48): error CS0246: The type or namespace name 'View' could not be found (are you missing a using directive or an assembly reference?)
143>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\SlaveSymbolGeometry\CS\SlaveSymbolGeometry.cs(211,47,211,51): error CS0246: The type or namespace name 'Face' could not be found (are you missing a using directive or an assembly reference?)
143>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\SlaveSymbolGeometry\CS\SlaveSymbolGeometry.cs(211,68,211,70): error CS0246: The type or namespace name 'UV' could not be found (are you missing a using directive or an assembly reference?)
143>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\SlaveSymbolGeometry\CS\SlaveSymbolGeometry.cs(212,21,212,33): error CS0246: The type or namespace name 'ValueAtPoint' could not be found (are you missing a using directive or an assembly reference?)
143>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\SlaveSymbolGeometry\CS\SlaveSymbolGeometry.cs(53,34,53,42): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
143>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\SlaveSymbolGeometry\CS\SlaveSymbolGeometry.cs(37,15,37,23): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
143>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\SlaveSymbolGeometry\CS\SlaveSymbolGeometry.cs(42,15,42,22): error CS0246: The type or namespace name 'Options' could not be found (are you missing a using directive or an assembly reference?)
145>------ Rebuild All started: Project: ProximityDetection_WallJoinControl, Configuration: Debug Any CPU ------
144>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
144>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
144>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
144>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.CSharp.CurrentVersion.targets(134,9): warning MSB3884: Could not find rule set file "GeometryCreation_BooleanOperation.ruleset".
144>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\AnalysisVisualizationFramework .cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
144>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\AnalysisVisualizationFramework .cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
144>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\BooleanOperation.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
144>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\Command.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
144>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\Command.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
144>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\Command.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
144>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\GeometryCreation.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
144>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\AnalysisVisualizationFramework .cs(68,66,68,74): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
144>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\AnalysisVisualizationFramework .cs(82,32,82,37): error CS0246: The type or namespace name 'Solid' could not be found (are you missing a using directive or an assembly reference?)
144>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\AnalysisVisualizationFramework .cs(167,56,167,60): error CS0246: The type or namespace name 'Face' could not be found (are you missing a using directive or an assembly reference?)
144>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\AnalysisVisualizationFramework .cs(167,77,167,79): error CS0246: The type or namespace name 'UV' could not be found (are you missing a using directive or an assembly reference?)
144>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\AnalysisVisualizationFramework .cs(167,98,167,110): error CS0246: The type or namespace name 'ValueAtPoint' could not be found (are you missing a using directive or an assembly reference?)
144>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\AnalysisVisualizationFramework .cs(58,48,58,56): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
144>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\AnalysisVisualizationFramework .cs(42,17,42,25): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
144>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\BooleanOperation.cs(39,54,39,59): error CS0246: The type or namespace name 'Solid' could not be found (are you missing a using directive or an assembly reference?)
144>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\BooleanOperation.cs(39,68,39,73): error CS0246: The type or namespace name 'Solid' could not be found (are you missing a using directive or an assembly reference?)
144>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\BooleanOperation.cs(39,21,39,26): error CS0246: The type or namespace name 'Solid' could not be found (are you missing a using directive or an assembly reference?)
144>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\BooleanOperation.cs(71,57,71,62): error CS0246: The type or namespace name 'Solid' could not be found (are you missing a using directive or an assembly reference?)
144>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\BooleanOperation.cs(71,71,71,76): error CS0246: The type or namespace name 'Solid' could not be found (are you missing a using directive or an assembly reference?)
144>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\BooleanOperation.cs(50,50,50,55): error CS0246: The type or namespace name 'Solid' could not be found (are you missing a using directive or an assembly reference?)
144>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\BooleanOperation.cs(50,64,50,69): error CS0246: The type or namespace name 'Solid' could not be found (are you missing a using directive or an assembly reference?)
144>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\BooleanOperation.cs(50,21,50,26): error CS0246: The type or namespace name 'Solid' could not be found (are you missing a using directive or an assembly reference?)
144>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\BooleanOperation.cs(81,53,81,58): error CS0246: The type or namespace name 'Solid' could not be found (are you missing a using directive or an assembly reference?)
144>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\BooleanOperation.cs(81,67,81,72): error CS0246: The type or namespace name 'Solid' could not be found (are you missing a using directive or an assembly reference?)
144>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\BooleanOperation.cs(61,55,61,60): error CS0246: The type or namespace name 'Solid' could not be found (are you missing a using directive or an assembly reference?)
144>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\BooleanOperation.cs(61,69,61,74): error CS0246: The type or namespace name 'Solid' could not be found (are you missing a using directive or an assembly reference?)
144>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\BooleanOperation.cs(61,21,61,26): error CS0246: The type or namespace name 'Solid' could not be found (are you missing a using directive or an assembly reference?)
144>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\BooleanOperation.cs(91,58,91,63): error CS0246: The type or namespace name 'Solid' could not be found (are you missing a using directive or an assembly reference?)
144>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\BooleanOperation.cs(91,72,91,77): error CS0246: The type or namespace name 'Solid' could not be found (are you missing a using directive or an assembly reference?)
144>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\Command.cs(41,28,41,44): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
144>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\Command.cs(39,6,39,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
144>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\Command.cs(40,6,40,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
144>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\Command.cs(39,44,39,52): error CS0103: The name 'Autodesk' does not exist in the current context
144>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\Command.cs(40,43,40,51): error CS0103: The name 'Autodesk' does not exist in the current context
144>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\Command.cs(59,39,59,58): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
144>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\Command.cs(60,35,60,45): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
144>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\Command.cs(59,24,59,30): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
144>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\Command.cs(103,22,103,27): error CS0246: The type or namespace name 'Solid' could not be found (are you missing a using directive or an assembly reference?)
144>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\GeometryCreation.cs(67,50,67,58): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
144>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\GeometryCreation.cs(83,42,83,51): error CS0246: The type or namespace name 'CurveLoop' could not be found (are you missing a using directive or an assembly reference?)
144>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\GeometryCreation.cs(83,67,83,70): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
144>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\GeometryCreation.cs(83,15,83,20): error CS0246: The type or namespace name 'Solid' could not be found (are you missing a using directive or an assembly reference?)
144>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\GeometryCreation.cs(96,36,96,44): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
144>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\GeometryCreation.cs(96,82,96,91): error CS0246: The type or namespace name 'CurveLoop' could not be found (are you missing a using directive or an assembly reference?)
144>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\GeometryCreation.cs(96,15,96,20): error CS0246: The type or namespace name 'Solid' could not be found (are you missing a using directive or an assembly reference?)
144>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\GeometryCreation.cs(109,33,109,42): error CS0246: The type or namespace name 'CurveLoop' could not be found (are you missing a using directive or an assembly reference?)
144>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\GeometryCreation.cs(109,113,109,122): error CS0246: The type or namespace name 'CurveLoop' could not be found (are you missing a using directive or an assembly reference?)
144>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\GeometryCreation.cs(109,15,109,20): error CS0246: The type or namespace name 'Solid' could not be found (are you missing a using directive or an assembly reference?)
144>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\GeometryCreation.cs(121,33,121,42): error CS0246: The type or namespace name 'CurveLoop' could not be found (are you missing a using directive or an assembly reference?)
144>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\GeometryCreation.cs(121,54,121,63): error CS0246: The type or namespace name 'CurveLoop' could not be found (are you missing a using directive or an assembly reference?)
144>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\GeometryCreation.cs(121,81,121,91): error CS0246: The type or namespace name 'VertexPair' could not be found (are you missing a using directive or an assembly reference?)
144>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\GeometryCreation.cs(121,15,121,20): error CS0246: The type or namespace name 'Solid' could not be found (are you missing a using directive or an assembly reference?)
144>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\GeometryCreation.cs(134,38,134,43): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
144>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\GeometryCreation.cs(134,85,134,94): error CS0246: The type or namespace name 'CurveLoop' could not be found (are you missing a using directive or an assembly reference?)
144>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\GeometryCreation.cs(134,127,134,137): error CS0246: The type or namespace name 'VertexPair' could not be found (are you missing a using directive or an assembly reference?)
144>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\GeometryCreation.cs(134,15,134,20): error CS0246: The type or namespace name 'Solid' could not be found (are you missing a using directive or an assembly reference?)
144>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\GeometryCreation.cs(145,41,145,44): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
144>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\GeometryCreation.cs(145,14,145,19): error CS0246: The type or namespace name 'Solid' could not be found (are you missing a using directive or an assembly reference?)
144>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\GeometryCreation.cs(178,44,178,47): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
144>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\GeometryCreation.cs(178,14,178,19): error CS0246: The type or namespace name 'Solid' could not be found (are you missing a using directive or an assembly reference?)
144>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\GeometryCreation.cs(208,46,208,49): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
144>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\GeometryCreation.cs(208,14,208,19): error CS0246: The type or namespace name 'Solid' could not be found (are you missing a using directive or an assembly reference?)
144>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\GeometryCreation.cs(57,32,57,40): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
144>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\GeometryCreation_BooleanOperation\CS\GeometryCreation.cs(41,15,41,23): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
146>------ Rebuild All started: Project: RevitAddInUtilitySample, Configuration: Debug Any CPU ------
145>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
145>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
145>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
145>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.CSharp.CurrentVersion.targets(134,9): warning MSB3884: Could not find rule set file "ProximityDetection_WallJoinControl.ruleset".
145>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\ProximityDetection_WallJoinControl\CS\Command.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
145>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\ProximityDetection_WallJoinControl\CS\Command.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
145>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\ProximityDetection_WallJoinControl\CS\Command.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
145>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\ProximityDetection_WallJoinControl\CS\ProximityDetection.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
145>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\ProximityDetection_WallJoinControl\CS\ProximityDetection.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
145>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\ProximityDetection_WallJoinControl\CS\ProximityDetectionAndWallJoinControlForm.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
145>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\ProximityDetection_WallJoinControl\CS\ProximityDetectionAndWallJoinControlForm.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
145>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\ProximityDetection_WallJoinControl\CS\WallJoinControl.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
145>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\ProximityDetection_WallJoinControl\CS\WallJoinControl.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
145>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\ProximityDetection_WallJoinControl\CS\Command.cs(40,28,40,44): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
145>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\ProximityDetection_WallJoinControl\CS\Command.cs(39,6,39,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
145>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\ProximityDetection_WallJoinControl\CS\Command.cs(39,44,39,52): error CS0103: The name 'Autodesk' does not exist in the current context
145>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\ProximityDetection_WallJoinControl\CS\Command.cs(58,39,58,58): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
145>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\ProximityDetection_WallJoinControl\CS\Command.cs(59,35,59,45): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
145>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\ProximityDetection_WallJoinControl\CS\Command.cs(58,24,58,30): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
145>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\ProximityDetection_WallJoinControl\CS\ProximityDetectionAndWallJoinControlForm.cs(133,27,133,31): error CS0246: The type or namespace name 'Wall' could not be found (are you missing a using directive or an assembly reference?)
145>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\ProximityDetection_WallJoinControl\CS\ProximityDetectionAndWallJoinControlForm.cs(145,27,145,34): error CS0246: The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)
145>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\ProximityDetection_WallJoinControl\CS\ProximityDetection.cs(72,10,72,18): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
145>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\ProximityDetection_WallJoinControl\CS\ProximityDetection.cs(73,10,73,18): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
145>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\ProximityDetection_WallJoinControl\CS\ProximityDetection.cs(87,53,87,57): error CS0246: The type or namespace name 'Wall' could not be found (are you missing a using directive or an assembly reference?)
145>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\ProximityDetection_WallJoinControl\CS\ProximityDetection.cs(138,56,138,63): error CS0246: The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)
145>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\ProximityDetection_WallJoinControl\CS\ProximityDetection.cs(217,51,217,55): error CS0246: The type or namespace name 'Wall' could not be found (are you missing a using directive or an assembly reference?)
145>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\ProximityDetection_WallJoinControl\CS\ProximityDetection.cs(300,58,300,61): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
145>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\ProximityDetection_WallJoinControl\CS\ProximityDetection.cs(300,15,300,39): error CS0246: The type or namespace name 'FilteredElementCollector' could not be found (are you missing a using directive or an assembly reference?)
145>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\ProximityDetection_WallJoinControl\CS\ProximityDetection.cs(58,10,58,18): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
145>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\ProximityDetection_WallJoinControl\CS\ProximityDetection.cs(59,10,59,18): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
145>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\ProximityDetection_WallJoinControl\CS\ProximityDetectionAndWallJoinControlForm.cs(61,55,61,63): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
145>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\ProximityDetection_WallJoinControl\CS\ProximityDetection.cs(46,15,46,23): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
145>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\ProximityDetection_WallJoinControl\CS\ProximityDetectionAndWallJoinControlForm.cs(45,15,45,23): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
145>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\ProximityDetection_WallJoinControl\CS\ProximityDetection.cs(50,15,50,23): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
145>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\ProximityDetection_WallJoinControl\CS\WallJoinControl.cs(72,10,72,18): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
145>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\ProximityDetection_WallJoinControl\CS\WallJoinControl.cs(73,10,73,18): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
145>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\ProximityDetection_WallJoinControl\CS\WallJoinControl.cs(87,52,87,56): error CS0246: The type or namespace name 'Wall' could not be found (are you missing a using directive or an assembly reference?)
145>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\ProximityDetection_WallJoinControl\CS\WallJoinControl.cs(137,37,137,41): error CS0246: The type or namespace name 'Wall' could not be found (are you missing a using directive or an assembly reference?)
145>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\ProximityDetection_WallJoinControl\CS\WallJoinControl.cs(137,48,137,61): error CS0246: The type or namespace name 'LocationCurve' could not be found (are you missing a using directive or an assembly reference?)
145>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\ProximityDetection_WallJoinControl\CS\WallJoinControl.cs(170,33,170,37): error CS0246: The type or namespace name 'Wall' could not be found (are you missing a using directive or an assembly reference?)
145>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\ProximityDetection_WallJoinControl\CS\WallJoinControl.cs(170,44,170,57): error CS0246: The type or namespace name 'LocationCurve' could not be found (are you missing a using directive or an assembly reference?)
145>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\ProximityDetection_WallJoinControl\CS\WallJoinControl.cs(188,40,188,53): error CS0246: The type or namespace name 'LocationCurve' could not be found (are you missing a using directive or an assembly reference?)
145>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\ProximityDetection_WallJoinControl\CS\WallJoinControl.cs(207,50,207,54): error CS0246: The type or namespace name 'Wall' could not be found (are you missing a using directive or an assembly reference?)
145>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\ProximityDetection_WallJoinControl\CS\WallJoinControl.cs(219,39,219,52): error CS0246: The type or namespace name 'LocationCurve' could not be found (are you missing a using directive or an assembly reference?)
145>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\ProximityDetection_WallJoinControl\CS\WallJoinControl.cs(58,10,58,18): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
145>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\ProximityDetection_WallJoinControl\CS\WallJoinControl.cs(59,10,59,18): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
145>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\ProximityDetection_WallJoinControl\CS\WallJoinControl.cs(46,15,46,23): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
145>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\ProximityDetection_WallJoinControl\CS\WallJoinControl.cs(50,15,50,23): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
147>------ Rebuild All started: Project: ExternalCommandRegistration, Configuration: Debug Any CPU ------
147>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
147>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
147>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
147>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalCommand\CS\ExternalCommandRegistration\AvailabilityClass.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
147>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalCommand\CS\ExternalCommandRegistration\ExternalCommandClass.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
147>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalCommand\CS\ExternalCommandRegistration\ExternalCommandClass.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
147>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalCommand\CS\ExternalCommandRegistration\AvailabilityClass.cs(36,26,36,54): error CS0246: The type or namespace name 'IExternalCommandAvailability' could not be found (are you missing a using directive or an assembly reference?)
147>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalCommand\CS\ExternalCommandRegistration\AvailabilityClass.cs(40,38,40,51): error CS0246: The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)
147>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalCommand\CS\ExternalCommandRegistration\AvailabilityClass.cs(41,10,41,18): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
147>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalCommand\CS\ExternalCommandRegistration\AvailabilityClass.cs(65,19,65,47): error CS0246: The type or namespace name 'IExternalCommandAvailability' could not be found (are you missing a using directive or an assembly reference?)
147>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalCommand\CS\ExternalCommandRegistration\AvailabilityClass.cs(69,38,69,51): error CS0246: The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)
147>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalCommand\CS\ExternalCommandRegistration\AvailabilityClass.cs(70,10,70,18): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
147>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalCommand\CS\ExternalCommandRegistration\ExternalCommandClass.cs(38,46,38,62): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
147>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalCommand\CS\ExternalCommandRegistration\ExternalCommandClass.cs(35,6,35,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
147>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalCommand\CS\ExternalCommandRegistration\ExternalCommandClass.cs(36,6,36,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
147>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalCommand\CS\ExternalCommandRegistration\ExternalCommandClass.cs(37,6,37,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
147>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalCommand\CS\ExternalCommandRegistration\ExternalCommandClass.cs(35,44,35,52): error CS0103: The name 'Autodesk' does not exist in the current context
147>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalCommand\CS\ExternalCommandRegistration\ExternalCommandClass.cs(36,45,36,53): error CS0103: The name 'Autodesk' does not exist in the current context
147>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalCommand\CS\ExternalCommandRegistration\ExternalCommandClass.cs(37,43,37,51): error CS0103: The name 'Autodesk' does not exist in the current context
147>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalCommand\CS\ExternalCommandRegistration\ExternalCommandClass.cs(42,31,42,50): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
147>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalCommand\CS\ExternalCommandRegistration\ExternalCommandClass.cs(43,32,43,40): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
147>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalCommand\CS\ExternalCommandRegistration\ExternalCommandClass.cs(42,16,42,22): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
147>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalCommand\CS\ExternalCommandRegistration\ExternalCommandClass.cs(79,42,79,58): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
147>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalCommand\CS\ExternalCommandRegistration\ExternalCommandClass.cs(77,6,77,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
147>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalCommand\CS\ExternalCommandRegistration\ExternalCommandClass.cs(78,6,78,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
147>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalCommand\CS\ExternalCommandRegistration\ExternalCommandClass.cs(77,44,77,52): error CS0103: The name 'Autodesk' does not exist in the current context
147>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalCommand\CS\ExternalCommandRegistration\ExternalCommandClass.cs(78,45,78,53): error CS0103: The name 'Autodesk' does not exist in the current context
147>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalCommand\CS\ExternalCommandRegistration\ExternalCommandClass.cs(83,31,83,50): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
147>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalCommand\CS\ExternalCommandRegistration\ExternalCommandClass.cs(84,32,84,40): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
147>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalCommand\CS\ExternalCommandRegistration\ExternalCommandClass.cs(83,16,83,22): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
147>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalCommand\CS\ExternalCommandRegistration\ExternalCommandClass.cs(99,45,99,65): error CS0246: The type or namespace name 'IExternalApplication' could not be found (are you missing a using directive or an assembly reference?)
147>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalCommand\CS\ExternalCommandRegistration\ExternalCommandClass.cs(98,6,98,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
147>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalCommand\CS\ExternalCommandRegistration\ExternalCommandClass.cs(98,45,98,53): error CS0103: The name 'Autodesk' does not exist in the current context
147>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalCommand\CS\ExternalCommandRegistration\ExternalCommandClass.cs(103,33,103,56): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
147>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalCommand\CS\ExternalCommandRegistration\ExternalCommandClass.cs(103,16,103,22): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
147>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalCommand\CS\ExternalCommandRegistration\ExternalCommandClass.cs(109,34,109,57): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
147>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalCommand\CS\ExternalCommandRegistration\ExternalCommandClass.cs(109,16,109,22): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
148>------ Rebuild All started: Project: WorkThread, Configuration: Debug Any CPU ------
146>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
146>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
146>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
146>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalCommand\CS\RevitAddInUtilitySample\RevitAddInUtilityForm.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
149>------ Rebuild All started: Project: ModelessForm_ExternalEvent, Configuration: Debug Any CPU ------
148>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
148>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
148>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
148>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\Application.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
148>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\Application.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
148>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\Application.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
148>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\Application.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
148>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\Application.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
148>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\Application.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
148>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\Application.cs(34,7,34,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
148>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\Application.cs(35,7,35,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
148>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\Command.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
148>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\Command.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
148>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\Command.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
148>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\Command.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
148>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\FaceAnalyzer.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
148>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\FaceAnalyzer.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
148>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\FaceAnalyzer.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
148>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\SharedResults.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
148>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\SharedResults.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
148>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\ThreadAgent.cs(24,7,24,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
148>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\Application.cs(42,32,42,52): error CS0246: The type or namespace name 'IExternalApplication' could not be found (are you missing a using directive or an assembly reference?)
148>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\Application.cs(60,34,60,57): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
148>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\Application.cs(60,16,60,22): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
148>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\Application.cs(83,33,83,56): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
148>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\Application.cs(83,16,83,22): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
148>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\Application.cs(100,33,100,46): error CS0246: The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)
148>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\Application.cs(136,40,136,53): error CS0246: The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)
148>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\Application.cs(150,44,150,57): error CS0246: The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)
148>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\Application.cs(167,41,167,54): error CS0246: The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)
148>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\Application.cs(181,45,181,58): error CS0246: The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)
148>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\Application.cs(204,50,204,65): error CS0246: The type or namespace name 'IdlingEventArgs' could not be found (are you missing a using directive or an assembly reference?)
148>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\Application.cs(247,54,247,78): error CS0246: The type or namespace name 'DocumentChangedEventArgs' could not be found (are you missing a using directive or an assembly reference?)
148>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\Application.cs(290,40,290,48): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
148>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\Application.cs(50,30,50,45): error CS0246: The type or namespace name 'IdlingEventArgs' could not be found (are you missing a using directive or an assembly reference?)
148>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\Application.cs(52,30,52,54): error CS0246: The type or namespace name 'DocumentChangedEventArgs' could not be found (are you missing a using directive or an assembly reference?)
148>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\Command.cs(41,28,41,44): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
148>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\Command.cs(39,6,39,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
148>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\Command.cs(40,6,40,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
148>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\Command.cs(39,44,39,52): error CS0103: The name 'Autodesk' does not exist in the current context
148>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\Command.cs(40,45,40,53): error CS0103: The name 'Autodesk' does not exist in the current context
148>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\Command.cs(59,39,59,58): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
148>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\Command.cs(60,35,60,45): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
148>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\Command.cs(59,24,59,30): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
148>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\Command.cs(104,37,104,47): error CS0246: The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)
148>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\Command.cs(104,17,104,23): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
148>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\FaceAnalyzer.cs(90,17,90,26): error CS0246: The type or namespace name 'Reference' could not be found (are you missing a using directive or an assembly reference?)
148>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\FaceAnalyzer.cs(107,17,107,21): error CS0246: The type or namespace name 'Face' could not be found (are you missing a using directive or an assembly reference?)
148>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\FaceAnalyzer.cs(162,16,162,25): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
148>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\FaceAnalyzer.cs(80,29,80,33): error CS0246: The type or namespace name 'View' could not be found (are you missing a using directive or an assembly reference?)
148>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\FaceAnalyzer.cs(58,17,58,21): error CS0246: The type or namespace name 'View' could not be found (are you missing a using directive or an assembly reference?)
148>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\FaceAnalyzer.cs(62,17,62,36): error CS0246: The type or namespace name 'SpatialFieldManager' could not be found (are you missing a using directive or an assembly reference?)
148>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\SharedResults.cs(82,42,82,44): error CS0246: The type or namespace name 'UV' could not be found (are you missing a using directive or an assembly reference?)
148>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\SharedResults.cs(82,64,82,76): error CS0246: The type or namespace name 'ValueAtPoint' could not be found (are you missing a using directive or an assembly reference?)
148>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\SharedResults.cs(115,31,115,33): error CS0246: The type or namespace name 'UV' could not be found (are you missing a using directive or an assembly reference?)
148>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\SharedResults.cs(42,23,42,35): error CS0246: The type or namespace name 'ValueAtPoint' could not be found (are you missing a using directive or an assembly reference?)
148>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\SharedResults.cs(44,23,44,25): error CS0246: The type or namespace name 'UV' could not be found (are you missing a using directive or an assembly reference?)
148>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\ThreadAgent.cs(56,28,56,41): error CS0246: The type or namespace name 'BoundingBoxUV' could not be found (are you missing a using directive or an assembly reference?)
148>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\MultiThreading\WorkThread\CS\ThreadAgent.cs(45,17,45,30): error CS0246: The type or namespace name 'BoundingBoxUV' could not be found (are you missing a using directive or an assembly reference?)
150>------ Rebuild All started: Project: ModelessForm_IdlingEvent, Configuration: Debug Any CPU ------
149>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
149>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
149>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
149>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_ExternalEvent\CS\Application.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
149>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_ExternalEvent\CS\Application.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
149>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_ExternalEvent\CS\Application.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
149>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_ExternalEvent\CS\Application.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
149>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_ExternalEvent\CS\Application.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
149>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_ExternalEvent\CS\Command.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
149>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_ExternalEvent\CS\Command.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
149>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_ExternalEvent\CS\Command.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
149>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_ExternalEvent\CS\ModelessForm.cs(24,7,24,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
149>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_ExternalEvent\CS\RequestHandler.cs(25,7,25,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
149>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_ExternalEvent\CS\RequestHandler.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
149>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_ExternalEvent\CS\Application.cs(40,32,40,52): error CS0246: The type or namespace name 'IExternalApplication' could not be found (are you missing a using directive or an assembly reference?)
149>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_ExternalEvent\CS\Application.cs(53,34,53,57): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
149>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_ExternalEvent\CS\Application.cs(53,16,53,22): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
149>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_ExternalEvent\CS\Application.cs(68,33,68,56): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
149>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_ExternalEvent\CS\Application.cs(68,16,68,22): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
149>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_ExternalEvent\CS\Application.cs(83,30,83,43): error CS0246: The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)
149>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_ExternalEvent\CS\Command.cs(40,28,40,44): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
149>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_ExternalEvent\CS\Command.cs(38,6,38,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
149>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_ExternalEvent\CS\Command.cs(39,6,39,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
149>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_ExternalEvent\CS\Command.cs(38,44,38,52): error CS0103: The name 'Autodesk' does not exist in the current context
149>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_ExternalEvent\CS\Command.cs(39,45,39,53): error CS0103: The name 'Autodesk' does not exist in the current context
149>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_ExternalEvent\CS\Command.cs(58,39,58,58): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
149>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_ExternalEvent\CS\Command.cs(59,35,59,45): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
149>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_ExternalEvent\CS\Command.cs(58,24,58,30): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
149>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_ExternalEvent\CS\ModelessForm.cs(52,27,52,40): error CS0246: The type or namespace name 'ExternalEvent' could not be found (are you missing a using directive or an assembly reference?)
149>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_ExternalEvent\CS\ModelessForm.cs(45,15,45,28): error CS0246: The type or namespace name 'ExternalEvent' could not be found (are you missing a using directive or an assembly reference?)
149>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_ExternalEvent\CS\RequestHandler.cs(34,35,34,56): error CS0246: The type or namespace name 'IExternalEventHandler' could not be found (are you missing a using directive or an assembly reference?)
149>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_ExternalEvent\CS\RequestHandler.cs(69,29,69,42): error CS0246: The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)
149>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_ExternalEvent\CS\RequestHandler.cs(147,42,147,55): error CS0246: The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)
149>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_ExternalEvent\CS\RequestHandler.cs(193,38,193,52): error CS0246: The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)
149>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_ExternalEvent\CS\RequestHandler.cs(203,38,203,52): error CS0246: The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)
149>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_ExternalEvent\CS\RequestHandler.cs(208,32,208,46): error CS0246: The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)
149>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_ExternalEvent\CS\RequestHandler.cs(220,29,220,43): error CS0246: The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)
149>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_ExternalEvent\CS\RequestHandler.cs(225,30,225,44): error CS0246: The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)
149>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_ExternalEvent\CS\RequestHandler.cs(37,45,37,59): error CS0246: The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)
151>------ Rebuild All started: Project: ProgressNotifier, Configuration: Debug Any CPU ------
150>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
150>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
150>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
150>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_IdlingEvent\CS\Application.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
150>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_IdlingEvent\CS\Application.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
150>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_IdlingEvent\CS\Application.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
150>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_IdlingEvent\CS\Application.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
150>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_IdlingEvent\CS\Application.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
150>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_IdlingEvent\CS\Application.cs(34,7,34,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
150>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_IdlingEvent\CS\Command.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
150>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_IdlingEvent\CS\Command.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
150>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_IdlingEvent\CS\Command.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
150>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_IdlingEvent\CS\RequestHandler.cs(25,7,25,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
150>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_IdlingEvent\CS\RequestHandler.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
150>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_IdlingEvent\CS\Application.cs(41,32,41,52): error CS0246: The type or namespace name 'IExternalApplication' could not be found (are you missing a using directive or an assembly reference?)
150>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_IdlingEvent\CS\Application.cs(54,34,54,57): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
150>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_IdlingEvent\CS\Application.cs(54,16,54,22): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
150>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_IdlingEvent\CS\Application.cs(73,33,73,56): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
150>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_IdlingEvent\CS\Application.cs(73,16,73,22): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
150>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_IdlingEvent\CS\Application.cs(88,30,88,43): error CS0246: The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)
150>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_IdlingEvent\CS\Application.cs(112,50,112,65): error CS0246: The type or namespace name 'IdlingEventArgs' could not be found (are you missing a using directive or an assembly reference?)
150>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_IdlingEvent\CS\Command.cs(40,28,40,44): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
150>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_IdlingEvent\CS\Command.cs(38,6,38,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
150>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_IdlingEvent\CS\Command.cs(39,6,39,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
150>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_IdlingEvent\CS\Command.cs(38,44,38,52): error CS0103: The name 'Autodesk' does not exist in the current context
150>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_IdlingEvent\CS\Command.cs(39,45,39,53): error CS0103: The name 'Autodesk' does not exist in the current context
150>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_IdlingEvent\CS\Command.cs(58,39,58,58): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
150>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_IdlingEvent\CS\Command.cs(59,35,59,45): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
150>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_IdlingEvent\CS\Command.cs(58,24,58,30): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
150>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_IdlingEvent\CS\RequestHandler.cs(44,36,44,49): error CS0246: The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)
150>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_IdlingEvent\CS\RequestHandler.cs(115,49,115,62): error CS0246: The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)
150>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_IdlingEvent\CS\RequestHandler.cs(161,45,161,59): error CS0246: The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)
150>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_IdlingEvent\CS\RequestHandler.cs(171,38,171,52): error CS0246: The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)
150>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_IdlingEvent\CS\RequestHandler.cs(176,39,176,53): error CS0246: The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)
150>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_IdlingEvent\CS\RequestHandler.cs(188,36,188,50): error CS0246: The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)
150>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_IdlingEvent\CS\RequestHandler.cs(193,37,193,51): error CS0246: The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)
150>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ModelessDialog\ModelessForm_IdlingEvent\CS\RequestHandler.cs(37,45,37,59): error CS0246: The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)
152>------ Rebuild All started: Project: RoutingPreferenceTools, Configuration: Debug Any CPU ------
151>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
151>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
151>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
151>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\ProgressNotifier\CS\Command.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
151>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\ProgressNotifier\CS\Command.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
151>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\ProgressNotifier\CS\ProgressItem.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
151>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\ProgressNotifier\CS\ProgressItem.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
151>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\ProgressNotifier\CS\ProgressItem.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
151>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\ProgressNotifier\CS\ProgressStack.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
151>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\ProgressNotifier\CS\ProgressStack.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
151>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\ProgressNotifier\CS\ProgressStack.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
151>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\ProgressNotifier\CS\Command.cs(40,21,40,37): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
151>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\ProgressNotifier\CS\Command.cs(39,6,39,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
151>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\ProgressNotifier\CS\Command.cs(39,44,39,52): error CS0103: The name 'Autodesk' does not exist in the current context
151>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\ProgressNotifier\CS\Command.cs(58,31,58,50): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
151>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\ProgressNotifier\CS\Command.cs(58,84,58,94): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
151>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\ProgressNotifier\CS\Command.cs(58,16,58,22): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
151>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\ProgressNotifier\CS\MainWindow.xaml.cs(61,53,61,61): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
151>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\ProgressNotifier\CS\MainWindow.xaml.cs(66,54,66,62): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
151>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\ProgressNotifier\CS\MainWindow.xaml.cs(48,27,48,35): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
151>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\ProgressNotifier\CS\MainWindow.xaml.cs(180,9,180,17): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
151>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\ProgressNotifier\CS\ProgressItem.cs(167,16,167,29): error CS0246: The type or namespace name 'ProgressStage' could not be found (are you missing a using directive or an assembly reference?)
151>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\ProgressNotifier\CS\ProgressItem.cs(76,78,76,91): error CS0246: The type or namespace name 'ProgressStage' could not be found (are you missing a using directive or an assembly reference?)
151>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\ProgressNotifier\CS\ProgressItem.cs(66,9,66,22): error CS0246: The type or namespace name 'ProgressStage' could not be found (are you missing a using directive or an assembly reference?)
151>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Events\ProgressNotifier\CS\ProgressStack.cs(60,42,60,50): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
153>------ Rebuild All started: Project: StairsAutomation, Configuration: Debug Any CPU ------
153>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
153>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
153>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\Command.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\Command.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\Command.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\Command.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\GeometryUtils.cs(25,7,25,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\IStairsConfiguration.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\LandingComponents\IStairsLandingComponent.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\LandingComponents\IStairsLandingComponent.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\LandingComponents\LandingComponentUtils.cs(25,7,25,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\LandingComponents\StairsRectangleLandingComponent.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\LandingComponents\StairsRectangleLandingComponent.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\CurvedStairsRunComponent.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\CurvedStairsRunComponent.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\IStairsRunComponent.cs(25,7,25,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\IStairsRunComponent.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\SketchedCurvedStairsRunComponent.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\SketchedCurvedStairsRunComponent.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\SketchedStraightStairsRunComponent.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\SketchedStraightStairsRunComponent.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\StraightStairsRunComponent.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\StraightStairsRunComponent.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\TransformedStairsComponent.cs(25,7,25,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsAutomationUtility.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsAutomationUtility.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsAutomationUtility.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsSingleCurvedRun.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsSingleCurvedRun.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsSingleSketchedCurvedRun.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsSingleSketchedCurvedRun.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsSingleSketchedStraightRun.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsSingleSketchedStraightRun.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsSingleStraightRun.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsSingleStraightRun.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsStandardConfiguration.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsStandardConfiguration.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\Command.cs(41,28,41,44): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\Command.cs(39,6,39,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\Command.cs(40,6,40,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\Command.cs(39,44,39,52): error CS0103: The name 'Autodesk' does not exist in the current context
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\Command.cs(40,45,40,53): error CS0103: The name 'Autodesk' does not exist in the current context
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\Command.cs(48,31,48,50): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\Command.cs(48,84,48,92): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\Command.cs(48,16,48,22): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\GeometryUtils.cs(40,56,40,61): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\GeometryUtils.cs(40,71,40,80): error CS0246: The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\GeometryUtils.cs(40,27,40,32): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\GeometryUtils.cs(58,42,58,47): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\GeometryUtils.cs(58,55,58,64): error CS0246: The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\GeometryUtils.cs(58,21,58,26): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\IStairsConfiguration.cs(48,30,48,38): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\IStairsConfiguration.cs(48,49,48,58): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\IStairsConfiguration.cs(62,28,62,36): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\IStairsConfiguration.cs(62,47,62,56): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\LandingComponents\IStairsLandingComponent.cs(41,9,41,18): error CS0246: The type or namespace name 'CurveLoop' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\LandingComponents\IStairsLandingComponent.cs(55,37,55,45): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\LandingComponents\IStairsLandingComponent.cs(55,56,55,65): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\LandingComponents\IStairsLandingComponent.cs(55,9,55,22): error CS0246: The type or namespace name 'StairsLanding' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\LandingComponents\LandingComponentUtils.cs(41,65,41,70): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\LandingComponents\LandingComponentUtils.cs(41,27,41,32): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\LandingComponents\LandingComponentUtils.cs(58,51,58,56): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\LandingComponents\LandingComponentUtils.cs(58,21,58,26): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\LandingComponents\LandingComponentUtils.cs(72,56,72,60): error CS0246: The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\LandingComponents\LandingComponentUtils.cs(72,68,72,72): error CS0246: The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\LandingComponents\LandingComponentUtils.cs(72,21,72,25): error CS0246: The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\LandingComponents\LandingComponentUtils.cs(101,45,101,50): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\LandingComponents\LandingComponentUtils.cs(101,58,101,61): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\LandingComponents\StairsRectangleLandingComponent.cs(67,16,67,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\LandingComponents\StairsRectangleLandingComponent.cs(92,38,92,46): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\LandingComponents\StairsRectangleLandingComponent.cs(92,57,92,66): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\LandingComponents\StairsRectangleLandingComponent.cs(92,10,92,23): error CS0246: The type or namespace name 'StairsLanding' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\LandingComponents\StairsRectangleLandingComponent.cs(35,52,35,75): error CS0738: 'StairsRectangleLandingComponent' does not implement interface member 'IStairsLandingComponent.GetLandingBoundary()'. 'StairsRectangleLandingComponent.GetLandingBoundary()' cannot implement 'IStairsLandingComponent.GetLandingBoundary()' because it does not have the matching return type of 'CurveLoop'.
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\LandingComponents\StairsRectangleLandingComponent.cs(45,48,45,52): error CS0246: The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\LandingComponents\StairsRectangleLandingComponent.cs(45,73,45,77): error CS0246: The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\LandingComponents\StairsRectangleLandingComponent.cs(45,98,45,101): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\LandingComponents\StairsRectangleLandingComponent.cs(56,17,56,21): error CS0246: The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\LandingComponents\StairsRectangleLandingComponent.cs(57,17,57,21): error CS0246: The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\LandingComponents\StairsRectangleLandingComponent.cs(58,17,58,20): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\CurvedStairsRunComponent.cs(132,20,132,25): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\CurvedStairsRunComponent.cs(145,14,145,19): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\CurvedStairsRunComponent.cs(153,14,153,19): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\CurvedStairsRunComponent.cs(161,14,161,17): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\CurvedStairsRunComponent.cs(180,71,180,79): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\CurvedStairsRunComponent.cs(180,90,180,99): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\CurvedStairsRunComponent.cs(180,14,180,22): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\CurvedStairsRunComponent.cs(215,15,215,20): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\IStairsRunComponent.cs(42,29,42,37): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\IStairsRunComponent.cs(42,48,42,57): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\IStairsRunComponent.cs(42,3,42,12): error CS0246: The type or namespace name 'StairsRun' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\IStairsRunComponent.cs(76,9,76,14): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\IStairsRunComponent.cs(84,3,84,8): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\IStairsRunComponent.cs(92,3,92,8): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\IStairsRunComponent.cs(101,3,101,6): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\CurvedStairsRunComponent.cs(35,65,35,84): error CS0738: 'CurvedStairsRunComponent' does not implement interface member 'IStairsRunComponent.CreateStairsRun(Document, ElementId)'. 'CurvedStairsRunComponent.CreateStairsRun(Document, ElementId)' cannot implement 'IStairsRunComponent.CreateStairsRun(Document, ElementId)' because it does not have the matching return type of 'StairsRun'.
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\CurvedStairsRunComponent.cs(48,59,48,67): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\CurvedStairsRunComponent.cs(75,61,75,69): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\CurvedStairsRunComponent.cs(76,41,76,50): error CS0246: The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\CurvedStairsRunComponent.cs(97,15,97,18): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\CurvedStairsRunComponent.cs(98,15,98,23): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\CurvedStairsRunComponent.cs(99,15,99,24): error CS0246: The type or namespace name 'StairsRun' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\SketchedCurvedStairsRunComponent.cs(143,20,143,28): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\SketchedCurvedStairsRunComponent.cs(155,14,155,19): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\SketchedCurvedStairsRunComponent.cs(163,14,163,19): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\SketchedCurvedStairsRunComponent.cs(171,20,171,28): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\SketchedCurvedStairsRunComponent.cs(198,14,198,17): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\SketchedCurvedStairsRunComponent.cs(206,20,206,28): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\SketchedCurvedStairsRunComponent.cs(221,71,221,79): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\SketchedCurvedStairsRunComponent.cs(221,90,221,99): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\SketchedCurvedStairsRunComponent.cs(221,14,221,22): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\SketchedCurvedStairsRunComponent.cs(36,73,36,92): error CS0738: 'SketchedCurvedStairsRunComponent' does not implement interface member 'IStairsRunComponent.CreateStairsRun(Document, ElementId)'. 'SketchedCurvedStairsRunComponent.CreateStairsRun(Document, ElementId)' cannot implement 'IStairsRunComponent.CreateStairsRun(Document, ElementId)' because it does not have the matching return type of 'StairsRun'.
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\SketchedCurvedStairsRunComponent.cs(36,73,36,92): error CS0738: 'SketchedCurvedStairsRunComponent' does not implement interface member 'IStairsRunComponent.GetStairsPath()'. 'SketchedCurvedStairsRunComponent.GetStairsPath()' cannot implement 'IStairsRunComponent.GetStairsPath()' because it does not have the matching return type of 'IList<Curve>'.
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\SketchedCurvedStairsRunComponent.cs(50,59,50,67): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\SketchedCurvedStairsRunComponent.cs(78,61,78,69): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\SketchedCurvedStairsRunComponent.cs(79,41,79,50): error CS0246: The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\SketchedCurvedStairsRunComponent.cs(101,15,101,18): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\SketchedCurvedStairsRunComponent.cs(102,15,102,23): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\SketchedCurvedStairsRunComponent.cs(103,15,103,24): error CS0246: The type or namespace name 'StairsRun' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\SketchedStraightStairsRunComponent.cs(124,22,124,30): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\SketchedStraightStairsRunComponent.cs(139,16,139,21): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\SketchedStraightStairsRunComponent.cs(147,16,147,21): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\SketchedStraightStairsRunComponent.cs(155,16,155,19): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\SketchedStraightStairsRunComponent.cs(163,22,163,30): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\SketchedStraightStairsRunComponent.cs(171,67,171,75): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\SketchedStraightStairsRunComponent.cs(171,86,171,95): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\SketchedStraightStairsRunComponent.cs(171,10,171,18): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\SketchedStraightStairsRunComponent.cs(205,23,205,31): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\SketchedStraightStairsRunComponent.cs(228,23,228,31): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\SketchedStraightStairsRunComponent.cs(35,83,35,102): error CS0738: 'SketchedStraightStairsRunComponent' does not implement interface member 'IStairsRunComponent.CreateStairsRun(Document, ElementId)'. 'SketchedStraightStairsRunComponent.CreateStairsRun(Document, ElementId)' cannot implement 'IStairsRunComponent.CreateStairsRun(Document, ElementId)' because it does not have the matching return type of 'StairsRun'.
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\SketchedStraightStairsRunComponent.cs(35,83,35,102): error CS0738: 'SketchedStraightStairsRunComponent' does not implement interface member 'IStairsRunComponent.GetStairsPath()'. 'SketchedStraightStairsRunComponent.GetStairsPath()' cannot implement 'IStairsRunComponent.GetStairsPath()' because it does not have the matching return type of 'IList<Curve>'.
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\SketchedStraightStairsRunComponent.cs(64,129,64,138): error CS0246: The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\SketchedStraightStairsRunComponent.cs(81,17,81,20): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\SketchedStraightStairsRunComponent.cs(82,17,82,20): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\SketchedStraightStairsRunComponent.cs(83,17,83,26): error CS0246: The type or namespace name 'StairsRun' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\StraightStairsRunComponent.cs(96,16,96,20): error CS0246: The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\StraightStairsRunComponent.cs(134,22,134,27): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\StraightStairsRunComponent.cs(147,13,147,18): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\StraightStairsRunComponent.cs(155,16,155,21): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\StraightStairsRunComponent.cs(163,16,163,19): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\StraightStairsRunComponent.cs(171,67,171,75): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\StraightStairsRunComponent.cs(171,86,171,95): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\StraightStairsRunComponent.cs(171,10,171,18): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\StraightStairsRunComponent.cs(206,17,206,22): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\StraightStairsRunComponent.cs(35,75,35,94): error CS0738: 'StraightStairsRunComponent' does not implement interface member 'IStairsRunComponent.CreateStairsRun(Document, ElementId)'. 'StraightStairsRunComponent.CreateStairsRun(Document, ElementId)' cannot implement 'IStairsRunComponent.CreateStairsRun(Document, ElementId)' because it does not have the matching return type of 'StairsRun'.
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\StraightStairsRunComponent.cs(64,44,64,53): error CS0246: The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\StraightStairsRunComponent.cs(79,17,79,20): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\StraightStairsRunComponent.cs(80,17,80,20): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\StraightStairsRunComponent.cs(81,17,81,26): error CS0246: The type or namespace name 'StairsRun' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\TransformedStairsComponent.cs(57,29,57,32): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\TransformedStairsComponent.cs(57,10,57,13): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\TransformedStairsComponent.cs(68,26,68,31): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\TransformedStairsComponent.cs(68,10,68,15): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\TransformedStairsComponent.cs(78,25,78,29): error CS0246: The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\TransformedStairsComponent.cs(78,10,78,14): error CS0246: The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\TransformedStairsComponent.cs(88,45,88,50): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\TransformedStairsComponent.cs(88,22,88,27): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\TransformedStairsComponent.cs(47,37,47,46): error CS0246: The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\RunComponents\TransformedStairsComponent.cs(34,11,34,20): error CS0246: The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsAutomationUtility.cs(45,16,45,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsAutomationUtility.cs(50,16,50,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsAutomationUtility.cs(55,19,55,27): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsAutomationUtility.cs(66,19,66,27): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsAutomationUtility.cs(91,54,91,62): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsAutomationUtility.cs(122,68,122,76): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsAutomationUtility.cs(122,30,122,35): error CS0246: The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsAutomationUtility.cs(122,37,122,42): error CS0246: The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsAutomationUtility.cs(122,44,122,49): error CS0246: The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsAutomationUtility.cs(79,43,79,51): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsAutomationUtility.cs(38,17,38,25): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsAutomationUtility.cs(39,17,39,23): error CS0246: The type or namespace name 'Stairs' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsAutomationUtility.cs(277,49,277,70): error CS0246: The type or namespace name 'IFailuresPreprocessor' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsAutomationUtility.cs(279,59,279,75): error CS0246: The type or namespace name 'FailuresAccessor' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsAutomationUtility.cs(279,16,279,39): error CS0246: The type or namespace name 'FailureProcessingResult' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsConfiguration.cs(55,31,55,39): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsConfiguration.cs(55,68,55,76): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsConfiguration.cs(71,29,71,37): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsConfiguration.cs(71,66,71,74): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsConfiguration.cs(31,37,31,57): error CS0535: 'StairsConfiguration' does not implement interface member 'IStairsConfiguration.CreateStairsRun(Document, ElementId, int)'
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsConfiguration.cs(31,37,31,57): error CS0535: 'StairsConfiguration' does not implement interface member 'IStairsConfiguration.CreateLanding(Document, ElementId, int)'
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsSingleCurvedRun.cs(44,38,44,44): error CS0246: The type or namespace name 'Stairs' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsSingleCurvedRun.cs(44,53,44,58): error CS0246: The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsSingleCurvedRun.cs(58,38,58,44): error CS0246: The type or namespace name 'Stairs' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsSingleCurvedRun.cs(58,53,58,58): error CS0246: The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsSingleCurvedRun.cs(58,92,58,101): error CS0246: The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsSingleSketchedCurvedRun.cs(44,46,44,52): error CS0246: The type or namespace name 'Stairs' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsSingleSketchedCurvedRun.cs(44,61,44,66): error CS0246: The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsSingleSketchedCurvedRun.cs(59,46,59,52): error CS0246: The type or namespace name 'Stairs' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsSingleSketchedCurvedRun.cs(59,61,59,66): error CS0246: The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsSingleSketchedCurvedRun.cs(59,100,59,109): error CS0246: The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsSingleSketchedStraightRun.cs(42,48,42,54): error CS0246: The type or namespace name 'Stairs' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsSingleSketchedStraightRun.cs(42,63,42,68): error CS0246: The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsSingleSketchedStraightRun.cs(55,48,55,54): error CS0246: The type or namespace name 'Stairs' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsSingleSketchedStraightRun.cs(55,63,55,68): error CS0246: The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsSingleSketchedStraightRun.cs(55,82,55,91): error CS0246: The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsSingleStraightRun.cs(42,40,42,46): error CS0246: The type or namespace name 'Stairs' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsSingleStraightRun.cs(42,55,42,60): error CS0246: The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsSingleStraightRun.cs(54,40,54,46): error CS0246: The type or namespace name 'Stairs' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsSingleStraightRun.cs(54,55,54,60): error CS0246: The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsSingleStraightRun.cs(54,74,54,83): error CS0246: The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsStandardConfiguration.cs(200,62,200,66): error CS0246: The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsStandardConfiguration.cs(200,79,200,83): error CS0246: The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsStandardConfiguration.cs(200,96,200,99): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsStandardConfiguration.cs(216,70,216,79): error CS0246: The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsStandardConfiguration.cs(226,17,226,25): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsStandardConfiguration.cs(255,35,255,43): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsStandardConfiguration.cs(255,54,255,63): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsStandardConfiguration.cs(293,33,293,41): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsStandardConfiguration.cs(293,52,293,61): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsStandardConfiguration.cs(336,17,336,26): error CS0246: The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsStandardConfiguration.cs(133,42,133,48): error CS0246: The type or namespace name 'Stairs' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsStandardConfiguration.cs(133,57,133,62): error CS0246: The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsStandardConfiguration.cs(151,42,151,48): error CS0246: The type or namespace name 'Stairs' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsStandardConfiguration.cs(151,57,151,62): error CS0246: The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsStandardConfiguration.cs(151,98,151,107): error CS0246: The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsStandardConfiguration.cs(41,15,41,21): error CS0246: The type or namespace name 'Stairs' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsStandardConfiguration.cs(42,15,42,25): error CS0246: The type or namespace name 'StairsType' could not be found (are you missing a using directive or an assembly reference?)
153>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\StairsAutomation\CS\StairsStandardConfiguration.cs(44,15,44,24): error CS0246: The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)
154>------ Rebuild All started: Project: DisableCommand, Configuration: Debug Any CPU ------
154>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
154>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
154>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
154>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisableCommand\CS\Application.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
154>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisableCommand\CS\Application.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
154>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisableCommand\CS\Application.cs(37,32,37,52): error CS0246: The type or namespace name 'IExternalApplication' could not be found (are you missing a using directive or an assembly reference?)
154>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisableCommand\CS\Application.cs(46,33,46,56): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
154>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisableCommand\CS\Application.cs(46,16,46,22): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
154>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisableCommand\CS\Application.cs(83,34,83,57): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
154>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisableCommand\CS\Application.cs(83,16,83,22): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
154>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisableCommand\CS\Application.cs(98,50,98,67): error CS0246: The type or namespace name 'ExecutedEventArgs' could not be found (are you missing a using directive or an assembly reference?)
154>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisableCommand\CS\Application.cs(130,16,130,30): error CS0246: The type or namespace name 'RevitCommandId' could not be found (are you missing a using directive or an assembly reference?)
155>------ Rebuild All started: Project: ScheduleCreation, Configuration: Debug Any CPU ------
152>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
152>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
152>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceAnalysis\Analyzer.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceAnalysis\Analyzer.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceAnalysis\Command.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceAnalysis\MainWindow.xaml.cs(36,7,36,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceAnalysis\MainWindow.xaml.cs(37,7,37,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceAnalysis\PartIdInfo.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceAnalysis\PartIdInfo.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\CommandReadPreferences.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\CommandReadPreferences.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\CommandWritePreferences.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\CommandWritePreferences.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilder.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilder.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilderUtility.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilderUtility.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\Utility.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceAnalysis\Analyzer.cs(101,61,101,85): error CS0246: The type or namespace name 'RoutingPreferenceManager' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceAnalysis\Analyzer.cs(101,112,101,120): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceAnalysis\Analyzer.cs(200,59,200,83): error CS0246: The type or namespace name 'RoutingPreferenceManager' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceAnalysis\Analyzer.cs(200,110,200,140): error CS0246: The type or namespace name 'RoutingPreferenceRuleGroupType' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceAnalysis\Analyzer.cs(241,51,241,75): error CS0246: The type or namespace name 'RoutingPreferenceManager' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceAnalysis\Analyzer.cs(241,140,241,149): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceAnalysis\Analyzer.cs(241,161,241,191): error CS0246: The type or namespace name 'RoutingPreferenceRuleGroupType' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceAnalysis\Analyzer.cs(269,43,269,67): error CS0246: The type or namespace name 'RoutingPreferenceManager' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceAnalysis\Analyzer.cs(269,94,269,124): error CS0246: The type or namespace name 'RoutingPreferenceRuleGroupType' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceAnalysis\Analyzer.cs(292,44,292,68): error CS0246: The type or namespace name 'RoutingPreferenceManager' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceAnalysis\Analyzer.cs(292,95,292,125): error CS0246: The type or namespace name 'RoutingPreferenceRuleGroupType' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceAnalysis\Analyzer.cs(316,51,316,75): error CS0246: The type or namespace name 'RoutingPreferenceManager' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceAnalysis\Analyzer.cs(356,39,356,48): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceAnalysis\Analyzer.cs(363,39,363,48): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceAnalysis\Analyzer.cs(52,25,52,49): error CS0246: The type or namespace name 'RoutingPreferenceManager' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceAnalysis\Analyzer.cs(52,76,52,84): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceAnalysis\Analyzer.cs(65,25,65,49): error CS0246: The type or namespace name 'RoutingPreferenceManager' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceAnalysis\Analyzer.cs(65,92,65,100): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceAnalysis\Analyzer.cs(41,17,41,25): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceAnalysis\Analyzer.cs(42,17,42,25): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceAnalysis\Command.cs(34,28,34,36): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceAnalysis\Command.cs(33,6,33,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceAnalysis\Command.cs(33,44,33,52): error CS0103: The name 'Autodesk' does not exist in the current context
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceAnalysis\Command.cs(52,49,52,57): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceAnalysis\Command.cs(52,120,52,128): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceAnalysis\Command.cs(52,16,52,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceAnalysis\MainWindow.xaml.cs(111,17,111,25): error CS0246: The type or namespace name 'PipeType' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceAnalysis\MainWindow.xaml.cs(52,27,52,35): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceAnalysis\MainWindow.xaml.cs(175,17,175,25): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceAnalysis\PartIdInfo.cs(49,21,49,30): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceAnalysis\PartIdInfo.cs(57,16,57,46): error CS0246: The type or namespace name 'RoutingPreferenceRuleGroupType' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceAnalysis\PartIdInfo.cs(79,32,79,40): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceAnalysis\PartIdInfo.cs(88,39,88,47): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceAnalysis\PartIdInfo.cs(88,58,88,67): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceAnalysis\PartIdInfo.cs(116,40,116,48): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceAnalysis\PartIdInfo.cs(67,27,67,57): error CS0246: The type or namespace name 'RoutingPreferenceRuleGroupType' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceAnalysis\PartIdInfo.cs(67,75,67,84): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceAnalysis\PartIdInfo.cs(42,22,42,31): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceAnalysis\PartIdInfo.cs(44,17,44,47): error CS0246: The type or namespace name 'RoutingPreferenceRuleGroupType' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\CommandReadPreferences.cs(42,43,42,51): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\CommandReadPreferences.cs(41,6,41,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\CommandReadPreferences.cs(41,44,41,52): error CS0103: The name 'Autodesk' does not exist in the current context
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\CommandReadPreferences.cs(60,49,60,57): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\CommandReadPreferences.cs(60,120,60,128): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\CommandReadPreferences.cs(60,16,60,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\CommandWritePreferences.cs(42,44,42,52): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\CommandWritePreferences.cs(41,6,41,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\CommandWritePreferences.cs(41,44,41,52): error CS0103: The name 'Autodesk' does not exist in the current context
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\CommandWritePreferences.cs(60,49,60,57): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\CommandWritePreferences.cs(60,120,60,128): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\CommandWritePreferences.cs(60,16,60,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilder.cs(268,51,268,63): error CS0246: The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilder.cs(308,55,308,63): error CS0246: The type or namespace name 'PipeType' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilder.cs(325,53,325,61): error CS0246: The type or namespace name 'PipeType' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilder.cs(345,61,345,77): error CS0246: The type or namespace name 'PipeScheduleType' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilder.cs(407,49,407,60): error CS0246: The type or namespace name 'PipeSegment' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilder.cs(431,73,431,81): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilder.cs(431,22,431,29): error CS0246: The type or namespace name 'MEPSize' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilder.cs(472,52,472,59): error CS0246: The type or namespace name 'MEPSize' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilder.cs(472,66,472,74): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilder.cs(524,62,524,86): error CS0246: The type or namespace name 'RoutingPreferenceManager' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilder.cs(577,98,577,128): error CS0246: The type or namespace name 'RoutingPreferenceRuleGroupType' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilder.cs(577,15,577,36): error CS0246: The type or namespace name 'RoutingPreferenceRule' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilder.cs(653,59,653,80): error CS0246: The type or namespace name 'RoutingPreferenceRule' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilder.cs(653,87,653,117): error CS0246: The type or namespace name 'RoutingPreferenceRuleGroupType' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilder.cs(702,52,702,61): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilder.cs(712,44,712,53): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilder.cs(722,43,722,52): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilder.cs(732,43,732,52): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilder.cs(744,43,744,52): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilder.cs(744,65,744,74): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilder.cs(744,17,744,26): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilder.cs(761,44,761,53): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilder.cs(771,17,771,26): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilder.cs(784,17,784,26): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilder.cs(798,17,798,26): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilder.cs(811,17,811,26): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilder.cs(825,17,825,26): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilder.cs(879,60,879,68): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilder.cs(879,28,879,39): error CS0246: The type or namespace name 'PipeSegment' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilder.cs(892,57,892,65): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilder.cs(892,28,892,40): error CS0246: The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilder.cs(906,55,906,63): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilder.cs(906,29,906,37): error CS0246: The type or namespace name 'Material' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilder.cs(919,70,919,78): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilder.cs(919,28,919,44): error CS0246: The type or namespace name 'PipeScheduleType' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilder.cs(932,54,932,62): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilder.cs(932,28,932,36): error CS0246: The type or namespace name 'PipeType' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilder.cs(54,41,54,49): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilder.cs(42,29,42,36): error CS0246: The type or namespace name 'Segment' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilder.cs(43,29,43,41): error CS0246: The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilder.cs(44,29,44,37): error CS0246: The type or namespace name 'Material' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilder.cs(45,29,45,45): error CS0246: The type or namespace name 'PipeScheduleType' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilder.cs(46,29,46,37): error CS0246: The type or namespace name 'PipeType' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilder.cs(47,17,47,25): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilderUtility.cs(44,32,44,40): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\RoutingPreferenceBuilder\RoutingPreferenceBuilderUtility.cs(183,17,183,25): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\Utility.cs(34,38,34,46): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\Utility.cs(43,47,43,55): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\Utility.cs(61,74,61,82): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
152>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RoutingPreferenceTools\CS\Utility.cs(68,65,68,73): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
155>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
155>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
155>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
155>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleCreation\CS\Command.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
155>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleCreation\CS\Command.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
155>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleCreation\CS\Command.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
155>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleCreation\CS\ScheduleCreationUtility.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
155>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleCreation\CS\ScheduleCreationUtility.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
155>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleCreation\CS\Command.cs(40,28,40,44): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
155>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleCreation\CS\Command.cs(38,6,38,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
155>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleCreation\CS\Command.cs(39,6,39,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
155>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleCreation\CS\Command.cs(38,44,38,52): error CS0103: The name 'Autodesk' does not exist in the current context
155>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleCreation\CS\Command.cs(39,45,39,53): error CS0103: The name 'Autodesk' does not exist in the current context
155>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleCreation\CS\Command.cs(58,39,58,58): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
155>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleCreation\CS\Command.cs(59,35,59,45): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
155>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleCreation\CS\Command.cs(58,24,58,30): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
155>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleCreation\CS\ScheduleCreationUtility.cs(43,43,43,53): error CS0246: The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)
155>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleCreation\CS\ScheduleCreationUtility.cs(63,44,63,52): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
155>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleCreation\CS\ScheduleCreationUtility.cs(63,63,63,75): error CS0246: The type or namespace name 'ViewSchedule' could not be found (are you missing a using directive or an assembly reference?)
155>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleCreation\CS\ScheduleCreationUtility.cs(114,59,114,69): error CS0246: The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)
155>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleCreation\CS\ScheduleCreationUtility.cs(114,29,114,41): error CS0246: The type or namespace name 'ViewSchedule' could not be found (are you missing a using directive or an assembly reference?)
155>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleCreation\CS\ScheduleCreationUtility.cs(195,33,195,42): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
155>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleCreation\CS\ScheduleCreationUtility.cs(37,24,37,40): error CS0246: The type or namespace name 'BuiltInParameter' could not be found (are you missing a using directive or an assembly reference?)
156>------ Rebuild All started: Project: FreeFormElement, Configuration: Debug Any CPU ------
157>------ Rebuild All started: Project: DisplacementElementAnimation, Configuration: Debug Any CPU ------
156>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
156>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
156>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
156>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\Application.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
156>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\Application.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
156>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\Application.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
156>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\Application.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
156>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\Application.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
156>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\CreateNegativeBlockCommand.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
156>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\CreateNegativeBlockCommand.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
156>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\CreateNegativeBlockCommand.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
156>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\FreeFormElementUtils.cs(30,30,30,38): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
156>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\FreeFormElementUtils.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
156>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\Application.cs(44,32,44,52): error CS0246: The type or namespace name 'IExternalApplication' could not be found (are you missing a using directive or an assembly reference?)
156>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\Application.cs(42,6,42,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
156>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\Application.cs(43,6,43,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
156>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\Application.cs(42,44,42,52): error CS0103: The name 'Autodesk' does not exist in the current context
156>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\Application.cs(43,45,43,53): error CS0103: The name 'Autodesk' does not exist in the current context
156>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\Application.cs(52,34,52,57): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
156>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\Application.cs(52,16,52,22): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
156>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\Application.cs(62,33,62,56): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
156>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\Application.cs(62,16,62,22): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
156>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\Application.cs(75,49,75,72): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
156>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\Application.cs(91,51,91,61): error CS0246: The type or namespace name 'PushButton' could not be found (are you missing a using directive or an assembly reference?)
156>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\CreateNegativeBlockCommand.cs(39,40,39,56): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
156>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\CreateNegativeBlockCommand.cs(38,6,38,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
156>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\CreateNegativeBlockCommand.cs(38,44,38,52): error CS0103: The name 'Autodesk' does not exist in the current context
156>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\CreateNegativeBlockCommand.cs(43,31,43,50): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
156>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\CreateNegativeBlockCommand.cs(43,84,43,92): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
156>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\CreateNegativeBlockCommand.cs(43,16,43,22): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
156>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\CreateNegativeBlockCommand.cs(99,42,99,58): error CS0246: The type or namespace name 'ISelectionFilter' could not be found (are you missing a using directive or an assembly reference?)
156>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\CreateNegativeBlockCommand.cs(101,34,101,41): error CS0246: The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)
156>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\CreateNegativeBlockCommand.cs(109,36,109,45): error CS0246: The type or namespace name 'Reference' could not be found (are you missing a using directive or an assembly reference?)
156>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\CreateNegativeBlockCommand.cs(109,53,109,56): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
156>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\CreateNegativeBlockCommand.cs(118,37,118,53): error CS0246: The type or namespace name 'ISelectionFilter' could not be found (are you missing a using directive or an assembly reference?)
156>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\CreateNegativeBlockCommand.cs(120,34,120,41): error CS0246: The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)
156>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\CreateNegativeBlockCommand.cs(137,36,137,45): error CS0246: The type or namespace name 'Reference' could not be found (are you missing a using directive or an assembly reference?)
156>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\CreateNegativeBlockCommand.cs(137,53,137,56): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
156>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\FreeFormElementUtils.cs(55,60,55,67): error CS0246: The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)
156>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\FreeFormElementUtils.cs(55,89,55,98): error CS0246: The type or namespace name 'Reference' could not be found (are you missing a using directive or an assembly reference?)
156>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\FreeFormElementUtils.cs(55,112,55,130): error CS0246: The type or namespace name 'IFamilyLoadOptions' could not be found (are you missing a using directive or an assembly reference?)
156>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\FreeFormElementUtils.cs(169,81,169,89): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
156>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\FreeFormElementUtils.cs(169,101,169,110): error CS0246: The type or namespace name 'Reference' could not be found (are you missing a using directive or an assembly reference?)
156>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\FreeFormElementUtils.cs(169,29,169,34): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
156>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\FreeFormElementUtils.cs(217,50,217,55): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
156>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\FreeFormElementUtils.cs(217,24,217,29): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
156>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\FreeFormElementUtils.cs(244,50,244,55): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
156>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\FreeFormElementUtils.cs(254,45,254,50): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
156>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\FreeFormElementUtils.cs(284,52,284,59): error CS0246: The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)
156>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FreeFormElement\CS\FreeFormElementUtils.cs(284,29,284,34): error CS0246: The type or namespace name 'Solid' could not be found (are you missing a using directive or an assembly reference?)
158>------ Rebuild All started: Project: PostCommandWorkflow, Configuration: Debug Any CPU ------
157>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
157>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
157>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
157>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\Application.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
157>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\Application.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
157>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\Application.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
157>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\Application.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
157>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\Application.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
157>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\DisplacementStructureModelAnimator.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
157>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\DisplacementStructureModelAnimator.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
157>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\DisplacementStructureModelAnimator.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
157>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\DisplacementStructureModelAnimatorCommand.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
157>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\Application.cs(44,32,44,52): error CS0246: The type or namespace name 'IExternalApplication' could not be found (are you missing a using directive or an assembly reference?)
157>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\Application.cs(42,6,42,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
157>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\Application.cs(43,6,43,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
157>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\Application.cs(42,44,42,52): error CS0103: The name 'Autodesk' does not exist in the current context
157>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\Application.cs(43,45,43,53): error CS0103: The name 'Autodesk' does not exist in the current context
157>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\Application.cs(52,34,52,57): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
157>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\Application.cs(52,16,52,22): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
157>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\Application.cs(62,33,62,56): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
157>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\Application.cs(62,16,62,22): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
157>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\Application.cs(74,46,74,69): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
157>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\Application.cs(90,51,90,61): error CS0246: The type or namespace name 'PushButton' could not be found (are you missing a using directive or an assembly reference?)
157>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\DisplacementStructureModelAnimator.cs(172,79,172,88): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
157>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\DisplacementStructureModelAnimator.cs(173,55,173,60): error CS0246: The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)
157>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\DisplacementStructureModelAnimator.cs(173,68,173,83): error CS0246: The type or namespace name 'BuiltInCategory' could not be found (are you missing a using directive or an assembly reference?)
157>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\DisplacementStructureModelAnimator.cs(192,88,192,97): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
157>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\DisplacementStructureModelAnimator.cs(193,64,193,69): error CS0246: The type or namespace name 'Level' could not be found (are you missing a using directive or an assembly reference?)
157>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\DisplacementStructureModelAnimator.cs(193,77,193,92): error CS0246: The type or namespace name 'BuiltInCategory' could not be found (are you missing a using directive or an assembly reference?)
157>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\DisplacementStructureModelAnimator.cs(218,52,218,60): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
157>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\DisplacementStructureModelAnimator.cs(218,78,218,87): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
157>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\DisplacementStructureModelAnimator.cs(218,94,218,98): error CS0246: The type or namespace name 'View' could not be found (are you missing a using directive or an assembly reference?)
157>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\DisplacementStructureModelAnimator.cs(282,56,282,75): error CS0246: The type or namespace name 'DisplacementElement' could not be found (are you missing a using directive or an assembly reference?)
157>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\DisplacementStructureModelAnimator.cs(292,39,292,58): error CS0246: The type or namespace name 'DisplacementElement' could not be found (are you missing a using directive or an assembly reference?)
157>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\DisplacementStructureModelAnimator.cs(292,17,292,20): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
157>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\DisplacementStructureModelAnimator.cs(315,42,315,49): error CS0246: The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)
157>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\DisplacementStructureModelAnimator.cs(315,53,315,56): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
157>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\DisplacementStructureModelAnimator.cs(315,17,315,20): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
157>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\DisplacementStructureModelAnimator.cs(360,52,360,67): error CS0246: The type or namespace name 'IdlingEventArgs' could not be found (are you missing a using directive or an assembly reference?)
157>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\DisplacementStructureModelAnimator.cs(388,48,388,51): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
157>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\DisplacementStructureModelAnimator.cs(388,24,388,27): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
157>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\DisplacementStructureModelAnimator.cs(399,44,399,47): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
157>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\DisplacementStructureModelAnimator.cs(399,24,399,27): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
157>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\DisplacementStructureModelAnimator.cs(409,53,409,60): error CS0246: The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)
157>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\DisplacementStructureModelAnimator.cs(409,24,409,27): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
157>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\DisplacementStructureModelAnimator.cs(377,51,377,64): error CS0246: The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)
157>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\DisplacementStructureModelAnimator.cs(428,17,428,30): error CS0246: The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)
157>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\DisplacementStructureModelAnimator.cs(433,22,433,41): error CS0246: The type or namespace name 'DisplacementElement' could not be found (are you missing a using directive or an assembly reference?)
157>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\DisplacementStructureModelAnimator.cs(439,17,439,36): error CS0246: The type or namespace name 'DisplacementElement' could not be found (are you missing a using directive or an assembly reference?)
157>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\DisplacementStructureModelAnimator.cs(484,17,484,20): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
157>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\DisplacementStructureModelAnimatorCommand.cs(35,55,35,71): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
157>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\DisplacementStructureModelAnimatorCommand.cs(34,6,34,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
157>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\DisplacementStructureModelAnimatorCommand.cs(34,44,34,52): error CS0103: The name 'Autodesk' does not exist in the current context
157>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\DisplacementStructureModelAnimatorCommand.cs(39,31,39,50): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
157>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\DisplacementStructureModelAnimatorCommand.cs(39,84,39,92): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
157>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\DisplacementStructureModelAnimatorCommand.cs(39,16,39,22): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
157>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\DisplacementStructureModelAnimatorCommand.cs(53,65,53,81): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
157>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\DisplacementStructureModelAnimatorCommand.cs(52,6,52,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
157>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\DisplacementStructureModelAnimatorCommand.cs(52,44,52,52): error CS0103: The name 'Autodesk' does not exist in the current context
157>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\DisplacementStructureModelAnimatorCommand.cs(59,30,59,49): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
157>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\DisplacementStructureModelAnimatorCommand.cs(59,83,59,91): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
157>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DisplacementElementAnimation\CS\DisplacementStructureModelAnimatorCommand.cs(59,15,59,21): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
159>------ Rebuild All started: Project: ScheduleAutomaticFormatter, Configuration: Debug Any CPU ------
158>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
158>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
158>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
158>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PostCommandWorkflow\CS\Application.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
158>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PostCommandWorkflow\CS\Application.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
158>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PostCommandWorkflow\CS\Application.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
158>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PostCommandWorkflow\CS\Application.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
158>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PostCommandWorkflow\CS\Application.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
158>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PostCommandWorkflow\CS\PostCommandRevisionMonitor.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
158>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PostCommandWorkflow\CS\PostCommandRevisionMonitor.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
158>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PostCommandWorkflow\CS\PostCommandRevisionMonitor.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
158>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PostCommandWorkflow\CS\PostCommandRevisionMonitor.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
158>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PostCommandWorkflow\CS\PostCommandRevisionMonitorCommand.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
158>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PostCommandWorkflow\CS\PostCommandRevisionMonitorCommand.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
158>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PostCommandWorkflow\CS\PostCommandRevisionMonitorCommand.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
158>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PostCommandWorkflow\CS\PostCommandRevisionMonitorCommand.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
158>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PostCommandWorkflow\CS\Application.cs(44,32,44,52): error CS0246: The type or namespace name 'IExternalApplication' could not be found (are you missing a using directive or an assembly reference?)
158>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PostCommandWorkflow\CS\Application.cs(42,6,42,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
158>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PostCommandWorkflow\CS\Application.cs(43,6,43,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
158>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PostCommandWorkflow\CS\Application.cs(42,44,42,52): error CS0103: The name 'Autodesk' does not exist in the current context
158>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PostCommandWorkflow\CS\Application.cs(43,45,43,53): error CS0103: The name 'Autodesk' does not exist in the current context
158>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PostCommandWorkflow\CS\Application.cs(52,34,52,57): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
158>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PostCommandWorkflow\CS\Application.cs(52,16,52,22): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
158>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PostCommandWorkflow\CS\Application.cs(62,33,62,56): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
158>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PostCommandWorkflow\CS\Application.cs(62,16,62,22): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
158>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PostCommandWorkflow\CS\Application.cs(74,36,74,59): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
158>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PostCommandWorkflow\CS\Application.cs(93,51,93,61): error CS0246: The type or namespace name 'PushButton' could not be found (are you missing a using directive or an assembly reference?)
158>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PostCommandWorkflow\CS\PostCommandRevisionMonitor.cs(78,64,78,87): error CS0246: The type or namespace name 'DocumentSavingEventArgs' could not be found (are you missing a using directive or an assembly reference?)
158>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PostCommandWorkflow\CS\PostCommandRevisionMonitor.cs(141,58,141,83): error CS0246: The type or namespace name 'DialogBoxShowingEventArgs' could not be found (are you missing a using directive or an assembly reference?)
158>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PostCommandWorkflow\CS\PostCommandRevisionMonitor.cs(154,73,154,96): error CS0246: The type or namespace name 'BeforeExecutedEventArgs' could not be found (are you missing a using directive or an assembly reference?)
158>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PostCommandWorkflow\CS\PostCommandRevisionMonitor.cs(209,53,209,66): error CS0246: The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)
158>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PostCommandWorkflow\CS\PostCommandRevisionMonitor.cs(231,47,231,60): error CS0246: The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)
158>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PostCommandWorkflow\CS\PostCommandRevisionMonitor.cs(270,45,270,53): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
158>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PostCommandWorkflow\CS\PostCommandRevisionMonitor.cs(44,43,44,51): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
158>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PostCommandWorkflow\CS\PostCommandRevisionMonitor.cs(253,17,253,25): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
158>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PostCommandWorkflow\CS\PostCommandRevisionMonitor.cs(258,17,258,36): error CS0246: The type or namespace name 'AddInCommandBinding' could not be found (are you missing a using directive or an assembly reference?)
158>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PostCommandWorkflow\CS\PostCommandRevisionMonitor.cs(263,17,263,25): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
158>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PostCommandWorkflow\CS\PostCommandRevisionMonitor.cs(164,49,164,70): error CS0246: The type or namespace name 'IExternalEventHandler' could not be found (are you missing a using directive or an assembly reference?)
158>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PostCommandWorkflow\CS\PostCommandRevisionMonitor.cs(172,33,172,46): error CS0246: The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)
158>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PostCommandWorkflow\CS\PostCommandRevisionMonitorCommand.cs(38,54,38,70): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
158>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PostCommandWorkflow\CS\PostCommandRevisionMonitorCommand.cs(37,6,37,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
158>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PostCommandWorkflow\CS\PostCommandRevisionMonitorCommand.cs(37,44,37,52): error CS0103: The name 'Autodesk' does not exist in the current context
158>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PostCommandWorkflow\CS\PostCommandRevisionMonitorCommand.cs(49,31,49,50): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
158>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PostCommandWorkflow\CS\PostCommandRevisionMonitorCommand.cs(49,84,49,94): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
158>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PostCommandWorkflow\CS\PostCommandRevisionMonitorCommand.cs(49,16,49,22): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
158>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PostCommandWorkflow\CS\PostCommandRevisionMonitorCommand.cs(74,42,74,52): error CS0246: The type or namespace name 'PushButton' could not be found (are you missing a using directive or an assembly reference?)
158>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PostCommandWorkflow\CS\PostCommandRevisionMonitorCommand.cs(87,24,87,34): error CS0246: The type or namespace name 'PushButton' could not be found (are you missing a using directive or an assembly reference?)
160>------ Rebuild All started: Project: ScheduleToHTML, Configuration: Debug Any CPU ------
159>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
159>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
159>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
159>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleAutomaticFormatter\CS\Application.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
159>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleAutomaticFormatter\CS\Application.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
159>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleAutomaticFormatter\CS\Application.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
159>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleAutomaticFormatter\CS\Application.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
159>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleAutomaticFormatter\CS\Application.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
159>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleAutomaticFormatter\CS\ScheduleFormatter.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
159>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleAutomaticFormatter\CS\ScheduleFormatter.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
159>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleAutomaticFormatter\CS\ScheduleFormatterCommand.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
159>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleAutomaticFormatter\CS\ScheduleFormatterCommand.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
159>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleAutomaticFormatter\CS\ScheduleFormatterCommand.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
159>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleAutomaticFormatter\CS\Application.cs(44,32,44,52): error CS0246: The type or namespace name 'IExternalApplication' could not be found (are you missing a using directive or an assembly reference?)
159>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleAutomaticFormatter\CS\Application.cs(42,6,42,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
159>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleAutomaticFormatter\CS\Application.cs(43,6,43,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
159>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleAutomaticFormatter\CS\Application.cs(42,44,42,52): error CS0103: The name 'Autodesk' does not exist in the current context
159>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleAutomaticFormatter\CS\Application.cs(43,45,43,53): error CS0103: The name 'Autodesk' does not exist in the current context
159>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleAutomaticFormatter\CS\Application.cs(52,34,52,57): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
159>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleAutomaticFormatter\CS\Application.cs(52,16,52,22): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
159>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleAutomaticFormatter\CS\Application.cs(62,33,62,56): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
159>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleAutomaticFormatter\CS\Application.cs(62,16,62,22): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
159>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleAutomaticFormatter\CS\Application.cs(70,51,70,74): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
159>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleAutomaticFormatter\CS\Application.cs(89,51,89,61): error CS0246: The type or namespace name 'PushButton' could not be found (are you missing a using directive or an assembly reference?)
159>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleAutomaticFormatter\CS\ScheduleFormatter.cs(35,31,35,39): error CS0246: The type or namespace name 'IUpdater' could not be found (are you missing a using directive or an assembly reference?)
159>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleAutomaticFormatter\CS\ScheduleFormatter.cs(41,43,41,55): error CS0246: The type or namespace name 'ViewSchedule' could not be found (are you missing a using directive or an assembly reference?)
159>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleAutomaticFormatter\CS\ScheduleFormatter.cs(86,16,86,22): error CS0246: The type or namespace name 'Schema' could not be found (are you missing a using directive or an assembly reference?)
159>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleAutomaticFormatter\CS\ScheduleFormatter.cs(95,16,95,23): error CS0246: The type or namespace name 'AddInId' could not be found (are you missing a using directive or an assembly reference?)
159>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleAutomaticFormatter\CS\ScheduleFormatter.cs(116,29,116,40): error CS0246: The type or namespace name 'UpdaterData' could not be found (are you missing a using directive or an assembly reference?)
159>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleAutomaticFormatter\CS\ScheduleFormatter.cs(139,16,139,30): error CS0246: The type or namespace name 'ChangePriority' could not be found (are you missing a using directive or an assembly reference?)
159>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleAutomaticFormatter\CS\ScheduleFormatter.cs(148,16,148,25): error CS0246: The type or namespace name 'UpdaterId' could not be found (are you missing a using directive or an assembly reference?)
159>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleAutomaticFormatter\CS\ScheduleFormatterCommand.cs(38,38,38,54): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
159>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleAutomaticFormatter\CS\ScheduleFormatterCommand.cs(37,6,37,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
159>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleAutomaticFormatter\CS\ScheduleFormatterCommand.cs(37,44,37,52): error CS0103: The name 'Autodesk' does not exist in the current context
159>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleAutomaticFormatter\CS\ScheduleFormatterCommand.cs(50,31,50,50): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
159>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleAutomaticFormatter\CS\ScheduleFormatterCommand.cs(50,84,50,92): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
159>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleAutomaticFormatter\CS\ScheduleFormatterCommand.cs(50,16,50,22): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
159>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleAutomaticFormatter\CS\ScheduleFormatterCommand.cs(89,38,89,50): error CS0246: The type or namespace name 'ViewSchedule' could not be found (are you missing a using directive or an assembly reference?)
159>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleAutomaticFormatter\CS\ScheduleFormatterCommand.cs(89,65,89,71): error CS0246: The type or namespace name 'Schema' could not be found (are you missing a using directive or an assembly reference?)
159>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleAutomaticFormatter\CS\ScheduleFormatterCommand.cs(107,24,107,30): error CS0246: The type or namespace name 'Schema' could not be found (are you missing a using directive or an assembly reference?)
161>------ Rebuild All started: Project: Site, Configuration: Debug Any CPU ------
161>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
161>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
161>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\Application.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\Application.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\Application.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\Application.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\Application.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteAddRetainingPondCommand.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteAddRetainingPondCommand.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteAddRetainingPondCommand.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteAddRetainingPondCommand.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteDeleteRegionAndPointsCommand.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteDeleteRegionAndPointsCommand.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteDeleteRegionAndPointsCommand.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteEditingUtils.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteEditingUtils.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteLowerTerrainInRegionCommand.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteMoveRegionAndPointsCommand.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteMoveRegionAndPointsCommand.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteMoveRegionAndPointsCommand.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteNormalizeTerrainInRegionCommand.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteNormalizeTerrainInRegionCommand.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteNormalizeTerrainInRegionCommand.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteRaiseTerrainInRegionCommand.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteUIUtils.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteUIUtils.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteUIUtils.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteUIUtils.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\TopographyEditFailuresPreprocessor.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\TopographyEditFailuresPreprocessor.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\Application.cs(44,32,44,52): error CS0246: The type or namespace name 'IExternalApplication' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteMoveRegionAndPointsCommand.cs(37,44,37,60): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteMoveRegionAndPointsCommand.cs(36,6,36,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteMoveRegionAndPointsCommand.cs(36,44,36,52): error CS0103: The name 'Autodesk' does not exist in the current context
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\Application.cs(42,6,42,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\Application.cs(43,6,43,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\Application.cs(42,44,42,52): error CS0103: The name 'Autodesk' does not exist in the current context
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\Application.cs(43,45,43,53): error CS0103: The name 'Autodesk' does not exist in the current context
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteMoveRegionAndPointsCommand.cs(48,31,48,50): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteMoveRegionAndPointsCommand.cs(48,84,48,92): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteMoveRegionAndPointsCommand.cs(48,16,48,22): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteMoveRegionAndPointsCommand.cs(60,45,60,55): error CS0246: The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\Application.cs(52,34,52,57): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\Application.cs(52,16,52,22): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteNormalizeTerrainInRegionCommand.cs(37,49,37,65): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\Application.cs(62,33,62,56): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\Application.cs(62,16,62,22): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\Application.cs(70,38,70,61): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\Application.cs(114,55,114,69): error CS0246: The type or namespace name 'PushButtonData' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteNormalizeTerrainInRegionCommand.cs(36,6,36,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteNormalizeTerrainInRegionCommand.cs(36,44,36,52): error CS0103: The name 'Autodesk' does not exist in the current context
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteNormalizeTerrainInRegionCommand.cs(48,31,48,50): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteNormalizeTerrainInRegionCommand.cs(48,84,48,92): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteNormalizeTerrainInRegionCommand.cs(48,16,48,22): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteNormalizeTerrainInRegionCommand.cs(61,50,61,60): error CS0246: The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteRaiseTerrainInRegionCommand.cs(35,45,35,61): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteRaiseTerrainInRegionCommand.cs(34,6,34,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteRaiseTerrainInRegionCommand.cs(34,44,34,52): error CS0103: The name 'Autodesk' does not exist in the current context
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteRaiseTerrainInRegionCommand.cs(46,31,46,50): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteRaiseTerrainInRegionCommand.cs(46,84,46,92): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteRaiseTerrainInRegionCommand.cs(46,16,46,22): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteUIUtils.cs(44,62,44,72): error CS0246: The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteUIUtils.cs(83,55,83,65): error CS0246: The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteUIUtils.cs(83,23,83,40): error CS0246: The type or namespace name 'TopographySurface' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteUIUtils.cs(98,63,98,73): error CS0246: The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteUIUtils.cs(98,23,98,40): error CS0246: The type or namespace name 'TopographySurface' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteUIUtils.cs(115,52,115,62): error CS0246: The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteUIUtils.cs(115,70,115,87): error CS0246: The type or namespace name 'TopographySurface' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteUIUtils.cs(115,23,115,26): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteUIUtils.cs(135,42,135,58): error CS0246: The type or namespace name 'ISelectionFilter' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteUIUtils.cs(142,38,142,45): error CS0246: The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteUIUtils.cs(155,40,155,49): error CS0246: The type or namespace name 'Reference' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteUIUtils.cs(155,57,155,60): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteUIUtils.cs(164,50,164,66): error CS0246: The type or namespace name 'ISelectionFilter' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteUIUtils.cs(171,38,171,45): error CS0246: The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteUIUtils.cs(184,40,184,49): error CS0246: The type or namespace name 'Reference' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteUIUtils.cs(184,57,184,60): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\TopographyEditFailuresPreprocessor.cs(32,48,32,69): error CS0246: The type or namespace name 'IFailuresPreprocessor' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\TopographyEditFailuresPreprocessor.cs(34,59,34,75): error CS0246: The type or namespace name 'FailuresAccessor' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\TopographyEditFailuresPreprocessor.cs(34,16,34,39): error CS0246: The type or namespace name 'FailureProcessingResult' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\TopographyEditFailuresPreprocessor.cs(41,55,41,76): error CS0246: The type or namespace name 'IFailuresPreprocessor' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\TopographyEditFailuresPreprocessor.cs(44,59,44,75): error CS0246: The type or namespace name 'FailuresAccessor' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\TopographyEditFailuresPreprocessor.cs(44,16,44,39): error CS0246: The type or namespace name 'FailureProcessingResult' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteAddRetainingPondCommand.cs(40,41,40,57): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteAddRetainingPondCommand.cs(39,6,39,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteAddRetainingPondCommand.cs(39,44,39,52): error CS0103: The name 'Autodesk' does not exist in the current context
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteAddRetainingPondCommand.cs(51,31,51,50): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteAddRetainingPondCommand.cs(51,84,51,92): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteAddRetainingPondCommand.cs(51,16,51,22): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteAddRetainingPondCommand.cs(63,42,63,52): error CS0246: The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteDeleteRegionAndPointsCommand.cs(37,45,37,61): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteDeleteRegionAndPointsCommand.cs(36,6,36,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteDeleteRegionAndPointsCommand.cs(36,44,36,52): error CS0103: The name 'Autodesk' does not exist in the current context
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteDeleteRegionAndPointsCommand.cs(47,31,47,50): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteDeleteRegionAndPointsCommand.cs(47,84,47,92): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteDeleteRegionAndPointsCommand.cs(47,16,47,22): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteDeleteRegionAndPointsCommand.cs(58,46,58,56): error CS0246: The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteEditingUtils.cs(43,46,43,49): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteEditingUtils.cs(43,23,43,26): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteEditingUtils.cs(53,56,53,59): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteEditingUtils.cs(68,64,68,67): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteEditingUtils.cs(68,29,68,32): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteEditingUtils.cs(90,61,90,64): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteEditingUtils.cs(90,74,90,77): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteEditingUtils.cs(104,39,104,46): error CS0246: The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteEditingUtils.cs(104,23,104,26): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteEditingUtils.cs(116,62,116,79): error CS0246: The type or namespace name 'TopographySurface' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteEditingUtils.cs(116,29,116,32): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteEditingUtils.cs(134,62,134,79): error CS0246: The type or namespace name 'TopographySurface' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteEditingUtils.cs(134,29,134,32): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteEditingUtils.cs(144,66,144,83): error CS0246: The type or namespace name 'TopographySurface' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteEditingUtils.cs(144,23,144,40): error CS0246: The type or namespace name 'TopographySurface' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteEditingUtils.cs(155,55,155,72): error CS0246: The type or namespace name 'TopographySurface' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteEditingUtils.cs(155,29,155,32): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteLowerTerrainInRegionCommand.cs(35,45,35,61): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteLowerTerrainInRegionCommand.cs(34,6,34,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteLowerTerrainInRegionCommand.cs(34,44,34,52): error CS0103: The name 'Autodesk' does not exist in the current context
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteLowerTerrainInRegionCommand.cs(46,31,46,50): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteLowerTerrainInRegionCommand.cs(46,84,46,92): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
161>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Site\CS\SiteLowerTerrainInRegionCommand.cs(46,16,46,22): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
162>------ Rebuild All started: Project: DuplicateViews, Configuration: Debug Any CPU ------
160>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
160>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
160>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
160>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleToHTML\CS\Application.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
160>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleToHTML\CS\Application.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
160>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleToHTML\CS\Application.cs(34,7,34,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
160>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleToHTML\CS\Application.cs(35,7,35,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
160>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleToHTML\CS\Application.cs(36,7,36,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
160>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleToHTML\CS\ScheduleHTMLExportCommand.cs(1,7,1,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
160>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleToHTML\CS\ScheduleHTMLExportCommand.cs(2,7,2,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
160>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleToHTML\CS\ScheduleHTMLExporter.cs(5,7,5,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
160>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleToHTML\CS\Application.cs(45,32,45,52): error CS0246: The type or namespace name 'IExternalApplication' could not be found (are you missing a using directive or an assembly reference?)
160>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleToHTML\CS\Application.cs(43,6,43,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
160>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleToHTML\CS\Application.cs(44,6,44,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
160>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleToHTML\CS\Application.cs(43,44,43,52): error CS0103: The name 'Autodesk' does not exist in the current context
160>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleToHTML\CS\Application.cs(44,45,44,53): error CS0103: The name 'Autodesk' does not exist in the current context
160>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleToHTML\CS\Application.cs(53,34,53,57): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
160>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleToHTML\CS\Application.cs(53,16,53,22): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
160>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleToHTML\CS\Application.cs(63,33,63,56): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
160>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleToHTML\CS\Application.cs(63,16,63,22): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
160>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleToHTML\CS\Application.cs(75,48,75,71): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
160>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleToHTML\CS\Application.cs(94,51,94,61): error CS0246: The type or namespace name 'PushButton' could not be found (are you missing a using directive or an assembly reference?)
160>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleToHTML\CS\ScheduleHTMLExportCommand.cs(10,39,10,55): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
160>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleToHTML\CS\ScheduleHTMLExportCommand.cs(9,6,9,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
160>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleToHTML\CS\ScheduleHTMLExportCommand.cs(9,44,9,52): error CS0103: The name 'Autodesk' does not exist in the current context
160>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleToHTML\CS\ScheduleHTMLExportCommand.cs(21,31,21,50): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
160>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleToHTML\CS\ScheduleHTMLExportCommand.cs(21,84,21,92): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
160>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleToHTML\CS\ScheduleHTMLExportCommand.cs(21,16,21,22): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
160>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleToHTML\CS\ScheduleHTMLExporter.cs(131,50,131,55): error CS0246: The type or namespace name 'Color' could not be found (are you missing a using directive or an assembly reference?)
160>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleToHTML\CS\ScheduleHTMLExporter.cs(139,24,139,29): error CS0246: The type or namespace name 'Color' could not be found (are you missing a using directive or an assembly reference?)
160>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleToHTML\CS\ScheduleHTMLExporter.cs(150,24,150,29): error CS0246: The type or namespace name 'Color' could not be found (are you missing a using directive or an assembly reference?)
160>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleToHTML\CS\ScheduleHTMLExporter.cs(164,34,164,39): error CS0246: The type or namespace name 'Color' could not be found (are you missing a using directive or an assembly reference?)
160>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleToHTML\CS\ScheduleHTMLExporter.cs(164,48,164,53): error CS0246: The type or namespace name 'Color' could not be found (are you missing a using directive or an assembly reference?)
160>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleToHTML\CS\ScheduleHTMLExporter.cs(174,46,174,70): error CS0246: The type or namespace name 'HorizontalAlignmentStyle' could not be found (are you missing a using directive or an assembly reference?)
160>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleToHTML\CS\ScheduleHTMLExporter.cs(216,38,216,49): error CS0246: The type or namespace name 'SectionType' could not be found (are you missing a using directive or an assembly reference?)
160>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleToHTML\CS\ScheduleHTMLExporter.cs(216,59,216,75): error CS0246: The type or namespace name 'TableSectionData' could not be found (are you missing a using directive or an assembly reference?)
160>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleToHTML\CS\ScheduleHTMLExporter.cs(18,37,18,49): error CS0246: The type or namespace name 'ViewSchedule' could not be found (are you missing a using directive or an assembly reference?)
160>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleToHTML\CS\ScheduleHTMLExporter.cs(341,17,341,29): error CS0246: The type or namespace name 'ViewSchedule' could not be found (are you missing a using directive or an assembly reference?)
160>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleToHTML\CS\ScheduleHTMLExporter.cs(346,17,346,33): error CS0246: The type or namespace name 'TableSectionData' could not be found (are you missing a using directive or an assembly reference?)
160>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ScheduleToHTML\CS\ScheduleHTMLExporter.cs(351,17,351,33): error CS0246: The type or namespace name 'TableSectionData' could not be found (are you missing a using directive or an assembly reference?)
163>------ Rebuild All started: Project: ExtensibleStorageUtility, Configuration: Debug Any CPU ------
163>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
163>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
163>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
163>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageUtility\CS\DeleteStorage.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
163>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageUtility\CS\DeleteStorage.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
163>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageUtility\CS\DeleteStorage.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
163>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageUtility\CS\QueryStorage.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
163>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageUtility\CS\QueryStorage.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
163>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageUtility\CS\QueryStorage.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
163>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageUtility\CS\Utility.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
163>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageUtility\CS\Utility.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
163>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageUtility\CS\Utility.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
163>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageUtility\CS\DeleteStorage.cs(41,33,41,49): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
163>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageUtility\CS\DeleteStorage.cs(39,5,39,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
163>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageUtility\CS\DeleteStorage.cs(40,5,40,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
163>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageUtility\CS\DeleteStorage.cs(39,43,39,51): error CS0103: The name 'Autodesk' does not exist in the current context
163>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageUtility\CS\DeleteStorage.cs(40,44,40,52): error CS0103: The name 'Autodesk' does not exist in the current context
163>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageUtility\CS\DeleteStorage.cs(43,29,43,48): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
163>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageUtility\CS\DeleteStorage.cs(43,82,43,92): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
163>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageUtility\CS\DeleteStorage.cs(43,14,43,20): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
163>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageUtility\CS\QueryStorage.cs(43,31,43,47): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
163>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageUtility\CS\QueryStorage.cs(41,5,41,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
163>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageUtility\CS\QueryStorage.cs(42,5,42,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
163>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageUtility\CS\QueryStorage.cs(41,43,41,51): error CS0103: The name 'Autodesk' does not exist in the current context
163>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageUtility\CS\QueryStorage.cs(42,44,42,52): error CS0103: The name 'Autodesk' does not exist in the current context
163>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageUtility\CS\QueryStorage.cs(45,29,45,48): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
163>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageUtility\CS\QueryStorage.cs(45,82,45,92): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
163>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageUtility\CS\QueryStorage.cs(45,14,45,20): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
163>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageUtility\CS\Utility.cs(41,46,41,54): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
163>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageUtility\CS\Utility.cs(63,54,63,62): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
163>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageUtility\CS\Utility.cs(83,51,83,59): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
163>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageUtility\CS\Utility.cs(83,65,83,71): error CS0246: The type or namespace name 'Schema' could not be found (are you missing a using directive or an assembly reference?)
163>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageUtility\CS\Utility.cs(104,58,104,66): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
163>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageUtility\CS\Utility.cs(104,72,104,78): error CS0246: The type or namespace name 'Schema' could not be found (are you missing a using directive or an assembly reference?)
163>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageUtility\CS\Utility.cs(104,27,104,36): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
163>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageUtility\CS\Utility.cs(116,46,116,55): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
163>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExtensibleStorageUtility\CS\Utility.cs(116,60,116,68): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
164>------ Rebuild All started: Project: SinePlotter, Configuration: Debug Any CPU ------
162>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
162>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
162>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
162>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\Application.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
162>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\Application.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
162>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\Application.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
162>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\Application.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
162>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\Application.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
162>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\DuplicateAcrossDocumentsCommand.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
162>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\DuplicateAcrossDocumentsCommand.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
162>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\DuplicateAcrossDocumentsCommand.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
162>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\DuplicateViewUtils.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
162>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\DuplicateViewUtils.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
162>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\Application.cs(44,32,44,52): error CS0246: The type or namespace name 'IExternalApplication' could not be found (are you missing a using directive or an assembly reference?)
162>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\Application.cs(42,6,42,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
162>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\Application.cs(43,6,43,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
162>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\Application.cs(42,44,42,52): error CS0103: The name 'Autodesk' does not exist in the current context
162>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\Application.cs(43,45,43,53): error CS0103: The name 'Autodesk' does not exist in the current context
162>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\Application.cs(52,34,52,57): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
162>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\Application.cs(52,16,52,22): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
162>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\Application.cs(62,33,62,56): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
162>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\Application.cs(62,16,62,22): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
162>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\Application.cs(71,43,71,66): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
162>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\Application.cs(91,51,91,61): error CS0246: The type or namespace name 'PushButton' could not be found (are you missing a using directive or an assembly reference?)
162>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\DuplicateAcrossDocumentsCommand.cs(37,45,37,61): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
162>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\DuplicateAcrossDocumentsCommand.cs(36,6,36,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
162>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\DuplicateAcrossDocumentsCommand.cs(36,44,36,52): error CS0103: The name 'Autodesk' does not exist in the current context
162>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\DuplicateAcrossDocumentsCommand.cs(48,31,48,50): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
162>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\DuplicateAcrossDocumentsCommand.cs(48,84,48,92): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
162>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\DuplicateAcrossDocumentsCommand.cs(48,16,48,22): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
162>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\DuplicateViewUtils.cs(43,47,43,55): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
162>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\DuplicateViewUtils.cs(44,65,44,77): error CS0246: The type or namespace name 'ViewSchedule' could not be found (are you missing a using directive or an assembly reference?)
162>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\DuplicateViewUtils.cs(45,53,45,61): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
162>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\DuplicateViewUtils.cs(62,50,62,58): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
162>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\DuplicateViewUtils.cs(63,65,63,77): error CS0246: The type or namespace name 'ViewDrafting' could not be found (are you missing a using directive or an assembly reference?)
162>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\DuplicateViewUtils.cs(64,53,64,61): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
162>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\DuplicateViewUtils.cs(106,90,106,98): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
162>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\DuplicateViewUtils.cs(107,64,107,73): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
162>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\DuplicateViewUtils.cs(108,52,108,60): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
162>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\DuplicateViewUtils.cs(106,35,106,44): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
162>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\DuplicateViewUtils.cs(106,46,106,55): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
162>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\DuplicateViewUtils.cs(181,58,181,62): error CS0246: The type or namespace name 'View' could not be found (are you missing a using directive or an assembly reference?)
162>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\DuplicateViewUtils.cs(182,57,182,61): error CS0246: The type or namespace name 'View' could not be found (are you missing a using directive or an assembly reference?)
162>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\DuplicateViewUtils.cs(227,57,227,61): error CS0246: The type or namespace name 'View' could not be found (are you missing a using directive or an assembly reference?)
162>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\DuplicateViewUtils.cs(227,24,227,33): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
162>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\DuplicateViewUtils.cs(237,52,237,78): error CS0246: The type or namespace name 'IDuplicateTypeNamesHandler' could not be found (are you missing a using directive or an assembly reference?)
162>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\DuplicateViewUtils.cs(246,62,246,91): error CS0246: The type or namespace name 'DuplicateTypeNamesHandlerArgs' could not be found (are you missing a using directive or an assembly reference?)
162>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\DuplicateViewUtils.cs(246,16,246,35): error CS0246: The type or namespace name 'DuplicateTypeAction' could not be found (are you missing a using directive or an assembly reference?)
162>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\DuplicateViewUtils.cs(258,49,258,70): error CS0246: The type or namespace name 'IFailuresPreprocessor' could not be found (are you missing a using directive or an assembly reference?)
162>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\DuplicateViewUtils.cs(267,59,267,75): error CS0246: The type or namespace name 'FailuresAccessor' could not be found (are you missing a using directive or an assembly reference?)
162>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateViews\CS\DuplicateViewUtils.cs(267,16,267,39): error CS0246: The type or namespace name 'FailureProcessingResult' could not be found (are you missing a using directive or an assembly reference?)
165>------ Rebuild All started: Project: Units, Configuration: Debug Any CPU ------
164>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
164>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
164>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
164>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SinePlotter\CS\Application.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
164>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SinePlotter\CS\Application.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
164>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SinePlotter\CS\Application.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
164>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SinePlotter\CS\Command.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
164>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SinePlotter\CS\Command.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
164>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SinePlotter\CS\Command.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
164>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SinePlotter\CS\Command.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
164>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SinePlotter\CS\FamilyInstancePlotter.cs(24,7,24,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
164>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SinePlotter\CS\FamilyInstancePlotter.cs(25,7,25,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
164>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SinePlotter\CS\FamilyInstancePlotter.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
164>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SinePlotter\CS\FamilyInstancePlotter.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
164>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SinePlotter\CS\FamilyInstancePlotter.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
164>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SinePlotter\CS\Application.cs(41,32,41,52): error CS0246: The type or namespace name 'IExternalApplication' could not be found (are you missing a using directive or an assembly reference?)
164>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SinePlotter\CS\Application.cs(39,6,39,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
164>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SinePlotter\CS\Application.cs(40,6,40,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
164>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SinePlotter\CS\Application.cs(39,44,39,52): error CS0103: The name 'Autodesk' does not exist in the current context
164>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SinePlotter\CS\Application.cs(40,45,40,53): error CS0103: The name 'Autodesk' does not exist in the current context
164>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SinePlotter\CS\Application.cs(65,34,65,57): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
164>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SinePlotter\CS\Application.cs(65,16,65,22): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
164>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SinePlotter\CS\Application.cs(76,33,76,56): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
164>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SinePlotter\CS\Application.cs(76,16,76,22): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
164>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SinePlotter\CS\Application.cs(159,39,159,50): error CS0246: The type or namespace name 'RibbonPanel' could not be found (are you missing a using directive or an assembly reference?)
164>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SinePlotter\CS\Application.cs(187,51,187,62): error CS0246: The type or namespace name 'RibbonPanel' could not be found (are you missing a using directive or an assembly reference?)
164>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SinePlotter\CS\Application.cs(229,45,229,56): error CS0246: The type or namespace name 'RibbonPanel' could not be found (are you missing a using directive or an assembly reference?)
164>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SinePlotter\CS\Application.cs(248,35,248,46): error CS0246: The type or namespace name 'RibbonPanel' could not be found (are you missing a using directive or an assembly reference?)
164>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SinePlotter\CS\Application.cs(257,39,257,50): error CS0246: The type or namespace name 'RibbonPanel' could not be found (are you missing a using directive or an assembly reference?)
164>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SinePlotter\CS\Application.cs(257,58,257,65): error CS0246: The type or namespace name 'TextBox' could not be found (are you missing a using directive or an assembly reference?)
164>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SinePlotter\CS\Application.cs(281,57,281,85): error CS0246: The type or namespace name 'TextBoxEnterPressedEventArgs' could not be found (are you missing a using directive or an assembly reference?)
164>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SinePlotter\CS\Application.cs(51,24,51,32): error CS0246: The type or namespace name 'ComboBox' could not be found (are you missing a using directive or an assembly reference?)
164>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SinePlotter\CS\Application.cs(53,17,53,24): error CS0246: The type or namespace name 'TextBox' could not be found (are you missing a using directive or an assembly reference?)
164>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SinePlotter\CS\Application.cs(54,17,54,24): error CS0246: The type or namespace name 'TextBox' could not be found (are you missing a using directive or an assembly reference?)
164>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SinePlotter\CS\Application.cs(55,17,55,24): error CS0246: The type or namespace name 'TextBox' could not be found (are you missing a using directive or an assembly reference?)
164>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SinePlotter\CS\Application.cs(56,17,56,24): error CS0246: The type or namespace name 'TextBox' could not be found (are you missing a using directive or an assembly reference?)
164>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SinePlotter\CS\Command.cs(39,28,39,44): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
164>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SinePlotter\CS\Command.cs(37,6,37,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
164>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SinePlotter\CS\Command.cs(38,6,38,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
164>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SinePlotter\CS\Command.cs(37,44,37,52): error CS0103: The name 'Autodesk' does not exist in the current context
164>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SinePlotter\CS\Command.cs(38,45,38,53): error CS0103: The name 'Autodesk' does not exist in the current context
164>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SinePlotter\CS\Command.cs(57,39,57,58): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
164>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SinePlotter\CS\Command.cs(58,35,58,45): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
164>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SinePlotter\CS\Command.cs(57,24,57,30): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
164>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SinePlotter\CS\FamilyInstancePlotter.cs(57,38,57,41): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
164>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SinePlotter\CS\FamilyInstancePlotter.cs(46,38,46,50): error CS0246: The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)
164>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SinePlotter\CS\FamilyInstancePlotter.cs(46,55,46,63): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
164>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SinePlotter\CS\FamilyInstancePlotter.cs(37,17,37,29): error CS0246: The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)
164>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SinePlotter\CS\FamilyInstancePlotter.cs(38,17,38,25): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
166>------ Rebuild All started: Project: UIAPI, Configuration: Debug Any CPU ------
165>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
165>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
165>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
165>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Units\CS\Command.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
165>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Units\CS\Command.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
165>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Units\CS\Command.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
165>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Units\CS\FormatForm.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
165>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Units\CS\UnitsForm.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
165>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Units\CS\Command.cs(41,28,41,44): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
165>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Units\CS\Command.cs(38,6,38,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
165>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Units\CS\Command.cs(39,6,39,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
165>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Units\CS\Command.cs(40,6,40,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
165>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Units\CS\Command.cs(38,44,38,52): error CS0103: The name 'Autodesk' does not exist in the current context
165>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Units\CS\Command.cs(39,45,39,53): error CS0103: The name 'Autodesk' does not exist in the current context
165>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Units\CS\Command.cs(40,43,40,51): error CS0103: The name 'Autodesk' does not exist in the current context
165>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Units\CS\Command.cs(59,39,59,58): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
165>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Units\CS\Command.cs(60,35,60,45): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
165>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Units\CS\Command.cs(59,24,59,30): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
165>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Units\CS\FormatForm.cs(48,16,48,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
165>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Units\CS\FormatForm.cs(60,27,60,35): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
165>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Units\CS\FormatForm.cs(60,69,60,77): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
165>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Units\CS\FormatForm.cs(42,17,42,25): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
165>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Units\CS\FormatForm.cs(43,17,43,25): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
165>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Units\CS\UnitsForm.cs(48,26,48,34): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
165>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\Units\CS\UnitsForm.cs(42,16,42,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
167>------ Rebuild All started: Project: WinderStairs, Configuration: Debug Any CPU ------
167>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
167>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
167>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Command.cs(25,7,25,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Command.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Command.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderSinglePoint.cs(25,7,25,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderStraight.cs(24,7,24,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderCorner.cs(24,7,24,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\WinderUpdater.cs(25,7,25,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\WinderUpdater.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\WinderUpdater.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\LWinder.cs(24,7,24,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderUtil.cs(25,7,25,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\UWinder.cs(24,7,24,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Forms\UWinderOptions.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\Winder.cs(25,7,25,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\Winder.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Forms\LWinderOptions.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Command.cs(39,28,39,44): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Command.cs(36,6,36,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Command.cs(37,6,37,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Command.cs(38,6,38,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Command.cs(36,44,36,52): error CS0103: The name 'Autodesk' does not exist in the current context
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Command.cs(37,45,37,53): error CS0103: The name 'Autodesk' does not exist in the current context
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Command.cs(38,43,38,51): error CS0103: The name 'Autodesk' does not exist in the current context
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Command.cs(57,39,57,58): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Command.cs(57,92,57,102): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Command.cs(57,24,57,30): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Command.cs(157,36,157,44): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderSinglePoint.cs(48,16,48,19): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderCorner.cs(120,19,120,24): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderCorner.cs(120,47,120,52): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderCorner.cs(121,19,121,24): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderCorner.cs(121,47,121,52): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderSinglePoint.cs(103,19,103,24): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderSinglePoint.cs(103,47,103,52): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderSinglePoint.cs(104,19,104,24): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderSinglePoint.cs(104,47,104,52): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderCorner.cs(104,34,104,37): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderSinglePoint.cs(232,35,232,38): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderSinglePoint.cs(57,34,57,37): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderSinglePoint.cs(57,49,57,52): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderSinglePoint.cs(57,59,57,62): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderStraight.cs(47,16,47,19): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderStraight.cs(52,16,52,19): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderStraight.cs(57,16,57,19): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderStraight.cs(83,19,83,24): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderStraight.cs(83,47,83,52): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderStraight.cs(84,19,84,24): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderStraight.cs(84,47,84,52): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderStraight.cs(71,31,71,34): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderStraight.cs(71,42,71,45): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderStraight.cs(71,51,71,54): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderCorner.cs(48,16,48,19): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderCorner.cs(53,16,53,19): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderCorner.cs(58,16,58,19): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderCorner.cs(78,16,78,19): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderCorner.cs(83,16,83,19): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderCorner.cs(92,32,92,35): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderCorner.cs(92,47,92,50): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderCorner.cs(92,57,92,60): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\WinderUpdater.cs(35,27,35,35): error CS0246: The type or namespace name 'IUpdater' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\WinderUpdater.cs(35,37,35,58): error CS0246: The type or namespace name 'IExternalEventHandler' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\WinderUpdater.cs(105,14,105,22): error CS0246: The type or namespace name 'IUpdater' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\WinderUpdater.cs(122,16,122,24): error CS0246: The type or namespace name 'IUpdater' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\WinderUpdater.cs(130,24,130,32): error CS0246: The type or namespace name 'IUpdater' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\WinderUpdater.cs(138,19,138,27): error CS0246: The type or namespace name 'IUpdater' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\WinderUpdater.cs(146,16,146,24): error CS0246: The type or namespace name 'IUpdater' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\WinderUpdater.cs(154,14,154,35): error CS0246: The type or namespace name 'IExternalEventHandler' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\WinderUpdater.cs(170,16,170,37): error CS0246: The type or namespace name 'IExternalEventHandler' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\WinderUpdater.cs(88,43,88,51): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\WinderUpdater.cs(53,51,53,60): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\WinderUpdater.cs(54,13,54,21): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\WinderUpdater.cs(54,30,54,37): error CS0246: The type or namespace name 'AddInId' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\WinderUpdater.cs(105,31,105,42): error CS0246: The type or namespace name 'UpdaterData' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\WinderUpdater.cs(105,14,105,22): error CS0538: 'IUpdater' in explicit interface declaration is not an interface
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\WinderUpdater.cs(122,16,122,24): error CS0538: 'IUpdater' in explicit interface declaration is not an interface
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\WinderUpdater.cs(130,9,130,23): error CS0246: The type or namespace name 'ChangePriority' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\WinderUpdater.cs(130,24,130,32): error CS0538: 'IUpdater' in explicit interface declaration is not an interface
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\WinderUpdater.cs(138,9,138,18): error CS0246: The type or namespace name 'UpdaterId' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\WinderUpdater.cs(138,19,138,27): error CS0538: 'IUpdater' in explicit interface declaration is not an interface
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\WinderUpdater.cs(146,16,146,24): error CS0538: 'IUpdater' in explicit interface declaration is not an interface
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\WinderUpdater.cs(154,44,154,57): error CS0246: The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\WinderUpdater.cs(154,14,154,35): error CS0538: 'IExternalEventHandler' in explicit interface declaration is not an interface
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\WinderUpdater.cs(170,16,170,37): error CS0538: 'IExternalEventHandler' in explicit interface declaration is not an interface
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\WinderUpdater.cs(37,17,37,26): error CS0246: The type or namespace name 'UpdaterId' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\WinderUpdater.cs(38,23,38,32): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\WinderUpdater.cs(39,17,39,26): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\Winder.cs(38,30,38,33): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\LWinder.cs(62,31,62,34): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderUtil.cs(41,57,41,65): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderUtil.cs(41,80,41,89): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderUtil.cs(41,29,41,32): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderUtil.cs(90,64,90,67): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderUtil.cs(109,44,109,47): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderUtil.cs(134,49,134,52): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderUtil.cs(134,22,134,25): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderUtil.cs(183,51,183,59): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderUtil.cs(183,74,183,83): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderUtil.cs(183,22,183,25): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderUtil.cs(264,39,264,44): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderUtil.cs(264,51,264,56): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\WinderUtil.cs(264,67,264,70): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\UWinder.cs(82,31,82,34): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\Winder.cs(53,25,53,30): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\Winder.cs(58,25,58,30): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\Winder.cs(63,25,63,30): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\Winder.cs(68,25,68,30): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\Winder.cs(76,27,76,35): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\Winder.cs(76,65,76,74): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\Winder.cs(105,38,105,46): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\Winder.cs(105,59,105,68): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\Winder.cs(167,34,167,42): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\Winder.cs(209,49,209,70): error CS0246: The type or namespace name 'IFailuresPreprocessor' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\Winder.cs(211,59,211,75): error CS0246: The type or namespace name 'FailuresAccessor' could not be found (are you missing a using directive or an assembly reference?)
167>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\WinderStairs\CS\Winders\Winder.cs(211,16,211,39): error CS0246: The type or namespace name 'FailureProcessingResult' could not be found (are you missing a using directive or an assembly reference?)
168>------ Rebuild All started: Project: DockableDialogs, Configuration: Debug Any CPU ------
166>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
166>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
166>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
166>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\ApplicationAvailabilityClass.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
166>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\ApplicationAvailabilityClass.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
166>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\ApplicationOptions.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
166>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\ExternalApplication.cs(37,22,37,30): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
166>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\ExternalApplication.cs(35,7,35,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
166>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\ExternalApplication.cs(36,7,36,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
166>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\DragAndDrop\DragAndDrop.cs(34,7,34,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
166>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\DragAndDrop\DragAndDrop.cs(35,7,35,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
166>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\DragAndDrop\DragAndDropCommand.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
166>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\DragAndDrop\DragAndDropCommand.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
166>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\OptionsDialog\AddTabCommand.cs(31,22,31,30): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
166>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\OptionsDialog\AddTabCommand.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
166>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\OptionsDialog\AddTabCommand.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
166>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\OptionsDialog\UserControl1.xaml.cs(18,22,18,30): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
166>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\OptionsDialog\UserControl1.xaml.cs(16,7,16,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
166>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\OptionsDialog\UserControl1.xaml.cs(17,7,17,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
166>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\OptionsDialog\UserControl2.xaml.cs(17,22,17,30): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
166>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\OptionsDialog\UserControl2.xaml.cs(15,7,15,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
166>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\OptionsDialog\UserControl2.xaml.cs(16,7,16,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
166>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\OptionsDialog\UserControl3.xaml.cs(17,22,17,30): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
166>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\OptionsDialog\UserControl3.xaml.cs(15,7,15,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
166>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\OptionsDialog\UserControl3.xaml.cs(16,7,16,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
166>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\PreviewControl\PreviewCommand.cs(31,22,31,30): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
166>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\PreviewControl\PreviewCommand.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
166>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\PreviewControl\PreviewCommand.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
166>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\PreviewControl\PreviewModel.cs(13,22,13,30): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
166>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\PreviewControl\PreviewModel.cs(12,15,12,23): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
166>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\PreviewControl\PreviewModel.cs(10,7,10,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
166>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\PreviewControl\PreviewModel.cs(11,7,11,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
166>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\ApplicationAvailabilityClass.cs(34,42,34,70): error CS0246: The type or namespace name 'IExternalCommandAvailability' could not be found (are you missing a using directive or an assembly reference?)
166>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\ApplicationAvailabilityClass.cs(36,40,36,53): error CS0246: The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)
166>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\ApplicationAvailabilityClass.cs(37,37,37,45): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
166>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\ExternalApplication.cs(41,31,41,51): error CS0246: The type or namespace name 'IExternalApplication' could not be found (are you missing a using directive or an assembly reference?)
166>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\ExternalApplication.cs(51,35,51,58): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
166>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\ExternalApplication.cs(69,33,69,56): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
166>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\ExternalApplication.cs(142,34,142,57): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
166>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\ExternalApplication.cs(142,16,142,22): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
166>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\ExternalApplication.cs(158,33,158,56): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
166>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\ExternalApplication.cs(158,16,158,22): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
166>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\ExternalApplication.cs(172,16,172,39): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
166>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\ExternalApplication.cs(179,48,179,56): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
166>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\ExternalApplication.cs(184,46,184,54): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
166>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\ExternalApplication.cs(177,17,177,40): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
166>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\ExternalApplication.cs(245,32,245,48): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
166>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\ExternalApplication.cs(244,6,244,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
166>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\ExternalApplication.cs(244,44,244,52): error CS0103: The name 'Autodesk' does not exist in the current context
166>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\ExternalApplication.cs(248,31,248,50): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
166>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\ExternalApplication.cs(248,84,248,94): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
166>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\ExternalApplication.cs(248,16,248,22): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
166>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\DragAndDrop\DragAndDrop.cs(41,21,41,36): error CS0246: The type or namespace name 'BuiltInCategory' could not be found (are you missing a using directive or an assembly reference?)
166>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\DragAndDrop\DragAndDrop.cs(50,63,50,71): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
166>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\DragAndDrop\DragAndDrop.cs(85,46,85,54): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
166>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\DragAndDrop\DragAndDrop.cs(79,15,79,23): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
166>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\DragAndDrop\DragAndDrop.cs(188,43,188,55): error CS0246: The type or namespace name 'IDropHandler' could not be found (are you missing a using directive or an assembly reference?)
166>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\DragAndDrop\DragAndDrop.cs(190,28,190,38): error CS0246: The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)
166>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\DragAndDrop\DragAndDropCommand.cs(52,38,52,54): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
166>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\DragAndDrop\DragAndDropCommand.cs(51,5,51,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
166>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\DragAndDrop\DragAndDropCommand.cs(51,43,51,51): error CS0103: The name 'Autodesk' does not exist in the current context
166>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\DragAndDrop\DragAndDropCommand.cs(54,29,54,48): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
166>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\DragAndDrop\DragAndDropCommand.cs(54,82,54,92): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
166>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\DragAndDrop\DragAndDropCommand.cs(54,14,54,20): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
166>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\OptionsDialog\AddTabCommand.cs(50,58,50,66): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
166>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\OptionsDialog\AddTabCommand.cs(38,28,38,51): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
166>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\OptionsDialog\AddTabCommand.cs(86,15,86,38): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
166>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\PreviewControl\PreviewCommand.cs(53,34,53,50): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
166>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\PreviewControl\PreviewCommand.cs(52,5,52,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
166>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\PreviewControl\PreviewCommand.cs(52,43,52,51): error CS0103: The name 'Autodesk' does not exist in the current context
166>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\PreviewControl\PreviewCommand.cs(55,29,55,48): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
166>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\PreviewControl\PreviewCommand.cs(55,82,55,92): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
166>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\PreviewControl\PreviewCommand.cs(55,14,55,20): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
166>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\PreviewControl\PreviewCommand.cs(81,15,81,23): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
166>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\PreviewControl\PreviewModel.cs(30,38,30,47): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
166>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\PreviewControl\PreviewModel.cs(56,41,56,49): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
166>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\PreviewControl\PreviewModel.cs(19,55,19,64): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
166>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\PreviewControl\PreviewModel.cs(130,17,130,26): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
166>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\PreviewControl\PreviewModel.cs(131,17,131,25): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
166>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\PreviewControl\PreviewModel.cs(133,17,133,30): error CS0246: The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)
166>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\PreviewControl\PreviewModel.cs(215,16,215,25): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
166>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\PreviewControl\PreviewModel.cs(200,41,200,49): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
166>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\PreviewControl\PreviewModel.cs(244,16,244,24): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
166>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\UIAPI\CS\PreviewControl\PreviewModel.cs(223,44,223,52): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
169>------ Rebuild All started: Project: GetSetDefaultTypes, Configuration: Debug Any CPU ------
168>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
168>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
168>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
168>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\APIUtility\APIUtility.cs(42,7,42,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
168>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\APIUtility\APIUtility.cs(43,7,43,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
168>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\APIUtility\APIUtility.cs(46,7,46,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
168>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\APIUtility\APIUtility.cs(47,7,47,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
168>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\APIUtility\APIUtilityCommandParser.cs(42,7,42,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
168>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\APIUtility\APIUtilityCommandParser.cs(43,7,43,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
168>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\APIUtility\APIUtilityCommandParser.cs(46,7,46,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
168>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\APIUtility\APIUtilityCommandParser.cs(47,7,47,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
168>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\TopLevelCommands\ExternalCommandHidePage.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
168>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\TopLevelCommands\ExternalCommandHidePage.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
168>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\TopLevelCommands\ExternalCommandHidePage.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
168>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\TopLevelCommands\ExternalCommandRegisterPage.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
168>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\TopLevelCommands\ExternalCommandRegisterPage.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
168>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\TopLevelCommands\ExternalCommandRegisterPage.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
168>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\TopLevelCommands\ExternalCommandShowPage.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
168>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\TopLevelCommands\ExternalCommandShowPage.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
168>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\TopLevelCommands\ExternalCommandShowPage.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
168>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\Utility\Log.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
168>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\ExternalEvents\APIExternalEventHandler.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
168>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\ExternalEvents\APIExternalEventHandler.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
168>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\ExternalEvents\APIExternalEventHandler.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
168>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\ExternalEvents\APIExternalEventHandler.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
168>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\MainPage\MainPage.xaml.cs(42,7,42,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
168>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\Application\ThisApplication.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
168>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\Application\ThisApplication.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
168>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\Application\ThisApplication.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
168>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\Utility\Constants.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
168>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\APIUtility\APIUtility.cs(60,30,60,43): error CS0246: The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)
168>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\APIUtility\APIUtility.cs(92,36,92,50): error CS0246: The type or namespace name 'DockablePaneId' could not be found (are you missing a using directive or an assembly reference?)
168>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\APIUtility\APIUtility.cs(109,43,109,55): error CS0246: The type or namespace name 'DockablePane' could not be found (are you missing a using directive or an assembly reference?)
168>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\APIUtility\APIUtility.cs(119,49,119,66): error CS0246: The type or namespace name 'DockablePaneState' could not be found (are you missing a using directive or an assembly reference?)
168>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\APIUtility\APIUtility.cs(133,15,133,23): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
168>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\DockingSetupDialog\DockingSetupDialog.xaml.cs(170,14,170,22): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
168>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\DockingSetupDialog\DockingSetupDialog.xaml.cs(111,16,111,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
168>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\TopLevelCommands\ExternalCommandHidePage.cs(35,43,35,59): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
168>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\TopLevelCommands\ExternalCommandHidePage.cs(35,61,35,89): error CS0246: The type or namespace name 'IExternalCommandAvailability' could not be found (are you missing a using directive or an assembly reference?)
168>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\TopLevelCommands\ExternalCommandHidePage.cs(33,5,33,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
168>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\TopLevelCommands\ExternalCommandHidePage.cs(34,5,34,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
168>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\TopLevelCommands\ExternalCommandHidePage.cs(33,43,33,51): error CS0103: The name 'Autodesk' does not exist in the current context
168>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\TopLevelCommands\ExternalCommandHidePage.cs(34,44,34,52): error CS0103: The name 'Autodesk' does not exist in the current context
168>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\TopLevelCommands\ExternalCommandHidePage.cs(37,37,37,56): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
168>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\TopLevelCommands\ExternalCommandHidePage.cs(38,33,38,43): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
168>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\TopLevelCommands\ExternalCommandHidePage.cs(37,22,37,28): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
168>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\TopLevelCommands\ExternalCommandHidePage.cs(56,38,56,51): error CS0246: The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)
168>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\TopLevelCommands\ExternalCommandHidePage.cs(56,69,56,80): error CS0246: The type or namespace name 'CategorySet' could not be found (are you missing a using directive or an assembly reference?)
168>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\TopLevelCommands\ExternalCommandRegisterPage.cs(35,47,35,63): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
168>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\TopLevelCommands\ExternalCommandRegisterPage.cs(35,65,35,93): error CS0246: The type or namespace name 'IExternalCommandAvailability' could not be found (are you missing a using directive or an assembly reference?)
168>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\TopLevelCommands\ExternalCommandRegisterPage.cs(33,5,33,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
168>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\TopLevelCommands\ExternalCommandRegisterPage.cs(34,5,34,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
168>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\TopLevelCommands\ExternalCommandRegisterPage.cs(33,43,33,51): error CS0103: The name 'Autodesk' does not exist in the current context
168>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\TopLevelCommands\ExternalCommandRegisterPage.cs(34,44,34,52): error CS0103: The name 'Autodesk' does not exist in the current context
168>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\TopLevelCommands\ExternalCommandRegisterPage.cs(37,37,37,56): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
168>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\TopLevelCommands\ExternalCommandRegisterPage.cs(38,33,38,43): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
168>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\TopLevelCommands\ExternalCommandRegisterPage.cs(37,22,37,28): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
168>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\TopLevelCommands\ExternalCommandRegisterPage.cs(64,38,64,51): error CS0246: The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)
168>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\TopLevelCommands\ExternalCommandRegisterPage.cs(64,69,64,80): error CS0246: The type or namespace name 'CategorySet' could not be found (are you missing a using directive or an assembly reference?)
168>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\TopLevelCommands\ExternalCommandShowPage.cs(35,43,35,59): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
168>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\TopLevelCommands\ExternalCommandShowPage.cs(35,61,35,89): error CS0246: The type or namespace name 'IExternalCommandAvailability' could not be found (are you missing a using directive or an assembly reference?)
168>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\TopLevelCommands\ExternalCommandShowPage.cs(33,5,33,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
168>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\TopLevelCommands\ExternalCommandShowPage.cs(34,5,34,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
168>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\TopLevelCommands\ExternalCommandShowPage.cs(33,43,33,51): error CS0103: The name 'Autodesk' does not exist in the current context
168>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\TopLevelCommands\ExternalCommandShowPage.cs(34,44,34,52): error CS0103: The name 'Autodesk' does not exist in the current context
168>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\TopLevelCommands\ExternalCommandShowPage.cs(37,37,37,56): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
168>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\TopLevelCommands\ExternalCommandShowPage.cs(38,33,38,43): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
168>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\TopLevelCommands\ExternalCommandShowPage.cs(37,22,37,28): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
168>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\TopLevelCommands\ExternalCommandShowPage.cs(56,38,56,51): error CS0246: The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)
168>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\TopLevelCommands\ExternalCommandShowPage.cs(56,69,56,80): error CS0246: The type or namespace name 'CategorySet' could not be found (are you missing a using directive or an assembly reference?)
168>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\ExternalEvents\APIExternalEventHandler.cs(37,36,37,57): error CS0246: The type or namespace name 'IExternalEventHandler' could not be found (are you missing a using directive or an assembly reference?)
168>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\ExternalEvents\APIExternalEventHandler.cs(42,27,42,40): error CS0246: The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)
168>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\MainPage\MainPage.xaml.cs(48,42,48,50): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
168>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\MainPage\MainPage.xaml.cs(57,7,57,20): error CS0246: The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)
168>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\MainPage\MainPage.xaml.cs(143,39,143,47): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
168>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\MainPage\MainPage.xaml.cs(202,90,202,102): error CS0246: The type or namespace name 'DockPosition' could not be found (are you missing a using directive or an assembly reference?)
168>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\MainPage\MainPage.xaml.cs(131,17,131,25): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
168>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\MainPage\MainPage.xaml.cs(132,18,132,26): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
168>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\MainPage\MainPage.xaml.cs(214,16,214,28): error CS0246: The type or namespace name 'DockPosition' could not be found (are you missing a using directive or an assembly reference?)
168>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\Application\ThisApplication.cs(43,36,43,56): error CS0246: The type or namespace name 'IExternalApplication' could not be found (are you missing a using directive or an assembly reference?)
168>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\Application\ThisApplication.cs(41,6,41,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
168>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\Application\ThisApplication.cs(42,6,42,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
168>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\Application\ThisApplication.cs(41,44,41,52): error CS0103: The name 'Autodesk' does not exist in the current context
168>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\Application\ThisApplication.cs(42,45,42,53): error CS0103: The name 'Autodesk' does not exist in the current context
168>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\Application\ThisApplication.cs(49,33,49,56): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
168>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\Application\ThisApplication.cs(49,15,49,21): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
168>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\Application\ThisApplication.cs(57,43,57,56): error CS0246: The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)
168>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\Application\ThisApplication.cs(66,43,66,66): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
168>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\Application\ThisApplication.cs(75,32,75,55): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
168>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\Application\ThisApplication.cs(75,15,75,21): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
168>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\Application\ThisApplication.cs(117,40,117,48): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
168>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\Application\ThisApplication.cs(159,15,159,23): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
168>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DockableDialogs\CS\Utility\Constants.cs(44,23,44,37): error CS0246: The type or namespace name 'DockablePaneId' could not be found (are you missing a using directive or an assembly reference?)
170>------ Rebuild All started: Project: ReadonlySharedParameters, Configuration: Debug Any CPU ------
170>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
170>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
170>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
170>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParameterApplicaton.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
170>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParametersCommands.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
170>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParametersCommands.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
170>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParametersCommands.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
170>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\SharedParameterBindingManager.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
170>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\SharedParameterBindingManager.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
170>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParameterApplicaton.cs(32,55,32,75): error CS0246: The type or namespace name 'IExternalApplication' could not be found (are you missing a using directive or an assembly reference?)
170>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParameterApplicaton.cs(36,16,36,36): error CS0246: The type or namespace name 'IExternalApplication' could not be found (are you missing a using directive or an assembly reference?)
170>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParameterApplicaton.cs(41,16,41,36): error CS0246: The type or namespace name 'IExternalApplication' could not be found (are you missing a using directive or an assembly reference?)
170>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParameterApplicaton.cs(36,48,36,71): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
170>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParameterApplicaton.cs(36,9,36,15): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
170>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParameterApplicaton.cs(36,16,36,36): error CS0538: 'IExternalApplication' in explicit interface declaration is not an interface
170>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParameterApplicaton.cs(41,47,41,70): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
170>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParameterApplicaton.cs(41,9,41,15): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
170>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParameterApplicaton.cs(41,16,41,36): error CS0538: 'IExternalApplication' in explicit interface declaration is not an interface
170>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParametersCommands.cs(36,30,36,46): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
170>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParametersCommands.cs(35,6,35,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
170>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParametersCommands.cs(35,44,35,52): error CS0103: The name 'Autodesk' does not exist in the current context
170>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParametersCommands.cs(40,31,40,50): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
170>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParametersCommands.cs(40,84,40,92): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
170>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParametersCommands.cs(40,16,40,22): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
170>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParametersCommands.cs(53,30,53,46): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
170>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParametersCommands.cs(52,6,52,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
170>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParametersCommands.cs(52,44,52,52): error CS0103: The name 'Autodesk' does not exist in the current context
170>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParametersCommands.cs(57,31,57,50): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
170>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParametersCommands.cs(57,84,57,92): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
170>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParametersCommands.cs(57,16,57,22): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
170>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParametersCommands.cs(72,46,72,54): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
170>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParametersCommands.cs(77,46,77,54): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
170>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParametersCommands.cs(82,53,82,60): error CS0246: The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)
170>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParametersCommands.cs(88,61,88,68): error CS0246: The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)
170>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParametersCommands.cs(93,46,93,54): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
170>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParametersCommands.cs(93,65,93,72): error CS0246: The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)
170>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParametersCommands.cs(123,28,123,44): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
170>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParametersCommands.cs(122,6,122,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
170>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParametersCommands.cs(122,44,122,52): error CS0103: The name 'Autodesk' does not exist in the current context
170>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParametersCommands.cs(127,31,127,50): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
170>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParametersCommands.cs(127,84,127,92): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
170>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParametersCommands.cs(127,16,127,22): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
170>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParametersCommands.cs(140,28,140,44): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
170>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParametersCommands.cs(139,6,139,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
170>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParametersCommands.cs(139,44,139,52): error CS0103: The name 'Autodesk' does not exist in the current context
170>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParametersCommands.cs(144,31,144,50): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
170>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParametersCommands.cs(144,84,144,92): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
170>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParametersCommands.cs(144,16,144,22): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
170>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParametersCommands.cs(158,53,158,60): error CS0246: The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)
170>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParametersCommands.cs(163,58,163,65): error CS0246: The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)
170>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParametersCommands.cs(170,44,170,52): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
170>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParametersCommands.cs(175,44,175,52): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
170>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParametersCommands.cs(181,44,181,52): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
170>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParametersCommands.cs(181,63,181,70): error CS0246: The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)
170>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParametersCommands.cs(206,55,206,71): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
170>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParametersCommands.cs(205,6,205,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
170>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParametersCommands.cs(205,44,205,52): error CS0103: The name 'Autodesk' does not exist in the current context
170>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParametersCommands.cs(210,31,210,50): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
170>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParametersCommands.cs(210,84,210,92): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
170>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParametersCommands.cs(210,16,210,22): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
170>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\ReadonlySharedParametersCommands.cs(257,46,257,54): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
170>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\SharedParameterBindingManager.cs(37,11,37,24): error CS0246: The type or namespace name 'ParameterType' could not be found (are you missing a using directive or an assembly reference?)
170>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\SharedParameterBindingManager.cs(42,11,42,21): error CS0246: The type or namespace name 'Definition' could not be found (are you missing a using directive or an assembly reference?)
170>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\SharedParameterBindingManager.cs(43,11,43,32): error CS0246: The type or namespace name 'BuiltInParameterGroup' could not be found (are you missing a using directive or an assembly reference?)
170>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\SharedParameterBindingManager.cs(59,11,59,44): error CS0246: The type or namespace name 'ExternalDefinitionCreationOptions' could not be found (are you missing a using directive or an assembly reference?)
170>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\SharedParameterBindingManager.cs(68,28,68,43): error CS0246: The type or namespace name 'BuiltInCategory' could not be found (are you missing a using directive or an assembly reference?)
170>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\SharedParameterBindingManager.cs(73,38,73,46): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
170>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\SharedParameterBindingManager.cs(73,12,73,23): error CS0246: The type or namespace name 'CategorySet' could not be found (are you missing a using directive or an assembly reference?)
170>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\SharedParameterBindingManager.cs(87,28,87,36): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
170>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ReadonlySharedParameters\CS\SharedParameterBindingManager.cs(57,9,57,24): error CS0246: The type or namespace name 'BuiltInCategory' could not be found (are you missing a using directive or an assembly reference?)
171>------ Rebuild All started: Project: FamilyParametersOrder, Configuration: Debug Any CPU ------
169>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
169>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
169>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
169>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\ThisApplication.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
169>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\ThisApplication.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
169>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\ThisApplication.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
169>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\ThisApplication.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
169>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\ThisApplication.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
169>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\ThisApplication.cs(37,7,37,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
169>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\DefaultElementTypes.xaml.cs(35,7,35,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
169>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\DefaultElementTypes.xaml.cs(36,7,36,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
169>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\DefaultFamilyTypes.xaml.cs(36,7,36,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
169>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\DefaultFamilyTypes.xaml.cs(37,7,37,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
169>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\ThisCommand.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
169>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\ThisApplication.cs(47,35,47,55): error CS0246: The type or namespace name 'IExternalApplication' could not be found (are you missing a using directive or an assembly reference?)
169>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\ThisApplication.cs(51,32,51,55): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
169>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\ThisApplication.cs(51,14,51,20): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
169>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\ThisApplication.cs(56,31,56,54): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
169>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\ThisApplication.cs(56,14,56,20): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
169>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\ThisApplication.cs(94,53,94,61): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
169>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\DefaultElementTypes.xaml.cs(43,53,43,61): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
169>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\DefaultElementTypes.xaml.cs(126,31,126,39): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
169>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\DefaultElementTypes.xaml.cs(174,37,174,45): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
169>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\DefaultElementTypes.xaml.cs(45,21,45,35): error CS0246: The type or namespace name 'DockablePaneId' could not be found (are you missing a using directive or an assembly reference?)
169>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\DefaultElementTypes.xaml.cs(184,15,184,28): error CS0246: The type or namespace name 'ExternalEvent' could not be found (are you missing a using directive or an assembly reference?)
169>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\DefaultElementTypes.xaml.cs(186,15,186,23): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
169>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\DefaultElementTypes.xaml.cs(187,21,187,37): error CS0246: The type or namespace name 'ElementTypeGroup' could not be found (are you missing a using directive or an assembly reference?)
169>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\DefaultElementTypes.xaml.cs(231,14,231,30): error CS0246: The type or namespace name 'ElementTypeGroup' could not be found (are you missing a using directive or an assembly reference?)
169>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\DefaultElementTypes.xaml.cs(240,14,240,23): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
169>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\DefaultElementTypes.xaml.cs(288,52,288,73): error CS0246: The type or namespace name 'IExternalEventHandler' could not be found (are you missing a using directive or an assembly reference?)
169>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\DefaultElementTypes.xaml.cs(292,27,292,43): error CS0246: The type or namespace name 'ElementTypeGroup' could not be found (are you missing a using directive or an assembly reference?)
169>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\DefaultElementTypes.xaml.cs(292,62,292,71): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
169>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\DefaultElementTypes.xaml.cs(304,27,304,35): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
169>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\DefaultElementTypes.xaml.cs(290,7,290,23): error CS0246: The type or namespace name 'ElementTypeGroup' could not be found (are you missing a using directive or an assembly reference?)
169>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\DefaultElementTypes.xaml.cs(291,7,291,16): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
169>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\DefaultFamilyTypes.xaml.cs(44,52,44,60): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
169>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\DefaultFamilyTypes.xaml.cs(61,31,61,39): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
169>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\DefaultFamilyTypes.xaml.cs(109,48,109,56): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
169>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\DefaultFamilyTypes.xaml.cs(133,37,133,45): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
169>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\DefaultFamilyTypes.xaml.cs(46,21,46,35): error CS0246: The type or namespace name 'DockablePaneId' could not be found (are you missing a using directive or an assembly reference?)
169>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\DefaultFamilyTypes.xaml.cs(143,15,143,28): error CS0246: The type or namespace name 'ExternalEvent' could not be found (are you missing a using directive or an assembly reference?)
169>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\DefaultFamilyTypes.xaml.cs(145,15,145,23): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
169>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\DefaultFamilyTypes.xaml.cs(188,14,188,23): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
169>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\DefaultFamilyTypes.xaml.cs(197,14,197,23): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
169>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\DefaultFamilyTypes.xaml.cs(245,51,245,72): error CS0246: The type or namespace name 'IExternalEventHandler' could not be found (are you missing a using directive or an assembly reference?)
169>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\DefaultFamilyTypes.xaml.cs(249,27,249,36): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
169>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\DefaultFamilyTypes.xaml.cs(249,49,249,58): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
169>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\DefaultFamilyTypes.xaml.cs(261,27,261,35): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
169>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\DefaultFamilyTypes.xaml.cs(247,7,247,16): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
169>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\DefaultFamilyTypes.xaml.cs(248,7,248,16): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
169>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\ThisCommand.cs(32,24,32,40): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
169>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\ThisCommand.cs(31,5,31,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
169>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\ThisCommand.cs(31,43,31,51): error CS0103: The name 'Autodesk' does not exist in the current context
169>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\ThisCommand.cs(36,29,36,48): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
169>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\ThisCommand.cs(36,82,36,90): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
169>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GetSetDefaultTypes\CS\ThisCommand.cs(36,14,36,20): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
172>------ Rebuild All started: Project: ArchSample, Configuration: Debug Any CPU ------
171>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
171>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
171>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
171>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyParametersOrder\CS\Command.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
171>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyParametersOrder\CS\Command.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
171>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyParametersOrder\CS\Command.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
171>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyParametersOrder\CS\ExternalApplication.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
171>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyParametersOrder\CS\ExternalApplication.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
171>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyParametersOrder\CS\ExternalApplication.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
171>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyParametersOrder\CS\ExternalApplication.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
171>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyParametersOrder\CS\SortFamilyFilesParamsForm.cs(34,7,34,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
171>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyParametersOrder\CS\SortFamilyFilesParamsForm.cs(35,7,35,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
171>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyParametersOrder\CS\SortLoadedFamiliesParamsForm.cs(34,7,34,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
171>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyParametersOrder\CS\SortLoadedFamiliesParamsForm.cs(35,7,35,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
171>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyParametersOrder\CS\Command.cs(41,27,41,43): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
171>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyParametersOrder\CS\Command.cs(38,5,38,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
171>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyParametersOrder\CS\Command.cs(39,5,39,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
171>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyParametersOrder\CS\Command.cs(40,5,40,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
171>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyParametersOrder\CS\Command.cs(38,43,38,51): error CS0103: The name 'Autodesk' does not exist in the current context
171>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyParametersOrder\CS\Command.cs(39,44,39,52): error CS0103: The name 'Autodesk' does not exist in the current context
171>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyParametersOrder\CS\Command.cs(40,42,40,50): error CS0103: The name 'Autodesk' does not exist in the current context
171>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyParametersOrder\CS\Command.cs(65,37,65,56): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
171>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyParametersOrder\CS\Command.cs(66,33,66,43): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
171>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyParametersOrder\CS\Command.cs(65,22,65,28): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
171>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyParametersOrder\CS\ExternalApplication.cs(45,39,45,59): error CS0246: The type or namespace name 'IExternalApplication' could not be found (are you missing a using directive or an assembly reference?)
171>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyParametersOrder\CS\ExternalApplication.cs(42,5,42,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
171>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyParametersOrder\CS\ExternalApplication.cs(43,5,43,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
171>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyParametersOrder\CS\ExternalApplication.cs(44,5,44,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
171>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyParametersOrder\CS\ExternalApplication.cs(42,43,42,51): error CS0103: The name 'Autodesk' does not exist in the current context
171>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyParametersOrder\CS\ExternalApplication.cs(43,44,43,52): error CS0103: The name 'Autodesk' does not exist in the current context
171>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyParametersOrder\CS\ExternalApplication.cs(44,42,44,50): error CS0103: The name 'Autodesk' does not exist in the current context
171>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyParametersOrder\CS\ExternalApplication.cs(61,49,61,72): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
171>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyParametersOrder\CS\ExternalApplication.cs(61,14,61,22): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
171>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyParametersOrder\CS\ExternalApplication.cs(87,50,87,73): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
171>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyParametersOrder\CS\ExternalApplication.cs(87,14,87,22): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
171>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyParametersOrder\CS\ExternalApplication.cs(100,56,100,79): error CS0246: The type or namespace name 'DocumentOpenedEventArgs' could not be found (are you missing a using directive or an assembly reference?)
171>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyParametersOrder\CS\SortFamilyFilesParamsForm.cs(76,35,76,50): error CS0246: The type or namespace name 'ParametersOrder' could not be found (are you missing a using directive or an assembly reference?)
171>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyParametersOrder\CS\SortFamilyFilesParamsForm.cs(57,40,57,53): error CS0246: The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)
171>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyParametersOrder\CS\SortFamilyFilesParamsForm.cs(51,15,51,28): error CS0246: The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)
171>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyParametersOrder\CS\SortLoadedFamiliesParamsForm.cs(68,35,68,50): error CS0246: The type or namespace name 'ParametersOrder' could not be found (are you missing a using directive or an assembly reference?)
171>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyParametersOrder\CS\SortLoadedFamiliesParamsForm.cs(58,43,58,51): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
171>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyParametersOrder\CS\SortLoadedFamiliesParamsForm.cs(52,15,52,23): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
171>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyParametersOrder\CS\SortLoadedFamiliesParamsForm.cs(150,41,150,59): error CS0246: The type or namespace name 'IFamilyLoadOptions' could not be found (are you missing a using directive or an assembly reference?)
171>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyParametersOrder\CS\SortLoadedFamiliesParamsForm.cs(158,42,158,48): error CS0246: The type or namespace name 'Family' could not be found (are you missing a using directive or an assembly reference?)
171>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FamilyParametersOrder\CS\SortLoadedFamiliesParamsForm.cs(158,85,158,97): error CS0246: The type or namespace name 'FamilySource' could not be found (are you missing a using directive or an assembly reference?)
173>------ Rebuild All started: Project: ExternalResourceUIServer, Configuration: Debug Any CPU ------
172>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
172>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
172>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ArchSample\VB.NET\Command.vb(23,9): error BC40056: Namespace or type specified in the Imports 'Autodesk.Revit' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.
172>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ArchSample\VB.NET\Command.vb(24,9): error BC40056: Namespace or type specified in the Imports 'Autodesk.Revit.UI' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.
172>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ArchSample\VB.NET\Command.vb(25,9): error BC40056: Namespace or type specified in the Imports 'Autodesk.Revit.DB' doesn't contain any public member or cannot be found. Make sure the namespace or the type is defined and contains at least one public member. Make sure the imported element name doesn't use any aliases.
172>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ArchSample\VB.NET\Command.vb(51,50): error BC30002: Type 'ExternalCommandData' is not defined.
172>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ArchSample\VB.NET\Command.vb(51,114): error BC30002: Type 'Autodesk.Revit.DB.ElementSet' is not defined.
172>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ArchSample\VB.NET\Command.vb(52,8): error BC30002: Type 'Autodesk.Revit.UI.Result' is not defined.
172>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ArchSample\VB.NET\Command.vb(52,44): error BC30002: Type 'IExternalCommand' is not defined.
172>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ArchSample\VB.NET\Command.vb(145,83): error BC30002: Type 'Autodesk.Revit.ApplicationServices.Application' is not defined.
172>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ArchSample\VB.NET\Command.vb(146,59): error BC30002: Type 'Autodesk.Revit.DB.ElementSet' is not defined.
172>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ArchSample\VB.NET\Command.vb(232,62): error BC30002: Type 'Autodesk.Revit.ApplicationServices.Application' is not defined.
172>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ArchSample\VB.NET\Command.vb(233,26): error BC30002: Type 'Autodesk.Revit.DB.Element' is not defined.
172>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ArchSample\VB.NET\Command.vb(291,58): error BC30002: Type 'Autodesk.Revit.ApplicationServices.Application' is not defined.
172>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ArchSample\VB.NET\Command.vb(292,29): error BC30002: Type 'Autodesk.Revit.DB.ElementSet' is not defined.
172>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ArchSample\VB.NET\Command.vb(373,62): error BC30002: Type 'Autodesk.Revit.UI.UIApplication' is not defined.
172>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ArchSample\VB.NET\Command.vb(374,27): error BC30002: Type 'Autodesk.Revit.DB.Document' is not defined.
172>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ArchSample\VB.NET\Command.vb(374,107): error BC30002: Type 'ElementSet' is not defined.
172>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ArchSample\VB.NET\Command.vb(33,16): error BC30002: Type 'IExternalCommand' is not defined.
172>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ArchSample\VB.NET\Command.vb(29,2): error BC30002: Type 'Autodesk.Revit.Attributes.Transaction' is not defined.
172>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ArchSample\VB.NET\Command.vb(30,2): error BC30002: Type 'Autodesk.Revit.Attributes.Regeneration' is not defined.
172>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ArchSample\VB.NET\Command.vb(31,2): error BC30002: Type 'Autodesk.Revit.Attributes.Journaling' is not defined.
172>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ArchSample\VB.NET\Command.vb(29,40): error BC30451: 'Autodesk' is not declared. It may be inaccessible due to its protection level.
172>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ArchSample\VB.NET\Command.vb(30,41): error BC30451: 'Autodesk' is not declared. It may be inaccessible due to its protection level.
172>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ArchSample\VB.NET\Command.vb(31,39): error BC30451: 'Autodesk' is not declared. It may be inaccessible due to its protection level.
174>------ Rebuild All started: Project: DimensionLeaderEnd, Configuration: Debug Any CPU ------
173>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
173>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
173>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
173>CSC : error CS0006: Metadata file 'Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ExternalResourceServer\ExternalResourceDBServer\CS\bin\Debug\ExternalResourceDBServer.dll' could not be found
175>------ Rebuild All started: Project: DatumsModification, Configuration: Debug Any CPU ------
174>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
174>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
174>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
174>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DimensionLeaderEnd\CS\Command.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
174>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DimensionLeaderEnd\CS\Command.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
174>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DimensionLeaderEnd\CS\Command.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
174>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DimensionLeaderEnd\CS\Command.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
174>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DimensionLeaderEnd\CS\Command.cs(41,36,41,52): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
174>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DimensionLeaderEnd\CS\Command.cs(39,5,39,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
174>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DimensionLeaderEnd\CS\Command.cs(40,5,40,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
174>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DimensionLeaderEnd\CS\Command.cs(39,43,39,51): error CS0103: The name 'Autodesk' does not exist in the current context
174>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DimensionLeaderEnd\CS\Command.cs(40,44,40,52): error CS0103: The name 'Autodesk' does not exist in the current context
174>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DimensionLeaderEnd\CS\Command.cs(60,37,60,56): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
174>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DimensionLeaderEnd\CS\Command.cs(61,33,61,43): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
174>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DimensionLeaderEnd\CS\Command.cs(60,22,60,28): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
174>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DimensionLeaderEnd\CS\Command.cs(122,41,122,44): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
174>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DimensionLeaderEnd\CS\Command.cs(122,50,122,53): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
174>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DimensionLeaderEnd\CS\Command.cs(122,15,122,18): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
174>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DimensionLeaderEnd\CS\Command.cs(136,37,136,53): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
174>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DimensionLeaderEnd\CS\Command.cs(134,5,134,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
174>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DimensionLeaderEnd\CS\Command.cs(135,5,135,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
174>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DimensionLeaderEnd\CS\Command.cs(134,43,134,51): error CS0103: The name 'Autodesk' does not exist in the current context
174>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DimensionLeaderEnd\CS\Command.cs(135,44,135,52): error CS0103: The name 'Autodesk' does not exist in the current context
174>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DimensionLeaderEnd\CS\Command.cs(154,37,154,56): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
174>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DimensionLeaderEnd\CS\Command.cs(155,33,155,43): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
174>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DimensionLeaderEnd\CS\Command.cs(154,22,154,28): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
176>------ Rebuild All started: Project: FabricationPartLayout, Configuration: Debug Any CPU ------
176>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
176>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
176>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ChangeService.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ChangeService.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ChangeService.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ChangeService.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ExportToMAJ.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ExportToMAJ.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ExportToMAJ.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ExportToMAJ.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabPartGeometry.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabPartGeometry.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabPartGeometry.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabPartGeometry.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ItemFile.cs(1,7,1,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ItemFile.cs(2,7,2,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\SplitStraight.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\SplitStraight.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\SplitStraight.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\SplitStraight.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\SplitStraight.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\PartRenumber.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\PartRenumber.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\PartRenumber.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\PartRenumber.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\HangerRods.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\HangerRods.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\HangerRods.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\HangerRods.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\HangerRods.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\PartInfo.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\PartInfo.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\PartInfo.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\PartInfo.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\PartInfo.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ExportToPCF.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ExportToPCF.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ExportToPCF.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ExportToPCF.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\CustomData.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\CustomData.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\CustomData.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\CustomData.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\CustomData.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\Ancillaries.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\Ancillaries.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\Ancillaries.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\Ancillaries.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\Ancillaries.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ButtonGroupExclusions.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ButtonGroupExclusions.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ButtonGroupExclusions.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ButtonGroupExclusions.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ConvertToFabrication.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ConvertToFabrication.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ConvertToFabrication.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ConvertToFabrication.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabricationPartLayout.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabricationPartLayout.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabricationPartLayout.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabricationPartLayout.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\OptimizeStraights.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\OptimizeStraights.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\OptimizeStraights.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\StretchAndFit.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\StretchAndFit.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\StretchAndFit.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\StretchAndFit.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ChangeService.cs(40,33,40,49): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ChangeService.cs(38,5,38,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ChangeService.cs(39,5,39,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ChangeService.cs(38,43,38,51): error CS0103: The name 'Autodesk' does not exist in the current context
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ChangeService.cs(39,44,39,52): error CS0103: The name 'Autodesk' does not exist in the current context
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ChangeService.cs(58,37,58,56): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ChangeService.cs(59,33,59,43): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ChangeService.cs(58,22,58,28): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ChangeService.cs(126,30,126,46): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ChangeService.cs(124,5,124,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ChangeService.cs(125,5,125,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ChangeService.cs(124,43,124,51): error CS0103: The name 'Autodesk' does not exist in the current context
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ChangeService.cs(125,44,125,52): error CS0103: The name 'Autodesk' does not exist in the current context
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ChangeService.cs(144,37,144,56): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ChangeService.cs(145,33,145,43): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ChangeService.cs(144,22,144,28): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ChangeService.cs(228,31,228,47): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ChangeService.cs(226,5,226,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ChangeService.cs(227,5,227,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ChangeService.cs(226,43,226,51): error CS0103: The name 'Autodesk' does not exist in the current context
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ChangeService.cs(227,44,227,52): error CS0103: The name 'Autodesk' does not exist in the current context
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ChangeService.cs(246,37,246,56): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ChangeService.cs(247,33,247,43): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ChangeService.cs(246,22,246,28): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ExportToMAJ.cs(42,31,42,47): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ExportToMAJ.cs(40,5,40,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ExportToMAJ.cs(41,5,41,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ExportToMAJ.cs(40,43,40,51): error CS0103: The name 'Autodesk' does not exist in the current context
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ExportToMAJ.cs(41,44,41,52): error CS0103: The name 'Autodesk' does not exist in the current context
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ExportToMAJ.cs(60,37,60,56): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ExportToMAJ.cs(61,33,61,43): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ExportToMAJ.cs(60,22,60,28): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabPartGeometry.cs(43,35,43,51): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabPartGeometry.cs(41,5,41,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabPartGeometry.cs(42,5,42,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabPartGeometry.cs(41,43,41,51): error CS0103: The name 'Autodesk' does not exist in the current context
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabPartGeometry.cs(42,44,42,52): error CS0103: The name 'Autodesk' does not exist in the current context
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabPartGeometry.cs(45,37,45,52): error CS0246: The type or namespace name 'GeometryElement' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabPartGeometry.cs(45,21,45,25): error CS0246: The type or namespace name 'Mesh' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabPartGeometry.cs(70,48,70,52): error CS0246: The type or namespace name 'Mesh' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabPartGeometry.cs(118,37,118,56): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabPartGeometry.cs(119,33,119,43): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabPartGeometry.cs(118,22,118,28): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ItemFile.cs(16,44,16,60): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ItemFile.cs(14,5,14,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ItemFile.cs(15,5,15,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ItemFile.cs(14,43,14,51): error CS0103: The name 'Autodesk' does not exist in the current context
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ItemFile.cs(15,44,15,52): error CS0103: The name 'Autodesk' does not exist in the current context
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ItemFile.cs(34,37,34,56): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ItemFile.cs(35,33,35,43): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ItemFile.cs(34,22,34,28): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ItemFile.cs(132,65,132,86): error CS0246: The type or namespace name 'FabricationItemFolder' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ItemFile.cs(132,15,132,34): error CS0246: The type or namespace name 'FabricationItemFile' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ItemFile.cs(147,68,147,89): error CS0246: The type or namespace name 'FabricationItemFolder' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ItemFile.cs(147,15,147,34): error CS0246: The type or namespace name 'FabricationItemFile' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ItemFile.cs(182,41,182,57): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ItemFile.cs(180,5,180,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ItemFile.cs(181,5,181,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ItemFile.cs(180,43,180,51): error CS0103: The name 'Autodesk' does not exist in the current context
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ItemFile.cs(181,44,181,52): error CS0103: The name 'Autodesk' does not exist in the current context
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ItemFile.cs(200,37,200,56): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ItemFile.cs(201,33,201,43): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ItemFile.cs(200,22,200,28): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\SplitStraight.cs(42,33,42,49): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\SplitStraight.cs(40,5,40,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\SplitStraight.cs(41,5,41,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\SplitStraight.cs(40,43,40,51): error CS0103: The name 'Autodesk' does not exist in the current context
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\SplitStraight.cs(41,44,41,52): error CS0103: The name 'Autodesk' does not exist in the current context
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\SplitStraight.cs(60,37,60,56): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\SplitStraight.cs(61,33,61,43): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\SplitStraight.cs(60,22,60,28): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\PartRenumber.cs(41,32,41,48): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\PartRenumber.cs(39,5,39,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\PartRenumber.cs(40,5,40,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\PartRenumber.cs(39,43,39,51): error CS0103: The name 'Autodesk' does not exist in the current context
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\PartRenumber.cs(40,44,40,52): error CS0103: The name 'Autodesk' does not exist in the current context
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\PartRenumber.cs(68,37,68,56): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\PartRenumber.cs(69,33,69,43): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\PartRenumber.cs(68,22,68,28): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\PartRenumber.cs(175,28,175,43): error CS0246: The type or namespace name 'FabricationPart' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\PartRenumber.cs(185,28,185,43): error CS0246: The type or namespace name 'FabricationPart' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\PartRenumber.cs(201,32,201,47): error CS0246: The type or namespace name 'FabricationPart' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\HangerRods.cs(43,30,43,46): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\HangerRods.cs(41,5,41,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\HangerRods.cs(42,5,42,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\HangerRods.cs(41,43,41,51): error CS0103: The name 'Autodesk' does not exist in the current context
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\HangerRods.cs(42,44,42,52): error CS0103: The name 'Autodesk' does not exist in the current context
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\HangerRods.cs(61,37,61,56): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\HangerRods.cs(62,33,62,43): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\HangerRods.cs(61,22,61,28): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\HangerRods.cs(106,35,106,51): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\HangerRods.cs(104,5,104,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\HangerRods.cs(105,5,105,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\HangerRods.cs(104,43,104,51): error CS0103: The name 'Autodesk' does not exist in the current context
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\HangerRods.cs(105,44,105,52): error CS0103: The name 'Autodesk' does not exist in the current context
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\HangerRods.cs(124,37,124,56): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\HangerRods.cs(125,33,125,43): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\HangerRods.cs(124,22,124,28): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\HangerRods.cs(178,34,178,50): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\HangerRods.cs(176,5,176,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\HangerRods.cs(177,5,177,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\HangerRods.cs(176,43,176,51): error CS0103: The name 'Autodesk' does not exist in the current context
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\HangerRods.cs(177,44,177,52): error CS0103: The name 'Autodesk' does not exist in the current context
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\HangerRods.cs(196,37,196,56): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\HangerRods.cs(197,33,197,43): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\HangerRods.cs(196,22,196,28): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\HangerRods.cs(250,49,250,65): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\HangerRods.cs(248,5,248,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\HangerRods.cs(249,5,249,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\HangerRods.cs(248,43,248,51): error CS0103: The name 'Autodesk' does not exist in the current context
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\HangerRods.cs(249,44,249,52): error CS0103: The name 'Autodesk' does not exist in the current context
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\HangerRods.cs(268,37,268,56): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\HangerRods.cs(269,33,269,43): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\HangerRods.cs(268,22,268,28): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\HangerRods.cs(322,49,322,65): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\HangerRods.cs(320,5,320,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\HangerRods.cs(321,5,321,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\HangerRods.cs(320,43,320,51): error CS0103: The name 'Autodesk' does not exist in the current context
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\HangerRods.cs(321,44,321,52): error CS0103: The name 'Autodesk' does not exist in the current context
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\HangerRods.cs(340,37,340,56): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\HangerRods.cs(341,33,341,43): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\HangerRods.cs(340,22,340,28): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\PartInfo.cs(42,28,42,44): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\PartInfo.cs(40,5,40,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\PartInfo.cs(41,5,41,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\PartInfo.cs(40,43,40,51): error CS0103: The name 'Autodesk' does not exist in the current context
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\PartInfo.cs(41,44,41,52): error CS0103: The name 'Autodesk' does not exist in the current context
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\PartInfo.cs(60,37,60,56): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\PartInfo.cs(61,33,61,43): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\PartInfo.cs(60,22,60,28): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\PartInfo.cs(155,42,155,50): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\PartInfo.cs(155,71,155,82): error CS0246: The type or namespace name 'ForgeTypeId' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ExportToPCF.cs(43,31,43,47): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ExportToPCF.cs(41,5,41,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ExportToPCF.cs(42,5,42,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ExportToPCF.cs(41,43,41,51): error CS0103: The name 'Autodesk' does not exist in the current context
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ExportToPCF.cs(42,44,42,52): error CS0103: The name 'Autodesk' does not exist in the current context
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ExportToPCF.cs(61,37,61,56): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ExportToPCF.cs(62,33,62,43): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ExportToPCF.cs(61,22,61,28): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\CustomData.cs(49,45,49,53): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\CustomData.cs(49,59,49,69): error CS0246: The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\CustomData.cs(49,21,49,27): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\CustomData.cs(180,33,180,49): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\CustomData.cs(178,5,178,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\CustomData.cs(179,5,179,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\CustomData.cs(178,43,178,51): error CS0103: The name 'Autodesk' does not exist in the current context
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\CustomData.cs(179,44,179,52): error CS0103: The name 'Autodesk' does not exist in the current context
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\CustomData.cs(198,37,198,56): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\CustomData.cs(199,33,199,43): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\CustomData.cs(198,22,198,28): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\CustomData.cs(214,33,214,49): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\CustomData.cs(212,5,212,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\CustomData.cs(213,5,213,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\CustomData.cs(212,43,212,51): error CS0103: The name 'Autodesk' does not exist in the current context
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\CustomData.cs(213,44,213,52): error CS0103: The name 'Autodesk' does not exist in the current context
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\CustomData.cs(232,37,232,56): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\CustomData.cs(233,33,233,43): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\CustomData.cs(232,22,232,28): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\Ancillaries.cs(41,31,41,47): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\Ancillaries.cs(39,5,39,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\Ancillaries.cs(40,5,40,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\Ancillaries.cs(39,43,39,51): error CS0103: The name 'Autodesk' does not exist in the current context
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\Ancillaries.cs(40,44,40,52): error CS0103: The name 'Autodesk' does not exist in the current context
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\Ancillaries.cs(59,37,59,56): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\Ancillaries.cs(60,33,60,43): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\Ancillaries.cs(59,22,59,28): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ButtonGroupExclusions.cs(40,41,40,57): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ButtonGroupExclusions.cs(38,5,38,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ButtonGroupExclusions.cs(39,5,39,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ButtonGroupExclusions.cs(38,43,38,51): error CS0103: The name 'Autodesk' does not exist in the current context
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ButtonGroupExclusions.cs(39,44,39,52): error CS0103: The name 'Autodesk' does not exist in the current context
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ButtonGroupExclusions.cs(58,37,58,56): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ButtonGroupExclusions.cs(59,33,59,43): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ButtonGroupExclusions.cs(58,22,58,28): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ConvertToFabrication.cs(40,40,40,56): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ConvertToFabrication.cs(38,5,38,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ConvertToFabrication.cs(39,5,39,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ConvertToFabrication.cs(38,43,38,51): error CS0103: The name 'Autodesk' does not exist in the current context
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ConvertToFabrication.cs(39,44,39,52): error CS0103: The name 'Autodesk' does not exist in the current context
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ConvertToFabrication.cs(58,37,58,56): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ConvertToFabrication.cs(59,33,59,43): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\ConvertToFabrication.cs(58,22,58,28): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabricationPartLayout.cs(41,41,41,57): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabricationPartLayout.cs(39,5,39,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabricationPartLayout.cs(40,5,40,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabricationPartLayout.cs(39,43,39,51): error CS0103: The name 'Autodesk' does not exist in the current context
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabricationPartLayout.cs(40,44,40,52): error CS0103: The name 'Autodesk' does not exist in the current context
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabricationPartLayout.cs(43,7,43,15): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabricationPartLayout.cs(44,13,44,31): error CS0246: The type or namespace name 'FabricationService' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabricationPartLayout.cs(82,37,82,56): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabricationPartLayout.cs(83,33,83,43): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabricationPartLayout.cs(82,22,82,28): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabricationPartLayout.cs(633,26,633,41): error CS0246: The type or namespace name 'FabricationPart' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabricationPartLayout.cs(667,24,667,39): error CS0246: The type or namespace name 'FabricationPart' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabricationPartLayout.cs(704,35,704,44): error CS0246: The type or namespace name 'Connector' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabricationPartLayout.cs(704,56,704,65): error CS0246: The type or namespace name 'Connector' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabricationPartLayout.cs(748,47,748,56): error CS0246: The type or namespace name 'Connector' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabricationPartLayout.cs(748,68,748,77): error CS0246: The type or namespace name 'Connector' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabricationPartLayout.cs(748,118,748,146): error CS0246: The type or namespace name 'FabricationPartJustification' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabricationPartLayout.cs(784,45,784,63): error CS0246: The type or namespace name 'FabricationService' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabricationPartLayout.cs(784,7,784,31): error CS0246: The type or namespace name 'FabricationServiceButton' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabricationPartLayout.cs(819,38,819,62): error CS0246: The type or namespace name 'FabricationServiceButton' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabricationPartLayout.cs(819,83,819,92): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabricationPartLayout.cs(819,3,819,18): error CS0246: The type or namespace name 'FabricationPart' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabricationPartLayout.cs(843,33,843,49): error CS0246: The type or namespace name 'ConnectorManager' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabricationPartLayout.cs(843,3,843,12): error CS0246: The type or namespace name 'Connector' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabricationPartLayout.cs(863,35,863,51): error CS0246: The type or namespace name 'ConnectorManager' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabricationPartLayout.cs(863,3,863,12): error CS0246: The type or namespace name 'Connector' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabricationPartLayout.cs(883,56,883,72): error CS0246: The type or namespace name 'ConnectorManager' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabricationPartLayout.cs(883,7,883,16): error CS0246: The type or namespace name 'Connector' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabricationPartLayout.cs(905,25,905,49): error CS0246: The type or namespace name 'FabricationConfiguration' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabricationPartLayout.cs(930,21,930,45): error CS0246: The type or namespace name 'FabricationConfiguration' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabricationPartLayout.cs(955,31,955,55): error CS0246: The type or namespace name 'FabricationConfiguration' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\FabricationPartLayout.cs(980,37,980,61): error CS0246: The type or namespace name 'FabricationConfiguration' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\OptimizeStraights.cs(39,37,39,53): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\OptimizeStraights.cs(37,5,37,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\OptimizeStraights.cs(38,5,38,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\OptimizeStraights.cs(37,43,37,51): error CS0103: The name 'Autodesk' does not exist in the current context
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\OptimizeStraights.cs(38,44,38,52): error CS0103: The name 'Autodesk' does not exist in the current context
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\OptimizeStraights.cs(57,37,57,56): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\OptimizeStraights.cs(58,33,58,43): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\OptimizeStraights.cs(57,22,57,28): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\StretchAndFit.cs(40,33,40,49): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\StretchAndFit.cs(38,5,38,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\StretchAndFit.cs(39,5,39,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\StretchAndFit.cs(38,43,38,51): error CS0103: The name 'Autodesk' does not exist in the current context
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\StretchAndFit.cs(39,44,39,52): error CS0103: The name 'Autodesk' does not exist in the current context
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\StretchAndFit.cs(58,37,58,56): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\StretchAndFit.cs(59,33,59,43): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\StretchAndFit.cs(58,22,58,28): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\StretchAndFit.cs(125,62,125,70): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\StretchAndFit.cs(125,76,125,85): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\StretchAndFit.cs(125,15,125,24): error CS0246: The type or namespace name 'Connector' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\StretchAndFit.cs(152,60,152,68): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\StretchAndFit.cs(152,74,152,83): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
176>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\FabricationPartLayout\CS\StretchAndFit.cs(152,15,152,24): error CS0246: The type or namespace name 'Connector' could not be found (are you missing a using directive or an assembly reference?)
177>------ Rebuild All started: Project: GenericStructuralConnection, Configuration: Debug Any CPU ------
175>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
175>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
175>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
175>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationApp.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
175>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationApp.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
175>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationApp.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
175>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationApp.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
175>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationApp.cs(34,7,34,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
175>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationCmd.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
175>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationCmd.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
175>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationCmd.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
175>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationApp.cs(43,42,43,62): error CS0246: The type or namespace name 'IExternalApplication' could not be found (are you missing a using directive or an assembly reference?)
175>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationApp.cs(41,6,41,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
175>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationApp.cs(42,6,42,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
175>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationApp.cs(41,44,41,52): error CS0103: The name 'Autodesk' does not exist in the current context
175>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationApp.cs(42,45,42,53): error CS0103: The name 'Autodesk' does not exist in the current context
175>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationApp.cs(54,34,54,57): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
175>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationApp.cs(54,16,54,22): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
175>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationApp.cs(64,33,64,56): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
175>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationApp.cs(64,16,64,22): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
175>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationCmd.cs(40,43,40,59): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
175>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationCmd.cs(38,6,38,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
175>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationCmd.cs(39,6,39,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
175>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationCmd.cs(38,44,38,52): error CS0103: The name 'Autodesk' does not exist in the current context
175>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationCmd.cs(39,45,39,53): error CS0103: The name 'Autodesk' does not exist in the current context
175>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationCmd.cs(85,39,85,58): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
175>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationCmd.cs(86,35,86,45): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
175>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationCmd.cs(85,24,85,30): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
175>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationCmd.cs(154,40,154,46): error CS0246: The type or namespace name 'Leader' could not be found (are you missing a using directive or an assembly reference?)
175>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationCmd.cs(154,17,154,23): error CS0246: The type or namespace name 'Leader' could not be found (are you missing a using directive or an assembly reference?)
175>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationCmd.cs(176,35,176,51): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
175>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationCmd.cs(174,6,174,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
175>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationCmd.cs(175,6,175,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
175>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationCmd.cs(174,44,174,52): error CS0103: The name 'Autodesk' does not exist in the current context
175>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationCmd.cs(175,45,175,53): error CS0103: The name 'Autodesk' does not exist in the current context
175>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationCmd.cs(201,38,201,57): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
175>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationCmd.cs(202,34,202,44): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
175>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationCmd.cs(201,23,201,29): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
175>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationCmd.cs(257,37,257,42): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
175>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationCmd.cs(257,49,257,54): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
175>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationCmd.cs(257,66,257,69): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
175>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationCmd.cs(257,16,257,21): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
175>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationCmd.cs(182,41,182,51): error CS0246: The type or namespace name 'DatumPlane' could not be found (are you missing a using directive or an assembly reference?)
175>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationCmd.cs(286,37,286,53): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
175>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationCmd.cs(284,6,284,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
175>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationCmd.cs(285,6,285,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
175>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationCmd.cs(284,44,284,52): error CS0103: The name 'Autodesk' does not exist in the current context
175>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationCmd.cs(285,45,285,53): error CS0103: The name 'Autodesk' does not exist in the current context
175>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationCmd.cs(311,38,311,57): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
175>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationCmd.cs(312,34,312,44): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
175>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationCmd.cs(311,23,311,29): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
175>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DatumsModification\CS\DatumsModificationCmd.cs(292,41,292,50): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
178>------ Rebuild All started: Project: RebarContainerAnyShapeType, Configuration: Debug Any CPU ------
177>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
177>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
177>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
177>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\Command.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
177>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\Command.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
177>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\Command.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
177>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\Command.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
177>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\Command.cs(34,7,34,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
177>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\Command.cs(35,7,35,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
177>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\CommandOptions.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
177>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\CommandOptions.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
177>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\CommandOptions.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
177>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\DetailedStructuralConnectionOps.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
177>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\DetailedStructuralConnectionOps.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
177>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\DetailedStructuralConnectionOps.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
177>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\DetailedStructuralConnectionOps.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
177>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\DetailedStructuralConnectionOps.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
177>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\DetailedStructuralConnectionOps.cs(34,7,34,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
177>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\DetailedStructuralConnectionOps.cs(35,7,35,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
177>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\StructuralConnectionSelectionUtils.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
177>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\StructuralConnectionSelectionUtils.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
177>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\StructuralConnectionSelectionUtils.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
177>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\StructuralConnectionSelectionUtils.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
177>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\StructuralConnectionSelectionUtils.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
177>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\GenericStructuralConnectionOps.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
177>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\GenericStructuralConnectionOps.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
177>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\GenericStructuralConnectionOps.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
177>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\GenericStructuralConnectionOps.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
177>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\GenericStructuralConnectionOps.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
177>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\GenericStructuralConnectionOps.cs(34,7,34,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
177>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\StructuralConnectionSelectionFilter.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
177>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\StructuralConnectionSelectionFilter.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
177>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\StructuralConnectionSelectionFilter.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
177>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\StructuralConnectionSelectionFilter.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
177>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\Command.cs(45,28,45,44): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
177>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\Command.cs(42,6,42,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
177>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\Command.cs(43,6,43,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
177>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\Command.cs(44,6,44,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
177>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\Command.cs(42,44,42,52): error CS0103: The name 'Autodesk' does not exist in the current context
177>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\Command.cs(43,45,43,53): error CS0103: The name 'Autodesk' does not exist in the current context
177>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\Command.cs(44,43,44,51): error CS0103: The name 'Autodesk' does not exist in the current context
177>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\Command.cs(65,31,65,50): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
177>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\Command.cs(65,84,65,94): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
177>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\Command.cs(65,16,65,22): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
177>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\DetailedStructuralConnectionOps.cs(50,65,50,75): error CS0246: The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)
177>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\DetailedStructuralConnectionOps.cs(50,23,50,29): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
177>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\DetailedStructuralConnectionOps.cs(93,65,93,75): error CS0246: The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)
177>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\DetailedStructuralConnectionOps.cs(93,23,93,29): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
177>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\DetailedStructuralConnectionOps.cs(136,63,136,73): error CS0246: The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)
177>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\DetailedStructuralConnectionOps.cs(136,23,136,29): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
177>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\DetailedStructuralConnectionOps.cs(175,74,175,84): error CS0246: The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)
177>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\DetailedStructuralConnectionOps.cs(175,23,175,29): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
177>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\DetailedStructuralConnectionOps.cs(233,64,233,74): error CS0246: The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)
177>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\DetailedStructuralConnectionOps.cs(233,23,233,29): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
177>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\DetailedStructuralConnectionOps.cs(274,41,274,49): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
177>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\DetailedStructuralConnectionOps.cs(274,55,274,82): error CS0246: The type or namespace name 'StructuralConnectionHandler' could not be found (are you missing a using directive or an assembly reference?)
177>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\DetailedStructuralConnectionOps.cs(274,24,274,30): error CS0246: The type or namespace name 'Schema' could not be found (are you missing a using directive or an assembly reference?)
177>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\DetailedStructuralConnectionOps.cs(291,58,291,85): error CS0246: The type or namespace name 'StructuralConnectionHandler' could not be found (are you missing a using directive or an assembly reference?)
177>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\DetailedStructuralConnectionOps.cs(291,92,291,100): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
177>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\StructuralConnectionSelectionUtils.cs(45,68,45,78): error CS0246: The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)
177>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\StructuralConnectionSelectionUtils.cs(45,23,45,50): error CS0246: The type or namespace name 'StructuralConnectionHandler' could not be found (are you missing a using directive or an assembly reference?)
177>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\StructuralConnectionSelectionUtils.cs(68,64,68,74): error CS0246: The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)
177>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\StructuralConnectionSelectionUtils.cs(68,28,68,37): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
177>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\GenericStructuralConnectionOps.cs(49,64,49,74): error CS0246: The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)
177>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\GenericStructuralConnectionOps.cs(49,23,49,29): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
177>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\GenericStructuralConnectionOps.cs(86,64,86,74): error CS0246: The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)
177>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\GenericStructuralConnectionOps.cs(86,23,86,29): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
177>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\GenericStructuralConnectionOps.cs(126,62,126,72): error CS0246: The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)
177>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\GenericStructuralConnectionOps.cs(126,23,126,29): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
177>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\GenericStructuralConnectionOps.cs(167,64,167,74): error CS0246: The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)
177>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\GenericStructuralConnectionOps.cs(167,23,167,29): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
177>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\StructuralConnectionSelectionFilter.cs(38,49,38,65): error CS0246: The type or namespace name 'ISelectionFilter' could not be found (are you missing a using directive or an assembly reference?)
177>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\StructuralConnectionSelectionFilter.cs(56,34,56,41): error CS0246: The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)
177>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\StructuralConnectionSelectionFilter.cs(66,36,66,45): error CS0246: The type or namespace name 'Reference' could not be found (are you missing a using directive or an assembly reference?)
177>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\StructuralConnectionSelectionFilter.cs(66,53,66,56): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
177>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\StructuralConnectionSelectionFilter.cs(46,52,46,67): error CS0246: The type or namespace name 'LogicalOrFilter' could not be found (are you missing a using directive or an assembly reference?)
177>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GenericStructuralConnection\CS\StructuralConnectionSelectionFilter.cs(40,9,40,24): error CS0246: The type or namespace name 'LogicalOrFilter' could not be found (are you missing a using directive or an assembly reference?)
179>------ Rebuild All started: Project: CapitalizeAllTextNotes, Configuration: Debug Any CPU ------
178>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
178>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
178>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\BeamFramReinMaker.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\BeamFramReinMaker.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\BeamFramReinMaker.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\BeamFramReinMaker.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\BeamFramReinMakerForm.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\BeamFramReinMakerForm.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\BeamFramReinMakerForm.cs(34,7,34,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\BeamGeometrySupport.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\BeamGeometrySupport.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\BeamGeometrySupport.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ColumnFramReinMaker.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ColumnFramReinMaker.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ColumnFramReinMaker.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ColumnFramReinMaker.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ColumnFramReinMakerForm.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ColumnFramReinMakerForm.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ColumnFramReinMakerForm.cs(34,7,34,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ColumnGeometrySupport.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ColumnGeometrySupport.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ColumnGeometrySupport.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\Command.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\Command.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\Command.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\FrameReinMakerFactory.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\FrameReinMakerFactory.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\FrameReinMakerFactory.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\FrameReinMakerFactory.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\FramReinMaker.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\FramReinMaker.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\FramReinMaker.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\FramReinMaker.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomData.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeometrySupport.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeometrySupport.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomUtil.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomUtil.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomUtil.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ParameterUtil.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ParameterUtil.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeometrySupport.cs(34,24,34,32): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeometrySupport.cs(35,10,35,18): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomUtil.cs(35,21,35,29): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomUtil.cs(34,24,34,32): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomData.cs(48,16,48,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomData.cs(63,22,63,27): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomData.cs(112,30,112,38): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomData.cs(112,66,112,71): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\BeamFramReinMaker.cs(64,14,64,26): error CS0246: The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomData.cs(40,8,40,16): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\BeamFramReinMaker.cs(79,14,79,26): error CS0246: The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\BeamFramReinMaker.cs(94,14,94,26): error CS0246: The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomData.cs(41,14,41,19): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\BeamFramReinMaker.cs(109,14,109,26): error CS0246: The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\BeamFramReinMaker.cs(162,14,162,27): error CS0246: The type or namespace name 'RebarHookType' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\BeamFramReinMaker.cs(177,14,177,27): error CS0246: The type or namespace name 'RebarHookType' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\BeamFramReinMaker.cs(266,35,266,49): error CS0246: The type or namespace name 'RebarContainer' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\BeamFramReinMaker.cs(280,39,280,53): error CS0246: The type or namespace name 'RebarContainer' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\BeamFramReinMaker.cs(302,52,302,66): error CS0246: The type or namespace name 'RebarContainer' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\BeamFramReinMaker.cs(302,14,302,32): error CS0246: The type or namespace name 'RebarContainerItem' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\BeamFramReinMaker.cs(335,15,335,35): error CS0246: The type or namespace name 'RebarHookOrientation' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\BeamFramReinMaker.cs(366,33,366,47): error CS0246: The type or namespace name 'RebarContainer' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\BeamFramReinMaker.cs(387,46,387,60): error CS0246: The type or namespace name 'RebarContainer' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\BeamFramReinMaker.cs(387,15,387,33): error CS0246: The type or namespace name 'RebarContainerItem' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\BeamFramReinMaker.cs(197,32,197,51): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\BeamFramReinMaker.cs(197,65,197,79): error CS0246: The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\BeamFramReinMaker.cs(47,7,47,19): error CS0246: The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\BeamFramReinMaker.cs(48,7,48,19): error CS0246: The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\BeamFramReinMaker.cs(49,7,49,19): error CS0246: The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\BeamFramReinMaker.cs(50,7,50,19): error CS0246: The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\BeamFramReinMaker.cs(52,7,52,20): error CS0246: The type or namespace name 'RebarHookType' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\BeamFramReinMaker.cs(53,7,53,20): error CS0246: The type or namespace name 'RebarHookType' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomData.cs(260,48,260,56): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomData.cs(262,23,262,31): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomData.cs(262,54,262,62): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomData.cs(262,83,262,91): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeometrySupport.cs(164,49,164,57): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeometrySupport.cs(164,17,164,25): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeometrySupport.cs(186,63,186,71): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeometrySupport.cs(186,22,186,30): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeometrySupport.cs(222,22,222,30): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeometrySupport.cs(253,36,253,41): error CS0246: The type or namespace name 'Solid' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeometrySupport.cs(281,40,281,45): error CS0246: The type or namespace name 'Solid' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeometrySupport.cs(281,15,281,19): error CS0246: The type or namespace name 'Face' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeometrySupport.cs(345,43,345,52): error CS0246: The type or namespace name 'EdgeArray' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeometrySupport.cs(345,20,345,24): error CS0246: The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeometrySupport.cs(78,30,78,44): error CS0246: The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeometrySupport.cs(78,54,78,61): error CS0246: The type or namespace name 'Options' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeometrySupport.cs(46,17,46,22): error CS0246: The type or namespace name 'Solid' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeometrySupport.cs(51,17,51,21): error CS0246: The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeometrySupport.cs(56,17,56,25): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeometrySupport.cs(61,22,61,26): error CS0246: The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\BeamGeometrySupport.cs(230,16,230,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeometrySupport.cs(66,22,66,30): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeometrySupport.cs(71,17,71,26): error CS0246: The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\BeamGeometrySupport.cs(50,36,50,50): error CS0246: The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\BeamGeometrySupport.cs(50,60,50,67): error CS0246: The type or namespace name 'Options' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomUtil.cs(65,36,65,44): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomUtil.cs(65,65,65,73): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomUtil.cs(87,39,87,43): error CS0246: The type or namespace name 'Face' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomUtil.cs(87,50,87,54): error CS0246: The type or namespace name 'Line' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomUtil.cs(88,49,88,58): error CS0246: The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomUtil.cs(88,70,88,79): error CS0246: The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomUtil.cs(141,44,141,52): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomUtil.cs(141,76,141,84): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomUtil.cs(158,48,158,56): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomUtil.cs(158,80,158,88): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ColumnFramReinMaker.cs(61,14,61,26): error CS0246: The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ColumnFramReinMaker.cs(76,14,76,26): error CS0246: The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ColumnFramReinMaker.cs(91,14,91,26): error CS0246: The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomUtil.cs(175,57,175,65): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomUtil.cs(175,83,175,91): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomUtil.cs(175,23,175,31): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomUtil.cs(201,56,201,64): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomUtil.cs(201,23,201,31): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomUtil.cs(218,40,218,48): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ColumnFramReinMaker.cs(163,14,163,27): error CS0246: The type or namespace name 'RebarHookType' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomUtil.cs(232,52,232,60): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomUtil.cs(232,78,232,86): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomUtil.cs(232,23,232,31): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ColumnFramReinMaker.cs(250,39,250,53): error CS0246: The type or namespace name 'RebarContainer' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomUtil.cs(247,52,247,60): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomUtil.cs(247,78,247,86): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomUtil.cs(247,23,247,31): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ColumnFramReinMaker.cs(271,52,271,66): error CS0246: The type or namespace name 'RebarContainer' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ColumnFramReinMaker.cs(271,14,271,32): error CS0246: The type or namespace name 'RebarContainerItem' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomUtil.cs(262,60,262,68): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomUtil.cs(262,23,262,31): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ColumnFramReinMaker.cs(300,50,300,64): error CS0246: The type or namespace name 'RebarContainer' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ColumnFramReinMaker.cs(300,14,300,32): error CS0246: The type or namespace name 'RebarContainerItem' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomUtil.cs(277,60,277,68): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomUtil.cs(277,89,277,98): error CS0246: The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ColumnFramReinMaker.cs(339,38,339,52): error CS0246: The type or namespace name 'RebarContainer' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomUtil.cs(277,23,277,31): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomUtil.cs(305,57,305,65): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomUtil.cs(305,86,305,94): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomUtil.cs(305,23,305,31): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ColumnFramReinMaker.cs(183,34,183,53): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ColumnFramReinMaker.cs(183,67,183,81): error CS0246: The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomUtil.cs(319,58,319,66): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomUtil.cs(319,90,319,98): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomUtil.cs(319,120,319,128): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomUtil.cs(319,23,319,43): error CS0246: The type or namespace name 'RebarHookOrientation' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ColumnFramReinMaker.cs(45,7,45,19): error CS0246: The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomUtil.cs(347,41,347,49): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ColumnFramReinMaker.cs(46,7,46,19): error CS0246: The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ColumnFramReinMaker.cs(47,7,47,19): error CS0246: The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ColumnFramReinMaker.cs(48,7,48,20): error CS0246: The type or namespace name 'RebarHookType' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomUtil.cs(366,41,366,49): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\GeomUtil.cs(366,67,366,75): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ParameterUtil.cs(46,39,46,46): error CS0246: The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ParameterUtil.cs(80,39,80,46): error CS0246: The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ParameterUtil.cs(111,39,111,46): error CS0246: The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ParameterUtil.cs(142,39,142,46): error CS0246: The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ParameterUtil.cs(142,82,142,90): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ParameterUtil.cs(173,39,173,46): error CS0246: The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ParameterUtil.cs(173,56,173,72): error CS0246: The type or namespace name 'BuiltInParameter' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ParameterUtil.cs(203,39,203,46): error CS0246: The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ParameterUtil.cs(203,56,203,72): error CS0246: The type or namespace name 'BuiltInParameter' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ParameterUtil.cs(232,39,232,46): error CS0246: The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ParameterUtil.cs(232,56,232,72): error CS0246: The type or namespace name 'BuiltInParameter' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ParameterUtil.cs(261,39,261,46): error CS0246: The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ParameterUtil.cs(262,11,262,27): error CS0246: The type or namespace name 'BuiltInParameter' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ParameterUtil.cs(262,43,262,51): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ParameterUtil.cs(289,40,289,49): error CS0246: The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ParameterUtil.cs(308,45,308,57): error CS0246: The type or namespace name 'ParameterSet' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ParameterUtil.cs(308,21,308,30): error CS0246: The type or namespace name 'Parameter' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\FrameReinMakerFactory.cs(49,38,49,57): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\FrameReinMakerFactory.cs(42,9,42,28): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\FrameReinMakerFactory.cs(43,9,43,23): error CS0246: The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\FramReinMaker.cs(89,22,89,34): error CS0246: The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\FramReinMaker.cs(97,22,97,34): error CS0246: The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\FramReinMaker.cs(105,22,105,34): error CS0246: The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\FramReinMaker.cs(113,21,113,33): error CS0246: The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\FramReinMaker.cs(121,22,121,34): error CS0246: The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\FramReinMaker.cs(129,22,129,34): error CS0246: The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ColumnGeometrySupport.cs(51,36,51,50): error CS0246: The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\ColumnGeometrySupport.cs(51,60,51,67): error CS0246: The type or namespace name 'Options' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\FramReinMaker.cs(137,22,137,34): error CS0246: The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\FramReinMaker.cs(148,22,148,35): error CS0246: The type or namespace name 'RebarHookType' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\FramReinMaker.cs(156,22,156,35): error CS0246: The type or namespace name 'RebarHookType' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\FramReinMaker.cs(164,22,164,35): error CS0246: The type or namespace name 'RebarHookType' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\Command.cs(41,28,41,44): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\FramReinMaker.cs(263,57,263,71): error CS0246: The type or namespace name 'RebarContainer' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\FramReinMaker.cs(263,78,263,90): error CS0246: The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\FramReinMaker.cs(263,102,263,115): error CS0246: The type or namespace name 'RebarHookType' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\FramReinMaker.cs(263,127,263,140): error CS0246: The type or namespace name 'RebarHookType' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\FramReinMaker.cs(264,82,264,102): error CS0246: The type or namespace name 'RebarHookOrientation' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\FramReinMaker.cs(264,116,264,136): error CS0246: The type or namespace name 'RebarHookOrientation' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\FramReinMaker.cs(263,19,263,37): error CS0246: The type or namespace name 'RebarContainerItem' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\FramReinMaker.cs(284,35,284,54): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\FramReinMaker.cs(302,36,302,55): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\FramReinMaker.cs(233,33,233,52): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\FramReinMaker.cs(233,66,233,80): error CS0246: The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\FramReinMaker.cs(60,19,60,27): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\FramReinMaker.cs(65,19,65,33): error CS0246: The type or namespace name 'FamilyInstance' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\FramReinMaker.cs(70,24,70,36): error CS0246: The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\FramReinMaker.cs(71,24,71,36): error CS0246: The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\Command.cs(38,6,38,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\Command.cs(39,6,39,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\Command.cs(40,6,40,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\Command.cs(38,44,38,52): error CS0103: The name 'Autodesk' does not exist in the current context
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\Command.cs(39,45,39,53): error CS0103: The name 'Autodesk' does not exist in the current context
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\Command.cs(40,43,40,51): error CS0103: The name 'Autodesk' does not exist in the current context
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\FramReinMaker.cs(72,24,72,36): error CS0246: The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\FramReinMaker.cs(74,24,74,36): error CS0246: The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\Command.cs(59,49,59,68): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\Command.cs(59,102,59,110): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\Command.cs(59,16,59,24): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\FramReinMaker.cs(75,24,75,36): error CS0246: The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\FramReinMaker.cs(76,24,76,36): error CS0246: The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\FramReinMaker.cs(77,24,77,36): error CS0246: The type or namespace name 'RebarBarType' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\FramReinMaker.cs(82,24,82,37): error CS0246: The type or namespace name 'RebarHookType' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\FramReinMaker.cs(83,24,83,37): error CS0246: The type or namespace name 'RebarHookType' could not be found (are you missing a using directive or an assembly reference?)
178>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarContainerAnyShapeType\CS\FramReinMaker.cs(84,24,84,37): error CS0246: The type or namespace name 'RebarHookType' could not be found (are you missing a using directive or an assembly reference?)
180>------ Rebuild All started: Project: PlacementOptions, Configuration: Debug Any CPU ------
179>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
179>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
179>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
179>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CapitalizeAllTextNotes\CS\Command.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
179>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CapitalizeAllTextNotes\CS\Command.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
179>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CapitalizeAllTextNotes\CS\Command.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
179>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CapitalizeAllTextNotes\CS\Command.cs(40,27,40,43): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
179>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CapitalizeAllTextNotes\CS\Command.cs(38,5,38,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
179>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CapitalizeAllTextNotes\CS\Command.cs(39,5,39,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
179>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CapitalizeAllTextNotes\CS\Command.cs(38,43,38,51): error CS0103: The name 'Autodesk' does not exist in the current context
179>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CapitalizeAllTextNotes\CS\Command.cs(39,44,39,52): error CS0103: The name 'Autodesk' does not exist in the current context
179>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CapitalizeAllTextNotes\CS\Command.cs(58,37,58,56): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
179>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CapitalizeAllTextNotes\CS\Command.cs(59,33,59,43): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
179>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CapitalizeAllTextNotes\CS\Command.cs(58,22,58,28): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
181>------ Rebuild All started: Project: BRepBuilderExample, Configuration: Debug Any CPU ------
180>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
180>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
180>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
180>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlacementOptions\CS\Command.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
180>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlacementOptions\CS\Command.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
180>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlacementOptions\CS\Command.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
180>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlacementOptions\CS\FacebasedForm.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
180>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlacementOptions\CS\FacebasedForm.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
180>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlacementOptions\CS\SketchbasedForm.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
180>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlacementOptions\CS\SketchbasedForm.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
180>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlacementOptions\CS\Command.cs(41,28,41,44): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
180>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlacementOptions\CS\Command.cs(39,6,39,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
180>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlacementOptions\CS\Command.cs(40,6,40,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
180>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlacementOptions\CS\Command.cs(39,44,39,52): error CS0103: The name 'Autodesk' does not exist in the current context
180>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlacementOptions\CS\Command.cs(40,45,40,53): error CS0103: The name 'Autodesk' does not exist in the current context
180>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlacementOptions\CS\Command.cs(59,39,59,58): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
180>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlacementOptions\CS\Command.cs(60,35,60,45): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
180>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlacementOptions\CS\Command.cs(59,24,59,30): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
180>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlacementOptions\CS\Command.cs(129,59,129,67): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
180>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlacementOptions\CS\Command.cs(129,78,129,93): error CS0246: The type or namespace name 'BuiltInCategory' could not be found (are you missing a using directive or an assembly reference?)
180>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlacementOptions\CS\Command.cs(129,22,129,34): error CS0246: The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)
180>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlacementOptions\CS\FacebasedForm.cs(71,16,71,55): error CS0246: The type or namespace name 'PromptForFamilyInstancePlacementOptions' could not be found (are you missing a using directive or an assembly reference?)
180>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlacementOptions\CS\FacebasedForm.cs(82,16,82,28): error CS0246: The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)
180>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlacementOptions\CS\FacebasedForm.cs(49,35,49,47): error CS0246: The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)
180>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlacementOptions\CS\FacebasedForm.cs(42,14,42,26): error CS0246: The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)
180>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlacementOptions\CS\FacebasedForm.cs(43,9,43,21): error CS0246: The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)
180>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlacementOptions\CS\FacebasedForm.cs(44,9,44,48): error CS0246: The type or namespace name 'PromptForFamilyInstancePlacementOptions' could not be found (are you missing a using directive or an assembly reference?)
180>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlacementOptions\CS\SketchbasedForm.cs(71,16,71,55): error CS0246: The type or namespace name 'PromptForFamilyInstancePlacementOptions' could not be found (are you missing a using directive or an assembly reference?)
180>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlacementOptions\CS\SketchbasedForm.cs(82,16,82,28): error CS0246: The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)
180>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlacementOptions\CS\SketchbasedForm.cs(49,37,49,49): error CS0246: The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)
180>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlacementOptions\CS\SketchbasedForm.cs(42,14,42,26): error CS0246: The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)
180>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlacementOptions\CS\SketchbasedForm.cs(43,9,43,21): error CS0246: The type or namespace name 'FamilySymbol' could not be found (are you missing a using directive or an assembly reference?)
180>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PlacementOptions\CS\SketchbasedForm.cs(44,9,44,48): error CS0246: The type or namespace name 'PromptForFamilyInstancePlacementOptions' could not be found (are you missing a using directive or an assembly reference?)
182>------ Rebuild All started: Project: RebarFreeForm, Configuration: Debug Any CPU ------
182>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
182>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
182>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
182>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\AddSharedParams.cs(1,7,1,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
182>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\AddSharedParams.cs(2,7,2,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
182>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\Application.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
182>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\Application.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
182>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\Application.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
182>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\Application.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
182>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\Application.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
182>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\Application.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
182>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\Application.cs(34,7,34,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
182>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\Command.cs(22,7,22,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
182>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\Command.cs(23,7,23,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
182>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\Command.cs(24,7,24,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
182>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\Command.cs(25,7,25,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
182>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\CurveElementRegenUpdater.cs(3,22,3,30): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
182>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\CurveElementRegenUpdater.cs(4,20,4,28): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
182>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\CurveElementRegenUpdater.cs(2,7,2,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
182>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\CurveElementRegenUpdater.cs(8,7,8,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
182>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\RebarUpdateServer.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
182>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\RebarUpdateServer.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
182>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\RebarUpdateServer.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
182>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\RebarUpdateServer.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
182>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\AddSharedParams.cs(19,36,19,52): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
182>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\CurveElementRegenUpdater.cs(16,38,16,46): error CS0246: The type or namespace name 'IUpdater' could not be found (are you missing a using directive or an assembly reference?)
182>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\CurveElementRegenUpdater.cs(26,29,26,40): error CS0246: The type or namespace name 'UpdaterData' could not be found (are you missing a using directive or an assembly reference?)
182>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\CurveElementRegenUpdater.cs(69,16,69,30): error CS0246: The type or namespace name 'ChangePriority' could not be found (are you missing a using directive or an assembly reference?)
182>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\CurveElementRegenUpdater.cs(74,16,74,25): error CS0246: The type or namespace name 'UpdaterId' could not be found (are you missing a using directive or an assembly reference?)
182>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\AddSharedParams.cs(17,6,17,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
182>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\AddSharedParams.cs(18,6,18,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
182>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\AddSharedParams.cs(17,44,17,52): error CS0103: The name 'Autodesk' does not exist in the current context
182>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\AddSharedParams.cs(18,45,18,53): error CS0103: The name 'Autodesk' does not exist in the current context
182>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\CurveElementRegenUpdater.cs(21,41,21,48): error CS0246: The type or namespace name 'AddInId' could not be found (are you missing a using directive or an assembly reference?)
182>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\CurveElementRegenUpdater.cs(18,16,18,23): error CS0246: The type or namespace name 'AddInId' could not be found (are you missing a using directive or an assembly reference?)
182>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\CurveElementRegenUpdater.cs(19,16,19,25): error CS0246: The type or namespace name 'UpdaterId' could not be found (are you missing a using directive or an assembly reference?)
182>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\AddSharedParams.cs(34,39,34,58): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
182>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\AddSharedParams.cs(34,92,34,102): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
182>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\AddSharedParams.cs(34,24,34,30): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
182>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\AddSharedParams.cs(62,45,62,64): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
182>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\AddSharedParams.cs(62,96,62,109): error CS0246: The type or namespace name 'ParameterType' could not be found (are you missing a using directive or an assembly reference?)
182>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\RebarUpdateServer.cs(47,14,47,18): error CS0246: The type or namespace name 'Face' could not be found (are you missing a using directive or an assembly reference?)
182>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\RebarUpdateServer.cs(49,14,49,23): error CS0246: The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)
182>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\AddSharedParams.cs(121,43,121,51): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
182>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\Application.cs(43,32,43,52): error CS0246: The type or namespace name 'IExternalApplication' could not be found (are you missing a using directive or an assembly reference?)
182>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\RebarUpdateServer.cs(70,30,70,38): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
182>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\RebarUpdateServer.cs(92,14,92,31): error CS0246: The type or namespace name 'ExternalServiceId' could not be found (are you missing a using directive or an assembly reference?)
182>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\Application.cs(41,6,41,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
182>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\Application.cs(42,6,42,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
182>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\Application.cs(41,44,41,52): error CS0103: The name 'Autodesk' does not exist in the current context
182>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\Application.cs(42,45,42,53): error CS0103: The name 'Autodesk' does not exist in the current context
182>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\RebarUpdateServer.cs(127,36,127,52): error CS0246: The type or namespace name 'RebarHandlesData' could not be found (are you missing a using directive or an assembly reference?)
182>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\Application.cs(57,32,57,55): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
182>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\Application.cs(57,14,57,20): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
182>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\RebarUpdateServer.cs(144,38,144,61): error CS0246: The type or namespace name 'RebarHandlePositionData' could not be found (are you missing a using directive or an assembly reference?)
182>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\Application.cs(68,31,68,54): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
182>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\Application.cs(68,14,68,20): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
182>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\RebarUpdateServer.cs(164,39,164,58): error CS0246: The type or namespace name 'RebarHandleNameData' could not be found (are you missing a using directive or an assembly reference?)
182>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\RebarUpdateServer.cs(197,34,197,49): error CS0246: The type or namespace name 'RebarCurvesData' could not be found (are you missing a using directive or an assembly reference?)
182>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\RebarUpdateServer.cs(346,36,346,55): error CS0246: The type or namespace name 'RebarTrimExtendData' could not be found (are you missing a using directive or an assembly reference?)
182>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\Command.cs(36,28,36,44): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
182>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\RebarUpdateServer.cs(481,31,481,52): error CS0246: The type or namespace name 'RebarUpdateCurvesData' could not be found (are you missing a using directive or an assembly reference?)
182>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\RebarUpdateServer.cs(481,9,481,14): error CS0246: The type or namespace name 'Rebar' could not be found (are you missing a using directive or an assembly reference?)
182>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\RebarUpdateServer.cs(487,46,487,51): error CS0246: The type or namespace name 'Rebar' could not be found (are you missing a using directive or an assembly reference?)
182>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\RebarUpdateServer.cs(487,57,487,78): error CS0246: The type or namespace name 'RebarUpdateCurvesData' could not be found (are you missing a using directive or an assembly reference?)
182>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\RebarUpdateServer.cs(487,9,487,21): error CS0246: The type or namespace name 'CurveElement' could not be found (are you missing a using directive or an assembly reference?)
182>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\RebarUpdateServer.cs(501,58,501,79): error CS0246: The type or namespace name 'RebarUpdateCurvesData' could not be found (are you missing a using directive or an assembly reference?)
182>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\RebarUpdateServer.cs(501,92,501,107): error CS0246: The type or namespace name 'RebarConstraint' could not be found (are you missing a using directive or an assembly reference?)
182>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\Command.cs(34,5,34,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
182>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\Command.cs(35,6,35,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
182>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\Command.cs(34,43,34,51): error CS0103: The name 'Autodesk' does not exist in the current context
182>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\Command.cs(35,45,35,53): error CS0103: The name 'Autodesk' does not exist in the current context
182>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\RebarUpdateServer.cs(541,40,541,45): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
182>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\Command.cs(54,37,54,56): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
182>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\Command.cs(55,33,55,43): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
182>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\Command.cs(54,22,54,28): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
182>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\RebarUpdateServer.cs(598,33,598,38): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
182>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\RebarUpdateServer.cs(598,15,598,18): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
182>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\RebarUpdateServer.cs(622,36,622,41): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
182>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\RebarUpdateServer.cs(622,77,622,80): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
182>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\RebarUpdateServer.cs(651,32,651,37): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
182>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\RebarUpdateServer.cs(651,50,651,55): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
182>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\RebarUpdateServer.cs(651,67,651,82): error CS0246: The type or namespace name 'RebarLayoutRule' could not be found (are you missing a using directive or an assembly reference?)
182>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\RebarUpdateServer.cs(651,130,651,135): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
182>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\RebarUpdateServer.cs(651,145,651,150): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
182>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\RebarUpdateServer.cs(686,34,686,39): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
182>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\RebarUpdateServer.cs(686,54,686,59): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
182>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\RebarUpdateServer.cs(703,15,703,20): error CS0246: The type or namespace name 'Curve' could not be found (are you missing a using directive or an assembly reference?)
182>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\RebarUpdateServer.cs(728,52,728,67): error CS0246: The type or namespace name 'GeometryElement' could not be found (are you missing a using directive or an assembly reference?)
182>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\RebarFreeForm\CS\RebarUpdateServer.cs(728,85,728,94): error CS0246: The type or namespace name 'Transform' could not be found (are you missing a using directive or an assembly reference?)
183>------ Rebuild All started: Project: DuplicateGraphics, Configuration: Debug Any CPU ------
181>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
181>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
181>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
181>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\Application.cs(34,7,34,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
181>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\Application.cs(35,7,35,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
181>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\Application.cs(36,7,36,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
181>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\Application.cs(37,7,37,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
181>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\Application.cs(38,7,38,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
181>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\CreateCube.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
181>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\CreateCube.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
181>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\CreateCube.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
181>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\CreateNURBS.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
181>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\CreateNURBS.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
181>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\CreateNURBS.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
181>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\CreatePeriodic.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
181>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\CreatePeriodic.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
181>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\CreatePeriodic.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
181>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\CreateNURBS.cs(38,31,38,47): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
181>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\Application.cs(47,31,47,51): error CS0246: The type or namespace name 'IExternalApplication' could not be found (are you missing a using directive or an assembly reference?)
181>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\CreateNURBS.cs(37,5,37,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
181>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\CreateNURBS.cs(37,43,37,51): error CS0103: The name 'Autodesk' does not exist in the current context
181>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\CreateNURBS.cs(56,29,56,48): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
181>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\CreateNURBS.cs(56,82,56,92): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
181>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\CreateNURBS.cs(56,14,56,20): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
181>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\CreateNURBS.cs(87,15,87,26): error CS0246: The type or namespace name 'BRepBuilder' could not be found (are you missing a using directive or an assembly reference?)
181>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\CreateNURBS.cs(149,15,149,23): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
181>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\Application.cs(45,5,45,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
181>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\Application.cs(46,5,46,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
181>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\Application.cs(45,43,45,51): error CS0103: The name 'Autodesk' does not exist in the current context
181>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\Application.cs(46,44,46,52): error CS0103: The name 'Autodesk' does not exist in the current context
181>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\CreatePeriodic.cs(38,34,38,50): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
181>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\Application.cs(57,32,57,55): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
181>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\Application.cs(57,14,57,20): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
181>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\CreatePeriodic.cs(37,5,37,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
181>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\CreatePeriodic.cs(37,43,37,51): error CS0103: The name 'Autodesk' does not exist in the current context
181>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\Application.cs(67,31,67,54): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
181>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\Application.cs(67,14,67,20): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
181>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\CreatePeriodic.cs(56,29,56,48): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
181>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\CreatePeriodic.cs(56,82,56,92): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
181>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\CreatePeriodic.cs(56,14,56,20): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
181>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\CreatePeriodic.cs(82,66,82,77): error CS0246: The type or namespace name 'BRepBuilder' could not be found (are you missing a using directive or an assembly reference?)
181>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\CreatePeriodic.cs(259,15,259,23): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
181>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\Application.cs(82,32,82,55): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
181>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\CreateCube.cs(39,30,39,46): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
181>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\CreateCube.cs(38,5,38,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
181>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\CreateCube.cs(38,43,38,51): error CS0103: The name 'Autodesk' does not exist in the current context
181>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\CreateCube.cs(57,29,57,48): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
181>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\CreateCube.cs(57,82,57,92): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
181>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\CreateCube.cs(57,14,57,20): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
181>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\CreateCube.cs(92,15,92,26): error CS0246: The type or namespace name 'BRepBuilder' could not be found (are you missing a using directive or an assembly reference?)
181>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\GeometryAPI\BRepBuilderExample\CS\CreateCube.cs(216,15,216,23): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
184>------ Rebuild All started: Project: AppearanceAssetEditing, Configuration: Debug Any CPU ------
183>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
183>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
183>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
183>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\Application.cs(40,7,40,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
183>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\Application.cs(41,7,41,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
183>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\Application.cs(42,7,42,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
183>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\Application.cs(43,7,43,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
183>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\Application.cs(44,7,44,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
183>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\Command.cs(24,7,24,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
183>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\Command.cs(25,7,25,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
183>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\Command.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
183>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\RevitElementDrawingServer.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
183>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\RevitElementDrawingServer.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
183>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\RevitElementDrawingServer.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
183>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\RevitElementDrawingServer.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
183>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\Application.cs(55,32,55,52): error CS0246: The type or namespace name 'IExternalApplication' could not be found (are you missing a using directive or an assembly reference?)
183>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\Application.cs(53,6,53,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
183>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\Application.cs(54,6,54,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
183>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\Application.cs(53,44,53,52): error CS0103: The name 'Autodesk' does not exist in the current context
183>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\Application.cs(54,45,54,53): error CS0103: The name 'Autodesk' does not exist in the current context
183>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\Application.cs(64,31,64,54): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
183>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\Application.cs(64,14,64,20): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
183>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\Application.cs(90,32,90,55): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
183>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\Application.cs(90,14,90,20): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
183>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\Application.cs(103,52,103,76): error CS0246: The type or namespace name 'DocumentClosingEventArgs' could not be found (are you missing a using directive or an assembly reference?)
183>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\Application.cs(114,58,114,66): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
183>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\Application.cs(126,62,126,70): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
183>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\Application.cs(138,41,138,51): error CS0246: The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)
183>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\Application.cs(166,50,166,60): error CS0246: The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)
183>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\Application.cs(197,37,197,45): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
183>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\Application.cs(242,7,242,10): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
183>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\Application.cs(243,15,243,23): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
183>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\Command.cs(36,44,36,60): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
183>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\Command.cs(34,5,34,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
183>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\Command.cs(35,5,35,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
183>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\Command.cs(34,43,34,51): error CS0103: The name 'Autodesk' does not exist in the current context
183>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\Command.cs(35,44,35,52): error CS0103: The name 'Autodesk' does not exist in the current context
183>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\Command.cs(54,37,54,56): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
183>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\Command.cs(54,90,54,100): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
183>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\Command.cs(54,22,54,28): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
183>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\Command.cs(75,48,75,64): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
183>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\Command.cs(73,5,73,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
183>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\Command.cs(74,5,74,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
183>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\Command.cs(73,43,73,51): error CS0103: The name 'Autodesk' does not exist in the current context
183>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\Command.cs(74,44,74,52): error CS0103: The name 'Autodesk' does not exist in the current context
183>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\Command.cs(93,37,93,56): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
183>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\Command.cs(93,90,93,100): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
183>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\Command.cs(93,22,93,28): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
183>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\RevitElementDrawingServer.cs(39,38,39,60): error CS0246: The type or namespace name 'IDirectContext3DServer' could not be found (are you missing a using directive or an assembly reference?)
183>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\RevitElementDrawingServer.cs(52,14,52,31): error CS0246: The type or namespace name 'ExternalServiceId' could not be found (are you missing a using directive or an assembly reference?)
183>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\RevitElementDrawingServer.cs(67,30,67,38): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
183>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\RevitElementDrawingServer.cs(80,37,80,45): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
183>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\RevitElementDrawingServer.cs(80,14,80,21): error CS0246: The type or namespace name 'Outline' could not be found (are you missing a using directive or an assembly reference?)
183>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\RevitElementDrawingServer.cs(98,40,98,48): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
183>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\RevitElementDrawingServer.cs(101,31,101,39): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
183>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\RevitElementDrawingServer.cs(101,60,101,72): error CS0246: The type or namespace name 'DisplayStyle' could not be found (are you missing a using directive or an assembly reference?)
183>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\RevitElementDrawingServer.cs(152,50,152,65): error CS0246: The type or namespace name 'GeometryElement' could not be found (are you missing a using directive or an assembly reference?)
183>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\RevitElementDrawingServer.cs(152,76,152,88): error CS0246: The type or namespace name 'DisplayStyle' could not be found (are you missing a using directive or an assembly reference?)
183>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\RevitElementDrawingServer.cs(390,14,390,22): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
183>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\RevitElementDrawingServer.cs(41,40,41,50): error CS0246: The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)
183>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\RevitElementDrawingServer.cs(41,58,41,65): error CS0246: The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)
183>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\RevitElementDrawingServer.cs(41,72,41,75): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
183>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\RevitElementDrawingServer.cs(397,15,397,22): error CS0246: The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)
183>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\RevitElementDrawingServer.cs(398,15,398,18): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
183>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\RevitElementDrawingServer.cs(399,15,399,25): error CS0246: The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)
183>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\RevitElementDrawingServer.cs(410,26,410,30): error CS0246: The type or namespace name 'Mesh' could not be found (are you missing a using directive or an assembly reference?)
183>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\RevitElementDrawingServer.cs(410,37,410,40): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
183>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\RevitElementDrawingServer.cs(410,49,410,70): error CS0246: The type or namespace name 'ColorWithTransparency' could not be found (are you missing a using directive or an assembly reference?)
183>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\RevitElementDrawingServer.cs(417,17,417,21): error CS0246: The type or namespace name 'Mesh' could not be found (are you missing a using directive or an assembly reference?)
183>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\RevitElementDrawingServer.cs(418,17,418,20): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
183>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\RevitElementDrawingServer.cs(419,17,419,38): error CS0246: The type or namespace name 'ColorWithTransparency' could not be found (are you missing a using directive or an assembly reference?)
183>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\RevitElementDrawingServer.cs(433,34,433,46): error CS0246: The type or namespace name 'DisplayStyle' could not be found (are you missing a using directive or an assembly reference?)
183>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\RevitElementDrawingServer.cs(448,17,448,29): error CS0246: The type or namespace name 'DisplayStyle' could not be found (are you missing a using directive or an assembly reference?)
183>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\RevitElementDrawingServer.cs(450,17,450,33): error CS0246: The type or namespace name 'VertexFormatBits' could not be found (are you missing a using directive or an assembly reference?)
183>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\RevitElementDrawingServer.cs(453,28,453,31): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
183>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\RevitElementDrawingServer.cs(458,17,458,29): error CS0246: The type or namespace name 'VertexBuffer' could not be found (are you missing a using directive or an assembly reference?)
183>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\RevitElementDrawingServer.cs(459,17,459,28): error CS0246: The type or namespace name 'IndexBuffer' could not be found (are you missing a using directive or an assembly reference?)
183>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\RevitElementDrawingServer.cs(460,17,460,29): error CS0246: The type or namespace name 'VertexFormat' could not be found (are you missing a using directive or an assembly reference?)
183>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\RevitElementDrawingServer.cs(461,17,461,31): error CS0246: The type or namespace name 'EffectInstance' could not be found (are you missing a using directive or an assembly reference?)
183>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\DuplicateGraphics\CS\RevitElementDrawingServer.cs(426,44,426,56): error CS0246: The type or namespace name 'DisplayStyle' could not be found (are you missing a using directive or an assembly reference?)
185>------ Rebuild All started: Project: SampleCommandsSteelElements, Configuration: Debug Any CPU ------
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\VSProps\SDKSamples.Steel.targets(29,3): warning MSB4011: "C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Csharp.targets" cannot be imported again. It was already imported at "Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\VSProps\SDKSamples.targets (29,3)". This is most likely a build authoring error. This subsequent import will be ignored. [Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\SampleCommandsSteelElements.csproj]
185>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
185>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
185>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
185>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "ASObjectsMgd". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
185>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "ASGeometryMgd". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
185>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "ASCADLinkMgd". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
185>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "SteelConnectionsDB". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\BackgroundCalculation.cs(24,7,24,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\BackgroundCalculation.cs(25,7,25,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\BackgroundCalculation.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\BackgroundCalculation.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\BackgroundCalculation.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\BackgroundCalculation.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\BackgroundCalculation.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\BackgroundCalculation.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\BackgroundCalculation.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\RemoveSubelementsFromCustomConnection.cs(24,7,24,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\RemoveSubelementsFromCustomConnection.cs(25,7,25,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\RemoveSubelementsFromCustomConnection.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\RemoveSubelementsFromCustomConnection.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\RemoveElementsFromConnection.cs(24,7,24,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\RemoveElementsFromConnection.cs(25,7,25,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\RemoveElementsFromConnection.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\DeleteConnection.cs(24,7,24,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\DeleteConnection.cs(25,7,25,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\DeleteConnection.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateWeldPoint.cs(24,7,24,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateWeldPoint.cs(25,7,25,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateWeldPoint.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateWeldPoint.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateWeldPoint.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateWeldPoint.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateWeldPoint.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateWeldPoint.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateShortening.cs(24,7,24,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateShortening.cs(25,7,25,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateShortening.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateShortening.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateShortening.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateShortening.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateShortening.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateShearStudPattern.cs(24,7,24,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateShearStudPattern.cs(25,7,25,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateShearStudPattern.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateShearStudPattern.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateShearStudPattern.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateShearStudPattern.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateShearStudPattern.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreatePlateHole.cs(24,7,24,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreatePlateHole.cs(25,7,25,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreatePlateHole.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreatePlateHole.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreatePlateHole.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreatePlateHole.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreatePlateHole.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreatePlateHole.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreatePlateHole.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreatePlate.cs(24,7,24,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreatePlate.cs(25,7,25,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreatePlate.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreatePlate.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreatePlate.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreatePlate.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateCornerCut.cs(24,7,24,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateCornerCut.cs(25,7,25,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateCornerCut.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateCornerCut.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateCornerCut.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateCornerCut.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateCornerCut.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateCopeSkewed.cs(24,7,24,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateCopeSkewed.cs(25,7,25,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateCopeSkewed.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateCopeSkewed.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateCopeSkewed.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateCopeSkewed.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateCopeSkewed.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateContourCut.cs(24,7,24,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateContourCut.cs(25,7,25,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateContourCut.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateContourCut.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateContourCut.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateContourCut.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateContourCut.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateContourCut.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateBoltPattern.cs(24,7,24,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateBoltPattern.cs(25,7,25,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateBoltPattern.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateBoltPattern.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateBoltPattern.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateBoltPattern.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateBoltPattern.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateAnchorPattern.cs(24,7,24,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateAnchorPattern.cs(25,7,25,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateAnchorPattern.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateAnchorPattern.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateAnchorPattern.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateAnchorPattern.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateAnchorPattern.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\AddElementsToCustomConnection.cs(25,7,25,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\AddElementsToCustomConnection.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\AddElementsToCustomConnection.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\AddElementsToConnection.cs(24,7,24,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\AddElementsToConnection.cs(25,7,25,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\AddElementsToConnection.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\Functions.cs(32,21,32,29): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\Functions.cs(34,20,34,28): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\Functions.cs(23,7,23,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\Functions.cs(24,7,24,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\Functions.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\Functions.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\Functions.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\Functions.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\Functions.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\Functions.cs(35,7,35,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\Functions.cs(36,7,36,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\UpdateConnectionDetailedParameters.cs(7,7,7,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\UpdateConnectionDetailedParameters.cs(8,7,8,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
184>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
184>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\UpdateConnectionDetailedParameters.cs(9,7,9,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\UpdateConnectionDetailedParameters.cs(10,7,10,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\UpdateConnectionDetailedParameters.cs(11,7,11,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\UpdateConnectionDetailedParameters.cs(12,7,12,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\UpdateConnectionDetailedParameters.cs(13,7,13,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\UpdateConnectionDetailedParameters.cs(14,7,14,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\UpdateConnectionDetailedParameters.cs(15,7,15,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\BackgroundCalculation.cs(42,27,42,43): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\BackgroundCalculation.cs(39,5,39,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\BackgroundCalculation.cs(40,5,40,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\BackgroundCalculation.cs(41,5,41,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\BackgroundCalculation.cs(39,43,39,51): error CS0103: The name 'Autodesk' does not exist in the current context
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\BackgroundCalculation.cs(40,44,40,52): error CS0103: The name 'Autodesk' does not exist in the current context
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\BackgroundCalculation.cs(41,42,41,50): error CS0103: The name 'Autodesk' does not exist in the current context
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\BackgroundCalculation.cs(65,37,65,56): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\BackgroundCalculation.cs(66,33,66,43): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\BackgroundCalculation.cs(65,22,65,28): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\BackgroundCalculation.cs(108,48,108,63): error CS0246: The type or namespace name 'IdlingEventArgs' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\BackgroundCalculation.cs(135,37,135,40): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\BackgroundCalculation.cs(135,15,135,24): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\BackgroundCalculation.cs(45,15,45,24): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\BackgroundCalculation.cs(47,15,47,23): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\RemoveSubelementsFromCustomConnection.cs(41,27,41,43): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\RemoveSubelementsFromCustomConnection.cs(38,5,38,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\RemoveSubelementsFromCustomConnection.cs(39,5,39,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\RemoveSubelementsFromCustomConnection.cs(40,5,40,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\RemoveSubelementsFromCustomConnection.cs(38,43,38,51): error CS0103: The name 'Autodesk' does not exist in the current context
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\RemoveSubelementsFromCustomConnection.cs(39,44,39,52): error CS0103: The name 'Autodesk' does not exist in the current context
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\RemoveSubelementsFromCustomConnection.cs(40,42,40,50): error CS0103: The name 'Autodesk' does not exist in the current context
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\RemoveSubelementsFromCustomConnection.cs(59,37,59,56): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\RemoveSubelementsFromCustomConnection.cs(60,33,60,43): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\RemoveSubelementsFromCustomConnection.cs(59,22,59,28): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\RemoveElementsFromConnection.cs(39,27,39,43): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\RemoveElementsFromConnection.cs(36,5,36,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\RemoveElementsFromConnection.cs(37,5,37,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\RemoveElementsFromConnection.cs(38,5,38,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\RemoveElementsFromConnection.cs(36,43,36,51): error CS0103: The name 'Autodesk' does not exist in the current context
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\RemoveElementsFromConnection.cs(37,44,37,52): error CS0103: The name 'Autodesk' does not exist in the current context
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\RemoveElementsFromConnection.cs(38,42,38,50): error CS0103: The name 'Autodesk' does not exist in the current context
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\RemoveElementsFromConnection.cs(57,37,57,56): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\RemoveElementsFromConnection.cs(58,33,58,43): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\RemoveElementsFromConnection.cs(57,22,57,28): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\DeleteConnection.cs(37,27,37,43): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\DeleteConnection.cs(34,5,34,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\DeleteConnection.cs(35,5,35,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\DeleteConnection.cs(36,5,36,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\DeleteConnection.cs(34,43,34,51): error CS0103: The name 'Autodesk' does not exist in the current context
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\DeleteConnection.cs(35,44,35,52): error CS0103: The name 'Autodesk' does not exist in the current context
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\DeleteConnection.cs(36,42,36,50): error CS0103: The name 'Autodesk' does not exist in the current context
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\DeleteConnection.cs(55,37,55,56): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\DeleteConnection.cs(56,33,56,43): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\DeleteConnection.cs(55,22,55,28): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateWeldPoint.cs(43,27,43,43): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateWeldPoint.cs(40,5,40,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateWeldPoint.cs(41,5,41,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateWeldPoint.cs(42,5,42,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateWeldPoint.cs(40,43,40,51): error CS0103: The name 'Autodesk' does not exist in the current context
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateWeldPoint.cs(41,44,41,52): error CS0103: The name 'Autodesk' does not exist in the current context
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateWeldPoint.cs(42,42,42,50): error CS0103: The name 'Autodesk' does not exist in the current context
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateWeldPoint.cs(61,37,61,56): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateWeldPoint.cs(62,33,62,43): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateWeldPoint.cs(61,22,61,28): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateShortening.cs(43,27,43,43): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateShortening.cs(40,5,40,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateShortening.cs(41,5,41,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateShortening.cs(42,5,42,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateShortening.cs(40,43,40,51): error CS0103: The name 'Autodesk' does not exist in the current context
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateShortening.cs(41,44,41,52): error CS0103: The name 'Autodesk' does not exist in the current context
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateShortening.cs(42,42,42,50): error CS0103: The name 'Autodesk' does not exist in the current context
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateShortening.cs(61,37,61,56): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateShortening.cs(62,33,62,43): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateShortening.cs(61,22,61,28): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateShearStudPattern.cs(42,27,42,43): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateShearStudPattern.cs(39,5,39,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateShearStudPattern.cs(40,5,40,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateShearStudPattern.cs(41,5,41,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateShearStudPattern.cs(39,43,39,51): error CS0103: The name 'Autodesk' does not exist in the current context
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateShearStudPattern.cs(40,44,40,52): error CS0103: The name 'Autodesk' does not exist in the current context
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateShearStudPattern.cs(41,42,41,50): error CS0103: The name 'Autodesk' does not exist in the current context
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateShearStudPattern.cs(60,37,60,56): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateShearStudPattern.cs(61,33,61,43): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateShearStudPattern.cs(60,22,60,28): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreatePlateHole.cs(43,27,43,43): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreatePlateHole.cs(40,5,40,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreatePlateHole.cs(41,5,41,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreatePlateHole.cs(42,5,42,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreatePlateHole.cs(40,43,40,51): error CS0103: The name 'Autodesk' does not exist in the current context
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreatePlateHole.cs(41,44,41,52): error CS0103: The name 'Autodesk' does not exist in the current context
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreatePlateHole.cs(42,42,42,50): error CS0103: The name 'Autodesk' does not exist in the current context
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreatePlateHole.cs(61,37,61,56): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreatePlateHole.cs(62,33,62,43): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreatePlateHole.cs(61,22,61,28): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreatePlate.cs(40,27,40,43): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreatePlate.cs(37,5,37,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreatePlate.cs(38,5,38,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreatePlate.cs(39,5,39,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreatePlate.cs(37,43,37,51): error CS0103: The name 'Autodesk' does not exist in the current context
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreatePlate.cs(38,44,38,52): error CS0103: The name 'Autodesk' does not exist in the current context
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreatePlate.cs(39,42,39,50): error CS0103: The name 'Autodesk' does not exist in the current context
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreatePlate.cs(58,37,58,56): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreatePlate.cs(59,33,59,43): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreatePlate.cs(58,22,58,28): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateCornerCut.cs(43,27,43,43): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateCornerCut.cs(40,5,40,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateCornerCut.cs(41,5,41,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateCornerCut.cs(42,5,42,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateCornerCut.cs(40,43,40,51): error CS0103: The name 'Autodesk' does not exist in the current context
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateCornerCut.cs(41,44,41,52): error CS0103: The name 'Autodesk' does not exist in the current context
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateCornerCut.cs(42,42,42,50): error CS0103: The name 'Autodesk' does not exist in the current context
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateCornerCut.cs(61,37,61,56): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateCornerCut.cs(62,33,62,43): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateCornerCut.cs(61,22,61,28): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateCopeSkewed.cs(43,27,43,43): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateCopeSkewed.cs(40,5,40,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateCopeSkewed.cs(41,5,41,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateCopeSkewed.cs(42,5,42,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateCopeSkewed.cs(40,43,40,51): error CS0103: The name 'Autodesk' does not exist in the current context
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateCopeSkewed.cs(41,44,41,52): error CS0103: The name 'Autodesk' does not exist in the current context
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateCopeSkewed.cs(42,42,42,50): error CS0103: The name 'Autodesk' does not exist in the current context
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateCopeSkewed.cs(61,37,61,56): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateCopeSkewed.cs(62,33,62,43): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateCopeSkewed.cs(61,22,61,28): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateContourCut.cs(44,27,44,43): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateContourCut.cs(41,5,41,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateContourCut.cs(42,5,42,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateContourCut.cs(43,5,43,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateContourCut.cs(41,43,41,51): error CS0103: The name 'Autodesk' does not exist in the current context
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateContourCut.cs(42,44,42,52): error CS0103: The name 'Autodesk' does not exist in the current context
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateContourCut.cs(43,42,43,50): error CS0103: The name 'Autodesk' does not exist in the current context
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateContourCut.cs(62,37,62,56): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateContourCut.cs(63,33,63,43): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateContourCut.cs(62,22,62,28): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateBoltPattern.cs(43,27,43,43): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateBoltPattern.cs(40,5,40,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateBoltPattern.cs(41,5,41,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateBoltPattern.cs(42,5,42,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateBoltPattern.cs(40,43,40,51): error CS0103: The name 'Autodesk' does not exist in the current context
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateBoltPattern.cs(41,44,41,52): error CS0103: The name 'Autodesk' does not exist in the current context
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateBoltPattern.cs(42,42,42,50): error CS0103: The name 'Autodesk' does not exist in the current context
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateBoltPattern.cs(61,37,61,56): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateBoltPattern.cs(62,33,62,43): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateBoltPattern.cs(61,22,61,28): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateAnchorPattern.cs(44,27,44,43): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateAnchorPattern.cs(41,5,41,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateAnchorPattern.cs(42,5,42,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateAnchorPattern.cs(43,5,43,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateAnchorPattern.cs(41,43,41,51): error CS0103: The name 'Autodesk' does not exist in the current context
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateAnchorPattern.cs(42,44,42,52): error CS0103: The name 'Autodesk' does not exist in the current context
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateAnchorPattern.cs(43,42,43,50): error CS0103: The name 'Autodesk' does not exist in the current context
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateAnchorPattern.cs(62,37,62,56): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateAnchorPattern.cs(63,33,63,43): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\CreateAnchorPattern.cs(62,22,62,28): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\AddElementsToCustomConnection.cs(42,27,42,43): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\AddElementsToCustomConnection.cs(39,5,39,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\AddElementsToCustomConnection.cs(40,5,40,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\AddElementsToCustomConnection.cs(41,5,41,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\AddElementsToCustomConnection.cs(39,43,39,51): error CS0103: The name 'Autodesk' does not exist in the current context
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\AddElementsToCustomConnection.cs(40,44,40,52): error CS0103: The name 'Autodesk' does not exist in the current context
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\AddElementsToCustomConnection.cs(41,42,41,50): error CS0103: The name 'Autodesk' does not exist in the current context
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\AddElementsToCustomConnection.cs(60,37,60,56): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\AddElementsToCustomConnection.cs(61,33,61,43): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\AddElementsToCustomConnection.cs(60,22,60,28): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\AddElementsToConnection.cs(41,27,41,43): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\AddElementsToConnection.cs(38,5,38,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\AddElementsToConnection.cs(39,5,39,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\AddElementsToConnection.cs(40,5,40,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\AddElementsToConnection.cs(38,43,38,51): error CS0103: The name 'Autodesk' does not exist in the current context
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\AddElementsToConnection.cs(39,44,39,52): error CS0103: The name 'Autodesk' does not exist in the current context
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\AddElementsToConnection.cs(40,42,40,50): error CS0103: The name 'Autodesk' does not exist in the current context
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\AddElementsToConnection.cs(59,39,59,58): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\AddElementsToConnection.cs(60,35,60,45): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\AddElementsToConnection.cs(59,24,59,30): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\UpdateConnectionDetailedParameters.cs(26,27,26,43): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\UpdateConnectionDetailedParameters.cs(23,5,23,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\UpdateConnectionDetailedParameters.cs(24,5,24,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\UpdateConnectionDetailedParameters.cs(25,5,25,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\UpdateConnectionDetailedParameters.cs(23,43,23,51): error CS0103: The name 'Autodesk' does not exist in the current context
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\UpdateConnectionDetailedParameters.cs(24,44,24,52): error CS0103: The name 'Autodesk' does not exist in the current context
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\UpdateConnectionDetailedParameters.cs(25,42,25,50): error CS0103: The name 'Autodesk' does not exist in the current context
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\UpdateConnectionDetailedParameters.cs(44,37,44,56): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\UpdateConnectionDetailedParameters.cs(44,90,44,100): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\UpdateConnectionDetailedParameters.cs(44,22,44,28): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\Functions.cs(53,66,53,76): error CS0246: The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\Functions.cs(53,21,53,48): error CS0246: The type or namespace name 'StructuralConnectionHandler' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\Functions.cs(74,62,74,72): error CS0246: The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\Functions.cs(74,26,74,35): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\Functions.cs(95,68,95,78): error CS0246: The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\Functions.cs(95,26,95,35): error CS0246: The type or namespace name 'Reference' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\Functions.cs(118,64,118,73): error CS0246: The type or namespace name 'Reference' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\Functions.cs(118,20,118,31): error CS0246: The type or namespace name 'FilerObject' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\Functions.cs(138,80,138,89): error CS0246: The type or namespace name 'Reference' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\Functions.cs(138,25,138,36): error CS0246: The type or namespace name 'FilerObject' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\Functions.cs(155,48,155,52): error CS0246: The type or namespace name 'Beam' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\Functions.cs(155,61,155,64): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\Functions.cs(155,21,155,25): error CS0246: The type or namespace name 'Beam' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\Functions.cs(172,50,172,54): error CS0246: The type or namespace name 'Beam' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\Functions.cs(172,63,172,71): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\Functions.cs(172,21,172,25): error CS0246: The type or namespace name 'Beam' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\Functions.cs(185,42,185,45): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\Functions.cs(185,21,185,28): error CS0246: The type or namespace name 'Point3d' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\Functions.cs(196,48,196,64): error CS0246: The type or namespace name 'ISelectionFilter' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\Functions.cs(214,32,214,39): error CS0246: The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\Functions.cs(224,34,224,43): error CS0246: The type or namespace name 'Reference' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\Functions.cs(224,51,224,54): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\Functions.cs(204,50,204,65): error CS0246: The type or namespace name 'LogicalOrFilter' could not be found (are you missing a using directive or an assembly reference?)
185>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\Functions.cs(198,7,198,22): error CS0246: The type or namespace name 'LogicalOrFilter' could not be found (are you missing a using directive or an assembly reference?)
184>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
184>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\VSProps\SDKSamples.Steel.targets(29,3): warning MSB4011: "C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Csharp.targets" cannot be imported again. It was already imported at "Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\VSProps\SDKSamples.targets (29,3)". This is most likely a build authoring error. This subsequent import will be ignored. [Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\SampleCommandsSteelElements\CS\SampleCommandsSteelElements.csproj]
184>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AppearanceAssetEditing\CS\Application.cs(24,7,24,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
184>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AppearanceAssetEditing\CS\Application.cs(25,7,25,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
184>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AppearanceAssetEditing\CS\Application.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
184>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AppearanceAssetEditing\CS\Application.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
184>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AppearanceAssetEditing\CS\Application.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
184>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AppearanceAssetEditing\CS\Command.cs(24,7,24,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
184>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AppearanceAssetEditing\CS\Command.cs(25,7,25,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
184>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AppearanceAssetEditing\CS\RequestHandler.cs(24,7,24,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
184>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AppearanceAssetEditing\CS\RequestHandler.cs(25,7,25,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
184>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AppearanceAssetEditing\CS\RequestHandler.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
184>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AppearanceAssetEditing\CS\RequestHandler.cs(27,7,27,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
184>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AppearanceAssetEditing\CS\Application.cs(35,31,35,51): error CS0246: The type or namespace name 'IExternalApplication' could not be found (are you missing a using directive or an assembly reference?)
184>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AppearanceAssetEditing\CS\Application.cs(55,32,55,55): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
184>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AppearanceAssetEditing\CS\Application.cs(55,14,55,20): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
184>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AppearanceAssetEditing\CS\Application.cs(74,31,74,54): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
184>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AppearanceAssetEditing\CS\Application.cs(74,14,74,20): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
184>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AppearanceAssetEditing\CS\Application.cs(89,28,89,41): error CS0246: The type or namespace name 'UIApplication' could not be found (are you missing a using directive or an assembly reference?)
184>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AppearanceAssetEditing\CS\Application.cs(111,32,111,37): error CS0246: The type or namespace name 'Color' could not be found (are you missing a using directive or an assembly reference?)
184>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AppearanceAssetEditing\CS\Application.cs(111,46,111,51): error CS0246: The type or namespace name 'Color' could not be found (are you missing a using directive or an assembly reference?)
184>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AppearanceAssetEditing\CS\Application.cs(301,48,301,63): error CS0246: The type or namespace name 'IdlingEventArgs' could not be found (are you missing a using directive or an assembly reference?)
184>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AppearanceAssetEditing\CS\Application.cs(43,7,43,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
184>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AppearanceAssetEditing\CS\Application.cs(44,7,44,15): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
184>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AppearanceAssetEditing\CS\Application.cs(45,7,45,15): error CS0246: The type or namespace name 'Material' could not be found (are you missing a using directive or an assembly reference?)
184>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AppearanceAssetEditing\CS\Application.cs(46,7,46,16): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
184>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AppearanceAssetEditing\CS\Application.cs(124,52,124,68): error CS0246: The type or namespace name 'ISelectionFilter' could not be found (are you missing a using directive or an assembly reference?)
184>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AppearanceAssetEditing\CS\Application.cs(128,35,128,42): error CS0246: The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)
184>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AppearanceAssetEditing\CS\Application.cs(134,37,134,46): error CS0246: The type or namespace name 'Reference' could not be found (are you missing a using directive or an assembly reference?)
184>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AppearanceAssetEditing\CS\Application.cs(134,54,134,57): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
184>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AppearanceAssetEditing\CS\Application.cs(126,10,126,18): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
184>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AppearanceAssetEditing\CS\Command.cs(35,27,35,43): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
184>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AppearanceAssetEditing\CS\Command.cs(32,5,32,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
184>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AppearanceAssetEditing\CS\Command.cs(33,5,33,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
184>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AppearanceAssetEditing\CS\Command.cs(34,5,34,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
184>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AppearanceAssetEditing\CS\Command.cs(32,43,32,51): error CS0103: The name 'Autodesk' does not exist in the current context
184>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AppearanceAssetEditing\CS\Command.cs(33,44,33,52): error CS0103: The name 'Autodesk' does not exist in the current context
184>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AppearanceAssetEditing\CS\Command.cs(34,42,34,50): error CS0103: The name 'Autodesk' does not exist in the current context
184>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AppearanceAssetEditing\CS\Command.cs(53,37,53,56): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
184>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AppearanceAssetEditing\CS\Command.cs(54,33,54,43): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
184>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AppearanceAssetEditing\CS\Command.cs(53,22,53,28): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
186>------ Rebuild All started: Project: AttachedDetailGroup, Configuration: Debug Any CPU ------
187>------ Rebuild All started: Project: CreateTrianglesTopography, Configuration: Debug Any CPU ------
186>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
186>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
186>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
186>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AttachedDetailGroup\CS\Application.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
186>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AttachedDetailGroup\CS\GroupHelper.cs(23,7,23,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
186>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AttachedDetailGroup\CS\GroupHelper.cs(24,7,24,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
186>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AttachedDetailGroup\CS\AttachedDetailGroupShowAllCommand.cs(23,7,23,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
186>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AttachedDetailGroup\CS\AttachedDetailGroupShowAllCommand.cs(24,7,24,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
186>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AttachedDetailGroup\CS\AttachedDetailGroupHideAllCommand.cs(23,7,23,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
186>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AttachedDetailGroup\CS\AttachedDetailGroupHideAllCommand.cs(24,7,24,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
186>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AttachedDetailGroup\CS\Application.cs(35,31,35,51): error CS0246: The type or namespace name 'IExternalApplication' could not be found (are you missing a using directive or an assembly reference?)
186>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AttachedDetailGroup\CS\Application.cs(33,5,33,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
186>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AttachedDetailGroup\CS\Application.cs(34,5,34,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
186>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AttachedDetailGroup\CS\Application.cs(33,43,33,51): error CS0103: The name 'Autodesk' does not exist in the current context
186>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AttachedDetailGroup\CS\Application.cs(34,44,34,52): error CS0103: The name 'Autodesk' does not exist in the current context
186>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AttachedDetailGroup\CS\Application.cs(44,32,44,55): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
186>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AttachedDetailGroup\CS\Application.cs(44,14,44,20): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
186>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AttachedDetailGroup\CS\Application.cs(54,31,54,54): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
186>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AttachedDetailGroup\CS\Application.cs(54,14,54,20): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
186>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AttachedDetailGroup\CS\Application.cs(66,51,66,74): error CS0246: The type or namespace name 'UIControlledApplication' could not be found (are you missing a using directive or an assembly reference?)
186>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AttachedDetailGroup\CS\Application.cs(97,49,97,59): error CS0246: The type or namespace name 'PushButton' could not be found (are you missing a using directive or an assembly reference?)
186>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AttachedDetailGroup\CS\GroupHelper.cs(40,41,40,51): error CS0246: The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)
186>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AttachedDetailGroup\CS\GroupHelper.cs(40,63,40,68): error CS0246: The type or namespace name 'Group' could not be found (are you missing a using directive or an assembly reference?)
186>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AttachedDetailGroup\CS\GroupHelper.cs(81,47,81,52): error CS0246: The type or namespace name 'Group' could not be found (are you missing a using directive or an assembly reference?)
186>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AttachedDetailGroup\CS\GroupHelper.cs(81,65,81,73): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
186>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AttachedDetailGroup\CS\GroupHelper.cs(81,79,81,83): error CS0246: The type or namespace name 'View' could not be found (are you missing a using directive or an assembly reference?)
186>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AttachedDetailGroup\CS\GroupHelper.cs(100,47,100,52): error CS0246: The type or namespace name 'Group' could not be found (are you missing a using directive or an assembly reference?)
186>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AttachedDetailGroup\CS\GroupHelper.cs(100,65,100,73): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
186>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AttachedDetailGroup\CS\GroupHelper.cs(100,79,100,83): error CS0246: The type or namespace name 'View' could not be found (are you missing a using directive or an assembly reference?)
186>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AttachedDetailGroup\CS\AttachedDetailGroupShowAllCommand.cs(32,46,32,62): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
186>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AttachedDetailGroup\CS\AttachedDetailGroupShowAllCommand.cs(31,5,31,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
186>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AttachedDetailGroup\CS\AttachedDetailGroupShowAllCommand.cs(31,43,31,51): error CS0103: The name 'Autodesk' does not exist in the current context
186>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AttachedDetailGroup\CS\AttachedDetailGroupShowAllCommand.cs(43,29,43,48): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
186>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AttachedDetailGroup\CS\AttachedDetailGroupShowAllCommand.cs(43,82,43,90): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
186>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AttachedDetailGroup\CS\AttachedDetailGroupShowAllCommand.cs(43,14,43,20): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
186>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AttachedDetailGroup\CS\AttachedDetailGroupHideAllCommand.cs(32,46,32,62): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
186>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AttachedDetailGroup\CS\AttachedDetailGroupHideAllCommand.cs(31,5,31,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
186>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AttachedDetailGroup\CS\AttachedDetailGroupHideAllCommand.cs(31,43,31,51): error CS0103: The name 'Autodesk' does not exist in the current context
186>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AttachedDetailGroup\CS\AttachedDetailGroupHideAllCommand.cs(43,29,43,48): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
186>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AttachedDetailGroup\CS\AttachedDetailGroupHideAllCommand.cs(43,82,43,90): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
186>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\AttachedDetailGroup\CS\AttachedDetailGroupHideAllCommand.cs(43,14,43,20): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
188>------ Rebuild All started: Project: PathOfTravel, Configuration: Debug Any CPU ------
187>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
187>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
187>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
187>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateTrianglesTopography\CS\Command.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
187>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateTrianglesTopography\CS\Command.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
187>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateTrianglesTopography\CS\Command.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
187>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateTrianglesTopography\CS\Command.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
187>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateTrianglesTopography\CS\TrianglesData.cs(23,7,23,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
187>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateTrianglesTopography\CS\Command.cs(40,28,40,44): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
187>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateTrianglesTopography\CS\Command.cs(38,6,38,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
187>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateTrianglesTopography\CS\Command.cs(39,6,39,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
187>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateTrianglesTopography\CS\Command.cs(38,44,38,52): error CS0103: The name 'Autodesk' does not exist in the current context
187>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateTrianglesTopography\CS\Command.cs(39,45,39,53): error CS0103: The name 'Autodesk' does not exist in the current context
187>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateTrianglesTopography\CS\Command.cs(58,39,58,58): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
187>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateTrianglesTopography\CS\Command.cs(58,92,58,102): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
187>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateTrianglesTopography\CS\Command.cs(58,24,58,30): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
187>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CreateTrianglesTopography\CS\TrianglesData.cs(40,22,40,25): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
189>------ Rebuild All started: Project: Custom2DExporter, Configuration: Debug Any CPU ------
189>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
189>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
189>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
189>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\Utilities.cs(3,7,3,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
189>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\Command.cs(28,7,28,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
189>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\Command.cs(29,7,29,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
189>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\Command.cs(30,7,30,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
189>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\TessellatedGeomAndText2DExportContext.cs(7,7,7,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
189>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\Utilities.cs(17,38,17,41): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
189>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\Utilities.cs(17,53,17,56): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
189>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\Utilities.cs(32,40,32,44): error CS0246: The type or namespace name 'View' could not be found (are you missing a using directive or an assembly reference?)
189>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\Utilities.cs(32,14,32,19): error CS0246: The type or namespace name 'Plane' could not be found (are you missing a using directive or an assembly reference?)
189>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\Utilities.cs(45,29,45,33): error CS0246: The type or namespace name 'View' could not be found (are you missing a using directive or an assembly reference?)
189>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\Utilities.cs(45,46,45,49): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
189>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\Utilities.cs(80,33,80,37): error CS0246: The type or namespace name 'View' could not be found (are you missing a using directive or an assembly reference?)
189>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\Utilities.cs(100,40,100,44): error CS0246: The type or namespace name 'View' could not be found (are you missing a using directive or an assembly reference?)
189>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\Utilities.cs(100,57,100,60): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
189>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\Command.cs(41,27,41,43): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
189>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\Command.cs(38,5,38,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
189>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\Command.cs(39,5,39,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
189>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\Command.cs(40,5,40,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
189>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\Command.cs(38,43,38,51): error CS0103: The name 'Autodesk' does not exist in the current context
189>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\Command.cs(39,44,39,52): error CS0103: The name 'Autodesk' does not exist in the current context
189>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\Command.cs(40,42,40,50): error CS0103: The name 'Autodesk' does not exist in the current context
189>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\Command.cs(48,33,48,41): error CS0246: The type or namespace name 'ViewType' could not be found (are you missing a using directive or an assembly reference?)
189>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\Command.cs(62,29,62,37): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
189>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\Command.cs(74,38,74,46): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
189>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\Command.cs(75,38,75,50): error CS0246: The type or namespace name 'DisplayStyle' could not be found (are you missing a using directive or an assembly reference?)
189>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\Command.cs(79,48,79,51): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
189>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\Command.cs(151,37,151,56): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
189>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\Command.cs(152,33,152,43): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
189>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\Command.cs(151,22,151,28): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
189>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\TessellatedGeomAndText2DExportContext.cs(25,50,25,66): error CS0246: The type or namespace name 'IExportContext2D' could not be found (are you missing a using directive or an assembly reference?)
189>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\TessellatedGeomAndText2DExportContext.cs(91,43,91,51): error CS0246: The type or namespace name 'ViewNode' could not be found (are you missing a using directive or an assembly reference?)
189>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\TessellatedGeomAndText2DExportContext.cs(91,14,91,30): error CS0246: The type or namespace name 'RenderNodeAction' could not be found (are you missing a using directive or an assembly reference?)
189>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\TessellatedGeomAndText2DExportContext.cs(96,29,96,38): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
189>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\TessellatedGeomAndText2DExportContext.cs(100,47,100,59): error CS0246: The type or namespace name 'InstanceNode' could not be found (are you missing a using directive or an assembly reference?)
189>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\TessellatedGeomAndText2DExportContext.cs(100,14,100,30): error CS0246: The type or namespace name 'RenderNodeAction' could not be found (are you missing a using directive or an assembly reference?)
189>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\TessellatedGeomAndText2DExportContext.cs(105,33,105,45): error CS0246: The type or namespace name 'InstanceNode' could not be found (are you missing a using directive or an assembly reference?)
189>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\TessellatedGeomAndText2DExportContext.cs(109,43,109,51): error CS0246: The type or namespace name 'LinkNode' could not be found (are you missing a using directive or an assembly reference?)
189>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\TessellatedGeomAndText2DExportContext.cs(109,14,109,30): error CS0246: The type or namespace name 'RenderNodeAction' could not be found (are you missing a using directive or an assembly reference?)
189>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\TessellatedGeomAndText2DExportContext.cs(114,29,114,37): error CS0246: The type or namespace name 'LinkNode' could not be found (are you missing a using directive or an assembly reference?)
189>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\TessellatedGeomAndText2DExportContext.cs(118,46,118,55): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
189>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\TessellatedGeomAndText2DExportContext.cs(118,14,118,30): error CS0246: The type or namespace name 'RenderNodeAction' could not be found (are you missing a using directive or an assembly reference?)
189>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\TessellatedGeomAndText2DExportContext.cs(123,32,123,41): error CS0246: The type or namespace name 'ElementId' could not be found (are you missing a using directive or an assembly reference?)
189>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\TessellatedGeomAndText2DExportContext.cs(127,48,127,59): error CS0246: The type or namespace name 'ElementNode' could not be found (are you missing a using directive or an assembly reference?)
189>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\TessellatedGeomAndText2DExportContext.cs(127,14,127,30): error CS0246: The type or namespace name 'RenderNodeAction' could not be found (are you missing a using directive or an assembly reference?)
189>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\TessellatedGeomAndText2DExportContext.cs(136,34,136,45): error CS0246: The type or namespace name 'ElementNode' could not be found (are you missing a using directive or an assembly reference?)
189>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\TessellatedGeomAndText2DExportContext.cs(142,43,142,51): error CS0246: The type or namespace name 'FaceNode' could not be found (are you missing a using directive or an assembly reference?)
189>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\TessellatedGeomAndText2DExportContext.cs(142,14,142,30): error CS0246: The type or namespace name 'RenderNodeAction' could not be found (are you missing a using directive or an assembly reference?)
189>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\TessellatedGeomAndText2DExportContext.cs(147,29,147,37): error CS0246: The type or namespace name 'FaceNode' could not be found (are you missing a using directive or an assembly reference?)
189>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\TessellatedGeomAndText2DExportContext.cs(151,39,151,48): error CS0246: The type or namespace name 'CurveNode' could not be found (are you missing a using directive or an assembly reference?)
189>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\TessellatedGeomAndText2DExportContext.cs(151,14,151,30): error CS0246: The type or namespace name 'RenderNodeAction' could not be found (are you missing a using directive or an assembly reference?)
189>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\TessellatedGeomAndText2DExportContext.cs(176,42,176,54): error CS0246: The type or namespace name 'PolylineNode' could not be found (are you missing a using directive or an assembly reference?)
189>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\TessellatedGeomAndText2DExportContext.cs(176,14,176,30): error CS0246: The type or namespace name 'RenderNodeAction' could not be found (are you missing a using directive or an assembly reference?)
189>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\TessellatedGeomAndText2DExportContext.cs(189,44,189,56): error CS0246: The type or namespace name 'FaceEdgeNode' could not be found (are you missing a using directive or an assembly reference?)
189>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\TessellatedGeomAndText2DExportContext.cs(189,14,189,30): error CS0246: The type or namespace name 'RenderNodeAction' could not be found (are you missing a using directive or an assembly reference?)
189>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\TessellatedGeomAndText2DExportContext.cs(205,50,205,68): error CS0246: The type or namespace name 'FaceSilhouetteNode' could not be found (are you missing a using directive or an assembly reference?)
189>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\TessellatedGeomAndText2DExportContext.cs(205,14,205,30): error CS0246: The type or namespace name 'RenderNodeAction' could not be found (are you missing a using directive or an assembly reference?)
189>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\TessellatedGeomAndText2DExportContext.cs(210,26,210,34): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
189>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\TessellatedGeomAndText2DExportContext.cs(216,27,216,36): error CS0246: The type or namespace name 'LightNode' could not be found (are you missing a using directive or an assembly reference?)
189>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\TessellatedGeomAndText2DExportContext.cs(220,25,220,32): error CS0246: The type or namespace name 'RPCNode' could not be found (are you missing a using directive or an assembly reference?)
189>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\TessellatedGeomAndText2DExportContext.cs(224,30,224,42): error CS0246: The type or namespace name 'MaterialNode' could not be found (are you missing a using directive or an assembly reference?)
189>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\TessellatedGeomAndText2DExportContext.cs(228,30,228,46): error CS0246: The type or namespace name 'PolymeshTopology' could not be found (are you missing a using directive or an assembly reference?)
189>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\TessellatedGeomAndText2DExportContext.cs(232,33,232,44): error CS0246: The type or namespace name 'LineSegment' could not be found (are you missing a using directive or an assembly reference?)
189>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\TessellatedGeomAndText2DExportContext.cs(243,38,243,54): error CS0246: The type or namespace name 'PolylineSegments' could not be found (are you missing a using directive or an assembly reference?)
189>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\TessellatedGeomAndText2DExportContext.cs(72,62,72,65): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
189>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\TessellatedGeomAndText2DExportContext.cs(31,21,31,24): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
189>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\CustomExporter\Custom2DExporter\CS\TessellatedGeomAndText2DExportContext.cs(44,7,44,14): error CS0246: The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)
190>------ Rebuild All started: Project: ViewTemplateCreation, Configuration: Debug Any CPU ------
188>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
188>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
188>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
188>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs(31,7,31,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
188>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs(32,7,32,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
188>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs(33,7,33,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
188>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs(34,7,34,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
188>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs(35,7,35,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
188>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs(36,7,36,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
188>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs(67,27,67,43): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
188>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs(64,5,64,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
188>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs(65,5,65,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
188>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs(66,5,66,13): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
188>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs(64,43,64,51): error CS0103: The name 'Autodesk' does not exist in the current context
188>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs(65,44,65,52): error CS0103: The name 'Autodesk' does not exist in the current context
188>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs(66,42,66,50): error CS0103: The name 'Autodesk' does not exist in the current context
188>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs(86,37,86,56): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
188>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs(87,33,87,43): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
188>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs(86,22,86,28): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
188>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs(136,72,136,82): error CS0246: The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)
188>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs(169,68,169,78): error CS0246: The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)
188>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs(211,82,211,92): error CS0246: The type or namespace name 'UIDocument' could not be found (are you missing a using directive or an assembly reference?)
188>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs(337,89,337,97): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
188>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs(337,103,337,111): error CS0246: The type or namespace name 'ViewPlan' could not be found (are you missing a using directive or an assembly reference?)
188>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs(275,54,275,58): error CS0246: The type or namespace name 'Room' could not be found (are you missing a using directive or an assembly reference?)
188>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs(275,70,275,73): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
188>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs(320,56,320,60): error CS0246: The type or namespace name 'Room' could not be found (are you missing a using directive or an assembly reference?)
188>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs(320,27,320,30): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
188>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs(392,78,392,86): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
188>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs(392,92,392,100): error CS0246: The type or namespace name 'ViewPlan' could not be found (are you missing a using directive or an assembly reference?)
188>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs(392,116,392,120): error CS0246: The type or namespace name 'Room' could not be found (are you missing a using directive or an assembly reference?)
188>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs(392,134,392,137): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
188>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs(450,49,450,57): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
188>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs(450,63,450,71): error CS0246: The type or namespace name 'ViewPlan' could not be found (are you missing a using directive or an assembly reference?)
188>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs(450,87,450,90): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
188>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs(450,110,450,113): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
188>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs(493,68,493,76): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
188>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs(493,82,493,90): error CS0246: The type or namespace name 'ViewPlan' could not be found (are you missing a using directive or an assembly reference?)
188>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs(493,101,493,105): error CS0246: The type or namespace name 'Room' could not be found (are you missing a using directive or an assembly reference?)
188>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs(493,117,493,120): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
188>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs(523,66,523,74): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
188>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs(523,80,523,88): error CS0246: The type or namespace name 'ViewPlan' could not be found (are you missing a using directive or an assembly reference?)
188>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs(523,99,523,103): error CS0246: The type or namespace name 'Room' could not be found (are you missing a using directive or an assembly reference?)
188>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs(523,110,523,113): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
188>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs(225,35,225,51): error CS0246: The type or namespace name 'ISelectionFilter' could not be found (are you missing a using directive or an assembly reference?)
188>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs(227,35,227,42): error CS0246: The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)
188>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs(236,37,236,46): error CS0246: The type or namespace name 'Reference' could not be found (are you missing a using directive or an assembly reference?)
188>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs(236,54,236,57): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
188>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs(246,35,246,51): error CS0246: The type or namespace name 'ISelectionFilter' could not be found (are you missing a using directive or an assembly reference?)
188>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs(248,35,248,42): error CS0246: The type or namespace name 'Element' could not be found (are you missing a using directive or an assembly reference?)
188>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs(257,37,257,46): error CS0246: The type or namespace name 'Reference' could not be found (are you missing a using directive or an assembly reference?)
188>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs(257,54,257,57): error CS0246: The type or namespace name 'XYZ' could not be found (are you missing a using directive or an assembly reference?)
188>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\PathOfTravel\CS\Command.cs(540,22,540,51): error CS0246: The type or namespace name 'PathOfTravelCalculationStatus' could not be found (are you missing a using directive or an assembly reference?)
190>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
190>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAPIUI". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
190>C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets(2110,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "RevitAddInUtility". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
190>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewTemplateCreation\CS\Command.cs(25,7,25,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
190>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewTemplateCreation\CS\Command.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
190>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewTemplateCreation\CS\ViewTemplateCreationForm.cs(26,7,26,15): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
190>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewTemplateCreation\CS\Command.cs(36,27,36,43): error CS0246: The type or namespace name 'IExternalCommand' could not be found (are you missing a using directive or an assembly reference?)
190>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewTemplateCreation\CS\Command.cs(33,6,33,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
190>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewTemplateCreation\CS\Command.cs(34,6,34,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
190>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewTemplateCreation\CS\Command.cs(35,6,35,14): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
190>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewTemplateCreation\CS\Command.cs(33,44,33,52): error CS0103: The name 'Autodesk' does not exist in the current context
190>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewTemplateCreation\CS\Command.cs(34,45,34,53): error CS0103: The name 'Autodesk' does not exist in the current context
190>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewTemplateCreation\CS\Command.cs(35,43,35,51): error CS0103: The name 'Autodesk' does not exist in the current context
190>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewTemplateCreation\CS\Command.cs(54,39,54,58): error CS0246: The type or namespace name 'ExternalCommandData' could not be found (are you missing a using directive or an assembly reference?)
190>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewTemplateCreation\CS\Command.cs(54,92,54,102): error CS0246: The type or namespace name 'ElementSet' could not be found (are you missing a using directive or an assembly reference?)
190>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewTemplateCreation\CS\Command.cs(54,24,54,30): error CS0246: The type or namespace name 'Result' could not be found (are you missing a using directive or an assembly reference?)
190>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewTemplateCreation\CS\ViewTemplateCreationForm.cs(125,15,125,19): error CS0246: The type or namespace name 'View' could not be found (are you missing a using directive or an assembly reference?)
190>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewTemplateCreation\CS\ViewTemplateCreationForm.cs(136,51,136,55): error CS0246: The type or namespace name 'View' could not be found (are you missing a using directive or an assembly reference?)
190>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewTemplateCreation\CS\ViewTemplateCreationForm.cs(146,40,146,44): error CS0246: The type or namespace name 'View' could not be found (are you missing a using directive or an assembly reference?)
190>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewTemplateCreation\CS\ViewTemplateCreationForm.cs(169,15,169,30): error CS0246: The type or namespace name 'ViewDetailLevel' could not be found (are you missing a using directive or an assembly reference?)
190>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewTemplateCreation\CS\ViewTemplateCreationForm.cs(175,51,175,55): error CS0246: The type or namespace name 'View' could not be found (are you missing a using directive or an assembly reference?)
190>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewTemplateCreation\CS\ViewTemplateCreationForm.cs(192,42,192,46): error CS0246: The type or namespace name 'View' could not be found (are you missing a using directive or an assembly reference?)
190>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewTemplateCreation\CS\ViewTemplateCreationForm.cs(192,53,192,68): error CS0246: The type or namespace name 'BuiltInCategory' could not be found (are you missing a using directive or an assembly reference?)
190>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewTemplateCreation\CS\ViewTemplateCreationForm.cs(192,86,192,94): error CS0246: The type or namespace name 'Autodesk' could not be found (are you missing a using directive or an assembly reference?)
190>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewTemplateCreation\CS\ViewTemplateCreationForm.cs(192,127,192,145): error CS0246: The type or namespace name 'FillPatternElement' could not be found (are you missing a using directive or an assembly reference?)
190>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewTemplateCreation\CS\ViewTemplateCreationForm.cs(39,39,39,47): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
190>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewTemplateCreation\CS\ViewTemplateCreationForm.cs(219,20,219,24): error CS0246: The type or namespace name 'View' could not be found (are you missing a using directive or an assembly reference?)
190>Z:\a\src\rvt\RevitSdkSamples\SDK\Samples\ViewTemplateCreation\CS\ViewTemplateCreationForm.cs(220,15,220,23): error CS0246: The type or namespace name 'Document' could not be found (are you missing a using directive or an assembly reference?)
========== Rebuild All: 0 succeeded, 190 failed, 0 skipped ==========